LG DLEC888W MFL67653090_en_160713 User Manual DRYER Manuals And Guides 1610057L

User Manual: LG DLEC888W DLEC888W LG DRYER - Manuals and Guides View the owners manual for your LG DRYER #DLEC888W. Home:Laundry & Garment Care Parts:LG Parts:LG DRYER Manual

Open the PDF directly: View PDF .
Page Count: 34

DRYER

OWNER’S MANUAL

Please read this manual carefully before operating

your dryer and retain it for future reference.

DLEC888W

DLEC888R

MFL67653090

Ultra Big Capacity Drum

The LG Dryer has a large capacity.

Reduced drying time

Drying time is reduced by the use of an efficient air flow system and

an optimized heater.

Innovative Noise Reduction

The optimized design of the air flow system and the vibration reduction

technology helps to reduce noise.

Ease of Use

The electronic control has a large, easy to read LED display.

Your dryer provides sensor drying and manual drying programs.

Sensor Dry Dryer electronically senses laundry moisture level and automatically determines operation time

based on the dryness of the load and the selected program. The control will change the estimated time

remaining if it senses a large change in the time needed to complete the cycle. These large increases or

decreases in the time display are normal, and do not indicate a product malfunction.

Manual Dry Manual Dry allows you to set the desired dry time manually. Certain types of loads, such as

large and/or bulky loads, may not dry properly using Sensor Dry. These loads should be dried using the

Manual Dry feature to ensure complete drying.

What are Sensor Dry and Manual Dry?

ontents

eatures

Safety Instructions .................................................................................. 3

Installation Instructions ............................................................................ 7

Electrical Requirement .......................................................................... 11

Appearance And Design ....................................................................... 14

Operating Your Dryer ............................................................................ 15

Additional Functions............................................................................... 18

Caring For Your Dryer ........................................................................... 22

Additional Tips For Smart Use .............................................................. 25

Troubleshooting Guide .......................................................................... 27

Technical Data ....................................................................................... 32

Warranty ................................................................................................ 33

Safety Instructions

afety Instructions

READ ALL INSTRUCTIONS BEFORE USE

BASIC SAFETY PRECAUTIONS

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey

all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

DANGER:

You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING:

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell

you what can happen if the instructions are not followed.

WARNING

For your safety, the information in this manual must be followed to minimize the

risk of fire or explosion, electric shock, or to prevent property damage, personal

injury, or loss of life.

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following:

• Do not install a clothes dryer with flexible

plastic venting materials. If flexible metal (foil

type) duct is installed, it must be of a specific

type identified by the appliance manufacturer as

suitable for use with clothes dryers. Flexible

venting materials are known to collapse, be

easily crushed, and trap lint. These conditions

will obstruct clothes dryer airflow and increase

the risk of fire.

• Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this

appliance or any other appliances.

• Installation and service must be performed by a

qualified installer, service agency, or the gas

supplier.

• Install the clothes dryer according to the

manufacturer’s instructions and local codes.

• Save these instructions.

• Certain internal parts are intentionally not grounded

and may present a risk of electronic shock only

during serving.

Service personnel - do not contact the following

parts while the appliance is energized: Motor

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of

malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least

resistance for electric current. This appliance must be

equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local

codes and ordinances.

Do not modify the plug provided with the appliance. If it

will not fit the outlet, have a proper outlet installed by a

qualified electrician.

This appliance must be connected to a grounded metal,

permanent wiring system or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead

on the appliance. Electrical shock can result if the dryer

is not properly grounded.

Safety Instructions

afety Instructions

• Read all instructions before using the dryer.

• Before use, the dryer must be properly

installed as described in this manual.

• Do not place items exposed to cooking oils in

your dryer. Items contaminated with cooking

oils may contribute to a chemical reaction that

could cause a load to catch fire.

• Do not dry articles that have been previously

cleaned in, washed in, soaked in, or spotted

with gasoline, dry-cleaning solvents, or other

flammable or explosive substances as they

give off vapors that could ignite or explode.

• Do not reach into the dryer if the drum or any

other part is moving.

• Do not repair or replace any part of the dryer

or attempt any servicing unless specifically

recommended in this Use and Care Guide or

in published user-repair instructions that you

understand and have the skills to carry out.

• Do not tamper with controls.

• Before the dryer is removed from service or

discarded, remove the door to the drying

compartment.

• Do not allow children to play on or in the dryer.

Close supervision of children is necessary

when the dryer is used near children.

• Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

• Do not use heat to dry articles containing foam

rubber or similarly textured rubber-like

materials.

• Keep area around the exhaust opening and

adjacent surrounding areas free from the

accumulation of lint, dust, and dirt.

• The interior of the dryer and exhaust vent

should be cleaned periodically by qualified

service personnel.

• Do not install or store the dryer where it will be

exposed to the weather.

• Always check the inside of the dryer for foreign

objects.

• Clean lint screen before or after each load.

• Do not spray dry cleaning detergent directly

onto the product or use the product to dry

clothes that have dry cleaning detergent on

them. Doing so could result in an explosion or

fire.

• Do not dry clothes that are stained with

combustible or flammable materials. Doing so

could result in an explosion or fire. Flammable

materials include thinners, benzene, solvents,

cleaning solutions, acetone, alcohol, gasoline,

turpentine, wax, wax removers, hair gel,

hairspray, edible oils, motor oil, creams,

cosmetic products and lotions, and oil stains.

• Do not dry clothes stained with oily

substances. Oily substances (including edible

oils) on clothes cannot be completely removed

even by washing with water, and the remaining

oil could result in a fire if dried.

• Remove clothes promptly from the dryer after

the cycle ends or if there is a power outage

during the cycle. Do not store clothing in the

dryer.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following:

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or service person if you are in

doubt as to whether the appliance is properly grounded.

Safety Instructions

afety Instructions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following:

SAFETY INSTRUCTIONS FOR INSTALLATION

•Properly ground dryer to conform with all

governing codes and ordinances. Follow

details in the installation instructions. Electrical

shock can result if the dryer is not properly

grounded.

