LINKSYS BEFCMU10V3 CABLE MODEM User Manual LINKSYS Cable Modem rev03
LINKSYS LLC CABLE MODEM LINKSYS Cable Modem rev03
LINKSYS >
MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 338431 |
| Application ID | RvLNDZviWZkPu+pLivc+ZQ== |
| Document Description | MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 139.11kB (1738908 bits) |
| Date Submitted | 2003-07-09 00:00:00 |
| Date Available | 2003-07-09 00:00:00 |
| Creation Date | 2003-07-09 09:42:09 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-07-09 17:45:41 |
| Document Title | Microsoft Word - LINKSYS Cable Modem_rev03 |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | ellie |
LINKSYS BEFCMU10 ver. 3 User Manual LINKSYS BEFCMU10 ver. 3 Cable Modem User’s Manual LINKSYS BEFCMU10 ver. 3 User Manual Safety Notes For Installation Use only the type of power source indicated on the marking labels. Use only the power adapter supplied with the product. Do not overload wall outlet or extension cords as this may increase the risk of electric shock or file. If the power cord is frayed, replace it with a new one. Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, which are intended for ventilation and proper operation. It is recommended to mount the product with a stack. Do not place the product near any source of heat or expose it to direct sunshine. Do not expose the product to moisture. Never spill any liquid on the product. Do not attempt to connect with any computer accessory or electronic product without instructions from qualified service personnel. This may result in risk of electronic shock or file. Do not place this product on an unstable stand or table. For Using Power off and unplug this product from the wall outlet when it is not in use or before cleaning. Pay attention to the temperature of the power adapter. The temperature might be high. After powering off the product, power on the product at least 15 seconds later. Do not block the ventilating openings of this product. When the product is expected to be not in use for a period of time, unplug the power cord of the product to prevent it from the damage of storm or sudden increases in rating. For Service Do not attempt to disassemble or open covers of this unit by yourself. Nor should you attempt to service the product yourself, which may void the user’s authority to operate it. Contact qualified service personnel under the following conditions: If the power cord or plug is damaged or frayed. If liquid has been spilled into the product. If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance. Warning This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. LINKSYS BEFCMU10 ver. 3 User Manual NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. LINKSYS BEFCMU10 ver. 3 User Manual Chapter 1: Overview 1.1 Physical Outlook 1.1-1 Front Panel The following illustration shows the front panel of the LINKSYS BEFCMU10 VER. 3 Cable Modem. LED Indicators The LEDs on the front panel are described in the table below (from left to right): LED Color POWER Green Cable Green Activity Green Ethernet USB Green Green Status Description Off Power off. On Power on. Off Power off or the initial test is over. Blinking To indicate cable modem is on line. Off Power off or the initial test is over. Blinking To indicate transmit RF US traffic. Off Power off or the initial test is over. Blinking To indicate Ethernet data traffic. On Ethernet line is in use. Off Power off or the initial test is over. Blinking On To indicate USB data traffic. USB interface is in use. 1.1-2 Rear Panel 12 VDC: RESET︰ 12V Power connector Reset-to-Default push button LAN︰ 10/100BaseTX RJ-45 connectors USB： USB Connector LINKSYS BEFCMU10 ver. 3 User Manual CABLE︰ F-Connector LINKSYS BEFCMU10 ver. 3 User Manual Chapter 2: Installation 2.1 Connecting the Cable Modem to Your Computer 2.1-1 Installation Procedure for Ethernet Interface Follow the steps below for proper installation: 1. Make sure your computer meets the system requirements. 2. Connect a coaxial cable (supplied by the local Cable Television Company) to the CABLE connector on the modem. 3. Plug the power adapter into the POWER connector of the modem. 4. Plug the other end of the power adapter into a power outlet. 