LIFI LABS TILE TILE User Manual LIFX Tile Manual Revised 12 22 indd

Download:
Mirror Download [FCC.gov]
Document ID	3719754
Application ID	GUYQk/8yQxPauM01aw76+w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	59.6kB (745015 bits)
Date Submitted	2018-01-19 00:00:00
Date Available	2018-01-22 00:00:00
Creation Date	2018-01-19 10:47:00
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-01-19 09:03:04
Document Title	LIFX_Tile_Manual_Revised-12-22.indd
Document Creator	Adobe InDesign CC 13.0 (Macintosh)

LIFX.COM
MEET YOUR NEW LIFX®
LIFX is color changing, Wi-Fi lighting that you
control with your smartphone or tablet.
With the LIFX app you can switch your lights on
and off, dim, adjust brightness and color, set
different scenes and wake up and sleep timers.
You can control individual lights, rooms, or the
entire house.
Even if you don’t have your smartphone with you,
LIFX still functions like a normal light by switching
on and off with a regular light switch.
ALL YOU NEED TO BEGIN IS...
• A device running iOS 9.0+ or Android 4.1+
• A Wi-Fi Internet connection. Wi-Fi access point
must be 802.11b, g or n compliant with WPA2 security
and a DHCP-configured connection available for every
connected LIFX® light.
• The LIFX app from your app store or at go.lifx.co
Simply complete the installation and setup steps on the next pages then follow the
app prompts to enjoy your new lights!
TILE KIT INCLUDES
5 x Tiles
4 x Connection cables
1 x Power and cable
INSTALL
CLEAN
CONNECT
Refer to 3M command
strip installation guideline
when installing your
Tiles. You can find this at
go.lifx.com
PEEL
SETUP
go.lifx.com
STICK
GET APP
SWITCH ON
CRE ATE
PUTTING UP YOUR TILES
Your Tiles can be applied to metal, glass, painted,
stained or varnished wood, tile, painted cinder block,
plaster, and painted wallboard. In all cases ensure that
the surface is a flat, clean, sealed and hard. Clean the
surface with isopropyl rubbing alcohol, gently wiping
and leave to dry. Do not use other cleaning substances.
To apply to the wall, remove the back command strip
liner, and push the product firmly on the wall for 30
seconds, putting pressure on each contact point.
See go.lifx.com for more information.
R E G U L AT O R Y & C O M P L I A N C E I N F O R M AT I O N
Specifications
To see a full list of LIFX® product specifications applicable to this Product, go to
www.lifx.com/compliance
Certification
LIFX® adheres to the certification requirements for various regions around the world.
To see a full list of LIFX® certifications please go to www.lifx.com/compliance to
ensure LIFX® complies with the certification requirements in your region.
FCC Compliance Statement U.S
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used under the instructions, may interfere with radio or television reception, which
can be determined by turning the equipment off and on. The user is encouraged
to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not approved by LIFX can void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. FCC ID: 2AA53 -TILE
EU Declaration of Conformity and Industry Canada
Compliance.
LIFX complies with all applicable EU Directives and Industry Canada Standards.
This Class B RFLD complies with the Canadian standard ICES-005. IC: 11475A-TILE.
See www.lifx.com/compliance
I C R E G U L AT O R Y S TAT E M E N T
This device complies with Part 15 of the FCC Rules and with
RSS-247 of Industry Canada. Operation is ubject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) T his device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l ’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
R F E X P O S U R E S TAT E M E N T
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux
ayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum
de 20 cm de distance entre la source de rayonnement et votre
corps.
C H A N G E S & M O D I F I C AT I O N
Changes or modifications made to this device may void certification of the
device. Changes or modifications made to this unit not expressly approved by
the party responsible for compliance could void the user‘s authority to operate
the equipment.
R E C O M M E N D E D I N S TA L L AT I O N R E Q U I R E M E N T S
This device should only be installed in light fittings and fixtures that are designed
to accept each fitting. Lamps, fittings and fixtures that are designed to accept
smaller or lower wattage light bulbs may result in the LIFX® bulb operating below
its optimal capacity. For optimal performance it is recommended that LIFX® bulbs
be fitted into fixtures that provide sufficient air flow through and around the bulb.
It is recommended that the LIFX® bulb be installed away from other devices
designed to receive or transmit radio signals. It is recommended LIFX® bulb/s
be installed and operated at a minimum distance of 30 cm from the body.
For lamps with a weight significantly higher than that of lamps for which they are
a replacement, attention should be drawn to the fact that the increased weight
may reduce the mechanical stability of certain luminaires and may impair contact
making and lamp retention.