•Before use, the dryer must be properly

installed as described in this manual.

Electrical shock can result if the dryer is not

properly grounded.

•Install and store the dryer where it will not

be exposed to temperatures below freezing

or exposed to the weather.

•All repairs and servicing must be performed

by an authorized servicer unless

specifically recommended in this Owner’s

Guide. Use only authorized factory parts.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• To reduce the risk of electric shock, do not

install the dryer in humid spaces. Failure to

follow this warning can cause serious injury,

fire, electrical shock, or death.

• Connect to a properly rated, protected, and

sized power circuit to avoid electrical

overload. Improper power circuit can melt,

creating electrical shock and/or fire hazard.

• Remove all packing items and dispose of all

shipping materials properly. Failure to do so

can result in death, explosion, fire, or burns.

• Place dryer at least 18 in. above the floor for

a garage or basement installation. Failure to

do so can result in death, explosion, fire, or

burns.

• Keep all packaging from children. Packaging

material can be dangerous for children. There is

a risk of suffocation.

• Do not install nearby heat item. Such as

stove, cooking oven. Failure to do so can cause

damage, smoke, and fire.

• Do not place candle and cigarettes on top of

the product. Failure to do so can cause

damage, smoke, and fire.

• Remove all protective vinyl film from the

product. Failure to do so can cause damage,

smoke, and fire.

• Certain internal parts are intentionally not

grounded and may present a risk of electronic

shock only during serving.

Service personnel - do not contact the following

parts while the appliance is energized: Motor

READ ALL INSTRUCTIONS BEFORE USE

Safety Instructions

afety Instructions

SAVE THESE INSTRUCTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following:

• Do not, under any circumstances, cut or

remove the ground prong from the power cord.

To prevent personal injury or damage to the

dryer, the electrical power cord must be

plugged into a properly grounded outlet.

• For personal safety, this dryer must be properly

grounded. Failure to do so can result in

electrical shock or injury.

• Refer to the installation instructions in this

manual for specific electrical requirements for

your model. Failure to follow these instructions

can create an electrical shock hazard and/or a

fire hazard.

• This dryer must be plugged into a properly

grounded outlet. Electrical shock can result if

the dryer is not properly grounded. Have the

wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly

grounded. Failure to follow these instructions

can create an electrical shock hazard and/or a

fire hazard.

• The dryer should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating plate.

This provides the best performance and also

prevents overloading house wiring circuits

which could cause a fire hazard from

overheated wires.

• Never unplug your dryer by pulling on the

power cord. Always grip plug firmly and pull

straight out from the outlet. The power cord can

be damaged, resulting in a risk of fire and

electrical shock.

• Repair or replace immediately all power cords

that have become frayed or otherwise

damaged. Do not use a cord that shows cracks

or abrasion damage along its length or at either

end. The power cord can melt, creating

electrical shock and/or fire hazard.

• When installing or moving the dryer, be careful

not to pinch, crush, or damage the power cord.

This will prevent injury and prevent damage to

the dryer from fire and electrical shock.

SAFETY INSTRUCTIONS FOR INSTALLATION

This act requires the governor of California to publish a list of substances known to the state to cause

cancer, birth defects, or other reproductive harm and requires businesses to warn customers of

potential exposure to such substances.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon

monoxide, formaldehyde, and soot, caused primarily by the incomplete combustion of natural gas or LP

fuels.

Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be

minimized further by properly venting the dryer to the outdoors.

CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT

WARNING:This product contains chemicals known to the State of California to cause cancer and

birth defects or other reproductive harm.

Wash hands after handling.

Installation Instructions

nstallation Instructions

The following instructions will help guide you through the initial steps of setting up your dryer for use.

Please note that every section of this manual provides important information regarding the preparation and use of

your dryer, and it is important that you review this entire manual before proceeding with any installation or use.

More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are

provided in other parts of this manual.

Choose a location with a solid floor for your dryer. Place the dryer at least eighteen inches above the floor for a

garage installation. After placing the dryer in the desired location, make sure that it has the required clearances

shown.

Positioning the Dryer.

Leveling legs should be secured.

All four legs should be on a solid, even floor and properly leveled as shown in this manual.

If dryer is not level, laundry may not be able to accurately detect the moisture level in the clothes.

When leveling, please be cautious to avoid injury.

Note

33 1/2"

(850 mm)

23 5/8"

(600 mm)

25 1/4"

(640 mm)

Installation Instructions

Prior to the first use of this appliance, use all-purpose

cleaning products or a solution of detergent and water,

with a damp cloth to remove from the inside of the

dryer drum/drying compartment any dust or dirt that

may have accumulated in the inside of the dryer. Plug

in your dryer after reviewing the following parts on your

dryer’s Electrical Requirements.

Close the door to the dryer drum/drying

compartment and, after completing all steps in this

manual for proper installation of this dryer, start the

dryer on a heat setting, as described more fully in

the operating instructions that accompany the dryer.

The following instructions are applicable to

installations of the dryer in a manufactured or

mobile home. Any installation in a manufactured

or mobile home must comply with the

Manufactured Home Construction and Safety

Standards Title 24 CFR, Part 32-80 or Standard

CAN/CSA Z240 MH and local codes and

ordinances. If you are uncertain whether your

proposed installation will comply with these

standards, please contact a service and installation

professional for assistance.

1) The electrical connection for an electric dryer

must be a 4-wire connection. More detailed

information concerning the electrical connection

is provided at the manual section entitled

Electrical Requirements for Electric Dryer

Following are several warnings and instructions

concerning making the electrical connection for

electric dryers. More detailed information

concerning the electrical connection is provided at

the manual section entitled Electrical Requirements

For Electric Dryer and it is important that you

thoroughly review that section, and the remainder of

this manual, before taking any steps to install or use

this dryer.

1. Use only a new U.L. listed No. 10 (copper wire

only) conductor power supply cord kit rated 240

Volts (minimum) 30 Amperes and labeled as

suitable for use in a clothes dryer.

2. 4-wire cord is required for manufactured (mobile)

home installations and use and where local codes

do not allow grounding of this appliance through

neutral. As well as all new construction after

January 1, 1996.

3. For additional instruction on connecting the dryer

to an electrical power source, please refer to this

manual’s section on Electrical Requirements for

Electric Dryer.

Confirming Heat Source

Operation

Additional Instructions

for Installation of Your

Dryer in a Manufactured

or Mobile Home

Electrical Connections

nstallation Instructions

Preparation of the Dryer

WARNING

• Use a new UL approved 30 amp power

supply cord or 10 gauge solid copper wire.

• Use a UL approved strain relief.

• Disconnect power before making electrical

connections.

• Connect neutral wire (white or center) to

center terminal.

• Ground wire (green or bare) must be

connected to green ground connector.

• Securely tighten all electrical connections

• See installation instructions for complete

instructions.

• A 4-wire connection is required for all

mobile and manufactured home

installations, as well as all new construction

after January 1, 1996.

• Failure to do so can result in fire or

electrical shock.

Installation Instructions

nstallation Instructions

Shape

and

assembly

direction

21 7/8inch

(550mm)

Washer Top plate size

23 5/8inch

(600mm)

Stacking Kit

In order to stack this dryer an LG stacking kit is

required.

This dryer may only be stacked on top of an LG

washer. DO NOT attempt to stack this dryer on any

other washer, as damage, injury or property damage

could result.

Installation Procedure

1. Place the LG dryer on the LG washing machine.

2. Remove the two screws from the bottom of the rear

cover on each side as illustrated below.

3. Align the stacking kit holes and the rear cover

holes.

3-1) 23 5/8inch(600mm)

3-2) 21 7/8inch(550mm)

• Fasten the 2 screws that were removed earlier

from the dryer to the stacking kit.

• Use 4 screws in accessory box [0.6inch(16mm)]

to assemble washer rear cover and stacking kit.

• The procedure for the opposite side will be the

same.

WARNING

• Incorrect installation can cause serious

accidents.

• The weight of the dryer and the height of

installation makes the stacking procedure

too risky for one person. This procedure

should be performed by 2 or more

experienced service personnel.

• The dryer is not suitable for a built-in

installation. Please do not install as a built-

in appliance.

• Do not operate if the dryer is disassembled.

Dryer

Washer

Installation Instructions

Level the dryer

1. Level the dryer is to prevent undesirable noise

and vibration.

Locate your dryer on a solid, level floor. Make

sure it is not subjected to splashing water or

freezing temperatures. Do not store flammable

materials near the dryer.

2. If the dryer is not properly level, adjust the front

leveling legs up and down as necessary.

Turn the legs clockwise to raise the dryer and

counterclockwise to lower the dryer. Check the

dryer diagonally to make sure it does not rock

either way. Readjust the legs if necessary.

Diagonal Check

When pushing down corners of the dryer,

the machine should not move at all.

(Check in either direction.)

If machine rocks when pushing the machine top plate

diagonally, adjust the feet again.

Adjustable feet

Adjustable feetAdjustable feet

Raise Lower

nstallation Instructions

❊

Electrical Requirement For Electric Dryers

lectrical Requirement

CONNECTING ELECTRIC DRYERS

Special Electrical Requirements for

Mobile or Manufactured Homes

•This dryer must be connected to a grounded metal,

permanent wiring system, or an equipment-

grounding conductor must be run with the circuit

conductors and connected to the equipment-

grounding terminal or lead on the dryer. Failure to do

so can result in fire, explosion, or death.

•The dryer has its own terminal block that must be

connected to a separate 240 VAC, 60-Hertz,

single-phase circuit, fused at 30 amperes (the circuit

must be fused on both sides of the line.)

ELECTRICAL SERVICE FOR THE DRYER SHOULD

BE OF THE MAXIMUM RATE VOLTAGE LISTED ON

THE NAMEPLATE. DO NOT CONNECT DRYER TO

110-, 115-, OR 120-VOLT CIRCUIT. Heating elements

are available for field installation in dryers which are

to be connected to an electrical service of a different

voltage than that listed on the rating plate. Failure to

follow these instructions can result in fire, explosion, or

death.

•If branch circuit to dryer is 15 ft. (4.5 m) or less in

length, use UL (Underwriters Laboratories) listed No.-

10 AWG wire (copper wire only), or as required by

local codes. If over 15 ft. (4.50 m), use UL-listed

No.-8

AWG wire (copper wire only), or as required by local

codes. Allow sufficient slack in wiring so dryer can be

moved from its normal location when necessary.

Failure to do so can result in fire, explosion, or death.

•The power cord (pigtail) connection between wall

receptacle and dryer terminal block IS NOT supplied

with dryer. Type of pigtail and gauge of wire must

conform to local codes and with instructions on the

following pages. Failure to follow these instructions can

result in fire, explosion, or death.

•A 4-wire connection is required for all mobile and

manufactured home installations, as well as all new

construction after January 1, 1996. A 4-wire

connection must be used where local codes do not

permit grounding through the neutral wire. Failure to

do so can result in fire, explosion, or death.

• Do not modify the plug and internal wire provided with

the dryer.

• If it does not fit the outlet, a proper outlet will need to be

installed by a qualified electrician.

• Any installation in a manufactured or mobile home

must comply with the Manufactured Home

Construction and Safety Standards Title 24 CFR, Part

32-80 or Standard CAN/CSA Z240 MH and local

codes and ordinances.

•A 4-wire connection is required for all mobile and

manufactured home installations, as well as all

new construction after January 1, 1996.

Failure to do so can result in fire, explosion, or death.

WARNING

To help prevent fire, electric shock, serious

injury, or death, the wiring and grounding

must conform to the latest edition of the

National Electrical Code, ANSI/NFPA 70 and

all applicable local regulations. Please

contact a qualified electrician to check your

home’s wiring and fuses to ensure that your

home has adequate electrical power to

operate the dryer.

