LG SPK8 S User Manual Owner's S.DUSALLK SIM MFL70420306
SPK8-S Owner's Manual SPK8-S.DUSALLK_SIM_MFL70420306; Most comprehensive of product setup and usage. (English)
2018-02-01
User Manual: LG SPK8-S Owner's Manual Most comprehensive of product setup and usage. (English)
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
ENGLISH SIMPLE MANUAL Wireless Rear Speakers Kit Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. LG Customer Information Center 1-800-243-0000 1-888-865-3026 MODEL SPK8-S USA, Consumer USA, Commercial Register your product Online! www.lg.com Printed in China SPK8-S.DUSALLK_SIM_MFL70420306.indd 1-2 MFL70420306 www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved. 2018-01-09 9:20:03 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: yy Reorient or relocate the receiving antenna. yy Increase the separation between the equipment and the receiver. yy Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. yy Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. 1 Rear Speakers Connection Speaker design and connection method may be different according to models. FCC Radio Frequency Interference Requirements : High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter. Responsible Party : Surround Sound On/Off When you turn on surround function, you can enjoy magnificent surround sound for all the input sound source with rear speakers. The initial setting for the surround function is OFF, turn the surround function ON to use it. Transparent SK5Y Black stripe Surround On: Press and hold REAR o button on the remote control about 2 seconds. Rear speaker (Left) LG Electronics USA, Inc. 1000 Sylvan Ave Englewood Cliffs, NJ 07632 Tel: 1-800-243-0000 Surround Off: Press and hold REAR p button on the remote control about 2 seconds. Wireless Receiver Rear speaker (Right) Black stripe Transparent a Connect the speaker cables to rear speakers correctly. b Connect the Wireless Receiver and the rear speakers (Grey: right, Blue: left) with the speakers cables. c Turn on the Surround function to enjoy surround sound. SK10Y/SK9Y/SK8Y/SK6Y Surround On: Press and hold AUTO VOL button on the remote control about 2 seconds and then press AUTO VOL button repeateadly to select ON - SURROUND in the display window. Surround Off: Press and hold AUTO VOL button on the remote control about 2 seconds and then press AUTO VOL button repeateadly to select OFF - SURROUND in the display window. Additional Information Specification of Wireless receiver 2 Wireless Receiver Connection a Connect the power cord of the wireless receiver to the AC outlet. b Turn on the unit: The unit and wireless receiver will be automatically connected. The receiver's yellow - green LED turns on Wireless Receiver Connection Manually If the rear speakers do not make sound, try to connect manually. a Press PAIRING button on the rear of the wireless receiver. yy The yellow - green LED on the wireless receiver blinks quickly. Power requirement Refer to the main label on the wireless receiver. Power consumption Refer to the main label on the wireless receiver. Dimensions (W x H x D) Approx. 60.0 mm x 220.0 mm x 175.0 mm (2.4 inch x 8.7 inch x 6.9 inch) Design and specifications are subject to change without notice. About Ferrite Core (Optional) twice b Turn on the main unit. c Pairing is completed. yy The yellow - green LED on the wireless receiver turns on. SPK8-S.DUSALLK_SIM_MFL70420306.indd 3-4 2018-01-09 9:20:05
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2018:01:09 09:20:02+09:00 Metadata Date : 2018:01:09 09:20:05+09:00 Modify Date : 2018:01:09 09:20:05+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:70f2de35-d7e6-4bfd-bffd-fbf8b675c39d Original Document ID : xmp.did:DEB1765B50C9E4118190E53DAF7628D5 Document ID : xmp.id:48BBF9D5D2F4E7118EEBB12325070BDB Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:D467652BD2F4E7118EEBB12325070BDB Derived From Document ID : xmp.did:FD7684BA5CC3E71197AECA78E017FCF9 Derived From Original Document ID: xmp.did:DEB1765B50C9E4118190E53DAF7628D5 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2018:01:09 09:20:02+09:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools