LINEAR DMS SOLUTIONS SDN BHD LDMSB1 Bluetooth LE module connected to GPIO. User Manual Nodus EQP BGMS Module Datasheet 02 120117x
LINEAR DMS SOLUTIONS SDN BHD Bluetooth LE module connected to GPIO. Nodus EQP BGMS Module Datasheet 02 120117x
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3092817 |
| Application ID | ZkECePn6NW+QuYFeeFadUQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 183.32kB (2291474 bits) |
| Date Submitted | 2016-08-09 00:00:00 |
| Date Available | 2017-01-01 00:00:00 |
| Creation Date | 2016-01-14 12:01:06 |
| Producing Software | Mac OS X 10.10.5 Quartz PDFContext |
| Document Lastmod | 2016-05-12 21:51:58 |
| Document Title | @Nodus_EQP_BGMS_Module_Datasheet_02_120117.pptx |
| Document Creator | PowerPoint |
| Document Author: | J.M. Wang |
BGMS Bluetooth LE GPIO Module BGMS_P1 BGMS (BLE GPIO Master SMD) Product Specifica/ons and Design Guidelines Version 1.0 Make Your Product Smart and IoT Ready… Faster @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 1 of 10 General Descrip/on @Nodus-‐BGMS Module, is a state of art modular BLE PCBA. It is an equipment based member component of the @NodusNET Ecosystem. The BGMS Module is the End Device Node of an IoT Solu/on that performs applica/on specific tasks by providing a widely used consumer standard wireless connec/vity -‐ Bluetooth 4.1 Technology. @Nodus-‐BGMS Module aims to be integrated into any new or exis/ng electrical or electronics automa/on systems. Furthermore it provides users with immediate control, monitoring status, data transfer via direct wireless Bluetooth Smart connec/vity to our common daily used Smartphones, Tablet computers and Personal computers from both leading global opera/ng systems namely Apple’s iOS and Android. @Nodus-‐BGMS Module when u/lized as a group (more than 1 device), will form a MESH network that links all the ‘nodes’ together hence crea/ng an applica/ons rich network directly accessible by a Smartphone. Base Core Features • • • • • • • • • • • • • • Based on Qualcomm CSR μEnergy CSR1010 QFN Core Bluetooth Smart IC Bluetooth v4.1 specifica/on compliant 128KB memory: 64KB RAM and 64KB ROM 512KB EEPROM Applica/on firmware space Support for Bluetooth v4.1 specifica/on host stack including ATT, GATT, SMP, L2CAP, GAP RSSI monitoring for proximity applica/ons Low power hibernate: <900nA 16MHz and 32.76kHz clocking frequency 3x Configurable AIOs with 10-‐bit ADC resolu/on 11x Configurable DIOs 1x UART, 4x PWM Wake-‐up interrupt and watchdog /mer PCBA Dimensions: 21.8mm (L) x 20.0mm (W) x 3.0mm (T) PCB Material: FR4, Blue masking Weight: 1.3g Bluetooth LE Radio and Modem UART x 1 PIO x 11 PWM x 4 MCU AIO x 3 LDO 128K ROM Debug 64K RAM I2C BOTTOM VIEW Advanced Embedded Applica/ons USER/BASEBAND INTERFACE • TOP VIEW 512K EEPROM 16MHz, 32kHz Clocks @Nodus-‐BGMS @Nodus-‐BGMS can be op9onally pre-‐loaded with LDMS’ proprietary base applica/on firmware that is compa/ble with the @NodusNET MESH network, which carries built-‐in intelligence required to perform an IoT End Device or Node’s role extensively covering Smart Sensors, Switches, Ligh/ng, Air-‐ condi/oners, Fans of a poten/al ‘Connected’ Smart Home and Smart Buildings. • Automa@on Control • Up to 3-‐Channels of Digital ON/OFF • Dimming control: PWM • Read back status • Built-‐in Real Time Clock with Calendar Func@ons • 5x Timer/Scheduler User Configurable Profiles • Time, Day(s) of Week, On Dura/on • Day or Night Mode or 24Hrs Opera/ons • Built-‐in Opera@ons Modes • Auto-‐OFF mode • Random ON&OFF mode • Pre-‐stored user modes • Usage