WARNING

To reduce the risk of fire, electric shock, or

injury to persons when using this appliance,

follow basic precautions, including the

following: WARNING

To reduce the risk of fire, electric shock, or

injury to persons when using this appliance,

follow basic precautions, including the

following:

Electrical Requirement For Electric Dryers

lectrical Requirement

Use the instructions in this section if your home has

a 3-wire receptacle (NEMA type 10-30R) and you

will be using a UL listed, 120/240 volt minimum, 30

amp, dryer power supply cord.

Review the following options to determine the appropriate electrical

connection for your home:

Use the instructions in this section if your home has

a 4-wire receptacle (NEMA type 14-30R) and you

will be using a UL listed, 120/240 volt minimum, 30

amp, dryer power supply cord.

4-wire receptacle

(NEMA type14-30R)

3-wire receptacle

(NEMA type10-30R)

• Be sure the screws of the terminal block are

tightened firmly. Failure to properly tighten the

screws can result in fire, or property damage.

• If you are not sure of the power supply wires or

cannot tell which are hot and neutral, consult a

qualified electrician.

• If you are not sure if your electric outlet is wired

properly, consult a qualified electrician.

Connecting the power supply incorrectly can

result in product damage, fire, injury or death.

• Direct wiring is not permitted by code in most

locations. It is the customer's responsibility to

ensure that the installation meets all local codes.

Note

1. Connect neutral wire (white) of power cord to center

terminal block screw.

2. Connect red and black wire to the left and right

terminal block screws.

3. Connect ground wire (green) of power cord to

external ground screw and move neutral ground wire

of appliance and connect it to center screw.

4. Make sure that the strain relief screw is tightened and

be sure that all terminal block nuts are on tight and

power cord is in right position.

• lf your local codes or ordinances do not allow the

use of a 3 wire connection, or you are installing

your dryer in a mobile home, you must use a 4-

wire connection.

4-Prong plug

: 4-wire connection with

a Power supply cord.

Electrical Requirement For Electric Dryers

lectrical Requirement

1. Connect neutral wire (white) of power cord to

center terminal block screw.

2. Connect ground wire of appliance and neutral

wire of power cord to center terminal block screw.

3. Connect red and black wire to the left and right

terminal block screws.

4. Make sure that the strain relief screw is tightened.

and be sure that all terminal block nuts are on

tight and power cord is in right position.

lf your local codes or ordinances permit the

connection of a frame-grounding conductor to the

neutral wire, use these instructions. If your local

codes or ordinances do not allow the connection of

a frame-grounding conductor to the neutral wire,

use the instructions under

Section 3: Optional 3-wire connection.

: 3-Wire Connection with

a Power Supply Cord

• If your local codes or ordinances do not allow the

connection of a frame-grounding conductor to the

neutral wire, use the instructions under this

section.

: Optional 3-wire

connection.

Appearance And Design

ppearance And Design

Control Panel

Additional Function Buttons

• More Time • Time Delay

• Less Time • Custom PGM

• Option • Wrinkle Care

• Signal • Drum Light

LED Display

• Time Display

• Indicator Lamps

Control Panel

Start/Pause

Power

Cycle Selector Knob

Water Container

Door

Condenser Cover

Air Ventilation Grill

Operating Your Dryer

perating Your Dryer

Cycle Selection Table

CAUTION

If the load is less than 2.2lbs (1kg), please use Warm Air cycle in MANUAL DRY cycles

Use the Wool cycle for wool items and the Delicates cycle for heat-sensitive fabrics including silk,

underwear and lingerie.

Be sure to follow the recommended load sizes when washing fabrics that need special care (see

page 25) or clothes will not dry properly.

Cotton

Mixed Fabrics

Cool Air

Sports Wear

Wool

Easy Care

Delicates

Warm Air

Quick Dry

Gentle Air

Soft Care

Jeans

Bulky Items

SENSOR DRY CYCLES

Very

Normal

Damp

Normal

Less

Damp

Normal

Damp

Drying

Level

High

Medium

High

Medium

Low

Ultra Low

High

Adjustable

Ultra Low

Medium

High

Medium

High

Temp.

Quilts, small comforters and

blankets For thick and quilted fabrics

Terry towels, tea towels,

towels, bed linen For thick and quilted fabrics which do not need to be ironed

Shirts, T-shirts, trousers,

under-wear and socks For polyamide, acrylic, and polyester that do not need to be

ironed

Shirts, T-shirts, under-wear,

anoraks and socks For polyamide, acrylic, polyester that do need to be ironed

Bath towels, tea towels,

underwear, cotton socks For fabrics which do not need to be ironed

Sheets, pillowcase, towels For fabrics which do not need to be ironed

Bed linen, table linen, towels,

T-shirts, polo shirts, and work

clothes For fabrics which do need to be ironed

Bed linen, table linen,

tracksuits, parka, blankets For thick and quilted fabrics which do not need to be ironed

A kind of linen and towel

except for the special fabrics

For the small loads of qualified fabrics with short drying times

Shirts, blouses For fabrics which do not need to be ironed

Trousers, dresses, skirts,

blouses For fabrics which do need to be ironed

All fabrics that need to be fluffed without heat

Athletic uniform, training wear

Wool

For polyester material

For wool fabrics

Silk, Women's thin clothes,

lingerie For fabrics which are heat-sensitive like synthetic fabrics

Bath towels, bath robes,

dishclothes, quilted fabrics

made of acrylic

Small clothes and pre-dried laundry normal fabrics using hot

temperature

Silk, wool, delicate lingerie Refreshes clothes without tumble drying

(It can use the dryer rack.)

T-shirts, pillowcase, and

towels

For cotton fabrics which do not need to be ironed

Jeans and colour fading

garments. For jeans which do not need to be ironed

Bed clothes, sheets For bulky items

MANUAL DRY CYCLES

Operating Your Dryer

perating Your Dryer

BEFORE YOU USE YOUR DRYER

1. When unpacking your dryer, make sure there is no visible damage to the machine.

2. Follow the installation instructions and use a level to ensure proper installation.

3. Check the water reservoir, condenser, door, gasket and drum for signs of damage.

4. Run the dryer for a few minutes to make sure it is heating properly.

1. Turn power on.

First, press the Power button. The indicator light

above the button will become illuminated,

indicating that the machine is ready set to run.

