LG 55UW660H User Manual Owner's MFL69412017 1.2 MFL69354916 0.0 RS

55UW660H Owner's Manual MFL69412017_1.2+MFL69354916_0.0+RS; Most comprehensive of product setup and usage. (English)

User Manual: LG 55UW660H Owner's Manual Most comprehensive of product setup and usage. (English)

Open the PDF directly: View PDF .
Page Count: 53

Download
Open PDF In Browser	View PDF

OWNER’S MANUAL

Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and
retain it for future reference.
43UW660H
49UW660H
55UW660H
65UW660H

49UW970H
55UW970H
65UW970H
75UW970H

*MFL69412017*

www.lg.com
P/NO : MFL69412017 (1702-REV02)

Important Safety Instructions
Always comply with the following precautions
to avoid dangerous situations and ensure peak
performance of your product.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
••Do not use this apparatus near water.

WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

ENGLISH

TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the device.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

2

••Clean only with dry cloth.

••Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

••Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

••Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

••Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

••Only use attachments/accessories specified by
the manufacturer.

••Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

••Unplug this apparatus during lightning storms
or when unused for long periods of time.

••Do not apply pressure on the panel during
handling or a sharp object such as a nail, pencil,
or pen, or make a scratch on it.

••Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.
••Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed.
If swallowed, induce vomiting and go to the
nearest hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.

ENGLISH

••Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

••CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner’s
manual to be certain concerning current
requirements. Do not connect too many
devices to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your device,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the device, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the device. Do not
move the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be sure
do grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug
the TV.

••Warning - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles,
or expose the TV to direct air conditioning.

••Do not expose to dripping or splashing and
do not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.,
on shelves above the unit).

3

••Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e., a TV
with a three-prong grounded AC plug must
be connected to a three-prong grounded AC
outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker. Do not try to ground the unit by
connecting it to telephone wires, lightning rods,
or gas pipes.

Circuit
Breaker

Power
Supply

ENGLISH

••As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
••Do not attempt to modify this product in any
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this product.
••Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can come in contact with
such power lines or circuits as death or serious
injury can occur. Be sure the antenna system is
grounded to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC)
in the U.S.A. provides information with respect
to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire

Ground Clamp

Antenna Discharge Unit
(NEC Section 810-20)

Electric Service
Equipment

Grounding Conductor
(NEC Section 810-21)

Ground Clamp
NEC: National Electrical Code

4

Power Service Grounding
Electrode System
(NEC Art 250, Part H)

••Cleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the
TV as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzene.
••Moving
Make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2
or more people to carry larger TVs. Do not press
or put stress on the front panel of the TV.
••Ventilation
Install your TV where there is proper ventilation.
Do not install in a confined space such as a
bookcase. Do not cover the product with cloth or
other materials while plugged. Do not install in
excessively dusty places.
••If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
••If water or another substance enters the
product (like an AC adapter, power cord, or TV),
disconnect the power cord and contact the
service center immediately. Otherwise, this may
result in fire or electric shock.

••Use only an authorized AC adapter and power
cord approved by LG Electronics. Otherwise, this
may result in fire, electric shock, malfunction, or
product deformation.

••Never disassemble the AC adapter or power
cord. This may result in fire or electric shock.

••Handle the adapter carefully to avoid dropping
or striking it. An impact could damage the
adapter.

ENGLISH

••Keep the product away from direct sunlight.
••Never touch this apparatus or antenna during a
lightning storm.
••When mounting a TV on the wall, make sure not
to install the TV by hanging the power and signal
cables on the back of the TV.
••Do not allow an impact shock, any objects to fall
into the product, and do not drop anything onto
the screen.
••DISCONNECTING THE DEVICE FROM THE MAIN
POWER
The power plug is the disconnecting device.
In case of an emergency, the power plug must
remain readily accessible.
••Batteries
Store the accessories (battery, etc.) in a safe
location out of the reach of children.
••This apparatus uses batteries. In your community
there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact
your local authorities for disposal or recycling
information.
••Do not dispose of batteries in a fire.
••Do not short circuit, disassemble, or allow the
batteries to overheat.
••Do not use high voltage electrical equipment
near the TV, (e.g., a bug zapper.)
This may result in product malfunction.
••Dot Defect
This panel is an advanced product that contains
millions of pixels. In a very few cases, you could
see fine dots on the screen while you’re viewing
the TV. Those dots are deactivated pixels and
do not affect the performance and reliability of
the TV.

••Generated Sound
Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction due to
temperature and humidity. This noise is common
for products where thermal deformation is
required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a highspeed switching circuit, which supplies a large
amount of current to operate a product. It varies
depending upon the product. This generated
sound does not affect the performance and
reliability of the product.
••Take care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or
cause defects in the product.
••Do not install this product on a wall if it could be
exposed to oil or oil mist. This may damage the
product and cause it to fall.
••If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This is
normal; there is nothing wrong with TV. Some
minute dot defects may be visible on the screen,
appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the TV’s
performance. Avoid touching the LCD screen or
holding your finger(s) against it for long periods
of time. Doing so may produce some temporary
distortion effects on the screen.
••Displaying a still image for a prolonged period
of time may cause an image sticking. Avoid
displaying a fixed image on the TV screen for a
extended length of time.

5

Viewing 3D Imaging
(For 3D models)

CAUTION

ENGLISH

••Guardians should not leave children
unsupervised who are watching a 3D video.
Guardians should make children stop watching
the video and take a break if they experience eye
fatigue, headache, or dizziness.
••When viewing a 3D video, some may experience
discomfort such as a headache, dizziness,
fatigue, or blurred vision. In this case, stop
watching the 3D video and take a break.
••If you watch a 3D video for a long time, you
may experience eye fatigue. In this case, stop
watching the 3D video and take a break.
••Only use LG 3D glasses. Otherwise, you may not
be able to view 3D videos properly.
••Do not use 3D glasses instead of your normal
glasses, sunglasses, or protective goggles. Place
the 3D glasses over your normal eye ware.
••Do not keep your 3D glasses in extremely high or
low temperatures. It will cause deformation.
••Do not use the 3D glasses while walking or
moving around. It may cause an accident or
injury.
••Be careful not to poke your eye with the frames
of the 3D glasses.
••Do not watch 3D content if you have
photosensitive seizures, epilepsy, or heart disease.

Preparing
NOTE
••When the TV is turned on for the first time after
being shipped from the factory, initialization of
the TV may take approximately one minute.
••Image shown may differ from your TV.
••Your TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.
••The available menus and options may differ from
the input source or product model that you are
using.

6

••New features may be added to this TV in the
future.
••The items supplied with your product may vary
depending upon the model.
••Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
••For an optimal connection, HDMI cables and
USB devices should have bezels less than 10 mm
(0.39 inches) thick and 18 mm (0.7 inches) width.
••Use an extension cable that supports USB 2.0 if
the USB cable or USB flash drive does not fit into
your TV’s USB port.
••Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
••Recommended HDMI cable types (3m or less)
-- High-Speed HDMI®/™ cable
-- High-Speed HDMI®/™ cable with Ethernet

B

B
A

A
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)

CAUTION

••Do not use any unapproved items to ensure the
safety and lifespan of the product.
••Any damages or injuries by using unapproved
items are not covered by the warranty.
••Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.
••When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
••Make sure that the screws are fastened tightly.
(If they are not fastened securely enough, the TV
may tilt forward after being installed.)
••Do not fasten the screws with excessive force
otherwise they may be worn out and become
loose.

