LG GP08NU6B GP08 QSG 1009U User Manual Owner's GP08NU6BRW

Lg-Gp08Nu6R-Owner-S-Manual lg-gp08nu6r-owner-s-manual

Lg-Gp08Nu6W-Owner-S-Manual lg-gp08nu6w-owner-s-manual

Lg-Gp08Nu6B-Owner-S-Manual lg-gp08nu6b-owner-s-manual

User Manual: LG GP08NU6B Owner's Manual Most comprehensive of product setup and usage. (English)

Open the PDF directly: View PDF .
Page Count: 4

• Please pay attention to handling Electrostatic

Sensitive Devices, you may use anti-static

products such as wrist straps, heel straps, mats

to protect your body from electrostatic.

• Make sure you have a personal computer with

one or two open USB ports before connecting

the drive to your computer.

• Power for all other devices should be turn off

before attaching the cables.

Connect the drive to the computer as shown in

figure.

1Connect the USB 2.0 (Y type) cable to

the drive.

2Connect the other end of the USB 2.0

cable to your computer.

3The drive may get its power from the PC

USB power. All systems may not meet

USB power requirements and full

performance may not be achieved.

In this case, connect to the USB power

cable.

When the computer is ready, confirm that the

drive is detected. And then, insert the supplied

software CD into the drive and install the

software.

• Please do not connect the USB cables by any means other than specified above.

Using the wrong type of cable with this drive can cause it to malfunction.

• The machine does not have an ON/OFF switch.

As soon as it is connected to the AC power, the power up sequence begins.

The power supply cord is intended to serve as the main disconnect device.

The power outlet shall be near the equipment and shall be easily accessible.

• The appliance is not intended for use by young children or infirm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance.

• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord

extension set on electrical portable outlet device must be positioned so that it is not subject to splashing

or ingress of moisture.

Installation

NOTES

Connecting to computer

Hardware Installation

NOTES

USB Power cable

1

2

3

1. Disc Tray

2. Drive activity indicator

The LED is used to indicate the operation of

drive.

3. Eject Button

4. Emergency Eject Hole

1. USB Connector (mini)

This connector is used to connect to the USB

2.0 cable.

Location and function of controls

Removing the USB converter cable (For Windows)

The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by

performing the following operation.

1. Stop the application software being currently used.

2. Click the icon “ ” of the taskbar located on your screen’s bottom right side.

3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.

4. Click “Ok” and then remove the USB converter cable.

1 2 3 4

This following is the general figure of the design of the drive.

The drive’s appearance and specifications may change without prior notice.

Front

Rear

1

NOTE

Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup.

The removing procedure varies depending on your OS.

Features

• Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.

• Buffer Under Run error protection technology

• Emergency eject support

• Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R

DL and DVD-RAM drive functions into one drive.

• Supports region playback control Phase II.

• PC USB powered, no AC adapter needed.

System meeting the following requirements is needed in order to use USB

2.0 operation with this drive.

•Computer that is equipped with a USB 2.0 – compliant USB connector or PCI

adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller

Interface) driver software 1) has been installed.

1) The USB 2.0 EHCI driver software is supplied with currently available PCI

adapter cards that conform to USB 2.0. Further, Microsoft has released the USB

2.0 EHCI driver software for Windows XP, therefore it is also possible to use this

driver software with Windows XP SP2.

If you want to know in detail, please contact your USB 2.0 adapter dealer or

consult your PC manufacturer, or consult the Microsoft Corporation Web site.

System Environment

Computer

This unit can be operated in the system environment explained here.

* For Windows 7/ Windows Vista, 1 GB of RAM or large is recommended.

* Compatibility problem in write/read function may occur with some media depending on the media

manufacturing quality.

* To achieve maximum Record & Write speed your system may require data to be copied first to the

computer’s hard drive rather than directly from another source disc or drive.

Specifications

Pentium IV 2.4 GHz or Higher(with USB 2.0) for basic

performance (Recommended for optimal performance:

Pentium IV 3.2 GHz or Higher).

256 MB or larger (Recommended: 512 MB).

20 GB or more free space. (The free space needed for writing

depends on the quantity of data.)

64 MB (Recommended: 128 MB).

USB 2.0 port

For Software installation

Windows 7/Windows Vista/Windows XP SP2, Direct X 9.0 or

Higher

CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That’s, TDK,

Ritek or HP discs are recommended.

CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are

recommended.

DVD-R : Mitsubishi Kagaku Media, Maxell, That’s are

recommended.

DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are

recommended.

DVD+R : Mitsubishi Kagaku Media, That’s, Maxell are

recommended.

DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are

recommended.

DVD-RAM :

Maxell, Mitsubishi Kagaku Media are recommended.

DVD±R DL : Mitsubishi Kagaku Media, Verbatim are

recommended.

