LG LSC27921SB User Manual Owner's MFL62306005 En
LSC27921SB Owner's Manual File?fileId=KROWM000250629 Most comprehensive of product setup and usage. (English)
2011-02-14
User Manual: LG LSC27921SB Owner's Manual Most comprehensive of product setup and usage. (English)
Open the PDF directly: View PDF .
Page Count: 27
Download | |
Open PDF In Browser | View PDF |
ENGLISH ESPAÑOL OWNER’S MANUAL SIDE BY SIDE REFRIGERATOR Please read this manual carefully before operating your set and retain it for future reference. MANUAL DE USUARIO REFRIGERADOR DE DOS PUERTAS Lea detenidamente este manual antes de empezar a utilizar el refrigerador y guárdelo como referencia para el futuro. Model Name/Nombre de Modelo **color number/número de color LSC27921** P/No. MFL62306005 www.lg.com WARRANTY Visit our web site http://www.lg.com LG Electronics LIMITED WARRANTY United States of America LG Electronics will repair or at its option replace, without charge, your product which proves to be defective in material or workmanship under normal use during the warranty period listed below from the date of original purchase. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S. including Alaska, Hawaii, and U.S. Territories. LG Refrigerator / Freezer Warranty Period Product Parts Labor Refrigerator / Freezer 1 year 1 year [In-Home Service (Except Model GR-051)] Sealed System (Compressor, Condenser, Evaporator) 7 years 1 year [In-Home Service (Except Model GR-051)] No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG ELECTRONICS SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVIENCE OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY APPLICABLE TO THIS PRODUCT. Some States do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. THE ABOVE WARRANTY DOES NOT APPLY TO: 1. Service trips to your home to deliver and pickup, install, instruct, or replace house fuses or correct house wiring or plumbing, or correction of unauthorized repairs. 2. Damage to the product caused by accident, pests, fire, floods, or acts of God. 3. Repairs when your LG product is used in other than normal, single-family household use. 4. Damage resulting from accident, alteration, misuse, abuse, or improper installation. 5. Damages caused during and/or after delivery. 6. Display, discount, or refurbished units purchased with scratches, dents, or defects. Proof of purchase is required and must be provided to LG in order to validate warranty. Therefore, these costs are paid by the consumer. If the product is installed outside the normal service area, any cost of transportation involved in the repair of the product, or the replacement of defective parts, shall be borne by the owner. CUSTOMER ASSISTANCE NUMBERS: To obtain Warranty Coverage: Retain your Bill of Sale to prove date of purchase. A Copy of your Sales Receipt must be submitted at the time warranty service is provided. To obtain Product or Customer: Call 1-800-243-0000 (24 hrs a day, 7 days per week, 365 days per year) Service Assistance: Press the appropriate menu option, and have your product type (Refrigerator), model number, serial number, and ZIP/Postal Code ready. To obtain the nearest Authorized Call 1-800-243-0000 (24 hrs a day, 7 days per week, 365 days per year) Service Center: Press the appropriate option, and have your product type (Refrigerator), model number, serial number, and ZIP/Postal Code ready. 2 TABLE OF CONTENTS Warranty (USA) 2–3 Water and Ice Dispenser 18 Important Safety Instructions 5 Ice Storage Bin 18 Grounding Requirements 6 Icemaker Cover 18 Refrigerator Installation 7 - 12 Door and Rack Support 18 Unpacking your Refrigerator 7 Snack Pan 18 Installation 7 Crisper and Crisper cover 19 Base Grille Installation 7 Refrigerator Shelves 19 Handle Removal 7 Freezer Shelf 19 Removing and Replacing Refrigerator Doors Door Alignment 9 Connecting the water line 10 - 12 Before you begin 10 What you will need 10 Installation Instructions Refrigerator Features Using Your Refrigerator Filter 8-9 Water Filter 20 Performance Data Sheet 21 Care and Cleaning 10 - 12 13 14 - 22 20 - 21 22 - 23 General Cleaning Tips 22 Outside 22 Inside Walls 22 Door liners and Gaskets 22 Ensuring Proper Air Circulation 14 Plastic Parts 22 Prior to Use 14 Back Cover 22 14 - 15 Lamp Replacement 22 Diagnosis Function 15 Power Interruptions 22 - 23 Adjusting Control Settings 16 When you go on Vacation 23 Icemaker Operation 16 When you Move 23 Food Storage Guide 17 When you should set the Icemaker Power Switch to off 23 Storing Frozen Food 17 Normal Sounds you May Hear 23 Control Panel Features Troubleshooting Guide 4 24 - 27 IMPORTANT SAFETY INSTRUCTIONS This guide contains many important safety messages. Always read and obey. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING, or CAUTION. These words mean: DANGER You will be killed or seriously injured if you do not follow instructions. WARNING You can be killed or seriously injured if you do not follow instructions. CAUTION Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate injury, or product damage only. All safety messages will identify the hazard, tell you how to reduce the change of injury and tell you what can happen if the instructions are not followed. WARNING To reduce the risk of fire, electric shock or injury to persons when using your product, basic safety precautions should be followed, including the following. Read all instructions before using this appliance: • For personal safety, this appliance must be properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded. • This refrigerator must be properly installed in accordance with the ‘Attention Installer’ instructions that were taped to the front of the refrigerator. • NEVER unplug your refrigerator by pulling on the • After your refrigerator is in operation, do not touch the power cord. Always grip the plug firmly and pull it cold surfaces in the freezer compartment when hands straight out from the outlet. are damp or wet. Skin may adhere to the extremely • Repair or replace immediately all electric service cords cold surfaces. that have become frayed or otherwise damaged. Do • In refrigerator with automatic icemakers, avoid not use a cord that shows cracks or abrasion contact with the moving parts of the ejector damage along its length or at either the plug or mechanism, or with the heating element that releases connector end. the cubes. • When moving your refrigerator away from the wall, be • DO NOT place fingers or hands on the automatic ice careful not to roll over or damage it in any way. making mechanism while the refrigerator is plugged in. • Do not crush or damage the water line. • Do not store or use gasoline or other flammable vapors • DO NOT refreeze frozen foods which have thawed completely. The United States Department of or liquids in the vicinity of this or any other appliance. Agriculture in Home and Garden Bulletin No. 69 says: • Do not allow children to climb, stand or hang on the “...You may safely refreeze frozen foods that have refrigerator doors or shelves in the refrigerator. They thawed if they still contain ice crystals or if they are still could damage the refrigerator and seriously injure cold below 40 °F (4 °C)”. themselves. “Thawed ground meats, poultry, or fish that have any • Keep fingers out of ‘pinch point’ areas; clearances off-odor or off-color should not be frozen and should between the doors and cabinet are necessarily small. not be eaten. Thawed ice cream should be discarded. Be careful when you open the doors when children are If the odor or color of any food is poor or questionable, in the area. get rid of it. The food may be dangerous to eat”. • Unplug your refrigerator before cleaning or making any “Even partial thawing and refreezing reduces the repairs. eating quality of foods, particularly fruits, vegetables NOTE: We strongly recommend that any servicing be and prepared foods. The eating quality of red meats performed by a qualified individual. is affected less than that of many other foods. Use • Do not store bottles in the freezer compartment, they refrozen foods as soon as possible to save as much of may break when frozen, causing damage. their quality as you can”. • The refrigerator-freezer should be positioned so that the supply plug is accessible for quick disconnection if an accident happens. SAVE THESE INSTRUCTIONS 5 CAUTION This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. DANGER: RISK OF CHILD ENTRAPMENT Before you throw away your old refrigerator or freezer: • Take off the doors. • Leave the shelves in place so that children may not easily climb inside. Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous… even if they will sit for “just a few days”. If you are getting rid of your old refrigerator, please follow the instructions at right to help prevent accidents. CFC DISPOSAL of environmental legislation. This appliance contains fluid (refrigerant, lubricant), and is made of parts and materials which are reusable and / or recyclable. All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). To recycle, please contact your local agency. Your old refrigerator may have a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone. If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper disposal by a qualified servicer. If you intentionally release this CFC refrigerant, you can be subject to fines and imprisonment under provisions GROUNDING REQUIREMENTS WARNING IMPORTANT: Please read carefully. REPLACING ELECTRICAL CABLE If the power cord is damaged, it must be replaced by our service center of qualified LG technician to avoid any risk. TO CONNECT ELECTRICITY WARNING ELECTRICAL SHOCK HAZARD FOR PERSONAL SAFETY, this appliance MUST be properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded. RECOMMENDED GROUNDING METHOD The refrigerator should always be plugged into its own individual properly grounded electrical outlet rated for 115 V ~ 60 Hz only and fused at 15 or 20 amperes. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord. Where a standard two-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded three-prong wall outlet. Do not, under any circumstances, cut or remove the third (Ground) prong from the power cord. USE OF EXTENSION CORDS Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord. However, if you still elect to use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States), 3-wire grounding type appliance extension cord having a grounding type plug and outlet, and that the electrical rating of the cord be 15 amperes (minimum) and 120 V. NOTE: Before performing any type of installation or cleaning turn the control (thermostat, refrigerator control or freezer control, depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (thermostat, refrigerator control or freezer control, depending on the model) to the desired setting. Use of an extension cord will increase the clearance needed for the back of the refrigerator. 6 REFRIGERATOR INSTALLATION NOTE: For proper air circulation, and best cooling and energy consumption results, maintain a minimum distance of 2 inches (5,08cm) from adjacent items and surfaces. WARNING EXCESSIVE WEIGHT HAZARD Use two or more people to move and install the refrigerator. Failure to do so can result in back or other injury. 2"(5,08 cm) WARNING UNPACKING YOUR REFRIGERATOR • Be careful when you work with the hinge, base grille, stopper, etc. You may be injured. • Do not put hands or metal sticks into air vents, base grille or bottom of the refrigerator. You may be injured or receive an electrical shock. Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning type labels, the model and serial number label. To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. BASE GRILLE INSTALLATION To install or replace base grille: 1. Remove the 2 screws from the bottom front part of refrigerator. 2. Place base grille into position and insert and tighten screws. To remove the base grille: 1. Open the doors (Refrigerator and Freezer). 2. Once doors are open, remove screws from base grille and remove. 3. Reattach screws to the base of refrigerator. Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the Important Safety Instructions section. Refrigerator shelves are installed in the shipping position. Please reinstall shelves according to your individual storage needs. WARNING WHEN MOVING YOUR REFRIGERATOR Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur. HANDLE REMOVAL You may have to remove the door handles to move the refrigerator through a narrow opening. See instructions below. WARNING NOTE: To avoid damaging door surfaces when moving the refrigerator through narrow openings, it is ALWAYS recommended to remove the doors as instructed in the next two pages. EXPLOSION HAZARD Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion or fire. • Loosen the set screws with a 3/32” (2,38 mm) Allen wrench and remove the handle. INSTALLATION 1. Avoid placing unit near heat sources, direct sunlight or moisture. 2. To minimize noise and vibration, the refrigerator MUST be installed on a solidly constructed floor. 3. Carpeting and soft tile surfaces are not recommended. 4. NEVER install the refrigerator on a platform or a weakly supported structure. 5. Install this appliance in an area where the temperature is between 41°F (5°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected. NOTE: If the handle mounting fasteners need to be tightened or removed use a 1/4” (6,35 mm) Allen wrench. Mounting fasteners Set screw Allen Wrench 7 REFRIGERATOR INSTALLATION WARNING ELECTRIC SHOCK HAZARD • Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious injury. • Do not put hands, feet or other objects into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock. • Be careful when you work with the hinge, base grille, and stopper. You may be injured. Before removing the doors, remove the base grille. Figure 1 (2) (1) REMOVING AND REPLACING REFRIGERATOR DOORS (5) (6) Rivet (7) (1) (2) (4) (5) Type 1 (3 ) Type 2 1. Open the door. Remove the top hinge cover screw (1). 2. Use a flat blade screwdriver to pry back the hooks (not shown) of the hinge cover (2) from the top of the refrigerator cabinet (2). Lift up the cover. 3. Disconnect all the wire harnesses (3). 4. Remove the grounding screw (4). 5. Rotate hinge lever (5) counterclockwise. Lift the top hinge (6) free of the hinge lever latch (7). NOTE: Regardless of hinge lever type, removal process is the same. To remove the right (refrigerator) door: (3 ) (7) (6) Type 1 Before removing the doors, remove the base grille. See BASE GRILLE INSTALLATION for reference. (5) (3) (4) Rivet CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward. (4) (5) Type 2 6. Lift the door from the lower hinge pin being careful to pull the water lines through the lower hinge pin. 7. Place the door, inside facing up, on a nonscratching surface. Reinstalling the right (refrigerator) door 1. Open the door. Remove the top hinge cover screw (1). 2. Use a flat blade screwdriver to pry back the hooks (not shown) of the hinge cover (2) from the top of the refrigerator cabinet. Lift up the cover. 3. Rotate the hinge lever (3) clockwise. Lift the top hinge (4) free of the hinge lever latch (5). (2) (1) (3) NOTE: Regardless of hinge lever type, removal process is the same. (3 ) (4) (5) (4) 4. Lift the door from the lower hinge pin. 5. Place the door, inside facing up, on a nonscratching surface. Type 1 Rivet (5) Type 2 1. Place the door onto the lower hinge pin. 2. Fit top hinge (4) over hinge lever latch (5) into place. Rotate lever (3) counterclockwise to secure hinge. CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward. NOTE: Regardless of hinge lever type, reinstallation process is the same. Removing the left (freezer) door with water line connection. • Pull up the water feed tube while pressing the area (Figure 1) as shown in the figure below. 3. Hook tab on switch side of corner under edge of wire opening in cabinet top. Position cover (2) into place. Insert and tighten cover screw (1). NOTE: If a tube end is deformed or abraded, trim the part away. Disconnecting the tube under the door causes about 0.13 gallons (0,5 liters) water to flow out. Put a large container at end of tube to prevent water from draining onto the floor. 