LINKSYS E3200 Advanced Dual-Band N Router User Manual Linksys E3000 User Guide

Download:
Mirror Download [FCC.gov]
Document ID	1441099
Application ID	ol1Yaz48ZRIEE4WU4E22/A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	317.58kB (3969700 bits)
Date Submitted	2011-03-31 00:00:00
Date Available	2011-05-16 00:00:00
Creation Date	2011-02-02 13:21:01
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2011-03-31 10:38:51
Document Title	Linksys E3000 User Guide
Document Creator	Adobe InDesign CS4 (6.0.6)
Document Author:	Cisco

User Guide
Linksys E3200
High Performance Dual-Band N Router
Linksys E3200
Table of Contents
Contents
Chapter 3: Cisco Connect
Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
Main Menu .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
Computers and Other Devices .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Parental Controls  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
Guest Access  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
Router Settings  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
How to Exit Cisco Connect  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
How to Access Cisco Connect  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
Chapter 4: Advanced Configuration
13
How to Access the Browser-Based Utility .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13
Setup > Basic Setup .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13
Setup > DDNS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17
Setup > MAC Address Clone .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18
Setup > Advanced Routing .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18
Wireless > Basic Wireless Settings .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19
Wireless > Wireless Security .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 22
Wireless > Wireless MAC Filter .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 24
Wireless > Advanced Wireless Settings .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 25
Security > Firewall .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26
Security > VPN Passthrough  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 27
Storage > Disk  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 27
Storage > Media Server .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 29
Storage > FTP Server .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 31
Storage > Administration  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Access Restrictions > Internet Access Policy .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 33
Applications and Gaming > Single Port Forwarding .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 34
Applications and Gaming > Port Range Forwarding  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Applications & Gaming > Port Range Triggering . . . . . . . . . . . . . . . . . . . . . . . . . .35
Applications and Gaming > DMZ  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 36
Applications and Gaming > QoS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 36
Administration > Management .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 39
Administration > Log .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 40
Administration > Diagnostics .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 40
Administration > Factory Defaults  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 41
Administration > Firmware Upgrade .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 41
Status > Router .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 42
Status > Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Status > Wireless Network .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 43
High Performance Dual-Band N Router
Linksys E3200
Table of Contents
Appendix A: Troubleshooting
44
Appendix B: How to Install and Access USB Storage
46
Overview  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 46
Windows 7  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 46
Windows Vista  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 48
Windows XP  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 50
Mac OS X  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 53
Advanced Configuration
(Advanced Users Only) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 56
Appendix C: Specifications
High Performance Dual-Band N Router
58
ii
Linksys E3200
Chapter 4: Advanced Configuration
After setting up the Router with the setup software
(located on the CD-ROM), the Router will be ready for use.
If you would like to change its advanced settings, use the
Router’s browser-based utility. This chapter describes each
web page of the utility and each page’s key functions. You
can access the utility via a web browser on a computer
connected to the Router.
Chapter 4: Advanced Configuration
Setup > Basic Setup
The first screen that appears is the Basic Setup screen. This
allows you to change the Router’s general settings.
The browser-based utility has these main tabs: Setup,
Wireless, Security, Storage, Access Restrictions, Applications
& Gaming, Administration, and Status. Additional tabs will
be available after you click one of the main tabs.
How to Access the Browser-Based Utility
To access the browser-based utility, launch the web
browser on your computer, and enter the Router’s default
IP address, 192.168.1.1 in the Address field. Then press
Enter.
NOTE: You can also access the browser‑based
utility on Windows computers by entering the
device name in the Address field. Refer to Device
Name under “Router Address” on page 6.
A login screen will appear. (Non-Windows 7 users will see
a similar screen.) In the User name field, enter admin. Then
enter the password created during the setup software.
(If you did not run the setup software, then use the
default password, admin. You can set a new password
on the Administration > Management screen. Refer to
“Administration > Management” on page 28.) Click OK
to continue.
Setup > Basic Setup
Language
Select your language To use a different language, select
one from the drop-down menu. The language of the
browser-based utility will change five seconds after you
select another language.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Internet Setup
Windows 7 Login Screen
NOTE: You can also access the browser‑based
utility through the Cisco Connect software. For
more information, refer to “Router Settings” on
page 10.
High Performance Wireless-N Router
The Internet Setup section configures the Router to your
Internet connection. Most of this information can be
obtained through your Internet Service Provider (ISP).
Internet Connection Type
Select the type of Internet connection your ISP provides
from the drop-down menu. The available types are:
••
Automatic Configuration - DHCP
••
Static IP
••
PPPoE
••
PPTP
••
L2TP
••
Telstra Cable
Linksys E3200
Automatic Configuration - DHCP
The default Internet Connection Type is set to Automatic
Configuration - DHCP. Keep the default only if your ISP
supports DHCP (Dynamic Host Configuration Protocol) or
if you connect using a dynamic IP Address. (This option
usually applies to cable connections.)
Internet Connection Type > Automatic Configuration - DHCP
Static IP
If you are required to use a permanent IP address to
connect to the Internet, select Static IP.
Chapter 4: Advanced Configuration
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle
Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router
to automatically re-establish your connection as soon
as you attempt to access the Internet again. To use this
option, select Connect on Demand. In the Max Idle Time
field, enter the number of minutes you want to elapse
before your Internet connection terminates. The default is
5 minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically
re-establish your connection. To use this option, select
Keep Alive. In the Redial Period field, specify how often
the Router should check the Internet connection. The
default is 30 seconds.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that
applies to connections in Europe only.
Internet Connection Type > Static IP
IP Address This is the Router’s IP address, when seen
from the Internet. Your ISP will provide you with the IP
address you need to enter here.
Subnet Mask This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with the
Gateway address, which is the ISP server’s IP address.
DNS Your ISP will provide you with at least one DNS
(Domain Name System) server IP address.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol
over Ethernet) to establish Internet connections. If you are
connected to the Internet through a DSL line, check with
your ISP to see if they use PPPoE. If they do, you will have
to enable PPPoE.
Internet Connection Type > PPTP
If your ISP supports DHCP or you are connecting through
a dynamic IP address, then select Obtain an IP Address
Automatically. If you are required to use a permanent IP
address to connect to the Internet, then select Specify an
IP Address. Then configure the following:
Internet IP Address This is the Router’s IP address, as
seen from the Internet. Your ISP will provide you with the
IP Address you need to specify here.
Internet Connection Type > PPPoE
Subnet Mask This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
User Name and Password Enter the User Name and
Password provided by your ISP.
Default Gateway Your ISP will provide you with the
Gateway address, which is the ISP server’s IP address.
Service Name (optional) If provided by your ISP, enter
the Service Name.
DNS Your ISP will provide you with at least one DNS
(Domain Name System) Server IP address.
High Performance Wireless-N Router
Linksys E3200
Server IP Address Your ISP will provide you with the
Server IP Address.
User Name and Password Enter the User Name and
Password provided by your ISP.
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle
Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router
to automatically re-establish your connection as soon
as you attempt to access the Internet again. To use this
option, select Connect on Demand. In the Max Idle Time
field, enter the number of minutes you want to elapse
before your Internet connection terminates. The default is
5 minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically
re-establish your connection. To use this option, select
Keep Alive. In the Redial Period field, specify how often
the Router should check the Internet connection. The
default is 30 seconds.
L2TP
Layer 2 Tunneling Protocol (L2TP) is a service that applies
to connections in Israel only.
Chapter 4: Advanced Configuration
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically
re-establish your connection. To use this option, select
Keep Alive. In the Redial Period field, specify how often
the Router should check the Internet connection. The
default is 30 seconds.
Telstra Cable
Telstra Cable is a service that applies to connections in
Australia only.
Internet Connection Type > Telstra Cable
Server IP Address This is the IP address of the Telstra
Cable. Your ISP will provide you with the IP Address you
need to specify here.
User Name and Password Enter the User Name and
Password provided by your ISP.
Optional Settings
Some of these settings may be required by your ISP. Verify
with your ISP before making any changes.
Optional Settings
Internet Connection Type > L2TP
Server IP Address This is the IP address of the L2TP
Server. Your ISP will provide you with the IP Address you
need to specify here.
User Name and Password Enter the User Name and
Password provided by your ISP.
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle
Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router
to automatically re-establish your connection as soon
as you attempt to access the Internet again. To use this
option, select Connect on Demand. In the Max Idle Time
field, enter the number of minutes you want to elapse
before your Internet connection terminates. The default is
5 minutes.
High Performance Wireless-N Router
Host Name/Domain Name These fields allow you to
supply a host and domain name for the Router. Some ISPs,
usually cable ISPs, require these names as identification.
You may have to check with your ISP to see if your
broadband Internet service has been configured with a
host and domain name. In most cases, leaving these fields
blank will work.
MTU MTU is the Maximum Transmission Unit. It specifies
the largest packet size permitted for Internet transmission.
Select Manual if you want to manually enter the largest
packet size that is transmitted. To have the Router select
the best MTU for your Internet connection, keep the
default setting, Auto.
Linksys E3200
Chapter 4: Advanced Configuration
Size When Manual is selected in the MTU field, this option
is enabled. Leave this value in the 1200 to 1500 range. The
default size depends on the Internet Connection Type:
••
DHCP, Static IP, or Telstra: 1500
••
PPPoE: 1492
••
PPTP or L2TP: 1460
Network Setup
The Network Setup section configures the IP settings for
your local network.
DHCP Server DHCP is enabled by factory default. If you
already have a DHCP server on your network, or you do
not want a DHCP server, then select Disabled (no other
DHCP features will be available).
DHCP Reservation Click DHCP Reservation if you want
to assign a fixed local IP address to a specific device on
your network. This is helpful if you have a device you need
to access at the same address all the time such as a media
server or print server. You can reserve the IP address for
the specific device by selecting it from the list of devices
or by manually entering the MAC address of the device.
DHCP Reservation
Router Address
You will see a list of DHCP clients with the following
information: Client Name, Interface, IP Address, and
MAC Address.
This presents the Router’s IP Address, the Subnet Mask,
and the Device Name as seen by your network.
Router IP Address
IP Address This is the IP address of the router and is used
as the base for all of your local network settings.
Subnet Mask This is the subnet mask address for your
router. It offers a selection of addresses from a drop-down
menu. Most users will not need to change this setting.
Device Name The default device name is Ciscoxxxxx.
xxxxx represents the last 5 digits of your serial number.
This can be found on the bottom of the router. (The Device
name is also the Router’s NetBIOS name.)
NOTE: If you used the setup software
for installation, then the device name is
synchronized with the name of your wireless
network (up to 15 characters).
DHCP Server Settings
The settings allow you to configure the Router’s DHCP
server function. The Router can be used as a DHCP server
for your network. A DHCP server automatically assigns an
IP address to each computer or device on your network.
NOTE: If you choose to enable the DHCP server
option, make sure there is no other DHCP server
on your network.
DHCP Reservation
••
Select Clients from DHCP Table Click the Select
check box to reserve a client’s IP address. Then click
Add Clients.
••
Manually Add Client To manually assign an IP
address, enter the client’s name in the Enter Client
Name field. Enter the IP address you want it to have
in the Assign IP Address field. Enter its MAC address in
the To This MAC Address field. Then click Add and click
Save Settings.
Clients Already Reserved
A list of DHCP clients and their fixed local IP addresses
are displayed at the bottom of the screen. If you want
to remove a client from this list, click Remove.
Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. To update
the on-screen information, click Refresh. To exit this
screen, click Close.
Start IP Address The Start IP Address specifies the
starting IP address for the range of addresses assigned
by your Router when it functions as a DHCP server. (The
first IP address assigned by the Router will be randomly
selected within the range you specify.)