2. Open the door.

3. Check the lint filter, water

container, and condenser.

The lint filter near the door, should be emptied

before drying operation.

Open and check if lint filter is cleaned.

If not, clean it referring to page 22.

For better drying results, make sure the water

container and condenser are also empty and

clean.

4. Place laundry into the drum after

sorting.

The clothes should be sorted by fabric type and

dryness level and all the strings and belts of

clothes should be secured before being put into

the drum.

Push the laundry all the way back to keep it away

from the door seal.

If not, the door seal and clothes may be damaged.

Turn the

dryer on.

Open the

door.

Check the

lint filter.

Operating Your Dryer

perating Your Dryer

5. Close the Door.

Before you close the door, make sure fabrics are

properly loaded and not caught in the door opening.

Select the Drying Cycle you want.

You can choose a cycle by turning the Cycle Selector

Knob until the required program reaches to its indicator.

If you press Start/Pause button without choosing any

cycle, the dryer will proceed with the Cotton program.

[Please refer to following Cycle Selection Table (page 15)

for the detailed information]

7 . Press the SSttaarrtt//PPaauusseebutton.

You can hear the drum turning.

After operation is completed, open the

door and remove the laundry.

Be careful! Drum inside could be still hot.

(Operation time varies depending on your cycle

selection or options.)

9. Clean the lint filters and

empty water container.

The lint filter should be cleaned after each load.

10. Turn off the Dryer.

Press the Power button.

Select the

desired

cycle.

Take out

the laundry.

Clean the

door lint

filter.

CAUTION

• Be careful the filter is not torn or damaged

when using a vacuum cleaner. If there is a

little residue buildup on filter, you can scrub

lint screen with a brush to remove.

• If you want to open the door while dryer is

operating, please press the Start/Pause

button first, wait until drum completely

stops and then open the door.

Additional Functions

dditional Functions

Note

You can only save one Custom PGM

program at a time. If you press and hold the

Custom PGM button for 3 seconds, you will

overwrite any previously stored Custom

PGM settings.

Once Custom PGM has been recalled, any of

the memorized modifiers or options can be

adjusted. However, if the Cycle Selector

Knob is rotated, Custom PGM will be

cancelled.

Note

If the door is opened during the drying portion

of a cycle before Wrinkle Care has started, the

cycle will not be cancelled and Wrinkle Care

will begin as soon as the normal drying portion

of the cycle is completed.

Time Delay

The Time Delay feature allows you to have the

dryer run at a time that is more convenient, for

example when electricity rates are cheaper.

The cycle can be delayed from 3 hours up to a

maximum of 19 hours.

1. Load the dryer and close the door.

2. Press the Power button.

3. Select the desired cycle and options.

4. Press the Time Delay button until the

desired delay time is displayed.

5. Press the Start/Pause button.

Wrinkle Care ( )

Selecting this option will tumble the load

periodically for a few seconds without heat.

This will continue for up to 2 hours after the

selected cycle, or until the door is opened.

This prevents wrinkling of unremoved dry

items until they can be removed.

Custom PGM

If you have a special combination of settings

that you use frequently, you can save these

settings as a Custom PGM.

*To Save a Custom PGM

1. Turn on the dryer.

2. Select a cycle.

3. Use the cycle modifier buttons to adjust the

settings for that cycle.

4. Set any other desired cycle options.

5. Press and hold the Custom PGM button for 3

seconds. You will hear two beeps to confirm

the settings have been stored.

To Recall a Custom PGM

1. Press and release the Custom PGM button.

The stored settings will be displayed.

2. Press and release the Cycle Selector Knob to

start the cycle. The dryer will start

automatically.

Additional Functions

dditional Functions

More Time / Less Time

The More Time and Less Time buttons can

be used to increase or decrease the dry time

when MANUAL DRY cycles are selected.

These buttons are disabled once the cycle is

started.

Options

Gentle

- This function keeps the garments more moist

than the standard Iron dry level.

- Cotton, Mixed Fabircs and Easy Care cycles.

Damp Dry Signal

- This option causes the control to beep once

the clothes have reached a "Damp Dry Signal"

level. This can be used to alert you to remove

articles that you don't want to over dry or that

you want to have damp for easier ironing.

- Cotton, Mixed Fabircs and Easy Care cycles.

Note

These buttons are available only with

MANUAL DRY, before you push

Start/Pause button.

Drum Light

Press the Drum Light button to turn on the

drum light during dryer operation. This will

allow you to more easily observe the load.

The drum light will come on any time the

door is opened.

Signal

Press the Signal button to adjust the volume of

the signals from high to off.

Child Lock( )

Use this option to prevent cycle settings from

being changed while the dryer is operating.

Press and hold the Dry Level button for 3

seconds to activate or deactivate the Child Lock

function.

The lock icon will be shown in the display, and

all controls are disabled.

Temp.

Adjusts the temperature setting from Ultra Low

to High. This allows precise care of your fabrics

and garments.

• Press the Temp. button repeatedly to scroll

through available settings.

Additional Functions

dditional Functions

• The Tag On function allows you to conveniently use the LG SmartDiagnosis™ and Cycle Download features to

communicate with your appliance right from your own smart phone.

•To use the Tag On function:

1. Download the LG Smart Laundry & DW App to your smart phone.

2. Turn on the NFC (Near Field Communication) function in your smart phone.

• The Tag On function can only be used with most smart phones equipped with the NFC function and based on

the Android operating system (OS).

1. Enter the "Settings" menu of the smart phone and

select "Share & Connect" under "WIRELESS &

NETWORKS".

2. Set "NFC" and "Direct Android Beam" to ON and

select "NFC".

3. Check "Use Read and Write/P2P receive".

Turning on the NFC function of the smart phone

Note

• Depending on the smart phone

manufacturer and Android OS version, the

NFC activation process may differ.

• Refer to the manual of your smart phone for

details.

Additional Functions

dditional Functions

•

Because of the characteristics of NFC, if the transmission distance is too far, or if there is a metal sticker or a

thick case on the phone, transmission will not be good. In some cases, NFC-equipped phones may be unable to

transmit successfully.