••When cleaning the product, be careful not to
allow any liquid or foreign objects to enter the
gap between the upper, left or right side of the
panel and the guide panel. (For UW970H series)

Warning when using USB storage
devices

Optional Extras
Optional extras can be changed or modified for
quality improvement without any notification.
Contact your dealer for buying these items. These
devices work only with certain models. The model
name or design may be changed due to the
manufacturer’s circumstances or policies.
(Depending upon model)
AN-VC550
Smart Camera

AN-MR650
Magic Remote

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
••It is recommended to move the TV in the box or
packing material that the TV originally came in.
••Before moving or lifting the TV, disconnect the
power cord and all cables.
••When holding the TV, the screen
should face away from you to
avoid damage.
••Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grille area.

ENGLISH

••USB storage devices with a built-in auto
recognition program or its own driver may not
work.
••Some USB storage devices may not work or may
work improperly.
••Use only those USB storage devices formatted
with FAT32 or NTFS File System provided by
Windows.
••For external USB HDD, use devices with less than
5V-rated voltages and 500 mA-rated current.
••It is recommended to use USB flash drive with 32
GB or less and USB HDD with 2 TB or less.
••If a USB HDD with power-saving function does
not work properly, turn the power off and on.
For more information, refer to the user manual
of USB HDD.
••Data in the USB storage device can be damaged
so back up important files in other devices. Data
maintenance is the user’s responsibility. The
manufacturer is not responsible for data loss.

Lifting and Moving the TV

••Use at least two people to move
a large TV.
••When transporting the TV by
hand, hold the TV as shown in the
following illustration.
••When transporting the TV, do not expose the TV
to jolts or excessive vibration.
••When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the
left or right.
••When handling the TV, be careful not to damage
the protruding buttons.

AG-F***
Cinema 3D
Glasses

7

Adjusting the Menu

CAUTION
••Avoid touching the screen at all times, as this
may result in damage to the screen.
••Do not place the product on the floor with its
front facing down without padding. Failure to do
so may result in damage to the screen.
••Do not move the TV by holding the cable
holders, as the cable holders may break, and
injuries and damage to the TV may occur.
(Depending upon model)

When the TV is turned on, press button one
time. You can adjust the Menu items pressing or
moving the buttons.

Using the Button

Mounting on a Table

(Depending upon model)
You can simply operate the TV functions, pressing
or moving the button.

1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.

Turns the power off.
Accesses the setting menu.
Clears on-screen displays and returns to TV
viewing
Changes the input source.

10 cm

Dome Button

ENGLISH

10 cm

(4 inches)
10 cm
m

10 c

Basic Functions
Power On (Press)
Power Off (Press and Hold) 1
Volume Control

Channels Control

1 All running apps will close.

8

2 Connect the power cord to a wall outlet.

CAUTION
••Do not place the TV near or on sources of heat,
as this may result in fire or other damage.

Adjusting the Angle of the TV to
Suit View

Stand

(Depending upon model)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.

Desk

NOTE

20˚

20˚

••Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15 mm, Screw: M5 x L25
[TYPE 2]

CAUTION
••When adjusting the angle of the TV, watch out
for your fingers.
-- Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.

(Depending upon model)
The TV should be attached to a desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
[TYPE 1]

ENGLISH

Attaching the TV to a desk
(optional)

2-Screws, 2-Washers, 2-Nuts
(provided as parts of the product.)
Stand

Desk

Using the kensington security
system
(Depending upon model)

4-Screws
(Not provided as parts of the product.)

The Kensington security system connector is
located at the rear or stand of the TV. For more
information of installation and using, refer to the
manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.

9

Securing the TV to a Wall
(optional)

ENGLISH

1 Insert and tighten the eye-bolts or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.

CAUTION

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the wall
mount bracket on a solid wall perpendicular to the
floor. If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. The LG wall
mount is easy to adjust or to connect the cables.
When you do not use LG’s wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough space
to allow connectivity to external devices. If you are
using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then
attach the TV to the mount.

10 cm

(4 inches)
10 cm

10 cm

••Make sure that children do not climb on or hang
on the TV.

NOTE
••Use a platform or cabinet that is strong and large
enough to support the TV securely.
••Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local
dealer.

10

Mounting on a Wall

10 cm

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.

Model

43UW660H

VESA (A x B)
Standard screw
Number of screws
Wall mount
bracket (optional)

200 x 200
M6
4
LSW240B
MSW240

65UW660H
65UW970H
VESA (A x B)
300 x 300
Standard screw
M6
Number of screws 4
Wall mount
LSW350B
bracket (optional)
Model

49/55UW660H
49/55UW970H
300 x 300
M6
4
LSW350B
MSW240
75UW970H
600 x 400
M8
4
LSW640B

A
B

CAUTION

NOTE
••When using the wall mount, it is recommended
that you apply a piece of tape over the stand
holes to prevent dust and bugs from entering
the holes. (Depending upon model)

Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device’s connection,
refer to the manual provided with each device.
NOTE
••This model supports 4K (ULTRA HD) videos in
HDMI and USB input.
••ULTRA HD videos are not supported in the tuner
input.
••If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
••The external device connections shown may
differ slightly from illustrations in a manual.
••Connect external devices to the TV regardless
about the order of the TV port.
••If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
••Refer to the external equipment’s manual for
operating instructions.

ENGLISH

••Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.

Stand Hole

••Depending upon the shape of the stand, use a
flat tool to remove the stand cover as illustrated
below. (e.g., a flat screwdriver)

11

Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.

CAUTION
••Make sure not to bend the copper wire of the RF
cable.

A

Copper wire
••Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.

NOTE

ENGLISH

••Use a signal splitter to use 2 TVs or more.
••DTV Audio Supported Codec: MPEG, Dolby Digital.
••Direct ULTRA HD broadcast is unavailable in
areas without an ULTRA HD signal.
••This TV cannot receive ULTRA HD (3840 x 2160
pixels) broadcasts directly because the related
standards have not been confirmed. (Depending
upon model)

Other Connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable.

NOTE
••Use only with the 3 pole 3.5 mm stereo jack.
••Do not connect your headphones or earphones
to the port for connecting an external speaker.

Remote Control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or
leak, resulting in fire, personal injury, or ambient
pollution. To remove the batteries, perform the
installation actions in reverse. This remote uses
infrared light. When in use, it should be pointed in
the direction of the TV’s remote sensor.
12

A
(Power) Turns the TV on or off.
Accesses the Smart menu.
Selects the remote’s operating mode: TV.
Selects the remote’s operating mode: DVD.
INPUT Changes the input source.
Turns the TV off in a set amount of time.
Number button Enters numbers. Also supports
characters.
(Dash) Inserts a dash between numbers such as
2-1 and 2-2.
Tunes to the last channel or input
viewed.
Adjusts the volume level.
Switches between Letter and Number
input modes.
Selects a closed caption.
Enables VD function. SAP (Secondary Audio
Program) feature can also be enabled by pressing
the key.
Deletes letters or numbers.
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.