8 REFRIGERATOR INSTALLATION Reinstalling the left (freezer) door Height difference (2) (1) Height difference Right leveling leg (3) (4) (7) C CF F C F H (5) (6) (5) (6) (7) Rivet Type 1 Type 2 Type 2 Adjusting tools: 5/16” (8 mm) wrench and 3/4” (19 mm) wrench 1. Feed the water tubes through the lower hinge pin and place the door onto the lower hinge pin. 2. Fit top hinge (6) over hinge lever latch (7) and into place. Rotate lever (5) clockwise to secure hinge. Height difference NOTE: Regardless of hinge lever type, reinstallation process is the same. Keeper Nut Wrench Height Adjustment difference hinge pin Up Down 3. Install the grounding screw (4) and connect all the wire harnesses (3). 4. Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1). 5. Reconnect the water tubes by inserting the tubes into the connectors. CFC F C H F Using a 3/4” (19 mm) wrench, turn the keeper nut clockwise to loosen the keeper nut. Collet Using a 5/16” (8 mm) wrench, turn the adjustment hinge pin clockwise or counterclockwise to level the refrigerator and freezer door. Tube Insert Line After setting level door, turn the keeper nut counterclockwise to tighten. DOOR ALIGNMENT CAUTION: Do not overtight the door adjustment screw. The hinge pin can be pulled out. (Adjustable range of height is a maximum of 1/2” (1.27 cm)). Remove the base grille before adjusting the doors. See BASE GRILLE INSTALLATION for reference. Two methods of door alignment are available based on the amount of adjustment needed and installation requirements. AFTER LEVELING THE DOOR HEIGHT Confirm all legs are in contact with the floor. Type 1 Adjusting tool: Flat blade screwdriver If the freezer compartment door is lower than the refrigerator compartment door, level them by inserting a flat blade screwdriver into the groove of the left leveling leg and rotating it clockwise. Height difference Left leveling leg Height difference CCF F C F H If the freezer compartment door is higher than the refrigerator compartment door, level them by inserting a flat blade screwdriver into the groove of the right leveling leg and rotating it clockwise. 9 REFRIGERATOR INSTALLATION CONNECTING THE WATER LINE To determine how much tubing you need, measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then add 8 feet (2,4 m). Be sure there is sufficient extra tubing (about 8 feet [2,4 m] coiled into 3 turns of about 10” [25 cm] diameter) to allow the refrigerator to move out from the wall after installation. Be sure that the kit you select allows at least 8 feet (2,4 m) as described above. NOTE: Water line installation is needed when the Automatic Icemaker and/or Water Dispenser features are available on your product. BEFORE YOU BEGIN This water line installation is not warranted by the refrigerator or icemaker manufacturer or seller. Follow these instructions carefully to minimize the risk of expensive water damage. Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator. • A cold water supply. The water pressure MUST be between 20 and 120 PSI (1,4 bar and 8,2 bar) on models without a water filter and between 40 and 120 PSI (2,8 bar and 8,2 bar) on models with a water filter. • Power drill. To prevent burns and product damage, do not hook up the water line to the hot water line. • 1/2” (12,7 mm) or Adjustable Wrench. If you use your refrigerator before connecting the water line, make sure the icemaker power switch is in the OFF (O) position. Do not install the icemaker tubing in areas where temperatures fall below freezing. When using any electrical device (such as a power drill) during installation, be sure the device is double insulated or grounded in a manner to prevent the hazard of electric shock, or is battery-powered. All installations MUST be in accordance with local plumbing code requirements. NOTE: Wear eye protection. • Flat head and Phillips screwdrivers. • Two 1/4” (6,35 mm) outer diameter compression nuts and 2 ferrules (sleeves) to connect the copper tubing to the shutoff valve and the refrigerator water valve. • If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. • If a reverse osmosis water filtration system is connected to your cold water supply, the water line installation is not warranted by the refrigerator or icemaker manufacturer or seller. Follow next instruction carefully to minimize the risk of expensive water damage. • If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 PSI (2,8 kg•f/cm² ~ 4,2 kg•f/ cm² , less than 2~3 sec to fill a cup of 7 oz. capacity). • Shutoff valve to connect to the cold water line. The shutoff valve should have a water inlet with a minimum inside diameter of 5/32”(3,96 mm) at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. If the water pressure from the reverse osmosis system is less than 21 PSI (1,5 kg•f/cm², more than 4 sec to fill a cup of 7 oz. capacity): • Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary. • Allow the storage tank on the reverse osmosis system to refill after heavy usage. • If the issue about water pressure from reverse osmosis remains, call a licensed, qualified plumber. INSTALLATION INSTRUCTIONS WARNING: Connect to potable water supply only. 1. SHUTOFF THE MAIN WATER SUPPLY Turn on the nearest faucet to relieve the pressure on the line. 2. CHOOSE THE VALVE LOCATION Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom, to avoid drawing off any sediment from the water pipe. WHAT YOU WILL NEED • Copper Tubing, 1/4” (6,35 mm) outer diameter to connect the refrigerator to the water supply. Be sure both ends of the tubing are cut square. 10 REFRIGERATOR INSTALLATION 7. CONNECT THE TUBING TO THE VALVE Place the compression nut and ferrule (sleeve) for copper tubing onto the end of the tubing and connect it to the shutoff valve. Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely. 3. DRILL THE HOLE FOR THE VALVE Drill a 1/4” (6,35 mm) hole in the water pipe using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe. Take care not to allow water to drain into the drill. Failure to drill a 1/4” (6,35 mm) hole may result in reduced ice production or smaller cubes. Saddle-Type Shutoff Valve NOTE: Licensed plumbers MUST use only cooper tubing NDA tubing #49595 or 49499 or Cross Link Polyethylene (PEX) tubing. Packing Nut Outlet Valve 4. FASTEN THE SHUTOFF VALVE Fasten the shutoff valve to the cold water pipe with the pipe clamp. Pipe Clamp Saddle-Type Shutoff Valve Ferrule(sleeve) NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber. 8. FLUSH OUT THE TUBING Turn the main water supply on and flush out the tubing until the water is clear. Shut the water off at the water valve after about one quart (1 L) of water has been flushed through the tubing. Vertical Cold Water Pipe NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber. 9. CONNECT THE TUBING TO THE REFRIGERATOR 5. TIGHTEN THE PIPE CLAMP Tighten the clamp screws until the sealing washer begins to swell. NOTES: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet. NOTE: Do not overtighten or you may crush the tubing. Pipe Clamp Compression Nut • If your refrigerator does not have a water filter, we recommend installing one. If your water supply has sand or particles that could clog the screen of the refrigerator’s water valve, install the filter in the water line near the refrigerator. Washer Inlet End Clamp Screw • Do not uses old hoses; only use new hoses provided by the manufacturer. 1. Remove the plastic flexible cap from the refrigerator connection. 6. ROUTE THE TUBING Route the tubing between the cold water line and the refrigerator. 2. Place the compression nut and ferrule (sleeve) onto the end of the tubing. (See figure 1) 3. Insert the end of the tubing into the connection as far as possible. While holding the tubing, tighten the fitting. Route the tubing through a hole drilled in the wall or floor (behind the refrigerator or adjacent base cabinet) as close to the wall as possible. CAUTION: Check to make sure that leaks are not NOTE: Be sure there is sufficient extra tubing [about 8 feet (2,4 m) coiled into 3 turns of about 10” (25 cm) diameter] to allow the refrigerator to move out from the wall after installation. occurring in the water line. 11 REFRIGERATOR INSTALLATION Back of refrigerator Tubing Clamp ¼” (6,35 mm) Tubing ¼” (6,35 mm) Compression Nut Ferrule (sleeve) Figure 1 Refrigerator Connection Fasten the tubing into the tubing clamp attached to the back of the refrigerator. First, loosen the screw fastening the clamp. Next, insert the tubing in the groove. Finally, re-fasten the screw. 