LIDL US SBKO40C1 Bluetooth Headphone User Manual 2
Lidl US Trading, LLC Bluetooth Headphone 2
LIDL US >
Users manual
Turn on the device and go to the paring mode.
Open the Bluetooth software (such as BlueSoleil)
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
After a few second the “ device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“pairing” item,then select “connect with audio device” with
same operation.
Open your media player to play music, watch
TV/move and play game, then all the sound will be
playback on your device.
The device is convenient to connect to AC charger or a USB
charger with port marked with.Make sure that Micro USB
your device is full charged for at least 6 hours before initial
use. Insert one terminal of your charger to AC main or USB
port of PC and other terminal to . While charging,Micro USB
the red LED light constantly. When charging is completed,
the indicator LED turns red to blue.
Bluetooth Headphone
SBKO 4.0 C1 USER MANUAL
Table of contents
1 Introduction
2 Package content
3 Connection diagram
4 The way to change earhook
5 How to use
5.1 General functions
5.2 Pairing to mobile phone
5.3 Charging your device
6 Technology specification
7 After-sales service and support
8 FAQ
9 WARNING
1
1
1
2
2
2
4
5
7
6
6
1 2 3 456
1X Wireless Ear Buds C5
1X USB Charger cable
1X User Manual
3.Connection Diagram
You must select a qualified charger from a regular manufacturer.
You must charge the Ear Buds if it has been not used for more
than 12 months.
Please don't use the USB charger on any other phone jack device
Warning:
6.Technical specification
Turn on/Play /
pause/Turn off /
Answer call/
End call/
Reject call/
Transfer call voice
Last number redial
Next /Volume up
Factory reset
Previous/Volume down
MIC
8.FAQ
1\Why is there no power even when the Ear Buds is power
on?
Ans: Ensure the battery is being charged up to 6 hours for
first time using. The LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between your device with
phone or computer, if the connection is not
established, please reconnect again. Make sure the
Ear Buds is paired and connected with your
target phone or other master device.
3\How can I know the Ear Buds has been fully charged?
Ans: When the indicator LED turns red to blue when it is
charging, it has been fully charged.
4\why the Ear Buds cannot connect with second phone?
Ans: Please set the Ear Buds to multipoint mode.
Connect the Ear Buds to phone A,
Once again enter to pairing mode (phone one, will
disconnect), and connect the Ear Buds to phoneB.
and then use phone A paired device list to reconnect
to the Ear Buds .
7 8
C5 USER MANUALC5 USER MANUALC5 USER MANUALC5 USER MANUALC5 USER MANUALC5 USER MANUALC5 USER MANUAL
1.Introduction
Thank you for choosing the Stereo Ear Buds. This manual
will help you operate the Ear Buds, but you should first
familiarize yourself with the Bluetooth functionality of your
mobile phone or other devices before using the Ear Buds.
Safety Rules
1\ Please follow the rules depicted in this manual closely
to ensure your safety. Before using this Ear Buds, we
would strongly encourage you to read through this user
manual.
2\ Be more wary of any edges, uneven surfaces, metal
parts, accessories and its packaging so as to prevent
any possible injury or damage.
3\ Do not modify, repair or dismantle this Ear Buds.
Doing so may result in fires, electric shocks,
complete breakdown of this Ear Buds, etc. All
of which, are not covered under warranty.
4\ Do not use any diluents or volatile liquid to clean the
Ear Buds
5\ Do not use the Ear Buds in a hazardous location.
2.package content
Bluetooth Specification Bluetooth 4.1
Parameter Value
Charging Time
Dimension(L×W×H)
Playback Time
≥90dB
Signal-To-Noise
Distortion ≤3.0%
Bluetooth Profile HFP1.6/A2DP1.2/ AVRCP1.4/HSP1.2
RF Range
Frequency Response 180Hz-20KHz
Receiver Output 10mW
10 m
Weight
To use your Ear Buds , you must first pair your Ear Buds
with a phone or a computer. Once your Ear Buds is paired
to a specific mobile phone, they will remain paired and
automatically recognize each other whenever they
are within range.
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function
is activated
Turn on the Ear Buds go to the paring mode.
Search your Bluetooth devices on your phone by
following the phone's instructions. Refer to your phone's
user manual for more information.
After a few second the phone will list the device as a
discover device. Select it and follow your phone
instruction to select this pairing.
Then your phone will request a passkey or PIN, enter
0000 as your PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
your phone, then your can hear all the sound or music
form the device. Also you can control the player by
operating the device. Example, volume up and next music.
5.2.Pairing to Mobile phone or other device
5.3.Charging your device
7.After-sales service and support
If your device is not performing as it should,please take it to
your local service providers or dealer for service.
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your
computer, a Bluetooth adapter is necessary. Fix the
adapter with your computer and ensure its Bluetooth
function is activated.
USB
5.How to use
5.1. General Functions
Turn on
Enter the pairing
mode
Pairing
Desired Result Required Action
Press the “ ” button for 3 seconds when
the device is off. (Red LED slowly flashes
and a tone voice beeps)
When the device is off, Press the “ ” button
for 6 seconds.(Blue LED and Red LED
quickly flash alternately with two beep tone voice).
In pairing Mode use a Bluetooth function
mobile phone or other Bluetooth Master
Device and to perform pairing action
(detail refer to the chapter about pairing)
15.5g
661.4X24X29.5mm
About 5.5 Hours
About 80 min
4.The way to change earhook
1234
Desired Result Required Action
Transfer call voice
Answer call
End call
Reject call
Double Press the “ ” button to transfer
the call voice between the mobile phone
and device while on going call
Short Press the “ ” button while a call
coming
Short Press the “ ” button while on going
call
Press the “ ” button for 1~2 seconds
to reject call when the call is ringing
Charging Plug the charger to port of the device.
(Red LED is on)
Next /
Volume up
Short press the “+” button for music Next
Long press the “+” button for Volume up
Previous /
Volume down
Turn off
Press the “ ” button for 3 seconds when
the device is on.(A tone voice beep and all
LED is off)
Low battery
warning The Red LED flash
Battery power
indication
Battery status will be shown on the top right
corner of the phone screen after connected.
(Only support iphone, iPad)
Enable/Disable
Multipoint
Short press the “ ”button to enable Multipoint
at pairing modeDouble press the “ ” button to
disable the Multipoint at pairing mode
Short press the “-” button for music Previous
Long press the “-” button for Volume down
Play / pause
Short click “ ” to play when the device is
pausing and short click “ ” to pause when
the device is playing. Last number redial Double click“ ”button on connect state.
Desired Result Required Action
Factory reset Long press“+”button for 6 seconds at pairing
mode to clear the paired device list.
right
left
2
C5 USER MANUAL
SILVER CREST
FCC ID: 2AJ9O-SBKO40C1
8