System

requirements

Hard disk

Video Memory

Interface

CD-ROM drive

Software Required OS

CD-R, CD-RW,

DVD-R, DVD-RW,

DVD+R, DVD+RW,

DVD-RAM,

DVD±R DL discs

CPU

Memory

❋

The drive’s appearance and specifications may change without prior notice

.

- The maximum data transfer rate varies according to the performance

capabilities of the PC.

- For the sake of periodic improvements, specifications and appearance are

subject to change without notice.

- We have taken all possible measures to assure the quality of our products,

but we cannot be responsible for the consequences if defect occurs.

Software

Install the appropriate CD Recording Authoring Software before using this unit.

* Please uninstall any previous CD burning software you may have loaded on

your PC in order to prevent possible compatibility issues.

Once you have installed the application software, you may (if you wish) begin to

reinstall previous software, taking note for errors. We recommend using the drive

with the latest software as some problems encountered when using the drive can

be solved by updating the software.

Please visit www.lgservice.com and install the program,

“LG ODD Online F/W update.” By using the program,

you can automatically check the latest information about FirmWares and

update the FirmWare.

Worldwide support ; http://www.LGservice.com

Worldwide corporate site : http://www.LGE.com

Supported Discs

DVD-ROM(Single/Dual), DVD-RW, DVD-R,

DVD+RW, DVD+R, DVD+R Double layer, DVD-R

Dual layer, DVD- RAM, CD-Digital Audio &

CD-Extra, CD-Plus, CD-ROM, CD-ROM XA-Ready,

CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW,

Photo-CD (Single & Multi-Session), Video CD,

DVD-VIDEO

Dimensions (WxHxD) 153 x 24 x 163 mm

Weight About 350 g

Interface USB 2.0

Read/Write Speed

Write : (DVD-R): 2x, 4x, 8x

(DVD-R DL): 2x, 4x, 6x

(DVD-RW): 2x, 4x, 6x

(DVD-RAM): 2x, 3x, 5x (Ver. 2.0 & higher)

(DVD+R): 2.4x, 4x, 8x

(DVD+R DL): 2.4x, 4x, 6x

(DVD+RW): 2.4x, 3.3x, 4x, 8x

(CD-R): 10x, 16x, 24x

(CD-RW): 4x, 10x, 16x, 24x

Read : (DVD-R/RW/ROM): 8x/8x/8x max.

(DVD-R DL): 8x max.

(DVD-RAM) (Ver.2.0 & Higher): 5x max.

(DVD-Video) (CSS Compliant Disc): 4x max.

(DVD+R/+RW): 8x/8x max.

(DVD+R DL): 8x max.

(CD-R/RW/ROM): 24x/24x/24x max.

(CD-DA (DAE)): 24x max.

Data transfer rate

Sustained CD-ROM : 3,600 kB/s (24x max)

DVD-ROM : 11.08 MB/s (8x max)

Average Access CD-ROM : 210 ms (Typical)

Time (

1/3Stroke

)

DVD-ROM : 220 ms (Typical)

DVD-RAM : 260 ms (Typical)

Buffer capacity 1 MB

MTBF 60,000 Power On Hours (Duty Cycle 10 %)

Power Requirement 5 V DC

Operating Environment

Temperature 5 °C to 40 °C

Humidity 15 % to 85 %

Storage Environment

Temperature -30 °C to 60 °C

Humidity 10 % to 90 % RH

Item Quantity

- Portable Super Multi Drive 1

- USB 2.0 cable (Y type) 1

- Software Installation disc 1

- Quick Guide for Drive 1

Quick Set-up Guide

Portable

Super Multi Drive

GP08

To install of your product, please read this guide manual carefully and completely.

P/NO. 3828HN1009U Ver. A

Package Items

Cautions

Safety Instructions

Ce produit a été fabriqué conformément aux prescriptions EMC DIRECTIVE

2004/108/EC et

2006/95/EC.

Questo prodotto risponde alle direttive EMC 2004/108/EC e 2006/95/EC,

relative alla compatibilità elettromagnetica.

Este producto ha sido fabricado cumpliendo los requisitos sobre interferencias

de radio de la DIRECTIVAS EMC 2004/108/EC y 2006/95/EC.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

CLASE 1 PRODUCTO LÁSER

CLASSE 1 PRODOTTO LASER

CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCKS DEFEATED.AVOID EXPOSURE TO THE BEAM.

ADVARSEL :

KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING I ÅBEN TILSTAND

OG VED AFBRUDT LÅSEFUNKTION. UNDGÅ AT BLIVE RAMT AF LASERSTRÅLEN.

VARO! : LUOKKA 3B AVATTAESSA JA KUMOTTAESSA LUKITUS NÄKYVÄÄ JA

NÄKYMÄTÖNTÄ LASERSÄTEILYÄ. VÄLTÄ LASERSÄTEILLE ALTISTUMISTA.

ATTENTION : CLASSE 3B RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS

D’OUVERTURE ET ENCLENCHEMENTS DEFECTUEUX, EVITER L'EXPOSITION

AU FAISCEAU.