To select Picture Mode

B

B

To use HDMI ULTRA HD Deep
Color

ENGLISH

Displays and removes the interactive menu.
Views the information of the current program.
Displays and removes the electronic
program guide of Pro:Centric Application.
Navigation button (up / down / left / right) Scrolls
through menus or options.
Selects menus or options and
confirms your input.
Returns to the previous screen.
Accesses the quick settings.
Clears all on-screen displays and returns to
TV viewing.
Color buttons ( Red, Green, Yellow, Blue)
These access special functions in some menus.
, , , , Control buttons for media contents
Feature can only be enabled or disabled
by installer menu settings. Configuration of this
feature is not supported on TV remote control.
,
,
,
,
Not functional.
Used for viewing 3D video. (For 3D models)

MENU SETTINGS
Picture Picture Mode
Select the picture mode optimized for the viewing
environment or the program.
••Vivid Heightens contrast, brightness, and
sharpness to display vivid images.
••Standard Displays images in standard levels of
contrast, brightness and sharpness.
••APS APS (Auto power saving) mode reduces
power consumption by dimming control.
••Cinema / Sport / Game / Photo Displays the
optimum picture for movie, sport, game, or photo.
••Expert Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV
viewing. This menu for adjustment is provided
for ISF-certified picture tuning professionals.
(ISF logo can be used only on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified
Calibration Control (Depending upon model)
••Depending upon the input signal, the available
range of picture modes may differ.
••Expert mode is for picture tuning professionals to
control and fine-tune using a specific image. For
normal images, the effects may not be drastic.

••MENU SETTINGS j j General j HDMI
ULTRA HD Deep Color:
-- On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)
-- Off: Support 4K @ 60 Hz 8bit (4:2:0)
••If the device connected to Input Port also
supports ULTRA HD Deep Color, your picture
may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case,
connect the device to a different HDMI port or
change the TV’s HDMI ULTRA HD Deep Color
setting to Off.
-- This feature is available only on certain models
which support HDMI ULTRA HD Deep Color.

13

Specifications

HDMI (PC) supported mode
(Depending upon model)

Product specifications may be changed without
prior notice due to upgrade of product functions.

Television System
ATSC, NTSC-M, 64 & 256 QAM

Program Coverage
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135,
CADTV 1-135

External Antenna Impedance

Resolution
640 x 350
720 x 400
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1360 x 768
1920 x 1080
3840 x 2160

75 Ω

Environment condition

4096 x 2160

ENGLISH

••Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
••Operating Humidity
Less than 80 %
••Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
••Storage Humidity
Less than 85 %

Horizontal
Frequency (kHz)
31.46
31.46
31.46
37.87
48.36
54.34
63.98
47.71
67.50
67.50
56.25
54.00
53.95
54.00

HDMI (DTV) supported mode
(Depending upon model)
Resolution
640 x 480p

Wireless Module Specifications

720 x 480p

Wireless Module (LGSBWAC61) Specifications

1280 x 720p

Wireless LAN (IEEE 802.11a/b/g/n/ac)

1920 x 1080i

Frequency range

Output power (Max.)

2400 to 2483.5 MHz

15 dBm

5150 to 5725 MHz

16 dBm

5725 to 5850 MHz

12.5 dBm

1920 x 1080p

Bluetooth
Frequency range

Output power (Max.)

2400 to 2483.5 MHz

10 dBm

As band channels can vary per country, the user cannot
change or adjust the operating frequency. This product
is configured for the regional frequency table.

3840 x 2160p

For consideration of the user, this device should be
installed and operated with a minimum distance of 20 cm
(7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC61 /IC: 2703H-LGSBWAC61
4096 x 2160p

Horizontal
Frequency (kHz)
31.46
31.50
31.47
31.50
44.96
45.00
33.72
33.75
26.97
27.00
33.71
33.75
67.43
67.50
53.95
54.00
56.25
61.43
67.50

Vertical
Frequency (Hz)
59.94
60.00
59.94
60.00
59.94
60.00
59.94
60.00
23.97
24.00
29.97
30.00
59.94
60.00
23.98
24.00
25.00
29.97
30.00

135.00

60.00

134.86
53.95
54.00
56.25
61.43
67.50
135.00
134.86

59.94
23.98
24.00
25.00
29.97
30.00
60.00
59.94

NOTE
14

Vertical
Frequency (Hz)
70.09
70.08
59.94
60.31
60.00
60.05
60.02
60.01
60.00
30.00
25.00
24.00
23.97
24.00

••The optimal display resolution
-- 3840 X 2160

Supported Video Formats

Supported Audio Formats

••.asf, .wmv
[Video] VC-1 Advanced Profile (except for WMVA),
VC-1 Simple and Main Profiles
[Audio] WMA Standard (except for WMA v1 /
WMA Speech)
••.avi
[Video] XViD (except for 3 wrap-point GMC),
H.264/AVC, Motion Jpeg, MPEG-4
[Audio] MPEG-1 Layer I, II, MPEG-1 Layer III(MP3),
Dolby Digital, LPCM, ADPCM, *DTS
••.mp4, .m4v, .mov
[Video] H.264/AVC, MPEG-4, HEVC
[Audio] Dolby Digital, Dolby Digital Plus, AAC,
MPEG-1 Layer III (MP3)
••.3gp, .3g2
[Video] H.264/AVC, MPEG-4
[Audio] AAC, AMR(NB/WB)
••.mkv
[Video] MPEG-2, MPEG-4, H.264/AVC, VP8, VP9,
HEVC
[Audio] Dolby Digital, Dolby Digital Plus, AAC,
PCM, MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
*DTS
••.mpg, .mpeg, .dat
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, II, MPEG-1 Layer III(MP3)
••.ts, .trp, .tp, .mts
[Video] H.264/AVC, MPEG-2, HEVC
[Audio] MPEG-1 Layer I, II, MPEG-1 Layer III(MP3),
Dolby Digital, Dolby Digital Plus, AAC, PCM
••.vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
*DTS: Depending upon model

••File type: .mp3
[Bit rate] 32 Kbps ~ 320 Kbps
[Sample freq.] 16 kHz ~ 48 kHz
••File type: .wav
[Sample freq.] 8 kHz ~ 48 kHz
••File Type: .ogg
[Bit rate] 64 kbps ~ 320 kbps
[Sample freq.] 8 kHz ~ 48 kHz
••File Type: .wma
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz

Supported Photo Formats

ENGLISH

(Depending upon model)
••Category: 2D (.jpeg, .jpg, .jpe)
[Photo size]
Minimum: 64 x 64 (FHD), 128 x 128 (ULTRA HD)
Maximum: Normal Type: 15,360 (W) x 8,640 (H)
Progressive Type: 1,920 (W) x 1,440 (H)
••Category: 3D (.jps, .mpo)
[Photo size]
Minimum: 64 (W) x 64 (H)
Maximum: Normal Type: 15,360 (W) x 8,640 (H)
••Category: PNG
[Photo size]
Minimum: 64 x 64,
Maximum: 5,760 (W) x 5,760 (H)
••Category: BMP
[Photo size]
Minimum: 64 x 64,
Maximum: 1,920 (W) x 1,080 (H)
••BMP and PNG format files may be slower to
display than JPEG.
••Non-standard photo/image file may not be
displayed.