10. PLUG IN THE REFRIGERATOR Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall. 11. START THE ICEMAKER Set the icemaker power switch to the ON (I) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically if the icemaker power switch is in the ON (I) position. 12 REFRIGERATOR FEATURES Use this page to become more familiar with the parts and features. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model. A Freezer Door Rack H Refrigerator Lamp B Automatic Icemaker I Water Filter The ice is produced in the icemaker and sent to the dispenser. J Refrigerator Shelf C Freezer Lamp K D Freezer Shelf E Drawer F Base Grille G Dairy Corner For storage of dairy products such as butter and cheese. 13 Snack Pan For storage of meat or fresh food. L Refrigerator Door Rack M Vegetable Drawer USING YOUR REFRIGERATOR ENSURING PROPER AIR CIRCULATION CONTROL PANEL FEATURES In order to ensure proper temperatures, air MUST flow between the refrigerator and freezer sections. Press the button for the desire function to review and select other settings. LED DISPLAY The LED display shows the temperature settings, dispenser options, and the water filter door alarm, and status messages. • Cool air enters the freezer through the vents located at the top of the compartment and exits through the vents located behind the freezer drawers. • Cool air from the freezer section enters the fresh food section through vents located at the top of the compartment. The air moves down throughout the compartment and exits through the vents located behind the crisper drawers. ICE TYPE The ICE TYPE is used to select cube, ice or crushed ice. NOTE: Hold the glass or other container in place for a couple of seconds after dispensing ice or water to catch the last few cubes or drops. The dispenser is designed not operate while either refrigerator door is open. FREEZER Press the FREEZER button to adjust the temperature in the freezer compartment. REFRIGERATOR Press the REFRIGERATOR button to adjust the temperature in the refrigerator compartment. NOTE: The actual inner temperature varies depending on the food status, since the indicated temperature setting is the target temperature an not the actual temperature within the refrigerator. • Do not block any of these vents with food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur. IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You MUST thoroughly clean both sections to eliminate odors. To prevent odor transfer and dried out food, wrap or cover foods tightly. (See the Food Storage Guide section for details.) Initially set the REFRIGERATOR CONTROL at 37 °F (3°C). Leave it at these settings for 24 hours (one day) to stabilize. Then adjust the compartment temperature as ilustrates above. NOTE: When press simultaneously the FREEZER button and the REFRIGERATOR button for more than 5 seconds, the temperature display will change from Fahrenheit to Celsius or vice versa. NOTE: If you close the refrigerator door, you may see the freezer door open and close again due to pressure from internal air flow. ICE PLUS Press this button once to activate the increased ice making function. The ICE PLUS icon on the display panel will illuminate when activated. The Ice Plus function runs the freezer compartment at the coldest settings for a 24 hour period to increase ice making. Press the button again to cancel the Ice Plus function. PRIOR TO USE 1. Clean your refrigerator thoroughly and wipe off dust accumulated during shipping. 2.Install accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment. 3.Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use. 14 USING YOUR REFRIGERATOR LIGHT/FILTER Ice type indicator Shows the type of ice, crushed or cube, or water that the dispenser will dispense. The LIGHT/FILTER button controls the lamp in the dispenser, resets the water filter replacement indicator when the filter has been replaced. The water filter needs replacement once wvery six months. Filter month indicator becomes “0” to let you know when replace filter. Press and hold the LIGHT/FILTER button for more than 3 seconds to reset the filter month indicator to six after the water filter has been replaced. Freezer temperature control Shows the temperature in the freezer, Celsius or Fahrenheit. ALARM/LOCK Refrigerator temperature Shows the temperature in the refrigerator, Celsius or Fahrenheit. Press this button to control the door-open alarm. Press and hold the ALARM/LOCK button for 3 seconds to lock the dispenser and all the other control panel functions. Press and hold again for 3 seconds to unlock. The ALARM/LOCK button also controls the door alarm that sounds three times in 30 seconds intervals when a compartment door is left open for more than 60 seconds. The alarm stop sounding when the door is closed. Press the ALARM/LOCK button once to activate or deactivate the door alarm function. Ice Plus When this button is on the screen will show this has been activated. DISPLAY OFF MODE Dispenser light When this button is in function on the light will show this has been activated. When the dispenser light is on the display will indicate this feature. To activated Display Off Mode press and hold ICE PLUS and FREEZER key over 5 seconds until lights will turn on and after 20 seconds of inactivity the lights will turn off automatically. To exit Display Off Mode press and hold ICE PLUS and FREEZER key over 5 seconds until lights will tilt. Display Off Mode doesn not affect the temperature control settings of the unit. Door alarm indicator This indicator shows that the door-open warning alarm is activated. Water filter status This light shows the filter’s status. See the filter’s configurations. Lock status This light shows the actual status of the control panel, in which the lock function is on. DIAGNOSIS FUNCTION (FAILURE DETECTION) Diagnosis function automatically detects failure during the normal use of refrigerator. If you refrigerator fails, do not turn off the power. Instead, contact a local Authorized service center or call our support line for assistance. Turning off the appliance will make it more difficult for the service technician to determine the problem. 15 USING YOUR REFRIGERATOR ADJUSTING CONTROL SETTINGS ICEMAKER OPERATION Give the refrigerator time to cool down completely before making final adjustments. It is best to wait 24 hours before doing this. The initial settings mentioned in CONTROL PANEL FEATURES section should be correct for normal household refrigerator use. The refrigerator control functions as the thermostat for the entire appliance (refrigerator and freezer sections). The colder the setting, compressor will the longer the run to keep the temperature colder. The freezer control adjusts the cold air flow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the freezer compartment to make it colder. If you need to adjust temperatures in the refrigerator or freezer, start by adjusting the refrigerator and allow 24 hours for the temperature to stabilize. If it is too warm or too cold, then adjust the freezer control. Use the settings listed in the chart below as a guide. Always remember to wait at least 24 hours between adjustments. CONDITION/REASON: RECOMMENDED ADJUSTMENT: REFRIGERATOR section too warm –Door opened often –Large amount of food added –Room temperature very warm Set the Refrigerator control to the next colder level; wait 24 hours for the new setting to take full effect before making another adjustment. FREEZER section too warm/ ice not made fast enough –Door opened often –Large amount of food added –Very cold [room 55°F (13°C)] room temperature (Compressor does not cycle often enough). –Heavy ice usage –Air vents blocked by items Set the Freezer control to the next colder level; wait 24 hours for the new setting to take full effect before making another adjustment. REFRIGERATOR section too cold –Controls not set correctly for your conditions Set the Refrigerator control to the next warmer level; wait 24 hours for the new setting to take full effect before making another adjustment. FREEZER section too cold –Controls not set correctly for your conditions Set the Freezer control to the next warmer level; wait 24 hours for the new setting to take full effect before making another adjustment. WARNING PERSONAL INJURY HAZARD Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in. A newly-installed refrigerator may take 12 to 24 hours to begin making ice. The icemaker will produce 8 cubes per cycle, approximately 100-120 cubes in a 24 hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions. If the refrigerator is used before the water connection is made to the icemaker, set the power switch to OFF (O). Throw away the first few batches of ice to allow the water line to clear. Move items out of airstream Be sure nothing interferes with the sweep of the feeler arm. When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be stuck together. If ice is not used frequently, old ice cubes will become cloudy, taste stale, and shrink. 