5. Check CABLE LED. If it is solid ON, the Cable Modem is on-line now. If it is not, contact your service provider. 5. Connect the RJ-45 Ethernet cable to one of the ETHERNET connector on the modem, connect the other end with the 10/100BaseT Ethernet port on your computer. 6. When the connection is established, the client PCs can access the Internet or remote network through the LINKSYS BEFCMU10 ver. 3. Note: You can go to Chapter 3.3 “Setting TCP/IP on client PC” now Below shows the connection status among the cable modem and your computer. LINKSYS BEFCMU10 ver. 3 User Manual 2.1-2 Installation Procedure for USB Interface 1. 2. 3. 4. Follow the steps below for proper installation: Make sure your computer meets the system requirements. Connect a coaxial cable (supplied by the local Cable Television Company) to the CABLE connector on the modem. Plug the power adapter into the POWER connector of the modem. Plug the other end of the power adapter into a power outlet. 5. Check CABLE LED. If it is solid ON, the Cable Modem is on-line now. If it is not, contact your service provider. 6. Connect the USB cable to the USB connector on the modem. Note: You can go to Chapter 3.1 “USB Driver installation” now 7. When the connection is established, the client PCs can access the Internet or remote network through the LINKSYS BEFCMU10 ver. 3. Note: You can go to Chapter 3.3 “Setting TCP/IP on client PC” now Below shows the connection status among the cable modem and your computer. LINKSYS BEFCMU10 ver. 3 User Manual Chapter 3: Software Installation and Configuration 3.1 USB Driver Installation 3.1-1 For Windows 98/Me 1. Wait for the cable modem is running in the operational state (registration O.K.). Plug the USB cable into your PC USB port. You will see the next page. Click the “Next” button. 2. Select “Search for the best drivers for your device“ and click the “Next” button. 3. Check “Specify a location” and browse CD-ROM:\Win9x or WinME. Click the “Next” button. LINKSYS BEFCMU10 ver. 3 User Manual 4. Select “The updated driver...” and click the “Next” button. 5. Click the “Next” button. 6. Installation has been completed here. Click the “Finish” button. LINKSYS BEFCMU10 ver. 3 User Manual 7. The system will ask you to restart your computer. Click “Yes” to complete the installation. 3.1-2 For Windows 2000/XP 1. Wait for the cable modem is running in the operational state (registration O.K.). Plug the USB cable into your PC USB port. 2. You will see the next page. Click the “Next” button. 3. LINKSYS BEFCMU10 ver. 3 User Manual Select “Search for a suitable driver for my device“ and click the “Next” button. 4. Insert the driver CD into CD-ROM. Select “CD-ROM drive” and clicks the “Next” button. 5. Click the “Next” button. 6. LINKSYS BEFCMU10 ver. 3 User Manual Installation has been completed here. Click the “Finish” button. 3.2 Uninstall USB Driver 3.2-1 For Windows 98/ME 1. Click “Start” button on your computer’s taskbar, point to “Settings”, and then click “Control Panel”. 2. 3. Select Add/Remove Programs. On the Install/Uninstall tab, select USB Cable Modem Adapter from the list box. Click the Add/Remove button. A confirmation dialog appears. Click Yes. A dialog box appears to ask you unplug USB cable, please unplug the cable and click OK. 4. 5. 3.2-2 For Windows 2000/XP Click on the Start menu, point to Settings and click on Control Panel. Select Add/Remove Programs. Select USB Cable Modem Adapter from the list box. Click the Change/Remove button. Click Yes button. A dialog box appears to ask you unplug USB cable, please unplug the cable and click OK. LINKSYS BEFCMU10 ver. 3 User Manual 3.3 Setting TCP/IP on Client PC After you successfully complete the network interface card (Ethernet card) installation task, you need to make sure the TCP/IP communications protocol used by the Ethernet card is installed and correctly configured on your system. 3.3-1 For Windows 98/Me 1. Click on the Start menu, point to Settings and click on Control Panel. 2. The Control Panel window will show up. Double-click the “Network” icon in the Control Panel window. 3. Windows will appear the Network dialog box. Click “Configuration” tab to bring it to the front, and on this tab, a list of installed network components appears. Option 1: If you have no TCP/IP protocol, click Add. Option 2: If you have TCP/IP protocol, go to Step 7. LINKSYS BEFCMU10 ver. 3 User Manual 4. The Select Network Component Type dialog box will show up. Click ”Protocol”, and then click ”Add”. 