LIDL US SFMT24A1 Wireless Mouse User Manual WM 791 FCC

Lidl US, LLC Wireless Mouse WM 791 FCC

Users Manual

1. The Nano Receiver is stored inside the mouse, in the battery compartment. To remove the receiver, open your battery compartment and remove the receiver as per step 1.2. Once you have finished using the mouse, remove the receiver from your USB port and replace within the mouse housing as per step 2. 12Remove the Receiver Store the ReceiverStoring the Nano ReceiverInstruction ManualRF2.4GHz Optical MousePlease read these instructions carefully before first use and retain them for future reference.Step 1. Open the back cover.Step 3. Replace back cover.Installing BatteriesThe RF2.4GHz optical mouse uses two AAA batteries .Installing Batteries:Step 2. Insert the batteries as showed below .Connecting the ReceiverUSB Port1. Connect the nano receiver ONLY to a USB port on your computer.Nano receiverDimension:L124X W71.7XH61.5MM2.4GHz wireless optical mouse with 6 keysErgonomic design，suitable for both handsResolution:800/1600/240ODPI switchingHigh precision optical engineSelf-storing nano Receiver,easy to take2 .4GHz RF transmission，up to 10mUSB interface plug&playCompatible with computers of various systems and brandsModel:SFMT 2.4 A1Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference,(2)this device must accept any interference received, including interference that may cause undesired operation.Model:SFMT 2.4 A1

Navigation menu