15

Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for three
(3) years from the date on which you purchased
the product.

Licenses
Supported licenses may differ by model. For more
information about licenses, visit www.lg.com.

Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.

Troubleshooting

ENGLISH
16

The software may be updated for improvement
in performance. The customer is responsible to
ensure the compatibility of their equipment with
any LG Electronics software. If needed, please
consult with LG Electronics and update new
software versions according to the guidance
provided by LG Electronics.
••Cannot control the TV with the remote control.
-- Check if anything such as tape has been placed
over the receiver.
-- Check if there is any obstacle between the
product and the remote control.
-- Replace the batteries with new fresh ones.
••No image display and no sound is produced.
-- Check if the product is turned on.
-- Check if the power cord is connected to a wall
outlet.
-- Check if there is a problem in the wall outlet by
connecting other products.
••The TV turns off suddenly.
-- Check the power control settings. The power
supply may be interrupted.
-- Check if the Sleep Timer / Timer Power Off
feature is activated in the Timers settings.
-- If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of
inactivity.

The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.

For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, & DTS and the
Symbol together are registered trademarks of
DTS, Inc. © DTS, Inc. All Rights Reserved.

Key CODES
••This feature is not available for all models.
Code
(Hexa)

Note

Code
(Hexa)

00

R/C Button

C0

(Green)

R/C Button

01

R/C Button

C1

(Red)

R/C Button

02

R/C Button

C2

(Yellow)

R/C Button

03

R/C Button

C3

(Blue)

R/C Button

06

R/C Button

8E

R/C Button

07

R/C Button

8F

R/C Button

R/C Button

B0

R/C Button

R/C Button

B1

ꕗ

R/C Button

R/C Button

BA

ꕘ

R/C Button

R/C Button

AA

R/C Button

39

R/C Button

AB

R/C Button

40

R/C Button

7C

R/C Button

41

R/C Button

7E

R/C Button

43

R/C Button

DC

R/C Button

44

R/C Button

60

R/C Button

0B

R/C Button

61

R/C Button

0C

R/C Button

71

R/C Button

0E

R/C Button

72

R/C Button

1A

R/C Button

63

R/C Button

4C

R/C Button

91

R/C Button

5B

R/C Button

-

R/C Button

-

R/C Button

08

Function

(Power)

09
10 - 19 Number Key 0 - 9
(Back)

Note

ENGLISH

28

Function

17

EXTERNAL CONTROL DEVICE SETUP
••Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.

USB to Serial converter with USB Cable

USB IN

USB Type

(PC)

(TV)

RS-232C with RS-232C Cable
1

3

USB IN

DE9 (D-Sub 9 pin) Type

SERVICE ONLY

ENGLISH

••LGTV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial converter which is
RS-232C IN
(CONTROL & SERVICE)
not made nor provided by LG.
(TV)
(PC)
••It can be purchased from computer stores that carry accessories for IT
support professionals.

••You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female
type) to RS-232C cable required for
(TV)
(PC)
the connection between the PC and the TV, which is specified in the manual.
••The connection interface may differ from your2 TV.

RS-232C IN

Phone jack Type

(CONTROL & SERVICE)

3

USBUSB
IN IN

1

RS-232C IN

(CONTROL & SERVICE)

2
1

3

(TV)
(TV)
(TV)
(TV)

SERVICE ONLY

(PC)
(PC)
(PC)

(PC)
(PC)

33
3

18

RS-232C IN

(CONTROL & SERVICE)

22
2

or

(PC)
(PC)

11
1

SERVICE
ONLY
SERVICE
ONLY

RS-232C INfor the connection between the PC and the
••You need to purchase the phone-jack to RS-232 cable required
(CONTROL & SERVICE)
(TV)
(PC)
RS-232C IN
TV, which is specified in the manual.
(TV)
(PC)
(CONTROL & SERVICE)
*
For
other
models,
connect
to
the
USB
port.
2
(TV)
(PC)
* The connection interface may differ from your TV.

RS-232C IN

(CONTROL & SERVICE)

1
1

3
3

RS-232C IN

2
2
RS-232C IN

(CONTROL & SERVICE)

RS-232C IN

(CONTROL & SERVICE)

(CONTROL & SERVICE)

(TV)
(TV)
(TV)

(TV)
(TV)

Customer Computer
1

5

6

9
RS-232C
(Serial port)

RS-232C Configurations
7-Wire Configurations
(Standard RS-232C cable)
PC

3-Wire Configurations
(Not standard)
TV

PC

TV

2

3

TXD

RXD

2

3

TXD

TXD

3

2

RXD

TXD

3

2

RXD

GND

5

5

GND

GND

5

5

GND

DTR

4

6

DTR

DTR

4

6

DTR

DSR

6

4

DSR

DSR

6

4

DSR

RTS

7

8

RTS

RTS

7

8

RTS

CTS

8

7

CTS

CTS

8

7

CTS

D-Sub 9

D-Sub 9

D-Sub 9

ENGLISH

RXD

D-Sub 9

Set ID
For Set ID number, see “Real Data Mapping”
1
2
3
4
5

Press MENU SETTINGS to access the main menus.
Press the Navigation buttons to scroll to OPTION and press OK ENTER .
Press the Navigation buttons to scroll to SET ID and press OK ENTER .
Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
When you are finished, press
.
* (Depending upon model)

19

Communication Parameters
Baud rate: 9600 bps (UART)
Data length: 8 bits
Parity: None

Stop bit: 1 bit
Communication code: ASCII code
Use a crossed (reverse) cable.

Command reference list
(Depending upon model)

ENGLISH

COMMAND1 COMMAND2

DATA
(Hexadecimal)

01. Power*

k

a

00 to 01

02. Aspect
Ratio

k

c

(page 22)

03. Screen
Mute

k

d

(page 22)

13. Balance

04. Volume
Mute

k

e

k

COMMAND1 COMMAND2
11. OSD
k
Select
12. Remote
Control Lock k
Mode

DATA
(Hexadecimal)

l

00 to 01

m

00 to 01

k

t

00 to 64

00 to 01

14. Color
(Colour)
x
Temperature

u

00 to 64

f

00 to 64

15. Equalizer j

v

(page 23)

k

g

00 to 64

m
m

c
g

Key Codes
00 to 64

07. Brightness k

h

00 to 64

08. Color/
Colour

k

i

00 to 64

x

b

(page 24)

09. Tint

k

j

00 to 64

x

t

(page 24)

10. Sharpness k

k

00 to 32

16. Key
17. Control
Backlight,
Control Panel
Light
18. Input
select (Main)
19. 3D (Only
3D models)
20. Extended
3D (Only 3D
models)

x

v

(page 25)

05. Volume
Control
06. Contrast

* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed
and treated as NG. With RS-232C cable, TV can communicate “ka command” in power-on or power-off
status. But with USB-to-Serial converter cable, the command works only if TV is on.