5. You will see the Select Network Protocol dialog box. Click “Microsoft” in the “Manufactures:” list, and then click “TCP/IP” in the “Network Protocols:” list. Click “OK”. LINKSYS BEFCMU10 ver. 3 User Manual 6. 7. You will be directed back to the Network dialog box, and on the “Configuration” tab, the entry that includes TCP/IP -> followed by the Ethernet card installed in your computer will appear in the list of installed network components. Click TCP/IP -> followed by the Ethernet card installed in your computer, and then click ”Properties”. The TCP/IP Properties dialog box will appear. 8. 9. LINKSYS BEFCMU10 ver. 3 User Manual In the TCP/IP Properties dialog box, please follow the directions below: Click “IP Address” tab to bring it to the front, and then click “Obtain an IP address automatically” on the tab. Click “Gateway” to bring it to the front. On this tab, leave the “New gateway:” blank. If there is the entry in the “Installed gateway:” list, click it and then click “Remove” to remove all installed gateways. 10. Click “DNS Configuration” tabs to bring it to the front, and click “Disable DNS”, then click “OK” to close the dialog box. LINKSYS BEFCMU10 ver. 3 User Manual 11. The Copying Files dialog box will pop up and the system will start copying files from Windows. At the first time you will be asked to insert the Windows 98 CD-ROM into the CD-ROM drive during the files copying, and follow the instructions when they show up, then click “OK”. It will prompt another Copying Files dialog box. Please type the command line that Windows files located in the dialog box (For example, D:\win98). Click “OK” to continue the files copying. 12. Windows will appear the System Settings Change dialog box and ask you if you would like to restart your computer. Click “Yes”. LINKSYS BEFCMU10 ver. 3 User Manual 3.3-2 For Windows 2000/XP 1. Click “Start” button on your computer’s taskbar, point to “Settings”, and then click ”Network and Dial-up Connections”. 2. The Network and Dial-up Connections window will show up. Double-click “Local Area Connection” icon in the Network and Dial-up Connections window. 3. The Local Area Connection status window will show up. Click the “Properties” button. LINKSYS BEFCMU10 ver. 3 User Manual 4. Click “Internet Protocol (TCP/IP)” and then click “Properties”. 5. The Internet Protocol (TCP/IP) Properties dialog box appears. Click “Obtain an IP address automatically”. Click “Obtain DNS server address automatically”. Click “OK” to close the dialog box. LINKSYS BEFCMU10 ver. 3 User Manual 6. Windows will appear the System Settings Change dialog box and ask you if you would like to restart your computer. Click “Yes”. 3.4 DHCP Server PC connected to the cable modem can automatically get a private IP address from the DHCP server of cable modem before cable modem is on line. The following steps will show you how to get an IP address from DHCP server of cable modem before cable modem is on line. 3.4-1 For Windows 98/Me 1. Click “Start“, point to “Run“, and click to open the “Run“ windows. LINKSYS BEFCMU10 ver. 3 User Manual 2. Enter “winipcfg“ in the “Open“ field. Click “OK“ to execute the winipcfg and show the “IP Configuration“ window. 3. Select the “Ethernet adapter“ to show the IP address. Press “Release“ and “Renew“ if the PC is not accessing the Internet. After the cable modem is on line, you need to press the “Release“ and “Renew“ to get a new IP address from your ISP’s server. 3.4-2 For Windows NT/2000/XP 1. Click “Start“, point to “Run“, and click to open the “Run“ windows. LINKSYS BEFCMU10 ver. 3 User Manual 2. The Run dialog box appears. Type “cmd” in the “Open” field, and then click “OK” to execute the command. 3. You will enter the dos mode, type “ipconfig”, press “Enter” on your keyboard, and you will see the IP address your computer get from the cable modem. 