LINKSYS BEFCMU10V3 CABLE MODEM User Manual

LINKSYS LLC CABLE MODEM LINKSYS Cable Modem rev03

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

MANUAL

LINKSYS BEFCMU10 ver. 3 User Manual 2 LINKSYS BEFCMU10 ver. 3 Cable Modem User’s Manual
LINKSYS BEFCMU10 ver. 3 User Manual Safety Notes For Installation  Use only the type of power source indicated on the marking labels.  Use only the power adapter supplied with the product.  Do not overload wall outlet or extension cords as this may increase the risk of electric shock or file. If the power cord is frayed, replace it with a new one.  Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, which are intended for ventilation and proper operation. It is recommended to mount the product with a stack.  Do not place the product near any source of heat or expose it to direct sunshine.  Do not expose the product to moisture. Never spill any liquid on the product.  Do not attempt to connect with any computer accessory or electronic product without instructions from qualified service personnel. This may result in risk of electronic shock or file.  Do not place this product on an unstable stand or table. For Using  Power off and unplug this product from the wall outlet when it is not in use or before cleaning. Pay attention to the temperature of the power adapter. The temperature might be high.  After powering off the product, power on the product at least 15 seconds later.  Do not block the ventilating openings of this product.  When the product is expected to be not in use for a period of time, unplug the power cord of the product to prevent it from the damage of storm or sudden increases in rating. For Service Do not attempt to disassemble or open covers of this unit by yourself. Nor should you attempt to service the product yourself, which may void the user’s authority to operate it. Contact qualified service personnel under the following conditions:  If the power cord or plug is damaged or frayed.  If liquid has been spilled into the product.  If the product has been exposed to rain or water.  If the product does not operate normally when the operating instructions are followed.  If the product has been dropped or the cabinet has been damaged.  If the product exhibits a distinct change in performance. Warning  This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution  Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
Download:
Mirror Download [FCC.gov]
Document ID338431
Application IDRvLNDZviWZkPu+pLivc+ZQ==
Document DescriptionMANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize139.11kB (1738908 bits)
Date Submitted2003-07-09 00:00:00
Date Available2003-07-09 00:00:00
Creation Date2003-07-09 09:42:09
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-07-09 17:45:41
Document TitleMicrosoft Word - LINKSYS Cable Modem_rev03
Document CreatorPScript5.dll Version 5.2
Document Author: ellie
FCC ID Filing: Q87-BEFCMU10V3

Navigation menu