DHCP Server Setting
High Performance Wireless-N Router
Because the Router’s default IP address is 192.168.1.1,
the Start IP Address must be 192.168.1.2 or greater, but
Linksys E3200
Chapter 4: Advanced Configuration
smaller than 192.168.1.254. The default Start IP Address is
192.168.1.100.
Maximum Number of Users Enter the maximum
number of computers that you want the DHCP server to
assign IP addresses to. This number cannot be greater
than 253. The default is 50.
IP Address Range The range of available IP addresses is
displayed.
Client Lease Time The Client Lease Time is the amount
of time a network user will be allowed connection to the
Router with their current dynamic IP address. Enter the
amount of time, in minutes, that the user will be “leased”
this dynamic IP address. After the time is up, the user will
be automatically assigned a new dynamic IP address, or
the lease will be renewed. The default is 0 minutes, which
means one day.
Static DNS (1-3) The Domain Name System (DNS) is how
the Internet translates domain or website names into
Internet addresses or URLs. Your ISP will provide you with at
least one DNS Server IP Address. If you wish to use another,
enter that IP Address in one of these fields. You can enter up
to three DNS Server IP Addresses here. The Router will use
these for quicker access to functioning DNS servers.
Setup > DDNS
The Router offers a Dynamic Domain Name System
(DDNS) feature. DDNS lets you assign a fixed host and
domain name to a dynamic Internet IP address. It is useful
when you are hosting your own website, FTP (File Transfer
Protocol) server, or other server behind the Router.
Before you can use this feature, you need to sign
up for DDNS service with a DDNS service provider,
www.dyndns.org or www.tzo.com. If you do not want to
use this feature, keep the default, Disabled.
DDNS
DDNS Service
If your DDNS service is provided by DynDNS.org, then
select DynDNS.org from the drop-down menu. If your
DDNS service is provided by TZO, then select TZO.com.
The features available on the DDNS screen will vary,
depending on which DDNS service provider you use.
DynDNS.org
WINS The Windows Internet Naming Service (WINS)
manages each computer’s interaction with the Internet. If
you use a WINS server, enter that server’s IP address here.
Otherwise, leave this blank.
Time Settings
Time Setting
Time Zone Select the time zone in which your network
functions from this drop-down menu.
Automatically adjust clock for daylight saving
changes Select this option to have the Router
automatically adjust for daylight saving time.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Reboot
Setup > DDNS > DynDNS
Username Enter the Username for your DDNS account.
Password Enter the Password for your DDNS account.
Host Name The DDNS URL assigned by the DDNS service
is displayed.
System Select the DynDNS service you use: Dynamic,
Static, or Custom. The default selection is Dynamic.
Mail Exchange (Optional) Enter the address of your mail
exchange server, so e-mails to your DynDNS address go to
your mail server.
Reboot
Reboot Use this option to reboot your Router.
High Performance Wireless-N Router
Backup MX This feature allows the Mail eXchange (MX)
server to be a backup. To disable this feature, keep the
default, Disabled. To enable the feature, select Enabled. If
you are not sure which setting to select, keep the default,
Disabled.
Linksys E3200
Chapter 4: Advanced Configuration
Wildcard This setting enables or disables wildcards
for your host. For example, if your DDNS address is
myplace.dyndns.org and you enable wildcards, then
x.myplace.dyndns.org will work as well (x is the wildcard).
To disable wildcards, keep the default, Disabled. To
enable wildcards, select Enabled. If you are not sure
which setting to select, keep the default, Disabled.
Internet IP Address The Router’s Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed.
Update To manually trigger an update, click Update.
Setup > MAC Address Clone
MAC Address Clone
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Enabled/Disabled To have the MAC address cloned,
select Enabled.
TZO.com
MAC Address Enter the MAC address registered with
your ISP here.
Clone My PC’s MAC Click this button to clone the MAC
address of the computer you are using.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Setup > Advanced Routing
Setup > DDNS > TZO
This screen is used to set up the Router’s advanced
functions. Operating Mode allows you to select the
type(s) of advanced functions you use. Dynamic Routing
automatically adjusts how packets travel on your network.
Static Routing sets up a fixed route to another network
destination.
E-mail Address, TZO Password, and Domain
Name Enter the settings of the account you set up with
TZO.
Internet IP Address The Router’s Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed.
Update To manually trigger an update, click Update.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification. Some ISPs require you
to register a MAC address in order to access the Internet. If
you do not wish to re-register the MAC address with your
ISP, you can use the MAC Address Clone feature to assign
the currently registered MAC address to the Router.
High Performance Wireless-N Router
Setup > Advanced Routing
Advanced Routing
NAT
Enabled/Disabled If this Router is hosting your network’s
connection to the Internet, keep the default, Enabled. If
another router exists on your network, select Disabled.
When the NAT setting is disabled, dynamic routing will be
available.
Linksys E3200
Chapter 4: Advanced Configuration
Dynamic Routing (RIP)
Dynamic routing uses the Routing Information Protocol
(RIP). This option enables the Router to automatically
adjust to physical changes in the network’s layout and
exchange routing tables with other router(s). The Router
determines the network packets’ route based on the
fewest number of hops between the source and the
destination.
Enabled/Disabled When the NAT setting is enabled, the
Dynamic Routing option is automatically disabled. When
the NAT setting is disabled, this option is available. Select
Enabled to use the Dynamic Routing option.
Routing Table
For each route, the Destination LAN IP address, Subnet
Mask, Gateway, and Interface are displayed. Click
Refresh to update the information. Click Close to exit
this screen.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Wireless > Basic Wireless Settings
The basic settings for wireless networking are set on this
screen.
Static Routing
There are two ways to configure the Router’s wireless
network(s), manual and Wi-Fi Protected Setup.
A static route is a pre-determined pathway that network
information must travel to reach a specific host or
network. Enter the information described below to set up
a new static route.
Wi-Fi Protected Setup is a feature that makes it easy to set
up your wireless network. If you have client devices, such
as wireless adapters, that support Wi-Fi Protected Setup,
then you can use Wi-Fi Protected Setup.
Route Entries To set up a static route between the Router
and another network, select a number from the dropdown list. Click Delete This Entry to delete a static route.
Simultaneous Networks
Enter Route Name Enter a name for the Route here,
using a maximum of 25 alphanumeric characters.
Destination LAN IP The Destination LAN IP is the address
of the remote network or host to which you want to assign
a static route.
Subnet Mask The Subnet Mask determines which
portion of a Destination LAN IP address is the network
portion, and which portion is the host portion.
Gateway This is the IP address of the gateway device that
allows for contact between the Router and the remote
network or host.
Interface This interface tells you whether the Destination
IP Address is on the LAN & Wireless (Ethernet and wireless
networks) or the Internet (WAN).
Click Show Routing Table to view the static routes you
have already set up.
For more wireless bandwidth, the Router can create two
simultaneous yet separate Wireless-N networks, one using
the Wireless-N 5 GHz band and one using the Wireless-N
2.4 GHz band. You can use Wi-Fi Protected Setup to
easily configure and connect to both networks (refer to
“Wi-Fi Protected Setup” on page 11), or you can manually
configure the Router.
If you use manual configuration, then set up each network
with the following:
••
Unique Network Name (SSID)
••
Wireless
security
settings
(refer
to
“5 GHz or 2.4 GHz Wireless Security” on page 12)
Decide which computers and other wireless devices
should join which network. Wireless-N devices support
both the 5 GHz and 2.4 GHz bands, so they can join either
the 5 GHz or 2.4 GHz network. Wireless-G and Wireless-B
devices support only the 2.4 GHz band, so they should
join the 2.4 GHz network. Wireless-A devices support only
the 5 GHz band, so they should join the 5 GHz network.
For the 5 GHz network, configure all computers and other
wireless devices with the same 5 GHz Network Name
(SSID) and wireless security settings. For the 2.4 GHz
network, configure all computers and other wireless
devices with the same 2.4 GHz Network Name (SSID) and
wireless security settings.
Routing Table
High Performance Wireless-N Router
NOTE: Make sure each network uses a unique
Network Name (SSID).
Linksys E3200
Chapter 4: Advanced Configuration
5 GHz Wireless Settings
Network Mode Select the wireless standards running on
your 5 GHz network.
Wireless > Basic Wireless Settings
Configuration View To manually configure your
wireless networks, select Manual. Proceed to the Wireless
Configuration (Manual) section. To use Wi-Fi Protected
Setup, select Wi-Fi Protected Setup. Proceed to
“Wi-Fi Protected Setup” on page 11.
Wireless Configuration (Manual)
••
Mixed If you have both Wireless-A and Wireless-N
(5 GHz) devices in your network, keep the default,
Mixed.
••
Wireless-A Only If you have only Wireless-A devices,
select Wireless-A Only.
••
Wireless-N Only If you have only Wireless-N (5 GHz)
devices, select Wireless‑N Only.
••
Disabled If you do not have any Wireless-A and
Wireless-N (5GHz) devices in your network, select
Disabled.
Network Name (SSID) The Service Set Identifier (SSID)
is the network name shared by all devices in a wireless
network. It is case-sensitive and must not exceed 32
keyboard characters. The default is Ciscoxxxxx (xxxxx are
the last five digits of the Router’s serial number, found on
the product label on the left side of the Router’s bottom
panel). The setup software that you use to install your
Router and set up your wireless network changes the
default Network Name to an easy-to-remember name.
Your Linksys E3200 can run two networks at the same
time, one network using the 5 GHz radio frequency band
and the other network using the 2.4 GHz radio frequency
band. This allows you to isolate higher-priority traffic, such
as video and voice applications, on the 5 GHz network,
which is less prone to interference.
The computers and devices running your video and voice
applications can use the 5 GHz network, while your guest
access and computers that are only browsing the web can
use the 2.4 GHz network.
Internet
NOTE: If you restore the Router’s factory default
settings (by pressing the Reset button or using
the Administration > Factory Defaults screen),
the Network Name will return to its default
value, and all devices on your wireless network
will need to be reconnected..
Channel Width For best performance in a network
using Wireless-A and Wireless-N (5 GHz) devices, keep the
default, Auto (20MHz or 40MHz). For a channel width
of 40 MHz, select 40MHz only. For a channel width of 20
MHz, select 20MHz only.
Channel Select the channel from the drop-down list for
Wireless-A and Wireless-N (5GHz) networking. If you are
not sure which channel to select, keep the default, Auto.
Modem
Family Notebook
Printer
Router
Gaming Console
Blu-ray Player
SSID Broadcast When wireless clients survey the local
area for wireless networks to associate with, they will
detect the SSID broadcast by the Router. To broadcast the
Router’s SSID, keep the default, Enabled. If you do not
want to broadcast the Router’s SSID, then select Disabled.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
2.4 GHz Wireless Settings
5 GHz Wireless Network (Local Devices Only)
2.4 GHz Wireless Network (Local or Guest Devices)
If you set the Configuration View to Manual, the Basic
Wireless Settings screen displays the following fields.
High Performance Wireless-N Router
Network Mode Select the wireless standards running on
your 2.4 GHz network.
••
Mixed If you have both Wireless-B, Wireless-G and
Wireless-N (2.4 GHz) devices in your network, keep the
default, Mixed.
10
Linksys E3200
••
Wireless-B/G Only If you have both Wireless-B and
Wireless-G (2.4 GHz) devices in your network, select
Wireless-B/G Only.
••
Wireless-B Only If you have only Wireless-B devices,
select Wireless-B Only.
••
Wireless-G Only If you have only Wireless-G devices,
select Wireless-G Only.
••
Wireless-N Only If you have only Wireless-N (2.4 GHz)
devices, select Wireless-N Only.
••
Disabled If you do not have any Wireless-B, Wireless-G
and Wireless-N (2.4 GHz) devices in your network,
select Disabled.