4. If PC is not access Internet, type “ipconfig /release”, and press “Enter” on your keyboard to release the IP. LINKSYS BEFCMU10 ver. 3 User Manual 5. Type “ipconfig /renew”, and press “Enter” on your keyboard to renew the IP. You can repeat the steps until your computer gets the correct IP. 3.4-3 For Apple Macintosh 1. Click “Apple menu“, point to “Control Panels“, and click “TCP/IP” to open the “TCP/IP” window. LINKSYS BEFCMU10 ver. 3 User Manual 2. If the iMac gets an invalid IP, select “Using DHCP Server” in “Configure” field. Click the “Close box” at the upper left corner to close the “TCP/IP” window. 3. Click the “Save” in the prompted message box. 4. You need to wait about 2 minutes and open “TCP/IP” window to see the new TCP/IP status. 3.5 Renew PC IP Address There is a chance that your PC does not renew its IP address after cable modem is on line and the PC cannot access the Internet. Please follow the procedures below to renew PC’s IP address after the cable modem is on line. 1. LINKSYS BEFCMU10 ver. 3 User Manual Click “Start“, point to “Run“, and click to open the “Run“ windows. 2. Enter winipcfg in the “Open“ field. Click “OK“ to execute the winipcfg and show the “IP Configuration“ window. 3. Select the “Ethernet adapter“ to show the IP address. Press “Release“ and “Renew“ to get a new IP address from your ISP’s server. 4. Select the “OK“ to close the IP Configuration window. LINKSYS BEFCMU10 ver. 3 User Manual Chapter 4: Access Internet through Cable Modem For making sure that you can get into Internet successfully, please make sure the following first. 1. Make sure the connection (through Ethernet or USB) between the cable modem and your computer is OK. 2. Make sure the TCP/IP protocol is set properly. 3. Subscribe to Cable Television Company and. Accessing Internet When you are sure all above is Ok, you can open the Browser (such as I.E.) to open the homepage for the browser. See the following example. LINKSYS BEFCMU10 ver. 3 User Manual Chapter 5: Web Manager Once your host PC is properly configured, please proceed as follows: Start your web browser and type the private IP address of the cable modem in the URL field: 192.168.100.1. Type the IP address as the figure shown below. After connecting to the device, you will be prompted to enter username and password. By default, the username is empty and the password is empty. See the following example for running under Windows XP. 5.1 Status 5.1-1 Hardware This page shows the basic information of your cable modem such as name of your modem, serial number, MAC address, hardware version, software version, receive power level, transmit power level, cable modem status and so on. LINKSYS BEFCMU10 ver. 3 User Manual 5.1-2 Connection The page shows the connection information about the Downstream and Upstream Channel LINKSYS BEFCMU10 ver. 3 User Manual 5.1-3 Local Network This page shows the Connected Devices with their Mac and IP addresses. LINKSYS BEFCMU10 ver. 3 User Manual Chapter 6: Troubleshooting If the suggested solutions in this section do not resolve your issue, contact your system administrator or Internet service provider. Can I use the same cable line for TV and cable modem? A. Yes, the TV and cable modem uses the cable line. You need a splitter to use them at the same time. Ask Cable Company to install the splitter for you to avoid signal degradation. My cable modem cannot get a solid green light on the Status LED when I connect the cable back. A. The cable modem lost the signal during the disconnection period and it will keeps scanning other available signal. When you connect the cable back, it might take a while to find the correct channel. You can power cycle the modem to speedup the process since modem will remember the channel last time and it will start from that channel at startup. How do I see my IP address? A. If you are using Windows 95/98/Me, the winipcfg command will show you to IP address of the PC connected to the cable modem. Notice that even though you seem get the same address all the time, it may still be a dynamic address. LINKSYS BEFCMU10 ver. 3 User Manual Appendix: Specification Product Overview LINKSYS BEFCMU10 ver. 3 is a DOCSIS 2.0-base cable modem that provides high-speed connectivity to residential, commercial, and education subscribers on public and private networks via an existing cable infrastructure. BEFCMU10 ver. 3 uses the advanced PHY (A-TDMA/S-CDMA) technologies to support higher bandwidth in the upstream. BEFCMU10 ver. 3 can