data for Post Sta@s@cal analy@cs • Node Power consump/on • Customized Serial Communica@ons (MCU to MCU) • High efficiency UART • Commands, Sejngs, automa/on equipment diagnos/c data and general data transfer • Customiza/on op/ons to Client’s Proprietary Protocol • Wireless Networking and Connec@vity • BLE MESH Bridge connec/on to leading smartphones, tablets and personal compu/ng devices • Network Security ID • Simple Pairing & Unpairing Process • Mobile Applica@ons (APP) Support • Compa/ble to @Nodus-‐APP available on Apple’s iOS and Android plakorms • Mul/ple smartphones control and monitoring • Firmware Over-‐the-‐Air Update Fig. 1 Func/onal Block Diagram of @Nodus-‐BGMS Module @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 2 of 10 Mechanical Dimensions @Nodus-‐BGMS Module uses TOP, BOTTOM pads and SIDE LCC Pads to external interfaces for programming, debug, serial communica/ons (UART) and user Analog or Digital I/O interfaces. All pads are designed to have 1.27mm PITCH TOP VIEW BOTTOM VIEW SIDE VIEW 21.80mm 20.00mm S10 S01 S06 T10 T01 S05 2.80mm B10 16.00mm 2.30mm 2.09mm 1.58mm 1.70mm Pin Layout Configura/ons B01 NOTE: 1. 1.27mm PITCH (distance between 2 adjacent pads’ center point) 2. Max height of 3.20mm (tallest component and op9onal RF Shield case) 1.00mm (PCB Thickness) @Nodus-‐BGMS Module can be integrated: Ver/cal Assembly which uses TOP and BOTTOM Pads or SMD laid Assembly which uses BOTTOM Pads and SIDE LCC TOP Pad Name BOTTOM Pad Name SIDE LCC Name T01 VSS B01 NC S01 VBAT T02 VSS B02 AIO2 S02 VBAT T03 PIO0 / UART-‐Tx B03 AIO1 S03 PIO8 / MISO T04 PIO1 / UART-‐Rx B04 AIO0 S04 VSS T05 PIO5 / CLK B05 PIO3 S05 VSS T06 PIO6 / CS B06 PIO4 S06 PIO7 /MOSI T07 PIO7 / MOSI B07 PIO9 S07 PIO6 / CS T08 PIO8 / MISO B08 PIO10 S08 PIO5 / CLK T09 SPI_PIO B09 PIO11 S09 PIO1 / UART-‐Rx T10 VBAT B10 VSS S10 PIO0 / UART-‐Tx Table 1.0: Pin out defini/ons of the @Nodus-‐BGMS Module @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 3 of 10 Moun/ng Op/ons @Nodus-‐BGMS Module has 2 assembly moun/ng onto Client’s baseband or motherboard for different applica/ons: a. Ver/cal 900 Slot-‐In Standing Moun/ng b. Flat SMD Lay-‐down Moun/ng Fig. 3a: Ver/cal 900 Slot-‐In Standing Moun/ng Fig. 3b: Flat SMD Lay-‐down Moun/ng 1.60mm Baseband PCB Thickness 2.09mm 1.27mm 0.90mm 0.37mm Pitch Pad Width Pads Gap 0.85mm 0.55mm 0.70mm 1.20mm 0.80mm 1.25mm 1.58mm 16.00mm 1.70mm 2.30mm Fig. 3c: Dimensions of BGMS’ TOP and BOTTOM pads when applying Slot-‐In Moun/ng Fig. 3d: Dimension of SIDE LCC half-‐holes and recommended user client moun/ng pads 0.90mm 1.50mm 0.85mm 1.00mm 0.20mm 2.30mm 1.00mm Fig. 3e: Recommended user moun/ng pads to mate with BGMS’ TOP and BOTTOM LGA Slot-‐In moun/ng type of Client baseband or motherboard Fig. 3f: Dimension of BGMS BOTTOM LGA pads and recommended user client moun/ng pads @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 4 of 10 Electrical Characteris/cs Absolute Maximum Ra/ngs Ra@ng Min Max Unit Storage temperature -‐40 85 oC Banery (VDD_BAT) opera/on 1.8 3.6 I/O supply voltage -‐0.4 3.6 Vss-‐0.4 Vdd+0.4 Other terminal voltage Recommended Opera/ons Condi/ons Opera@ng Condi@on Min Typical Max Unit Opera/ng temperature range -‐30 25 85 oC Banery (VDD_BAT) opera/on 2.7 -‐ 3.6 I/O supply voltage 1.2 -‐ 3.6 Current Consump/on Power Consump@on (VBAT = 3.0V, T=25oC) Typical Unit 900 nA uA BGMS – Peak (Tx/Rx) Mode ~18 mA BGMS – Ac/ve CSRMesh Mode ~30 mA BGMS – Dormant Mode (All OFF, Wake-‐up Trigger) BGMS – Sleep Mode @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 5 of 