16 USING YOUR REFRIGERATOR FOOD STORAGE GUIDE STORING FROZEN FOOD Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness. NOTE: For further information about preparing food for freezing or food storage times, check a freezer guide or a reliable cookbook. ITEMS HOW TO STORE Butter or margarine Keep opened butter in a covered dish or closed compartment. When storing an extra supply, wrap in freezer packaging and freeze. Cheese Store in the original wrapping until you are ready to use it. Once opened, rewrap tightly in plastic wrap or aluminum foil. Milk Wipe milk cartons. For best storage, place milk on interior shelf, not on door shelf. Eggs Store in original carton or on interior shelf, not on door shelf. Fruit Wash, let dry, and store in refrigerator in plastic bags or in the crisper. Do not wash or hull berries until you are ready to use them. Sort and keep berries in their original container in a crisper drawer, or store in a closed and sealed paper bag on a refrigerator shelf. Leafy vegetables Packaging Successful freezing depends on correct packaging. When you close and seal the package, it must not allow air or moisture in or out. If it does, you could have food odor and taste transfer throughout the refrigerator and also dry out frozen food. Packaging recommendations: • • • • • • Follow package or container instructions for proper freezing methods. Do not use • Bread wrappers • Containers without tight lids • Wax paper or wax-coated freezer wrap • Thin, semi-permeable wrap CAUTION: Do not keep beverage cans or plastic food containers in the freezer compartment. They may burst if they freeze. Remove store wrapping and trim or tear off bruised and discolored areas. Wash in cold water and drain. Place in plastic bag or plastic container and store in crisper drawer. Vegetables with skins (carrots, peppers) Place in plastic bags or plastic container and store in crisper drawer. Fish Use fresh fish and shellfish the same day purchased. Leftovers Cover leftovers with plastic wrap or aluminum foil. Plastic containers with tight lids can also be used. Rigid plastic containers with “tight-fitting lids” Straight-sided canning/freezing jars Heavy-duty aluminum foil Plastic-coated paper Non-permeable plastic wraps Specified freezer-grade self-sealing plastic bags Freezing Your freezer will not quick-freeze any large quantity of food. Do not put more unfrozen food into the freezer than will freeze within 24 hours [no more than 2 to 3 lbs of food per cubic foot (0,9 to 1,35 kg per cubic meter) of freezer space]. Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room at the front so the door can close tightly. Food storage times will vary according to the quality and type of food, the type of packaging or wrap used (airtight and moisture-proof) and the storage temperature. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals. NOTE: Allow hot foods to cool at room temperature for 30 minutes, then package and freeze. Cooling hot foods before freezing saves energy. 17 USING YOUR REFRIGERATOR WATER AND ICE DISPENSER • Hold the ice storage bin and pull it out while slightly lifting it shown in the figure. • To assemble the ice storage bin, push it while slightly lifting it . Your refrigerator has a mechanism that dispatch cool water and ice cubes without open the door. • Tray can be easily removed by pressing and pulling it. • Tilt up the front of tray slightly and snap the ribs into the holes to reinstall the tray. • Make sure it is fully engaged into the auger drive . ICEMAKER COVER If you need access to the icemaker, follow these steps: WARNING • Lift the ice shelf and pull it out as shown in the figure below. Do not put your hands into the water & ice dispenser opening. Doing so may cause an injury to your hand. CAUTION When opening the container with the small opening, use it near the opening of the water or ice dispenser as close as possible. DOOR RACK AND SUPPORT Your refrigerator and freezer features racks which can easily be arranged for packaged products. • Lift the door rack holding both sides and pull it out in direction. • Push Water Switch Press the push water switch or activate water button with a plass or the water container and chilled water will be dispensed. When the water switch or water button is pressed, the light will be illuminated. SNACK PAN • To remove the snack pan cover, pull out the snack pan compartment a bit to the front , then lift the front part of the snack pan compartment later raises a little the snack pan compartment until it leaves the top of the shelf as shown in , and take it out. ICE STORAGE BIN The ice bin stores the ice cubes made by the icemaker. If you need to remove the ice storage bin, do so as follows: NOTE: Use both hands to remove the ice bin to avoid dropping it. If the ice bin does not slide into place easily, twist the drive device slightly. 18 USING YOUR REFRIGERATOR REFRIGERATOR SHELVES CRISPER AND CRISPER COVER CAUTION The crisper allows for better conservation of fruits and vegetables. • To remove the crisper compartment cover, pull out the crisper compartment a bit to the front , lift the front part of the cover as shown in , and take it out . Make sure to keep shelf horizontal while removing; otherwise it may drop. The refrigerator compartment shelf is adjustable so that you can place it at a height according to space requirement of foods. Sliding out Shelf: • Pull the shelf towards you , then lift both front and rear while taking it out . • To remove the crisper compartment, pull the crisper compartment to the front until it stops. Then slightly lift the crisper compartment while pulling it out . CAUTION Be careful when pulling out the shelf. If you apply too much force, it may hit the refrigerator door and damage it or you could hurt yourself. Door CAUTION When removing the crisper compartment you will see the water tank. Do not remove it, or water leakage may result. The water tank is not a removable part. Fixed Shelf: • Lightly lift up the front part of the shelf to pull it towards you , then take it out while lifting the rear part of shelf . Tank You can control the amount of humidity in the moisture sealed crispers. Adjust the control to any setting between “HIGH” and “LOW”. FREEZER SHELF “HIGH”: Keeps moist air in the crisper for best storage of fresh, leafy vegetables. “LOW”: Keeps moist air out of the crisper for best storage of fruits or vegetables with skins. To assemble or disassemble the freezer shelf, follow the next steps: • Lift the left part of the shelf a bit. Lift it to the direction , push the right part to the direction , and take it out. 19 FILTER WATER FILTER Installing the water filter Before removing or installing water filter: 1. Remove the red cap from the filter. 1. IMPORTANT: Turn off household water supply. 2.Take out the top shelf and move it to the lowest level. facing 2. Hold the filter with the unlock symbol towards you as shown in the picture below. Insert the filter into the filter receptacle on the right side of the refrigerator compartment. Removing the water filter: 1. For filter replacement, remove old filter by turning it counterclockwise and pulling it down. 3. Push the water filter up into the filter receptacle and rotate it clockwise to lock it into place. Once installed correctly, the lock symbol should be facing you and you should not be able to rotate the filter clockwise any more. NOTE : The substitute cap must be retained for the future. If the filter is removed and not replaced, it is necessary to reinstall the substitute cap to prevent water leaks from the filter housing. NOTE: After installation, if you notice that the lock symbol is not facing you or you can continue to rotate the filter clockwise; remove the filter and repeat installation to prevent water leaks. After installing water filter: A 1. Replace the shelf to the initial position. 