LG 55LX9500 SAC34134205_1 User Manual Owner's Sac34134205 2 Eng

2010-08-14

User Manual: LG 55LX9500 Owner's Manual Most comprehensive of product setup and usage. (English)

Open the PDF directly: View PDF .
Page Count: 218 [warning: Documents this large are best viewed by clicking the View PDF Link!]

OWNER’S MANUAL

LED LCD TV / PLASMA TV

Please read this manual carefully before operating

your set and retain it for future reference.

P/NO : SAC34134205 (1004-REV02)www.lg.com

The model and serial number of the TV is located

on the back and one side of the TV.

Record it below should you ever need service.

MODEL

SERIAL

LED LCD TV MODELS

47LX9500

55LX9500

47LEX8

55LEX8

60LEX9

72LEX9

PLASMA TV MODELS

50PK950

60PK950

WARNING / CAUTION

The lightning flash with arrowhead

symbol, within an equilateral trian-

gle, is intended to alert the user to

the presence of uninsulated “dan-

gerous voltage” within the product’s enclo-

sure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equi-

lateral triangle is intended to alert

the user to the presence of important oper-

ating and maintenance (servicing) instruc-

tions in the literature accompanying the

appliance.

TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guide-

lines for proper grounding and, in particular, speci-

fies that the cable ground shall be connected to the

grounding system of the building, as close to the

point of the cable entry as practical.

WARNING / CAUTION

To prevent fire or shock hazards, do not expose

this product to rain or moisture.

FCC Notice

Class B digital device

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable pro-

tection against harmful interference in a residen-

tial installation. This equipment generates, uses

and can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encour-

aged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equip-

ment and receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is con-

nected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC

Rules.

Operation is subject to the following two condi-

tions: (1) This device may not cause (harmful)

interference, and (2) this device must accept

any interference received, including interference

that may cause undesired operation (of the

device).

Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void

the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any

way without written authorization from LG

Electronics.

Unauthorized modification could void the user’s

authority to operate this product.

SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

1Do not use this apparatus near water.

2Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other appa-

ratus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has

two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong, The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an elec-

trician for replacement of the obsolete outlet.

6Protect the power cord from being walked

on or pinched particularly at plugs, conve-

nience receptacles, and the point where

they exit from the apparatus.

7Only use attachments/accessories speci-

fied by the manufacturer.

8Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is

used, use caution when moving the cart/

apparatus combination to avoid injury from

tip-over.

9Unplug this apparatus during lighting

storms or when unused for long periods

of time.

Refer all servicing to qualified service per-

sonnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is dam-

aged, liquid has been spilled or objects

have fallen into the apparatus, the appara-

tus has been exposed to rain or moisture,

does not operate normally, or has been

dropped.

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Never touch this apparatus or antenna during

a thunder or lighting storm.

When mounting a TV on the wall, make sure

not to install the TV by the hanging power

and signal cables on the back of the TV.

Do not allow an impact shock or any objects

to fall into the product, and do not drop onto

the screen with something.

CAUTION concerning the Power Cord:

It is recommend that appliances be placed

upon a dedicated circuit; that is, a single

outlet circuit which powers only that appli-

ance and has no additional outlets or

branch circuits. Check the specification page

of this owner's manual to be certain.

Do not connect too many appliances to the

same AC power outlet as this could result in

fire or electric shock.

Do not overload wall outlets. Overloaded wall

outlets, loose or damaged wall outlets, exten-

sion cords, frayed power cords, or damaged

or cracked wire insulation are dangerous . Any

of these conditions could result in electric

shock or fire. Periodically examine the cord of

your appliance, and if its appearance indicates

damage or deterioration, unplug it, discon-

tinue use of the appliance, and have the cord

replaced with an exact replacement part by

an authorized servicer. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the

cord exits the appliance.

Do not use a damaged or loose power cord.

Do not pull on the power cord to unplug the

TV. Grasp the plug when unplugging the

power cord.

WARNING - To reduce the risk of fire or elec-

trical shock, do not expose this product to

rain, moisture or other liquids. Do not touch

the TV with wet hands. Do not install this

product near flammable objects such as

gasoline or candles or expose the TV to

direct air conditioning.

Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the appara-

tus (e.g. on shelves above the unit).

GROUNDING

Ensure that you connect the earth ground

wire to prevent possible electric shock (i.e. a

TV with a three-prong grounded AC plug

must be connected to a three-prong ground-

ed AC outlet). If grounding methods are not

possible, have a qualified electrician install a

separate circuit breaker.

Do not try to ground the unit by connecting it

to telephone wires, lightening rods, or gas

pipes.

Power

Supply

Short-circuit

Breaker

DISCONNECTING DEVICE FROM MAINS

Mains plug is the disconnecting device. The

plug must remain readily operable.

As long as this unit is connected to the AC

wall outlet, it is not disconnected from AC

power even if you turn off the power switch

on the unit.

ANTENNAS

Outdoor antenna grounding

If an outdoor antenna is installed, follow the

precautions below. An outdoor antenna sys-

tem should not be located in the vicinity of

overhead power lines or other electric light or

power circuits, or where it can come in contact

with such power lines or circuits as death or

serious injury can occur.

Be sure the antenna system is grounded so as

to provide some protection against voltage

surges and built-up static charges.

Section 810 of the National Electrical Code

(NEC) in the U.S.A. provides information with

respect to proper grounding of the mast and

supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of

grounding conductors, location of antenna

discharge unit, connection to grounding elec-

trodes and requirements for the grounding

electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Ground Clamps

Power Service Grounding

Electrode System (NEC

Art 250, Part H)

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

Cleaning

When cleaning, unplug the power cord and

rub gently with a soft cloth to prevent

scratching. Do not spray water or other liquids

directly on the TV as electric shock may occur.

Do not clean with chemicals such as alcohol,

thinners or benzene.

Moving

Make sure the product is turned off, unplugged

and all cables have been removed. It may take

2 or more people to carry larger TVs. Do not

press against or put stress on the front panel

of the TV.

Ventilation

Install your TV where there is proper ventila-

tion. Do not install in a confined space such

as a bookcase. Do not cover the product

with cloth or other materials (e.g.) plastic

while plugged in. Do not install in exces-

sively dusty places.

Take care not to touch the ventilation open-

ings. When watching the TV for a long

period, the ventilation openings may

become hot.

If you smell smoke or other odors coming

from the TV or hear strange sounds, unplug

the power cord contact an authorized service

center.

Do not press strongly upon the panel with

hand or sharp object such as nail, pencil or

pen, or make a scratch on it.

Keep the product away from direct sunlight.

For LED LCD TV

If the TV feels cold to the touch, there may be

a small “flicker” when it is turned on. This is

normal, there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the monitor's performance.

Avoid touching the LCD screen or holding

your finger(s) against it for long periods of

time. Doing so may produce some tempo-

rary distortion effects on the screen.

WARNING / CAUTION

............................2

SAFETY INSTRUCTIONS

........................3

CONTENTS

......................................................6

FEATURE OF THIS TV

............................. 8

PREPARATION

Accessories ...........................................................10

Optional Extras .....................................................11

Front Panel Information ....................................12

Back Panel Information .....................................15

Stand Instructions

......................................................18

VESA Wall Mounting ........................................22

Cable Management ..........................................24

Desktop Pedestal Installation .........................26

Swivel Stand ........................................................26

Kensington Security System ..........................26

Securing the TV to the wall to prevent falling

when the tv is used on a stand ..................... 27

Antenna or Cable Connection .......................28

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup ............................................29

DVD SETUP .........................................................33

VCR SETUP .........................................................36

Other A/V Source Setup .................................38

USB Connection ................................................38

Headphone Setup

....................................................39

Audio Out Connection .....................................40

External Equipment WIreless Connection

(Optional Extras) ..................................................41

PC Setup ..............................................................42

Network Setup .................................................... 47

WATCHING TV / CHANNEL CONTROL

Remote Control Functions ..............................55

Magic Motion Remote Control Functions...58

Turning on the TV ...............................................61

Channel Selection...............................................61

Volume Adjustment ...........................................61

Initial Setting .......................................................62

On-Screen Menus Selection ..........................64

Quick Menu .........................................................66

Home Menu ........................................................ 67

Customer Support

- Software Update .............................................68

- Picture Test/Sound Test ................................69

- Product/Service Info. .....................................70

- Network Test ...................................................... 71

Simple Manual .................................................... 72

Channel Setup

- Auto Scan (Auto Tuning) .............................. 73

- Add/Delete Channel (Manual Tuning) ..... 74

- Channel Editing ............................................... 75

Channel List ........................................................ 76

Favorite Channel Setup .................................... 77

Channel Information ......................................... 78

Channel Brief Information ...............................79

Input List ............................................................. 80

Input Label ............................................................81

Reset to Factory Default (Initial Setting) .....82

Mode Setting ......................................................83

Demo Mode ........................................................84

AV Mode ...............................................................85

Game/Schedule .................................................86

SIMPLINK .............................................................90

3D VIDEO

3D Video ...............................................................92

Watching 3D Video ...........................................94

MY MEDIA

Entry Mode ..........................................................96

Connection Method .......................................... 97

Movie list .............................................................102

Photo list .............................................................109

Music list .............................................................. 115

DivX Registration Code ..................................120

Deactivation ........................................................ 121

NETWORK

Legal Notice ...................................................... 122

CONTENTS

NETCAST

Netcast Menu .................................................... 123

YOUTUBE ........................................................... 124

PICASA ............................................................... 126

PICTURE CONTROL

Picture Size (Aspect Ratio) Control ............ 128

Picture Wizard ...................................................130

󰌛Energy Saving ............................................ 132

Preset Picture Settings (Picture Mode) ..... 133

Manual Picture Adjustment - User Mode 134

Picture Improvement Technology (Advanced

Control) ............................................................... 135

Expert Picture control ..................................... 136

Picture Reset ..................................................... 139

TruMotion .........................................................140

LED Local Dimming ........................................141

Power Indicator ................................................ 142

Image Sticking Minimization (ISM) Method

. 143

SOUND & LANGUAGE CONTROL

Auto Volume ...................................................... 144

Clear Voice II ..................................................... 145

Balance ............................................................... 146

Preset Sound Settings (Sound Mode) .......147

Sound Setting Adjustment - User Mode . 148

Audio Reset ....................................................... 149

TV Speakers On/Off Setup ..........................150

Stereo/SAP Broadcast Setup ....................... 151

Audio Language ............................................. 152

On-screen Menus Language Selection .... 153

Caption Mode

- Analog Broadcasting System Captions . 154

- Digital Broadcasting System Captions ... 155

- Caption Option .............................................. 156

TIME SETTING

Clock Setting

- Auto Clock Setup ..........................................157

- Manual Clock Setup .................................... 158

Auto On/Off Time Setting ............................ 159

Sleep Timer Setting ........................................160

PARENTAL CONTROL / RATINGS

Set Password & Lock System

- Setting up Your Password ............................161

- Set Password ................................................. 162

Lock System ...................................................... 163

Channel Blocking ............................................. 164

Movie & TV Rating .......................................... 165

Downloadable Rating .......................................170

External Input Blocking ....................................171

Key Lock ..............................................................172

APPENDIX

Troubleshooting .................................................173

Maintenance .......................................................176

Product Specifications ....................................177

IR Codes .............................................................180

External Control Through RS-232C .......... 182

Open Source License .....................................188

FEATURE OF THIS TV

󰋬

Some of these features are not available on all models.

This TV contains the detailed cali-

brations necessary for professional

certification by the Imaging Science

Foundation. The resulting ISF “day”

and “night” modes will then be

accessible by the user to experi-

ence the best their LG HDTV has to

offer.

Sophisticated and detailed calibra-

tions can be made through the

ISFccc mode.

Detailed calibration requires a

licensed technician.

Please contact your local dealer to

inquire about an ISF certified tech-

nician.

THX (Thomlinson Holman’s

Experiment) is an audio and video

certification standard established

by George Lucas and Thomlinson.

A THX certified display guarantees

screen quality that exceeds the dis-

play standard specification in both

hardware and software.

A unique invisible speaker system

tuned by renowned audio expert,

Mr. Mark Levinson. Speakers are

embedded in strategic spots

behind the front cabinet and use

minute vibrations to turn the entire

front bezel into the speaker system.

The result s a clean, polished look,

and enhanced audio by increasing

the “sweet spot”, giving a wider and

richer sound field.

Unlike other sensors which can only

sense brightness of ambient light,

LG’s “Intelligent Sensor” uses

4,096 sensing steps to evaluate its

surroundings. Using a sophisticat-

ed algorithm, the LG processes

picture quality elements including

brightness, contrast, color, sharp-

ness and white balance. The result

is a picture optimized for it’s sur-

roundings, more pleasing to watch

and which can also save up to 50%

in power consumption.

TruSurround XT

High-definition television. High-

resolution digital television broad-

cast and playback system com-

posed of roughly a million or more

pixels, 16:9 aspect-ratio screens,

and AC3 digital audio. A subset of

digital television, HDTV formats

include 1080p, 1080i, and 720p

resolutions.

Manufactured under license from

Dolby Laboratories. “Dolby “and the

double-D symbol are trademarks of

Dolby Laboratories.

HDMI, the HDMI logo and High-

Definition Multimedia Interface are

trademarks or registered trade-

marks of HDMI Licensing LLC."

Displays HDTV programs in full

1920 x 1080p resolution for a more

detailed picture.

ABOUT DIVX VIDEO: DivX® is a

digital video format created by

DivX,Inc. This is an official DivX

Certified device that plays DivX

video. Visit www.divx.com for more

information and software tools to

convert your files into DivX video.

ABOUT DIVX VIDEO-ON-

DEMAND: This DivX Certified®

device must be registered in order

to play DivX Video-on-Demand

(VOD) content. To generate the

registration code, locate the DivX

VOD section in the device setup

menu. Go to vod.divx.com with this

code to complete the registration

process and learn more about

DivX VOD.

“DivX Certified to play DivX video

up to HD 1080p, including premi-

um content”

“Pat. 7,295,673; 7,460,688;7,519,274”

IMPORTANT INFORMATION TO PREVENT “IMAGE

BURN / BURN-IN” ON YOUR TV SCREEN

󰋬

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed

on the TV for an extended period, it can become permanently imprinted on the screen. This

phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the man-

ufacturer’s warranty.

󰋬

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged

period (2 or more hours for LCD, 1 or more

hours for Plasma).

󰋬

Image burn can also occur on the letter-

boxed areas of your TV if you use the 4:3

aspect ratio setting for an extended period.

View videos and photos and listen

to music on your TV through USB

2.0 (‘videos’ dependent on model).

AV Mode is three preset picture

and audio settings. It allows the

viewer to quickly switch between

common settings. It includes

Cinema, Sports, and Game Modes.

Automatically enhances and ampli-

fies the sound of human voice fre-

quency range to help keep dia-

logue audible when background

noise swells.

PREPARATION

ACCESSORIES

PREPARATION

Ensure that the following accessories are included with your TV. If an accessory is missing, please con-

tact the dealer where you purchased the TV.

The accessories included may differ from the images below.

Option Extras

* Wipe spots on the exterior only with the

polishing cloth.

* Do not wipe roughly when removing

stains. Excessive pressure may cause

scratches or discoloration.

Polishing Cloth

Not included with all models

1.5V 1.5V

1,5Vcc 1,5Vcc

D-sub 15 pin Cable

When using the VGA (D-sub 15

pin cable) PC connection, the user

must use shielded signal interface

cables with ferrite cores to main-

tain standards compliance.

1.5V 1.5V

1,5Vcc 1,5Vcc

1.5V 1.5V

1,5Vcc 1,5Vcc

Owner’s Manual CD Manual,

Nero MediaHome 4

Essentials CD

Remote Control,

Batteries (AAA)

Motion Remote Control,

Strap,

Batteries (AA)

Ferrite Core

(Black)

Ferrite Core

(White)

Close to the wall plug.

Ferrite core can be used to reduce the electromagnetic

waves that may interfere with the TV. Install the Ferrite

core on the power cable close to the wall plug.

Ferrite core can be used to reduce the electromagnetic

wave when connecting the LAN cable. Place the ferrite

core far from TV and wind the LAN cable in the ferrite

core once.

1.5V 1.5V

1,5Vcc 1,5Vcc

PREPARATION

OPTIONAL EXTRAS

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

These devices only work with compatible LG LED LCD TV and Plasma TV.

Wireless Media Box

(AN-WL100W)

Wireless LAN for Broadband/

DLNA Adaptor

(AN-WF100)

47/55LX9500, 47/55LEX8, 60/72LEX9

Cable Holder

(Refer to p.25)

Component gender cable,

AV gender cable

Screws for stand assembly

(Refer to P.20)

x 4 x 4 x 2

(M4 x 12) (M4 x 22)

Plasma TV

Protection Cover

(Refer to P.19)

Cable Holder

(Refer to P.24)

x 2

Screws for stand assembly

(Refer to P.18)

(For 50PK950)

x 4 x 4

(M4 x 14) (M4 x 28)

Power Cord

1.5V 1.5V

1,5Vcc 1,5Vcc

Cable

Management Clip

(Refer to P.24)

Wireless LAN for

Broadband/DLNA Adaptor

(AN-WF100)

Stand Rear Cover

3D Glasses

(AG-S100)

(For 47/55LX9500)

PREPARATION

󰋬

Image shown may differ from your TV.

FRONT PANEL INFORMATION

50/60PK950

ENTER CH

VOL

INPUT

SPEAKER

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to the

surrounding conditions

ENTER CH

VOL

INPUT

Touch Button

You can operate the button just by touching the button lightly with your finger.

ENTER CH

VOL

INPUT

CHANNEL

(󰌝,󰌞)

Buttons

VOLUME

(+, -)

Buttons

ENTER

Button

INPUT

Button

POWER

Button

Power/Standby Indicator

Illuminates red in standby mode.

The lighting is off while the TV remains on.

PREPARATION

47/55LX9500

SPEAKER

Emitter

It is the part equipped with

the emitter exchanging sig-

nal with 3D glasses.

Please be careful not to

block the screen with objects

or people while watching a

3D Video.

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to

the surrounding conditions

VOL

ENTER

INPUT

CHANNEL (󰌞,󰌝)

Buttons

VOLUME (-, +)

Buttons

ENTER Button

INPUT Button

MENU Button

POWER Button

Power/Standby Indicator

(Can be adjusted using the Power Indicator

in the OPTION menu.►p.142)

PREPARATION

󰋬

Image shown may differ from your TV.

47/55LEX8, 60/72LEX9

VOL ENTERCH MENU INPUT

SPEAKER

Power/Standby Indicator

(Can be adjusted using the Power Indicator in

the OPTION menu.►p.142)

Remote Control Sensor

VOL ENTERCH MENU INPUT

CHANNEL

(󰌞,󰌝)

Buttons

VOLUME

(-, +)

Buttons

ENTER

Button

INPUT

Button

POWER

Button

Touch Button

You can operate the button just by touching the button lightly with your finger.

Intelligent Sensor

Adjusts picture according to

the surrounding conditions

Emitter

PREPARATION

BACK PANEL INFORMATION

󰋬

Image shown may differ from your TV.

ANTENNA

/CABLE

RGB IN (PC)

LAN

WIRELESS

CONTROL

REMOTE CONTROL IN

AUDIO IN

(RGB/DVI)

PTICAL

DIGITAL

AUDIO OUT

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT IN

AV IN 1

YL R

PBPR

DVI IN 4

USB IN 1 USB IN 2

AV IN 2

VIDEO

AUDIO

L(MONO)

RS-232C IN

(CONTROL &

SERVICE)

ANTENNA

/CABLE

RGB IN (PC)

LAN

WIRELESS

CONTROL

REMOTE CONTROL IN

AUDIO IN

(RGB/DVI)

PTICAL

DIGITAL

AUDIO OUT

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT IN

AV IN 1

YL R

PBPR

DVI IN 4

USB IN 1 USB IN 2

AV IN 2

VIDEO

AUDIO

L(MONO)

RS-232C IN

(CONTROL &

SERVICE)

ANTENNA

/CABLE

RGB IN (PC)

LAN

WIRELESS

CONTROL

REMOTE CONTROL IN

AUDIO IN

(RGB/DVI)

PTICAL

DIGITAL

AUDIO OUT

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT IN

AV IN 1

YL R

PBPR

DVI IN 4

USB IN 1 USB IN 2

AV IN 2

VIDEO

AUDIO

L(MONO)

RS-232C IN

(CONTROL &

SERVICE)

50/60PK950

2 3 45

7813

RS-232C IN

(CONTROL &

SERVICE)

RS-232C IN

(

SERVICE ONLY)

SERVICE ONLY

PREPARATION

47/55LX9500, 47/55LEX8, 60/72LEX9

ANTENNA/

CABLE IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

OPTICAL DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO IN

AUDIO OUT

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

1 2 3 4

8 79

ANTENNA/

CABLE IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

OPTICAL DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO IN

AUDIO OUT

COMPONENT IN3

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

RS-232C IN

(

SERVICE ONLY)

AV IN2

VIDEO / AUDIO

ꔡ

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

OPTICAL DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO IN

AUDIO OUT

RS-232C IN

(

SERVICE ONLY)

RS-232C IN

(

SERVICE ONLY)

ꔡ

CAUTION

For HDMI IN 4 and USB IN 1, 2

► For an optimal connection,

HDMI cables and USB

devices should have bezels

less than 10 mm (0.39

inches) thick.

*A 10 mm (0.39 inches)

PREPARATION

1 LAN

Network connection for Netflix, Yahoo! TV

Widgets, etc (for USA).

Also used for video, photo and music files on

a local network.

2 HDMI/DVI IN, HDMI IN

Digital Connection.

Supports HD video and Digital audio. Doesn’t

support 480i.

Accepts DVI video using an adapter or HDMI

to DVI cable (not included).

3 RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin

cable (VGA cable).

AUDIO IN (RGB/DVI)

0.32 cm (1/8 inch) headphone jack for analog

PC audio input.

RS-232C IN (CONTROL & SERVICE) or

SERVICE ONLY

Used by third party devices.

This port is used for service or Hotel mode.

5 OPTICAL DIGITAL AUDIO OUT

Digital optical audio output for use with amps

and home theater systems.

Note: In standby mode, this port doesn’t work.

6 AV (Audio/Video) IN

Analog composite connection.

Supports standard definition video only (480i).

7 ANTENNA/CABLE IN

Connect over-the-air or cable signals to this

jack.

8 COMPONENT IN

Analog Connection.

Supports HD.

Uses a red, green, and blue cable for video &

red and white for audio.

9 WIRELESS CONTROL

Connect the Wireless Ready Dongle to the TV

to control the external input devices con-

nected to Media Box wirelessly.

10 USB INPUT

Used for viewing photos, watching movies

and listening to MP3s.

11 HEADPHONE

0.32 cm (1/8 inch) headphone jack

Impedance 16 Ω , Maximum audio out 15 mW

12 Power Cord or Socket

For operation with AC power.

Caution: Never attempt to operate the TV on

DC power.

13 REMOTE CONTROL IN

For a wired remote control.

PREPARATION

STAND INSTRUCTIONS

(For 50/60PK950)

󰋬

Image shown may differ from your TV.

INSTALLATION (For 50PK950)

NOTE

► When assembling the desk type stand,

make sure the screws are fully tightened (If

not tightened fully, the TV can tilt forward

after the product installation). Do not over

tighten.

1Carefully place the TV screen side down on

a cushioned surface to protect the screen

from damage.

2Assemble the parts of the STAND BODY

with the STAND BASE of the TV.

3Assemble the parts of the CABLE

MANAGEMENT CLIP with the STAND

BODY.

5Install the 4 screws into the holes shown.

M4 x 28

4Assemble the TV as shown.

STAND BASE

STAND BODY

CABLE

MANAGEMENT

CLIP

M4 x 14

PREPARATION

DETACHMENT

PROTECTION COVER

After removing the stand, install the included

PROTECTION COVER over the hole for the

stand.

Press the PROTECTION COVER into the TV until

you hear it click.

When installing the wall mounting bracket, use

the PROTECTION COVER.

1Carefully place the TV screen side down on

a cushioned surface to protect the screen

from damage.

2Remove the screws that

hold the stand on.

3Detach the stand from TV.

PROTECTION COVER

Fix a guide to the outside.

50PK950 60PK950

M4 x 30

M4 x 28

PREPARATION

STAND INSTRUCTIONS

(For 47/55LX9500, 47/55LEX8)

󰋬

Image shown may differ from your TV.

INSTALLATION

NOTE

► When assembling the desk type stand,

make sure the screws are fully tightened (If

not tightened fully, the TV can tilt forward

after the product installation). Do not over

tighten.

2Assemble the parts of the STAND

BODY with the STAND BASE of the

TV.

At this time, tighten the screws that

hold the STAND BODY on.

1Carefully place the TV screen side down on

a cushioned surface to protect the screen

from damage.

4Assemble the part of the STAND

REAR COVER with the TV.

3Install the 4 screws into the holes shown.

M4 x 22

M4 x 12

STAND BODY

STAND BASE

STAND REAR

COVER

PREPARATION

DETACHMENT

1Carefully place the TV screen side down on

a cushioned surface to protect the screen

from damage.

3Remove the screws that hold the stand on.

2Detach the STAND REAR COVER from TV.

4Detach the stand from TV.

PREPARATION

VESA WALL MOUNTING

Install your wall mount onto wooden studs perpendicular to the floor. When attaching to other building

materials, please contact a professional.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.

LG recommends that wall mounting be performed by a qualified professional installer.

Model

VESA (A * B)

Standard

Screw Quantity Wall Mounting Bracket

(sold separately)

47LX9500,

47LEX8 200 * 200 M6 4

LSW200B, LSW200BG,

LSW200BX, LSW200BXG

55LX9500,

55LEX8 400 * 400 M6 4

LSW400B, LSW400BG

50PK950 400 * 400 M6 4

AW-50PG60M AW-50PG60MS

60PK950 600 * 400 M8 4

AW-60PG60M AW-60PG60MS

PREPARATION

CAUTION

► Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to

electric shock.

NOTE

► Screw length needed depends on the wall

mount used. For further information, refer to

the instructions included with the mount.

► Standard dimensions for wall mount kits are

shown in the table.

► When purchasing our wall mount kit, a detailed

installation manual and all parts necessary for

assembly are provided.

► Do not use screws longer than the standard

dimension, as they may cause damage to the

inside to the TV.

► For wall mounts that do not comply with the

VESA standard screw specifications, the length

of the screws may differ depending on their

specifications.

► Do not use screws that do not comply with the

VESA standard screw specifications.

Do not use fasten the screws too strongly, this

may damage the TV or cause the TV to a fall,

leading to personal injury. LG is not liable for

these kinds of accidents.

► LG is not liable for TV damage or personal

injury when a non-VESA or non specified wall

mount is used or the consumer fails to follow

the TV installation instructions.

PREPARATION

CABLE MANAGEMENT

󰋬

Image shown may differ from your TV.

Plasma TV

How to use the CABLE HOLDER

How to use the CABLE MANAGEMENT CLIP

1Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

2Install the CABLE MANAGEMENT CLIP

into the TV until clicking sound.

HOW TO REMOVE THE CABLE

MANAGEMENT CLIP

► Hold the CABLE MANAGEMENT CLIP with

both hands and pull it backward as shown.

1After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the

cables.

In case of the LAN cable, install as shown to reduce the electromagnetic wave.

CABLE HOLDER

PREPARATION

󰋬

Image shown may differ from your TV.

47/55LX9500, 47/55LEX8, 60/72LEX9

CABLE HOLDER

2After connecting the cables as necessary,

install the CABLE HOLDER as shown

and bundle the cables.

1Secure the power cord with the CABLE

HOLDER on the TV back cover.

It will help prevent the power cable from

being removed by accident.

PREPARATION

DESKTOP PEDESTAL INSTALLATION

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit

your viewing position.

󰋬

Image shown may differ from your TV.

For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.

10.1 cm (4 inch)

CAUTION

► Ensure adequate ventilation by following the clearance recommendations.

► Do not mount near or above any type of heat source.

KENSINGTON SECURITY SYSTEM

󰋬

This feature is not available for all models.

- The TV is equipped with a Kensington Security System con-

nector on the back panel. Connect the Kensington Security

System cable as shown below.

- For the detailed installation and use of the Kensington Security

System, refer to the user’s guide provided with the Kensington

Security System.

For further information, contact http://www.kensington.com,

the internet homepage of the Kensington company. Kensington

sells security systems for expensive electronic equipment such

as notebook PCs and LCD projectors.

NOTE: The Kensington Security System is an optional accessory.

PREPARATION

SECURING THE TV TO THE WALL TO PREVENT FALLING

WHEN THE TV IS USED ON A STAND

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.

Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward

direction, potentially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

󰋬

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the

picture.

* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the

bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket

that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

󰋬

Use a sturdy rope (sold separately) to tie the product. It is safer to tie the

rope so it becomes horizontal between the wall and the product.

󰋬

You should purchase necessary components to prevent the TV from tipping over (when not using a

wall mount).

󰋬

Image shown may differ from your TV.

NOTE

► Use a platform or cabinet strong enough and large enough to support the size and weight of

the TV.

► To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are

the same.

PREPARATION

ANTENNA OR CABLE CONNECTION

󰋬

To prevent damage do not connect to the power outlet until all connections are made between the

devices.

󰋬

Image shown may differ from your TV.

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wall

Antenna

Socket

Outdoor

Antenna

(VHF, UHF)

Cable TV

Wall Jack

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

RF Coaxial Wire (75 Ω)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire

when connecting the antenna.

Copper Wire

󰋬

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

󰋬

For much more information about antennas visit our Knowledgebase at http://lgknowledgebase.

com. Search for antenna.

ANTENNA/

CABLE IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

AUDIO IN

AUDIO OUT

RGB/DVI

RS-232C IN

(

SERVICE ONLY)

OPTICAL DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPR

IN 4

H/P USB IN 1 USB IN 2

AV IN 2

VIDEO

AUDIO

L/MONO

CABLE MANAGEMENT

AC IN

ꔡ

ANTENNA/

CABLE IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

AUDIO IN

AUDIO OUT

RGB/DVI

RS-232C IN

(

SERVICE ONLY)

OPTICAL DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPR

IN 4

H/P USB IN 1 USB IN 2

AV IN 2

VIDEO

AUDIO

L/MONO

CABLE MANAGEMENT

AC IN

ꔡ

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

󰋬

To prevent the equipment damage, never plug in any power cords until you have finished connecting all

equipment.

󰋬

mage shown may differ from your TV.

1. How to connect

1Connect the video outputs (Y, PB, PR) of the

digital set-top box to the COMPONENT IN

VIDEO 1, 2, or 3* jacks on the TV. Match the

jack colors (Y = green, PB = blue, and PR = red).

2Connect the audio output of the digital set-top

box to the COMPONENT IN AUDIO 1, 2, or 3*

jacks on the TV.

2. How to use

󰋬

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-

top box operation.)

󰋬

Select the Component1, Component2, or

Component3 input source on the TV using the

INPUT button on the remote control.

Component Connection

This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.

However, if you do receive digital signals from a digital set-top box or other digital external device.