VORSICHT : SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG DER KLASSE

3B WENN ABDECKUNG GEÖFFNET UND SICHERHEITSVERRIEGELUNG

ÜBERBRÜCKT VERMEIDEN SIE ES, SICH DEM STRAHL AUSZUSETZEN.

ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING NÅR ÅPNES

OG LÅS BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.

VARNING : KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING FÖREKOMMER

NÄR OCH MELLANLÅSET FÖRSTÖRS. UNDVIK EXPONERING UNDER STRÅLEN.

Dieses Produkt erfüllt die Funkstörungsanforderungen folgender Normen:

2004/108/EC und

2006/95/EC.

This product is manufactured to comply with the radio interference requirements

of EMC Directive 2004/108/EC and Low Voltage Directive

2006/95/EC.

■Microsoft®and Windows®are trademarks registered in the United

States and other countries by the Microsoft Corporation.

■The company names and product names written in this manual are

trademarks or registered trademarks of the respective companies.

Industry Canada requirement

This class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

FCC COMPLIANCE STATEMENT

Note : This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an Authorized Service Center for help.

• FCC WARNING

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

• This Portable Super Multi Drive is for use only with UL listed personal

computers that have installation instructions detailing

user-installation of card cage accessory.

CAUTION: The laser used in the Portable Super Multi Drive can

damage your eyes. Do not attempt to open the cover. To reduce the

risk of electric shock, do not remove the cover (or back).

There are no user-serviceable parts inside. Refer servicing to qualified

service personnel. Use of controls or performance of procedures other

than those specified herein may result in hazardous radiation exposure.

WARNING: To reduce the risk of fire or electric shock, do not expose

this appliance to rain or moisture.a

VORSICHT : Der in diesem Portable Super Multi -Laufwerk benutzte

Laser kann Ihre Augen schädigen. Versuchen Sie keinesfalls, die

Abdeckung zu öffnen. Um die Gefahr eines elektrischen Schocks zu

reduzieren, sollten Sie die Abdeckung (oder Rückseite) keinesfalls

entfernen. Im Inneren des Geräts befinden sich keine Teile, die vom

Benutzer selbst gewartet werden können. Überlassen Sie die Wartung

qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung

von Bedienelementen und der Durchführung von Prozeduren

unbedingt die Anweisungen dieses Handbuchs, da andernfalls

gefährliche Strahlung freigesetzt werden kann.

WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder

Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen

Schocks zu reduzieren.

ATTENTION: l'exposition au laser utilisé dans le super graveur multi-

présente un danger pour les yeux. N'essayez pas d'ouvrir le capot.

Afin de réduire les risques de chocs électriques, ne retirez pas le capot

(ni l'arrière du dispositif). Aucune pièce interne ne peut être remplacée par

l'utilisateur. Pour la maintenance de l'appareil, adressez-vous au personnel

qualifié du service de maintenance. L'utilisation de commandes ou de

procédures différentes de celles spécifiées ci-après peut entraîner une

exposition à des rayons dangereux.

AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à

l’humidité (risques d’incendie et d’électrocution).

PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo

masterizzatore utilizza un raggio laser che, se osservato da vicino, può

danneggiare la vista. Evitare di smontare il coperchio dell’apparecchio.

Al fine di prevenire eventuali folgorazioni, evitare di smontare

l’apparecchio. All’interno dell’apparecchio non sono presenti parti che

richiedono manutenzione da parte dell’utente. In caso di difetti o

guasti, rivolgersi ad un Centro di Assistenza Tecnica. L’esecuzione di

procedure diverse da quella espressamente indicate in questo

manuale può provocare pericolose esposizioni alle radiazioni laser.

ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio,

evitare di esporre questo apparecchio alla pioggia o ad una eccessiva

umidità ambientale.

PRECAUCION: El láser utilizado en la unidad Portable Super Multi

puede dañar sus ojos. No intente abrir la tapa. Para reducir el riesgo

de descarga eléctrica, no quite la tapa (ni la parte posterior).

No hay piezas internas que deba mantener el usuario.

El servicio de mantenimiento debe efectuarlo personal técnico cualificado.

El uso de controles o la ejecución de procedimientos distintos de los

especificados en este manual pueden ser causa de exposición a

radiación peligrosa.

ADVERTENCIA: Para reducir el riesgo de fuego o descarga eléctrica,

no exponga este aparato a la lluvia ni a la humedad.

CUIDADO: O laser utilizado na unidade Super Multi pode causar lesões

oculares. Não tente abrir a tampa. Para reduzir o risco de choques

eléctricos, não retire a tampa (quer frontal quer superior ).

A unidade não contém peças que possam ser reparadas pelo utilizador.

Deixe a manutenção para um técnico da assistência qualificado.

A utilização de controlos ou a execução de procedimentos que não

sejam os especificados neste manual podem causar a exposição a

radiações perigosas.

AVISO: Para reduzir o risco de incêndio ou choque elétrico não

exponha este aparelho á chuva ou humidade.