2. After installing filter, turn on household water supply. 3. Dispense 2.5 gallons (9,46 liters) of water to purge the system, depressing and releasing the dispenser pad in cycles of 30 seconds ON and 60 seconds OFF. Open the refrigerator door and check the shelf area for water leaks. To purchase or replace water filters, call your Service Center. Refer to the Warranty Card to obtain the telephone number of the Service Center near you and ask for part no. 5231JA2002A or ADQ72910901. 20 FILTER Performance Data Sheet Models Number 5231JA2002A-S Use with replacement cartridge 5231JA2002A This system has been tested according to NSF/ANSI Standards 42 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ANSI 42. System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor and Nominal Particulate Class III. * Capacity: 500 gal (1,892 L) Average Influent Concentration Substance Nominal Particulate › 24,333 ‹ Class I Particle size: 0.5 to 1 um Chlorine taste and odor Class III 1.9 Influent Challenge Avg. Product Average Concentration. Water % Units apply to Concentration Reduction each row At least 10,000 particles/ml 2.0 mg/L ± 10% NSF % reduction req. or Max. permissible product water concentration 915 96 ≥ 85% 0.07 96.4 ≥ 50% Note that while the testing was performed under standard laboratory conditions, actual performance may vary. CAUTION Application Guidelines / Water Supply Parameters Service flow 0.5 gpm (1.89 lpm) Water pressure 20 - 125 psi (138 - 862 kPa) To reduce the risk of property damage due to water leakage: • Read and follow Use instructions before installation and use of this system. • Install on COLD water lines only. • Comply with all state and local plumbing codes. • Install a pressure limiting device and water hammer arrester for inlet water pressures exceeding 80 psi (552 kPa). Refer to Uniform Plumbing Code, Sections 608.2 and 609.10. • Never install or operate where inlet water pressure may exceed 120 psi (827 kPa). • Protect filter from freezing. Remove filter in temperatures below 33° F (0.6° C). • Replace cartridge at specified service interval. Cartridge MUST be replaced at least every 6 months. Water temperature 33ºF - 100ºF (0.6ºC - 38ºC) WARNING To reduce the risk associated with ingestion of contaminants due to use with water that is microbiologically unsafe or of unknown quality. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems must be installed and operated in accordance with manufacturer’s recommended procedures and guidelines To purchase or replace water filters call your Service Center. Refer to the Warranty Card to obtain the telephone number of the Service Center near you and ask for part no. 5231JA2002A or ADQ72910901. 21 CARE AND CLEANING PLASTIC PARTS (covers and panels) WARNING Do not use window sprays, abrasive cleaners, or flammable fluids. These can scratch or damage the material. Use a clean sponge or soft cloth and a mild detergent in warm water. Wash, rinse and dry all surfaces thoroughly. EXPLOSION HAZARD Use non-flammable cleaner. Failure to do so can result in death, explosion, or fire. BACK COVER WARNING Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to do so could result in death or serious injury. GENERAL CLEANING TIPS • Unplug refrigerator or disconnect power. • Remove all removable parts, such as shelves, crispers, etc. Refer to sections in Using Your Refrigerator for removal instructions. • Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. • Hand wash, rinse and dry all surfaces thoroughly. • Plug in refrigerator or reconnect power. NOTE: Back cover should only be removed by a qualified technician. Clean the vents on the back cover. Use a vacuum cleaner with the brush attachment, at least twice a year to keep your refrigerator working efficiently. BACK COVER OUTSIDE LAMP REPLACEMENT Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth. WARNING ELECTRICAL SHOCK HAZARD Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Do not use wax on stainless steel exteriors. Use a product specially designed for polishing stainless steel appliances, or clean with a soft cloth or clean sponge and a mild detergent dissolved in warm water. Dry thoroughly with a soft cloth. NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. Avoid door surface contact with chemical products that contain Phosphate or Chlorine, such as degreasers, detergents (containing TSP) and bleaches. To change the refrigerator and freezer lamp: 1. Unplug the refrigerator. 2. Remove cover lamp by pressing upward on bottom and rotating outward . 3. Remove bulb with a conterclockwise movement. 4. Replace with 40 watt (maximum) appliance bulb. 5. Reinstall cover lamp and plug again the refrigerator. INSIDE WALLS NOTE: Allow freezer to warm up so cloth will not stick. To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so it does not scratch the surfaces of the refrigerator. DOOR LINERS AND GASKETS POWER INTERRUPTIONS Do not use cleaning waxes, concentrated detergent, bleaches, or cleaners containing petroleum on plastic refrigerator parts. Use a clean sponge or soft cloth and a mild detergent in warm water. Wash, rinse and dry all surfaces thoroughly. 1. If the power will be out for 24 hours or less, keep all refrigerator doors closed to help foods stay cold and frozen. 2. If the power will be out for more than 24 hours: a) Remove all frozen food and store it in a frozen food locker. 22 CARE AND CLEANING If you choose to turn the refrigerator OFF before you leave, follow these steps. 1. Remove all food from the refrigerator and empty ice bin. 2. Unplug refrigerator. 3. Clean refrigerator, wipe, and dry well. 4. Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up. OR b) Place 2 lbs. (1 kg) of dry ice in the freezer for every cubic foot (28 L) of freezer space. This will keep the food frozen for two to four days. While handling dry ice, wear gloves to protect your hands from frostbite. WARNING SUFFOCATION HAZARD When using dry ice, provide adequate ventilation, Dry ice is frozen carbon dioxide (CO2). When it vaporizes, it can displace oxygen, causing dizziness, light-headedness, unconsciousness and death by suffocation. Open a window and do not breathe the vapors. WHEN YOU MOVE When you are moving your refrigerator to a new home, follow these steps to prepare it for the move. 1. Remove all food from the refrigerator and pack all frozen food in dry ice. 2. Unplug refrigerator. 3. Clean refrigerator, wipe, and dry well. 4. Empty water from the defrost pan. 5. Clean, wipe and dry thoroughly. 6. Take out all removable parts, wrap them well and tape together so they don’t shift and rattle during the move. Refer to sections in Using your Refrigerator for removal instructions. 7. Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the leveling legs all the way so they don’t scrape the floor. See the DOOR ALIGNMENT section. 8. Tape the doors shut and tape the power cord to the refrigerator cabinet. OR c) If neither a food locker nor dry ice is available, consume or dispose of food at once. REMEMBER: In a power failure, a full freezer stays cold longer than a partially filled one. If you see that food contains ice crystals, it may be affected. If the condition of the food is poor, or if you feel it is unsafe, dispose of it. WARNING DO NOT refreeze frozen foods which have thawed completely. The United States Department of Agriculture in Home and Garden Bulletin No. 69 says: ...You may safely refreeze frozen foods that have thawed if they still contain ice crystals or if they are still cold-below 40 °F (4 °C). ...Thawed ground meats, poultry or fish that have any off-odor or off-color should not be frozen and should not be eaten. Thawed ice cream should be discarded. If the odor or color of any food is poor or questionable, dispose of it. The food may be dangerous to eat. Even partial thawing and refreezing reduces the eating quality of foods, particularly fruits, vegetables and prepared foods. The eating quality of red meats is affected less than that of many other foods. Use refrozen foods as soon as possible to save as much of their quality as you can. When you get to your new home, put everything back and refer to the REFRIGERATION INSTALLATION section for setup instructions. WHEN YOU SHOULD SET THE ICE MAKER POWER SWITCH TO OFF (O) • When the water supply will be shut off for several hours. • When the ice storage bin is removed for more than a minute or two. • When the refrigerator will not be used for several days. NORMAL SOUNDS YOU MAY HEAR WHEN YOU GO ON VACATION • The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the ON position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, move the power switch to OFF position. If you choose to leave the refrigerator ON while you are away, follow these steps to prepare your refrigerator before you leave. 