20

Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]

:

First command to control the TV. (j, k, m or x)

[Command 2]
[Set ID]

:
:

[DATA]

:

[Cr]
[ ]

:
:

Second command to control the TV.
You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected
set can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to
0x63) on transmission/receiving protocol.
To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of
command.
Carriage Return - ASCII code ‘0x0D’
Space – ASCII code ‘0x20’

OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]

ENGLISH

The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the
PC computer.

Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.
Data 00: Illegal Code

Real data mapping (Hexadecimal : Decimal)
••When you enter the [data] in hexadecimal, refer to following conversion table.
••Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00: Step 0
32: Step 50 (Set ID 50)
FE: Step 254
01: Step 1 (Set ID 1)
33: Step 51 (Set ID 51)
FF: Step 255
...
...
...
0A: Step 10 (Set ID 10)
63: Step 99 (Set ID 99)
01 00: Step 256
...
...
...
0F: Step 15 (Set ID 15)
C7: Step 199
27 0E: Step 9998
10: Step 16 (Set ID 16)
C8: Step 200
27 0F: Step 9999
...
...
...

21

01. Power (Command: k a)
••To control Power *On or Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off

01: *Power On

Ack [a][ ][Set ID][ ][OK/NG][Data][x]
••To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement
feedback presents status about each function.
02. A
 spect Ratio (Command: k c)
(Main Picture Size)
••To adjust the screen format. (Main picture
format) You can also adjust the screen format
using the Aspect Ratio in the Q.MENU or
PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data

ENGLISH

01: Normal screen
(4:3)
02: Wide
screen(16:9)
04: Zoom
05: Zoom 2
(Latin America
except Colombia
Only)
06: Set by Program/
Original

07: 14:9
(Europe, Colombia,
Mid-East, Asia
except South Korea
and Japan)
09: * Just Scan
0B: Full Wide
(Europe, Colombia,
Mid-East, Asia
except South Korea
and Japan)
10 to 1F: Cinema
Zoom 1 to 16
0c : 21:9 (Depending
on model)

Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (highdefinition), Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.

22

03. Screen Mute (Command: k d)
••To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data

00: Screen mute off (Picture on)
Video mute off
01: Screen mute on (Picture off )
10: Video mute on

Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04. Volume Mute (Command: k e)
••To control volume mute on/off. You can also
adjust mute using the
button on remote
control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data

00: Volume mute on (Volume off )
01: Volume mute off (Volume on)

Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f )
••To adjust volume. You can also adjust volume
with the volume buttons on remote control.
Transmission [k][f ][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [f ][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
••To adjust screen contrast. You can also adjust
contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)
••To adjust screen brightness. You can also adjust
brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]

12. Remote control lock mode (Command: k m)
••To lock the front panel controls on the monitor
and remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64

Data 00: Lock off

Ack [h][ ][Set ID][ ][OK/NG][Data][x]
08. Color/Colour (Command: k i)
••To adjust the screen Color(Colour). You can also
adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
••To adjust the screen tint. You can also adjust tint
in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]

Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode. When main power is off & on (plug-off
and plug-in, after 20 - 30 seconds), external
control lock is released.
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
••To adjust balance. You can also adjust balance in
the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]

Data Red: 00 to Green: 64

10. Sharpness (Command: k k)
••To adjust the screen sharpness. You can also
adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]

14. Color (Colour) Temperature (Command: x u)
••To adjust colour temperature. You can also adjust
Color (Colour) Temperature in the PICTURE
menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]

ENGLISH

Ack [j][ ][Set ID][ ][OK/NG][Data][x]

01: Lock on

Data Min: 00 to Max: 64

Data Min: 00 to Max: 32

Ack [u][ ][Set ID][ ][OK/NG][Data][x]

Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
••To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off

15. Equalizer (Command : j v)
••Adjust EQ of the set.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
MSB
0

LSB
0

0

0

0

0

0

0

01: OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

Frequency

Data

7

6

5

Frequency

4

3

2

1

0

Step

0

0

0

1st Band

0

0

0

0

0

0(decimal)

0

0

1

2nd Band

0

0

0

0

1

1(decimal)

0

1

0

3rd Band

...

...

...

...

...

...

0

1

1

4th Band

1

0

0

1

1

19(decimal)

1

0

0

5th Band

1

0

1

0

1

20(decimal)

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
-- Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.

23

16. Key (Command: m c)
••To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - page 17.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
17. C
 ontrol Backlight, Control Panel Light
(Command: m g)
* For LCD TV / LED TV
••To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]

19. 3
 D (Command: x t) (only 3D models)
(Depending upon model)
••To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ]
[Data 01] [ ][Data 02][ ][Data 03][Cr]
* (Depending upon model)
Data
Structure
[Data 00]

[Data 01]

Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* For Plasma TV
••To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]

[Data 02]
[Data 03]

Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

18. I nput select (Command: x b)
(Main Picture Input)
••To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV
02: Satellite DTV
ISDB-BS (Japan)
03: ISDB-CS1 (Japan)
04: ISDB-CS2 (Japan)
11: CATV
20: AV or AV1
40: Component1
60: RGB
90: HDMI1
92: HDMI3

01:

CADTV

10:

ATV

21:
41:
91:
93:

AV2
Component2
HDMI2
HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.

24

00: 3D On
01: 3D Off
02: 3D to 2D
03: 2D to 3D
00: Top and Bottom
01: Side by Side
02: Check Board
03: Frame Sequential
04: Column interleaving
05: Row interleaving
00: Right to Left
01: Left to Right
3D Effect(3D Depth): Min: 00 - Max:
14 (*transmit by Hexadecimal code)

* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off ) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03 (2D to 3D), [Data 01] and [Data
02] have no meaning.
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 00]

[Data 01]

[Data 02]

[Data 03]

00

O

O

O

01

X

X

X

02

X

X

X

03

X

O

O

X: don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x] [t][ ][Set ID][ ][NG][Data00][x]

20. E xtended 3D(Command: x v) (only 3D models)
(Depending upon model)
••To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]

ENGLISH

3D option
00: 3D Picture Correction
01: 3D Depth (3D Mode is Manual
Only)
02: 3D Viewpoint
06: 3D Color Correction
07: 3D Sound Zooming
08: Normal Image View
09: 3D Mode (Genre)
[Data 01]
It has own range for each 3D
option determined by [Data 00].
1) When
[Data 00] is 00
00: Right to Left
01: Left to Right
2) When
[Data 00] is 01, 02
Data Min: 0 - Max: 14 (*transmit by
Hexadecimal code)
Data value range(0 - 20) converts Viewpoint
range (-10 - +10) automatically (Depending
upon model)
* This option works when 3D Mode (Genre) is
manual only.
3) When
[Data 00] is 06, 07
00: Off
01: On
4) When
[Data 00] is 08
00: Revert to 3D video from 3D-to2D converted 2D video
01: Change 3D video to 2D video,
except 2D-to-3D video
* If conversion condition doesn’t meet,
command is treated as NG.
5) When [Data 00] is 09
00: Standard
01: Sport
02: Cinema
03: Extreme
04: Manual
05: Auto
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]

25

Regulatory
FCC NOTICE

ENGLISH

(For USA)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and the receiver.
-- Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation of the device. Any
changes or modifications in construction of this
device which are not expressly approved by the
party responsible for compliance could void the
user’s authority to operate the equipment.