•

Press in the LG Smart Laundry & DW app for a more detailed guide on how to use the Tag On function.

• Tag On:

Look for the Tag On icon next to the LED screen on

the control panel.

This is where you position your smart phone when

using the Tag On function with the LG

SmartDiagnosis™ and Cycle Download features of

the LG Smart Laundry & DW App.

• When you use the Tag On function, position your

smart phone so that the NFC antenna on the back

of your smart phone matches the position of the

Tag On icon on the appliance.

If you do not know the position of your NFC

antenna, move your smart phone very slightly in a

circular motion until the application verifies the

connection.

The Tag On guide

Tag On position

Caring For Your Dryer

aring For Your Dryer

Note

If the dryer is stopped in the middle of a

cycle, the lint filter may be very hot.

Failure to follow these cool down

instructions could result in injury.

Clean lint filter

To maintain proper air flow and keep your dryer

operating at peak efficiency, it is important to empty

the lint filter between every load. If the Clean

Filter( ) light comes on during a cycle and the

beeper sounds, pause the dryer and empty the filter

immediately.

Clean lint filter during a cycle

If the Clean Filter( ) light flashes and the alarm

sounds during operation, clean the filter promptly.

1. Press the Power button to stop the dryer. Then press

it again to turn the dryer on.

2. Turn the Cycle Selector Knob to select the Cool Air

cycle.

3. Press the Start/Pause button the start the dryer.

4. Let the Cool Air cycle run for 5 minutes to cool the

dryer, then open the door and clean the lint filter.

Empty water container

If your dryer is not connected to a household drain,

then the water reservoir will capture the water from

the drying process. This should be emptied every

load. Failure to do so may result in poor drying

performance.

If the container becomes full during a cycle, the

Empty Water( ) light and alarm will be activated.

In this case, the water reservoir should be emptied

immediately, but in no case should it continue to be

used for more than 1 hour.

5. Close the door.

1. Open the door.

2. Pull the filter out.

3. Open the filter and

use your fingers to roll

the lint off the screen

surfaces. If the lint is

difficult to remove or

the filter material is

showing signs of

clogging, follow the

cleaning instructions

below.

4. Snap the filter closed

and replace it in the

dryer.

- Push the filter all the

way down to avoid

Interference with the

door

1. Using the

handle on the

front of the

drawer, pull out

the reservoir.

2. Using the

handle on the

front of the

drawer, pull out

the reservoir.

3. Drain the water into a sink.

4. Press the Start/Pause button to resume the

cycle.

Wash the lint screen in warm, soapy, water.

Dry thoroughly and replace.

Caring For Your Dryer

aring For Your Dryer

Condenser

The condenser is a very important part of your dryer. This is where the moisture is removed form the air so there

is no need for an outside exhaust. If the condenser is not properly maintained, it will greatly increase energy

consumption and drying time. The condenser should be cleaned 3 or 4 times a year, or any time the

Clean Condenser( ) light blinks.

1. Push the tab and open the condenser

cover.

2. Unlock the inner plate by rotating the locking

levers on either side of the plate. Then slide

the plate out of the opening.

3. Carefully slide the condenser straight out of

the housing using the finger ring at the center.

Use care when handling the condenser to

prevent damage that could reduce its

efficiency.

4. Thoroughly clean the condenser by

running tap water through it from both the

ends and the sides.

5. Slide the clean condenser into the housing.

Make sure it is oriented as shown in the

drawing in step 3.

6. Insert the inner plate into the opening in front

of the condenser, then rotate the locking tabs

to lock it in place. Then close the front cover.

Front

Side

Sealing cover

Top

Bottom

CAUTION

•NEVER operate the dryer without the

condenser in place.

•Do not operate the dryer with a dirty or

clogged condenser. Doing so will increase

energy consumption and drying times.

•Handle the condenser with care. Do not use

sharp or hard objects to clean the condenser

as this could damage the condenser.

• Do not operate the dryer with a damaged

condenser. Doing so could result in leaking

which may result in property damage.

Condenser cover

Caring For Your Dryer

aring For Your Dryer

Ventilation Grille and Cool Air Inlet

Grille

Use a vacuum cleaner to clean the front

ventilation grill and the cool air inlet in the back.

Failure to remove any lint or dirt buildup will

reduce air flow and increase energy

consumption and drying times.

Moisture Sensor

This sensor is used by the control to sense the

moisture remaining in the clothes. If the sensor

becomes dirty or coated the control will not be

able to sense the moisture and the dryer will shut

off before the clothes are dry.

Clean the sensor bars as shown below to

maintain optimum performance of the SENSOR

DRY cycles.

Slide the drain

connection out

the opening

located on the

back of the

dryer on the

right side as you

face the rear of

the dryer.

2. Disconnect the

hose that goes

up to the

reservoir.

Condensed Water Drain

Condensed water is pumped to the reservoir which

must be emptied every load. If a household drain is

available, this water can be pumped down the drain

so the reservoir is not used.

Note

The warm air is exhausted through the

ventilation grill.

Connect the

external drain

hose included

with the dryer.

Route this hose

to a permanent

drain and

secure the hose

so it can not

come loose.

Additional Tips For Smart Use

dditional Tips For Smart Use

Woolen Article

Dry woolens in wool cycle. Be sure to follow fabric

care label symbols. Wool is not completely dried

from the program so don't repeat drying. Pull

woolens to their original shape and dry them flat.

Woven and loopknit materials

Some woven and loopknit materials may shrink,

depending on quality.

Permanent Press and Synthetics

Do not overload your dryer.

Take out permanent press items as soon as the

dryer stops to reduce wrinkles.

Baby clothes and night gowns

Always check the manufacturer’s instructions.

Rubber and Plastics

Do not dry any items made from or containing rubber

or plastics such as:

a) Aprons, bibs and chair covers

b) Curtains and table clothes

c) Bathmats

Fiber glass

Do not dry fiberglass articles in your dryer.