Network Name (SSID) The Service Set Identifier (SSID)
is the network name shared by all devices in a wireless
network. It is case-sensitive and must not exceed 32
keyboard characters. The default is Ciscoxxxxx (xxxxx are
the last five digits of the Router’s serial number, found on
the product label on the left side of the Router’s bottom
panel). The setup software that you use to install your
Router and set up your wireless network changes the
default Network Name to an easy-to-remember name.
NOTE: If you restore the Router’s factory default
settings (by pressing the Reset button or using
the Administration > Factory Defaults screen),
the Network Name will return to its default
value, and all devices on your wireless network
will need to be reconnected..
Channel Width For best performance in a network using
Wireless-B, Wireless-G and Wireless-N (2.4 GHz) devices,
select Auto (20MHz or 40MHz). For a channel width of 20
MHz, keep the default, 20MHz only.
Channel Select the channel from the drop-down list
for Wireless-B, Wireless-G, and Wireless-N (2.4 GHz)
networking. If you are not sure which channel to select,
keep the default, Auto.
SSID Broadcast When wireless clients survey the local
area for wireless networks to associate with, they will
detect the SSID broadcast by the Router. To broadcast the
Router’s SSID, keep the default, Enabled. If you do not
want to broadcast the Router’s SSID, then select Disabled.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Wi-Fi Protected Setup
There are three methods available. Use the method that
applies to the client device you are configuring.
Chapter 4: Advanced Configuration
Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)
NOTE: Wi-Fi Protected Setup configures one
client device at a time. Repeat the instructions
for each client device that supports Wi-Fi
Protected Setup.
1.	 Use the Wi-Fi Protected Setup Button Use this
method if your client device has a Wi-Fi Protected
Setup button.
a.	 Click or press the Wi-Fi Protected Setup button on
the client device.
b.	 Click the Wi‑Fi Protected Setup button on the
Router’s Wi-Fi Protected Setup screen.
The Wi-Fi Protected Setup LED flashes blue for two
minutes during the Wi-Fi Protected Setup process
and lights up blue when the Wi-Fi Protected Setup
process is successful.
The LED lights up amber if there is an error during
the Wi‑Fi Protected Setup process. Make sure the
client device supports Wi‑Fi Protected Setup. Wait
until the LED is off, and then try again.
The LED flashes when a Wi‑Fi Protected Setup
session is active. The Router supports one session
at a time. Wait until the LED is solidly lit, or off before
starting the next Wi-Fi Protected Setup session.
c.	 After the client device has been configured,
click OK on the Router’s Wi-Fi Protected Setup
screen. Then refer back to your client device or its
documentation for further instructions.
2.	 Enter the client device’s PIN on the Router Use
this method if your client device has a Wi-Fi Protected
Setup PIN number.
a.	 Enter the PIN number from the client device in the
field on the Router’s Wi-Fi Protected Setup screen.
High Performance Wireless-N Router
11
Linksys E3200
Chapter 4: Advanced Configuration
b.	 Click the Register button on the Router’s Wi-Fi
Protected Setup screen.
c.	 After the client device has been configured,
click OK on the Router’s Wi-Fi Protected Setup
screen. Then refer back to your client device or its
documentation for further instructions.
3.	 Enter the Router’s PIN on your client device Use
this method if your client device asks for the Router’s
PIN number.
a.	 On the client device, enter the PIN number listed on
the Router’s Wi-Fi Protected Setup screen. (It is also
listed on the label on the bottom of the Router.)
b.	 After the client device has been configured,
click OK on the Router’s Wi-Fi Protected Setup
screen. Then refer back to your client device or its
documentation for further instructions.
Security Mode
Select the security method for each wireless network. If
you do not want to use wireless security, select Disabled.
NOTE: If you are not using WPA2/WPA MixedMode then each device in your wireless
network MUST use the same security mode
and passphrase, or else the network will not
function properly.
WPA2/WPA Mixed Mode
NOTE: If you select WPA2/WPA Mixed Mode as
your Security Mode, each device in your wireless
network MUST use the same passphrase.
The Network Name (SSID), Security, and Passphrase are
displayed at the bottom of the screen.
NOTE: If you have client devices that do not
support Wi-Fi Protected Setup, note the wireless
settings, and then manually configure those
client devices.
Wireless > Wireless Security
The wireless security settings configure the security
of your wireless network(s). The Router supports the
following wireless security options: WPA/WPA2 Mixed
Mode (default), WPA2 Personal, WPA Personal, WEP, and
RADIUS. (WPA stands for Wi-Fi Protected Access. WEP
stands for Wireless Equivalent Privacy. RADIUS stands for
Remote Authentication Dial-In User Service.)
WPA2/WPA Mixed Mode
Passphrase Enter a passphrase of 8-63 characters. The
default is password. The setup software that you use
to install your Router and set up your wireless network
changes the default passphrase.
WPA2 Personal
Personal Options
Security Option
Strength
WPA2 Personal
Strongest
WPA2/WPA Mixed Mode
WPA2: Strongest
WPA: Strong
WPA Personal
Strong
WEP
Basic
NOTE: If you select WPA2 Personal as your
Security Mode, each device in your wireless
network MUST use WPA2 Personal and the
same passphrase.
Office Option
RADIUS is the security option offered for networks that
use a RADIUS server for authentication.
5 GHz or 2.4 GHz Wireless Security
Wireless security is strongly recommended, and WPA2 is
the strongest method available. Use WPA2 if it is supported
by all of your wireless devices.
WPA2 Personal
High Performance Wireless-N Router
12
Linksys E3200
Chapter 4: Advanced Configuration
Passphrase Enter a passphrase of 8-63 characters. The
default is password. The setup software that you use
to install your Router and set up your wireless network
changes the default passphrase.
WPA Personal
NOTE: If you select WPA Personal as your
Security Mode, each device in your wireless
network MUST use WPA Personal and the same
passphrase.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
IMPORTANT: If you select WEP as your Security
Mode, each device in your wireless network
MUST use WEP and the same encryption and
shared key.
WPA Personal
Passphrase Enter a passphrase of 8-63 characters. The
default is password. The setup software that you use
to install your Router and set up your wireless network
changes the default passphrase.
WEP
Encryption Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits. The default is
64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key Select a default TX (Transmit) Key (choose which
Key to use). The default is 1.
High Performance Wireless-N Router
13
Linksys E3200
Chapter 4: Advanced Configuration
RADIUS
Wireless > Wireless MAC Filter
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Wireless access can be filtered (restricted) by specifying
the MAC addresses of the devices in your wireless network.
IMPORTANT: If you select RADIUS as your
Security Mode, each device in your wireless
network MUST use RADIUS and the same WEP
encryption and shared key.
Wireless > Wireless MAC Filter
Wireless MAC Filter
RADIUS
Enabled/Disabled To filter wireless users by the MAC
addresses of their computers or devices, select Enabled.
Otherwise, keep the default, Disabled.
RADIUS Server Enter the IP address of the RADIUS server.
Access Restriction
RADIUS Port Enter the port number of the RADIUS
server. The default is 1812.
Prevent When the Wireless MAC Filter is enabled and this
option is selected, PCs listed in the MAC Address filter list
will be prevented from accessing the wireless network.
Shared Key Enter the key shared between the Router
and the server.
Encryption Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits. The default is
64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
Permit When the Wireless MAC Filter is enabled and this
option is selected, only PCs listed in the MAC Address filter
list will be granted access to the wireless network.
MAC Address Filter List
Wireless Client List Click this to open the Wireless Client
List screen.
TX Key Select a default TX (Transmit) Key (choose which
Key to use). The default is 1.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Wireless Client List
High Performance Wireless-N Router
14
Linksys E3200
Chapter 4: Advanced Configuration
Wireless Client List
Frame Burst Enabling this option should provide your
network with greater performance, depending on the
manufacturer of your wireless products. To use the Frame
Burst option, keep the default, Enabled.
This screen shows computers and other devices on
the wireless network. The list can be sorted by Client
Name, Interface, IP Address, MAC Address, and Status.
Select Save to MAC Address Filter List for any device
you want to add to the MAC Address Filter List. Then
click Add.
To update the on-screen information, click Refresh.
To exit this screen and return to the Wireless MAC Filter
screen, click Close.
MAC 01-32 Enter the MAC addresses of the devices
whose wireless access you want to control.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Wireless > Advanced Wireless Settings
The Advanced Wireless Settings screen is used to set up
the Router’s advanced wireless functions. These settings
should only be adjusted by an advanced user because
incorrect settings can reduce wireless performance. In
most cases, keep the default settings.
Authentication Type The default is Auto, which allows
either Open System or Shared Key authentication to be
used. With Open System authentication, the sender and
the recipient do NOT use a WEP key for authentication.
With Shared Key authentication, the sender and recipient
use a WEP key for authentication.
Basic Rate The Basic Rate setting is not actually one rate
of transmission but a series of rates at which the Router
can transmit. (The Basic Rate is not the actual rate of
data transmission. If you want to specify the Router’s rate
of data transmission, configure the Transmission Rate
setting.) The Router will advertise its Basic Rate to the other
wireless devices in your network, so they know which
rates will be used. The Router will also advertise that it will
automatically select the best rate for transmission. The
default setting is Default, for transmission at all standard
wireless rates (1-2 Mbps, 5.5 Mbps, 11 Mbps, 18 Mbps, and
24 Mbps).
Transmission Rate The rate of data transmission should
be set depending on the speed of your wireless network.
You can select from a range of transmission speeds, or you
can select Auto to have the Router automatically use the
fastest possible data rate and enable the Auto-Fallback
feature. Auto-Fallback will negotiate the best possible
connection speed between the Router and a wireless
client. The default value is Auto.
N Transmission Rate The rate of data transmission
should be set depending on the speed of your Wireless-N
networking. You can select from a range of transmission
speeds, or you can select Auto to have the Router
automatically use the fastest possible data rate and enable
the Auto-Fallback feature. Auto-Fallback will negotiate the
best possible connection speed between the Router and a
wireless client. The default is Auto.
Transmission Power Select the appropriate level of
transmission power: High, Medium, or Low. In most
cases, keep the default, High.
Wireless > Advanced Wireless Settings
5 GHz and 2.4 GHz Advanced Wireless
CTS Protection Mode The Router automatically
uses CTS (Clear-To-Send) Protection Mode when your
Wireless-N and Wireless-G devices are experiencing severe
problems and are not able to transmit to the Router in an
environment with heavy 802.11b traffic. This option boosts
the Router’s ability to catch all Wireless-N and Wireless-G
transmissions but severely decreases performance. To use
this option, keep the default, Auto. To disable this option,
select Disabled.
AP Isolation This isolates all wireless clients and wireless
devices on your network from each other. Wireless devices
will be able to communicate with the Router but not
with each other. To use this function, select Enabled. AP
Isolation is disabled by default.
High Performance Wireless-N Router
15
Linksys E3200
Beacon Interval A beacon is a packet broadcast by the
Router to synchronize the wireless network. Enter a value
between 20 and 1000 milliseconds. The Beacon Interval
value indicates the frequency interval of the beacon. The
default value is 100.
Chapter 4: Advanced Configuration
Security > Firewall
The Firewall screen is used to configure a firewall that can
filter out various types of unwanted traffic on the Router’s
local network.
DTIM Interval This value, between 3 and 255, indicates
the interval of the Delivery Traffic Indication Message
(DTIM). A DTIM field is a countdown field informing
clients of the next window for listening to broadcast
and multicast messages. When the Router has buffered
broadcast or multicast messages for associated clients, it
sends the next DTIM with a DTIM Interval value. Its clients
hear the beacons and awaken to receive the broadcast
and multicast messages. The default value is 3.
Fragmentation Threshold This value specifies the
maximum size for a packet before data is fragmented
into multiple packets. If you experience a high packet
error rate, you may slightly increase the Fragmentation
Threshold. Setting the Fragmentation Threshold too low
may result in poor network performance. Only minor
reduction of the default value is recommended. In most
cases, it should remain at its default value of 2346.