FCC Radio Frequency Interference
Requirements (for UNII devices)
High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with
and/or damage this device. This device cannot be
co-located with any other transmitter.

26

FCC RF Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be
colocated or operating in conjunction with any
other antenna or transmitter. This equipment
should be installed and operated with minimum
distance 20 cm (7.8 inches) between the radiator
and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.

Industry Canada Statement
(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This device complies with Industry Canada’s
applicable licence-exempt RSSs. Operation is
subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference,
including interference that may cause undesired
operation of the device.

IC Radiation Exposure Statement
(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20 cm (7.8
inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

WARNING

NOTE TO CABLE/TV INSTALLER
(For USA and Canada)
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
to the grounding system of the building, as close
to the point of the cable entry as practical.

WARNING!
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
-- Using cabinets or stands recommended by the
manufacturer of the television set.
-- Only using furniture that can safely support the
television set.
-- Ensuring the television set is not overhanging
the edge of the supporting furniture.
-- Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
-- Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
-- Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.

ENGLISH

(For Canada)
[For product having the wireless function using 5
GHz frequency bands]
••The device for operation in the band 5150–5250
MHz is only for indoor use to reduce the
potential for harmful interference to co-channel
mobile satellite systems;
••For devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the bands 5250-5350 MHz and 5470-5725 MHz
shall be such that the equipment still complies
with the e.i.r.p. limit;
••For devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits
specified for point-to-point and non-point-topoint operation as appropriate; and
••The worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask
requirement set forth in Section 6.2.2(3) shall be
clearly indicated.(devices operating in the band
5250-5350 MHz with a maximum e.i.r.p. greater
than 200 mW)
••High-power radars are allocated as primary users
(i.e. priority users) of the bands 5250–5350 MHz
and 5650–5850 MHz and that these radars could
cause interference and/or damage to LE-LAN
devices.

Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
27

CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on
proper stands or installed according to the manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television
is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder
block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount
installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN
YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the
purchase of a flat-panel television. Special care should be made in the placement of older CRT
televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

CE.org/safety

Declaration of Conformity
Trade Name
LG
Model
43UW660H-UD 49UW970H-UD
49UW660H-UD 55UW970H-UD
55UW660H-UD 65UW970H-UA
65UW660H-UC 75UW970H-UB
Responsible
LG Electronics Inc.
Party
Address
1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL
201-266-2534

The model and serial numbers of the TV are located
on the back and on one side of the TV. Record them
below should you ever need service.
MODEL
SERIAL

LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-888-865-3026
1-855-286-2456

USA, Commercial User
CANADA

OWNER’S MANUAL

EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.

www.lg.com

2

KEY CODES

ENGLISH
ENG

KEY CODES
• This feature is not available for all models.
Code
(Hexa)

Function

Note

Code
(Hexa)

Function

Note

00

CH +, PR +

R/C Button

53

List

R/C Button

01

CH -, PR -

R/C Button

5B

Exit

R/C Button

02

Volume +

R/C Button

60

PIP(AD)

R/C Button

03

Volume -

R/C Button

61

Blue

R/C Button

06

> (Arrow Key / Right Key)

R/C Button

63

Yellow

R/C Button

07

< (Arrow Key / Left Key)

R/C Button

71

Green

R/C Button

08

Power

R/C Button

72

Red

R/C Button

09

Mute

R/C Button

79

Ratio / Aspect Ratio

R/C Button

0B

Input

R/C Button

91

AD (Audio Description)

R/C Button

0E

SLEEP

R/C Button

9E

LIVE MENU

R/C Button

0F

TV, TV/RAD

R/C Button

7A

User Guide

R/C Button

R/C Button

7C

Smart / Home

R/C Button

10 - 19 * Number Key 0 - 9
1A

Q.View / Flashback

R/C Button

7E

SIMPLINK

R/C Button

1E

FAV (Favorite Channel)

R/C Button

8E

►► (Forward)

R/C Button

20

Text (Teletext)

R/C Button

8F

◄◄ (Rewind)

R/C Button

21

T. Opt (Teletext Option)

R/C Button

AA

Info

R/C Button

28

Return (BACK)

R/C Button

AB

Program Guide

R/C Button

30

AV (Audio / Video) Mode

R/C Button

B0

► (Play)

R/C Button

39

Caption/Subtitle

R/C Button

B1

ꕗ (Stop / File List)

R/C Button

40

Λ (Arrow Key / Cursor Up)

R/C Button

B5

RECENT

R/C Button

41

V (Arrow Key / Cursor
Down)

R/C Button

BA

ꕘ (Freeze / Slow Play /
Pause)

R/C Button

42

My Apps

R/C Button

BB

Soccer

R/C Button

43

Menu / Settings

R/C Button

BD

ꔄ (REC)

R/C Button

44

OK / Enter

R/C Button

DC

3D

R/C Button

45

Q.Menu

R/C Button

99

AutoConfig

R/C Button

4C

List, - (ATSC Only)

R/C Button

9F

App / *

R/C Button

4D

PICTURE

R/C Button

9B

TV / PC

R/C Button

52

SOUND

R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)

EXTERNAL CONTROL DEVICE SETUP

3

• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.

USB to Serial converter with USB Cable

USB IN

USB Type

(PC)

(TV)

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.

(TV)

(PC)

USB IN

RS-232C With RS232C Cable

(PC)

(TV)

SERVICE ONLY

DE9 (D-Sub 9pin) Type
1
• You need to purchase the RS-232C (DE9, D-Sub
3 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.

(PC)

2

RS-232C IN

(CONTROL & SERVICE)

(PC)

SERVICE ONLY

1

3

RS-232C IN

(CONTROL & SERVICE)

2

(PC)

(TV)

1

3

(PC)
The connection interface may differ from your TV.