EXTERNAL EQUIPMENT SETUP

L R

DVI OUTPUT

AUDIO

HDMI OUTPUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

RS-232C IN

(CONTROL&

SERVICE)

OPTICAL

DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

AV IN 1

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

Y PBPRL R

Y L RPBPR

/DVI IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

RS-232C IN

(CONTROL&

SERVICE)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO OUT

/DVI IN

(RGB/DVI)

AUDIO IN

OPTICAL DIGITAL

ꔡ

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

1 2

Y, CB/PB, CR/PR

Resolution Horizontal

Frequency(KHz)Vertical

Frequency(Hz)

720x480i 15.73 59.94

15.73 60.00

720x480p 31.47 59.94

31.50 60.00

1280x720p 44.96 59.94

45.00 60.00

1920x1080i

33.72 59.94

33.75 60.00

1920x1080p

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

* Component3: For LED LCD TV

EXTERNAL EQUIPMENT SETUP

L R

VIDEO

AUDIO

YLR PBPR

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

AV IN2

VIDEO / AUDIO

S-VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

L R

VIDEO

AUDIO

COMPONENT IN3

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

For LED LCD TV

EXTERNAL EQUIPMENT SETUP

HDMI Connection

1. How to connect

1Connect the digital set-top box to HDMI/DVI IN

1, 2, 3, or 4 jack on the TV.

2No separate audio connection is necessary.

HDMI supports both audio and video.

2. How to use

󰋬

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-

top box.)

󰋬

Select the HDMI1, HDMI2, HDMI3, or HDMI4 input

source on the TV using the INPUT

button on the

remote control.

NOTE

► If an HDMI cable doesn’t support High Speed HDMI,

it can cause flickers or no screen display. In this case

use the latest cables that support High Speed HDMI.

► HDMI Audio Supported Format: Dolby Digital (32 KHz, 44.1

KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)

HDMI-DTV

Resolution Horizontal

Frequency(KHz)Vertical

Frequency(Hz)

720x480p 31.47 59.94

31.50 60.00

1280x720p 44.96 59.94

45.00 60.00

1920x1080i

33.72 59.94

33.75 60.00

1920x1080p

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

L R

DVI OUTPUT

AUDIO

HDMI OUTPUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

RS-232C IN

(CONTROL&

SERVICE)

OPTICAL

DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

AV IN 1

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO

AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

Y PBPRL R

Y L RPBPR

/DVI IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

RS-232C IN

(CONTROL&

SERVICE)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO OUT

/DVI IN

(RGB/DVI)

AUDIO IN

OPTICAL DIGITAL

ꔡ

Y PBPRL

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

1. How to connect

1Connect the DVI output of the digital set-top

box to the HDMI/DVI IN 1, 2, 3, or 4* jack on

the TV.

2Connect the digital set-top box audio output to

the AUDIO IN (RGB/DVI) jack on the TV.

2. How to use

󰋬

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-

top box.)

󰋬

Select the HDMI1, HDMI2, HDMI3, or HDMI4* input

source on the TV using the INPUT

button on the

remote control.

NOTE

► A DVI to HDMI cable or adapter is required for this con-

nection. DVI doesn't support audio, so a separate audio

connection is necessary.

L R

DVI OUTPUT

AUDIO

HDMI OUTPUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

RS-232C IN

(CONTROL&

SERVICE)

OPTICAL

DIGITAL

/DVI IN

VIDEO

AUDIO

L(MONO)

AV IN 1

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

Y PBPRL R

Y L RPBPR

/DVI IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

RS-232C IN

(CONTROL&

SERVICE)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

Y PBPRL R

AUDIO OUT

/DVI IN

(RGB/DVI)

AUDIO IN

OPTICAL DIGITAL

ꔡ

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

* HDMI4: For Plasma TV

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Component Input ports

To get better picture quality, connect a DVD player

to the component input ports as shown below.

1. How to connect

1Connect the video outputs (Y, PB, PR) of the

DVD to the COMPONENT IN VIDEO 1, 2, or 3*

jacks on the TV.

Match the jack colors (Y = green, PB = blue, and

PR = red).

2Connect the audio outputs of the DVD to the

COMPONENT IN AUDIO 1, 2, or 3* jacks on the

TV.

2. How to use

󰋬

Turn on the DVD player, insert a DVD.

󰋬

Select the Component1, Component2, or

Component3 input source on the TV using the

INPUT button on the remote control.

󰋬

Refer to the DVD player’s manual for operating

instructions.

Component Connection

HDMI OUTPUT

RGB IN (PC)

LAN

WIRELESS

CONTRO

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

AV IN 1

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

Y PBPRL R

Y L RPBPR

/DVI IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO AUDIO

COMPONENT IN

AUDIO IN

AUDIO OUT

VIDEO

AUDIO

L(MONO)

AV IN 1

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

L R

VIDEO

AUDIO

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

* Component3: For LED LCD TV

Component ports on

the TV

Y PBPR

Video output ports

on DVD player

Y PBPR

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

L R

VIDEO

AUDIO

YLR PB

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

AV IN2

VIDEO / AUDIO

S-VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

L R

VIDEO

AUDIO

COMPONENT IN3

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

For LED LCD TV

EXTERNAL EQUIPMENT SETUP

Composite (RCA) Connection

1. How to connect

1Connect the AUDIO/VIDEO jacks between TV

and DVD. Match the jack colors (Video = yellow,

Audio Left = white, and Audio Right = red)

2. How to use

󰋬

Turn on the DVD player, insert a DVD.

󰋬

Select the AV1 or AV2 input source on the TV

using the INPUT button on the remote control.

󰋬

Refer to the DVD player's manual for operating

instructions.

HDMI OUTPUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

AV IN 1

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

Y PBPRL R

Y L RPBPR

/DVI IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO AUDIO

COMPONENT IN

AUDIO IN

AUDIO OUT

VIDEO

AUDIO

L(MONO)

AV IN 1

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

L R

VIDEO

AUDIO

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

L R

VIDEO

AUDIO

YLR PBPR

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

AV IN2

VIDEO / AUDIO

S-VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

L R

VIDEO

AUDIO

COMPONENT IN3

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

For LED LCD TV

EXTERNAL EQUIPMENT SETUP

HDMI OUTPUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

AV IN 1

AUDIO IN

AUDIO OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

VIDEO AUDIO

COMPONENT IN

Y PBPRL R

Y L RPBPR

/DVI IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO AUDIO

COMPONENT IN

AUDIO IN

AUDIO OUT

VIDEO

AUDIO

L(MONO)

AV IN 1

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

L R

VIDEO

AUDIO

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

HDMI Connection

1. How to connect

1Connect the HDMI output of the DVD to the

HDMI/DVI IN 1, 2, 3 or 4 jack on the TV.

2No separate audio connection is necessary.

HDMI supports both audio and video.

2. How to use

󰋬

Select the HDMI1, HDMI2, HDMI3, or HDMI4 input

source on the TV using the INPUT button on the

remote control.

󰋬

Refer to the DVD player's manual for operating

instructions.

NOTE

► If an HDMI cable doesn’t support High Speed HDMI,

it can cause flickers or no screen display. In this case

use the latest cables that support High Speed HDMI.

► HDMI Audio Supported Format: Dolby Digital (32 KHz, 44.1

KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)

EXTERNAL EQUIPMENT SETUP

VCR SETUP

Antenna Connection

RGB IN (PC)

LAN

WIRELESS

CONTROL

RGB/DVI

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

ANTENNA/

CABLE IN

S-VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

L R

S-VIDEO VIDEO

AUDIO

OUTPUT

SWITCH

ANT IN

ANT OUT

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO AUDIO

COMPONENT IN

AUDIO IN

AUDIO OUT

VIDEO

AUDIO

L(MONO)

AV IN 1

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

L R

VIDEO

AUDIO

Wall Jack

Antenna

1. How to connect

1Connect the RF antenna out socket

of the VCR to the ANTENNA/CABLE

IN socket on the TV.

2Connect the antenna cable to the RF

antenna in socket of the VCR.

2. How to use

󰋬

Set VCR output switch to 3 or 4 and

then tune TV to the same channel num-

ber.

󰋬

Insert a video tape into the VCR and

press PLAY on the VCR (Refer to the

VCR owner’s manual).

EXTERNAL EQUIPMENT SETUP

Composite (RCA) Connection

RGB IN (PC)

LAN

WIRELESS

CONTROL

RGB/DVI

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

ANTENNA/

CABLE IN

S-VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

L R

S-VIDEO VIDEO

AUDIO

OUTPUT

SWITCH

ANT IN

ANT OUT

RGB IN (PC)

LAN

WIRELESS

CONTRO

(RGB/DVI)

/DVI IN

VIDEO AUDIO

COMPONENT IN

AUDIO IN

AUDIO OUT

VIDEO

AUDIO

L(MONO)

AV IN 1

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

L R

VIDEO

AUDIO

1. How to connect

1Connect the AUDIO/VIDEO jacks between TV

and VCR. Match the jack colors (Video = yellow,

Audio Left = white, and Audio Right = red)

2. How to use

󰋬

Insert a video tape into the VCR and press PLAY

on the VCR. (Refer to the VCR owner’s manual.)

󰋬

Select the AV1 or AV2 input source on the TV

using the INPUT button on the remote control.

NOTE

► If you have a mono VCR, connect the audio cable

from the VCR to the AUDIO L/MONO jack of the TV.

L R

VIDEO

AUDIO

YLR PBPR

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

AV IN2

VIDEO / AUDIO

S-VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

L R

VIDEO

AUDIO

COMPONENT IN3

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

AUDIO / Y PB PR

IN 4

H/P USB IN 1 USB IN 2

VIDEO / AUDIO

COMPONENT IN3

AV IN2

For LED LCD TV

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

1. How to connect

1Connect the AUDIO/VIDEO jacks

between TV and external equipment.

Match the jack colors

(Video = yellow, Audio Left = white, and

Audio Right = red)

2. How to use

󰋬

Select the AV1 or AV2 input source on

the TV using the INPUT button on the

remote control.

󰋬

Operate the corresponding external

equipment.

USB CONNECTION

IN 4

AV IN 2

VIDEO

AUDIO

L(MONO)

H/P

USB IN 1 USB IN 2

Memory Key

1. How to connect

1 Connect the USB device to the USB

IN 1 or 2 jack on the side of TV.

2. How to use

󰋬

After connecting the USB IN jack, you

use the USB function. (►p.97)

AV IN 2

VIDEO

AUDIO

L(MONO)

H/P

IN 4

USB IN 1 USB IN 2

L R

VIDEO

Camcorder

Video Game Set

EXTERNAL EQUIPMENT SETUP

HEADPHONE SETUP (FOR LED LCD TV)

H/P

You can listen to the sound through headphones.

1. How to connect

1Plug headphones into the head-

phone socket.

2To adjust the headphone volume,

press the VOL +/- button. If you

press the MUTE button, the sound

from the headphone is switched off.

NOTE

►

AUDIO menu options are disabled when connecting

headphones.

►

When changing AV MODE with headphones connect-

ed, the change is applied to video but not to audio.

►

Optical Digital Audio Out is not available with head-

phones connected.

EXTERNAL EQUIPMENT SETUP

RGB IN (PC)

LAN

WIRELESS

CONTRO

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

AUDIO OUT CONNECTION

Send the TV’s audio to external audio equipment via the Audio Output port.

If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL

AUDIO OUT terminal on the back of TV to a Home Theater (or amp).

NOTE

► When connecting with external audio equipment, such

as amplifiers or speakers, you can turn the TV speakers

off in the menu. (►p.150)

CAUTION

► Do not look into the optical output port. Looking at

the laser beam may damage your vision.

► Audio with ACP (Audio Copy Protection) function may

block digital audio output.

1. How to connect

1Connect one end of the optical cable to the

TV port of OPTICAL DIGITAL AUDIO OUT.

2Connect the other end of the optical cable to

the digital audio input on the audio equip-

ment.

3Set the “TV Speaker option - Off” in the

AUDIO menu. (►p.150). See the external audio

equipment instruction manual for operation.

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT WIRELESS CONNECTION

(OPTIONAL EXTRAS)

LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately.

When you connect the wireless ready dongle (included with the media box) to the TV, external devices

can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.

RGB IN (PC)

LAN

(RGB/DVI)

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

WIRELESS

CONTROL

OUT

WIRELESS

CONTROL

/DVI IN

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

1. How to connect

1 Connect the WIRELESS CONTROL jack of the Wireless Ready Dongle to the WIRELESS

CONTROL jack on the TV.

2Connect HDMI OUT jack of the Wireless Ready Dongle to the HDMI IN jack on the TV.

2. How to use

󰋬

Select the desired input source on the TV using the INPUT button on the remote control.

󰋬

Refer to the Wireless Media Box manual for operating instructions.

NOTE

►When using the external device connected to the Wireless Media Box, some functions of the TV

menu may not work.

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

1. How to connect

1Connect the DVI output of the PC to the HDMI/

DVI IN 1, 2, 3, or 4* jack on the TV.

2Connect the PC audio output to the AUDIO IN

(RGB/DVI) jack on the TV.

2. How to use

󰋬

Turn on the PC and the TV.

󰋬

Select the HDMI1, HDMI2, HDMI3, or HDMI4* input

source on the TV using the INPUT button on the

remote control.

DVI OUTPUT AUDIO

LAN

WIRELESS

CONTROL

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO OUT

RGB IN (PC)

RGB OUTPUT

AUDIO

(RGB/DVI)

AUDIO IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

VIDEO

AUDIO

L(MONO)

VIDEO

AUDIO

COMPONENT INAV IN 1

AUDIO OUT

/DVI IN

(RGB/DVI)

AUDIO IN

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

Y PBPRL

OPTICAL DIGITAL

S-232C IN

(CONTROL&

RVICE)

ꔡ

* HDMI4: For Plasma TV

DVI OUTPUT AUDIO

LAN

WIRELESS

CONTRO

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO OUT

RGB IN (PC)

RGB OUTPUT

AUDIO

(RGB/DVI)

AUDIO IN

RGB IN (PC)

LAN

WIRELESS

CONTROL

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO OUT

/DVI IN

(RGB/DVI)

AUDIO IN

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

PC SETUP

This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV's set-

tings.

1. How to connect

1Connect the VGA output of the PC to the

RGB IN (PC) jack on the TV.

2Connect PC audio output to the AUDIO IN

(RGB/DVI) jack on the TV.

2. How to use

󰋬

Turn on the PC and the TV.

󰋬

Select the RGB-PC input source on the TV using

the INPUT button on the remote control.

VGA (D-Sub 15 Pin) Connection

EXTERNAL EQUIPMENT SETUP

Supported Display Specifications (RGB-PC, HDMI-PC)

NOTE

►To get the the best picture quality, adjust the PC graphics card to 1920x1080.

►Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.

►In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-

ness. If noise is present, change the PC output to another resolution, change the refresh rate to

another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

►Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become

permanently imprinted on the screen.

►The synchronization input form for Horizontal and Vertical frequencies is separate.

►Depending on the graphics card, some resolution settings may not allow the image to be posi-

tioned on the screen properly.

►If you experience overscan issues when using HDMI-PC 1920x1080, change aspect ratio to Just

scan.

►When selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu.

Resolution Horizontal

Frequency (KHz)Vertical

Frequency (Hz)

640x350 31.468 70.09

720x400 31.469 70.08

640x480 31.469 59.94

800x600 37.879 60.31

1024x768 48.363 60.00

1280x768 47.776 59.87

1360x768

47.712 60.015

1280x1024

63.981 60.02

1920x1080

RGB-PC

66.587 59.934

1920x1080

HDMI-PC

67.50 60.00

EXTERNAL EQUIPMENT SETUP

Screen Setup for PC mode

You can choose the resolution in RGB-PC mode.

The Position, Phase, and Size can also be adjusted.

You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.

Selecting Resolution

󰋢













Phase

Reset



󰋓󰌚

Select PICTURE.

ENTER

Select Screen (RGB-PC).

ENTER

Select Resolution.

ENTER

Select the desired resolution.

ENTER

 󰋓󰋚

󰋑

󰋚

   

   

   

  

  







R

W

EXTERNAL EQUIPMENT SETUP

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image

is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.

Auto Configure

Select PICTURE.

ENTER

Select Screen (RGB-PC).

ENTER

Select Auto Config. or

Reset.

ENTER

Select Yes.

ENTER

󰋬

If the position of the image is still not

correct, try Auto adjustment again.

󰋬

If picture needs to be adjusted again

after Auto adjustment in RGB-PC,

you can adjust the Position, Size or

Phase.









Phase

Reset



Yes 



󰋓󰌚

 󰋓󰋚

󰋑

󰋚

   

   

   

  

  







R

W

Returns Position, Size, and Phase to the default initial settings.

This feature operates only in RGB-PC mode.

Screen Reset (Reset to original initial values)









Phase

Reset



Yes 



󰋓󰌚

EXTERNAL EQUIPMENT SETUP

If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.

This feature operates only in RGB-PC mode.

Adjustment for screen Position, Size, and Phase

Select PICTURE.

ENTER

Select Screen (RGB-PC).

ENTER

Select Position, Size, or Phase.

ENTER

Make appropriate adjustments.

ENTER

󰋬

Position: This function is to adjust

picture to left/right and up/down as

you prefer.

󰋬

Size: This function is to minimize any

vertical bars or stripes visible on the

screen background. And the horizon-

tal screen size will also change.

󰋬

Phase: This function allows you to

remove any horizontal noise and

clear or sharpen the image of char-

acters.









Phase

Reset



󰋓󰌚

 󰋓󰋚

󰋑

󰋚

   

   

   

  

  







R

W



 



EXTERNAL EQUIPMENT SETUP

RGB IN (PC)

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

LAN

Y PBPRL R

OPTICAL DIGITAL

RS-232C IN

(CONTROL&

SERVICE)

ꔡ

Broadband modem

Router

Broadband Service

NETWORK SETUP

This TV can be connected to a local area network (LAN) via the LAN port. After making the physical

connection, the TV needs to be set up for network communication.

CAUTION

► Do not connect a modular phone cable to the LAN port.

► Since there are various connection methods, please follow the specifications of your telecommu-

nication carrier or internet service provider.

1. How to connect

1Connect the LAN port of the Modem or Router to the LAN port on the TV.

2. How to use

󰋬

Select “Network Setting” in the NETWORK menu.

󰋬

After connecting the LAN port, use the NETCAST menu.

󰋬

For more information about NETCAST setup and troubleshooting, visit http://lgknowledgebase.

com. Search for NETCAST.

Wired Network Connection

EXTERNAL EQUIPMENT SETUP

󰋬

This feature requires an always-on

broadband internet connection.

󰋬

You do not need to connect to a PC

to use this function.

󰋬

If Network Setting is not working,

check your network conditions. Check

the LAN cable and make sure your

router has DHCP turned on if you

wish to use the Auto Setting.

󰋬

If the Network Setting is not com-

pleted, network may not operate nor-

mally.

󰋬

IP Auto Setting: Select it if there is a

DHCP server on the local area net-

work (LAN) via wired connection, the

TV will automatically be allocated an

IP address. If you are using a router,

it (normally) will have the DHCP

server activated by default.

󰋬

IP Manual Setting: Select it if there is

no DHCP server on the network and

you want to set the IP address manu-

ally.

 󰋓󰋚

 

 





Wired Network Setup

Select NETWORK.

ENTER

Select Network Setting.

ENTER

Select Wired.

ENTER

If you already set Network Setting:

Select Resetting. The new connection

settings resets the current network

settings.

ENTER

Select IP Auto Setting or IP Manual

Setting.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

When Selecting IP Manual Setting:

IP addresses will need to be input

manually.

ENTER

Select Enter.

IP Auto Setting

If you already set the

Network Setting

IP Manual Setting

If wired and wireless networks are both available, wired is the preferred method.

After making a physical connection, a small number of home networks may require the TV network

settings to be adjusted.

For detail information, contact your internet provider or router manual.













 

󰋙 

󰋙 

󰋙 

󰋙 

󰌚



󰍀





 

󰋙 

󰋙 

󰋙 

󰋙 

󰌚



󰍀





  











󰍀

󰋚



Appeared when wired and

wireless are simultaneously

connected.

EXTERNAL EQUIPMENT SETUP

NOTE

► For more information about NETCAST setup

and troubleshooting, visit http://lgknowledge-

base.com. Search for NETCAST.

► Use a standard LAN cable with this TV. Cat5

or better with a RJ45 connector.

► Many network connection problems during set

up can often be fixed by re-setting the router

or modem. After connecting the player to the

home network, quickly power off and/or dis-

connect the power cable of the home network

router or cable modem. Then power on and/or

connect the power cable again.

► Depending on the internet service provider

(ISP), the number of devices that can receive

internet service may be limited by the appli-

cable terms of service. For details, contact

your ISP.

► LG is not responsible for any malfunction of

the TV and/or the internet connection feature

due to communication errors/malfunctions

associated with your broadband internet con-

nection, or other connected equipment.

► LG is not responsible for problems within your

internet connection.

► Some content available through the network

connection may not be compatible with the

TV. If you have questions about such content,

please contact the producer of the content.

► You may experience undesired results if the

network connection speed does not meet the

requirements of the content being accessed.

► Some internet connection operations may not

be possible due to certain restrictions set by

the Internet service provider (ISP) supplying

your broadband Internet connection.

► Any fees charged by an ISP including, without

limitation, connection charges are your respon-

sibility.

► A 10 Base-T or 100 Base-TX LAN port is

required for connection to this TV. If your inter-

net service does not allow for such a connec-

tion, you will not be able to connect the TV.

► A DSL modem is required to use DSL service

and a cable modem is required to use cable

modem service. Depending on the access

method of and subscriber agreement with

your ISP, you may not be able to use the inter-

net connection feature contained in this TV or

you may be limited to the number of devices

you can connect at the same time. (If your ISP

limits subscription to one device, this TV may

not be allowed to connect when a PC is

already connected.)

► The use of a “Router” may not be allowed or

its usage may be limited depending on the

policies and restrictions of your ISP. For details,

contact your ISP directly.

► The wireless network operates at 2.4 GHz

radio frequencies that are also used by other

household devices such as cordless tele-

phone, Bluetooth® devices, microwave oven,

and can be affected by interference from

them. It can be interrupted by the device

using 5Ghz radio frequencies. It is same

device with LG wireless media box, cordless

telephone, other Wi-Fi device.

► It may decrease the service speed using

Wireless network by surrounding wireless con-

dition.

► Turn off all unused network equipment in your

local home network. Some devices may gen-

erate network traffic.

► In some instances, placing the access point or

wireless router higher up away from the floor

may improve the reception.

► The reception quality over wireless depends

on many factors such as type of the access

point, distance between the TV and access

point, and the location of the TV.

► When connecting internet through the wired/

wireless sharing machine, it may interrupt the

connection because of the use limitation and

confirmation of service company.

► To connect wireless AP, an AP that supports

the wireless connection is necessary, and the

wireless connection function of the AP needs

to be activated. Please enquire to the AP sup-

plier for the possibility of AP wireless connec-

tions.

► Please verify the security settings of AP SSID

for wireless AP connection, and enquire to the

AP supplier for the AP SSID security settings.

► The TV can become slower or malfunction

with wrong settings of network equipments

(wired/wireless router, hub, etc). Please install

correctly by referring to the manual of the

equipment, and set the network.

►

When AP is set to include 802.11 n, and if

Encryption is designated as WEP(64/128bit)

or WPA(TKIP/AES), the connection may not

be possible. There may be different connec-

tion methods according to the AP manufac-

turers.

EXTERNAL EQUIPMENT SETUP

IN 4

AV IN 2

VIDEO

AUDIO

L(MONO)

H/P USB IN 1 USB IN 2

The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect

to a wireless lan network.

The network configuration and connection method may vary depending on the equipment in use and

the network environment. Refer to the setup instructions supplied with your access point or wireless

router for detailed connection steps and network settings.

1. How to connect

1Connect the “LG Wireless LAN for Broadband/DLNA Adaptor (LED LCD TV: sold sepa-

rately)” to the USB IN 1 or 2 port on the TV.

2. How to use

󰋬

Select “Network Setting” in the NETWORK menu.

󰋬

After connecting, you can use the NETCAST menu.

Wireless Network Connection

NOTE

►We recommend you use a wired network connection when available when viewing movies over the

network connection.

►When the wireless port of the router is used, there may be restrictions for some functions.

EXTERNAL EQUIPMENT SETUP

Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the

network.

Wireless Network Setup

ENTER

Scan the all available AP (Access

Point) or wireless routers within range

and display them as a list.

ENTER

Select an AP (Access Point) or

wireless router on the list.

(If your AP is locked, insert the

security key of AP).

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

ENTER

Input the security key of AP.

Select NETWORK.

ENTER

Select Network Setting.

ENTER

Select Wireless.

ENTER

If you already set Network

Setting: Select Resetting.

The new connection settings

resets the current network set-

tings.

ENTER

Select Setting from the AP list.

 󰋓󰋚

 

 























󰌚 󰍀

󰋚



󰌚 󰍀

󰋚



P1/1





ASW



󰋖





9Repeat step 4-5 on P.48.

If your AP is locked

If you already set the

Network Setting











󰍀

󰋚







 

󰌚 󰍀

 





 

󰋙 

󰋙 

󰋙 

󰋙 

󰌚



󰍀

Appeared when wired and wireless

are simultaneously connected.

EXTERNAL EQUIPMENT SETUP

If you want to connect the AP (Access Point) or router with PIN, use this feature.

Use the simple setting if your access point or wireless router supports a PIN or WPS (Wi-Fi Protected

Setup)

When a security code is already set

PIN (Personal Identification Number)

Simple setting (WPS-button mode)

󰋬

PIN number is the unique 8 digit number

of the dongle.











󰌚



󰍀

󰋚







󰌚



󰍀

󰋚



󰌚 󰍀

󰋚



P1/1





ASW



󰋖





2Connect the acccess point with PIN

mode.

ENTER

Select Connect.

RED

1Repeat step 1-6 on P.51.

3You can see the Network ID and Security Key

on your TV screen.

Enter the PIN number to your device.









󰌚 󰍀

󰋚

1Repeat step 1-4 on P.51. 3

ENTER

Select Connect.

ENTER

Select Simple setting (WPS-

button mode).

5Repeat step 4-5 on P.48.

4Repeat step 4-5 on P.48.

EXTERNAL EQUIPMENT SETUP

The below settings are only for connecting directly to a PC.

This is the same as connecting two PCs with a cross-over cable.

AD-hoc Mode

1Repeat step 1-3 on P.51.











󰌚 󰍀

󰋚







󰌚 󰍀

󰋚

 





󰌚 󰍀

󰋚





󰋖



ENTER

Select Setting AD-hoc net-

work.

ENTER

Select Enter.

ENTER

Select Connect to connect Ad-hoc

network.

You can see the Network ID and

Security Key on your TV screen.

Enter this Network ID and Security

Key to your device.

If a network may not operate,

change the setting information

using the RED button.

ENTER

Insert the IP address.

ENTER

Network setting is completed.

Select Close.





 

󰋙 

󰋙 

󰋙 

󰋙 

󰌚



󰍀









 



 

  



















󰋬

PC Setting

Internet Protocol(TCP/IP) of PC needs to be set

manually.

IP address, Subnet Mask, and default Gateway

can be set with your own discretion.

i.e) IP address: 192.168.0.1 / Subnet Mask:

255.255.255.0 / default Gateway: 192.168.0.10

󰋬

TV Setting

Verify IP address and gateway of PC.

Input Gateway address of PC to IP Address, and

IP Address of PC to Gateway, and select Enter.

i.e) IP address: 192.168.0.10 / Subnet Mask:

255.255.255.0 / default Gateway: 192.168.0.1

󰋬 Example of the PC setting that

supports a wireless network

1. Find a wireless network device in

your PC.

2. Select LGTV10 that appears in

the list. (Select the same name

as the network ID that appears

on your TV screen.)

3. Type 1111111111 in the Inserting

the security key dialog.

(Type the security key that

appears on your TV screen.)

EXTERNAL EQUIPMENT SETUP

Select NETWORK.

ENTER

Select Network Status.

ENTER

Check the newtwork status.

Network Status

󰋬

Setting: Return to the network set-

ting menu or wireless network setting

type menu.

󰋬

Test: Test the current network status

after setting the network.

󰋬

Close: Return to the previous menu.

 󰋓󰋚

 

 













󰌚 󰍀

󰋚

Wired Connection

Wireless Connection





 

󰋙 

󰋙 

󰋙 

󰋙 

󰌚



󰍀





  



WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

The remote control may differ from the images below.

WATCHING TV / CHANNEL CONTROL

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

RATIO

MUTE

BACK

WIDGETS

EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

FREEZE

Q.MENU

INFO

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

MUTE

BACK

WIDGETS

EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

L/R SELECT

Q.MENU

INFO RATIO

POWER Turns the TV on from standby or off to

standby.

LIGHT Illuminates the remote control buttons.

ENERGY SAVING

Adjusts the Energy Saving setting.

►p.132

AV MODE Toggles through preset Video and

Audio modes. ►p.85

INPUT Rotates through inputs.

Also switches the TV on from standby.

TV Returns to the last TV channel.

NUMBER button

— (DASH) Used to enter a program number for

multiple program channels such as 2-1,

2-2, etc.

LIST Displays the channel table.

FLASHBK Tunes to the last channel viewed.

VOLUME UP/

DOWN Adjusts the volume.

FAV Set up desired favorite channels list.

MARK Select the input to apply the Picture

Wizard settings. ►p.131

Use to mark or unmark a photo/music/

movie. ►p.105, 110, 116

RATIO Changes the aspect ratio. ►p.128

3D Used for viewing 3D video. ►p.94

CHAR/NUM Shifts the Character or Number in

internet settings.

MUTE Switches the sound on or off.

DELETE Delete the character or number on the

screen.

CHANNEL

UP/DOWN Changes the channel.

PAGE

UP/DOWN Moves from one full set of screen infor-

mation to the next one.

WATCHING TV / CHANNEL CONTROL

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

MUTE

BACK

WIDGETS

EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

L/R SELECT

Q.MENU

INFO RATIO

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

RATIO

MUTE

BACK

WIDGETS

EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

FREEZE

Q.MENU

INFO

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

BACK EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

Q.MENU

INFO

FREEZE

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

MUTE

BACK EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

L/R SELECT

Q.MENU

RATIO

INFO

MENU Displays the main menu or clears all

on-screen displays and return to TV

viewing.

NETCAST

Select the desired NETCAST menu

source.

►p.123

Q.MENU Opens the list of Quick Menu options.

►p.66

THUMBSTICK

(Up/Down/Left

Right/ENTER)

Navigates the on-screen menus and

adjusts the system settings to your

preference.

BACK Allows the user to move return one step

in an interactive application or other

user interaction function.

WIDGETS WIDGETS for showing or hiding the

Yahoo! Dock and accessing the Yahoo!

TV Widgets user experience.

INFO Displays channel information at the

bottom of the screen. ►p.78

EXIT Clears all on-screen displays and return

to TV viewing.

COLOR

BUTTON Access special functions in some

menus.

L/R SELECT Used for viewing 3D video. ►p.95

WATCHING TV / CHANNEL CONTROL

󰋬

Open the battery compartment cover on the back side and install

the batteries matching correct polarity.

󰋬

Install two 1.5V AAA batteries. Don’t mix old or used batteries

with new ones.

󰋬

Close cover.

Installing Batteries

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

RATIO

MUTE

BACK

WIDGETS

EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

FREEZE

Q.MENU

INFO

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

MUTE

BACK

WIDGETS

EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

L/R SELECT

Q.MENU

INFO RATIO

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

BACK EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

Q.MENU

INFO

FREEZE

ENERGY

CHVOL

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

SAVING

AV MODE

INPUT

LIGHT

FAV

MUTE

BACK EXIT

ENTER

MARK

DELETE

CHAR/NUM

LIST

FLASHBK

L/R SELECT

Q.MENU

RATIO

INFO

USB,

SIMPLINK

Control buttons

• Controls MY MEDIA menu (Movie List,

Photo List, Music List)

• Controls the SIMPLINK compatible

devices.