RTS Threshold Should you encounter inconsistent data
flow, only minor reduction of the default value, 2347, is
recommended. If a network packet is smaller than the
preset RTS threshold size, the RTS/CTS mechanism will
not be enabled. The Router sends Request to Send (RTS)
frames to a particular receiving station and negotiates
the sending of a data frame. After receiving an RTS, the
wireless station responds with a Clear to Send (CTS) frame
to acknowledge the right to begin transmission. The RTS
Threshold value should remain at its default value of 2347.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Security > Firewall
Firewall
SPI Firewall Protection To use firewall protection,
keep the default selection, Enabled. To turn off firewall
protection, select Disabled.
Internet Filters
Filter Anonymous Internet Requests This feature
makes it more difficult for outside users to work their
way into your network. This option is enabled by default.
Disable it to allow anonymous Internet requests.
Filter Multicast Multicasting allows for multiple
transmissions to specific recipients at the same time. If
multicasting is permitted, then the Router will allow IP
multicast packets to be forwarded to the appropriate
computers. Select this option to enable the filter. This
option is disabled by default.
Filter Internet NAT Redirection This feature is used to
prevent a local computer from using a URL or Internet
address to access the local server. Select this option to
enable the filter. This option is disabled by default.
Filter IDENT (Port 113) The Filter IDENT (Identification)
option keeps port 113 from being scanned by devices
outside of your local network. This option is enabled by
default. Disable it to allow port 113 to be scanned.
Web Filters
Proxy Use of WAN proxy servers may compromise the
Gateway’s security. Denying Proxy will disable access to
any WAN proxy servers. Select this option to enable proxy
filtering. Deselect the feature to allow proxy access.
High Performance Wireless-N Router
16
Linksys E3200
Chapter 4: Advanced Configuration
Java Java is a programming language for websites. If you
deny Java, you run the risk of not having access to Internet
sites created using this programming language. Select
this option to enable Java filtering. Deselect the feature to
allow Java usage.
Storage > Disk
ActiveX ActiveX is a programming language for websites.
If you deny ActiveX, you run the risk of not having access to
Internet sites created using this programming language.
Select this option to enable ActiveX filtering. Deselect the
feature to allow ActiveX usage.
When a USB drive is connected to the USB port of the
Router, a shared folder titled public is automatically
created and shared on the USB drive. You can access the
contents via Windows Explorer or the Mac Finder. For
details on accessing the contents, refer to How to Install
and Access USB Storage - Overview, page 36.
Cookies A cookie is data stored on your computer and
used by Internet sites when you interact with them. Select
this option to filter cookies. Deselect the feature to allow
cookie usage.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Security > VPN Passthrough
The VPN Passthrough screen allows you to enable VPN
tunnels using IPSec, L2TP, or PPTP protocols to pass through
the Router’s firewall.
Your Linksys E3200 has a USB port on the back of the
Router. This allows you to connect an external USB drive
and access the contents over the network.
The Storage options can be edited in the browser-based
utility when a USB drive is plugged in.
The Disk screen describes the disk (USB drive) currently
attached to the Router. Use this screen to create shared
folders, safely remove a disk, or format a disk (any data on
the disk will be deleted during formatting).
Shared folders are folders on the disk that are accessible
via the network. You can specify individual folders that
you want shared or share the entire partition. By default,
existing files and folders are not shared on a disk that is
plugged in for the first time. The only folder that is shared
by default is the public folder that is automatically created.
You can manually provide access to additional folders and
grant access to specific users or groups.
Security > VPN Passthrough
VPN Passthrough
IPSec Passthrough Internet Protocol Security (IPSec) is
a suite of protocols used to implement secure exchange
of packets at the IP layer. To allow IPSec tunnels to pass
through the Router, keep the default, Enabled.
L2TP Passthrough Layer 2 Tunneling Protocol is the
method used to enable Point-to-Point sessions via the
Internet on the Layer 2 level. To allow L2TP tunnels to pass
through the Router, keep the default, Enabled.
PPTP Passthrough Point-to-Point Tunneling Protocol
(PPTP) allows the Point-to-Point Protocol (PPP) to be
tunneled through an IP network. To allow PPTP tunnels to
pass through the Router, keep the default, Enabled.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Storage > Disk
Disk Management
If a formatted disk is connected to the Router, then its name
is displayed. For each partition of the disk, the Partition,
File System, Capacity, and Free Space information are
displayed.
Safely Remove Disk Before physically disconnecting a
disk from the Router, click Safely Remove Disk first. This
prevents the possible loss of data, which may occur if you
remove the disk while it is transferring data.
High Performance Wireless-N Router
17
Linksys E3200
Chapter 4: Advanced Configuration
Create Share To create a shared folder, click this option
for the appropriate partition, and the Shared Folder screen
appears.
Create Share > Shared Folder
Use this screen to create a shared folder.
Return to Upper Folder To go back up a folder level from
a subfolder, click this button.
Access
Specify which user groups have read-and-write or readonly access to the folder. (To create user groups, refer to
“Create or Edit a Group Account” on page 22.)
Available Groups To allow a group access to the folder,
select it, and then click the >> button.
Groups with Access To block a group from accessing the
folder, select it, and then click the << button.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes. Click Close to exit the
screen.
Shared Folder
Device Name The default device name is Ciscoxxxxx.
xxxxx represents the last 5 digits of your serial number.
This can be found on the bottom of the router. (The Device
name is also the Router’s NetBIOS name.)
Shared Folder
NOTE: If you used the setup software
for installation, then the device name is
synchronized with the name of your wireless
network (up to 15 characters).
Display Name Create a name for the folder. This will
appear in the Shared Folder table on the Disk screen.
Shared Disk IP Address The IP address of the disk is
displayed.
Partition The name of the partition is displayed.
Summary To view a list of shared folders, click this option.
Location The location of the current folder is displayed.
If you haven’t selected a folder or shared the partition, a
location will not be displayed.
For each shared folder, the Display Name, Partition, and
Shared Folder location are displayed.
New Folder Type in a new folder name if you want to
create a new subfolder in the current location. Then click
Create.
Edit To change the access settings of a shared folder, click
this option, and the Shared Folder screen appears.
Share entire Partition Select this option if you want
to share the entire partition. If your disk doesn’t have
multiple partitions, selecting this option will share the
entire disk. If you do not want to share the entire partition,
then select the folder you do want to share.
Enter into Folder Select to go into the specified sub­
folder.
Return to Upper Folder To move back up a folder level,
select this option.
Current Folder The current folder is displayed.
Folder Name The available folders are listed by Folder
Name.
Enter into Folder To display subfolders, click this button.
Select Select a folder.
High Performance Wireless-N Router
18
Linksys E3200
Chapter 4: Advanced Configuration
Shared Folder > Edit
Use this screen to edit a shared folder.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes. Click Close to exit the
screen.
Delete To delete a shared folder, click this option.
Format Disk
Disk To format a disk and create a new partition, select
the disk you want to format, and then click Format Disk. (If
your disk was formatted with multiple partitions, then the
formatting will delete them and create a single partition.
Format Disk > Claim Disk
Enter a partition’s name Create a name for the partition.
(If your disk was formatted with multiple partitions, then
formatting will delete them and create a single partition.)
To format the disk as FAT32, click Format and follow the
on‑screen instructions. To cancel the formatting, click
Cancel.
Shared Folder
Display Name Create a name for the folder. This will
appear in the Shared Folder table on the Disk screen.
WARNING: Formatting a disk erases all data on
the disk. Be sure to save any files that you want
to keep from the disk onto another computer or
drive before formatting a disk.
Partition The name of the partition is displayed.
Location The location of the current folder is displayed.
New Folder Type in a new folder name if you want to
create a new subfolder in the current location. Then click
Create.
Share entire Partition Select this option if you want
to share the entire partition. If your disk doesn’t have
multiple partitions, selecting this option will share the
entire disk. If you do not want to share the entire partition,
then select the folder you do want to share.
Current Folder The current folder is displayed.
Folder Name The available folders are listed by Folder
Name.
Enter into Folder To display subfolders, click this button.
Select Select a folder.
Return to Upper Folder To go back up a folder level from
a subfolder, click this button.
Format Disk
Storage > FTP Server
The Storage options are available when a USB drive is
connected to the USB port of the Router.
The FTP Server tab creates an FTP server that can be
accessed from the Internet or your local network.
Access
Specify which user groups have read-and-write or readonly access to the folder. (To create user groups, refer to
“Create or Edit a Group Account” on page 22.)
Available Groups To allow a group access to the folder,
select it, and then click the >> button.
Groups with Access To block a group from accessing the
folder, select it, and then click the << button.
High Performance Wireless-N Router
19
Linksys E3200
Chapter 4: Advanced Configuration
Edit To change the access settings of an FTP folder, click
this option, and the FTP Folder screen appears. Proceed to
“Create or Edit an FTP Folder” on page 20.
Delete To delete an FTP folder, click this option.
Create or Edit an FTP Folder
Use this screen to add an FTP folder.
Storage> FTP Server
Setup
Server Name Enter the FTP Server Name, which serves
as a display name only. Use only alphanumeric characters
(letters A to Z and numbers 0 to 9). The default FTP Server
name of the Router is Ciscoxxxxx. XXXXX represents the
last 5 digits of your serial number. This can be found on
the bottom of the router.
NOTE: If you used the setup software for
installation, then the FTP Server name is
synchronized with the name of your wireless
network (up to 15 characters).
FTP Folder Screen
FTP Server Select Enabled to use the Router as an FTP
server. Otherwise, select Disabled. An external USB hard
drive or USB disk must be connected to the USB port to
use this service.
Display Name Create a name for the folder. Enter a
display name that will appear in the Access table of the
FTP Server screen.
Internet Access Select Enabled to allow access of the
FTP server from the Internet. Otherwise, select Disabled
to only allow local network access.
Location The location of the folder is displayed.
Partition The name of the partition is displayed.
FTP Port Enter the FTP Port number to use. The default
is 21.
New Folder Type in a new folder name if you want to
create a new subfolder in the current location. Then click
Create.
Encoding The Router supports different character sets
for the transfer of files in different languages. Select the
appropriate character encoding set: Unicode(UTF-8),
Chinese Simplified(GB18030), Vietnamese(CP1258), or
ISO8859_1. The default is Unicode(UTF-8).
Share entire Partition Select this option if you want to
share the entire partition with your FTP clients. If your disk
doesn’t have multiple partitions, selecting this option will
share the entire disk. If you do not want to share the entire
partition, then select the folder you do want to share.
Access
Current Folder The current folder is displayed.
This section lets you add FTP folders that can be accessed
through the FTP client.
Folder The available folders are listed by Folder name.
Enter into Folder To display subfolders, click this button.
Specify Folder To add an FTP folder to the Access table,
click this button. The FTP Folder screen appears. Proceed
to “Create or Edit an FTP Folder” on page 20.
Select Select a folder.
Summary To view a list of FTP folders, click this option.
Access
For each FTP folder, the Display Name, Partition, and
Folder location are displayed.
The database table lists the FTP folders with the following
information: Display Name, Partition, and Folder.
High Performance Wireless-N Router
Return to Upper Folder To return to the previous folder,
click this button.
Specify which user groups have read-and-write or readonly access to the folder. (To create user groups, refer to
“Create or Edit a Group Account” on page 22.)
20
Linksys E3200
Chapter 4: Advanced Configuration
Available Groups To allow a group access to the folder,
select it, and then click the >> button.
Server Internet IP Address The Internet IP address of
the Router’s FTP server is displayed.
Groups with Access To block a group from accessing the
folder, select it, and then click the << button.
User Management
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes. Click Close to exit the
screen.
By default the Router creates two users, admin and guest.