(TV)

2

(TV)
(TV)

1

3

(PC)

RS-232C IN

2
RS-232C IN

(CONTROL & SERVICE)

RS-232C IN

(CONTROL & SERVICE)

(CONTROL & SERVICE)

(TV)

ENGLISH
ENG

EXTERNAL CONTROL DEVICE SETUP

USB USB
IN IN

4

EXTERNAL CONTROL DEVICE SETUP

(PC)
(PC)

(TV)
(TV)

RS-232C IN

(CONTROL
SERVICE)
• You need to purchase the phone-jack to RS-232 cable required
for &the
connection between the PC and
the TV, which is specified in the manual.
RS-232C IN

(PC)
(PC)

(CONTROL & SERVICE)

* For other models, connect to the USB port.
* The connection interface may differ from your TV.
1

3

(PC)
(PC)

1

3
2
2

- or

(TV)
(TV)
(TV)
(TV)

1

3

(PC)
(PC)

SERVICE
ONLY ONLY
SERVICE

ENGLISH
ENG

Phone jack Type

1

3

RS-232C IN

(CONTROL & SERVICE)

2

RS-232C IN

(CONTROL & SERVICE)

2

Customer Computer

(TV)
(TV)

RS-232C configurations
3-Wire Configurations(Not standard)

1

5

PC
RXD

RS-232C IN

(CONTROL & SERVICE)

TXD

RS-232C IN

(CONTROL & SERVICE)

GND

6

2

2

TXD

3

1

RXD

5

3

GND

OR

9
RS-232C
(Serial port)

TV

RXD

3

2

TXD

TXD

2

1

RXD

GND

5

3

GND

D-Sub 9

Phone

Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
* (Depending on model)

EXTERNAL CONTROL DEVICE SETUP

5

• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None

ENGLISH
ENG

Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.

Command reference list
(Depending on model)
COMMAND1 COMMAND2

DATA
(Hexadecimal)

01. Power*

k

a

00 to 01

02. Aspect
Ratio

k

c

(p.7)

03. Screen
Mute

k

d

(p.7)

k

e

00 to 01

k

f

00 to 64

06. Contrast

k

g

00 to 64

07.
Brightness

k

h

00 to 64

08. Color/
Colour

k

i

00 to 64

09. Tint

k

j

00 to 64

k

00 to 32

l

00 to 01

m

00 to 01

04. Volume
Mute
05. Volume
Control

10.
k
Sharpness
11. OSD
k
Select
12. Remote
Control Lock k
Mode
13. Treble

k

r

00 to 64

14. Bass

k

s

00 to 64

COMMAND1 COMMAND2

DATA
(Hexadecimal)

15. Balance k
16. Color
(Colour)
x
Temperature
17. ISM
Method (Only j
Plasma TV)

t

00 to 64

u

00 to 64

p

(p.8)

18. Equalizer j

v

(p.8)

q

00 to 05

a

(p.9)

b

00 to 01

19. Energy
j
Saving
20. Tune
m
Command
21. Channel m
(Programme)
Add/Del(Skip)
22. Key

m

c

Key Codes

23. Control
Backlight,
Control Panel
Light
24. Input
select (Main)
25. 3D (Only
3D models)
26. Extended
3D (Only 3D
models)
27. Auto
Configure

m

g

00 to 64

x

b

(p.11)

x

t

(p.11)

x

v

(p.12)

j

u

(p.12)

* Note:	During playing or recording media, all commands except Power (ka) and Key (mc) are not
executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.

6

EXTERNAL CONTROL DEVICE SETUP

ENGLISH
ENG

Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:	You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
		* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA]
: To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr]
: Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...

32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...

FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...

EXTERNAL CONTROL DEVICE SETUP

7

01. Power (Command: k a)
►► To control Power *On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off

01 : *Power On

Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.

02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
	(Latin America
(Europe, Colombia, Midexcept Colombia
East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : Cinema Zoom 1 to 16
Original
0c : 21:9 (Depending on model)
Ack [c][ ][Set ID][ ][OK/NG][Data][x]

Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.

04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]

* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.

07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64

03. Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on

Ack [h][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH
ENG

* Commands may work differently depending on model and signal.

8

EXTERNAL CONTROL DEVICE SETUP

ENGLISH
ENG

08. Color/Colour (Command: k i)

13. Treble (Command: k r)

►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.

►► To adjust treble.
You can also adjust in the AUDIO menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]

09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0
 0 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]

Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)

14. Bass (Command: k s)
►► To adjust Bass.
You can also adjust in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64

10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]

Ack [s][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)

15. Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]

Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off

01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off

01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.

16. Color(Colour) Temperature (Command: x u)
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]

17. ISM Method (Command: j p) (Only Plasma TV)
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]

EXTERNAL CONTROL DEVICE SETUP

* Analog Antenna/Cable

►► Adjust EQ of the set.
Transmission [j][v][ ][Set ID][ ][Data][Cr]

MSB
0

[Data 00][Data 01] Channel Data
Data 00 : High byte channel data
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)

LSB
0

0

0

0

Frequency

0

0

0

Data 02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)

Data

7

6

5

Frequency

4

3

2

1

0

Step

0

0

0

1st Band

0

0

0

0

0

0(decimal)

0

0

1

2nd Band

0

0

0

0

1

1(decimal)

0

1

0

3rd Band

...

...

...

...

...

...

0

1

1

4th Band

1

0

0

1

1

19(decimal)

1

0

0

5th Band

1

0

1

0

1

20(decimal)

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

* It depends on model, and can adjust when sound
mode is EQ adjustable value.

19. Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]

20. Tune Command (Command: m a)
* This command may work differently depending on
model and signal.

• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]

* Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data 02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
* Tune Command Examples:
1. Tune to the Analog antenna (PAL) Channel 10.
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2. Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]

• For South Korea, North/Latin America except
Colombia Model

►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.

ENGLISH
ENG

18. Equalizer (Command : j v)

9

10 EXTERNAL CONTROL DEVICE SETUP

ENGLISH
ENG

* Analog Antenna/Cable
Data 00 : Physical Channel Number
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don't care)
Data 03 & 04: xx (Don't care)
Data 05: Input Source (Analog)
- 00 : Antenna TV (ATV)
- 01 : Cable TV (CATV)

2.	Tune to the digital antenna (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]

• For Japan Model

* Digital Antenna/Cable

►► To tune channel to following physical/major/minor
number.

Data 00 : xx (Don't care)

Transmission [m][a][ ][0][ ][Data00][ ][Data01]

[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data 03 : High byte Channel Data
Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
Number
- 22 : Antenna TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Physical/Major
Channel Number Only (One Part Channel)
- 66 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
- 0b : Cable DTV Plus – Use Physical Channel
Number
- 2b : Cable DTV Plus – Don’t Use Physical
Channel Number
- 4b : Cable DTV Plus – Use Physical/Major
Channel Number Only (One Part Channel)
- 6b : Cable DTV Plus – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
* Tune Command Examples:
1.	Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Antenna/Satellite
Data 00: xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
- 42 : Antenna TV (DTV) – Use Physical/Major
Channel Number Only (One Part Channel)
- 62 : Antenna TV (DTV) – Use Major Channel
Number Only (One Part Channel)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02

EXTERNAL CONTROL DEVICE SETUP

►► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]

* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]

21. Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.

22. Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]

23. Control Backlight (Command: m g)
• For LCD TV / LED TV

►► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)

• For Plasma TV

►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]

Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1

21 : AV2

40 : Component1
60 : RGB

41 : Component2

90 : HDMI1
92 : HDMI3

91 : HDMI2
93 : HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.