FREEZE

(For Plasma TV)

Pause the present picture at the screen.

(It doesn’t work at USB Mode and

Simplink.)

The TV returns to normal viewing auto-

matically if no signal is received or no

operation is performed for 5 minutes.

If you keep the screen in Freeze condi-

tion, the residual image can exist.

SIMPLINK See a list of AV devices connected to

TV.

When you toggle this button, the

SIMPLINK menu appears at the screen.

►p.90

RATIO Changes the aspect ratio. ►p.128

WATCHING TV / CHANNEL CONTROL

The Magic Motion Remote Control communicates with your TV by using a 2.4 GHz bandwidth radio

frequency (RF).

󰋬

Output: 1 dBm or lower

󰋬

Maximum Communication Distance: 10 m (30 ft) in an open space

󰋬

Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)

󰋬

Transfer Rate: 250 kbps

󰋬

When the message "Magic motion

remote control battery is low. Change

the battery." is displayed, replace the

battery.

󰋬

Open the battery compartment

cover on the back side and install the

batteries matching correct polarity.

󰋬

Install two 1.5V AA batteries. Don’t

mix old or used batteries with new

ones.

󰋬

Close cover.

Installing Batteries

RF Specification of the Magic Motion Remote Control

ENTER

VOL

MUTE

MAGIC MOTION REMOTE CONTROL FUNCTIONS

Pointer Receiver Blinks the light when operating.

POWER Turns the TV on from standby or off to standby.

ENTER/HOME

Menu Button

Activates the pointer.

VOLUME UP/

DOWN Adjusts the volume.

CHANNEL

UP/DOWN Changes the channel.

MUTE Switches the sound on or off.

WATCHING TV / CHANNEL CONTROL

Magic Motion Remote Control Registration

How to use Magic Motion Remote Control

Precautions to Take when Using the Magic Motion Remote Control

The Magic Motion Remote Control operates by pairing with your TV.

ENTER

How to register the Magic Motion Remote Control

To register the Remote Control, press the ENTER button on the

Remote Control while aiming it at your TV.

MUTE

How to Re-register the Magic Motion Remote Control after

Registration Failure

Reset the remote control by pressing and holding both the

ENTER and MUTE buttons for 5 seconds. (Once the reset is

complete, the light on the Pointer RF Receiver blinks.) Then

repeat the above procedure to register the remote control.

ENTER

Press this button if there is no pointer on your TV screen. The pointer will then appear on the

screen.

If the pointer has not been used for a certain period of time, it will disappear.

ENTER CH

VOL

INPUT

You can move the pointer by aiming the Pointer Receiver of the remote

control at your TV then move it left, right, up or down.

If the pointer does not work properly after clicking the ENTER button, leave

the remote control for 10 seconds then use it again.

󰋬

Use the remote control within the maximum commu-

nication distance (10 m). Using the remote control

beyond this distance, or with an object obstructing it,

may cause a communication failure.

󰋬

A communication failure may occur due to nearby

devices. Electrical devices such as a microwave oven or

wireless LAN product may cause interference, as this

will use the same bandwidth (2.4 GHz) as the Magic

Motion Remote Control.

󰋬

The Magic Motion Remote Control may be damaged

or may malfunction if it is dropped or receives a heavy

impact.

󰋬

When playing a game using the Magic Motion Remote

Control, hold it securely by wrapping its strap around

your wrist and adjusting the length with the adjustable

ring.

󰋬

Take care not to bump into nearby furniture or other

people when using the Magic Motion Remote Control.

󰋬

Manufacturer and installer cannot provide service

related to human safety as the applicable wireless

device has possibility of electric wave interference.

WATCHING TV / CHANNEL CONTROL

Pointer Menu Options

ENTER

Select Home Menu.

ENTER

Select Pointer.

ENTER

Make appropriate adjustments.

ENTER

Select Exit.













Today



Today



Today



Today



Today



Today

  

  

  

  

  



󰌚

󰋬

Speed: Changed the pointer speed.

󰋬

Shape: Select the pointer shape.

󰋬

Size: Changes the pointer size.

󰋬

Alignment: When Alignment is On,

you can easily align the remote con-

trol's direction with the pointer on

your TV screen by shaking the remote

control left and right. Then, the point-

er automatically moves to the center

of the screen.

WATCHING TV / CHANNEL CONTROL

TURNING ON THE TV

CHANNEL SELECTION

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.

1First, connect power cord correctly.

At this moment, the TV switches to standby mode.

󰋬

In standby mode to turn TV on, press the / I, INPUT, CH (󰌝or 󰌞) button on the TV or press

the , INPUT, CH (󰌝or 󰌞), Number (0-9) button on the remote control.

2 Select the viewing source by using the INPUT button on the remote control.

3When finished using the TV, press the POWER button on the remote control. The TV reverts

to standby mode.

NOTE

► If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

► If you do not complete the Initial setting, it will appear whenever the TV is switched on until the

Initial setting procedure is completed.

1Press the CH (󰌝or 󰌞) or NUMBER buttons to select a channel number.

1 Press the VOL (+ or -) button to adjust the volume.

2If you want to switch the sound off, press the MUTE button.

3You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.

WATCHING TV / CHANNEL CONTROL

Step 1. Selecting Language

Step 2. Mode setting

INITIAL SETTING

This Function guides the user to easily set the essential items for viewing the TV for the first time

when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It

can also be activated from the user menus.

󰋬

Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best

picture in your home environment.

󰋬

“Store Demo” Mode is only intended for use in retail environments. Customers can adjust the

“Picture menu - Picture mode” manually while inspecting the TV, but the TV will automatically

return to preset in-store mode after 5 minutes.

󰋬

“Store Demo” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes

the TV to set the image quality.























ñol



󳉣󰩵󲊼



 

 

For LED LCD TV

ENTER

Select Menu Language.

ENTER

Select Home Use.

󰋚

󰋚󰌚

 

WATCHING TV / CHANNEL CONTROL

Step 4. Time Zone

Step 5. Auto Tuning











Step 3. Power Indicator (For LED LCD TV)



󰋬

This function is disable in “Step2. Mode

Setting - Store Demo”.

ENTER

Select On or Off.

ENTER

Select Time Zone option.

ENTER

Select Daylight Saving option.

ENTER

Check your antenna connec-

tion and start Auto Tuning.

  



󰋚󰌚

󰋚

󰌚

  

 Auto 



WATCHING TV / CHANNEL CONTROL







 



ON-SCREEN MENUS SELECTION

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

 󰋓󰋚

 



 󰌛 

 

   

   

   

   

 󰋓󰋚



 

 

 

 󰋓󰋚



 

  

  

  

  

  

  



 

  

  

  

  

  

 

 󰋓󰋚



 





 

 

 

 󰋓󰋚

 

 󰌖3

  

 

  



   

   

  

R

 󰋓󰋚







Display each menu.

ENTER

Select a menu item.

ENTER

Accept the current selection.

EXIT

Return to TV viewing.

NOTE

► ISM Method: For Plasma TV.

► Backlight, TruMotion, LED Local Dimming,

Power Indicator: For LED LCD TV.

󰋬

For further information, refer to the

optional “Wireless Media Box”

manual for operating instructions.

For USA

For Canada

WATCHING TV / CHANNEL CONTROL





Today



 󰋓 󰋚

     

     

󰋖 󰌚





 



 󰋓󰋚

 

 





    

    

 

󰍀



WATCHING TV / CHANNEL CONTROL

󰋚



QUICK MENU

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

Q.Menu (Quick Menu) is a menu of features which users might use frequently.

ENTER

Select Quick Menu.

ENTER

Select a menu item.

ENTER

Select Close.











󰌚

󰌒Aspect Ratio: Selects your desired picture format.

󰌘Picture Mode: Selects the desired preset picture setting.

󰌙 Sound Mode: Selects the desired preset sound setting.

󰌅Multi Audio: Changes the audio language (Digital signal).

󰌅SAP: Selects MTS sound (Analog signal).

󰋵Sleep Timer: Select the amount of time before your TV turns off automatically.

󰌄 Del/Add: Select channel you want to add or delete.

󰌕Caption: Select on or off.

󰋳USB Device: Select “Eject” in order to eject a USB device.

󰋬

Quick Menu can be selected either by

pressing the Q.MENU button on a

standard remote control, or by select-

ing on the Home Menu screen.

WATCHING TV / CHANNEL CONTROL

HOME MENU

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

ENTER

Select Home Menu.

ENTER

Select a menu item.

  



Today

SIMPLINK allows you to control and play other AV devices connected with HDMI

cable without additional cables and settings. This TV may work with devices with

HDMI-CEC support, but only devices with the logo are fully supported.



Today

Select the desired input source.



Today

Select NETCAST menu option and enjoy Online Service.



Today

Used for viewing photos, watching movies and listening to MP3s.



Today

Allows you to enjoy the games installed on the TV or set the schedule.



Today

Q.Menu (Quick Menu) is a menu of features which users might use frequently.

 You can easily and effectively access the TV information by viewing a simple manu-

al on the TV.

 Set up the Magic Motion Remote Control setting.

 Close the Home menu.













Today



Today



Today



Today



Today



Today

WATCHING TV / CHANNEL CONTROL

CUSTOMER SUPPORT

Software Update

󰋢











 









You can update the TV with the latest software to enhance the product operation and/or add new fea-

tures.

You can update the software by connecting the TV directly to the software update server.

The Software Update function may not work properly depending on your internet environment. In this

case, you can obtain the latest software from the authorized LG Electronics Service Center then update

your TV.

Select Customer Support.

ENTER

Select Software Update.

ENTER

Select Check Update Version to check

the newest version.

When selecting “Software Update-On”

- If the TV is connected to the internet

and it finds a software update on the

LG server, the update popup menu will

appear automatically.

- If the updated digital software informa-

tion is transmitted, the update popup

menu will appear automatically.

RED

󰋬

The software downloading time will

vary depending on the software size

and network conditions.

󰋬

During the software update proce-

dure, do not turn off the TV or dis-

connect AC power, or disconnect the

LAN cable.

󰋬

After software update, you can con-

firm the update software version at

software Update menu.

󰋬

When update is completed, the TV

will restart automatically in 5 sec-

onds.

󰋬

The TV functions may be improved

or changed by software update.

󰋬

The available time or functionality of

NetCast menu may be depends on

your ISP network conditions.

󰋬

When an update is completed, some

CHANNEL, PICTURE, and AUDIO

menu settings may need resetting.

󰋬

This TV cannot be updated to previ-

ous software version.

󰋬

Use the “Check Update Version” but-

ton to update the latest software on

the Network server manually.

󰋬

You cannot open NetCast while the

software is being updated.

WATCHING TV / CHANNEL CONTROL

Picture Test/Sound Test

This function is a customer support function that can execute picture and sound tests.





󰋢









Yes







Select Customer Support.

ENTER

Select Picture Test or Sound Test.

ENTER

Select Yes.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.



󰋢











Yes







RED

WATCHING TV / CHANNEL CONTROL

Product/Service Info.

This function shows support and product information.

Customer Service Center can differ by country.

Select Customer Support.

ENTER

Select Product/Service Info..

You can check the various

product/Service infomation

based on your model.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

RED

WATCHING TV / CHANNEL CONTROL

Network Test









󰋢



Check the newtwork status.

Select Customer Support.

ENTER

Select Network Test.

ENTER

Check the newtwork status.

RED





  



WATCHING TV / CHANNEL CONTROL

SIMPLE MANUAL

You can easily and effectively access the TV information by viewing a simple manual on the TV.

During the Simple Manual operation, audio will be muted.

ENTER

Select Home Menu.

ENTER

Select Simple Manual.

ENTER

Select the part of the manual you

would like to see.

ENTER

Select Exit.

󰋬

RED: Go to the Index page.

󰋬

BLUE: Play the Simple Manual auto-

matically or manually.

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory

on the channel list.

Run this function if you change your residence or move the TV.

Auto Tuning memorizes only the channels available at the time.

Select CHANNEL.

ENTER

Select Auto Tuning.

ENTER

Select Start.

ENTER

Run Auto tuning.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

The TV will ask for a password if

parental control has been activated

(LOCK Menu). Use the password you

set up in the LOCK Menu to allow a

channel search.

󰋬

The maximum number of channels

the TV can store is 1000.

󰋬

Found channels are grouped in the

order of DTV, TV, Cable DTV and

Cable TV.

 

󰋓󰋚 󰋓󰋚

󰋲

󰋚



























WATCHING TV / CHANNEL CONTROL

Add/Delete Channel (Manual Tuning)

When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal

strength monitor to see the quality of the signal being received.

Select CHANNEL.

ENTER

Select Manual Tuning.

ENTER

Select DTV, TV, Cable DTV,

or Cable TV.

4Select channel you want to

add or delete.

ENTER

Select Add or Delete.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

The TV will ask for a password if

parental control has been activated

(LOCK Menu). Use the password you

set up in the LOCK Menu to allow a

channel search.

󰋬

The maximum number of channels

the TV can store is 1000.

 

󰋓󰋚 󰋓󰋚

































󰋑

󰋚







WATCHING TV / CHANNEL CONTROL

Channel Editing

The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel

Edit List are displayed in blue.

When a channel number is deleted, it means that you will be unable to select it using CHbutton

during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the

NUMBER buttons or select it in the Channel Edit menu.

󰋬

Keep pressing the 󰌝button and use

the



buttons to move between

DTV, TV, Cable DTV and Cable TV.

Select CHANNEL.

ENTER

Select Channel Edit.

ENTER

Select a channel.

4Add or delete a channel.

Block or unblock the channel.

You can block/unblock channels even if

you select “Lock system-Off” in the LOCK

menu.

ENTER

Switch to the chosen channel number.

Move the pages when the channel list is

too long.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

BLUE

YELLOW

 󰋓󰋚

5-13-1 7-1

󰋚

   

󰋓 󰍈 󰋖 󰋖

󰍇

 

󰍮 󰌚

 A

󰋚

󰋱







WATCHING TV / CHANNEL CONTROL

CHANNEL LIST

ENTER

Select Channel List.

ENTER

Select a channel you want to switch.

BLUE Tune to the “CHANNEL menu -

Channel Edit”.

ENTER

Select Exit.

You can check which channels are stored in the memory by displaying the channel list.





DTV

󰋣󰋚



DTV



󰋖

This padlock is displayed

when the channel is locked

with parental control.











󰍇

󰌚

WATCHING TV / CHANNEL CONTROL

ENTER

Select Channel List.

ENTER

Select Favorite List.

ENTER

Select your desired favorite channel

group from A to D.

ENTER

Select your desired channel.

ENTER

Select Ch.Reg to register or cancel

the current channel in favorite chan-

nel list.

ENTER

Select Exit.

FAVORITE CHANNEL SETUP

Favorite Channels are a convenient feature that lets you quickly select channels of your choice without

waiting for the TV to select all the in-between channels.





DTV

󰋣󰋚



DTV



󰋖











󰍇

󰌚

󰍇

󰋬

You can also setup Favorite List in

the CHANNEL menu - Channel Edit.

󰋛󰋜



A



DTV

󰋚



DTV



󰋖 󰋖



󰌚

󰋖



WATCHING TV / CHANNEL CONTROL

Displaying Channel Information

CHANNEL INFORMATION

INFO

Show the current channel program Information on the screen.

2Show a previous or next channel’s program information

EXIT

Return to TV viewing.



󰋧 󰋑󰋚󰍀

󰋶󰋹󰌀󰌈󰋣

 







󰋲

󰋖

󰋖

WATCHING TV / CHANNEL CONTROL

CHANNEL BRIEF INFORMATION

Brief Info shows the present screen information.

ENTER

Shows the current channel’s brief info screen.

ENTER

Return to TV viewing.

Program title

Day, Month, Year,

Present time

Program start time

Program progress

bar

Program finish

time

Banner information



󰋶󰋹󰌀󰌈󰋣

 









󰋧

󰍐󰋼

6 3 11 4 5 2

󰋶Multilingual : The program contains two or more audio servic-

es. Use the Q.MENU menu to select wanted Audio.

󰌀Caption : The program contains one or more caption services.

Use the Q.MENU menu to select wanted Closed caption.

󰋹Dolby Digital: The program contains a Dolby Digital audio

signal in TV and HDMI input source.

󰌇The original aspect ratio of the video is 4:3

󰌈The original aspect ratio of the video is 16:9 (wide)

480i

480p

720p

1080i

1080p

The video resolution is 720x480i

The video resolution is 720x480p

The video resolution is 1280x720p

The video resolution is 1920x1080i

The video resolution is 1920x1080p

󰋣

V-Chip: The program contains V-Chip information. Refer to

the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex),

V (Violence), FV (Fantasy Violence)

WATCHING TV / CHANNEL CONTROL

󰋬

When new external device is connected, this popup

menu is displayed automatically.

If selecting Yes, you can select input source that you

want to appreciate.

󰋬

But, when selecting “SIMPLINK - On”, popup menu for

HDMI input will not be displayed.

INPUT LIST

Only these input signals which are connected to a TV can be activated and selected.



Yes







Disconnected inputs are inactive

(grayed out)

 󰋓 󰋚

     

     

󰋖 󰌚



Today



Today



Today



Today



Today



Today

ENTER

Select Home Menu.

ENTER

Select INPUT.

ENTER

Select the desired input source.

ENTER

Select Exit.

󰋬

TV: Select it to watch over-the-air,

cable and digital cable broadcasts.

󰋬

USB: Select it to use movie, photo, or

music files.

󰋬

AV: Select them to watch a VCR or

other external equipment.

󰋬

Component: Select them to watch

DVD or a Digital set-top box.

󰋬

RGB-PC: Select it to view PC input.

󰋬

HDMI: Select them to watch high

definition devices.

  











i.e)

WATCHING TV / CHANNEL CONTROL

INPUT LABEL

This indicates which device is connected to which input port.



  

  

  

  

  

󰋞



 󰋓 󰋚

     

     

󰋖 󰌚

ENTER

Select Home Menu.

ENTER

Select INPUT.

ENTER

Select Input Label.

ENTER

Select the desired input source and

then select   to choose the input

label.

ENTER

Select Exit.

󰋬

You can also select the Input label

using the BLUE button on the TV

remote control.





Today



Today



Today



Today



Today



Today

  











i.e)

WATCHING TV / CHANNEL CONTROL

RESET TO FACTORY DEFAULT (INITIAL SETTING)

This function resets the TV to factory default and erases all stored channels.

󰋬

When selecting “Lock System - On”

in the LOCK menu, the message to

enter the password appears.

󰋬

If you forget your password, press

“0-3-2-5” on the remote control.

 󰋓󰋚  󰋓󰋚



 





 

 

󰋑

󰋚



 





 

 

Select OPTION.

ENTER

Select Initial Setting.

ENTER

Select Yes.

ENTER

TV turns off automatically and starts

factory reset.



Yes







WATCHING TV / CHANNEL CONTROL

MODE SETTING

Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best

picture in your home environment.

󰋬

“Store Demo” Mode is only intended

for use in retail environments.

Customers can adjust the “Picture

menu - Picture mode” manually while

inspecting the TV, but the TV will

automatically return to preset in-

store mode after 5 minutes.

󰋬

“Store Demo” Mode is an optimal

setting for displaying at stores. “Store

Demo” mode initializes the TV to set

the image quality.

 󰋓󰋚  󰋓󰋚



 





 

 

Select OPTION.

ENTER

Select Mode Setting.

ENTER

Select Home Use.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋚

󰋱



 





 

 







 

 











For LED LCD TV

WATCHING TV / CHANNEL CONTROL

DEMO MODE

Displays a slide show to explain the various feature of this TV.

 󰋓󰋚  󰋓󰋚



 





 

 











 

 



Select OPTION.

ENTER

Select Mode Setting.

ENTER

Select Store Demo.

ENTER

Select On.

EXIT

Return to TV viewing.

After a while, Demo Mode. starts.

If you want to stop the demo, press any

button (Except VOL +, - and MUTE button).

󰋚

󰋱



 





 

 

󰋬

This feature is disabled in “Home Use”.

WATCHING TV / CHANNEL CONTROL

AV MODE

AV Mode toggles through preset Video and Audio settings.

󰋬

If you select “Cinema / 󰋸Cinema”

in AV mode, Cinema / 󰋸 Cinema

will be selected both for “PICTURE

menu - Picture Mode” and “AUDIO

menu - Sound Mode” respectively.

󰋬

If you select “Off” in AV mode, the

“Picture Mode” and “Sound Mode”

return to previous selected value.

󰋬

Off: Disables the AV MODE.

󰋬

Cinema / 󰋸 Cinema: Optimizes

video and audio for watching movies.

󰋬

Sport: Optimizes video and audio for

watching sports events.

󰋬

Game: Optimizes video and audio for

playing games.

󰋬

Press the AV MODE button repeat-

edly to select your desired menu

option.

ENTER

Select Screen Remote.

ENTER

Select AV MODE.

ENTER

Select AV MODE repeatedly to select

your desired menu option.









  

  

 



 

1 2 3

4 5 

  9













WATCHING TV / CHANNEL CONTROL

GAME/SCHEDULE

This function operates only if the current time has been set.



Today



Today



Today



Today



Today

ENTER

Select Home Menu.

ENTER

Select GAME/SCHEDULE.

ENTER

Select WORLD TIME.

ENTER

Select a desired city.

You can check the world time.

ENTER

Select Exit.



Today

  











    

    

 

󰍀



World Time

󰋓󰋚 󰋖 󰌚 󰍀















󰋬

The day light saving is not shown at

the world clock.

WATCHING TV / CHANNEL CONTROL

This function operates only if the current time has been set.

Schedule



Today



Today



Today



Today



Today



Today

  











    

    

 

󰍀



ENTER

Select Home Menu.

ENTER

Select GAME/SCHEDULE.

ENTER

Select Schedule.

ENTER

Select a desired date.

You can check the schedule.

Sun.

Jul. 4

Lunar May 23

Mon. Tue. Wed. Thu. Fri. Sat.

 󰋓󰋚

󰋖 󰋖   󰍀









WATCHING TV / CHANNEL CONTROL

ENTER

Select the desired menu option.

ENTER

The icon is displayed.

ENTER

Select List View to use schedule.

ENTER

Select Exit.

Sun.

Jul. 4

Lunar May 23

Mon. Tue. Wed. Thu. Fri. Sat.

 󰋓󰋚









Schedule Registration













  

  

  

Sun, Jul. 4 Lunar 5.23

Father Birthday

Repeat Solar/Lunar Notice D-day

  󰋖 󰌚









 1/2

repeat Solar The day Add a

D-Day

i.e)

WATCHING TV / CHANNEL CONTROL

Allows you to enjoy the games installed on the TV.



Today



Today



Today



Today



Today

ENTER

Select Home Menu.

ENTER

Select GAME/SCHEDULE.

ENTER

Enter the selected game mode.

ENTER

Select Exit.



Today

  











    

    

 

󰍀



Game

WATCHING TV / CHANNEL CONTROL

SIMPLINK

SIMPLINK allows you to control and play other AV devices connected with HDMI cable without addi-

tional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices

with the logo are fully supported.

SIMPLINK can be turned on and off in the user menus.

ENTER

Select Home Menu.

ENTER

Select SIMPLINK.

ENTER

Select On.

ENTER

Select the desired device.

ENTER

Control connected AV devices.

󰋚󰌚























 

󰌚













  



Today



Today



Today



Today



Today



Today

WATCHING TV / CHANNEL CONTROL

SIMPLINK Functions

󰋬

Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media

without additional settings.

󰋬

Select AV device: Enables you to select one of the AV devices connected to the TV.

󰋬

Disc playback: Control connected AV devices by pressing the 󰌝󰌞



, ENTER, 󰌧, 󰌨, 󰌩, 󰌫and 󰌪 but-

tons.

󰋬

Power off all devices: When you power off the TV, all connected devices are turned off.

󰋬

Switch audio-out: Offers an easy way to switch audio-out.

󰋬

Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play,

The TV will automatically turn on.

Note: To operate SIMPLINK, an High Speed HDMI cable with *CEC function should be used. (*CEC:

Consumer Electronics Control).

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does

not provide this function)

NOTE

► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of

the SIMPLINK device with the HDMI cable

► When you switch the Input source with the INPUT button on the remote control, the SIMPLINK

device will stop.

► When you select a device with home theater functionality, the sound output automatically switches

to the home theater speakers and the TV speakers are turned off.

► If a connected SIMPLINK home theater system doesn’t play the audio from the TV, connect the

DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the

back of the SIMPLINK device with an OPTICAL cable.

►

When no device is con-

nected (displayed in gray)

►

Selected Device

►

When a device is conect-

ed (displayed in bright

color)

󰋚󰌚























 

󰌚

TV viewing: Switch to the previous TV

channel regardless of the current

mode.

DISC playback: Select and play discs.

When multiple discs are available, the

disc devices are conveniently displayed

at the bottom of the screen.

VCR playback: Control the connected

VCR.

HDD Recordings playback: Control

recordings stored in HDD.

Audio Out to Home Theater speaker/

Audio Out to TV: Select Home Theater

speaker or TV speaker for Audio Out.

3D VIDEO

3D VIDEO (FOR LED LCD TV)

This TV can display 3D video when received from a compatible device. 3D video contains two pictures

for each video frame formatted for each eye. Therefore, special 3D glasses are required to view 3D

video.

3D VIDEO

Caution when viewing 3D Video

►When viewing 3D video, watch the TV within effective viewing angle and distance.

- If you exceed the viewing angle or distance, you may not be able to view the 3D video.

►If the receiving range is out of the speciﬁed range, the screen may not be viewable as 3D video. When

watching while lying down, the screen may not be visible.

►If you watch the 3D video too closely for a long period of time, it may hurt you eyesight.

►Watching TV or game screen with the 3D video glasses for a long period of time can cause drowsiness

or fatigue to your eyes. If you feel headache, fatigue or drowsiness, stop watching TV and take a rest.

►Pregnant woman, senior, person with heart problem or frequent drowsiness should refrain from watch-

ing 3D video.

►Some 3D video may cause you to duck or dodge the image in the video. Do not watch 3D video near

fragile objects or any objects that can be knocked over easily.

► Please prevent children under the age of 5 from watching 3D video. It may affect their vision devel-

opment.

►Warning for photosensitization seizure

Speciﬁc image from the video game and light or speciﬁc pattern from the video can cause a seizure to

some individuals. If you or anybody from your family has a history of epilepsy or seizure, please consult

your doctor before watching 3D video.

Also the following symptoms can occur in unspeciﬁed conditions without any previous history.

- If you experience dizziness, visual transition, visual or facial instability, unconscious action, convulsion,

loss of conscience, confusion, loss of directional sense or nausea during or after watching the 3D video,

immediately stop watching the 3D video and consult the doctor.

Risk of photosensitization seizure can be reduced with the following actions.

- Take 5-15 minutes of break for every 1 hour watched.

- For anyone that has a difference in the vision between the eyes, watch after taking vision correction

measures.

- Watch at eye level with the 3D screen, directly in front of the screen.

- When you feel fatigued, dizzy or have a headache, stop watching and take a break.

- Do not watch the 3D video when sleepy, tired or sick, and avoid watching the 3D video for a long

period of time.

►On initial power on after turning the power on, the may need a few seconds to calibrate with the TV.

► It may take some time to see standard stereoscopic if you look at other places and stereoscopic again

while watching stereoscopic.

► It may ﬂicker slightly on TV while watching stereoscopic under 3 wavelength lamp ﬂuorescent light(50

Hz~60 Hz) or around windows. If so, it is recommended to block the sun light with a curtain and to

turn lights low.

►When watching with other company’s 3D glasses, the 3D video may not work normally.

►If there is an obstacle between the emitter and the 3D glasses, 3D vision cannot be viewed normally.

►Use TV as far as possible from other electronic equipments and IR equipments.

3D VIDEO

60 ◦

7 m

2 m 2 m

Caution when using 3D Glasses

3D Video viewing range

►3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions.

►Do not use the 3D glasses to replace the corrective glasses, sunglasses or protective goggles.

►Do not store the 3D glasses in hot or cold location.

►Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.

►Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.

As the product may be scratched if there is any foreign material on the cloth, shake off any dust

before using it.

Viewing

Distance

2 m - 7 m

(6.5 ft - 22.9 ft)

Viewing

Angle

120º (When the viewing distance is 2 m (6.5 ft))

TV size, viewing angle & other circumstances may change the viewing distance and the angle of view.

3D VIDEO

1Play the title produced in 3D video.

Refer to the following for 3D video input format supported.

To turn on 3D Mode, select this icon.

Top & Bottom

󰋒󰋚 󰍀

Side by Side Checker Board Frame Sequential

ENTER

After selecting the shape as shown in the screen on TV,

wear the 3D glasses.

WATCHING 3D VIDEO

Signal Resolution Horizontal

Frequency (kHz)

Vertical

Frequency (Hz) Playable 3D video format

HDMI

Input

720p 1280x720 45.00

Top & Bottom, Side by Side

HDMI (V. 1.4 with HDMI 3D)

Frame Packing

1080i

1920X1080

33.75 Top & Bottom, Side by Side

1080p

67.50

Top & Bottom, Side by Side,

Checker Board

Single Frame Sequential

27.00 24

Top & Bottom, Side by Side,

Checker Board

HDMI (V. 1.4 with HDMI 3D)

Frame Packing

33.75 30 Top & Bottom, Side by Side

Checker Board

USB

Input 1080p 1920X1080 33.75 30 Top & Bottom, Side by Side

Checker Board

Media contents and a player need to support HDMI (V. 1.4 with HDMI 3D) Frame Packing to play Frame Pack-

ing format stereoscopic.

Video, which is input as HDMI (V. 1.4 with HDMI 3D) Frame Packing format, is switched into the stereoscopic

screen automatically.

3D VIDEO

ENTER

L/R SELECT

Select Setting Left/Right.

ENTER

Select Left/Right or Right/Left.

Select the screen with 3D video with better visibility.

Return to TV viewing.

NOTE

►

If you select 3D mode, "Power indicator" is turned off automatically.

►

Specific menus may not work while watching the 3D video.

► You can only chooseStandard  Cinema  Gamewith the AV MODE button on remote control.

AV Mode is set as Standard while playing 3D video.

► Energy Saving is disabled while playing 3D video.

►

3D video does not work during external input lock, external input transition, editing Input Label,

MY MEDIA menu and SIMPLINK.

󰋖



󰋚











󰋖

󰋖

󰋢





󰍀



MY MEDIA

ENTRY MODE

The My Media menu will open automatically when you insert a USB drive. My Media can also be

accessed by choosing My Media in the user menu.

After choosing the desired type of media, choose a device to open files from. The options are: USB

device, or DLNA.

When removing the USB device

Select the USB Device menu before

removing the USB device.

󰋬

This TV can view JPG image files, HD DivX

files and play MP3 audio files.





 







󰋚

󰋖 󰌚

ENTER

Select Home Menu.

ENTER

Select MY MEDIA.

ENTER

Select Movie List, Photo List or

Music List.

ENTER

Select the desired device. 1

ENTER

Select Quick Menu.

ENTER

Select USB device.

ENTER

Select Eject.

Search other network device.

BLUE

MY MEDIA

  













Today



Today



Today



Today



Today



Today

MY MEDIA

CONNECTION METHOD

USB Connection

Connect the USB device to the USB IN jack on the side of TV.

Precautions when using the USB device

►Only a USB storage device is recognizable.

►Connecting a USB storage device through a USB hub is not supported.

►A USB storage device which uses its own driver may not be recognized.

►The recognition speed of a USB storage device may depend on each device.