On the FTP Server screen, click Save Settings to apply your
changes, or click Cancel Changes to clear your changes.
Storage > Administration
The Administration screen allows you to manage the user
groups and individual users who can access the shared
folders.
The users are listed by User Name and Group.
Create New User To create a new user, click this
button. The User Account screen appears. Proceed to
Create or Edit a User Account, page 21.
Edit To change the settings of a user account, click
Edit, and the User Account screen appears. Proceed to
“Create or Edit a User Account” on page 21.
Delete To delete a user, click this button.
Group Management
By default the Router creates two user groups, admin and
guest.
The groups are listed by Group Name and Access level.
There are two levels of access, r & w (read-and-write) and
r (read-only).
Create New Group To create a new group of users, click
this button. The Group Account screen appears. Proceed to
“Create or Edit a Group Account” on page 22.
Edit To change the description or access rights of a group,
click Edit, and the Group Account screen appears. Proceed
to “Create or Edit a Group Account” on page 22.
Delete To delete a group, click this button.
Create or Edit a User Account
Storage > Administration
Information
Device Name The default device name of the Router is
Ciscoxxxxx. XXXXX represents the last 5 digits of your
serial number. This can be found on the bottom of the
router. (The Device name is also the Router’s NetBIOS
name.)
NOTE: If you used the setup software
for installation, then the device name is
synchronized with the name of your wireless
network (up to 15 characters).
User Account
Workgroup Name Enter the workgroup name for the
Router; it should match the workgroup name of the
computers on your local network. The Router’s default is
workgroup.
Server LAN IP Address The local IP address of the
Router’s media and FTP server is displayed.
High Performance Wireless-N Router
21
Linksys E3200
Chapter 4: Advanced Configuration
User Account
Access Restrictions > Internet Access Policy
User Name Create a name for the user.
The Internet Access Policy screen allows you to deny or
allow specific kinds of Internet usage and traffic, such as
Internet access, designated services, and websites during
specific days and times.
Full Name Enter the actual name of the user.
Description Enter keywords to describe the user.
Password Enter the password that the user will use for
login
Confirm Password Enter the password again to confirm.
Group Member Select the appropriate user group.
Account Disabled To temporarily disable an account,
select this option.
Click Save Settings to apply your changes, or click Cancel
to clear your changes. Click Close to exit the screen.
On the Administration screen, click Save Settings to
apply your changes, or click Cancel Changes to clear your
changes.
Create or Edit a Group Account
Group Account
Access Restrictions > Internet Access
Group Account
Group Name Create a name for the group.
Internet Access Policy
Description Enter keywords to describe the group.
Access Policy Access can be managed by a policy. Use
the settings on this screen to establish an access policy
(after Save Settings is clicked). Selecting a policy from
the drop-down menu will display that policy’s settings.
To delete a policy, select that policy’s number and click
Delete This Policy. To view all the policies, click Summary.
Access Select the appropriate level of access, read and
write or read only.
Click Save Settings to apply your changes, or click Cancel
to clear your changes. Click Close to exit the screen.
On the Administration screen, click Save Settings to
apply your changes, or click Cancel Changes to clear your
changes.
Summary
The policies are listed with the following information: No.,
Policy Name, Access, Days, Time, and status (Enabled). To
enable a policy, select Enabled. To delete a policy, click
Delete. Click Save Settings to save your changes, or click
Cancel Changes to clear your changes. To return to the
Internet Access Policy screen, click Close.
Status Policies are disabled by default. To enable a policy,
select the policy number from the drop-down menu, and
select Enabled.
To create a policy, follow steps 1-11. Repeat these steps to
create additional policies, one at a time.
1.	 Select a number from the Access Policy drop-down
menu.
High Performance Wireless-N Router
22
Linksys E3200
Chapter 4: Advanced Configuration
2.	 Enter a Policy Name in the field provided.
3.	 To enable this policy, select Enabled.
4.	 Click Edit List to select which PCs will be affected by the
policy. The List of PCs screen appears. You can select a PC
by MAC address or IP address. You can also enter a range
of IP addresses if you want this policy to affect a group
of PCs. After making your changes, click Save Settings
to apply your changes, or click Cancel Changes to clear
your changes. Then click Close.
11.	Click Save Settings to save the policy’s settings, or
click Cancel Changes to clear the changes.
Applications and Gaming > Single Port
Forwarding
The Single Port Forwarding screen allows you to customize
port services for common applications.
When users send these types of requests to your network via
the Internet, the Router will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers (use the DHCP Reservation feature on the Basic Setup
screen; refer to “DHCP Reservation” on page 6).
List of PCs
5.	 Select the appropriate option, Deny or Allow,
depending on whether you want to block or allow
Internet access for the computers listed on the List of
PCs screen.
6.	 Decide which days and what times you want this
policy to be enforced. Select the individual days during
which the policy will be in effect, or select Everyday.
Then enter a range of hours and minutes during which
the policy will be in effect, or select 24 Hours.
7.	 You can block websites with specific URL addresses.
Enter each URL in a separate Website Blocking by URL
Address field.
8.	 You can also block websites using specific keywords.
Enter each keyword in a separate Website Blocking by
Keyword field.
9.	 You can filter access to various services accessed
over the Internet, such as FTP or telnet. (You
can block up to three applications per policy.)
From the Applications list, select the application you
want to block. Then click the >> button to move it to
the Blocked List. To remove an application from the
Blocked List, select it and click the << button.
10.	If the application you want to block is not listed or you
want to edit a service’s settings, enter the application’s
name in the Application Name field. Enter its range
in the Port Range fields. Select its protocol from the
Protocol drop-down menu. Then click Add.
To modify a service, select it from the Application list.
Change its name, port range, and/or protocol setting.
Then click Modify.
To delete a service, select it from the Application list.
Then click Delete.
High Performance Wireless-N Router
Applications and Gaming > Single Port Forwarding
Single Port Forwarding
Common applications are available for the first five entries.
Application Name Select the appropriate application.
To IP Address Enter the IP address of the server that
should receive these requests.
Enabled For each application, select Enabled to activate
port forwarding.
For additional applications, complete the following fields:
Application Name Enter the name you wish to give the
application. Each name can have up to 12 characters.
External Port Enter the external port number used by
the server or Internet application. Check with the Internet
application documentation for more information.
Internal Port Enter the internal port number used by
the server or Internet application. Check with the Internet
application documentation for more information.
23
Linksys E3200
Protocol Select the protocol(s) used for this application,
TCP, UDP, or Both.
To IP Address For each application, enter the IP address
of the computer that should receive the requests. If you
assigned a static IP address to the computer, then you can
look up its static IP address; refer to “DHCP Reservation”
on page 6.
Enabled For each application, select Enabled to enable
port forwarding.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Applications and Gaming > Port Range
Forwarding
The Port Range Forwarding screen allows you to set up
public services on your network, such as web servers,
ftp servers, e-mail servers, or other specialized Internet
applications. (Specialized Internet applications are any
applications that use Internet access to perform functions
such as videoconferencing or online gaming. Some Internet
applications may not require any forwarding.)
When users send these types of requests to your network via
the Internet, the Router will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers (use the DHCP Reservation feature on the Basic Setup
screen; refer to “DHCP Reservation” on page 6).
If you need to forward all ports to one computer, click the
DMZ tab.
Chapter 4: Advanced Configuration
Port Range Forwarding
To forward a port, enter the information on each line for
the criteria required.
Application Name In this field, enter the name you
wish to give the application. Each name can be up to 12
characters.
Start~End Port Enter the number or range of port(s)
used by the server or Internet application. Check with the
Internet application documentation for more information.
Protocol Select the protocol(s) used for this application,
TCP, UDP, or Both.
To IP Address For each application, enter the IP address
of the computer running the specific application. If you
assigned a static IP address to the computer, then you can
look up its static IP address; refer to “DHCP Reservation”
on page 6.
Enabled Select Enabled to enable port forwarding.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Applications & Gaming > Port Range
Triggering
The Port Range Triggering screen allows the Router to
watch outgoing data for specific port numbers. The IP
address of the computer that sends the matching data is
remembered by the Router, so that when the requested
data returns through the Router, the data is pulled back
to the proper computer by way of IP address and port
mapping rules.
Applications and Gaming > Port Range Triggering
Applications and Gaming > Port Range Forwarding
Port Range Triggering
Application Name Enter the application name of the
trigger.
Triggered Range For each application, enter the starting
and ending port numbers of the triggered port number
range. Check with the Internet application documentation
for the port number(s) needed.
High Performance Wireless-N Router
24
Linksys E3200
Chapter 4: Advanced Configuration
Forwarded Range For each application, enter the
starting and ending port numbers of the forwarded
port number range. Check with the Internet application
documentation for the port number(s) needed.
Enabled Select Enabled to enable port triggering.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Applications and Gaming > DMZ
DHCP Client Table
The DMZ feature allows one network computer to be
exposed to the Internet for use of a special-purpose
service such as Internet gaming or videoconferencing.
DMZ hosting forwards all the ports at the same time to
one PC. The Port Range Forwarding feature is more secure
because it only opens the ports you want to have opened,
while DMZ hosting opens all the ports of one computer,
exposing the computer to the Internet.
The DHCP Client Table lists computers and other devices
that have been assigned IP addresses by the Router. The
list can be sorted by Client Name, Interface, IP Address,
and MAC Address. To select a DHCP client, click Select. To
update the on-screen information, click Refresh. To exit
this screen and return to the DMZ screen, click Close.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Applications and Gaming > QoS
Quality of Service (QoS) is a method that assigns priority
to specific types of network traffic, which often are
demanding, real-time applications, such as gaming,
videoconferencing, video streaming, and Voice over
Internet Protocol (VoIP) telephony. QoS helps to ensure
optimal performance for these types of uses.
Applications and Gaming > DMZ
DMZ
Any computer whose port is being forwarded should have
its DHCP client function disabled and have a new static IP
address assigned to it because its IP address may change
when using the DHCP function.
Enabled/Disabled To disable DMZ hosting, select
Disabled. To expose one PC, select Enabled. Then
configure the following settings:
Source IP Address If you want any IP address to be the
source, select Any IP Address. If you want to specify an IP
address or range of IP addresses as the designated source,
select and complete the IP address range fields.
Destination If you want to specify the DMZ host by IP
address, select IP Address and enter the IP address in
the field provided. If you want to specify the DMZ host
by MAC address, select MAC Address and enter the MAC
address in the field provided. To retrieve this information,
click DHCP Client Table.
High Performance Wireless-N Router
Applications and Gaming > QoS
QoS (Quality of Service)
Wireless
WMM Support Wi-Fi Multimedia (WMM) is a wireless
Quality of Service feature that improves quality for audio,
video, and voice applications by prioritizing wireless
traffic. To use this feature, the wireless client devices in
your network must support Wireless WMM. If you would
like to disable this feature, select Disabled. Otherwise,
keep the default, Enabled.
25
Linksys E3200
No Acknowledgement If you want to disable the
Router’s Acknowledgement feature, so the Router will not
re-send data if an error occurs, select Enabled. Otherwise,
keep the default, Disabled.
Chapter 4: Advanced Configuration
Add a New Application
Internet Access Priority
In this section, you can set the bandwidth priority for a
variety of applications and devices. There are four levels
of priority; High, Medium, Normal, or Low. When you
set priority, do not set all applications to High, because
this will defeat the purpose of allocating the available
bandwidth. If you want to select below normal bandwidth,
select Low. Depending on the application, a few attempts
may be needed to set the appropriate bandwidth priority.
Enabled/Disabled To use the QoS policies you set, select
Enabled. Otherwise, select Disabled.
Upstream Bandwidth
Upstream Bandwidth This option sets the maximum
outgoing bandwidth that applications can use. To allow
the Router to set the maximum, keep the default, Auto.