Glass particles left in the dryer could be picked up by

your clothes the next time you use the dryer and

irriate your skin.

Fabric Care Labels

Sort and dry laundry according to care labels, size,

and fabric type.

Do not overload the dryer. This will save energy and

time and give the best drying performance.

Below are fabric care labels.

Symbols Instructions

Dry

Tumble dry

Permanent Press /

Wrinkle resistant

Gentle / Delicates

Do not tumble dry

Do not dry

High heating

Medium heating

Low heating

No heat / air

Line Dry / hang to dry

Drip dry

Dry flat

In the shade

Drying Guide

Additional Tips For Smart Use

dditional Tips For Smart Use

Spare Parts

Spare parts are covered under the terms of

warranty. Components covered by warranty are

provided free of charge. If coverage is expired,

spare parts must be purchased from an

authorized service center.

Disposal of the dryer

To prevent possible injury to children, if you

dispose of this dryer you must do so safely.

Remove and dispose of the door, lid, and other

protruding parts which could cause harm. Cut off

the power cord to prevent future use. Follow

local ordinances to dispose of the dryer safely.

Service contact

If there is something wrong with your dryer, refer

to the troubleshooting table.

If the trouble persists or you still have questions,

please contact an authorized service center or

call 1-800-243-0000.

You will need to provide the service center with

the following information:

1. Your name, address, and ZIP code.

2. Your phone number.

3. Description of the problem.

4. The model number and serial number

of your dryer.

5. The date of purchase.

Dryer Rack

Accessory parts

Your dryer comes with accessories such as

1. Condensing drain hose

2. Hose holder

3. Stacking kit (2EA)

Dryer Rack (Purchased Separately)

Troubleshooting Guide

roubleshooting Guide

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

1. Problem: My dryer won’t start

Question What to Do

Is the dryer plugged in

Is the fuse blown, or is the circuit

breaker tripped

Confirm that the dryer’s plug is securely and completely pushed into the

power outlet

Check your home’s or laundry room’s fuse box

ircuit breaker box and replace the

fuse or reset the circuit breaker.

2. Problem: My dryer doesn’t heat

Question What to Do

Is the fuse blown, or is the circuit

breaker tripped

If the fuse is blown or the circuit breaker tripped, the dryer might tumble but not heat.

Check your home’s or laundry room’s fuse box/circuit breaker box and replace the

fuse or reset the circuit breaker.

3. Problem: There are greasy spots on my clothes

Question What to Do

Did you follow the instructions on your

fabric softener product

Are you drying clean and dirty clothes

together

Were your clothes entirely clean

Check and follow the instructions provided with your fabric softener product.

Make sure to use your dryer to dry only clean items, because dirty items can soil clean

clothes placed in the same load or later placed in the dryer drum.

Stains on dried clothes are actually stains that weren’t removed during the washing

process. Make sure you are following your washing instructions and that the clothes

are being completely cleaned.

Troubleshooting Guide

roubleshooting Guide

4. Problem: There is lint on my clothes

Question What to Do

Is your lint filter full

Did you properly sort your load of

laundry

Do your clothes have excess static

electricity

Did you overload your dryer

Did you place any paper, tissue, or

other similar material in the load

Please refer to the manual section on cleaning the lint filter, and please confirm that

the lint filter is clean. It is important that the lint filter is clean before each new load of

laundry.

In order to reduce the amount of lint in a load of laundry, sort lint producers (like a

fuzzy white cotton towel) separately from clothes that might catch lint (such as a pair

of black linen pants).

See comments below under item 5, There is static in my clothes after drying.

Divide your larger load into smaller loads.

Sometimes a person might forget to take a piece of paper or a tissue out of the pocket

of a pair of pants, and this paper, tissue, or similar material can cause excess lint in a

load of laundry. Confirm that the pockets of pants, shirts, and other articles of clothing

are empty before washing and drying.

5. Problem: There is static in my clothes after drying

Question What to Do

Did you use fabric softener

Did you over dry the load of laundry

Are you drying synthetic,

permanent press and blends

Try using a fabric softener to reduce static electricity.

Overdrying a load of laundry can cause a build up of static electricity. Try

using a fabric softener or adjust your settings and use a shorter drying time.

These materials can cause static to build up in a load of dried clothes. Try

using a fabric softener.

6. Problem: The drying time is not consistent

Question What to Do

Are you using consistent heat settings

and consistent load sizes

The drying time for a load will vary depending on several factors including, but not

limited to, the size of the load, the type of fabrics , the wetness of the clothes, the

condition of the lint filter and the rating of the power source (i.e. 208V will take

longer than 240V).

Troubleshooting Guide

roubleshooting Guide

7. Problem: It takes too long for my clothes to dry

Question What to Do

8. Problem: My clothes are wrinkled

Question What to Do

Are you overdrying your laundry

Are you removing your laundry from

the dryer soon after the drying cycle is

complete

Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying

time, and remove items while they still retain a slight amount of moisture.

Remove your laundry from the dryer after the drying cycle ends and either hang or

fold the items.

9. Problem: My clothes are shrinking

Question What to Do

Are you following the care instructions

for your garment

To avoid shrinkage, carefully follow the care and use instructions for your garment,

because some fabrics will naturally shrink when washed. Other fabrics can be washed

but will shrink when dried in a dryer.

Separate heavy weight items from light weight items when creating loads.

Heavy fabrics take longer to dry because they tend to retain more moisture.

To help reduce and maintain more consistent drying times for large and heavy fabrics,

separate these items into smaller loads of a consistent size.

Use the appropriate control settings for the type of load you are drying.

Please confirm that the lint filter is clean prior to each new load of laundry.

Check your home’s or laundry room’s fuse box/circuit breaker box and replace the fuse

or reset the circuit breaker.

Divide your larger load into a number of smaller loads.

If you are only drying a handful of items, add a few extra pieces to help ensure

proper tumbling action.