10 Cer/fica/ons Cer@fica@on Test/Approval Laboratory Federal Communica/ons Commission. FCC Part 15(b) Cer@ficate ID FCC ID:2AIACLDMSB1 CE: R&TTE TBA Qualifica/ons Qualifica@on Qualifica@on Body Qualifica@on ID Bluetooth SIG Qualifica/on Declara/on ID (BQB) Bluetooth SIG Org www.bluetooth.org D029702 IEEE Org www.ieee.org OUI Assigned Test Laboratory Status RoHS Rictek Laboratory www.rictek.com.cn Declared Compliant REACH Rictek Laboratory www.rictek.com.cn Declared Compliant IEEE Registra/on for MA-‐L Assignment Declara/ons Qualifica@on @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 6 of 10 Manufacturing Guides Demonstrated below based on the recommended SMD reflow temperature profile when choosing the Flat SMD Lay-‐ down Moun/ng Op/on. SMD Reflow Process Recommenda/ons @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 7 of 10 Ordering Informa/on Part Numbering – Device Hardware Descrip@on Order Code @Nodus BGMS Module V1_0 PCB Assembly @NODUS-‐EQP-‐PCBA-‐BGMS-‐V01 Part Numbering – Device Firmware Applica@ons (Op9onal) Descrip@on Order Code @Nodus BGMS FW Kernel (BootloaderV1_1, @NodusNET Protocol2_3) base firmware custom opera/ng system for client subscrip/on and customiza/on @NODUS-‐FWK-‐BGMS-‐V11_23 Unit Labeling Customer ID or CC TT NNnnnn Device Type ID block NN:nnnn a1 53 02 0001 Shipping Package 24mm 270mm 24mm @Nodus-‐BGMS Modules are shipped in transparent plas/c tray of maximum 100units in a 10 by 10 configura/on in a tray mechanical dimensions of 270mm (L) x 270mm (W) x 4mm (H) 270mm @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 8 of 10 Document Revision History Date Version Dec 2015 1.0 Jan 2016 1.1 Related Pages Descrip@on First Ini/al Release Added IEEE MA-‐L Assignment Lis/ng, Bluetooth SIG Declara/on Lis/ng, REACH and RoHS compliant declara/on Document References Reference Bluetooth SIG Bluetooth 4.x Specifica/ons Qualcomm CSR1010 QFN Data Sheet URL hnps://www.bluetooth.com/what-‐is-‐ bluetooth-‐technology/bluetooth-‐ technology-‐basics/low-‐energy hnps://www.csrsupport.com/download/ 39359/CSR1010%20Data%20Sheet %20CS-‐231985-‐DS.pdf @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 9 of 10 Important No/ces Warning, Personal Injury Do not use this product as safety or emergency stop devices or in any other applica/on where failure of the product could result in personal injury. Do not use this product for applica/ons other than its intended and authorized use. Before installing, handling, using or servicing this product, please refer to Linear DMS Solu@ons (LDMS). Failure to comply with these instruc/ons could result in death or serious injury. If the Buyer shall purchase or use LDMS products for any unintended or unauthorized applica/on, Buyer shall defend, indemnify and hold harmless LDMS and its officers, employees, subsidiaries, affiliates and distributors against all claims, costs, damages and expenses, and reasonable anorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if LDMS shall be allegedly negligent with respect to the design or the manufacture of the product. ESD Precau@ons The inherent design of this component causes it to be sensi/ve to electrosta/c discharge (ESD). To prevent ESD-‐induced damage and/or degrada/on, take customary and statutory ESD precau/ons when handling this product. Warranty LDMS warrants solely to the original purchaser of this product for a standard period of 12 months (one year) from the date of delivery that this product shall be of the quality, material and workmanship defined in LDMS’ published specifica/ons