►Please do not turn off the TV or unplug the USB device when the connected USB storage device

is working. When such device is suddenly separated or unplugged, the stored files or the USB

storage device may be damaged.

►Only use a USB storage device which has normal music files, image files, or movie files.

►Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system pro-

vided with the Windows operating system. Others may not be recognized.

►Some USB storage devices require a power adapter. The power adapter must be connected in

order to be seen by the TV.

►If a device is not recognized by the TV, try a different cable. Excessively long cables are not sup-

ported.

►Some USB storage devices may not be supported or operate properly.

►Please backup important files because data on USB device could be damaged. Data management

is consumer's responsibility and as a result, the manufacturer does not cover data damage.

►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can

use up to 4 partitions or USB memory devices.

►File alignment method of USB storage device is similar to Window XP and file names can be up

to 100 English characters.

►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB

memory.

►If a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off and

on again to make it work properly. Refer to the user manual of the USB external hard disk.

►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the

movie list.

►Maximum of 999 folders or files can be recognized under one folder.

►If there are too many folders and files in one folder, it may not operate properly.

IN 4

AV IN 2

VIDEO

AUDIO

L(MONO)

H/P

USB IN 1 USB IN 2

Memory Key

MY MEDIA

DLNA

About DLNA

This TV is a DLNA Certified digital media product.

It can display and play movie, photo and music content from your DLNA server.

The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics,

computing industry and mobile device companies. Digital Living provides consumers with easy sharing

of digital media through a wired or wireless network in the home.

The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability

Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA

server software or other DLNA compatible device is connected to this TV, some setting changes of

software or other devices may be required. Please refer to the operating instructions for the software or

device for more information.

NOTE

►The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for

sharing files and folders to this TV.

►The supplied Nero MediaHome 4 Essentials software does not support following functions:

Transcoding, Remote UI, TV control, Internet services and Apple iTunes

►This manual explains operations with the English version of Nero MediaHome 4 Essentials as

examples. Follow the explanation referring to the actual operations of your language version.

►

If there are too many folders and files in one folder, it may not operate properly.

►

For the DLNA option, use the Nero MediaHome programme that is provided with the TV. However, we

cannot guarantee that third party program will work perfectly.

►

You can select a channel while viewing the small preview channel list on your TV screen.

►Check your network settings when the DLNA option does not work properly.

►If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may

not work properly. In this case, exit Nero Media Home and restart the programme. You can down-

load the latest version of Nero Media Home by clicking the question mark at the bottom-left of

the program.

►When the network is unstable, the device may be slower or may need to load during playback.

►When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported.

►When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from the

original.

►When more than one TV is connected to a single server in DLNA mode, a file may not play properly,

depending on the server performance.

►If the play time information is not provided by the server, it is displayed as "--:--:--."

►When using Movie List, DRM/*.tp/*.trp files in the DLNA server cannot be played.

►DLNA operation may not work properly according to the AP manufacturers.

MY MEDIA

Installing Nero MediaHome 4 Essentials

Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows.

Requirement PC system before you install Nero MediaHome 4 Essentials

󰋬

Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® XP

Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003

󰋬

Windows Vista® 64-bit edition (application runs in 32-bit mode)

󰋬

Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome stand-

alone

󰋬

1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors

󰋬

Memory: 256 MB RAM

󰋬

Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and

16-bit color settings

󰋬

Windows® Internet Explorer® 6.0 or higher

󰋬

DirectX® 9.0c revision 30 (August 2006) or higher

󰋬

Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)

1Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your compu-

ter’s CD-ROM drive.

An installation wizard will walk you through the quick and uncomplicated installation process.

2Close all Microsoft Windows programs and exit any anti-virus software that may be running.

3Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.

4Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard appears.

5Click the Next button to display the serial number input screen.

Click Next to go to the next step.

6If you accept all conditions, click I accept the License Conditions check box and click Next.

Installation is not possible without this agreement.

7Click Typical and click Next. The installation process is started.

8If you want to take part in the anonymous collection of data, select the check box and click the

Next button.

9Click the Exit button to complete the installation.

MY MEDIA

100

Sharing files and folders

After installing Nero MediaHome, you must add folders you wish to share.

1Double-click the Nero MediaHome 4 Essentials icon on the desktop.

2Click Network icon on the left and define your network name in the Network name field. The

Network name you enter will be recognized by your TV.

3Click Shares icon on the left.

4Click Local Folders tab on the Shared screen.

5Click Add icon to open the Browse Folder window.

6Select the folder containing the files you want to share. The selected folder is added to the list of

shared folders.

7Click Start Server icon to start the server.

NOTE

►If the shared folders or files are not displayed on the TV, click the folder on the Local Folders

tab and click Rescan Folder at the More button.

►Visit www.nero.com for more information and software tools.

101

MY MEDIA

Playing back shared contents

You can display and play movie, photo and music content stored on your computer or other DLNA

media servers.

1Start the server on your computer or other device that connected on your home network.

NOTE

►To play the file on the media server, the TV and the media server must be connected to the

same access point.

►Because the compatibility and available playback functions on the MY MEDIA menu are tested

on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and

playback functions on the MY MEDIA may differ depending on media servers.

►The file requirements on this page are not always compatible. There may have some restrictions

by file features and media server’s ability.

►Even the files that are not supported can be displayed in photo thumbnail or music thumbnail.

►Movie thumbnail is not supported in DLNA Movie.

►If there is an unplayable music file in the MY MEDIA menu, the TV will skip the file and play next

file.

►The file information indicated on the screen may not always correct for music and movie files in

MY MEDIA menu

►This TV only supports movie subtitle files supplied by Nero MediaHome 4.

►The subtitle file name and movie file name have to be the same and located at the same folder.

►If subtitle files have been added after a directory has been indexed already, the user has to

remove and re-add the folder to the list of shares.

►The playback and operating quality of the MY MEDIA function may be affected by your home

network condition.

►The files from removable media such as USB drive, DVD-drive etc. on your media server may

not share properly.

►When playing the Media through DLNA connection, it does not support the DivX file play which

is protected by DRM.

►Up to 200 folders in one folder and 999 including folders and files can be recognized.

►If there are too many folders and files in one folder, it may not operate properly.

Select MY MEDIA.

ENTER

Select Movie List, Photo List or Music List.

ENTER

Select the DLNA.

Depending on the media server, this TV may need to get the permission from

the server.

If you want to re-scan available media server, press blue color button.

MY MEDIA

102

MOVIE LIST

It displays all of the video files it recognizes.

The On-Screen Display on your model may be slightly different.

Precautions when playing the video files

►Some user-created subtitles may not work properly.

►Some special characters are not supported in subtitles.

►HTML tags are not supported in subtitles.

►Time information in an external subtitle file should be arranged in ascending order to be played.

►Changing font and color in subtitles is not supported.

►Subtitles in languages other than one specified are not supported.

►Video files with subtitle files of 1 MB or larger may not be played properly.

►The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the

audio language is changed.

►A damaged video file may not be played correctly, or some functions may not be usable.

►Video files produced with some encoders may not be played correctly.

►If the video and audio structure of recorded file is not interleaved, the file not playback properly.

►Video with resolution higher than maximum resolution supported for each frame, cannot be guar-

anteed for smooth playback.

►Video files other than the specified types and formats may not work properly.

►The movie file encoded by the GMC (Global Motion Compensation) and Qpel (Quarterpel Motion

Estimation) is not supported.

►Only 10000 sync blocks are supported within the subtitle file.

►We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.

►DTS Audio codec is not supported.

►A video file more than 30GB in file size is not supported for playback.

►Playing a video via a USB connection that doesn’t support high speed may not work properly.

►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the

movie list.

►The video file and its subtitle file must be located in the same folder.

At this time, a video file name and its subtitle file name must be identical for it to be displayed.

►When you are watching a movie via the Movie List function, you can adjust the picture with the

ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode

is not supported.

►Trick Mode does not support other functions than 󰌪if video files do not have index information.

►When playing video file using network, the Trick mode is limited to 2-times speed.

►Video file names that contain special characters may not be playable.

Supported movie file

󰋬

Resolution: under 1920 pixel (width) x 1080 pixel (height)

󰋬

Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720)

󰋬

Max bitrate of playable video file: 20 Mbps (Mega bit per second)

󰋬

Bit rate of audio format: within 32 kbps to 320 kbps (MP3)

󰋬

Supported external subtitle format: *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.

txt(TMPlayer)/*.psb(PowerDivX)

󰋬

Supported Internal subtitle format: only XSUB (It is the subtitle format used in DivX6 files)

103

MY MEDIA

Supported Video Formats

File

Extensions

Audio/

Video Codec Profile/Level Support Explanation

.asf

.wmv

Video

VC-1 Advanced Profile Advanced Profile@Level 3

(e.g. 720p60, 1080i60, 1080p30) Only streams compliant

to SMPTE 421M VC-1

standard are supported.

VC-1 Simple and Main Profiles Simple Profile@Medium Level (e.g. CIF, QVGA)

Main Profile@High Level (e.g. 1080p30)

Audio WMA Standard

WMA 9 Professional

.divx

.avi

Video

DivX3.11

Global motion compen-

sation or quarterpel

motion estimation does

not supported. Streams

using this syntax are not

supported.

DivX4

DivX5

DivX6

Advanced Simple Profile

(e.g. 720p/1080i)

XViD

H.264 / AVC

Main Profile@ Level 4.1

High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30)

Audio

MPEG-1 Layer I, II

MPEG-1 Layer III (MP3)

Dolby Digital

.mp4

.m4v

Video H.264 / AVC

Main Profile@ Level 4.1

High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30)

Global motion compen-

sation or quarterpel

motion estimation does

not supported. Streams

using this syntax are not

supported.

MPEG-4 Part 2 Advanced Simple Profile (e.g. 720p/1080i)

Audio AAC AAC-LC and HE-AAC

.mkv

Video H.264 / AVC

Main Profile@ Level 4.1

High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30)

Most of the MKV con-

tent available is encod-

ed by the open source

x264 codec.

Audio AAC AAC-LC and HE-AAC

Dolby Digital

.ts

.trp

.tp

Video

H.264 / AVC

Main Profile@ Level 4.1

High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30)

MPEG-2 Main Profile@High Level(e.g. 720p60, 1080i60)

VC-1

Simple Profile@Medium Level

(e.g. CIF, QVGA)

Main Profile@High Level

(e.g. 1080p30)

Advanced Profile@Level3

(e.g. 720p60, 1080i60, 1080p30)

Only streams compliant

to SMPTE 421M VC-1

standard are supported.

Audio

MPEG-1 Layer I, II

MPEG-1 Layer III (MP3)

Dolby Digital

AAC AAC-LC and HE-AAC

.vob

Video MPEG-1

MPEG-2 Main Profile@High Level (e.g. 720p60, 1080i60)

Audio

Dolby Digital

MPEG-1 Layer I, II

DVD-LPCM

.mpg Video MPEG-1 Main Profile@High Level (e.g. 720p60, 1080i60) Only streams compliant

configured properly for

TS, PS or ES

Audio MPEG-1 Layer I, II

MY MEDIA

104

Moves to upper level folder

Current page/Total pages

Current page/ total pages of

contents

Contents under the folder

focused on 1

Change to a different input.

Move to Photo List or Music

List.

Changes the number or

thumbnails displayed at a time.

Allows you to mark certain files.

Return to TV viewing.

Screen Components







󰋚󰍈



   





Abnormal files are

displayed using this

graphic.

Non-supported files

are displayed using

this graphic.

ENTER

Select Home Menu.

ENTER

Select MY MEDIA.

ENTER

Select Movie List.

󰋖 󰋖 󰋖 󰋖 󰍀

5 6 7 8 9

105

MY MEDIA

󰋬

When one or more movie files are

marked, the marked movies will be

played in sequence.

ENTER

Select the target folder

or drive.

ENTER

Select Mark Mode.

ENTER

Select the desired

movie title.

ENTER

Select Play Marked.

Play the marked movie

file.

It displays the current

movie status progress

bar on the bottom of

the screen.

Movie Selection

Mark Mode

Play

Marked

Play the first selected file. Once a movie

finishes playing, the next selected one will

be played automatically.

Mark All Mark all files in the folder.

Unmark

All Deselect all marked files.

Exit Mark

Mode Enter or exit the Mark Mode.







󰋚󰍈



   













󰋚󰍈



   





ENTER

Select the target folder

or drive.

ENTER

Select the desired

movie title.

ENTER

Play the movie file.



󰋖 󰋖 󰋖 󰋖 󰍀

MY MEDIA

106

Playing the Movie

NOTE

►

When replaying a video file after stop-

ping, you can play from where it stopped

automatically.

►

If you select “Yes” when playing the

same file after the video file has been

stopped, it will restart where it stopped

previously.

►

If continuous series files exist within the

folder, the next file will automatically be

played.

But, this excludes cases when

the Repeat function of Movie List Option

is turned “On” (Refer to page 107) or

when set as Marked Play.

󰌧

󰋛󰋜

󰌨 󰌧 󰌩 󰌫 󰌪 󰌛 󰍮 󰌚 󰍀

ENTER

Show the Option menu.

ENTER

Select the desired menu option.









1 2 3 4

󰌨Stop playback.

󰌧Return to normal playback.

󰌩Paused playback. If no buttons

are pressed on the remote control

for 10 minutes after pausing, the

TV returns to the playback state.

󰌫󰌪Select the required speed:

x2, x4, x8, x16, x32 (backward/for-

ward).

Increase or decrease the bright-

ness of your screen.

Hide the menu on screen. To see

the menu again, press ENTER

button.

Return to the previous menu.

󰌚 

107

MY MEDIA

Subtitle Language Group Supported Language

Latin1 English, Spanish, French

Korean English, Korean

Set Video Play Menu Options



  

 

  

  

  

 

 

  

  

Code Page

󰋬

Picture Size: Selects your desired

picture format for videos.

Full Mode: Files are played in full

screen mode regardless of the aspect

ratio of video.

Original Mode: Files are played

according to the aspect ratio of

video.

󰋬

Audio Language: Changes the

Language Group of the audio for

video files. Files with a single audio

track cannot be selected.

󰋬

Subtitle Language: The subtitles can

be turned on or off.

󰋬

Language: Activated for SMI subtitles

and can select the language within

the subtitle.

󰋬

Code Page: Subtitle font selection.

When set to default, contents are

displayed in the language set in

"Option - Language - Menu

Language."

󰋬

Sync: When the video is not synchro-

nized with the captions, it can be

adjusted by 0.5 second.

󰋬

Position: Move the location of the

subtitles.

󰋬

Size: Changes the subtitle font size.

󰋬

Repeat: Turn on/off repeat function

of movie playback. When turned on,

the file within the folder will be played

back repeatedly. When turned off, if

the next file name is similar to the

previous file, it can be played sequen-

tially.

ENTER

Select the desired menu option.

ENTER

Make appropriate adjustments.



󰌚 

MY MEDIA

108

* Image shown may differ from your TV.

Set Video Menu Options

Set Audio Menu Options



  

  

  

  

  

  

  







  

  

  

  

 

For LED LCD TV



  

  

  

  

  

  

  

  

For Plasma TV

G

W C

ENTER

Make appropriate adjustments.

Then, select Close.

ENTER

Make appropriate adjustments.

Then, select Close.





󰌚 

109

MY MEDIA

The On-Screen Display on your model may be slightly different.

PHOTO LIST

Screen Components

Moves to upper level folder

Current page/Total pages

Current page/total pages of

contents

Contents under the folder

focused on 1

Change to a different input.

Move to Music List or Movie

List.

Changes the number or

thumbnails displayed at a time.

Allows you to mark certain files.

Return to TV viewing.

Supported photo file: *.JPG

󰋬

Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height)

󰋬

Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height)

󰋬

You can play JPEG files only.

󰋬

Non-supported files are displayed in the form of predefined icon.

󰋬

An error message occurs for corrupted files or file formats that cannot be played.

󰋬

Corrupted image files may not be displayed properly.

󰋬

It may take some time to view high-resolution images in full screen.

ENTER

Select Home Menu.

ENTER

Select MY MEDIA.

ENTER

Select Photo List.









       P8 P9



󰋚󰍈

󰋖 󰋖 󰋖 󰋖 󰍀

Abnormal files are

displayed using this

graphic.

Non-supported files

are displayed using

this graphic.

5 6 7 8 9

File

Extensions Item Profile

jpeg

jpg

jpe

supproted file format

SOF0: baseline

SOF1: Extend Sequential

SOF2: Progressive

photo size

Min: 64 x 64

Max - Normal Type: 15360 (W) x 8640 (H)

Progressive Type: 1920 (W) x 1440 (H)

3D mpo

supproted file format mpo

photo size

4:3 size: 3648 x 2736

2592 x 1944

2048 x 1536

3:2 size: 3648 x 2432

For 47/55LX9500

MY MEDIA

110

Photo Selection

󰋬

When one or more photos are

marked, you can view individual pho-

tos or a slide show of the marked

photos. If no photos are marked, you

can view all photos individually or all

photos in the folder in a slide show.

Mark Mode











󰋚󰍈











󰋚󰍈



󰋖 󰋖 󰋖 󰋖 󰍀

ENTER

Select the target folder

or drive.

ENTER

Select Mark Mode.

ENTER

Select the desired

photo files.

ENTER

Select View Marked.

View the marked photo

files.

View

Marked Display the selected photo.

Mark All Mark all photos on the screen.

Unmark

All Deselect all marked photos.

Exit Mark

Mode Enter or exit the Mark Mode.

ENTER

Select the target folder

or drive.

ENTER

Select the desired pho-

tos.

ENTER

Photo file is displayed.

111

MY MEDIA

Full Screen Menu

More operations are available in full screen mode.

The aspect ratio of a photo may change the size

of the photo displayed on the screen in full size.

1Select the target folder or drive.

ENTER

Select the desired photos.

ENTER

The selected photo is displayed in full

size.











󰋚󰍈

 









󰍦 󰍦 󰍩 󰍃󰌛 󰍮 󰌚 󰍀

 



MY MEDIA

112

 









 

► Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos

in the current folder are displayed during slide show.

󰋬

Set the time interval of the slide show in Option-Set Photo View. menu (Refer to p. 113).

󰋬

You can adjust Option by using the Q.MENU button on the remote control.

►

BGM (Background Music): Listen to music while viewing photos in full size.

󰋬

Set the BGM device and album in Option-Set Photo View. menu (Refer to p. 113).

󰋬

You can adjust Option by using the Q.MENU button on the remote control.

►

󰍩(Rotate): Rotate photos.

󰋬

Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise.

󰋬

Photos cannot be rotated if its width is greater than the available supported resolution height.

►

󰍃 /󰍄: View the photo in full mode or original mode.

►

󰌛(Energy Saving): Increase the brightness of your screen by using ENERGY SAVING button.

►

Option: Set values for Slide Speed and BGM (Refer to p.113).

󰋬

You cannot change BGM while BGM is playing.

󰋬

You can only select the MP3 folder saved on the device that currently displays the photo.

► Hide: Hide the menu on the full-sized screen.

󰋬

To see the menu again on the full-sized screen, press ENTER button to display.

► Exit: Move to the previous menu screen.

ENTER

Select the Slideshow,

BGM, 󰍩(Rotate), 󰍃 /󰍄, 󰌛

(Energy Saving), Option, or Hide.

󰍦 󰍦 󰍩 󰍃󰌛 󰍮 󰌚 󰍀

113

MY MEDIA

Using the Photo List Function

Set Photo View Menu Options



  

 

  

  

 









󰍦 󰍦 󰍩 󰍃󰌛󰍮 󰌚 󰍀

 

ENTER

Show the Option menu.

ENTER

Select the desired menu option.

ENTER

Select Slide Speed or BGM.

ENTER

Make appropriate adjustments.











󰌚 

MY MEDIA

114

* Image shown may differ from your TV.

Set Video Menu Options

Set Audio Menu Options



  

  

  

  

  

  

  







  

  

  

  

 

For LED LCD TV



  

  

  

  

  

  

  

  

For Plasma TV

G

W C

ENTER

Make appropriate adjustments. Then, select Close.

ENTER

Make appropriate adjustments.

Then, select Close.





󰌚 

115

MY MEDIA

MUSIC LIST

This TV cannot play back copy-protected files.

The On-Screen Display on your model may be slightly different.

Supported Music File: *.MP3

Bit rate range: 32 Kbps - 320 Kbps

• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz

• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz

Screen Components

Preview: If any album jacket for

the file (Album Art Image)

exists, this picture is displayed.

Moves to upper level folder

Current page/Total pages

Current page/total pages of

contents

Contents under the folder

focused on 2

Change to a different input.

Move to Movie List or Photo

List.

Changes the number or

thumbnails displayed at a time.

Allows you to mark certain files.

Return to TV viewing.

Abnormal files are

displayed using this

graphic.

Non-supported files

are displayed using

this graphic.

ENTER

Select Home Menu.

ENTER

Select MY MEDIA.

ENTER

Select Music List. 





























󰋚󰍈

󰋖 󰋖 󰋖 󰋖 󰍀

6 7 8 9 10

MY MEDIA

116

Music Selection

Mark Mode































󰋚󰍈































󰋚󰍈



Play

Marked

Play the selected songs. Once a song

finishes playing, the next selected one

will be played automatically.

Mark All Mark all songs in the folder.

Unmark

All Deselect all marked song.

Exit Mark

Mode Enter or exit the Mark Mode.

󰋖 󰋖 󰋖 󰋖 󰍀

ENTER

Select the target folder

or drive.

ENTER

Select Mark Mode.

ENTER

Select the desired

music file.

ENTER

Select Play Marked.

Play the marked music

file.

ENTER

Select the target folder

or drive.

ENTER

Select the desired

music file.

ENTER

Music files are played.

117

MY MEDIA

Using the Music List Function

NOTE

►

You can listen to the music only within

the device currently played.

ENTER

Show the Option menu.

ENTER

Select Set Audio Play. or Set Audio..







󰌧 󰋛󰋜

󰌨 󰌧 󰌩 󰌫 󰌪 󰋖 󰌛 󰍮 󰌚 󰍀























󰋢

󰌧

󰋢󰋢



1 2 3 4 5







󰌚 

󰌨Stop playback.

󰌧Return to normal playback.

󰌩Paused playback.

󰌫󰌪Select the previous or next

song.

Play with Photo: Start playing the

selected songs and then move to

the Photo List.

Increase or decrease the bright-

ness of your screen

Hide the menu on screen.

Move to the previous menu

screen.

MY MEDIA

118



  

  

Set Audio Play Menu Options

Set Audio Menu Options



  

  

  

  

 



ENTER

Make appropriate adjustments.

Then, select Close.

ENTER

Make appropriate adjustments.

Then, select Close.

󰌚 

119

MY MEDIA

NOTE

►

A damaged or corrupted music does not play but displays 00:00 in playtime.

►

Music files with copy-protection will not play.

►

Press ENTER or 󰌨 button to stop the screen saver.

󰋬

If you don't press any buttons for a while, the play information box

will float across the screen. This prevents screen pixel damage due

to a fixed image remaining on the screen for a extended period of

time.



󰌧

MY MEDIA

120

DIVX REGISTRATION CODE

Using the registration number, movies can be rented or purchased at www.divx.com/vod.

Only DivX files matched with the registration code of the purchased TV are playable.

Select MY MEDIA.

ENTER

Select DivX Option.

3Select DivX Reg. Code.

ENTER

Display Divx Reg. Code.

















󰌚





 

BLUE

NOTE

►

When loading, some buttons may not work.

►

If you use the DivX registration code of another device, the rented or purchased DivX file cannot

be played. Therefore always use the DivX registration code assigned to this product.

►

The video or audio of a file converted based on a standard other than the DivX codec standard

may be corrupted or unable to be played.

►

The DRM/*.tp/*.trp file in DLNA server is not played when Movie List is in operation.

121

MY MEDIA

DEACTIVATION

The purpose of deactivation is to allow deactivation of devices for users who have activated all the

available devices through the web server and are blocked from activating more devices. DivX VOD

allows the consumer to activate up to 6 devices under one account.

Delete the existing authentication information to receive a new DivX user authentication for TV. Once

this function is executed, a DivX user authentication is required again to see DivX DRM files.

Select MY MEDIA.

ENTER

Select DivX Option.

3Select Deactivation.

ENTER

Select Yes.

ENTER

Display Deactivation.





󰌚

 



********







BLUE





 

NETWORK

122

LEGAL NOTICE

NETWORK

Select NETWORK.

ENTER

Select Legal Notice.

ENTER

Check Legal notice.

EXIT

Return to TV viewing.

NETWORK ꔂ Move ꔉ Enter

• Network Setting : Wired

• Network Status : Internet is connected

• Legal Notice

• ESN

ꔀ

ꔉ

Legal Notice

ꔍ

IMPORTANT NOTICE RELATING TO NETWORK SERVICE All content and services

accessible through this device belong to third parties and are protected by copyright, patent,

trademark and/or other intellectual property laws. Such content and services are provided

solely for your personal noncommercial use. You may not use any content or services in a

manner that has not been authorized by the content owner or service provider. Without

limiting the foregoing, unless expressly authorized by the applicable content owner or service

provider, you may not copy, upload, post, transmit, translate, sell, modify, create

derivative works, or distribute in any manner o r medium any content or services displayed

through this device.YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND

ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL

WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER

EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF

MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE

page 1/3

IMPORTANT NOTICE RELATING TO NETWORK SERVICE

All content and services accessible through this device belong

to third parties and are protected by copyright, patent, trademark

and/or other intellectual property laws. Such content and ser-

vices are provided solely for your personal noncommercial use.

You may not use any content or services in a manner that has

not been authorized by the content owner or service provider.

Without limiting the foregoing, unless expressly authorized by

the applicable content owner or service provider, you may not

copy, upload, post, transmit, translate, sell, modify, create deriva-

tive works, or distribute in any manner or medium any content

or services displayed through this device.

YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE

DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES

ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY

DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH

RESPECT TO ANY CONTENT AND SERVICES, EITHER

EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY

QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY RIGHTS. LG DOES

NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS,

LEGALITY, OR COMPLETENESS OF ANY CONTENT OR

SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND

DOES NOT WARRANT THAT THE DEVICE OR SERVICES WILL

MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE

DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-

FREE. UNDER NO CIRCUMSTANCES, INCLUDING

NEGLIGENCE, SHALL LG BE LIABLE, WHETHER IN CONTRACT

OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL

OR CONSEQUENTIAL DAMAGES, OR ANY OTHER DAMAGES

ARISING OUT OF, ANY INFORMATION CONTAINED IN, OR

ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY

THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Third party services may be changed, suspended, removed,

terminated or interrupted, or access may be disabled at any

time, without notice, and LG makes no representation or war-

ranty that any content or service will remain available for any

period of time. Content and services are transmitted by third

parties by means of networks and transmission facilities over

which LG has no control. LG may impose limits on the use of or

access to certain services or content, in any case and without

notice or liability. LG expressly disclaims any responsibility or

liability for any change, interruption, disabling, removal of or

suspension of any content or service made available through

this device.

LG is neither responsible nor liable for customer service related

to the content and services. Any question or request for service

relating to the content or services should be made directly to the

respective content and service providers.

123

NETCAST

NETCAST MENU

These services are provided by separate Content Provider.

NETCAST menu source can differ by country.

What is a NETCAST?

Stream movies, TV shows and video, or get up to the minute news, stock information or weather updates

directly to your TV.

ꔛ

To view the owner’s manual that provided by

the Content Provider, visit our website at

http://www.lg.com.

ꔛ

To see the activation method of Yahoo!,

Netflix, or Vudu, click the Yahoo!, Netflix,

Vudu in the CD manual (For USA).

ꔛ

You can also select the NETCAST using the

NETCAST button on the TV remote control.

ENTER

Select NetCast.

ENTER

Select NETCAST menu option.

Enjoy Online Service.

Home Menu

Quick Menu

Channel List

Netcast

Screen Remote

ꔛ

Yahoo! (For USA)

Yahoo! TV Widgets give you the best of the

Internet in perfect harmony with the simplicity

and reliability of your TV. TV Widgets deliver a

Cinematic internetTM experience by converting

your favorite web services for viewing on the TV.

ꔛ

Netflix (For USA)

You can instantly watch movies (quite a few new

releases) & TV episodes from Netflix streamed

over the internet to your TV.

To become a Netflix member visit: www.netflix.

com/LG

Note that this service is provided by the Content

Provider, Netflix. It is dependent on Netflix to pro-

vide the data.

ꔛ

Vudu (For USA)

In order to make rental/purchase transactions on

the Vudu service, a user must create an account

on vudu.com.

That account is linked to a specific device, via a

process called “activation”. It is possible to have

multiple devices associated with a single Vudu

account.

Note that this service is provided by the Content

Provider, Vudu. It is dependent on Vudu to pro-

vide the data.

ꔛ

YouTube

YouTube is a video sharing website where users

can upload, view, and share video clips.

ꔛ

Picasa

Picasa is an application from Google that appre-

ciates digital image files.

NOTE

►

The videos list searched from the TV may

different with the list searched from a web

browser on PC.

►

The settings of this TV do not affect the

YouTube’s playback quality.

►

The playback of videos may be paused,

stopped or buffering occurring often

depending on your broadband speed.

► For service that requires log in, join the

applicable service on the website using the

PC and log in through the TV to enjoy

various additional functionalities.

► When you set the city you want with Setup

by pressing the red button, the background

of NetCast will be set to the weather of the

selected city.

►

For Plasma TV: If there is no user action 2

minutes following freezing image or video

on screen, the screensaver will activate

itself preventing fixed image remaining on

screen.

NETCAST

124

YOUTUBE

YouTube is a video sharing website where users can upload, view, and share video clips.

Screen Components

YouTube menu

Videos list

RED Set the option menu.

Return to Netcast menu.

EXIT

Return to TV viewing.

NOTE

►

When you press the Q.menu button while the Youtube video is playing in full mode, you can set

the video options.

125

NETCAST

Home: You can watch the popular video in real time.

Featured: The featured videos list will be displayed.

Popular: The best rated videos list from YouTube server will be displayed.

Most Viewed: The most viewed videos list will be displayed.

Search: The keypad/keyboard menu will be displayed.

History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.

Favorites: In sign-in status, this menu will be displayed the videos list that is arranged in the YouTube

server with your account (Some videos may not appear on the Favorites list, even if the videos are

arranged in the server).

YouTube menu

Stops the video and displays related videos list.

Pause the video while it is playing.

Play the selected video.

Skip the playback forward or backward.

RED Set the option menu.

Return to Netcast menu.

EXIT

Return to TV viewing.

Using the remote control

NETCAST

126

PICASA

Picasa is a photo organizing or sharing website where users can upload, view, and share photos.

Screen Components

Picasa menu

Photo list

Navigate the desired photos.

ENTER

The selected photo file is displayed.

Return to Netcast menu.

EXIT

Return to TV viewing.

127

NETCAST

Home: The featured photos list will be displayed.

Friends:

You can register users with the pictures you want as friends. You can add up to 10 friends.

Search: The keypad/keyboard menu will be displayed.

My Photos:

You can view the pictures uploaded to the Web. This function can only be used when you sign

in.

Picasa menu

PICTURE CONTROL

128

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

You can select a different aspect ratio depending on input source (analog broadcasting, digital broad-

casting, aux).

Select PICTURE.

ENTER

Select Aspect Ratio.

ENTER

Select the desired picture format.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

You can also adjust Aspect Ratio in

the Q.MENU.

󰋬

Press the RATIO button repeatedly to

select the desired picture format.

PICTURE PICTURE

󰋓󰋚 󰋓󰋚

 



 󰌛 

 

   

   

   

   

 



 󰌛 

 

   

   

   

   

󰋲

󰋚

Q.MENU

Select Aspect Ratio.