INTERFERENCE
LIFX® has been designed to minimise interference with other radio, broadcast
or receiving devices. The manufacturer is not responsible for any interference
caused as a result of modifications to the product or by failure to adhere to the
recommendations in this document and at support.lifx.com. This device generates
radio frequency energy and, if not installed in accordance with the “recommended
installation requirements” may cause harmful interference to radio communication
devices. If the device is causing radio interference it is recommended that the
user try:
a) relocating the device to a different place;
b) adjust the antenna on the receiving device;
c) 	consult a technician experienced in radio interference.
NOTICES
•
•
•
•
 his device is not intended for use with emergency exits
Use in dry and damp locations only
Suitable for operation in ambient temperature not exceeding 35ºC
The light source of this luminaire is not replaceable; when the light source
•
•
•
reaches its end of life the whole luminaire shall be replaced.
Do not install Tile horizontally—affix to a vertical surface
Not suitable for application on window glass due to effect of sunlight on
adhesive.
Do not install over or near bedside.
LIFX® is not designed for use in:
•
•
•
 xcessively hot environments (e.g. close to ovens, radiators, heaters, etc.)
Regions or countries other than that in which the product was intended for
Outdoor and wet areas, except where the LIFX® Product specifies that it is for
both Indoor and Outdoor use
WHEN USING LIFX®
•
•
•
•
 witch off the power supply to the device and allow sufficient time for it to cool
before handling it
Do not open device, as this will void the warranty
Do not clean the device when it is powered on and or connected to the wall
socket
If cleaning the product, use a soft dry cloth, do not use cleaning agents
RF Warning Statement
To comply with FCC RF exposure compliance requirements,the antennas used for
this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
L I M I T E D WA R R A N T Y
GENERAL
Lifi Labs Inc. (“LIFX®“) warrants the LIFX® bulb (the “Product“), and only the
Product, against defects in materials and workmanship under normal use (“Defect”)
for a period of TWO YEARS (730 days) from the date of retail purchase by the
original purchaser (“Warranty Period“). Under this Limited Warranty, if a defect
arises and a valid claim is received by LIFX® within the Warranty Period, at its
option and to the extent permitted by law, LIFX® will either: 1. repair the Product
at no charge, using new or refurbished replacement parts --or-- 2. exchange the
Product with a new or refurbished Product.
In the event of a defect, to the extent permitted by law, these are your sole and
exclusive remedies. A replacement Product or part assumes the remaining warranty
of the original Product or ninety (90) days from the date of replacement or repair,
whichever is longer. When a Product or part of the Product is exchanged, any
replacement item becomes your property and the replaced item becomes LIFX®‘s
property. Parts provided by LIFX® in fulfilment of its warranty obligation must be
used in Products for which warranty service is claimed.
EXCLUSIONS & LIMITATIONS
This Limited Warranty applies only to the Product manufactured by or for LIFX® that
can be identified by the “LIFX® trademark, trade name, or logo affixed to it. The
Limited Warranty does not apply to any (a) LIFX® products and services other than
the Product, (b) non- LIFX® hardware product, (c) consumables (such as batteries),
or (d) software, even if packaged or sold with the Product or embedded in the
Product. Refer to the licenses accompanying the software for details of your rights
with respect to its use. LIFX® does not warrant that the operation of the Product
will meet your needs or requirements or be uninterrupted or error free. LIFX® is
not responsible for damage arising from failure to follow instructions relating to the
Product‘s use or from failures resulting from inadequate electrical supply or internet
access. This warranty does not apply to a Product or part of the Product that has
been altered or modified (e.g. to alter functionality or capability) by anyone who is
not a representative of LIFX® or if the Product is inserted or installed in a casing not
provided by LIFX®. In addition, this Limited Warranty does not apply to Defects or
damage caused by (a) use with non-LIFX® products; (b) accident, abuse, misuse,
flood, fire, earthquake or other external causes or abnormal conditions; (c) operating
the product outside the permitted or intended uses or conditions described by LIFX®
or with improper voltage or power supply; or (d) service (including upgrades and
expansions) performed by anyone who is not a representative of LIFX®. Recovery and
reinstallation of software programs and user data are not covered under this Limited
Warranty. This Limited Warranty does not cover the cost of returning the Product to
LIFX®; this is your responsibility. No LIFX® reseller, agent, or employee is authorized
to make any modification, extension, or addition to this Limited Warranty. If any term is
held to be illegal or unenforceable, the legality or enforceability of the remaining terms
shall not be affected or impaired.
EXCLUSIVE WARRANTIES
THE WARRANTIES SET FORTH HEREIN ARE THE EXCLUSIVE WARRANTIES
PROVIDED BY LIFX®, AND EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ALL OTHER WARRANTIES, WHETHER EXPRESS OR
IMPLIED WARRANTIES (INCLUDING WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT) ARE
HEREBY EXCLUDED.