Did you properly sort your loads of

laundry

Are you drying large loads of heavy

fabrics

Are the dryer controls properly set

Is the lint filter clean before each new

load of laundry

Is the fuse blown, or is the circuit

breaker tripped

Did you overload your dryer

Did you under load your dryer

Troubleshooting Guide

roubleshooting Guide

Error Mode

• LED displays if the door is open. Make sure the door is closed and press the

Start/Pause button to operate the dryer.

• If display errors continue to occur, unplug the power cord and then call

the Service Center.

Drum light does not work

• Contact customer service

Troubleshooting Guide

roubleshooting Guide

Should you experience any problems with your dryer, it has the capability of transmitting data

to your smart phone using the LG Smart Laundry Application or via your telephone to the LG

call center.

Smart Diagnosis™ cannot be activated unless your dryer is turned on by pressing the Power

button. If your dryer is unable to turn on, then troubleshooting must be done without using

Smart Diagnosis™

Note

• For best results, do not move the phone

while the tones are being transmitted.

• If the call center agent is not able to get

an accurate recording of the data, you

may be asked to try again.

Using Smart Diagnosis™

Smart Diagnosis™ Using Your Smart

Phone

1. Download the LG Smart Laundry & DW

application on your smart phone.

2. Open the LG Smart Laundry application

on your smart phone. Press the right

arrow button to advance to the next

screen.

3. Press the Record button on the smart

phone and then hold the mouth piece of

the smart phone near the Smart

Diagnosis™ logo on the dryer.

4. With the phone held in place, press and

hold the More Time button for 3 seconds.

5. Keep the phone in place until the tone

transmission has finished. The display

will count down the time.

6. When the recording is complete, view the

diagnosis by pressing the Next button on

the phone.

Smart Diagnosis™ Through the Call

Center

1. Call the LG call center at: (LG U.S.)

1-800-243-0000

(LG Canada) 1-888-542-2623.

2. When instructed to do so by the call

center agent, hold the mouthpiece of your

phone over the Smart Diagnosis™ logo

on the machine. Hold the phone no more

than one inch from (but not touching) the

machine.

3. Press and hold the More Time button for

3 seconds.

4. Keep the phone in place until the tone

transmission has finished. The display

will count down the time.

5. Once the countdown is over and the

tones have stopped, resume your

conversation with the call center agent,

who will then be able to assist you in

using the information transmitted for

analysis.

Note

Do not touch any other buttons or icons

on the display screen.

Note

• Call quality differences by region may

affect the function.

• Use a home telephone for better

communication performance, resulting in

better service.

• Poor call quality may result in poor data

transmission from your phone to the

machine, which could cause Smart

Diagnosis™ to malfunction.

Technical Date

echnical Data

33 1/2"

(850 mm)

25 1/4"

(640 mm)

23 5/8"

(600 mm)

Type : Electric Dryer

Rating : Please refer to the rating label regarding detailed information.

Size : 23 5/8x 25 1/4x 33 1/2(inch)

Capacity : IEC 4.2 cu.ft

Weight : 107lb (48.6 kg)

❋The appearance and specifications are subject to change without manufacturer’s notice.

Ventilation Requirement

Alcove or

undercounter

Closet

Ensure air flow of

112 cu.ft./min

through dryer

Closet door must have

2(louvered) openings,

each having a minimum

area of 60 sq. inches

(387 sq.cm), located 3

inches (8 cm) from

bottom and top of door.

Warranty

arranty

WARRANTY (USA)

Should your LG Dryer (“Product”) fail due to a defect in materials or workmanship under normal home

use, during the warranty period set forth below, LG will at its option repair or replace the product. This

limited warranty is valid only to the original retail purchaser of the product and applies only when

purchased and used within the United States including U.S. Territories. Proof of original retail purchase

is required to obtain warranty service under this limited warranty.

• Replacement products and parts are warranted for the remaining portion of the original warranty

period or ninety (90) days, whichever is greater.

• Replacement products and parts may be new or remanufactured.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT

IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE

MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING

WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER

BASED IN CONTRACT, TORT, OR OTHERWISE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or

limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to

you. This warranty gives you specific legal rights and you may also have other rights that vary from

state to state.

THIS LIMITED WARRANTY DOES NOT COVER:

• Service trips to deliver, pick up, or install or repair the product; instruction to the customer on

operation of the product; repair or replacement of fuses or correction of wiring or plumbing, or

correction of unauthorized repairs/installation.

• Failure of the product to perform during power failures and interruptions or inadequate electrical

service.

• Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate

or interrupted water supply or inadequate supply of air.

• Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions

outlined in the Product’s owner’s manual.

• Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of

God.

• Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the

intended purpose, or any water leakage where the unit was not properly installed.

• Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or

industrial use, or use of accessories, components, or consumable cleaning products that are not

approved by LG.

Warranty

arranty

• Damage caused by transportation and handling, including scratches, dents, chips, and/or other

damage to the finish of your product, unless such damage results from defects in materials or

workmanship and is reported within one (1) week of delivery.

• Damage or missing items to any display, open box, discounted, or refurbished Product.

• Products with original serial numbers that have been removed, altered, or cannot be readily

determined. Model and Serial numbers, along with original retail sales receipt, are required for

warranty validation.

• Increases in utility costs and additional utility expenses.

• Repairs when your Product is used in other than normal and usual household use (e.g. commercial

use, in offices and recreational facilities) or contrary to the instructions outlined in the Product’s

owner’s manual.

• Costs associated with removal of your Product from your home for repairs.

• The removal and reinstallation of the Product if it is installed in an inaccessible location or is not

installed in accordance with published installation instructions, including LG’s owner’s and installation

manuals.

• Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair

includes use of parts not approved or specified by LG.

• The warranty also does not cover the following:

The cost of repair or replacement under these excluded circumstances shall be borne by the

consumer.

TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION

For additional product information, visit the LG website at http://www.lg.com

For assistance using this product or to schedule service, contact LG Electronics at 1-800-243-0000.

For further assistance, write: LG Electronics, 201 James Record Road, Huntsville, Alabama 35813

LG DLEC888W MFL67653090_en_160713 User Manual DRYER Manuals And Guides 1610057L

Navigation menu

Versions of this User Manual:

Views

Navigation