To specify the maximum, select Manual. Then enter the
appropriate value and select Kbps or Mbps.
Category
Add a New Application
Enter a Name Enter a name for this application.
Port Range Enter the port range that the application will
be using. For example, if you want to allocate bandwidth
for FTP, you can enter 21-21. If you need services for an
application that uses from 1000 to 1250, you enter 10001250 as your settings. You can have up to three ranges
to define for this bandwidth allocation. Port numbers
can range from 1 to 65535. Check your application’s
documentation for details on the service ports used.
Select one of the following categories: Applications,
Online Games, MAC Address, or Voice Device. Proceed
to the instructions for your selection.
Select the protocol TCP or UDP, or select Both.
Summary
Click Apply to save your changes. Your new entry will
appear in the Summary list.
This lists the QoS entries you have created for your
applications and devices. Refer to “Summary” on page 27
for more information.
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low.
Online Games
Applications
Applications Select the appropriate application. If you
select Add a New Application, follow the instructions in
the Add a New Application section.
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low.
Click Apply to save your changes. Your new entry will
appear in the Summary list.
Online Games
Online Games
Games Select the appropriate game. If you select Add a
New Game, follow the instructions in the Add a New Game
section.
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low.
High Performance Wireless-N Router
26
Linksys E3200
Chapter 4: Advanced Configuration
Click Apply to save your changes. Your new entry will
appear in the Summary list.
Voice Device
Add a New Game
Enter a Name Enter any name to indicate the name of
the entry.
Port Range Enter the port range that the game will be
using. You can have up to three ranges to define for this
bandwidth allocation. Port numbers can range from 1 to
65535. Check your application’s documentation for details
on the service ports used.
Select the protocol TCP or UDP, or select Both.
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low.
Click Apply to save your changes. Your new entry will
appear in the Summary list.
Voice Device
Enter a Name Enter a name for your voice device.
MAC Address Enter the MAC address of your voice
device.
MAC Address
Priority Select the appropriate priority:
(Recommended), Medium, Normal, or Low.
High
Click Apply to save your changes. Your new entry will
appear in the Summary list.
Summary
This lists the QoS entries you have created for your
applications and devices.
Priority This column displays the bandwidth priority of
High, Medium, Normal, or Low.
MAC Address
Name This column displays the application, game,
device, or port name.
Enter a Name Enter a name for your device.
Information This column displays the port range or
MAC address entered for your entry. If a pre-configured
application or game was selected, there will be no valid
entry shown in this section.
MAC Address Enter the MAC address of your device.
Remove Click this button to remove an entry.
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low.
Edit Click this button to make changes.
The MAC address of the computer you are using is
displayed.
Click Apply to save your changes. Your new entry will
appear in the Summary list.
High Performance Wireless-N Router
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
27
Linksys E3200
Administration > Management
The Management screen allows the network’s
administrator to manage specific Router functions for
access and security.
Chapter 4: Advanced Configuration
Access via HTTP (HyperText Transport Protocol) is the
communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secure Socket
Layer) to encrypt data transmitted for higher security.
Select HTTP or HTTPS. HTTP is the default.
Remote Upgrade If you want to be able to upgrade
the Router from the Internet (outside the local network),
select Enabled. (You must have the Remote Management
feature enabled as well.) Otherwise, keep the default,
Disabled.
Allowed Remote IP Address If you want to be able to
access the Router from any external IP address, select Any
IP Address. If you want to specify an external IP address or
range of IP addresses, then select the second option and
complete the fields provided.
Remote Management Port Enter the port number that
will be open to outside access. To access the Router, you
will need to enter the Router’s password.
NOTE: When you are in a remote location
and wish to manage the Router, enter
http://xxx.xxx.xxx.xxx:yyyy
or
https://xxx.xxx.xxx.xxx:yyyy,
depending
on whether you use HTTP or HTTPS. Enter the
Router’s specific Internet IP address in place
of xxx.xxx.xxx.xxx, and enter the Remote
Management Port number in place of yyyy.
Administration > Management
Router Password
Router Access
To ensure the Router’s security, you will be asked for your
password when you access the Router’s browser-based
utility. The default is admin.
Router Password Enter a new password for the Router.
Re-enter to confirm Enter the password again to confirm.
Local Management Access
Access via HTTP (HyperText Transport Protocol) is the
communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secure Socket
Layer) to encrypt data transmitted for higher security.
Select HTTP or HTTPS. The default is HTTP.
Access via Wireless If you are using the Router in a public
domain where you are giving wireless access to your
guests, you can disable wireless access to the Router’s
web-based utility. You will only be able to access the utility
via a wired connection if you disable the setting. Keep the
default, Enabled, to allow wireless access to the utility, or
select Disabled to block wireless access to the utility.
Remote Management Access
Remote Management To permit remote access of the
Router from the Internet (outside the local network),
select Enabled. Otherwise, keep the default, Disabled.
High Performance Wireless-N Router
Advanced Features
SIP ALG The Session Initiation Protocol (SIP) Application
Layer Gateway (ALG) feature allows SIP packets, which are
used for Voice over Internet Protocol (VoIP), to traverse
the NAT firewall. For more information, contact your VoIP
service provider.
To use the SIP ALG feature for VoIP service, select Enabled.
If you are not using VoIP service, then keep the default,
Disabled.
If your VoIP service provider uses other NAT traversal
solutions such as Session Traversal Utilities for NAT
(STUN), Traversal Using Relay NAT (TURN), or Interactive
Connectivity Establishment (ICE), then keep the default,
Disabled.
UPnP
Universal Plug and Play (UPnP) allows the appropriate
Windows operating system to automatically configure the
Router for various Internet applications, such as gaming
and videoconferencing.
UPnP If you want to use UPnP, keep the default, Enabled.
Otherwise, select Disabled.
28
Linksys E3200
Chapter 4: Advanced Configuration
Allow Users to Configure Keep the default, Enabled,
if you want to be able to make manual changes to the
Router while using the UPnP feature. Otherwise, select
Disabled.
Logviewer IP Address If your computer uses Logviewer
software, you can enter the fixed IP address of the
computer running the software. The Router will now send
updated logs to that computer.
Allow Users to Disable Internet Access Select Enabled,
if you want to be able to prohibit any and all Internet
connections. Otherwise, keep the default, Disabled.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Backup and Restore
View Log When you wish to view the logs, click this
option.
Backup Configurations To back up the Router’s
configuration settings, click this button and follow the
on‑screen instructions.
Restore Configurations To restore the Router’s
configuration settings, click this button and follow the onscreen instructions. (You must have previously backed up
the Router’s configuration settings.)
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Log > View Log
Log
Administration > Log
••
The Router can keep logs of all traffic for your Internet
connection.
Type Select Incoming Log, Outgoing Log, Security
Log, or DHCP Client Log.
••
 Log The Incoming Log displays a temporary
log of the source IP addresses and destination
port numbers for the incoming Internet traffic. The
Outgoing Log displays a temporary log of the local
IP addresses, destination URLs/IP addresses, and
service/port numbers for the outgoing Internet traffic.
The Security log displays the login information for the
browser-based utility. The DHCP Client Log displays
the local DHCP server status information.
Administration > Log
Log
Click Save the Log to save this information to a file on
your computer’s hard drive. Click Refresh to update
the log. Click Clear to clear all the information that is
displayed.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet.
Log To disable the Log function, select Disabled. To
monitor traffic between the network and the Internet,
keep the default, Enabled. With logging enabled, you can
choose to view temporary logs.
High Performance Wireless-N Router
Administration > Diagnostics
29
Linksys E3200
Chapter 4: Advanced Configuration
Diagnostics
Administration > Factory Defaults
Ping Test
The Factory Defaults screen allows you to restore the
Router’s configuration to its factory default settings.
Ping checks the status of a connection.
IP or URL Address Enter the address of the PC whose
connection you wish to test.
Packet Size Enter the packet size you want to use. The
default is 32 bytes.
Number to Ping Enter the number of times you wish to
test the connection. The default is 5.
Factory Defaults
Restore Factory Defaults To reset the Router’s settings
to the default values, select Restore Factory Defaults.
Any settings you have saved will be lost when the default
settings are restored.
Start Test To run the test, click this button. The Ping
screen shows if the test is successful. Click Close to return
to the Diagnostics screen. Click Stop to stop the test.
Administration > Factory Defaults
Ping
Traceroute Test
Traceroute checks the performance of a connection.
NOTE: Do not restore the factory defaults unless
you are having difficulties with the Router and
have exhausted all other troubleshooting
measures. Once the Router is reset, you will have
to re-enter all of your configuration settings.
IP or URL Address Enter the address of the PC whose
connection you wish to test.
Administration > Firmware Upgrade
Start Test Click to run the test. The Traceroute screen
shows if the test is successful. Click Close to return to the
Diagnostics screen. Click Stop to stop the test.
The Firmware Upgrade screen allows you to upgrade the
Router’s firmware. Do not upgrade the firmware unless
you are experiencing problems with the Router or the new
firmware has a feature you want to use.
Administration > Firmware Upgrade
Traceroute
High Performance Wireless-N Router
NOTE: The Router may lose the settings
you have customized. Before you upgrade
its firmware, write down all of your custom
settings. After you upgrade its firmware, you
will have to re‑enter all of your configuration
settings.
30
Linksys E3200
Chapter 4: Advanced Configuration
Firmware Upgrade
Before upgrading the firmware, download the
Router’s firmware upgrade file from our website at
www.linksys.com/support/E3200.
NOTE: If you used the setup software for
installation, then the name of your wireless
network (up to 15 characters) is the server
name of the Router.
Please Select a File to Upgrade Click Browse and select
the firmware upgrade file.
Host Name The Host Name of the Router is displayed (if it
was entered on the Setup > Basic Setup screen).
Start Upgrade After you have selected the appropriate
file, click this button, and follow the on-screen instructions.
Domain Name The Domain Name of the Router is
displayed (if it was entered on the Setup > Basic Setup
screen).
WARNING: Do not interrupt the upgrade
process. You should not turn off the power or
press the Reset button during the upgrade
process. Doing so may disable the Router.
Status > Router
The Router screen displays information about the Router
and its current settings.
Internet Connection
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen.
For a DHCP connection, select Release IP Address or
Renew IP Address as appropriate to release or renew
a DHCP lease. For a PPPoE or similar connection, select
Connect or Disconnect as appropriate to connect to or
disconnect from the Internet.
Click Refresh to update the on-screen information.
Status > Local Network
The Local Network screen displays information about the
local network.
Status > Router
Router Information
Status > Local Network
Firmware Version The version number of the Router’s
current firmware is displayed.
Local Network
Firmware Verification The unique identifier of the
firmware is displayed.
Local MAC Address The MAC address of the Router’s
local, wired interface is displayed.
Current Time The time set on the Router is displayed.
Router IP Address The Router’s IP address, as it appears
on your local network, is displayed.
Internet MAC Address The Router’s MAC Address, as
seen by your ISP, is displayed.
Server Name The Server Name is the name used for the
USB network storage and FTP functions of the Router. The
default, Ciscoxxxxx, is displayed. XXXXX represents the
last 5 digits of your serial number. This can be found on
the bottom of the router.
High Performance Wireless-N Router
Subnet Mask The Subnet Mask of the Router is displayed.
DHCP Server
DHCP Server The status of the Router’s DHCP server
function is displayed.
31
Linksys E3200
Chapter 4: Advanced Configuration
Start IP Address For the range of IP addresses that can
be used by devices on your local network, the starting IP
address is displayed.
End IP Address For the range of IP addresses that can
be used by devices on your local network, the ending IP
address is displayed.
DHCP Client Table Click this option to view a list of
computers or other devices that are using the Router as
a DHCP server.
5GHz/2.4GHz Wireless Network
MAC Address The MAC address of the Router’s local,
wireless interface is displayed.