1. Use up any perishables and freeze other items. 2. Empty the ice bin. 3. Turn OFF the Icemaker. NOTE: If the ambient temperature will drop below freezing, have a quailed service technician drain the water supply system (on some models) to prevent serious property damage due to possible flooding from ruptured water lines or connections. NOTE: Keep the power switch in the ON position before the water line is connected can damage the icemaker. • You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills. 23 TROUBLESHOOTING GUIDE UNDERSTANDING SOUNDS YOU MAY HEAR • The defrost timer will click when the automatic defrost cycle begins and ends. The thermostat control (or refrigerator control, depending on the model) will also click when cycling on and off. • Rattling noises may come from the flow of refrigerant, the water line, or items stored on top of the refrigerator. • Your refrigerator is designed to run more efficiently to keep your food items at the desired temperature. The high efficiency compressor may cause your new refrigerator to run longer than your old one, and you may hear a pulsating or high-pitched sound. • You may hear the evaporator fan motor circulating the air through the refrigerator and freezer compartments. • As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your refrigerator. • Contraction and expansion of the inside walls may cause a popping noise. • Water dripping on the defrost heater during a defrost cycle may cause a sizzling sound. • You may hear air being forced over the condenser by the condenser fan. • You may hear water running into the drain pan during the defrost cycle. Your new refrigerator may make sounds that your old one did not make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they actually are. The following list describes the kinds of sounds and what may be making them. Problem REFRIGERATOR DOES NOT OPERATE Possible causes Solutions • The power supply cord is unplugged. • A household fuse has blown or circuit breaker tripped. •The refrigerator control is set to the OFF position. •Refrigerator is in the defrost cycle. • Firmly plug the cord into a live outlet with proper voltage. • Replace the fuse or reset the circuit breaker. • Refer to CONTROL PANEL FEATURES. • Wait about 30 minutes for defrost cycle to end. VIBRATION OR RATTLING NOISE • The refrigerator is not resting solidly on the floor. • Floor is weak or uneven or leveling legs need adjusting. See DOOR ALIGNMENT Section. LAMPS DO NOT WORK • The power supply cord is unplugged. • Firmly plug the cord into a live outlet with proper voltage. • Unplug the refrigerator. Gently remove the bulb and reinsert. Then plug in refrigerator and reset the refrigerator control. • Replace with an appliance bulb of the same wattage, size and shape available at your local hardware store ( See the LAMP REPLACEMENT section). Unplug the refrigerator prior to replacement. • Light bulb is loose in the socket. • Light bulb has burned out. 24 TROUBLESHOOTING GUIDE Problem COMPRESSOR MOTOR SEEMS TO RUN TOO MUCH Possible causes Solutions • The refrigerator that was replaced was an older model. • The room temperature is hotter than normal. • The refrigerator was recently plugged in and the refrigerator control was set correctly. • The door is opened often or a large amount has just been added. • Modern refrigerators with more storage space require more operating time. • The motor will run longer under warm conditions. At normal room temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more often. • The refrigerator will take up to 24 hours to cool completely. • Adding food and opening the door warms the refrigerator. It is normal for the refrigerator to run longer in order to conserve energy, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find and close the door as soon as the food is removed. See the FOOD STORAGE GUIDE section. • See the ADJUSTING CONTROL SETTINGS • The refrigerator control was not set Section. correctly for the surrounding conditions. • Push the doors firmly shut. If they will not • The doors are not closed completely. shut all the way, see Doors will not close completely below. •This prevents air transfer and makes the • The condenser coils are dirty. motor work harder. Clean the condenser coils. Refer to the CARE AND CLEANING section. • See the REFRIGERATOR INSTALLATION AND DOOR ALIGNMENT section to level refrigerator. • Rearrange food containers to clear door and • Food packages are blocking the door door shelves. open. • The ice bin, crisper cover, pans, shelves, • Push bins all the way in and put crisper cover, pans, shelves and baskets into their correct door bins or baskets are out of position. positions. See the USING YOUR REFRIGERATOR Section. • Clean gaskets and the surface that they • The gaskets are sticking. touch. Rub a thin coat of paraffin wax on the gaskets after cleaning. • Level the refrigerator. Refer to the DOOR • The refrigerator wobbles or seems ALIGNMENT section. unstable. • Remove and replace the doors according to • The doors were removed during the REMOVING AND REPLACING product installation and not properly REFRIGERATOR DOORS section, or call replaced. qualified service technician. DOORS WILL NOT CLOSE COMPLETELY • The refrigerator is not level. THE DOORS ARE DIFFICULT TO OPEN • The gaskets are dirty or sticky. • The door is reopened within a short time after having been opened. 25 • Clean gaskets and the surfaces that they touch. Rub a thin coat of appliance polish or kitchen wax on the gaskets after cleaning. •When you open the door, warmer air enters the refrigerator. As the warm air cools, it can create a vacuum. If the door is hard to open, wait 5 minutes to allow the air pressure to equalize, then see if it opens more easily. TROUBLESHOOTING GUIDE Problem TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILDUP Possible causes Solutions • The doors are opened often. • The control is not set correctly for the surrounding conditions. • A large amount of food has just been added to the refrigerator or freezer. • The food is not packaged correctly. •The doors are not closing completely. • When the door is opened, warm humid air is allowed into the refrigerator. The more the door is opened, the faster the humidity builds up, and the more warm air the refrigerator must cool. In order to keep the refrigerator cool, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find and close the door as soon as the food is removed. • Refer to the CONTROL PANEL FEATURES section. Wait 24 hours for temperatures to stabilize or even out. If the temperature is too cold or too warm, move the dial one number at a time. • Adding food warms the refrigerator. It can take a few hours for the refrigerator to return to normal temperature. • Wrap food tightly and wipe off damp containers prior to storing in the refrigerator to avoid moisture accumulation. If necessary, repackage food according to the guidelines in the FOOD STORAGE GUIDE section. •See “Doors will not close completely”. • In humid weather, air carries moisture into refrigerator when doors are opened. • It is normal for droplets to form on the back • A self-defrost cycle was completed. wall after the refrigerator self-defrosts. • Locate air vents by using your hand to sense • The air vents are