inter-operate with any DOCSIS compliant headend equipment. The IP traffic can transfer between BEFCMU10 ver. 3 and DOCSIS compliant headend equipment. The data security secures upstream and downstream communications. Features General CableLabs DOCSIS 1.0/1.1/2.0 Standard Compliant • F-Connector for the cable interface • Standard RJ-45 connector for 10/100BaseT Ethernet with auto-negotiation function and auto-media dependent interface crossover (MDIX) • USB Connector for USB (12Mbps) interface • Clear LED Display • Plug and Play • Up to 42.88 Mbps downstream and up to 30.72 Mbps upstream • Frequency agility • Transparent bridging for IP traffic • Transparent bridging between CPE and RF interface • Transparent bridging between Ethernet and USB interface • Packet Filtering Up to 32 CPE MAC filters, 32 LLC filters, 32 IP filters • • • Multiple users supported (32 CPEs supported) Security with X.509 Authentication / RSA protected Key Exchange / 56 bits DES Data Encryption Interoperable with any DOCSIS compatible LINKSYS BEFCMU10 ver. 3 User Manual headend equipment Management & Maintenance • Support Web pages and private DHCP server for status monitoring • SNMP v1/v2c/v3 Management • Remote secured operating firmware downloading • Reset To Default Settings by RESET Push Button • Syslog (Remote) • Event Log (Local) Specifications Cable RF: Downstream Upstream Operating Frequency Range 88-860MHz 5-42MHz Frequency Channel HRC, IRC, STD Frequency Selection Auto Scanning Controlled by Headend Bandwidth 6MHz Programmable (200*N KHz) N=1, 2, 4, 8, 16, 32 Characteristic Impedance 75Ω Nominal 75Ω Nominal Signal Level Range -15 to +15dBmV/64QAM A-TDMA: -15 to +15dBmV/256QAM +8 to +58dBmV/QPSK +8 to +55dBmV/(8,16)QAM +8 to +54 dBmV/(32,64)QAM S-CDMA: +8 to +53 dBmv/All Modulation 64QAM/256QAM QPSK/16,32,64QAM 128QAM for TCM Only Modulation Rate 5.056941/5.360537 Msym/sec A-TDMA: 160/320/640/1280/2560/5120 Ksym/sec LINKSYS BEFCMU10 ver. 3 User Manual S-CDMA: 1280/2560/5120 Ksym/sec Maximum Bit Rate 42.88Mbps/256QAM 30.72Mbps/64QAM 30.34Mbps/64QAM Forward Error Correction (FEC) RS(128,122)/Trellis Reed Solomon Signal to Noise Ratio (SNR) >30 Bit Error Rate (BER) 1×10-8 @ C/N=23.5dB, 64QAM with FEC 1×10-8 @ C/N=30dB, 256QAM with FEC, received power = -6dBmV to +15dBmV 1x10-8 @ C/N=33dB, 256QAM with FEC, received power = -15dBmV to –6dBmV Physical & Hardware: Dimensions • L = TBD • W = TBD • H = TBD Weight • TBD Ports • Ethernet Port (RJ-45) • USB port (Type B) • Power LED LEDs Green Blink - Booting / Diagnostics Green - Power On / Device Ready ON Orange • LINKSYS BEFCMU10 ver. 3 User Manual - Error ON Cable LED| Activity LED (Green color) OFF Blink OFF ON - Scanning D/S channels - D/S channel acquired / , Start ranging process Blink OFF - Ranging complete , start DHCP /TFTP/ToD/ Registration • ON OFF - Registered ON Blink - Traffic (Send / Receive) Ethernet LEDs OFF Green ON - No Ethernet Link - Ethernet Link Green Blink - Traffic Orange Blink- Collision • USB LED OFF - No USB Link or PC Off Orange Blink -USB cable attached / but drivers not loaded Green ON - USB Link / drivers loaded and port functional Green Blink - Traffic Reset Button • Restore Factory Default Settings Power Supply Adapter (Output) • 12VDC, 1A LINKSYS BEFCMU10 ver. 3 User Manual Power Consumption • Less than 9.5W Standards & Protocols: Standards • DOCSIS 1.0/1.1/2.0 Compliant • IEEE 802.3 • IEEE 802.3u • USB v1.1 • UDP/TCP/IP • DHCP • TP • ICMP • ARP • SNMP v1/v2c/v3 • Syslog • HTTP • TFTP • MIB 2 • RFC2786 • RFC2669 • CableLabs Private MIBs Operating Temperature • 32°F ~ 104°F (0°C to 40°C) Storage Temperature • -4°F ~ 158°F (-20°C to 70°C) Protocols MIB Support: Environment: LINKSYS BEFCMU10 ver. 3 User Manual Humidity • 20% ~ 90% Non-condensing Standards • DOCSIS / WHQL Safety • UL 1950 EMC • FCC Part 15 Class B • CE Class B • VCCI Class B Certification:
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2003:07:09 09:42:09Z Modify Date : 2003:07:09 17:45:41+08:00 Page Count : 36 Creation Date : 2003:07:09 09:42:09Z Mod Date : 2003:07:09 17:45:41+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : ellie Metadata Date : 2003:07:09 17:45:41+08:00 Creator : ellie Title : Microsoft Word - LINKSYS Cable Modem_rev03EXIF Metadata provided by EXIF.tools