25. 3D(Command: x t) (only 3D models)
(Depending on model)
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]

* (Depending on model)

Data Structure
[Data 00]	00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]	00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]	00 : Right to Left
01 : Left to Right
[Data 03]	3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)

ENGLISH
ENG

24. Input select (Command: x b)
(Main Picture Input)

2. Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07

Data 00 : Del(ATSC,ISDB)/Skip(DVB)

11

12 EXTERNAL CONTROL DEVICE SETUP

ENGLISH
ENG

* [Data 02], [Data 03] functions depend on model
and signal.
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.

3) When	[Data 00] is 06, 07
00 : Off
01 : On

* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.

4) When	[Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 2D video
		 01 : Change 3D video to 2D video, except
2D-to-3D video
* If conversion condition doesn’t meet, command is
treated as NG.

* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.

5) When [Data 00] is 09

* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03 (2D to 3D), [Data 01] and
[Data 02] have no meaning.

00 : Standard
02 : Cinema
04 : Manual

01 : Sport
03 : Extreme
05 : Auto

[Data 00]

[Data 01]

[Data 02]

[Data 03]

00

O

O

O

01

X

X

X

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]

02

X

X

X

[v][ ][Set ID][ ][NG][Data00][x]

03

X

O

O

X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]

26. Extended 3D(Command: x v) (only 3D models)
(Depending on model)
►► To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]	3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01]	It has own range for each 3D option
determined by [Data 00].
1) When	[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When	[Data 00] is 01, 02
Data		Min: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual
only.

27. Auto Configure (Command: j u)
(Depending on model)
►► To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set Auto Configure
Ack [u][ ][Set ID][ ][OK/NG][Data][x]

LED TV

ENGLISH
Easy Setup Guide
Please read this manual carefully before operating your set and retain it for future reference.
ESPAÑOL
Guía Rápida de Configuración
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
FRANÇAIS
Guide de configuration rapide
Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter
ultérieurement.

43UW660H
49UW660H
55UW660H

a

AAA

b

c X4
(M4 x L20)

www.lg.com

d X4
(M4 x L12)

X2

AAA

X2

X2

X2

P/No: MFL69354916 (1607-REV00)

AAA

ENGLISH

Read Safety & Reference.

ESPAÑOL

Leer Seguridad y Consultas.

FRANÇAIS Lisez Sécurité et références.

1

2

3
c
a

b

4

6

5

a

b

d

ENGLISH

Image shown may differ from your TV.

ESPAÑOL

La imagen puede ser diferente a la de su televisor.

FRANÇAIS Cette illustration peut ne pas correspondre à votre téléviseur.

1

2

3

4

ENGLISH
0

1

MODELS

2

Dimensions
(W x H x D)

With stand
Without stand

With stand
Without stand
Power requirement
Weight

Current Value /
Power consumption

43UW660H
(43UW660H-UD)
973 x 622 x 303 (mm)
38.3 x 24.4 x 11.9 (inches)
973 x 572 x 77.2 (mm)
38.3 x 22.5 x 3.0 (inches)
12.8 kg (28.2 lbs)
9.5 kg (20.9 lbs)

49UW660H
(49UW660H-UD)
1,106 x 694 x 303 (mm)
43.5 x 27.3 x 11.9 (inches)
1,106 x 646 x 77.2 (mm)
43.5 x 25.4 x 3.0 (inches)
15.3 kg (33.7 lbs)
12.0 kg (26.4 lbs)

55UW660H
(55UW660H-UD)
1,240 x 769 x 303 (mm)
48.8 x 30.2 x 11.9 (inches)
1,240 x 721 x 60.9 (mm)
48.8 x 28.3 x 2.3 (inches)
19.8 kg (43.6 lbs)
16.5 kg (36.3 lbs)

AC 100 - 240 V ~ 50 / 60 Hz
1.0 A / 100 W

1.2 A / 120 W

1.4 A / 140 W

ESPAÑOL / FRANÇAIS
MODELOS
MODÈLES
Dimensiones
Con base
(Ancho x altura x
Avec support
profundidad)
Dimensions
(L x H x P)
Peso
Poids
Alimentación
requerida

Sin base
Sans support
Con base
Avec support
Sin base
Sans support

43UW660H
(43UW660H-UD)

49UW660H
(49UW660H-UD)

55UW660H
(55UW660H-UD)

973 x 622 x 303 (mm)
38,3 x 24,4 x 11,9
(pulgadas / po)

1 106 x 694 x 303 (mm)
43,5 x 27,3 x 11,9
(pulgadas / po)

1 240 x 769 x 303 (mm)
48,8 x 30,2 x 11,9
(pulgadas / po)

973 x 572 x 77,2 (mm)
38,3 x 22,5 x 3,0
(pulgadas / po)

1 106 x 646 x 77,2 (mm)
43,5 x 25,4 x 3,0
(pulgadas / po)

1 240 x 721 x 60.9 (mm)
48,8 x 28,3 x 2,3
(pulgadas / po)

12,8 kg (28,2 libras / lb)

15,3 kg (33,7 libras / lb)

19,8 kg (43,6 libras / lb)

9,5 kg (20,9 libras / lb)

12,0 kg (26,4 libras / lb)

16,5 kg (36,3 libras / lb)

Alimentation

Corriente de consumo /
Consumo de potencia
Valeur courante /
Consommation électrique

AC 100 - 240 V ~ 50 / 60 Hz

1,0 A / 100 W

1,2 A / 120 W

1,4 A / 140 W

*MFL69354916*
(For USA and Canada only)
(Para Estados Unidos y Canadá)
This product qualifies for ENERGY
STAR® in the factory default (Home
configuration) setting. Changing the
factory default settings or enabling
other features may increase power consumption
that could exceed the limits necessary to quality
for ENERGY STAR®. Refer to ENERGYSTAR.gov
for more information on the ENERGY STAR®
program.

(Pour les États-Unis et le Canada)
Ce produit est conforme aux normes
ENERGY STAR® lorsque le « réglage
d’usine par défaut (Résidentiel) » est
sélectionné. Modifier les réglages
d’usine par défaut ou activer d’autres
fonctionnalités augmente la consommation
d’énergie qui pourrait alors dépasser les limites
de la qualification ENERGY STAR®. Consultez le
site ENERGYSTAR.gov pour en savoir plus au
sujet du programme ENERGY STAR®.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:02:21 20:37:02+09:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2017:09:04 13:10:36-05:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:09:04 13:10:36-05:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:7016f7d7-5a6b-4b74-962c-a58fb7da7e98
Original Document ID            : xmp.did:5A58E8AB4542E611B546DB5FC403A3CE
Document ID                     : xmp.id:4BA06B9729F8E6119AE68358EF1B0B6C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4AA06B9729F8E6119AE68358EF1B0B6C
Derived From Document ID        : xmp.did:5F98C17E674EE61180C4DA3957479ED0
Derived From Original Document ID: xmp.did:5A58E8AB4542E611B546DB5FC403A3CE
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:02:21 20:37:02+09:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 53

EXIF Metadata provided by EXIF.tools