of the product. Within such period, if proven to be defec/ve, LDMS shall repair and/or replace this product, in LDMS’s discre/on, free of charge to the Buyer, provided that: • no/ce in wri/ng describing the defects shall be given to LDMS within fourteen (14) days axer their appearance; Headquarters and Subsidiaries • such defects shall be found, to LDMS’s reasonable sa/sfac/on, to have arisen from LDMS’s faulty design, material, or workmanship; • the defec/ve product shall be returned to LDMS’s factory at the Buyer’s expense; and • the warranty period for any repaired or replaced product shall be limited to the unexpired por/on of the original period. This warranty does not apply to any equipment which has not been installed and used within the specifica/ons recommended by LDMS for the intended and proper use of the equipment. EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH HEREIN, LDMS MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT. ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND DECLINED. LDMS is only liable for defects of this product arising under the condi/ons of opera/on provided for in the data sheet and proper use of the goods. LDMS explicitly disclaims all warran/es, express or implied, for any period during which the goods are operated or stored not in accordance with the technical specifica/ons. LDMS does not assume any liability arising out of any applica/on or use of any product or circuit and specifically disclaims any and all liability, including without limita/on consequen/al or incidental damages. All opera/ng parameters, including without limita/on recommended parameters, must be validated for each customer’s applica/ons by customer’s technical experts. Recommended parameters can and do vary in different applica/ons. LDMS reserves the right, without further no/ce, (i) to change the product specifica/ons and/or the informa/on in this document and (ii) to improve reliability, func/ons and design of this product. Copyright© 2016, Linear DMS Solu/ons Sdn. Bhd. (LDMS) All rights reserved Contact Informa/on Linear DMS Solu/ons Sdn. Bhd. (1058898-‐W) 135, Jalan Utara, Bukit Gelugor, 11700 PENANG, Malaysia Tel: +60-‐4-‐6607 666 Fax: +60-‐4-‐6607 667 Email: info@lineardms.com.my URL: www.lineardms.com.my @Nodus-‐BGMS Product Specifica/ons ©2016 All Rights Reserved www.lineardms.com.my Page 10 of 10 DECLARATION OF CONFORMITY Hereby， LINEAR DMS SOLUTIONS SDN BHD declares that this BGMS Bluetooth LE GPIO Module product in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found an Website: www.lineardms.com.my CE Logo: ETSI EN 300 328 V1.8.1 (2012-06) ETSI EN 301 489-1 V1.9.2(2011-09) ETSI EN 301 489-17 V2.2.1(2012-09) EN 62479:2010 EN 60950-1: 2006+ A11: 2009+ A1: 2010+ A12:2011+ A2: 2013 (Title(s) of regulations, standards, etc.) All essential radio test suites have been carried out. 1. The EUT maximum working temperature -30°C and 85°C FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: 2AIACLDMSB1 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2016:01:14 12:01:06Z Creator Tool : PowerPoint Modify Date : 2016:05:12 21:51:58+08:00 Metadata Date : 2016:05:12 21:51:58+08:00 Format : application/pdf Description : Creator : J.M. Wang Title : @Nodus_EQP_BGMS_Module_Datasheet_02_120117.pptx Keywords : Producer : Mac OS X 10.10.5 Quartz PDFContext Document ID : uuid:cd8483c7-01f9-4193-a039-d8ae77cf3ebe Instance ID : uuid:6c974bdc-9e4f-4d36-a564-8572539cfe65 Page Count : 12 Subject : Author : J.M. Wang Apple Keywords :EXIF Metadata provided by EXIF.tools