Mode The wireless mode used by the network is
displayed.
Network Name (SSID) The name of the wireless network,
which is also called the SSID, is displayed.
Radio Band The Radio Band setting selected on the Basic
Wireless Settings screen is displayed.
Wide Channel The Wide Channel setting selected on the
Basic Wireless Settings screen is displayed.
Standard Channel The Standard Channel setting
selected on the Basic Wireless Settings screen is displayed.
Security The wireless security method used by the
Router is displayed.
DHCP Client Table
SSID Broadcast The status of the SSID Broadcast feature
is displayed.
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router. The list can be sorted by IP Address, MAC
Address, Interface, and Client Name. To remove a
DHCP client, click Delete. To update the on-screen
information, click Refresh. To exit this screen and
return to the Local Network screen, click Close.
Status > Wireless Network
The Wireless Network screen displays the status information
of your 5 GHz and/or 2.4 GHz wireless network(s).
Status > Wireless Network
High Performance Wireless-N Router
32
Linksys E3200
High Performance Wireless-N Router

33
Linksys E3200
Appendix A: Troubleshooting
Appendix A: Troubleshooting
The DSL telephone line does not fit into the Router’s
Internet port.
Your computer cannot connect to the Internet.
The Router does not replace your modem. You still need
your DSL modem in order to use the Router. Connect the
telephone line to the DSL modem, and then insert the
setup CD into your computer. Click Set up your Linksys
Router and follow the on‑screen instructions.
Follow these instructions until your computer can connect
to the Internet:
••
••
Verify that the power adapter is connected to the
Router and to a power outlet. If connected to a power
strip, make sure the power strip is turned on.
Make sure that the Power LED, Internet LED, and
Wireless LED are on. If you have any wired computers
connected to the Router, make sure the appropriate
port LED is lit.
NOTE: The Power LED flashes after the power
adapter is plugged in to the Router. If the light
remains flashing for more than 30 seconds,
it may indicate the Router is not working
properly. For assistance, use a computer or
device with Internet access to refer to our
Linksys E3200 support section on the web,
www.linksys.com/support/E3200
••
Make sure that your DSL or cable modem is connected
to your Router’s Internet port using an Ethernet cable.
••
Reset all of the devices on your network:
1.	 Turn off all of your network computers and
devices, and then unplug the power adapter
from your Router.
2.	 Unplug your modem’s power cord (and coaxial
cable if you have a cable modem), and wait two
minutes.
3.	 Reconnect your modem’s power cord (and
coaxial cable) and wait two more minutes.
4.	 Reconnect the power adapter to the Router, and
then power on all of your network computers
and devices.
The modem does not have an Ethernet port.
The modem is a dial-up modem for traditional dial-up
service. To use the Router, you need a cable/DSL modem
and high-speed Internet connection.
You cannot use the DSL service to connect manually to
the Internet.
After you have installed the Router, it will automatically
connect to your Internet Service Provider (ISP), so you no
longer need to connect manually.
When you double-click the web browser, you are
prompted for a username and password. If you want to
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar
for other browsers):
1.	 Select Tools > Internet Options.
2.	 Click the Connections tab.
3.	 Select Never dial a connection.
4.	 Click OK.
The Router does not have a coaxial port for the cable
connection.
The Router does not replace your modem. You still need
your cable modem in order to use the Router. Connect
your cable connection to the cable modem, and then
insert the setup CD into your computer. Click Set up your
Linksys Router and follow the on‑screen instructions.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same
on both the computer and the Router. If you have enabled
wireless security, then make sure the same security
method and key are used by both the computer and the
Router.
You need to modify the settings on the Router.
Router settings can be modified using the Cisco Connect
software, refer to “How to Access Cisco Connect” on
page 11. To modify the advanced settings, go to Advanced
Settings. Refer to “Advanced Settings” on page 11.
You want to access the browser-based utility from Cisco
Connect.
To enter the browser-based utility from Cisco Connect,
follow these steps:
1.	 Open Cisco Connect.
2.	 On the Main Menu, click Router Settings.
3.	 Click Advanced Settings.
4.	 Write down the username and password that are
displayed. (To help protect your password, you can
copy it to the Clipboard by clicking Copy Password.)
5.	 Click OK.
High Performance Dual-Band N Router
34
Linksys E3200
6.	 Your web browser automatically opens. Enter the
username and password, and then click OK. (If you
copied the password to the Clipboard in step 4, press
Ctrl-V to paste it into the Password field.)
When you try to log into the browser-based utility, your
password does not work.
Appendix A: Troubleshooting
4.	 In the Workgroup Name field, enter the workgroup
name of your computer.
5.	 Click Save Settings.
In Windows XP, you do not see the Router in the My
Network Places screen.
Your wireless security password also serves as the browserbased utility’s login password. To see this password:
In the Network Tasks section, click Show icons for
networked UPnP devices. If the Router does not appear,
follow these instructions:
1.	 Open Cisco Connect.
1.	 Go to Start > Control Panel > Firewall.
2.	 On the Main Menu, click Router Settings.
2.	 Click the Exceptions tab.
3.	 The Password is displayed on the left side of the screen.
3.	 Select UPnP Framework.
The Router does not recognize your USB storage device.
4.	 Click OK.
Make sure the USB storage device uses the NTFS or FAT
format. To check its format, follow these instructions:
In Windows XP, you do not see your USB storage device
in the View workgroup computers screen.
1.	 Connect the USB storage device directly to your
computer.
Make sure the Router and your computer use the same
workgroup name. (The default workgroup name of
the Router is workgroup. In Windows XP, go to Start >
Control Panel > System. Click the Computer Name tab.
The workgroup name is displayed.) If they differ, then
change the workgroup name of the Router. Follow these
instructions:
2.	 On your desktop, double-click Computer or My
Computer icon.
3.	 Right-click the USB storage device, and click
Properties.
4.	 The format is listed in the File system
description. If the format is not NTFS or FAT, then
back up the data on the USB storage device.	
After you have backed up the data on the USB storage
drive, you can format it. Right-click the USB storage
device, and click Format. Follow the on-screen
instructions. For more information, refer to Windows
Help.
If the Router still does not recognize the USB storage
device, then remove the power adapter from the Router’s
Power port. Wait five seconds, and then re-connect the
power adapter to the Router’s Power port.
1.	 Access the web-based utility of the Router. (Refer to
“How to Access the Browser-Based Utility” on page
3.)
2.	 Click the Storage tab.
3.	 Click the Administration tab.
4.	 In the Workgroup Name field, enter the workgroup
name of your computer.
5.	 Click Save Settings.
WEB: If your questions are not addressed here,
refer to our E3200 support section on the web,
www.linksys.com/support/E3200
In Windows Vista, you do not see the USB storage device
in the Network screen.
Make sure the Router and your computer use the same
workgroup name. (The default workgroup name of the
Router is workgroup. In Windows Vista, right-click the
Computer icon and select Properties. Click Advanced
system settings. Click the Computer Name tab. The
workgroup name is displayed.) If they differ, then
change the workgroup name of the Router. Follow these
instructions:
1.	 Access the web-based utility of the Router. (Refer to
“How to Access the Browser-Based Utility” on page
3.)
2.	 Click the Storage tab.
3.	 Click the Administration tab.
High Performance Dual-Band N Router
35
Linksys E3200
Appendix B: How to Install and Access
USB Storage
Overview
The Router’s USB port lets you connect USB storage
that can be accessed over your network. This appendix
covers the main functions of the shared storage feature,
including the following:
••
Connect and access a USB storage device
••
Map a shortcut to a USB storage device
••
Create a shared folder on a USB storage device
(advanced users)
••
Manage access to shared folders using group and user
accounts (advanced users)
Follow the instructions for your operating system,
Windows 7, Windows Vista, Windows XP, or Mac OS X.
Appendix B: How to Install and Access USB Storage
2.	 In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
“Setup > Basic Setup” on page 3.
Enter Local IP Address of Router
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field.
3.	 Double-click the Public folder. (By default the Router
creates a shared folder called Public.)
Windows 7
Install the USB Storage Device
1.	 Make sure your computer has a wired or wireless
connection to the Router.
2.	 Connect an external USB hard disk drive or USB flash
disk to the USB port of the Router.
NOTE: If the USB storage device has
pre‑existing folders, then you will have to
create shared folders so there is network
access to these pre-existing folders. Proceed to
“Create a Shared Folder” on page 46.
Access the USB Storage Device
1.	 On your desktop, click the Windows Explorer icon.
Windows Explorer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
Double-Click Public Folder
NOTE: If the Public folder is not displayed,
right‑click Network. Click Properties. Click
Change advanced sharing settings. Select
Turn on network discovery. Select Turn on
file and printer sharing. Click Save changes.
High Performance Wireless-N Router
36
Linksys E3200
4.	 On the login screen, enter your account user name and
password. (For the admin account, admin is both the
default user name and password.) Click OK.
Appendix B: How to Install and Access USB Storage
3.	 Right-click the folder you want to map, and click Map
Network Drive.
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
Map a Drive
Map Network Drive
4.	 From the Drive drop-down menu, select an available
drive letter.
1.	 On your desktop, click the Windows Explorer icon.
Windows Explorer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
“Setup > Basic Setup” on page 3.
Select Drive Letter
5.	 If the login screen appears, enter your account user
name and password. (For the admin account, admin
is both the default user name and password.) Click OK.
Enter Local IP Address of Router
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field..
High Performance Wireless-N Router
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
37
Linksys E3200
Appendix B: How to Install and Access USB Storage
Windows Vista
6.	 Click Finish.
Install the USB Storage Device
1.	 Make sure your computer has a wired or wireless
connection to the Router.
2.	 Connect an external USB hard disk drive or USB flash
disk to the USB port of the Router.
Access the USB Storage Device
1.	 On your desktop, double-click the Computer icon.
Click Finish
Access Mapped Drive
1.	 On your desktop, click the Windows Explorer icon.
Windows Explorer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 Double-click the mapped drive to access it.
Computer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
“Setup > Basic Setup” on page 3.
Enter Local IP Address of Router
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field.
Double-Click Mapped Drive
High Performance Wireless-N Router
38
Linksys E3200
Appendix B: How to Install and Access USB Storage
3.	 Double-click the Public folder. (By default the Router
creates a shared folder called Public.)
2.	 In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
“Setup > Basic Setup” on page 3.
Enter Local IP Address of Router
Double-Click Public Folder
NOTE: If the USB storage device has
pre‑existing folders, then you will have to
create shared folders so there is network
access to these pre-existing folders. Proceed to
“Create a Shared Folder” on page 46.
4.	 Enter your account user name and password. (For the
admin account, admin is both the default user name
and password.) Click OK.
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field.
3.	 Right-click the folder you want to map, and click Map
Network Drive. (The default shared folder is named
Public.)
NOTE: If the USB storage device has
pre‑existing folders, then you will have to
create shared folders so there is network
access to these pre-existing folders. Proceed to
“Create a Shared Folder” on page 46.
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
Map a Drive
Map Network Drive
1.	 On your desktop, double-click the Network icon.
Network Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
High Performance Wireless-N Router
39
Linksys E3200
Appendix B: How to Install and Access USB Storage
4.	 From the Drive drop-down menu, select an available
drive letter.
Access Mapped Drive
1.	 On your desktop, double-click the Computer icon.
Computer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 Double-click the mapped drive to access it.
Select Drive Letter
5.	 If the login screen appears, enter your account user
name and password. (For the admin account, admin
is both the default user name and password.) Click OK.
Double-Click Mapped Drive
Windows XP
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
6.	 Click Finish.
Install the USB Storage Device
1.	 Make sure your computer has a wired or wireless
connection to the Router.
2.	 Connect an external USB hard disk drive or USB flash
disk to the USB port of the Router.