ENTER

Select Zoom or Cinema

Zoom.

ENTER

Adjust proportion of Zoom or

Cinema Zoom. The Cinema

Zoom adjustment range is

1-16.

ENTER

Move the image on the screen.

󰋢











When adjusting Zoom or Cinema Zoom in Q.MENU

󰋲

󰋚

PICTURE CONTROL

129

16:9

Adjust the picture horizontally, in a linear

proportion to fill the entire screen.

Just Scan

Normally the edges of video signals are

cropped 1-2%. Just Scan turns off this

cropping and shows the complete video.

Notes: If there is noise on the edges of the

original signal, it will be visible when Just Scan

is activated.

Just Scan operates only in DTV/Cable DTV/

Component/HDMI-DTV/DVI-DTV

(720p/1080i/1080p) input source.

Set By Program

Selects the proper picture proportion to

match the source’s image.

4:3

Choose 4:3 when you want to view a picture

with an original 4:3 aspect ratio.

Zoom

Choose Zoom when you want to view the

picture without any alteration. However, the

top and bottom portions of the picture will

be cropped.

Cinema Zoom

Choose Cinema Zoom when you want to

enlarge the picture in correct proportion.

This enlarges an image with cinemascope

aspect ratio (2.35:1) without distortion.

Note: When enlarging or reducing the pic-

ture, the image may become distorted.



(4:3 4:3)

(16:9 16:9)



PICTURE CONTROL

130

PICTURE WIZARD







󰌧

This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen

quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily follow-

ing each step. When you adjust the image to Low, Recommended or High, you can see the example of

the changes you made.

Select PICTURE.

ENTER

Select Picture

Wizard.

ENTER

Adjust Picture Wizard.

ENTER

Adjust Standard/

Preferred.

ENTER

Adjust Black Level.

ENTER

Adjust White Level.

ENTER

Adjust Tint.

󰋬

If you select Preferred, OSD (On Screen

Display) differ from that shown in this manual.

PICTURE 󰋓󰋚

󰌚 󰋚







 

 

󰌚 󰋚

 







 

 

󰌚 󰋚

 



󰌚 󰋚

 











 

 

󰌚 󰋚

 

R G

󰋑

󰋚

 



 󰌛 

 

   

   

   

   

PICTURE CONTROL

131

For LED LCD TV

ENTER

Adjust Horizontal

Sharpness.

ENTER

Adjust Vertical

Sharpness.

ENTER

Adjust Backlight.

ENTER

Adjust Color.

FAV

MARK

CHAR/NUM

Select input source to

apply the settings.

ENTER

Save.

ENTER

Finish the Picture Wizard.

󰋬

If you stop the Picture Wizard before the

final step, the changes will not be saved to

the TV.

󰋬

Once the Picture Wizard sets the picture

quality, Energy Saving is changed to Off

automatically.

󰋬

To reset changes made by Picture Wizard,

operate Picture Reset when Picture Mode

is on Expert1.







 

 

󰌚 󰋚

 







 

 

󰌚 󰋚

 







 

 

󰌚 󰋚

 





 

 

󰌚 󰋚

 





󰋢TV

TV











󰋢

󰋢

󰋢

󰋢





󰌚 󰋚

󰋑󰍆

i.e)









PICTURE CONTROL

132

󰌛

ENERGY SAVING

It reduces the TV’s power consumption.

The default factory setting is adjusted to the comfortable level to be viewed at home.

You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the

Picture Mode.

󰋬

When selecting Screen off, the

screen will turn off after 3 seconds.

Pressing any button of the remote

controller will turn on the screen

again.

󰋬

If you adjust “Energy Saving-Auto,

Maximum”, Backlight option will not

work (For LED LCD TV).

󰋬

When selecting “Energy Saving -

Off, Minimum, or Medium, you can

adjust Backlight feature (For LED

LCD TV).

󰋬

If you adjust “Energy Saving-

Intelligent Sensor”, Sharpness, Color,

Color Temperature feature will not

work (For Plasma TV).

󰋬

When selecting Auto, Backlight is

automatically adjusted through

Intelligent Sensor according to the

surrounding conditions. (For LED

LCD TV)

󰋬

When selecting Off, Energy Saving is

not used.

󰋬

Press the ENERGY SAVING button

repeatedly to select the appropriate

Energy Saving.

󰋬

You can also adjust Energy Saving in

the PICTURE menu.

󰋬

Intelligent Sensor: The most suitable

picture is automatically adjusted

according to the surrounding condi-

tions (For Plasma TV).









  

  

 



 

  

4

8







ENTER

Select Screen Remote.

ENTER

Select ENERGY SAVING.

ENTER

Select ENERGY SAVING repeatedly

to select your desired menu option.











PICTURE CONTROL

133

PRESET PICTURE SETTINGS (PICTURE MODE)

There are factory presets for picture settings available in the user menus. You can use a preset,

change each setting manually, or use the Intelligent Sensor.

Select PICTURE.

ENTER

Select Picture Mode.

ENTER

Select your desired menu option.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Other models Plasma TV

PICTURE 󰋓󰋚

 



 󰌛 

 

   

   

   

   

󰋑

󰋚

󰋬

Vivid, Standard, Cinema, Sport, and Game

Settings are preset for the optimum picture

quality at the factory.

󰋬

Vivid: This is the mode to maximize the effect

of the video in the retail store. Strengthen the

contrast, brightness, color and sharpness for

vivid picture.

󰋬

Standard: This is the mode to realize optimum

viewing condition for the general user.

󰋬

󰌾 (Auto Power Saving): This is the mode to

maximize reducing the power consumption

without hurting the picture quality. This fea-

tures is available only on Plasma TV.

󰋬

Cinema: This mode optimizes video for watch-

ing movies.

󰋬

󰋸 Cinema: This is cinema quality mode to

provide you the experience of watching a movie

at home. The user will be able enjoy the best

level of satisfactory screen quality in any movie

without any separate adjustments. 󰋸Cinema

express the optimal screen quality when it is

darkest.



When selecting 󰋸 Cinema, Aspect ratio

changes to Just scan.

󰋬

󰋸Bright Room: This is the specification to

optimize TV viewing in Bright Room.



When selecting 󰋸Bright Room, Aspect ratio

changes to Just scan.

󰋬

Sport: This is the video mode to emphasize

dynamic video and primary color (e.g, white,

uniform, grass, sky blue etc.) by realizing the

optimal screen for sports.

󰋬

Game: This is the mode to realize fast response

speed in a fast gaming screen.

󰋬

Expert: This is the mode to adjust the video in

detail for video quality expert and general user.

󰋬

You can also adjust Picture Mode in the

Q.MENU.

󰋬

When selecting Intelligent Sensor, Energy

Saving is changed to Auto automatically (For

LED LCD TV).

󰋬

When selecting Intelligent Sensor, it changes

Backlight, contrast, brightness, sharpness, color,

tint and color temperature automatically (For

LED LCD TV).

󰋬

Intelligent Sensor: The most suitable picture is

automatically adjusted according to the sur-

rounding conditions.



󰋢

󰌾

󰋸

󰋸





󰌜

󰌜

󰋑

󰋚





󰋢

󰋸

󰋸





󰌜

󰌜

󰋑

󰋚

PICTURE CONTROL

134

MANUAL PICTURE ADJUSTMENT - USER MODE

Adjust the picture appearance to suit your preference and viewing situations.

Select PICTURE.

ENTER

Select Picture Mode.

ENTER

Select your desired menu option.

ENTER

Select Backlight (For LED LCD TV),

Contrast, Brightness, Sharpness, Color,

Tint, Color Temp., or Advanced Control.

ENTER

Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

Backlight (For LED LCD TV): This

function adjusts the brightness of the

backlight behind the LCD screen.

Adjusting the backlight is recom-

mended when setting the brightness

of the TV. When decreasing the

backlight, the brightness of the black

becomes darker without any loss in

video signal and the power con-

sumption is reduced.

󰋬

Backlight can only be adjusted in "

Energy Saving - Off, Minimum, or

Medium".

󰋬

Contrast: Increase or decrease the

gradient of the video signal. You may

use Contrast when the bright part of

the picture is saturated.

󰋬

Brightness: Adjusts the base level of

the signal in the picture. You may use

Brightness when the dark part of the

picture is saturated.

󰋬

Sharpness: Adjusts the level of crisp-

ness in the edges between the light

and dark areas of the picture. The

lower the level, the softer the image.

󰋬

Color: Adjusts intensity of all colors.

󰋬

Tint: Adjusts the balance between

red and green levels.

󰋬

Color Temp.: Set to warm to enhance

hotter colors such as red, or set to

cool to enhance cooler colors such

as blue.

 

󰋚

󰋱

 

󰋲

PICTURE 󰋓󰋚

󰋑

󰋚

 



 󰌛 

 

   

   

   

   

PICTURE CONTROL

135

PICTURE IMPROVEMENT TECHNOLOGY

(ADVANCED CONTROL)

Advanced Control allows you to adjust some of the advanced features of your LG display.

To reset to the factory default after making adjustments to each input source, execute the Picture

Reset function for each Picture Mode.

Select PICTURE.

ENTER

Select Advanced Control.

ENTER

Select your desired menu option.

4Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

PICTURE 󰋓󰋚

   

   

   

  

  

 





PICTURE 󰋓󰋚

   

   

   

  

  

 





󰋑

󰋚

R G

C

R G

C

 

 

 

 

 





 

 

 

󰋞



 

 

 

 

 

 

 

󰋞



LED LCD TV

Plasma TV

PICTURE CONTROL

136

EXPERT PICTURE CONTROL

󰌜Expert1 and 󰌜Expert2 provide even more advanced picture settings for users. Typical used by

professionals for calibrating the TV.

Select PICTURE.

ENTER

Select Picture Mode.

ENTER

Select 󰌜Expert1 or 󰌜Expert2.

ENTER

Select Expert Control.

ENTER

Select your desired menu option.

6Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

PICTURE PICTURE

󰋓󰋚 󰋓󰋚

 



 󰌛 

 󰌜  󰋚

   

   

   

   

   

   

   

  

  

 





R G

C

 

 





 





 

 

 

 

󰋞



 

 

 

 





 

 

 

 

󰋞



LED LCD TV Plasma TV





󰋢󰌜

󰌜

󰋑

󰋚

PICTURE CONTROL

137

Dynamic Contrast

󰋬

Adjusts the contrast to keep it at the best level according to the brightness

of the screen. The picture is improved by making bright parts brighter and

dark parts darker.

Dynamic Color

󰋬

Adjusts screen colors so that they look livelier, richer and clearer. This fea-

ture enhances hue, saturation and luminance so that red, blue, and green

look more vivid.

Skin Color

󰋬

It detects the skin area of video and adjusts it to express a natural skin color.

Noise Reduction

󰋬

Reduces screen noise without compromising video quality.

Digital Noise

Reduction

󰋬

Removes noise caused by compressing video.

Gamma

󰋬

You can adjust brightness of dark areas and middle gray level areas of the

picture.

Low : Make brighter and middle gray level areas of the picture brighter.

Medium : Express original picture levels.

High: Make dark and middle gray level areas of the picture darker.

Black Level

Low: The reflection of the screen gets darker.

High: The reflection of the screen gets brighter.

󰋬

Set black level of the screen to proper level.

󰋬

This function is available in the following modes: TV, AV (NTSC-M), HDMI

or Component.

Clear White

󰋬

Make the white area of screen brighter and more white.

Eye Care

󰋬

Adjust the brightness of the screen to prevent the screen from being too

bright. Dims extremely bright pictures.

󰋬

This feature is enabled in “Picture Mode-Standard, Sports, Game”.

Real Cinema

Film Mode

󰋬

Makes video clips recorded in film look more natural by eliminating judder

effect.

󰋬

DVD and Blu-ray movies are filmed at 24 frames per second (fps). With

LG Real Cinema, every frame is consistently processed 5 times in 1/24 of

a second producing 120 fps with TruMotion or 2 times in 1/24 of a second

producing 48 fps without TruMotion, thus totally eliminating the judder

effect.

󰋬

This function can also work when TruMotion is off.

Color Gamut

LED LCD TV: Advanced Control

Plasma TV: Advanced Control, Expert Control

Standard/sRGB: Displays standard set of colors.

Wide: Increase number of colors used.

󰋬

Maximize the utilization of colors to increase color quality.

LED LCD TV: Expert Control

󰋬

Displays color domain of the signal.

Standard: Displays standard set of colors.

Wide: Increase number of colors used.

EBU: Mode to display EBU standard color area.

SMPTE: Mode to display SMPTE standard color area.

BT709: Mode to display BT709 standard color area.

*This feature is not available for all models.

PICTURE CONTROL

138

Edge Enhancer

󰋬

Show clearer and distinctive yet natural edges in the video.

xvYCC

󰋬

This produces richer colors.

󰋬

This feature represents rich color as much as conventional video signal.

󰋬

This function is enabled in "Picture mode - Cinema / 󰋸Cinema / 󰋸

Bright Room, 󰌜Expert" when a xvYCC signal is inputted through HDMI.

Color Filter

󰋬

This function filters specific colors in the video.

You can use the RGB filter to set color saturation and hue accurately.

Expert Pattern

󰋬

This is a pattern used for expert adjustment.

󰋬

This function is enabled in "Picture mode - 󰌜Expert" when you watch

DTV.

Color Temperature

󰋬

Adjusts the overall color of the screen by changing the white baseline.

a. Gamma : Select 1.9, 2.2, 2.4

b. Method : 2 Points

- Pattern: Inner, Outer

- Red/Green/Blue Contrast, Red/Green/Blue Brightness:

The adjustment range is -50 - +50.

c-1. Method : 10 Point IRE (LED LCD TV)

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit to display the size of the video

signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green

or Blue according to each setting.

- Luminance: This function displays calculated luminance value for 2.2

gamma. You can input luminance value you want at 100 IRE, then the

target luminance value for 2.2 gamma is displayed at every 10 steps from

10 IRE to 90 IRE.

- Red/Green/Blue: The adjustment range is -50 - +50.

c-2. Method : 20 Point IRE (Plasma TV)

- IRE (Institute of Radio Engineers) is the unit to display the size of the video

signal and can be set among 5, 10, 15 - 100. You can adjust Red, Green

or Blue according to each setting.

- Red/Green/Blue: The adjustment range is -50 - +50.

d. Apply to all inputs

Color Management

System

󰋬

A tool used by the experts to make adjustments by using the test patterns,

this does not affect other colors but can be used to selectively adjust the

6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).

Color difference may not be distinctive even when you make the adjust-

ments for the general video.

Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.

- Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is

-30 - +30.

- Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30

- +30.

- This feature is disabled in RGB-PC and HDMI-PC mode.

PICTURE CONTROL

139

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

PICTURE 󰋓󰋚 PICTURE 󰋓󰋚

   

   

   

  

  

 









R G

C

R G

C

󰋑

󰋚

   

   

   

  

  

 















Select PICTURE.

ENTER

Select Picture Reset.

ENTER

Select Yes.

ENTER

Initialize the adjusted value.

EXIT

Return to TV viewing.

PICTURE CONTROL

140

TRUMOTION - For LED LCD TV

Advance video technology that provides clearer, smoother images, even during fast action scenes cre-

ating a more stable structure for a crisper picture.

󰋬

Off: Turn off TruMotion operation.

󰋬

Low: Provides smooth picture move-

ment. Use this setting for standard

use.

󰋬

High: Provides smoother picture

movement.

󰋬

Judder: Adjusts noise of the screen.

󰋬

Blur: Adjusts after-image of the screen.

󰋬

TruMotion works with all inputs except

PC mode.

󰋬

If you enable "TruMotion", noise may

appear on the screen.

If this occurs,

set "TruMotion" to "Off".

󰋬

If you select "Picture Mode-Game"

set "TruMotion" to "Off".

PICTURE 󰋓󰋚

 





Select PICTURE.

ENTER

Select TruMotion.

ENTER

Select Low, High, User, or Off.

ENTER

Select Judder or Blur.

5Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋑

󰋚

   

   

   

  

  

 





R G

C

Adjustment for TruMotion (Judder

and Blur) with selecting User

󰋚

PICTURE CONTROL

141

LED LOCAL DIMMING - For LED LCD TV

After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve

the contrast ratio. This feature is disabled in “Picture Mode-Game”.

PICTURE 󰋓󰋚 PICTURE 󰋓󰋚

   

   

   

  

  

 





R G

C

R G

C



󰋢

󰋚

󰋱

   

   

   

  

  

 





Select PICTURE.

ENTER

Select LED Local Dimming.

ENTER

Select On or Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋚

󰋱

PICTURE CONTROL

142

POWER INDICATOR - For LED LCD TV

Adjust the power/standby indicator light on the front of the TV.

󰋬

Standby Light: Determines whether

to set the indicator light on the front

of the TV to On or Off in standby

mode.

󰋬

Power Light: Determines whether to

set the indicator light on the front of

the TV to On or Off when the power

turns on.

󰋬

If you select 3D mode, "Power

Indicator" is turned off automatically

(Except 50/60PK950).

Select OPTION.

ENTER

Select Power Indicator.

ENTER

Select Standby Light or Power Light.

4Select your desired options.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚  󰋓󰋚

󰋑

󰋚



 





 

 



 





 

 

 

 



PICTURE CONTROL

143

IMAGE STICKING MINIMIZATION (ISM) METHOD - For Plasma TV

A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You

can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost

image.

Select OPTION.

ENTER

Select ISM Method.

ENTER

Select Normal, Orbiter, Color Wash,

or White Wash.

EXIT

Return to TV viewing.

󰋬

Normal: If image sticking is never a

problem, ISM is not necessary - set

to Normal.

󰋬

Orbiter: To avoid a ghost image on

the screen, the image will move every

2 minutes to help prevent ghost

images. However, it is best not to

allow any fixed image to remain on

the screen.

󰋬

Color Wash: The color block with the

screen moved a little and the white

pattern are displayed. It is difficult to

see the after image on all colors.

Once it has been corrected it will not

be visible in any color.

󰋬

White Wash: White Wash removes

ghost images from the screen. Use

sparingly. Watch the TV normally for

a while before using this feature to

see if the ghost image disappears on

its own.

NOTE

►An excessive ghosted image may be

impossible to clear entirely with White

Wash. To return to normal viewing, press

the any button.

󰋑

󰋚



 





 

 

 󰋓󰋚  󰋓󰋚



 





 

 

󰋢







󰋲

󰋚

SOUND & LANGUAGE CONTROL

144

AUTO VOLUME

SOUND & LANGUAGE CONTROL

Auto Volume makes sure that the volume level remains consistent whether you are watching a com-

mercial or a regular TV program.

Because each broadcasting station has its own signal conditions, volume adjustment may be needed

every time the channel is changed. This feature allows users to enjoy stable volume levels by making

automatic adjustments for each program.

Select AUDIO.

ENTER

Select Auto Volume.

ENTER

Select On or Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

R

󰋲

󰋚

 

 󰌖

  

 

  

   

   

  

 󰋓󰋚

 

 󰌖

  

 

  

   

   

  

R



󰋢 󰋚

󰋱

SOUND & LANGUAGE CONTROL

145

CLEAR VOICE II

By differentiating the human sound range from others, it improves the sound quality of voices.

Select AUDIO.

ENTER

Select Clear Voice II.

ENTER

Select On or Off.

4Select Level.

5Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Adjustment for Clear Voice Level

with selecting On

 󰋓󰋚

R

󰋑

󰋚

 

 󰌖

  

 

  

   

   

  

 󰋓󰋚

 

 󰌖

  

 

  

   

   

  

R

 

󰌖



+

SOUND & LANGUAGE CONTROL

146

BALANCE

Adjust the left/right sound of speaker to suit your taste and room situations.

Select AUDIO.

ENTER

Select Balance.

ENTER

Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋑

󰋚

R

 

 󰌖

  

 

  

   

   

  

 󰋓󰋚

 

 󰌖

   󰋚

 

  

   

   

  

R





R

 

SOUND & LANGUAGE CONTROL

147

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment using factory presets.

Select AUDIO.

ENTER

Select Sound Mode.

ENTER

Select Standard, Music, Cinema,

Sport, or Game.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

Standard, Music, Cinema, Sport, and

Game are preset for optimum sound

quality at the factory.

󰋬

You can also adjust Sound Mode in

the Q.MENU.

󰋬

Standard: Offers standard-quality

sound.

󰋬

Music: Optimizes sound for listening

to music.

󰋬

Cinema: Optimizes sound for watch-

ing movies.

󰋬

Sport: Optimizes sound for watching

sports events.

󰋬

Game: Optimizes sound for playing

games.

 󰋓󰋚

R

󰋑

󰋚

 

 󰌖

  

 

  

   

   

  

 󰋓󰋚

 

 󰌖

  

 

  

   

   

  

R

󰋢









󰋲

󰋚

SOUND & LANGUAGE CONTROL

148

SOUND SETTING ADJUSTMENT - USER MODE

Adjust the sound to suit your taste and room situations.

Select AUDIO.

ENTER

Select Sound Mode.

ENTER

Select Standard, Music, Cinema,

Sport, or Game.

ENTER

Select Infinite Sound, Treble, or Bass.

ENTER

Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

If sound quality or volume is not at

the level you want, it is recommended

to use a separate home theater sys-

tem or amp to cope with different

user environments.

󰋬

If you select “Clear Voice II-On”, the

Infinite Sound feature will not oper-

ate.

󰋬

Infinite Sound: Infinite Sound is a

patented LG proprietary sound pro-

cessing technology that strives

immersive 5.1 surround sound with

just two front speakers.

 󰋓󰋚

R

󰋑

󰋚

 

 󰌖

  

 

  

   

   

  

 󰋓󰋚

 

 󰌖

  

 

  

   

   

  

R



 









SOUND & LANGUAGE CONTROL

149

AUDIO RESET

Settings of the selected Sound Mode return to the default factory settings.

 󰋓󰋚

R

󰋑

󰋚

   󰌖

  

 

  

   

   

  

 

 󰋓󰋚

   󰌖

  

 

  

   

   

  

 

R





Select AUDIO.

ENTER

Select Reset.

ENTER

Select Yes.

ENTER

Initialize the adjusted value.

EXIT

Return to TV viewing.











SOUND & LANGUAGE CONTROL

150

TV SPEAKERS ON/OFF SETUP

If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.

Select AUDIO.

ENTER

Select TV Speaker.

ENTER

Select On or Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

R

󰋚

󰋱

   󰌖

  

 

  

   

   

  

 

 󰋓󰋚

   󰌖

  

 

  

   

   

  

 

R



󰋢 󰋚

󰋱

SOUND & LANGUAGE CONTROL

151

STEREO/SAP BROADCAST SETUP

On analog signals, this TV can receive MTS stereo programs and any SAP (Secondary Audio

Program) that accompanies the stereo program if the station transmits an additional sound signal.

Mono sound is automatically used if the broadcast is only in Mono.

Analog TV Digital TV

Q.MENU

Select SAP.

ENTER

Select Mono, Stereo, or

SAP.

EXIT

Return to TV viewing.

Q.MENU

Select Multi Audio.

ENTER

Select other languages.

EXIT

Return to TV viewing.

󰋚



󰌚

SOUND & LANGUAGE CONTROL

152

AUDIO LANGUAGE

This feature operates only in DTV/Cable DTV mode.

Select OPTION.

ENTER

Select Language.

ENTER

Select Audio Language.

4Select your desired language.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋲

󰋚



 





 

 

 󰋓󰋚



 





 

 

 

 



SOUND & LANGUAGE CONTROL

153

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Select OPTION.

ENTER

Select Language.

ENTER

Select Menu Language.

4Select your desired language.

From this point on, the on-screen menus

will be shown in the selected language.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋲

󰋚



 





 

 

 󰋓󰋚



 





 

 

 

 



SOUND & LANGUAGE CONTROL

154

CAPTION MODE

Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying

captioning information if provided on a program. Analog caption displays information at any position

on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would

be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to

memorize the caption/text mode which was last set when you turned the power off. This function is

only available when Caption Mode is set On.

Analog Broadcasting System Captions

Select OPTION.

ENTER

Select Caption.

ENTER

Select On.

4Select CC1-4 or Text1-4.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

When selecting Off, Sub-menus for

Analog, DTV, and Digital Option

become disabled.

󰋬

Caption

The term for the words that scroll

across the bottom of the TV screen;

usually the audio portion of the pro-

gram provided for the hearing

impaired.

󰋬

Text

The term for the words that appear in

a large black frame and almost cover

the entire screen; usually messages

provided by the broadcaster.

 󰋓󰋚

󰋑

󰋚



 





 

 

 󰋓󰋚



 





 

  



 



SOUND & LANGUAGE CONTROL

155

Digital Broadcasting System Captions

Choose the language you want the DTV/Cable DTV Captions to appear in.

Other Languages can be chosen for digital sources only if they are included on the program.

This function in only available when Caption Mode is set On.

Select OPTION.

ENTER

Select Caption.

ENTER

Select On.

4Select CC1-4, Text1-4, or Service1 - 6.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋑

󰋚



 





 

 

 󰋓󰋚



 





 

  



 



SOUND & LANGUAGE CONTROL

156

Caption Option

Customize the DTV/Cable DTV captions that appear on your screen.

This function in only available when Caption Mode is set On.

Select OPTION.

ENTER

Select Caption.

ENTER

Select On.

4Select Digital Option.

ENTER

Select Custom.

6Customize the Size, Font, etc., to your

preference. A preview icon is provided

at the bottom of the screen, use it to

see the caption language.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

Size: Set the word size.

󰋬

Font: Select a typeface for the text.

󰋬

Text Color: Choose a color for the

text.

󰋬

Text Opacity: Specify the opacity for

the text color.

󰋬

Bg (Background) Color: Select a

background color.

󰋬

Bg (Background) Opacity: Select the

opacity for the background color.

󰋬

Edge Type: Select an edge type.

󰋬

Edge Color: Select a color for the

edges.



 

 

 

 

 

 

 

 



 󰋓󰋚



   󰋚





 

 





 



157

TIME SETTING

CLOCK SETTING

TIME SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal.

The digital channel signal includes information for the current time provided by the broadcasting sta-

tion.

Set the clock manually if the current time is set incorrectly by the auto clock function.

Select TIME.

ENTER

Select Clock.

ENTER

Select Auto.

4Select your viewing area time zone.

USA: Eastern, Central, Mountain,

Pacific, Alaska, or Hawaii.

Canada: Eastern, Central, Mountain,

Pacific, New Foundland, or Atlantic.

5Select Auto, Off, or On (depending

on whether or not your viewing area

observes Daylight Saving time).

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚



 

 

 

 󰋓󰋚

   󰋚

 

 

 



 

 

 

 

 

 

 



󰋲

󰋚

TIME SETTING

158

Manual Clock Setup

If the current time setting is wrong, reset the clock manually.

Select TIME.

ENTER

Select Clock.

ENTER

Select Manual.

4Select the Year, Month, Date, Hour, or Minute

option.

5Set the Year, Month, Date, Hour, or Minute

option.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚



 

 

 

 󰋓󰋚

   󰋚

 

 

 



 

 

 

 

 

 

 



󰋲

󰋚

159

TIME SETTING

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set.

The Off Time function overrides the On Time function if they are both set to the same time.

The TV must be in standby mode for the On Time to work.

If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV

will automatically revert to standby mode.

󰋬

To cancel On/Off Time function, select

Off.

󰋬

Only for On Time function

Select TIME.

ENTER

Select Off Time or On Time.

ENTER

Select Repeat.

4Select Off, Once, Daily, Mon.~Fri.,

Mon.~Sat., Sat.~ Sun., or Sun..

5Select and set Hour or Minute.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

1Select Input.

2Select the desired input source.

3When Selecting TV:

set the channel at turn-on.

4Adjust to sound level at

turn-on.

 󰋓󰋚



 

 

 

 󰋓󰋚



 

  󰋚

 

󰋟

 

 

 

 TV

 

 



󰋑

󰋚

TIME SETTING

160

SLEEP TIMER SETTING

The Sleep Timer turns the TV off at the preset time.

Note that this setting is cleared when the TV is turned off.

Select TIME.

ENTER

Select Sleep Timer.

ENTER

Make appropriate adjustments.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

To cancel the Sleep Timer, select Off.

󰋬

You can also adjust Sleep Timer in

the Q.MENU.

 󰋓󰋚



 

 

 

 󰋓󰋚



 

 

   󰋚

󰋢

















󰋚

󰋱

󰋲

󰋚

161

PARENTAL CONTROL / RATING

PARENTAL CONTROL / RATINGS

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by

the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be

blocked by choosing the type of the program and the categories. It is also possible to block all pro-

gram viewing for a time period. To use this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television mov-

ies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the

theaters or direct-to-video movies use the Movie Rating System (MPAA) only.

Ratings for Television programs including made-for-TV movies:

󰋬

TV-G (General audience)

󰋬

TV-PG

(Parental guidance suggested)

󰋬

TV-14 (Parents strongly cautioned)

󰋬

TV-MA (Mature audience only)

󰋬

TV-Y (All children)

󰋬

TV-Y7 (Children 7 years older)

Set up blocking schemes to block specific channels, ratings, and external viewing sources.

A password is required to gain access to this menu.

Setting up Your Password

SET PASSWORD & LOCK SYSTEM

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

󰋬

Enter the password as requested.

󰋬

The TV is set up with the initial

password “0-0-0-0”.

󰋬

If you forget your password, press

“0-3-2-5” on the remote control.



****



 󰋓󰋚



 

  

  

  

  

  

  

󰋲

󰋚

 󰋓󰋚



 

  

  

  

  

  

 

󰋲

󰋚

For USA For Canada

PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

162

Change the password by inputting a new password twice.

Set Password

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Set Password.

ENTER

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Choose any 4 digits for your new

password.

As soon as the 4 digits are entered,

re-enter the same 4 digits on the

Confirm.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚



 

  

  

  

  

  

  

󰋲

󰋚

 󰋓󰋚



 

  

  

  

  

  

  

 ****

 ****



163

PARENTAL CONTROL / RATING

Enables or disables the blocking scheme you set up previously.

Lock System

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Lock System.

ENTER

Select On or Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

When you select On, the Lock

System is enable.

 󰋓󰋚



 

  

  

  

  

  

  

 󰋓󰋚



   󰋚

  

  

  

  

  

  



󰋢 󰋚

󰋱

󰋑

󰋚

PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

164

CHANNEL BLOCKING

Blocks any channels that you do not want to watch or that you do not want your children to watch.

󰋬

If a channel is locked, enter the

password to unlock it temporarily.

5-13-1 7-1

󰋚

󰋖

󰋓

 

󰍈 󰌚

 

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Block Channel.

ENTER

Select a channel to block or unblock.

5Block or unblock a channel.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

YELLOW

 󰋓󰋚



 

  

  

  

  

  

  

󰋑

󰋚

DTV TV  

165

PARENTAL CONTROL / RATING

MOVIE & TV RATING

Movie Rating (MPAA)

- For USA

Blocks movies according to the movie ratings limits specified, so children cannot view certain movies.

You can set the ratings limit by blocking out all the movies with the ratings above a specified level.

Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such

as soap operas.

󰋬

If Movie Rating, TV Rating-Children

or TV Rating-General is locked, enter

the password to unlock it temporarily.

󰋬

G (General audience)

󰋬

PG (Parental guidance suggested)

󰋬

PG-13 (Parents strongly cautioned)

󰋬

R (Restricted)

󰋬

NC-17 (No one 17 and under admit-

ted)

󰋬

X (Adult only)

󰋬

Blocking Off (Permits all programs)

󰋬

If you set PG-13: G and PG movies

will be available, PG-13, R, NC-17 and

X will be blocked.