LIMITATION OF DAMAGES
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, LIFX®
SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,
OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY USE OF
THE PRODUCT OR BREACH OF EXPRESS OR IMPLIED WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY. LIFX®’S LIABILITY
FOR DAMAGES RESULTING FROM ANY USE OF THE PRODUCT OR
BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION, OR
UNDER ANY OTHER LEGAL THEORY WILL BE LIMITED TO THE ORIGINAL
COST PAID FOR OF THE DEFECTIVE PRODUCT.
CONSUMER PROTECTION
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary by state to state.
GOVERNING LAW AND ARBITRATION
This Limited Warranty shall be governed by the laws of the State of California without
giving effect to any conflict of laws principles that may provide the application of the
law of another jurisdiction and without regard to the Convention on Contracts for
the International Sale of Goods. Any claim or dispute in connection with this Limited
Warranty shall be resolved in a cost effective manner through binding non appearance
based arbitration. The arbitration shall be initiated through an established alternative
dispute resolution provider mutually agreed upon by the parties. The alternative
dispute resolution provider and the parties must comply with the following rules: a)
the arbitration shall be conducted by telephone, online and/or be solely based on
written submissions, the specific manner shall be chosen by the party initiating the
arbitration; b) the arbitration shall not involve any personal appearance by the parties
or witnesses unless otherwise mutually agreed by the parties; and c) any judgement
on the award rendered by the arbitrator may be entered in any court of competent
jurisdiction. If the foregoing arbitration clause does not apply for any reason, you agree
to submit to the personal jurisdiction of the state courts located within San Francisco
County, California and the federal courts in the Northern District of California for the
purpose of litigating all such claims or disputes, which courts shall have exclusive
jurisdiction of such claims or disputes. Notwithstanding the foregoing, LIFX® may seek
injunctive or other equitable relief to protect its intellectual property rights in any court
of competent jurisdiction.
EQUIPMENT
This symbol on the product indicates that this product shall not be
treated as household waste. Instead it shall be sent to the applicable
collection point for the recycling of electronic equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and
human health. For more information about the recycling of this
product, please contact your local city office.
C H R O M AT I C I T Y C O - O R D I N AT E S O F C O L O R E D L I G H T
x < 0,270 or x > 0,530
y < – 2,3172 x 2 + 2,3653 x – 0,2199 or y > – 2,3172 x 2 +
2,3653 x – 0,1595
Frequency band: 2400-2483.5MHz
Maximum radio-frequency power transmitted: 20dBi
Modulation type : IEEE 802.11 b/g/n20
Not suitable for
use under dust
and moisture.
© 2017 LIFX (LIFI LABS INC.)
All rights reserved.
LIFI LABS INC. is the exclusive owner of rights and interests in
and to the mark LIFX, the LIFX logo and The light bulb reinvented.
Covered by patents: www.lifx.com/patents
HomeKit™
1.
4 . Open Apple Home App
2.
Open App Store
“A d d a c c e s s o r y ”
Use iOS 10.0
or later.
3.
5.
Get
Apple Home
App
Use HomeKit setup
code on in-box
instruc tion card.
Apple HomeKit technology provides an easy, secure way
to control your home’s lights, doors, thermostats, and
more from your iPhone®, iPad®, or iPod touch®.
To control this HomeKit-enabled accessory, iOS 10.0 or later is recommended.
Controlling this HomeKit-enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set
up as a home hub.
Use of the Works with Apple HomeKit logo means that an electronic accessory has
been designed to connect specifically to iPod touch, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Keep your user manual for the HomeKit setup code in the future.
Apple, iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the
U.S. and other countries. HomeKit is a trademark of Apple Inc.
HomeKit setup codes.
Each Tile has its own unique HomeKit setup
code so it can be used alone or in a group.
You will only need to scan the HomeKit setup
code for the Tile you plug directly to the
power source.
You can find your codes here and on the back
of each Tile.
1.
2.
3.
4.
5.
LIFX TILE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Create Date                     : 2018:01:19 10:47+11:00
Metadata Date                   : 2018:01:19 09:03:04+08:00
Modify Date                     : 2018:01:19 09:03:04+08:00
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:ef019fc7-8a2a-4367-98c9-6b83ba2fb2ab
Original Document ID            : xmp.did:8b78415e-2b2e-428a-ab00-3324ad35cd64
Document ID                     : xmp.id:f3f7356d-d913-4b33-9e6b-3e97c78d24d7
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:46a386d9-5fc4-4174-b0db-0017298acae8
Derived From Document ID        : xmp.did:46a386d9-5fc4-4174-b0db-0017298acae8
Derived From Original Document ID: xmp.did:8b78415e-2b2e-428a-ab00-3324ad35cd64
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:01:19 10:47+11:00
Format                          : application/pdf
Title                           : LIFX_Tile_Manual_Revised-12-22.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 32
Creator                         : Adobe InDesign CC 13.0 (Macintosh)

EXIF Metadata provided by EXIF.tools