Users Manual
Xiamen Hello Electronics Co., Ltd
1
2
3
Yewei Wujb Yehao
DESIGNED BY CHECKED BY APPROVAL
UPDATE:
NOTES EDITION DATE
APPROVAL CHECKED BY DATE
Customer Part No: 311.00008.005
Hello Part No:HOF-07C-FSK7879
CUSTOMER APPROVAL
(PLS COPY TO XIAMEN HELLO )
Part number
Xiamen Hello Electronics CO., LTD
Specification For Approval
Product Description: Radio frequency remote control
Customer: Foxconn
User manual
1、open the battery warehouse, according to identity into two AAA
batteries (1.5V × 2), insert the battery warehouse and close
battery warehouse;
2、Either a button press of the remote control will launch remote
code, until the release button. Wave the following figure：
3、The machine has mistakenly fired protection, that is, more than
five minutes after the keys have not yet released, such as
keys, remote control, remote control output will be shut down
into standby sleep state.
Product: RF control
FCC ID: Q87CTV1RM This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
IC ID: 3839A-CTV1RM Operation of this device is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Company: Cisco Systems, Inc.
Model: CTV1RM
country of origin: China
changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.