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Movie Rating.

ENTER

Select G, PG, PG-13, R, NC-17, X, or

Blocking Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚



 

  

  

  

  

  

  

 󰋓󰋚



 

  

    󰋚

  

  

  

  





󰋤





󰋑

󰋚

PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

166

TV Rating Children

- For USA

Prevents children from watching certain children's TV programs, according to the ratings limit set. The

children rating does not apply to other TV programs. Unless you block certain TV programs intended

for mature audiences in the TV Rating - sub menu, your children can view those programs.

󰋬

Age (applies to TV-Y, TV-Y7)

󰋬

Fantasy Violence (applies to TV-Y7)

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select TV Rating-Children.

ENTER

Select Age or Fantasy Violence.

ENTER

Select block options.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚



 

  

  

  

  

  

  

 󰋓󰋚



 

  

  

   󰋚

  

  

  

󰋚





󰋑

󰋚

167

PARENTAL CONTROL / RATING

TV Rating General

- For USA

Based on the ratings, blocks certain TV programs that you and your family do not want to view.

󰋬

Age (applies to TV-G,TV-PG,TV-

14,TV-MA).

󰋬

Dialogue-sexual dialogue (applies to

TV-PG,TV-14).

󰋬

Language-adult language (applies to

TV-PG, TV-14, TV-MA).

󰋬

Sex-sexual situations (applies to

TV-PG, TV-14, TV-MA).

󰋬

Violence (applies to TV-PG, TV-14,

TV-MA).

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select TV Rating-General.

ENTER

Select Age, Dialogue, Language, Sex

or Violence.

ENTER

Select block options.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚



 

  

  

  

  

  

  

 󰋓󰋚



 

  

  

  

   󰋚

  

  

󰋚











󰋑

󰋚

PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

168

TV Rating English

- For CANADA

Selecting Canadian English rating system.

󰋬

If TV Rating-English or TV Rating-

French is locked, enter the password

to unlocked it temporarily.

󰋬

E (Exempt)

󰋬

C (Children)

󰋬

C8+ (Children eight years and older)

󰋬

G (General programming, suitable

for all audiences)

󰋬

PG (Parental Guidance)

󰋬

14+ (Viewers 14 years and older)

󰋬

18+ (Adult programming)

󰋬

Blocking Off (Permits all programs)

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select TV Rating-English.

ENTER

Select E, C, C8+, G, PG, 14+, 18+, or

Blocking Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋑

󰋚



 

  

  

  

  

  

 

 󰋓󰋚



 

  

  

  

  

  

 

C8+





󰋤





169

PARENTAL CONTROL / RATING

TV Rating French

- For CANADA

Selecting Canadian French rating system.

󰋬

E (Exempt)

󰋬

G (General)

󰋬

8ans+ (General-Not convenient for

little children)

󰋬

13ans+ (Not convenient for children

of 13 years and younger)

󰋬

16ans+ (Not convenient for children

of 16 years and younger)

󰋬

18ans+ (This programs is only for

adults)

󰋬

Blocking Off (Permits all programs)

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select TV Rating-French.

ENTER

Select E, G, 8ans+, 13ans+, 16ans+,

18ans+, or Blocking Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋑

󰋚



 

  

  

  

  

  

 

 󰋓󰋚



 

  

  

  

  

  

 









󰋤





PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

170

DOWNLOADABLE RATING

This function is available only for digital channels.

This function operates only when TV has received Region5 Rating data.

󰋬

If a Downloadable rating is locked,

enter the password to unlock it tem-

porarily.

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Downloadable Rating.

ENTER

Select desired Downloadable Rating

option.

ENTER

Select desired option and block it.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋑

󰋚



 

  

  

  

  

  

  

 󰋓󰋚



 

  

  

  

  

   󰋚

  

󰋚













󰋞



󰋬

Based on rating table, your TV's

OSD (On Screen Display) may dif-

fer slightly from what is shown in

this manual.

171

PARENTAL CONTROL / RATING

EXTERNAL INPUT BLOCKING

Enables you to block an input.

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Input Block.

ENTER

Select input source.

5Select On or Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

 󰋓󰋚

󰋑

󰋚

   

  

  

  

  

  

  

 

 󰋓󰋚

   

  

  

  

  

  

  

 

 

 

 

 

 

 

 

 

 



PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

172

KEY LOCK

This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so

that it can only be used with the remote control.

This TV is programmed to remember which option it was last set to even if you turn the TV off.

󰋬

In Key Lock ‘On’, if the TV is turned

off, press the / I, INPUT, CH (󰋝󰋞or

󰌝󰌞) button on the TV or POWER,

INPUT, CH (󰌝󰌞) or NUMBER but-

tons on the remote control.

󰋬

With the Key Lock On, the display

‘  Key Lock’ appears on the screen

if any button on the front panel is

pressed while viewing the TV.

 󰋓󰋚

󰋚

󰋱

   

  

  

  

  

  

  

 

 󰋓󰋚

󰋚

󰋱

   

  

  

  

  

  

  

  

󰋢 󰋚

󰋱

ENTER

Select LOCK.

1 2

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Input the password.

3Select Key Lock.

ENTER

Select On or Off.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

173

APPENDIX

Abnormal Operation

The remote control

doesn’t work

󰋬

Check to see if there is any object between the product and the remote

control causing obstruction. Ensure you are pointing the remote control

directly at the TV.

󰋬

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

󰋬

Ensure that the correct remote operating mode is set: TV, VCR etc.

󰋬

Install new batteries.

TV turns off suddenly

󰋬

Is the sleep timer set?

󰋬

Check the power control settings. Power interrupted.

󰋬

If there is no signal, the TV turns off automatically in 15 minutes.

Video Problems

No picture &No sound

󰋬

Check whether the product is turned on.

󰋬

Try another channel. The problem may be with the broadcast.

󰋬

Is the power cord inserted into wall power outlet?

󰋬

Check your antenna direction and/or location.

󰋬

Test the wall power outlet, plug another product’s power cord into the

outlet where the product’s power cord was plugged in.

Picture appears slowly

after switching on

󰋬

This is normal, the image is muted during the product startup process.

Please contact your service center, if the picture has not appeared after

five minutes.

No or poor color or

poor picture

󰋬

Adjust Color in menu option.

󰋬

Keep a sufficient distance between the product and the VCR.

󰋬

Try another channel. The problem may be with the broadcast.

󰋬

Are the video cables installed properly?

󰋬

Activate any function to restore the brightness of the picture.

Horizontal/vertical bars

or picture shaking

󰋬

Check for local interference such as an electrical appliance or power

tool.

Poor reception on

some channels

󰋬

Station or cable product experiencing problems, tune to another station.

󰋬

Station signal is weak, reorient antenna to receive weaker station.

󰋬

Check for sources of possible interference.

Lines or streaks in pic-

tures

󰋬

Check antenna (Change the direction of the antenna).

No picture when con-

necting HDMI

󰋬

If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers

or no screen display. In this case use the latest cables that support High

Speed HDMI.

*This feature is not available for all models.

TROUBLESHOOTING

174

APPENDIX

Audio Problems

No output from one

of the speakers

󰋬

Adjust Balance in menu option.

Unusual sound from

inside the product

󰋬

A change in ambient humidity or temperature may result in an unusual

noise when the product is turned on or off and does not indicate a fault

with the product.

No sound

when connecting

HDMI/USB

󰋬

Check High Speed HDMI cable.

󰋬

Check USB cable over version 2.0.

󰋬

Use normal MP3 file.

PC Mode Problems

The signal is out of

range

󰋬

Adjust resolution, horizontal frequency, or vertical frequency on the PC.

󰋬

Check the input source.

Vertical bar or stripe

background &

Horizontal Noise &

Incorrect position

󰋬

Activate the Auto configure feature or adjust size, phase, or H/V position.

(Option)

Screen color is unsta-

ble or single color

󰋬

Check the signal cable.

󰋬

Reinstall the PC video card.

When connecting the

HDMI cable to the PC,

there is no audio.

󰋬

Check the manual for the video card in the PC to see if it supports

HDMI audio and how to set it up properly.

*This feature is not available for all models.

175

APPENDIX

Movie List Problems

The file does not

appear on the Movie

List.

󰋬

Check whether the file extension is supported.

Message is displayed

saying “This file is

invalid” or the audio is

working normally but

the video is not work-

ing normally.

󰋬

Check whether the file is playing normally on a PC. (Check whether the

file is damaged.)

󰋬

Check whether the resolution is supported.

󰋬

Check whether the video/audio codec is supported.

󰋬

Check whether the frame rate is supported.

Message is displayed

saying “Unsupported

Audio” or the video is

working normally but

the audio is not work-

ing normally.

󰋬

Check whether the file is playing normally on a PC. (Check whether the

file is damaged.)

󰋬

Check whether the audio codec is supported.

󰋬

Check whether the bit rate is supported.

󰋬

Check whether the sample rate is supported.

Subtitle is not working.

󰋬

Check whether the file is playing normally on a PC. (Check whether the

file is damaged.)

󰋬

Check whether the video file and subtitle file name are the same.

󰋬

Check whether the video file and subtitle file are located in the same

folder.

󰋬

Check whether the subtitle file is supported.

󰋬

Check whether the language is supported. (When you open the subtitle

file on a PC, you can check the language of the subtitle file.)

176

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you

can enjoy your new TV.

Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of

lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s

almost dry, and then use it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

󰋬

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

󰋬

Please be sure not to use a wet cloth.

Extended Absence

CAUTION

► If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to

unplug the power cord to protect against possible damage from lightning or power surges.

177

APPENDIX

PRODUCT SPECIFICATIONS

MODELS 47LX9500

(47LX9500-UA)

55LX9500

(55LX9500-UA)

Dimensions

(Width x

Height

x Depth)

With stand

1085.9 mm x 710.6 mm x 255.0 mm

(42.7 inch x 27.9 inch x 10.0 inch)

1255.8 mm x 805.0 mm x 255.0 mm

(49.4 inch x 31.6 inch x 10.0 inch)

Without stand

1085.9 mm x 654.2 mm x 31.6 mm

(42.7 inch x 25.7 inch x 1.2 inch)

1255.8 mm x 749.6 mm x 31.6 mm

(49.4 inch x 29.5 inch x 1.2 inch)

Weight With stand

26.7 kg (58.8 lbs) 32.7 kg (72.0 lbs)

Without stand

22.1 kg (48.7 lbs) 28.1 kg (61.9 lbs)

Power requirement AC 120 V ~ 50 / 60 Hz

Television System NTSC-M, ATSC, 64 & 256 QAM

Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External Antenna Impedance 75 Ω

Environment

condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Storage Humidity Less than 85 %

󰋬

The specifications shown above may be changed without prior notice for quality improvement.

178

APPENDIX

MODELS 47LEX8

(47LEX8-UA)

55LEX8

(55LEX8-UA)

Dimensions

(Width x

Height

x Depth)

With stand

1126.6 mm x 757.9 mm x 284.4 mm

(44.3 inch x 29.8 inch x 11.1 inch)

1306.0 mm x 867.0 mm x 345.0 mm

(51.4 inch x 34.1 inch x 13.5 inch)

Without stand

1126.6 mm x 692.0 mm x 29.3 mm

(44.3 inch x 27.2 inch x 1.1 inch)

1306.0 mm x 797.0 mm x 30.7 mm

(51.4 inch x 31.3 inch x 1.2 inch)

Weight With stand

22.9 kg (50.4 lbs) 34.5 kg (76.0 lbs)

Without stand

19.6 kg (43.2 lbs) 28.8 kg (63.4 lbs)

MODELS 60LEX9

(60LEX9-UA)

72LEX9

(72LEX9-UA)

Dimensions

(Width x

Height

x Depth)

With stand

1126.6 mm x 757.9 mm x 284.4 mm

(44.3 inch x 29.8 inch x 11.1 inch)

1306.0 mm x 867.0 mm x 345.0 mm

(51.4 inch x 34.1 inch x 13.5 inch)

Without stand

1126.6 mm x 692.0 mm x 29.3 mm

(44.3 inch x 27.2 inch x 1.1 inch)

1306.0 mm x 797.0 mm x 30.7 mm

(51.4 inch x 31.3 inch x 1.2 inch)

Weight With stand

22.9 kg (50.4 lbs) 34.5 kg (76.0 lbs)

Without stand

19.6 kg (43.2 lbs) 28.8 kg (63.4 lbs)

Power requirement AC 120 V ~ 50 / 60 Hz

Television System NTSC-M, ATSC, 64 & 256 QAM

Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External Antenna Impedance 75 Ω

Environment

condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Storage Humidity Less than 85 %

󰋬

The specifications shown above may be changed without prior notice for quality improvement.

179

APPENDIX

Power requirement AC 100-240 V ~ 50 / 60 Hz

Television System NTSC-M, ATSC, 64 & 256 QAM

Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External Antenna Impedance 75 Ω

Environment

condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Storage Humidity Less than 85 %

󰋬

The specifications shown above may be changed without prior notice for quality improvement.

MODELS 50PK950

(50PK950-UA, 50PK950-UF)

60PK950

(60PK950-UA, 60PK950-UF)

Dimensions

(Width x

Height

x Depth)

With stand

1190.0 mm x 804.5 mm x 294.5 mm

(46.8 inch x 31.6 inch x 11.5 inch)

1408.8 mm x 937.9 mm x 384.0 mm

(55.4 inch x 36.9 inch x 15.1 inch)

Without stand

1190.0 mm x 737.0 mm x 52.4 mm

(46.1 inch x 29.0 inch x 2.0 inch)

1408.8 mm x 860.7 mm x 52.4 mm

(55.4 inch x 33.8 inch x 2.0 inch)

Weight With stand

34.8 kg (76.7 lbs) 50.9 kg (112.2 lbs)

Without stand

30.2 kg (66.5 lbs) 43.3 kg (95.4 lbs)

180

APPENDIX

IR CODES

󰋬

Configuration of frame

1st frame

Repeat frame

󰋬

Lead code

󰋬

Repeat code

󰋬

Bit description: Tf

󰋬

Frame interval: Tf

The waveform is transmitted as long as a key is depressed.

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

Bit ”0” Bit ”1”

1. How to Connect

󰋬

Connect your wired remote control to the Remote Control port on the TV.

2. Remote Control IR Codes

󰋬

Output waveform

Single pulse, modulated with 37.917 KHz signal at 455 KHz

4.5 ms

2.25 ms

9 ms

0.55 ms

Tf Tf

Tf=108 ms @455 KHz

0.56 ms 0.56 ms

1.12 ms 2.24 ms

Low

custom code

Lead

code

High

custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code

Lead code Low custom code

Repeat code Tf

High custom code Data code Data code

Lead code Low custom code High custom code Data code

High custom code Data code Data code

Carrier frequency

FCAR = 1/TC = fOSC/12

Duty ratio = T1/TC = 1/3

*This feature is not available for all models.

181

APPENDIX

Code

(Hexa) Function Note Code

(Hexa) Function Note

00 CH 󰌝Remote Control Button B0 󰌧Remote Control Button

01 CH 󰌞Remote Control Button B1 󰌨Remote Control Button

02 VOL + Remote Control Button BA 󰌩 Remote Control Button

03 VOL - Remote Control Button D6 TV Discrete IR Code

Remote Control Button (TV Input Selection)

Remote Control Button C4 POWER ON Discrete IR Code

08 Remote Control Button (Only Power On)

(Power On/Off) C5 POWER OFF Discrete IR Code

09 MUTE/DELETE Remote Control Button (Only Power Off)

0B INPUT Remote Control Button 5A AV1 Discrete IR Code

0F TV Remote Control Button (AV1 Input Selection)

10-19 Number 0-9 Remote Control Button D0 AV2 Discrete IR Code

1A FLASHBK Remote Control Button (AV2 Input Selection)

1E FAV/MARK Remote Control Button BF COMPONENT1 Discrete IR Code

28 BACK Remote Control Button (Component1 Input Selection)

30 AV MODE Remote Control Button D4 COMPONENT2 Discrete IR Code

40 󰌝Remote Control Button (Component2 Input Selection)

41 󰌞Remote Control Button D5 RGB-PC Discrete IR Code

43 MENU Remote Control Button (RGB-PC Input Selection)

44 ENTER Remote Control Button CE HDMI1 Discrete IR Code

45 Q.MENU Remote Control Button (HDMI1 Input Selection)

4C - (Dash)/LIST Remote Control Button CC HDMI2 Discrete IR Code

5B EXIT Remote Control Button (HDMI2 Input Selection)

58 WIDGETS Remote Control Button E9 HDMI3 Discrete IR Code

59 NETCAST Remote Control Button (HDMI3 Input Selection)

BLUE/(L/R SELECT)

Remote Control Button DA HDMI4 Discrete IR Code

63 YELLOW Remote Control Button (HDMI4 Input Selection)

71 GREEN Remote Control Button 76 Ratio 4:3 Discrete IR Code

72 RED Remote Control Button (Only 4:3 Mode)

79 RATIO Remote Control Button 77 Ratio 16:9 Discrete IR Code

7E SIMPLINK Remote Control Button (Only 16:9 Mode)

8E 󰌪Remote Control Button AF Ratio Zoom Discrete IR Code

8F 󰌫Remote Control Button (Only Zoom Mode)

ENERGY SAVING

Remote Control Button DC 3D Remote Control Button

AA INFO Remote Control Button

󰋬

Use this feature depending on your models.

182

APPENDIX

EXTERNAL CONTROL THROUGH RS-232C

RS-232C Setup

The RS-232C port allows you connect the RS-232C input jack to an external control device (such as

a computer or an A/V control system) to control the TV’s functions externally.

󰋬

Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and

software.

The instructions below are provided to help with programming software or to test functionality using

telenet software.

Type of Connector; D-Sub 9-Pin Male Communication Parameters

󰋬

Baud rate : 9600 bps (UART)

󰋬

Data length : 8 bits

󰋬

Parity : None

󰋬

Stop bit : 1 bit

󰋬

Communication code : ASCII code

󰋬

Use a crossed (reverse) cable.

NOTE

►This product has command echo back in

the RS-232C Command.

No. Pin Name

No connection

RXD (Receive data)

TXD (Transmit data)

DTR (DTE side ready)

GND

DSR (DCE side ready)

RTS (Ready to send)

CTS (Clear to send)

No Connection

RGB IN (PC)

LAN

WIRELESS

CONTROL

(RGB/DVI)

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO AUDIO

COMPONENT INAV IN 1

AUDIO IN

AUDIO OUT

Y PBPRL R

OPTICAL DIGITAL

ꔡ

RS-232C IN

(CONTROL&

SERVICE)

i.e)

183

APPENDIX

RS-232C Configurations

Use this function to specify a TV ID number.

Refer to ‘Real Data Mapping’.

Set ID

PC TV

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DSR

DSR 6 4 DTR

RTS 7 8 CTS

CTS 8 7 RTS

D-Sub 9 D-Sub 9

PC TV

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DTR

DSR 6 4 DSR

RTS 7 7 RTS

CTS 8 8 CTS

D-Sub 9 D-Sub 9

7-Wire Configuration

(Serial female-female NULL modem cable)

3-Wire Configurations

(Not standard)

Select OPTION.

ENTER

Select Set ID.

ENTER

Choose the desired TV ID number.

The adjustment range of Set ID is

1~ 99.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

󰋬

Real data mapping

0 Step 0

A Step 10 (Set ID 10)

F Step 15 (Set ID 15)

10 Step 16 (Set ID 16)

63 Step 99 (Set ID 99)

64 Step 100

 󰋓󰋚  󰋓󰋚



 





 

 

󰋑

󰋚



 





 

  



184

APPENDIX

Command Reference List

COMMAND1 COMMAND2

DATA

(Hexadecimal)

01. Power k a 00 - 01

02. Input Select x b ► P.185

03. Aspect Ratio k c ► P.185

04. Screen Mute k d 00 - 01

05. Volume Mute k e 00 - 01

06. Volume

Control

k f 00 - 64

07. Contrast k g 00 - 64

08. Brightness k h 00 - 64

09. Color k i 00 - 64

10. Tint k j 00 - 64

11. Sharpness k k 00 - 64

12. OSD Select k l 00 - 01

13. Remote

Control Lock

Mode

k m 00 - 01

14. Treble k r 00 - 64

15. Bass k s 00 - 64

16. Balance k t 00 - 64

17.

Color

Temperature x u 00 - 64

18. ISM Method j p ► P.186

19. Energy Saving j q ► P.186

20. Auto

Configuration j u ► P.186

22.

Channel Add/

Del

m b 00 - 01

23. Key m c ► P.187

24. Backlight g 00 - 64

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the set. (j,

k, m or x)

[Command 2] : Second command to control the

set.

[Set ID] : You can adjust the set ID to choose

desired TV ID number in Setup menu.

Adjustment range is 1-99. When selecting

Set ID ‘0’, every connected the TV is con-

trolled. Set ID is indicated as decimal

(1-99) on menu and as Hexa decimal (0x0

- 0x63) on transmission /receiving proto-

col.

[DATA] : To transmit the command data.

T ransmit the ‘FF’ data to read status of

command.

[Cr] : Carriage Return

ASCII code ‘0x0D’

[ ] : ASCII code ‘space (0x20)’

* In this model, TV will not send the status during the

standby mode.

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

The TV transmits ACK (acknowledgement) based

on this format when receiving normal data. At this

time, if the data is data read mode, it indicates pres-

ent status data. If the data is data write mode, it

returns the data of the PC computer.

* In this model, TV will not send the status during the

standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send

the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will

send the ‘a’, ‘b’.

[OK] : Use the large character.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

The TV transmits ACK (acknowledgement) based

on this format when receiving abnormal data from

non-viable functions or communication errors.

Data1: Illegal Code

Data2: Not supported function

Data3: Wait more time

* In this model, TV will not send the status during the

standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send

the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will

send the ‘a’, ‘b’.

[NG] : Use the large character

COMMAND1 COMMAND2

DATA00

(Hexadecimal)

DATA01

(Hexadecimal)

21.

Channel

Tuning

m a

physical

program

high

major

program

low

DATA02

(Hexadecimal)

DATA03

(Hexadecimal)

DATA04

(Hexadecimal)

DATA05

(Hexadecimal)

major low minor

high minor low attribute

For Plasma TV

For LED LCD TV

185

APPENDIX

01. Power (Command: k a)

To control Power On/Off of the TV.

Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off Data 01: Power On

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit ‘FF’ data

based on this format, Acknowledgement data feed-

back presents status about each function.

* Note: In this model, TV will send the Acknowledge

after power on processing completion.

There might be a time delay between command and

acknowledge.

02. Input Select (Command: x b)

To select input source for TV.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna)

Data 01: DTV (Cable)

Data 10: Analog (Antenna)

Data 11: Analog (Cable)

Data 20: AV1 Data 21: AV 2

Data 40: Component1 Data 41: Component 2

Data 42: Component 3 Data 60: RGB-PC

Data 90: HDMI1 Data 91: HDMI2

Data 92: HDMI3 Data 93: HDMI4

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

* Use the feature depending on your model.

03. Aspect Ratio (Command: k c)

To adjust the screen format.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3 Data 09: Just scan

Data 02: 16:9 Data 10: Cinema Zoom1

Data 04: Zoom

Data 06: Set by program

Data 1F: Cinema Zoom16

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04. Screen Mute (Command: k d)

To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on), Video-out Mute off

Data 01: Screen mute on (Picture off)

Data 10: Video-out Mute on

Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of Video-out Mute on only, TV will display On

Screen Display (OSD). But, in case of screen mute

on, TV will not display On Screen Display (OSD).

05. Volume Mute (Command: k e)

To control volume mute on/off.

You can also adjust mute using the MUTE button on

remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off)

Data 01: Volume mute off (Volume on)

Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

06. Volume Control (Command: k f)

To adjust volume.

You can also adjust volume with the volume buttons

on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

07. Contrast (Command: k g)

To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

08. Brightness (Command: k h)

To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

09. Color (Command: k i)

To adjust screen color.

You can also adjust color in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

10. Tint (Command: k j)

To adjust screen tint.

You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 - Green: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

186

APPENDIX

11. Sharpness (Command: k k)

To adjust screen sharpness.

You can also adjust sharpness in the Picture menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

12. OSD Select (Command: k l)

To select OSD (On Screen Display) on/off.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00: OSD off Data 01: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

13. Remote Control Lock Mode (Command: k m)

To lock the remote control and the front panel con-

trols on the set.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off Data 01: Lock on

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If you’re not using the remote control and front panel

controls on the TV, use this mode. When main power

is on/off, remote control lock is released.

If Key Lock is on in the standby mode, TV will not turn

on by POWER button of remote control and on the TV.

14. Treble (Command: k r)

To adjust treble.

You can also adjust treble in the Audio menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

15. Bass (Command: k s)

To adjust bass.

You can also adjust bass in the Audio menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

16. Balance (Command: k t)

To adjust balance.

You can also adjust balance in the Audio menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

17. Color Temperature (Command: x u)

To adjust color temperature.

You can also adjust color temperature in the Picture

menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Warm: 00 - Cool: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

18. ISM Method (Command: j p) (For Plasma TV)

To avoid having a fixed image remain on screen.

Transmission [ j ][p][ ][Set ID][ ][Data][Cr]

Data 02: Orbiter 04: White Wash

Data 08: Normal 20: Color Wash

Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

19. Energy Saving (Command: j q)

To control the energy saving function.

Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: Off Data 01: Minimum

Data 02: Medium Data 03: Maximum

Data 04: Auto/Intelligent Sensor (depending on model)

Data 05: Screen off

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

20. Auto Configuration (Command: j u)

To adjust picture position and minimize image shak-

ing automatically. Auto configuration only works in

RGB-PC mode.

Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 01: To set

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

21. Channel Tuning (Command: m a)

To tune channel to following physical/major/minor number.

Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor

channel number. The Physical number is the actual

digital channel number, the Major is the number that

the channel should be mapped to, and the Minor is

the sub-channel. Since the ATSC tuner automatically

maps the channel to the Major number, the Physical

number is not required when sending a command.

Data 00: Physical Channel Number

NTSC air: 02 - 45, NTSC cable: 01, 0E - 7D

ATSC air: 01 - 45, ATSC cable: 01 - 87

Data 01 & 02: Major Channel Number

Data 01: High byte Data 02: Low byte

Two bytes are available for the Major and Minor,

normally only the second byte is used.

Data 03 & 04: Minor Channel Number

Not needed for NTSC.

187

APPENDIX

Data5:

The table above lists the binary code which must be

converted to Hexadecimal before sending. For exam-

ple: The binary code to tune the sub source to an

NTSC cable channel is “1000 0001”, which translates

to “81” in Hex.

* 7th bit : For which source do you want to change the

channel.

* 6th bit: Use a two part or one part channel. Most

cases just use 0 since it’s ignored when using

NTSC.

* 5th bit: Use 0 with NTSC since it can only use the

physical channel number. Normally use 1 for ATSC

since most times it doesn’t matter what the physical

number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type.

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35.

Data 00 = Physical of 35 = 23

Data 01 & 02 = No Major = 00 00

Data 03 & 04 = No Minor = 00 00

Data 05 = 0000 0001 in binary = 01

Total = ma 00 23 00 00 00 00 01

2. Tune to the digital local channel 30-3.

Data 00 = Don’t know Physical = 00

Data 01 & 02 = Major is 30 = 00 1E

Data 03 & 04 = Minor is 3 = 00 03

Data 05 = 0010 0010 in binary = 22

Total = ma 00 00 00 1E 00 03 22

Acknowledgement[a][ ][Set ID][ ][OK][Data00]

[Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ]

[NG][Data00][x]

22. Channel Add/Del (Command: m b)

To add and delete the channels.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

23. Key (Command: m c)

To send IR remote control code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

See page 181.

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

24. Backlight (Command: m g) (For LED LCD TV)

To adjust screen backlight.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

Main/Sub

Picture

Two/One Part

Channel

Using Physical

Channel

Reserved

3 2 1 0 Step

0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air

1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cable

x 0 0 1 0 ATSC Air

x 0 0 1 1 ATSC Cable_std

x 0 1 0 0 ATSC Cable_hrc

x 0 1 0 1 ATSC Cable_irc

x 0 1 1 0 ATSC cable_auto

x 0 1 1 1 Reserved

x x x x x ...

x 1 1 1 1 Reserved

188

APPENDIX

OPEN SOURCE LICENSE

Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim cop-

ies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away

your freedom to share and change it. By contrast, the GNU

General Public License is intended to guarantee your free-

dom to share and change free software - to make sure the

software is free for all its users. This General Public License

applies to most of the Free Software Foundation's software

and to any other program whose authors commit to using

it. (Some other free software foundation software is cov-

ered by the GNU Lesser General Public License instead.)

You can apply it to your programs, too.

When we speak of free software, we are referring to free-

dom, not price. Our General Public Licenses are designed

to make sure that you have the freedom to distribute cop-

ies of free software (and charge for this service if you wish),

that you receive source code or can get it if you want it, that

you can change the software or use pieces of it in new free

programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that

forbid anyone to deny you these rights or to ask you to sur-

render the rights. These restrictions translate to certain

responsibilities for you if you distribute copies of the soft-

ware, or if you modify it.

For example, if you distribute copies of such a program,

whether gratis or for a fee, you must give the recipients all

the rights that you have. You must make sure that they, too,

receive or can get the source code. And you must show

them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the

software, and (2) offer you this license which gives you legal

permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to

make certain that everyone understands that there is no

warranty for this free software. If the software is modified

by someone else and passed on, we want its recipients to

know that what they have is not the original, so that any

problems introduced by others will not reflect on the origi-

nal authors' reputations.

Finally, any free program is threatened constantly by soft-

ware patents. We wish to avoid the danger that redistribu-

tors of a free program will individually obtain patent licens-

es, in effect making the program proprietary. To prevent

this, we have made it clear that any patent must be

licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution

and modification follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION

AND MODIFICATION

0. This license applies to any program or other work which

contains a notice placed by the copyright holder saying

it may be distributed under the terms of this General

Public License. The "Program", below, refers to any such

program or work, and a "work based on the Program"

means either the Program or any derivative work under

Program or a portion of it, either verbatim or with modi-

fications and/or translated into another language.

(Hereinafter, translation is included without limitation in

the term "modification".) Each licensee is addressed as

"you".

Activities other than copying, distribution and modifica-

tion are not covered by this license; they are outside its

scope. The act of running the Program is not restricted,

and the output from the program is covered only if its

contents constitute a work based on the program (inde-

pendent of having been made by running the program).

Whether that is true depends on what the program

does.

1. You may copy and distribute verbatim copies of the

program's source code as you receive it, in any medium,

provided that you conspicuously and appropriately pub-

lish on each copy an appropriate copyright notice and

disclaimer of warranty; keep intact all the notices that

refer to this license and to the absence of any warranty;

and give any other recipients of the program a copy of

this license along with the Program.

You may charge a fee for the physical act of transferring

a copy, and you may at your option offer warranty pro-

tection in exchange for a fee.

2. You may modify your copy or copies of the program or

any portion of it, thus forming a work based on the

Program, and copy and distribute such modifications or

work under the terms of section 1 above, provided that

you also meet all of these conditions:

a) You must cause the modified files to carry prominent

notices stating that you changed the files and the

date of any change.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

189

APPENDIX

b) You must cause any work that you distribute or pub-

lish, that in whole or in part contains or is derived

from the Program or any part there of, to be licensed

as a whole at no charge to all third parties under the

terms of this license.

c) If the modified program normally reads commands

interactively when run, you must cause it, when start-

ed running for such interactive use in the most ordi-

nary way, to print or display an announcement includ-

ing an appropriate copyright notice and a notice that

there is no warranty (or else, saying that you provide

a warranty) and that users may redistribute the pro-

gram under these conditions, and telling the user

how to view a copy of this license. (Exception: if the

Program itself is interactive but does not normally

print such an announcement, your work based on the

Program is not required to print an announcement.)