blocked. Cold air airflow and move all packages that block circulates from the freezer to the fresh vents and restrict airflow. Refer to ENSURING food section and back again through air PROPER AIR CIRCULATION section for the vents in the wall dividing the two location of air vents. sections. • The weather is humid. CUBES PRODUCED BY ICEMAKER ARE TOO SMALL • Water shutoff valve connecting refrigerator to water line may be clogged. • Call a plumber to clear the valve. ICE HAS BAD TASTE OR ODOR • The icemaker was recently installed. • Discard first few batches of ice to avoid discolored or off-flavored ice. • Throw away old ice and make new supply. • Rewrap foods since odors may migrate to the ice if food is not wrapped properly. • A new filter may need to be installed to eliminate taste and odor problems. • See CARE AND CLEANING section. THERE IS WATER IN THE DEFROST DRAIN PAN • The refrigerator is defrosting. • It is more humid than normal. • The water will evaporate. It is normal for water to drip into the defrost pan. • Expect that the water in the defrost pan will take longer to evaporate. This is normal when it is hot or humid. THE REFRIGERATOR SEEMS TO MAKE TOO MUCH NOISE • The sounds may be normal for your refrigerator. • Refer to the UNDERSTANDING SOUNDS YOU MAY HEAR section. FROST OR ICE CRYSTALS ON FROZEN FOOD • The door is not closing properly. • The door is opened often. • See “Doors will not close completely” above. • When the door is opened, warm, humid air is allowed in the freezer resulting in frost. • The ice has been stored for too long. • The food has not been wrapped tightly in either compartment. • The water supply contains minerals such as sulfur. • The interior of refrigerator needs cleaning. • Ice storage bin needs cleaning. 26 • Empty and wash bin. Discard old cubes. TROUBLESHOOTING GUIDE Problem Possible causes Solutions THE ICEMAKER IS NOT PRODUCING ICE OR ICE CUBES ARE FREEZING TOO SLOWLY • The freezer temperature is cold enough to produce ice. • Wait 24 hours after hook-up for ice production. See the CONTROL PANEL FEATURES section. •Check to see if something is holding the door open. AUTOMATIC ICEMAKER DOES NOT WORK • Icemaker power switch on OFF (O) position. • Water supply turned off or not connected. • Freezer compartment too warm. • Door left open. • Piled up the cubes in the storage bin cause the icemaker to shut off. NOT DISPENSING ICE • All the doors are not closed completely. • The dispenser display is locked. • Ice is not selected on the dispenser. • The ice dispenser is not used often. • Ice bin is not installed correctly. • New installation. • Ice cubes are stuck in the delivery chute. •The ice dispenser is stalling while dispensing “crushed” ice. • Icemaker power switch in the OFF (O) position. • Water supply turned off or not connected. NOT DISPENSING WATER • The dispenser display is locked. • New installation. •Refrigerator or freezer doors are not closed properly. • Water supply turned off or not connected. • The water pressure is less than 40 PSI. • Home filter or reverse osmosis system is used. • The dispenser is not set for water dispensing. 27 •Move the switch to the ON (I) position. •See the CONNECTING THE WATER LINE section. •Wait 24 hours for the freezer to reach its ideal temperature. •Level cubes by hand or shake the bin ocasionally. • Ice will not dispense if any of the refrigerator doors are left open. • Press and hold the Lock button for 3 seconds to unlock the control panel and dispenser. • The dispenser can be set for ice or water. Make certain that the control panel is set for the proper operation. Press the dispenser button on the control panel to cycle through the ice and water options. • Check the ice bin for ice cubes clumping/ sticking together. If they are, break up the ice cubes allow for proper operation. • Be sure to install the ice bin firmly into position. • Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production. • Use a plastic utensil to clear the delivery chute. •Change the ice button from “crushed” to “cubed”. If cubed ice dispenses correctly, depress the button for“crushed” ice and begin dispensing again. • Move the switch to the ON (I) position. • See the CONNECTING THE WATER LINE section. • Press and hold the Lock button for 3 seconds to unlock the control panel and dispenser. • Flush and fill the water system. • Water will not dispense if any of the refrigerator doors are left open. • See the CONNECTING THE WATER LINE section. • The water pressure to the home affects the flow from the dispenser. • This can decrease water pressure. It is recommended not to connect the supply line to a reverse osmosis system for optimal operation. • The dispenser can be set for ice or water. Make certain that the control panel is set for the proper operation. Press the dispenser button on the control panel to cycle through the ice and water options. LG Customer Information Center 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your Product Online! www.lg.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2010:11:11 15:44:23-06:00 Creator : Adobe InDesign CS5 (7.0) Modify Date : 2011:01:13 15:51:04-06:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2011:01:13 15:51:04-06:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 2862 bytes, use -b option to extract), (Binary data 9999 bytes, use -b option to extract) Instance ID : uuid:0fbe5e80-95b3-4245-93b6-499521d20268 Document ID : xmp.did:B95974CC03C1DF11B091CDF61BDD9F5C Original Document ID : xmp.did:7AAF66DA58BFDF118A85B74283D7B523 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:7AAF66DA58BFDF118A85B74283D7B523, xmp.iid:FD7F98C76CBFDF118A85B74283D7B523, xmp.iid:FE7F98C76CBFDF118A85B74283D7B523, xmp.iid:91197CF489BFDF118A85B74283D7B523, xmp.iid:53DC5E0102C1DF11B091CDF61BDD9F5C, xmp.iid:54DC5E0102C1DF11B091CDF61BDD9F5C, xmp.iid:B95974CC03C1DF11B091CDF61BDD9F5C, xmp.iid:0360C78B1BC1DF11B091CDF61BDD9F5C, xmp.iid:FA0AF7230AC5DF11BD59EB8ACCF35AF6, xmp.iid:37EE4B25C9C5DF118B109F50677FAD47, xmp.iid:1A09574D88CADF11BA89FCA6F1F8DF2A, xmp.iid:A4261ABCF8D2DF11968DB242E5A8AA9E, xmp.iid:88DEE3A5FBD2DF11968DB242E5A8AA9E, xmp.iid:B5DCE2CBFDD2DF11968DB242E5A8AA9E, xmp.iid:C67761B3FED2DF11968DB242E5A8AA9E, xmp.iid:F4EDA961FFD2DF11968DB242E5A8AA9E, xmp.iid:7B84E08E13D3DF11968DB242E5A8AA9E, xmp.iid:4C808DB313D3DF11968DB242E5A8AA9E, xmp.iid:F0A62A9E1AD3DF11B2A98751F6DC16A8, xmp.iid:FC9426748ED5DF11B49EEAB8D3F1CB1F, xmp.iid:1A5A46A68ED5DF11B49EEAB8D3F1CB1F, xmp.iid:3D527F700CD6DF118EFD86AC5D327A5C, xmp.iid:2184735D1DD6DF118EFD86AC5D327A5C, xmp.iid:2684735D1DD6DF118EFD86AC5D327A5C, xmp.iid:17DAFA5C53E0DF119D13965A390E0383, xmp.iid:D83AA8A06EE0DF11966D9105F0BC2306, xmp.iid:FC288D2296E0DF1195ACD09BBF9A6614, xmp.iid:FD288D2296E0DF1195ACD09BBF9A6614, xmp.iid:514CDCA296E0DF1195ACD09BBF9A6614, xmp.iid:6155E81597E0DF1195ACD09BBF9A6614, xmp.iid:6455E81597E0DF1195ACD09BBF9A6614, xmp.iid:66148565A7EDDF11AFD0B753E2203BE4 History When : 2010:09:13 12:03:38-05:00, 2010:09:13 14:26:17-05:00, 2010:09:13 14:26:17-05:00, 2010:09:13 17:55:07-05:00, 2010:09:15 14:47-05:00, 2010:09:15 14:59:49-05:00, 2010:09:15 14:59:50-05:00, 2010:09:15 17:49:49-05:00, 2010:09:20 17:55:18-05:00, 2010:09:21 16:42:34-05:00, 2010:09:27 17:41-05:00, 2010:10:08 11:25:59-05:00, 2010:10:08 11:46:50-05:00, 2010:10:08 12:02:13-05:00, 2010:10:08 12:08:41-05:00, 2010:10:08 12:13:34-05:00, 2010:10:08 14:37:59-05:00, 2010:10:08 14:39:01-05:00, 2010:10:08 15:28:32-05:00, 2010:10:11 18:22:45-05:00, 2010:10:11 18:24:09-05:00, 2010:10:12 09:24:35-05:00, 2010:10:12 11:25:45-05:00, 2010:10:12 11:46:16-05:00, 2010:10:25 11:17:29-05:00, 2010:10:25 14:32:39-05:00, 2010:10:25 19:15:27-05:00, 2010:10:25 19:16:55-05:00, 2010:10:25 19:19:02-05:00, 2010:10:25 19:22:15-05:00, 2010:10:25 19:41:42-05:00, 2010:11:11 09:21:46-06:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Derived From Instance ID : xmp.iid:54DC5E0102C1DF11B091CDF61BDD9F5C Derived From Document ID : xmp.did:7AAF66DA58BFDF118A85B74283D7B523 Derived From Original Document ID: xmp.did:7AAF66DA58BFDF118A85B74283D7B523 Derived From Rendition Class : default Doc Change Count : 14760 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Layout : SinglePage Page Count : 27EXIF Metadata provided by EXIF.tools