These requirements apply to the modified work as a

whole. If identifiable sections of that work are not

derived from the Program, and can be reasonably con-

sidered independent and separate works in themselves,

then this license, and its terms, do not apply to those

sections when you distribute them as separate works.

But when you distribute the same sections as part of a

whole which is a work based on the Program, the distri-

bution of the whole must be on the terms of this license,

whose permissions for other licensees extend to the

entire whole, and thus to each and every part regardless

of who wrote it.

Thus, it is not the intent of this section to claim rights or

contest your rights to work written entirely by you; rather,

the intent is to exercise the right to control the distribu-

tion of derivative or collective works based on the pro-

gram.

In addition, mere aggregation of another work not

based on the program with the Program (or with a work

based on the program) on a volume of a storage or

distribution medium does not bring the other work

under the scope of this license.

3. You may copy and distribute the program (or a work

based on it, under section 2) in object code or execut-

able form under the terms of sections 1 and 2 above

provided that you also do one of the following:

a) Accompany it with the complete corresponding

machine-readable source code, which must be dis-

tributed under the terms of sections 1 and 2 above

on a medium customarily used for software inter-

change; or,

b) Accompany it with a written offer, valid for at least

three years, to give any third party, for a charge no

more than your cost of physically performing source

distribution, a complete machine-readable copy of

the corresponding source code, to be distributed

under the terms of sections 1 and 2 above on a

medium customarily used for software interchange;

or,

c) Accompany it with the information you received as to

the offer to distribute corresponding source code.

(This alternative is allowed only for noncommercial

distribution and only if you received the program in

object code or executable form with such an offer, in

accord with Subsection b above.)

The source code for a work means the preferred form of

the work for making modifications to it. For an execut-

able work, complete source code means all the source

code for all modules it contains, plus any associated

interface definition files, plus the scripts used to control

compilation and installation of the executable. However,

as a special exception, the source code distributed need

not include anything that is normally distributed (in

either source or binary form) with the major compo-

nents (compiler, kernel, and so on) of the operating

system on which the executable runs, unless that com-

ponent itself accompanies the executable.

If distribution of executable or object code is made by

offering access to copy from a designated place, then

offering equivalent access to copy the source code from

the same place counts as distribution of the source

code, even though third parties are not compelled to

copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the

Program except as expressly provided under this license.

Any attempt otherwise to copy, modify, sublicense or

distribute the Program is void, and will automatically

terminate your rights under this license. However, par-

ties who have received copies, or rights, from you under

this license will not have their licenses terminated so

long as such parties remain in full compliance.

5. You are not required to accept this license, since you

have not signed it. However, nothing else grants you

permission to modify or distribute the Program or its

derivative works. These actions are prohibited by law if

you do not accept this license. Therefore, by modifying

or distributing the program (or any work based on the

program), you indicate your acceptance of this license

to do so, and all its terms and conditions for copying,

distributing or modifying the program or works based

on it.

6. Each time you redistribute the program (or any work

based on the Program), the recipient automatically

receives a license from the original licensor to copy,

distribute or modify the Program subject to these terms

and conditions. You may not impose any further restric-

tions on the recipients' exercise of the rights granted

herein. You are not responsible for enforcing compliance

by third parties to this license.

190

APPENDIX

7. If, as a consequence of a court judgment or allegation

of patent infringement or for any other reason (not lim-

ited to patent issues), conditions are imposed on you

(whether by court order, agreement or otherwise) that

contradict the conditions of this license, they do not

excuse you from the conditions of this license. If you

cannot distribute so as to satisfy simultaneously your

obligations under this license and any other pertinent

obligations, then as a consequence you may not distrib-

ute the program at all. For example, if a patent license

would not permit royalty-free redistribution of the pro-

gram by all those who receive copies directly or indi-

rectly through you, then the only way you could satisfy

both it and this license would be to refrain entirely from

distribution of the program.

If any portion of this section is held invalid or unenforce-

able under any particular circumstance, the balance of

the section is intended to apply and the section as a

whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims or to

contest validity of any such claims; this section has the

sole purpose of protecting the integrity of the free soft-

ware distribution system, which is implemented by pub-

lic license practices. Many people have made generous

contributions to the wide range of software distributed

through that system in reliance on consistent applica-

tion of that system; it is up to the author/donor to

decide if he or she is willing to distribute software

through any other system and a licensee cannot impose

that choice.

This section is intended to make thoroughly clear what

is believed to be a consequence of the rest of this

license.

8. If the distribution and/or use of the program is restrict-

ed in certain countries either by patents or by copy-

righted interfaces, the original copyright holder who

places the program under this license may add an

explicit geographical distribution limitation excluding

those countries, so that distribution is permitted only in

or among countries not thus excluded. In such case, this

license incorporates the limitation as if written in the

body of this license.

9. The Free Software Foundation may publish revised and/

or new versions of the General Public License from time

to time. Such new versions will be similar in spirit to the

present version, but may differ in detail to address new

problems or concerns.

Each version is given a distinguishing version number. If

the program specifies a version number of this license

which applies to it and "any later version", you have the

option of following the terms and conditions either of

that version or of any later version published by the Free

Software Foundation. If the program does not specify a

version number of this license, you may choose any ver-

sion ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the program into

other free programs whose distribution conditions are

different, write to the author to ask for permission. For

software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation; we

sometimes make exceptions for this. Our decision will

be guided by the two goals of preserving the free status

of all derivatives of our free software and of promoting

the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE

PROGRAM, TO THE EXTENT PERMITTED BY

APPLICABLE LAW. EXCEPT WHEN OTHERWISE

STATED IN WRITING THE COPYRIGHT HOLDERS

AND/OR OTHER PARTIES PROVIDE THE PROGRAM

"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. THE ENTIRE RISK AS TO

THE QUALITY AND PERFORMANCE OF THE

PROGRAM IS WITH YOU. SHOULD THE PROGRAM

PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL

NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE

LAW OR AGREED TO IN WRITING WILL ANY

MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM

AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OR INABILITY TO USE

THE PROGRAM (INCLUDING BUT NOT LIMITED TO

LOSS OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY YOU OR

THIRD PARTIES OR A FAILURE OF THE PROGRAM TO

OPERATE WITH ANY OTHER PROGRAMS), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

191

APPENDIX

END OF TERMS AND CONDITIONS

How to apply these terms to your new programs

If you develop a new program, and you want it to be of the

greatest possible use to the public, the best way to achieve

this is to make it free software which everyone can redis-

tribute and change under these terms.

To do so, attach the following notices to the program. It is

safest to attach them to the start of each source file to

most effectively convey the exclusion of warranty; and each

file should have at least the "copyright" line and a pointer

to where the full notice is found.

one line to give the program's name and a brief idea of

what it does.

This program is free software; you can redistribute it and/

or modify it under the terms of the GNU General Public

License as published by the Free Software Foundation;

either version 2 of the license, or (at your option) any later

version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied

warranty of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE. See the GNU General Public

License for more details.

You should have received a copy of the GNU General

Public License along with this program; if not, write to the

Free Software Foundation, Inc., 51 Franklin Street, Fifth

Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic

and paper mail.

If the program is interactive, make it output a short notice

like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY;

for details type ‘show w’. This is free software, and you are

welcome to redistribute it under certain conditions; type

‘show c’ for details.

The hypothetical commands ‘show w’ and ‘show c’ should

show the appropriate parts of the General Public License.

Of course, the commands you use may be called some-

thing other than ‘show w’ and ‘show c’; they could even be

mouse-clicks or menu items-whatever suits your program.

You should also get your employer (if you work as a pro-

grammer) or your school, if any, to sign a “copyright dis-

claimer” for the program, if necessary. Here is a sample;

alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the

program ‘Gnomovision’ (which makes passes at compilers)

written by James Hacker.

signature of Ty Coon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating

your program into proprietary programs. If your program is

a subroutine library, you may consider it more useful to

permit linking proprietary applications with the library. If

this is what you want to do, use the GNU Lesser General

Public License instead of this license.

192

APPENDIX

Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim cop-

ies of this license document, but changing it is not

allowed.

[This is the first released version of the Lesser GPL. It also

counts as the successor of the GNU Library Public

License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away

your freedom to share and change it. By contrast, the GNU

General Public Licenses are intended to guarantee your

freedom to share and change free software - to make sure

the software is free for all its users.

This license, the Lesser General Public License, applies to

some specially designated software packages - typically

libraries - of the Free Software Foundation and other

authors who decide to use it. You can use it too, but we

suggest you first think carefully about whether this license

or the ordinary General Public License is the better strat-

egy to use in any particular case, based on the explana-

tions below.

When we speak of free software, we are referring to free-

dom of use, not price. Our General Public Licenses are

designed to make sure that you have the freedom to dis-

tribute copies of free software (and charge for this service

if you wish); that you receive source code or can get it if you

want it; that you can change the software and use pieces

of it in new free programs; and that you are informed that

you can do these things.

To protect your rights, we need to make restrictions that

forbid distributors to deny you these rights or to ask you to

surrender these rights. These restrictions translate to certain

responsibilities for you if you distribute copies of the library

or if you modify it.

For example, if you distribute copies of the library, whether

gratis or for a fee, you must give the recipients all the rights

that we gave you. You must make sure that they, too,

receive or can get the source code. If you link other code

with the library, you must provide complete object files to

the recipients, so that they can relink them with the library

after making changes to the library and recompiling it. And

you must show them these terms so they know their rights.

We protect your rights with a two-step method: (1) we copy-

right the library, and (2) we offer you this license, which

gives you legal permission to copy, distribute and/or mod-

ify the library.

To protect each distributor, we want to make it very clear

that there is no warranty for the free library. Also, if the

library is modified by someone else and passed on, the

recipients should know that what they have is not the

original version, so that the original author's reputation will

not be affected by problems that might be introduced by

others.

Finally, software patents pose a constant threat to the exis-

tence of any free program. We wish to make sure that a

company cannot effectively restrict the users of a free pro-

gram by obtaining a restrictive license from a patent

holder. Therefore, we insist that any patent license obtained

for a version of the library must be consistent with the full

freedom of use specified in this license.

Most GNU software, including some libraries, is covered by

the ordinary GNU General Public License. This license, the

GNU Lesser General Public License, applies to certain des-

ignated libraries, and is quite different from the ordinary

General Public License. We use this license for certain

libraries in order to permit linking those libraries into non-

free programs.

When a program is linked with a library, whether statically

or using a shared library, the combination of the two is

legally speaking a combined work, a derivative of the origi-

nal library. The ordinary General Public License therefore

permits such linking only if the entire combination fits its

criteria of freedom. The Lesser General Public License

permits more lax criteria for linking other code with the

library.

We call this license the "Lesser" General Public License

because it does Less to protect the user's freedom than

the ordinary General Public License. It also provides other

free software developers Less of an advantage over com-

peting non-free programs. These disadvantages are the

reason we use the ordinary General Public License for

many libraries. However, the Lesser license provides advan-

tages in certain special circumstances.

For example, on rare occasions, there may be a special

need to encourage the widest possible use of a certain

library, so that it becomes a de-facto standard. To achieve

this, non-free programs must be allowed to use the library.

A more frequent case is that a free library does the same

job as widely used non-free libraries. In this case, there is

little to gain by limiting the free library to free software only,

so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-

free programs enables a greater number of people to use

a large body of free software. For example, permission to

use the GNU C Library in non-free programs enables many

more people to use the whole GNU operating system, as

well as its variant, the GNU/Linux operating system.

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

193

APPENDIX

Although the Lesser General Public License is Less protec-

tive of the users' freedom, it does ensure that the user of a

program that is linked with the Library has the freedom and

the wherewithal to run that program using a modified ver-

sion of the Library.

The precise terms and conditions for copying, distribution

and modification follow. Pay close attention to the differ-

ence between a "work based on the library" and a "work

that uses the library". The former contains code derived

from the library, whereas the latter must be combined with

the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION

AND MODIFICATION

0. This license agreement applies to any software library or

other program which contains a notice placed by the

be distributed under the terms of this Lesser General

Public License (also called “this license”). Each license

is addressed as "you".

A “library” means a collection of software functions

and/or data prepared so as to be conveniently linked

with application programs (which use some of those

functions and data) to form executables.

The “Library”, below, refers to any such software library or

work which has been distributed under these terms. A

“work based on the Library” means either the Library or

any derivative work under copyright law: that is to say, a

work containing the library or a portion of it, either verba-

tim or with modifications and/or translated straightfor-

wardly into another language. (Hereinafter, translation is

included without limitation in the term “modification”.)

“Source code” for a work means the preferred form of

the work for making modifications to it. For a library,

complete source code means all the source code for all

modules it contains, plus any associated interface defi-

nition files, plus the scripts used to control compilation

and installation of the library.

Activities other than copying, distribution and modifica-

tion are not covered by this license; they are outside its

scope. The act of running a program using the Library

is not restricted, and output from such a program is

covered only if its contents constitute a work based on

the library (independent of the use of the Library in a

tool for writing it). Whether that is true depends on what

the library does and what the program that uses the

library does.

1. You may copy and distribute verbatim copies of the

library's complete source code as you receive it, in any

medium, provided that you conspicuously and appropri-

ately publish on each copy an appropriate copyright

notice and disclaimer of warranty; keep intact all the

notices that refer to this license and to the absence of

any warranty; and distribute a copy of this license along

with the Library.

You may charge a fee for the physical act of transferring

a copy, and you may at your option offer warranty pro-

tection in exchange for a fee.

2. You may modify your copy or copies of the Library or

any portion of it, thus forming a work based on the

Library, and copy and distribute such modifications or

work under the terms of section 1 above, provided that

you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent

notices stating that you changed the files and the

date of any change.

c) You must cause the whole of the work to be licensed

at no charge to all third parties under the terms of

this license.

d) If a facility in the modified Library refers to a function

or a table of data to be supplied by an application

program that uses the facility, other than as an argu-

ment passed when the facility is invoked, then you

must make a good faith effort to ensure that, in the

event an application does not supply such function or

table, the facility still operates, and performs what-

ever part of its purpose remains meaningful.

(For example, a function in a library to compute square

roots has a purpose that is entirely well-defined indepen-

dent of the application. Therefore, Subsection 2d

requires that any application-supplied function or table

used by this function must be optional: if the application

does not supply it, the square root function must still

compute square roots.)

These requirements apply to the modified work as a

whole. If identifiable sections of that work are not

derived from the library, and can be reasonably consid-

ered independent and separate works in themselves,

then this license, and its terms, do not apply to those

sections when you distribute them as separate works.

But when you distribute the same sections as part of a

whole which is a work based on the library, the distribu-

tion of the whole must be on the terms of this license,

whose permissions for other licenses extend to the

entire whole, and thus to each and every part regardless

of who wrote it.

Thus, it is not the intent of this section to claim rights or

contest your rights to work written entirely by you; rather,

the intent is to exercise the right to control the distribu-

tion of derivative or collective works based on the library.

In addition, mere aggregation of another work not based

on the library with the library (or with a work based on

the library) on a volume of a storage or distribution

medium does not bring the other work under the scope

of this license.

194

APPENDIX

3. You may opt to apply the terms of the ordinary GNU

General Public License instead of this License to a given

copy of the Library. To do this, you must alter all the

notices that refer to this License, so that they refer to the

ordinary GNU General Public License, version 2, instead

of to this License. (If a newer version than version 2 of

the ordinary GNU General Public License has appeared,

then you can specify that version instead if you wish.) Do

not make any other change in these notices.

Once this change is made in a given copy, it is irrevers-

ible for that copy, so the ordinary GNU General Public

License applies to all subsequent copies and derivative

works made from that copy.

This option is useful when you wish to copy part of the

code of the library into a program that is not a library.

4. You may copy and distribute the library (or a portion or

derivative of it, under Section 2) in object code or exe-

cutable form under the terms of Sections 1 and 2 above

provided that you accompany it with the complete cor-

responding machine-readable source code, which must

be distributed under the terms of sections 1 and 2

above on a medium customarily used for software inter-

change.

If distribution of object code is made by offering access

to copy from a designated place, then offering equiva-

lent access to copy the source code from the same

place satisfies the requirement to distribute the source

code, even though third parties are not compelled to

copy the source along with the object code.

5. A program that contains no derivative of any portion of

the Library, but is designed to work with the Library by

being compiled or linked with it, is called a “work that

uses the Library”. Such a work, in isolation, is not a

derivative work of the Library, and therefore falls outside

the scope of this license.

However, linking a “work that uses the library” with the

Library creates an executable that is a derivative of the

Library (because it contains portions of the library),

rather than a “work that uses the library”. The executable

is therefore covered by this license. Section 6 states

terms for distribution of such executable.

When a “work that uses the library” uses material from

a header file that is part of the library, the object code

for the work may be a derivative work of the library even

though the source code is not.

Whether this is true is especially significant if the work

can be linked without the library, or if the work is itself a

library. The threshold for this to be true is not precisely

defined by law.

If such an object file uses only numerical parameters,

data structure layouts and accessories, and small mac-

ros and small inline functions (ten lines or less in

length), then the use of the object file is unrestricted,

regardless of whether it is legally a derivative work.

(Executable containing this object code plus portions of

the library will still fall under Section 6.)

Otherwise, if the work is a derivative of the library, you

may distribute the object code for the work under the

terms of Section 6. Any executable containing that work

also fall under Section 6, whether or not they are linked

directly with the library itself.

6. As an exception to the sections above, you may also

combine or link a "work that uses the library" with the

library to produce a work containing portions of the

library, and distribute that work under terms of your

choice, provided that the terms permit modification of

the work for the customer's own use and reverse engi-

neering for debugging such modifications.

You must give prominent notice with each copy of the

work that the library is used in it and that the Library and

its use are covered by this license. You must supply a

copy of this license. If the work during execution dis-

plays copyright notices, you must include the copyright

notice for the library among them, as well as a reference

directing the user to the copy of this license. Also, you

must do one of these things:

a) Accompany the work with the complete correspond-

ing machine-readable source code for the library

including whatever changes were used in the work

(which must be distributed under Sections 1 and 2

above); and, if the work is an executable linked with

the Library, with the complete machine-readable

“work that uses the Library”, as object code and/or

source code, so that the user can modify the library

and then relink to produce a modified executable

containing the modified library. (It is understood that

the user who changes the contents of definitions files

in the library will not necessarily be able to recompile

the application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking

with the library. A suitable mechanism is one that (1)

uses at run time a copy of the library already present

on the user’s computer system, rather than copying

library functions into the executable, and (2) will oper-

ate properly with a modified version of the library, if the

user installs one, as long as the modified version is

interface-compatible with the version that the work

was made with.

c) Accompany the work with a written offer, valid for at

least three years, to give the same user the materials

specified in Subsection 6, above, for a charge no

more than the cost of performing this distribution.

d) If distribution of the work is made by offering access

to copy from a designated place, offer equivalent

access to copy the above specified materials from

the same place.

e) Verify that the user has already received a copy of

these materials or that you have already sent this user

a copy.

195

APPENDIX

For an executable, the required form of the "work that

uses the library" must include any data and utility pro-

grams needed for reproducing the executable from it.

However, as a special exception, the materials to be

distributed need not include anything that is normally

distributed (in either source or binary form) with the

major components (compiler, kernel, and so on) of the

operating system on which the executable runs, unless

that component itself accompanies the executable.

It may happen that this requirement contradicts the

license restrictions of other proprietary libraries that do

not normally accompany the operating system. Such a

contradiction means you cannot use both them and the

library together in an executable that you distribute.

7. You may place library facilities that are a work based on

the library side-by-side in a single library together with

other library facilities not covered by this license, and

distribute such a combined library, provided that the

separate distribution of the work based on the Library

and of the other library facilities is otherwise permitted,

and provided that you do these two things:

a) Accompany the combined library with a copy of the

same work based on the Library, uncombined with

any other library facilities. This must be distributed

under the terms of the sections above.

b) Give prominent notice with the combined library of

the fact that part of it is a work based on the library,

and explaining where to find the accompanying

uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or dis-

tribute the library except as expressly provided under

this license. Any attempt otherwise to copy, modify,

sublicense, link with, or distribute the library is void, and

will automatically terminate your rights under this

license. However, parties who have received copies, or

rights, from you under this license will not have their

licenses terminated so long as such parties remain in

full compliance.

9. You are not required to accept this license, since you

have not signed it. However, nothing else grants you

permission to modify or distribute the library or its

derivative works. These actions are prohibited by law if

you do not accept this license. Therefore, by modifying

or distributing the library (or any work based on the

library), you indicate your acceptance of this license to do

so, and all its terms and conditions for copying, distribut-

ing or modifying the library or works based on it.

10. Each time you redistribute the library (or any work based

on the Library), the recipient automatically receives a

license from the original licensor to copy, distribute, link

with or modify the library subject to these terms and

conditions. You may not impose any further restrictions

on the recipients' exercise of the rights granted herein.

You are not responsible for enforcing compliance by

third parties with this license.

11. If, as a consequence of a court judgment or allegation

of patent infringement or for any other reason (not lim-

ited to patent issues), conditions are imposed on you

(whether by court order, agreement or otherwise) that

contradict the conditions of this license, they do not

excuse you from the conditions of this license. If you

cannot distribute so as to satisfy simultaneously your

obligations under this license and any other pertinent

obligations, then as a consequence you may not distrib-

ute the library at all. For example, if a patent license

would not permit royalty-free redistribution of the library

by all those who receive copies directly or indirectly

through you, then the only way you could satisfy both it

and this license would be to refrain entirely from distri-

bution of the library.

If any portion of this section is held invalid or unenforce-

able under any particular circumstance, the balance of

the section is intended to apply, and the section as a

whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims or to

contest validity of any such claims; this section has the

sole purpose of protecting the integrity of the free soft-

ware distribution system which is implemented by pub-

lic license practices. Many people have made generous

contributions to the wide range of software distributed

through that system in reliance on consistent applica-

tion of that system; it is up to the author/donor to

decide if he or she is willing to distribute software

through any other system and a license cannot impose

that choice.

This section is intended to make thoroughly clear what

is believed to be a consequence of the rest of this

license.

12. If the distribution and/or use of the library is restricted in

certain countries either by patents or by copyrighted

interfaces, the original copyright holder who places the

library under this license may add an explicit geograph-

ical distribution limitation excluding those countries, so

that distribution is permitted only in or among countries

not thus excluded. In such case, this license incorporates

the limitation as if written in the body of this license.

13. The Free Software Foundation may publish revised and/

or new versions of the Lesser General Public License

from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to

address new problems or concerns.

Each version is given a distinguishing version number. If

the library specifies a version number of this license

which applies to it and “any later version”, you have the

option of following the terms and conditions either of

that version or of any later version published by the Free

Software Foundation.

196

APPENDIX

If the library does not specify a license version number,

you may choose any version ever published by the Free

Software Foundation.

14. If you wish to incorporate parts of the library into other

free programs whose distribution conditions are incom-

patible with these, write to the author to ask for permis-

sion. For software which is copyrighted by the Free

Software Foundation, write to the Free Software

Foundation; we sometimes make exceptions for this.

Our decision will be guided by the two goals of preserv-

ing the free status of all derivatives of our free software

and of promoting the sharing and reuse of software

generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE

LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE

LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING

THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES

PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. THE ENTIRE RISK

AS TO THE QUALITY AND PERFORMANCE OF THE

LIBRARY IS WITH YOU. SHOULD THE LIBRARY

PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL

NECESSARY SERVICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE

LAW OR AGREED TO IN WRITING WILL ANY

MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY

AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OR INABILITY TO USE

THE LIBRARY (INCLUDING BUT NOT LIMITED TO

LOSS OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY YOU OR

THIRD PARTIES OR A FAILURE OF THE LIBRARY TO

OPERATE WITH ANY OTHER SOFTWARE), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to apply these terms to your new libraries

If you develop a new library, and you want it to be of the

greatest possible use to the public, we recommend making

it free software that everyone can redistribute and change.

You can do so by permitting redistribution under these

terms (or, alternatively, under the terms of the ordinary

General Public License).

To apply these terms, attach the following notices to the

library. It is safest to attach them to the start of each

source file to most effectively convey the exclusion of war-

ranty; and each file should have at least the “copyright” line

and a pointer to where the full notice is found.

one line to give the library's name and a brief idea of what

it does.

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General

Public License as published by the Free Software

Foundation; either version 2.1 of the license, or (at your

option) any later version.

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied

warranty of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE. See the GNU Lesser General

Public License for more details.

You should have received a copy of the GNU Lesser

General Public License along with this library; if not, write to

the Free Software Foundation, Inc., 51 Franklin Street, Fifth

Floor, Boston, MA 02110-1301 USA

Also add information on how to contact you by electronic

and paper mail.

You should also get your employer (if you work as a pro-

grammer) or your school, if any, to sign a “copyright dis-

claimer” for the library, if necessary. Here is a sample; alter

the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the

library ‘Frob’ (a library for tweaking knobs) written by James

Random Hacker.

signature of Ty Coon, 1 April 1990

Ty Coon, President of Vice

197

APPENDIX

1.Definitions.

1.0.1. “Commercial use” means distribution or otherwise

making the covered code available to a third party.

1.1. “Contributor” means each entity that creates or con-

tributes to the creation of modifications.

1.2. “Contributor version” means the combination of the

original code, prior modifications used by a contribu-

tor, and the modifications made by that particular

contributor.

1.3. “Covered code” means the original code or modifi-

cations or the combination of the original code and

modifications, in each case including portions there-

of.

1.4. “Electronic distribution mechanism” means a mech-

anism generally accepted in the software develop-

ment community for the electronic transfer of data.

1.5. “Executable” means covered code in any form other

than source code.

1.6. “Initial developer” means the individual or entity

identified as the initial Developer in the Source Code

notice required by exhibit A.

1.7. “Larger work” means a work which combines covered

code or portions thereof with code not governed by

the terms of this License.

1.8. “License” means this document.

1.8.1. “Licensable” means having the right to grant, to the

maximum extent possible, whether at the time of the

initial grant or subsequently acquired, any and all of

the rights conveyed herein.

1.9. “Modifications” means any addition to or deletion

from the substance or structure of either the original

code or any previous modifications. When covered

code is released as a series of files, a modification is:

A. Any addition to or deletion from the contents of a

file containing original code or previous modifica-

tions.

B. Any new file that contains any part of the original

code or previous modifications.

1.10. “Original code” means source code of computer

software code which is described in the source code

notice required by exhibit as original code, and

which, at the time of its release under this license is

not already covered code governed by this license.

1.10.1.

“Patent claims” means any patent claim(s), now

owned or hereafter acquired, including without limi-

tation, method, process, and apparatus claims, in any

patent licensable by grantor.

1.11. “Source code” means the preferred form of the cov-

ered code for making modifications to it, including all

modules it contains, plus any associated interface

definition files, scripts used to control compilation

and installation of an executable, or source code dif-

ferential comparisons against either the original code

or another well known, available covered code of the

contributor's choice. The source code can be in a

compressed or archival form, provided the appropri-

ate decompression or de-archiving software is wide-

ly available for no charge.

1.12. “You” (or “Your”) means an individual or a legal

entity exercising rights under, and complying with all

of the terms of, this license or a future version of this

license issued under section 6.1.

For legal entities, “You” includes any entity which

controls, is controlled by, or is under common control

with You. For purposes of this definition, “control”

means (a) the power, direct or indirect, to cause the

direction or management of such entity, whether by

contract or otherwise, or (b) ownership of more than

fifty percent (50%) of the outstanding shares or ben-

eficial ownership of such entity.

2. Source Code License.

2.1. The initial developer grant.

The initial developer hereby grants You a world-wide,

royalty-free, non-exclusive license, subject to third

party intellectual property claims:

a) under intellectual property rights (other than pat-

ent or trademark) licensable by initial developer to

use, reproduce, modify, display, perform, subli-

cense and distribute the original code (or portions

thereof) with or without modifications, and/or as

part of a larger work; and

(b) under patents claims infringed by the making,

using or selling of original code, to make, have

made, use, practice, sell, and offer for sale, and/

or otherwise dispose of the original code (or por-

tions there of).

MOZILLA PUBLIC LICENSE

Version 1.1

---------------

198

APPENDIX

are effective on the date Initial developer first

distributes original code under the terms of this

license.

(d) Notwithstanding section 2.1(b) above, no patent

license is granted: 1) for code that You delete

from the original Code; 2) separate from the

original code; or 3) for infringements caused by:

i) the modification of the original code or ii) the

combination of the original code with other soft-

ware or devices.

2.2. Contributor Grant.

Subject to third party intellectual property claims,

each contributor hereby grants You a world-wide,

royalty-free, non-exclusive license

(a) under intellectual property rights (other than pat-

ent or trademark) licensable by contributor, to

use, reproduce, modify, display, perform, subli-

cense and distribute the modifications created by

such contributor (or portions thereof) either on

an unmodified basis, with other modifications, as

covered code and/or as part of a larger work; and

(b) under patent claims infringed by the making,

using, or selling of modifications made by that

contributor either alone and/or in combination

with its contributor version (or portions of such

combination), to make, use, sell, offer for sale,

have made, and/or otherwise dispose of: 1) modi-

fications made by that contributor (or portions

thereof); and 2) the combination of modifications

made by that contributor with its contributor ver-

sion (or portions of such combination).

are effective on the date contributor first makes

commercial use of the covered code.

(d) Notwithstanding section 2.2(b) above, no patent

license is granted: 1) for any code that contributor

has deleted from the contributor version; 2)

separate from the contributor version; 3) for

infringements caused by: i) third party modifica-

tions of contributor version or ii) the combination

of modifications made by that contributor with

other software (except as part of the contributor

version) or other devices; or 4) under patent

claims infringed by covered code in the absence

of modifications made by that contributor.

3. Distribution Obligations.

3.1. Application of license.

The modifications which You create or to which you

contribute are governed by the terms of this license,

including without limitation section 2.2. The source

code version of covered code may be distributed

only under the terms of this license or a future ver-

sion of this license released under section 6.1, and

you must include a copy of this license with every

copy of the source code you distribute. You may not

offer or impose any terms on any source code ver-

sion that alters or restricts the applicable version of

this license or the recipients' rights hereunder.

However, you may include an additional document

offering the additional rights described in section

3.5.

3.2. Availability of source code.

Any modification which you create or to which you

contribute must be made available in source code

form under the terms of this license either on the

same media as an executable version or via an

accepted electronic distribution mechanism to any-

one to whom you made an executable version avail-

able; and if made available via electronic distribution

mechanism, must remain available for at least twelve

(12) months after the date it initially became avail-

able, or at least six (6) months after a subsequent

version of that particular modification has been

made available to such recipients. You are responsi-

ble for ensuring that the source code version remains

available even if the electronic distribution mecha-

nism is maintained by a third party.

3.3. Description of modifications.

You must cause all covered code to which you contrib-

ute to contain a file documenting the changes You

made to create that covered code and the date of any

change. You must include a prominent statement that

the modification is derived, directly or indirectly, from

original code provided by the initial developer and

including the name of the initial developer in (a) the

source code, and (b) in any notice in an executable

version or related documentation in which you describe

the origin or ownership of the covered code.

3.4. Intellectual property matters

(a) Third party claims.

If contributor has knowledge that a license under a

third party's intellectual property rights is required to

exercise the rights granted by such contributor under

sections 2.1 or 2.2, contributor must include a text file

with the source code distribution titled "LEGAL"

which describes the claim and the party making the

claim in sufficient detail that a recipient will know

whom to contact. If contributor obtains such knowl-

edge after the modification is made available as

described in section 3.2, contributor shall promptly

modify the LEGAL file in all copies contributor makes

available thereafter and shall take other steps (such

as notifying appropriate mailing lists or newsgroups)

reasonably calculated to inform those who received

the covered code that new knowledge has been

obtained.

(b) Contributor APIs.

If contributor's modifications include an application

programming interface and contributor has knowl-

edge of patent licenses which are reasonably neces-

sary to implement that API, contributor must also

include this information in the LEGAL file.

199

APPENDIX

contributor represents that, except as disclosed pur-

suant to section 3.4(a) above, contributor believes that

contributor's modifications are contributor's original

creation(s) and/or contributor has sufficient rights to

grant the rights conveyed by this license.

3.5. Required notices.

You must duplicate the notice in exhibit A in each file

of the source code. If it is not possible to put such

notice in a particular source code file due to its struc-

ture, then You must include such notice in a location

(such as a relevant directory) where a user would be

likely to look for such a notice. If You created one or

more modification(s), you may add your name as a

contributor to the notice described in exhibit A. you

must also duplicate this license in any documenta-

tion for the source code where You describe recipi-

ents' rights or ownership rights relating to covered

code. You may choose to offer, and to charge a fee

for, warranty, support, indemnity or liability obliga-

tions to one or more recipients of covered code.

However, you may do so only on your own behalf, and

not on behalf of the Initial developer or any contribu-

tor. You must make it absolutely clear than any such

warranty, support, indemnity or liability obligation is

offered by you alone, and You hereby agree to

indemnify the Initial developer and every contributor

for any liability incurred by the Initial developer or

such contributor as a result of warranty, support,

indemnity or liability terms you offer.

3.6. Distribution of executable versions.

You may distribute covered code in executable form

only if the requirements of section 3.1-3.5 have been

met for that covered code, and if you include a notice

stating that the source code version of the covered

code is available under the terms of this license,

including a description of how and where you have

fulfilled the obligations of section 3.2. The notice

must be conspicuously included in any notice in an

executable version, related documentation or collat-

eral in which you describe recipients' rights relating

to the covered code. You may distribute the execut-

able version of covered code or ownership rights

under a license of your choice, which may contain

terms different from this license, provided that you

are in compliance with the terms of this license and

that the license for the executable version does not

attempt to limit or alter the recipient's rights in the

source code version from the rights set forth in this

license. If you distribute the executable version under

a different license you must make it absolutely clear

that any terms which differ from this license are

offered by you alone, not by the Initial developer or

any contributor. You hereby agree to indemnify the

initial developer and every contributor for any liability

incurred by the initial developer or such contributor

as a result of any such terms You offer.

3.7. Larger works.

You may create a larger work by combining covered

code with other code not governed by the terms of

this license and distribute the larger work as a single

product. In such a case, you must make sure the

requirements of this license are fulfilled for the cov-

ered code.

4. Inability to comply due to statute or regulation.

If it is impossible for you to comply with any of the

terms of this license with respect to some or all of

the covered code due to statute, judicial order, or

regulation then you must: (a) comply with the terms

of this license to the maximum extent possible; and

(b) describe the limitations and the code they affect.

Such description must be included in the LEGAL file

described in section 3.4 and must be included with

all distributions of the source code. Except to the

extent prohibited by statute or regulation, such

description must be sufficiently detailed for a recipi-

ent of ordinary skill to be able to understand it.

5. Application of this license.

This license applies to code to which the initial devel-

oper has attached the notice in exhibit A and to

related covered code.

6. Versions of the license.

6.1. New versions.

Netscape communications corporation (“Netscape”)

may publish revised and/or new versions of the

license from time to time. Each version will be given

a distinguishing version number.

6.2. Effect of new versions.

Once covered code has been published under a

particular version of the license, you may always con-

tinue to use it under the terms of that version. You

may also choose to use such covered code under

the terms of any subsequent version of the license

published by netscape. No one other than netscape

has the right to modify the terms applicable to cov-

ered code created under this license.

6.3. Derivative works.

If You create or use a modified version of this license

(which you may only do in order to apply it to code

which is not already covered code governed by this

license), You must (a) rename Your license so that the

phrases "Mozilla", "MOZILLAPL", "MOZPL",

"Netscape", "MPL", "NPL" or any confusingly similar

phrase do not appear in your license (except to note

that your license differs from this license) and (b)

otherwise make it clear that Your version of the

license contains terms which differ from the Mozilla

Public license and netscape Public License. (Filling in

the name of the initial developer, original code or

contributor in the notice described in exhibit A shall

not of themselves be deemed to be modifications of

this license.)

200

APPENDIX

7. DISCLAIMER OF WARRANTY.

COVERED CODE IS PROVIDED UNDER THIS

LICENSE ON AN “AS IS” BASIS, WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED

OR IMPLIED, INCLUDING, WITHOUT LIMITATION,

WARRANTIES THAT THE COVERED CODE IS FREE

OF DEFECTS, MERCHANTABLE, FIT FOR A

PARTICULAR PURPOSE OR NON-INFRINGING.

THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE COVERED CODE IS WITH

YOU. SHOULD ANY COVERED CODE PROVE

DEFECTIVE IN ANY RESPECT, YOU (NOT THE

INITIAL DEVELOPER OR ANY OTHER

CONTRIBUTOR) ASSUME THE COST OF ANY

NECESSARY SERVICING, REPAIR OR CORRECTION.

THIS DISCLAIMER OF WARRANTY CONSTITUTES

AN ESSENTIAL PART OF THIS LICENSE. NO USE

OF ANY COVERED CODE IS AUTHORIZED

HEREUNDER EXCEPT UNDER THIS DISCLAIMER.

8. TERMINATION.

8.1. This license and the rights granted hereunder will

terminate automatically if you fail to comply with

terms herein and fail to cure such breach within 30

days of becoming aware of the breach. All subli-

censes to the covered code which are properly

granted shall survive any termination of this license.

Provisions which, by their nature, must remain in

effect beyond the termination of this license shall

survive.

8.2. If you initiate litigation by asserting a patent infringe-

ment claim (excluding declatory judgment actions)

against initial developer or a contributor (the initial

developer or contributor against whom you file such

action is referred to as “Participant”) alleging that:

(a) such participant's contributor version directly or

indirectly infringes any patent, then any and all

rights granted by such participant to you under

sections 2.1 and/or 2.2 of this license shall, upon

60 days notice from Participant terminate pro-

spectively, unless if within 60 days after receipt of

notice you either: (i) agree in writing to pay par-

ticipant a mutually agreeable reasonable royalty for

your past and future use of modifications made

by such participant, or (ii) withdraw your litigation

claim with respect to the contributor version

against such participant. If within 60 days of notice,

a reasonable royalty and payment arrangement

are not mutually agreed upon in writing by the

parties or the litigation claim is not withdrawn, the

rights granted by participant to you under sec-

tions 2.1 and/or 2.2 automatically terminate at the

expiration of the 60 day notice period specified

above.

(b) any software, hardware, or device, other than such

participant's contributor Version, directly or indi-

rectly infringes any patent, then any rights grant-

ed to You by such participant under sections

2.1(b) and 2.2(b) are revoked effective as of the

date you first made, used, sold, distributed, or

had made, modifications made by that partici-

pant.

8.3. If you assert a patent infringement claim against

participant alleging that such participant's contribu-

tor version directly or indirectly infringes any patent

where such claim is resolved (such as by license or

settlement) prior to the initiation of patent infringe-

ment litigation, then the reasonable value of the

licenses granted by such participant under sections

2.1 or 2.2 shall be taken into account in determining

the amount or value of any payment or license.

8.4. In the event of termination under sections 8.1 or 8.2

above, all end user license agreements (excluding dis-

tributors and resellers) which have been validly

granted by you or any distributor hereunder prior to

termination shall survive termination.

9. LIMITATION OF LIABILITY.

UNDER NO CIRCUMSTANCES AND UNDER NO

LEGAL THEORY, WHETHER TORT (INCLUDING

NEGLIGENCE), CONTRACT, OR OTHERWISE,

SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER

CONTRIBUTOR, OR ANY DISTRIBUTOR OF

COVERED CODE,OR ANY SUPPLIER OF ANY OF

SUCH PARTIES, BE LIABLE TO ANY PERSON FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES OF ANY CHARACTER

INCLUDING, WITHOUT LIMITATION, DAMAGES

FOR LOSS OF GOODWILL, WORK STOPPAGE,

COMPUTER FAILURE OR MALFUNCTION, OR ANY

AND ALL OTHER COMMERCIAL DAMAGES OR

LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN

INFORMED OF THE POSSIBILITY OF SUCH

DAMAGES. THIS LIMITATION OF LIABILITY SHALL

NOT APPLY TO LIABILITY FOR DEATH OR

PERSONAL INJURY RESULTING FROM SUCH

PARTY'S NEGLIGENCE TO THE EXTENT

APPLICABLE LAW PROHIBITS SUCH LIMITATION.

SOME JURISDICTIONS DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION

AND LIMITATION MAY NOT APPLY TO YOU.

10. U.S. GOVERNMENT END USERS.

The covered code is a "commercial item," as that

term is defined in 48 C.F.R. 2.101 (Oct. 1995), con-

sisting of "commercial computer software" and "com-

mercial computer software documentation," as such

terms are used in 48 C.F.R. 12.212 (Sept. 1995).

Consistent with 48 C.F.R. 12.212 and 48 C.F.R.

227.7202-1 through 227.7202-4 (June 1995), all

U.S. Government end users acquire covered code

with only those rights set forth herein.

201

APPENDIX

11. MISCELLANEOUS.

This license represents the complete agreement con-

cerning subject matter hereof. If any provision of this

license is held to be unenforceable, such provision

shall be reformed only to the extent necessary to

make it enforceable. This License shall be governed

by California law provisions (except to the extent

applicable law, if any, provides otherwise), excluding

its conflict-of-law provisions. With respect to dis-

putes in which at least one party is a citizen of, or an

entity chartered or registered to do business in the

united states of america, any litigation relating to this

License shall be subject to the jurisdiction of the

federal courts of the northern district of california,

with venue lying in santa clara county, california, with

the losing party responsible for costs, including with-

out limitation, court costs and reasonable attorneys'

fees and expenses. The application of the united

nations convention on contracts for the International

sale of goods is expressly excluded. Any law or regu-

lation which provides that the language of a contract

shall be construed against the drafter shall not apply

to this license.

12. RESPONSIBILITY FOR CLAIMS.

As between initial developer and the contributors,

each party is responsible for claims and damages

arising, directly or indirectly, out of its utilization of

rights under this license and you agree to work with

initial developer and contributors to distribute such

responsibility on an equitable basis. Nothing herein is

intended or shall be deemed to constitute any

admission of liability.

13. MULTIPLE-LICENSED CODE.

Initial developer may designate portions of the cov-

ered code as "Multiple-Licensed". "Multiple-

Licensed" means that the initial developer permits

you to utilize portions of the covered code under your

choice of the NPL or the alternative licenses, if any,

specified by the initial developer in the file described

in exhibit A.

EXHIBIT A -Mozilla Public License.

The contents of this file are subject to the Mozilla Public

License Version 1.1 (the “license”); you may not use this file

except in compliance with the License. You may obtain a

copy of the license at http://www.mozilla.org/MPL/

Software distributed under the license is distributed on an

"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either

express or implied. See the license for the specific lan-

guage governing rights and limitations under the License.

The Original Code is ______________________________________

The Initial Developer of the Original Code

is___________________.

Portions created by ______________________ are Copyright

Contributor(s): ______________________________________.

Alternatively, the contents of this file may be used under

the terms of the _____ license (the "[___] License"), in

which case the provisions of [______] license are applicable

instead of those above. If you wish to allow use of your

version of this file only under the terms of the [____] license

and not to allow others to use your version of this file under

the MPL, indicate your decision by deleting the provisions

above and replace them with the notice and other provi-

sions required by the [___] license. If you do not delete the

provisions above, a recipient may use your version of this file

under either the MPL or the [___] license."

NOTE: The text of this exhibit A may differ slightly from the

text of the notices in the source code files of the original

code. You should use the text of this exhibit A rather than

the text found in the original code/source code for Your

modifications.

OWNER’S MANUAL

LED LCD TV / PLASMA TV

Please read this manual carefully before operating

your set and retain it for future reference.

P/NO : SAC34134205 (1004-REV01) www.lg.com

The model and serial number of the TV is located

on the back and one side of the TV.

Record it below should you ever need service.

MODEL

SERIAL

LED LCD TV MODELS

47LX9500

55LX9500

47LEX8

55LEX8

60LEX9

72LEX9

PLASMA TV MODELS

50PK950

60PK950

NETCAST

YAHOO! TV WIDGETS

You can enjoy the best of the Internet in perfect harmony with the simplicity and reliability of your TV.

Yahoo! TV Widgets provide an integrated Internet TV experience powered by the Yahoo!® Connected

TV platform. You can monitor financial stocks, share photos with friends and family, track news and

weather and much more, all through the Yahoo! TV Widgets service on your TV.

Note that these services are provided by the Content Provider, using Yahoo! Widget Platform provided

by Yahoo!. All the services are dependent on appropriate Content Provider. Please check about page

of each widgets for Terms of service.

Note If you have any question or need any help for the widgets which is not covered in this manual,

please contact web site for further help which shall be listed in about page of each widget, or Yahoo!

help site http://conntectedtv.yahoo.com/help.

Using the Remote Control

When Yahoo! TV Widgets are displayed, you can use the following remote control buttons.

Getting Started Out of the Box

Once your television is powered up and your network is operational, the Yahoo! TV Widgets software

guides you through its step-by-step on-screen wizard the first time you startup. These setup steps are

designed to provide you with the information and settings you’ll need to start using the Yahoo! TV

Widgets user interface.

WIDGETS

Begin using Yahoo! TV Widgets. Press

it again to go back to just watching TV.

ENTER

Select the focused item.

Highlight and focus on buttons in the

Yahoo! TV Widgets user interface.

Go to the TV Menu.

Move the focus selection up. RED Close the open widget and return to

watching TV.

Move the focus selection down. GREEN Change the open widget’s settings.

Move the focus selection to the left.

YELLOW

Add, move, or delete your snippets.

Move the focus selection to the right. BLUE Resize the video to fit onscreen, or to

make it fullscreen.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

What is a TV Widget?

A TV Widget is an Internet application designed to run on your TV.

What is a Snippet?

A Snippet is a shortcut used to open a TV Widget, as a dynamic bookmark to TV Widget content.

NETCAST

Guided Setup

WIDGETS

Activate Yahoo! TV Widgets. The first time you use Yahoo! TV Widgets the step-by-step

wizard begins with the Welcome Screen.

ENTER

Select Let’s get started!. If you select

Exit Setup now, this step will be

resumed the next time you press

WIDGETS.

Navigate to your location.

ENTER

Select your country.

ENTER

Select Ok, I accept.

ENTER

Select Ok, I accept.

ENTER

Select Continue and review the tutorial.

Select Exit setup to start using Yahoo!

Widgets now.

2Choosing your country allows the use of

localized content.

3Accepting the Yahoo! Privacy Policy is required

to use Yahoo! Widgets.

4Accepting Yahoo! Terms of Service is also

required to use Yahoo! TV Widgets.

6Test your network connection. After setup is

completed, a tutorial on how to use Yahoo! TV

Widgets will come up next.

5Enter your name to setup your profile.

ENTER

Select letters and spell your

name.

ENTER

Select Save this name and

create your profile.

NETCAST

Using Yahoo! TV Widgets

The sidebar’s bottom toolbar includes four color-

coded buttons.

RED Close the sidebar and return to

watching TV.

YELLOW

Add or delete a snippet.

GREEN Change the widget’s settings. BLUE Resize video to fit onscreen, or to

make it fullscreen.

WIDGETS

Activate Yahoo! TV Widgets.

ꔛ

The horizontal list at the bottom of your TV

screen is called “the dock”.

ꔛ

The items in this list are called “snippets”.

ꔛ

A snippet is a shortcut which opens a TV

Widget.

Move between snippets.

ꔛ

Focus is located in the leftmost region (high-

lighted in dark red).

ꔛ

The dock scrolls snippets under this focal

point.

ENTER

Open the Sidebar when the TV Widget snippet

is in focus.

ꔛ

The Home button including the main logo is

at the top of the sidebar.

Navigate a menu item.

ꔛ

The currently focused button is the one high-

lighted in dark red.

ENTER

Select the focused button.

NETCAST

Using the Profile Widget

ꔛ

The Profile Widget configures your user profile.

ꔛ

You can set up multiple profiles for multiple users.

ꔛ

Each profile maintains its own list of TV Widgets.

ꔛ

The Switch Profile menu allows you to switch to a different user profile.

ꔛ

The Profile Settings menu allows you to customize your profile, create

a profile PIN, or limit the installation of widgets.

ꔛ

The System Settings menu allows you to change your Location,

Repeat the Tutorial, and Restore Factory Settings.

ꔛ

Restore Factory Settings will erase all profiles and widgets installed

by users, and restore the original configuration. (See also NetCast

➜ Setup ➜ Service maintenance ➜ Restore Yahoo! Factory

Settings)

ꔛ

The Administrative Controls menu allows you to set the Screen

Saver timeout, create the Owner PIN, and to Create a Profile.

ꔛ

The Sign in to Yahoo! menu allows you to personalize your experience

using your Yahoo! ID.

ꔛ

If you don’t have a Yahoo! ID yet, please visit http://www.yahoo.com

to create one.

Using the Widget Gallery

ꔛ

The Widget Gallery allows you to browse and discover new TV

Widgets.

ꔛ

The featured TV Widgets are highlighted in the display case at the

top of the sidebar.

ꔛ

You can also browse available TV Widgets by category.

ꔛ

To install a widget, select Add Widget to My Profile and press the

ENTER button.

ꔛ

The Owner PIN is needed to install widgets for profiles that have

been protected through the Limit Profile indicator under Profile

Widget Profile Settings.

ꔛ

Go to the Profile Widget Administrative Controls menu to set or

change the Owner PIN.

ꔛ

The maximum number of Widget which can be installed is 10.

ꔛ

You can delete the Widget by pressing the RED button after

YELLOW button in Dock setting.

NETCAST

Using the Yahoo! News Widget

ꔛ

The Yahoo! News Widget provides the latest headline news for

business, entertainment, politics, sports, top stories, and many

other categories.

ꔛ

Select a category, press ENTER.

ꔛ

Select a headline within the category, press ENTER.

ꔛ

View the dynamically updated news summary for the selected

headline.

Using the Yahoo! Weather Widget

ꔛ

The Yahoo! Weather Widget provides updates on your local and

favorite weather locations with content that dynamically changes

with weather conditions.

ꔛ

Press the GREEN button to display the Settings menu.

ꔛ

From the Settings menu you can add or remove a city for which

you want to view weather information.

- Add a New City by entering the name of the city.

Once the search results are displayed, select the city you want

and press ENTER button.

- Delete a City by selecting the city you want to delete from the

city list. Press ENTER button and confirm the deletion.

- Select the Display Units As button to change the temperature

indication mode to Imperial or Metric. Imperial will show tem-

peratures in Fahrenheit and Metric will use Celsius.

ꔛ

To create a snippet for a favorite city:

- Select the city from the home page and view the detailed

weather information.

- Press the YELLOW button.

- Select the Add Snippet button and press ENTER to add the

city as a snippet.

ꔛ

To delete a snippet for a city:

- Navigate to the snippet and press ENTER button to start the

widget. The detailed page for the snippet’s city will be dis-

played.

- Press the YELLOW button.

- Select the Delete Snippet button and press ENTER button to

remove the snippet.

NETCAST

Using the Yahoo! Finance Widget

ꔛ

View stock information and the latest stock news with the Yahoo!

Finance Widget.

ꔛ

Press the GREEN button to set up your stocks.

- Use the Add New Symbol menu to enter the name of a new

stock.

- Select the stock you want to add from the search results and

select the Add Symbol button and press ENTER button.

- The selected stock is added to the My Stocks list.

- The Import Symbols From Yahoo! menu retrieves the stocks

from your Yahoo! Finance portfolio.

- The Merge Symbols button merges the symbols in the Yahoo!

Finance Widget with the symbols from your portfolio.

- The Replace Symbols button deletes the symbols in the Yahoo!

Finance Widget and replaces them with the symbols from your

portfolio.

- The Display Format button changes the stock-price fluctua-

tion transition to Value or Percentage.

ꔛ

To create a snippet for a favorite stock:

- Select the stock symbol from the home page and view the

detailed finance information.

- Press the YELLOW button.

- Select the Add Snippet button and press ENTER button to add

the stock as a snippet.

ꔛ

To delete a snippet:

- Navigate to the snippet and press ENTER button to start wid-

get. The detailed page for the snippet’s stock will be displayed.

- Press the YELLOW button.

- Select the Delete Snippet button and press ENTER button to

remove the snippet.

NETCAST

Using the flickr Widget

ꔛ

The flickr Widget provides a television-viewing experience

while watching slideshows of family and friends’ photos.

ꔛ

Personalize the flickr Widget by logging in with your

Yahoo! ID. Refer to Using the Profile Widget for instruc-

tions.

ꔛ

The Your Photos menu shows photos you have registered

with the flickr website.

ꔛ

The Your Sets menu allows you to view photos you have

classified in flickr.

ꔛ

The Explore menu allows you to explore photos featured

by the flickr website.

ꔛ

The Mark as Favorite moves photos to your Favorite

Photos set.

ꔛ

The Favorite Photos menu allows you to see the photos

you have classified as favorites.

ꔛ

The Your Contacts menu allows you to see updates from

family and friends.

ꔛ

The Your Groups menu allows you to select your favorite

groups from the flickr website http://www.flickr.com to

share and enjoy photos with the flickr community of

users.

ꔛ

To view photos in a slideshow:

- Select a thumbnail of a photo and press ENTER button

to view the photo’s details.

- Select Start Slideshow and press ENTER button.

ꔛ

To control the slideshow display:

- Press ENTER button during a slideshow.

- The thumbnails of photos are displayed on the bottom

of the screen.

- When the slideshow control is displayed, you can Pause,

Play, and Stop the slideshow.

- If you select the INFO button and press ENTER button,

you can view details for the selected photo.

ꔛ

To configure the Settings, press the GREEN button.

- The Time Per Slide button controls the speed of the

slideshow.

- The Repeat button will restart the slideshow at the

beginning after the last photo is shown.

NETCAST

Restoring Yahoo! Factory Settings will delete all of your profiles and installed widgets.

Restore Yahoo! Factory Settings

Troubleshooting

1Display NetCast menu.

RED Select Setup option.

ENTER

Select Service Maintenance.

ENTER

Select Restore Yahoo! Factory Settings.

ENTER

Select OK to restore Yahoo! factory settings.

This TV will restore Yahoo! factory settings.

Setup

Weather Effect

Service Maintenance

Setup

Restore Yahoo! Factory Settings

Netflix Deactivation

Vudu Deactivation

Cancel

Do you want to restore Yahoo! factory setting?

This will deleted all the profiles and widgets you have

installed.

Yahoo! TV Widgets Problems

Misc.-Caption,

Language displayed

within Widget

Did the customer

change Menu lan-

guage but Widget

did not change its

language.

ꔛ

Some Widgets do not fully support TV Menu options.

ꔛ

The help site for individual widget can be found in the settings

panel of each widget by pressing the GREEN button on your

remote after opening that widget from the Dock.

NETCAST

Yahoo! TV Widgets Problems

Failed to launch Yahoo! TV Widgets

Was the customer

watching HDMI

input?

ꔛ

To use Yahoo! TV Widgets while using the HDMI input, turn off

“Simplink-on” in the OPTION menu. Or change to another Input

and press then press the WIDGETS button.

Was the customer

watching My Media?

ꔛ

The WIDGETS button is blocked when using MY MEDIA.

ꔛ

Exit MY MEDIA by pressing the NETCAST button and then select

Yahoo!

Nothing happens

when pressing

WIDGETS button

ꔛ

Turn off the TV and then turn it back on. Press the NETCAST

button and then the RED button. Select “Restore Yahoo! Factory

Settings” to restore the Yahoo! Factory Settings.

ꔛ

For more help, visit the Yahoo! help site: http://connectedtv.yahoo.

com/help.

Failed to open some widgets

Is “Loading” mes-

sage displayed?

ꔛ

If the “Loading” message does not go away after a reasonable

amount of time, delete that wid get and re-install it.

Check IP Address

setting is OK?

ꔛ

Make sure the TV can connect to the internet.

Is Connection

Unavailable icon (yel-

low triangle) dis-

played on snippet?

ꔛ

If connection unavailable icon is displayed, the server may under

maintenance or unreachable for other reasons. Try again later or

visit the Yahoo! help site. http://con nectedtv.yahoo.com/help

Some Widgets work

properly while others

do not.

ꔛ

Try again later.

ꔛ

Try re-installing the Widget. Delete that widget by pressing the

Yellow button when it's highlighted in the dock. Then press the

Red button twice to delete that wid get. Then open the Widget

Gallery and browse to find that widget and select “Add Widget to

My Profile” to install that wid get and then try again.

ꔛ

If problem still exists, restore Yahoo! factory settings by pressing

NETCAST button and RED button on your remote control.

If it stops in Loading

ꔛ

Perform Restore Yahoo! Factory Settings.

NETCAST

Yahoo! TV Widgets Problems

Widget is stuck if the remote control button is pressed.

Press BACK button

and try again later.

ꔛ

The error may only be temporary. Exit out and try again.

Check IP Address

setting is OK?

ꔛ

If not, connect Network Cable properly and set IP address from

Network menu and try again or contact Internet service provider.

Press RED or

WIDGETS button on

remote control.

ꔛ

Exits Yahoo! TV Widgets by pressing RED button on your remote

and re-enter by WIDGETS button.

Press NETCAST but-

ton.

ꔛ

Exits Yahoo! TV Widgets by pressing NETCAST button and enter

NETFLIX temporarily, and re-enter Yahoo! Widgets by pressing

NETCAST button and select Yahoo!

ꔛ

If the problem still exists, re-install the Widget. Press the Yellow

button with the Widget highlighted in the Dock. Press the Red

button twice to delete that widget. Now open the Widget Gallery

and browse to find that widget and select “Add Widget to My

Profile” to install that widget and then try again.

ꔛ

If the problem still exists for all widgets, restore the Yahoo! Factory

settings by pressing the NETCAST button and the RED button on

your remote control. Select “Restore Yahoo! Factory Settings” to

reset.

Gallery - Unable to install

widget from gallery

Check IP Address

setting is OK?

ꔛ

If not, connect Network Cable properly and set IP address from

menu-Option and try again or contact Internet service provider.

Is Lock Icon on right

side of “Add Widget

to My Profile”?

ꔛ

Need Owner PIN to install. If you forgot Owner PIN, contact Yahoo!

for further help. http://connectedtv.yahoo.com/help

“Install completed”

but it never worked.

ꔛ

Try to re-start Yahoo! TV Widgets after you enter YouTube and exit

from YouTube.

ꔛ

Or Delete it and re-install it.

Flickr - “We could not find

anything to display” mes-

sage displayed

Is connection

unavailable icon

(yellow triangle)

displayed?

ꔛ

If yes, check network settings or contact internet service provider,

or try later.

Did you sign-in

Yahoo! account?

ꔛ

If yes, you need to upload your photos to Flickr site to display.

ꔛ

If not, try again later. The Flickr server may be under mainte-

nance, or contact service provider.

NETCAST

You can instantly watch movies (quite a few new releases) & TV episodes from Netflix streamed over

the internet to your TV.

To become a Netflix member visit:

www.netflix.com/LG

Activating your TV establishes a connection between your TV and your Netflix account. You must acti-

vate your TV before you can use it to watch movies streamed over the INTERNET from Netflix.

If newer software is needed, a software update screen will automatically appear.

Note that this service is provided by the Content Provider, Netflix. It is dependent on Netflix to pro-

vide the data.

Activating the TV

ꔛ

no-start my FREE trial: If you have no

account, visit

http://www.netflix.com/LG

your computer.

NETFLIX

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

1Select NETFLIX.

ENTER

Select yes-activate instant

streaming from Netflix if you

have an existing account.

3Visit the Netflix website on your computer:

www.netflix.com/activate

Enter your Sign in Name and Password to log

into your account.

NETCAST

4See the activation code on your TV screen,

6You’re ready to add movies to your instant

Queue.

5Wait for the poster screen to appear on your

TV.

Enter this activation code to the Netflix Website

and click Activate.

Activation Code

NETCAST

Netflix ESN (Electronic Serial Number)

We provide you the Netflix ESN (Electronic Serial Number) that allows you to watch videos using the

Netflix website.

For more information, please visit: www.netflix.com

NETWORK ꔂ Move ꔉ Enter

• Network Setting : Wired

• Network Status : Internet is connected

• Legal Notice

• ESN

NETWORK ꔂ Move ꔉ Enter

• Network Setting : Wired

• Network Status : Internet is connected

• Legal Notice

• ESN

ꔉ

ꔠꔉ

ꔠ

LGE-xxxxxxxxxxxxxxxxxxxx

Select NETWORK.

ENTER

Select ESN.

ENTER

See the ESN serial number.

NETCAST

Once deactivated, TV will no longer instantly stream from your Netflix Instant Queue.

If you deactivate, the TV cannot instantly stream from your Netflix Instant Queue.

If you want, you can activate Netflix later.

Netflix Deactivation

1Display NetCast menu.

RED Select Setup option.

ENTER

Select Service Maintenance.

ENTER

Select Netflix Deactivation.

ENTER

Select OK to deactivate the TV.

This TV is not currently activat-

ed to instantly stream from

your Netflix instant Queue.

Setup

Weather Effect

Service Maintenance

Setup

Restore Yahoo! Factory Settings

Netflix Deactivation

Vudu Deactivation

OK Cancel

Do you want to deactivate this device?

Once deactivated, this device will no longer instantly

stream from your Netflix instant Queue.

NETCAST

In order to make rental/purchase transactions on the Vudu service, a user must create an account on

vudu.com. That account is linked to a specific device, via a process called “activation”. It is possible

to have multiple devices associated with a single Vudu account.

If newer software is needed, a software update screen will automatically appear.

Note that this service is provided by the Content Provider, Vudu. It is dependent on Vudu to provide the

data.

Activating the TV

4You will receive an e-mail with a link.

Click the e-mail link.

5Create your VUDU account to activate your

TV if you no have account.

If you have an existing account, log into your

account.

6Enter your Sign in Email address and Password

to log into your account.

7Your VUDU account has been activated.

1Select VUDU.

ENTER

Select FREE HD Rental.

ENTER

Enter your e-mail address.

NETCAST

Once deactivated, this TV will no longer instantly stream from Vudu.

If you want, you can activate VUDU later.

VUDU Deactivation

Setup

Weather Effect

Service Maintenance

Setup

Restore Yahoo! Factory Settings

Netflix Deactivation

Vudu Deactivation

OK Cancel

Do you want to deactivate this device?

Deactivated VUDU will remove this device from

your VUDU account.

1Display NetCast menu.

RED Select Setup option.

ENTER

Select Service Maintenance.

ENTER

Select Vudu Deactivation.

ENTER

Select OK to deactivate the TV.

LG 55LX9500 SAC34134205_1 User Manual Owner's Sac34134205 2 Eng

Navigation menu

Versions of this User Manual:

Views

Navigation