Click Finish
High Performance Wireless-N Router
40
Linksys E3200
Appendix B: How to Install and Access USB Storage
Access the USB Storage Device
1.	 On your desktop, double-click the My Computer icon.
4.	 Enter your account user name and password. (For the
admin account, admin is both the default user name
and password.) Click OK.
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
“Setup > Basic Setup” on page 3.
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
Map a Drive
1.	 On your desktop, double-click the My Computer icon.
Enter Local IP Address of Router
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field.
3.	 Double-click the Public folder. (By default the Router
creates a shared folder called Public.)
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
“Setup > Basic Setup” on page 3.
Enter Local IP Address of Router
Double-Click Public Folder
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field..
NOTE: If the USB storage device has
pre‑existing folders, then you will have to
create shared folders so there is network
access to these pre-existing folders. Proceed to
“Create a Shared Folder” on page 46.
High Performance Wireless-N Router
41
Linksys E3200
Appendix B: How to Install and Access USB Storage
3.	 Right-click the folder you want to map, and click Map
Network Drive.
6.	 Click Finish.
Click Finish
Map Network Drive
4.	 From the Drive drop-down menu, select an available
drive letter.
Select Drive Letter
5.	 If the login screen appears, enter your account user
name and password. (For the admin account, admin
is both the default user name and password.) Click OK.
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
High Performance Wireless-N Router
42
Linksys E3200
Appendix B: How to Install and Access USB Storage
Access Mapped Drive
Mac OS X
1.	 On your desktop, double-click the My Computer icon.
Install the USB Storage Device
1.	 Make sure your computer has a wired or wireless
connection to the Router.
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2.	 Connect an external USB hard disk drive or USB flash
disk to the USB port of the Router.
Access the USB Storage Device
1.	 From your desktop select Go > Network.
2.	 Double-click the mapped drive to access it.
2.	 Double-click the server name.
Double-Click Mapped Drive
High Performance Wireless-N Router
NOTE: If you used the setup software
to install your Router, then the name
of your wireless network will be the
server name (up to 15 characters). If not,
the name will appear as Ciscoxxxxx (xxxxx
represents the last five digits of the Router’s
serial number.)
43
Linksys E3200
Appendix B: How to Install and Access USB Storage
3.	 Click Connect As.
6.	 The selected folder will open. If the user name that you
logged in with is in the admin group you can read/
write to the folder. If the user name is a member of the
guest group you will only have read access.
Connect As button
4.	 Enter your name and password. (For the admin
account, admin is both the default user name and
password.) Click OK.
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
Display Shared Folder on the Desktop
1.	 Go to Finder > Preferences.
User accounts are set up on the Storage >
Administration screen; for more information, refer to
“Storage > Administration” on page 21.
5.	 The window should display Connected as: admin (or
whatever name you’ve connected with). The folders
that you have permission to view will be displayed.
Double-click a folder such as Public to open it.
High Performance Wireless-N Router
2.	 Check Connected Servers.
Connected Servers
44
Linksys E3200
3.	 The shared folder will be displayed on the desktop and
you can access it by double-clicking on the icon.
Appendix B: How to Install and Access USB Storage
3.	 Select Login Items.
Add to Startup Login Items
1.	 Go to the Apple menu and select System Preferences.
4.	 Drag the shared folder to the Login Items window.
2.	 Click Accounts.
5.	 The folder will appear in the list of Login Items. Click
the red x to close the window.
High Performance Wireless-N Router
45
Linksys E3200
Appendix B: How to Install and Access USB Storage
Advanced Configuration
(Advanced Users Only)
3.	 To create a shared folder, click Create Share.
To manage access to the USB storage device, you can
create shared folders, user groups, and user accounts.
Access the Browser-Based Utility
To access the browser-based utility, launch the web
browser on your computer, and enter the Router’s default
IP address, 192.168.1.1, in the Address field. Then press
Enter.
A login screen will appear. (Non-Windows 7 users will see
a similar screen.) In the User name field, enter admin. Then
enter the password created during the Setup Software.
(If you did not run the Setup Software, then use the
default password, admin. You can set a new password
on the Administration > Management screen. Refer to
“Administration > Management” on page 28.) Click OK
to continue.
Shared Folder
4.	 In the Display Name field, create a display name for the
shared folder.
5.	 In the New Folder field, create a name for the physical
location of the shared folder. Then click Create.
6.	 If the shared folder should include the entire partition,
select Share entire Partition and proceed to step 8.
If you do not want to share the entire partition, then
specify the folder you do want to share.
Login Screen
Create a Shared Folder
1.	 Click the Storage tab.
2.	 Click the Disk tab.
7.	 Select the appropriate folder. To display subfolders,
click Enter into Folder. To return to the previous
folder, click Return to Upper Folder.
8.	 To allow a group access to the shared folder, select it
from the Available Groups column, and then click the
>> button.
NOTE: Specify which user groups have readand-write or read-only access to the shared
folders.
9.	 To block a group from accessing the shared folder,
select it from the Groups with Access column, and
then click the << button.
10.	Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Disk screen.
Storage > Disk
High Performance Wireless-N Router
46
Linksys E3200
Appendix B: How to Install and Access USB Storage
Create a User Group Account
Create a User Account
1.	 Click the Storage tab.
1.	 Click the Storage tab.
2.	 Click the Administration tab.
2.	 Click the Administration tab.
Storage > Administration
Storage > Administration
3.	 In the Group Management section, click Create New
Group.
3.	 In the User Management section, click Create New
User.
Group Account
4.	 In the Group Name field, create a name for the group.
5.	 In the Description field, enter keywords to describe the
group.
6.	 From the Access drop-down menu, select the
appropriate level of access, read and write or read
only.
7.	 Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Administration screen.
User Account
4.	 In the User Name field, create a name for the user.
5.	 In the Full Name field, enter the actual name of the
user.
6.	 In the Description field, enter keywords to describe the
user.
7.	 In the Password and Confirm Password fields, enter the
password that the user will use for login.
8.	 From the Group Member drop-down menu, select the
appropriate user group.
NOTE: To temporarily disable an account, select
Account Disabled.
9.	 Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Administration screen.
High Performance Wireless-N Router
47
Linksys E3200
Appendix C: Specifications
Appendix C: Specifications
Environmental
Dimensions
6.69" x 0.98" x 7.48"
(170 x 25 x 190 mm)
High Performance Dual-Band N
Router
Unit Weight
7.62 oz (216 g)
Power
12V, 2A
Model Number
E3200
Certifications
FCC, IC, CE, Wi-Fi A/B/G/N
# of Antennas
6 total, 3 internal antennas per
each 2.4 GHz & 5 GHz radio band
Operating Temp.	
32 to 104°F (0 to 40°C)
Detachable (y/n)
No				
Storage Temp.	
-4 to 140°F (-20 to 60°C)
Switch Port Speed
10/100/1000 Mbps
Ports
Internet
Ethernet (1-4)
USB
Power
Model Name
Linksys E3200
Description
Buttons
Reset
Wi-Fi Protected Setup
LEDs
Power
Ethernet (1-4)
Modulation
802.11b: CCK, QPSK, BPSK
802.11g: OFDM
802.11a: OFDM
802.11n: BPSK, QPSK, 16-QAM,
64-QAM
Receive Sensitivity
2.4 GHz
802.11b: -87 dBm @ 11 Mbps
(Typical)
802.11g: -77 dBm @ 54 Mbps
(Typical)
802.11n (20 MHz): -71 dBm
@ MCS15 (Typical)
802.11n (40 MHz): -68 dBm
@ MCS15 (Typical)
Operating Humidity 10 to 80% Relative Humidity and
Noncondensing
Storage Humidity
5 to 90% Noncondensing
Specifications are subject to change without notice.
5 GHz
802.11a: -75 dBm @ 54 Mbps
(Typical)
802.11n 20 MHz: -70 dBm @ MCS15
(Typical)
802.11n 40 MHz: -67 dBm @ MCS15
(Typical)
Antenna Gain
2.4 GHz (Dipole Antennas)
Antenna 1 ≤ 3 dBi
Antenna 2 ≤ 4 dBi
Antenna 3 ≤ 4 dBi
5 GHz (Dipole Antennas)
Antenna 1 ≤ 4.5 dBi
Antenna 2 ≤ 4.5 dBi
Antenna 3 ≤ 4.5 dBi
UPnP
Supported
Security features
WEP, WPA, WPA2		
Security key bits
Up to 128-bit encryption
Storage File
System Support
FAT, and NTFS, and HFS+
11020112C-JL
High Performance Dual-Band N Router
48
Linksys E3200
Appendix C: Specifications
Federal Communication Commission Interference
Appendix C: Specifications
Statement
Model Name
This equipment
has been Linksys
tested E3200
and found to comply with
the limits
for a Class B digital
pursuant
to PartN15 of
Description
Highdevice,
Performance
Dual-Band
the FCC Rules. These Router
limits are designed to provide
reasonable
against
Modelprotection
Number
E3200 harmful interference in a
residential installation. This equipment generates, uses and
# of Antennas
3 internal
per and
can radiate
radio frequency6 total,
energy
and, if antennas
not installed
each
2.4
GHz
GHz
radio
used in accordance with the instructions, may cause band
harmful
Detachable
(y/n)
No				
interference
to radio
communications.
However, there is no
guarantee
that
will not occur
Switch
Portinterference
Speed 10/100/1000
Mbps in a particular
installation.
If this equipment does cause harmful
Ports to radio or television
Internet reception, which can be
interference
Ethernet (1-4)
determined by turning the equipment
off and on, the user is
USBthe interference by one of the
encouraged to try to correct
Power
following measures:
Buttons
Reset
Wi-Fi Protected
Setup
- Reorient or relocate the receiving
antenna.
- Increase
the
separation
between
the
equipment and
LEDs
Power
receiver.
Ethernet (1-4)
- Connect the equipment into an outlet on a circuit different
Modulation
802.11b: CCK, QPSK, BPSK
from that
802.11g: OFDM
to which the receiver is connected.
802.11a: OFDM
- Consult the dealer or an experienced radio/TV technician
802.11n: BPSK, QPSK, 16-QAM,
for help.
64-QAM
Receive Sensitivity
2.4or
GHz
FCC Caution:
Any changes
modifications not expressly
802.11b:
-87compliance
dBm @ 11 Mbps
approved by the party responsible for
could void
(Typical)
the user's authority to operate this equipment.
802.11g: -77 dBm @ 54 Mbps
For operation within 5.15 ~ (Typical)
5.25GHz and 5.47~ 5.725GHz
802.11n
(20 MHz):
-71 dBm
frequency range, it is restricted
to indoor
environment.
@ MCS15 (Typical)
802.11n
-68 dBm
This device complies with
Part (40
15 MHz):
of the
FCC Rules.
MCS15
(Typical)
Operation is subject to the following two conditions: (1) This
device may not cause harmful
5 GHz interference, and (2) this
device must accept any 802.11a:
interference
received,
including
-75 dBm
@ 54 Mbps
interference that may cause(Typical)
undesired operation.
802.11n 20 MHz: -70 dBm @ MCS15
IMPORTANT NOTE:
(Typical)
Radiation Exposure Statement:
802.11n 40 MHz: -67 dBm @ MCS15
This equipment complies with
FCC radiation exposure limits
(Typical)
set forth
for
an
uncontrolled
environment.
This equipment
Antenna Gain
2.4 GHz (Dipole Antennas)
should be installed and operated
with
minimum
distance
Antenna 1 ≤ 3 dBi
20cm between the radiator Antenna
& your body.
2 ≤ 4 dBi
Industry Canada statement:
Environmental
This
device complies with
the Industry Canada Rules.
Dimensions
6.69"RSS-210
x 0.98" x of
7.48"
Operation is subject to the following two conditions: (1) This device
(170 x 25 x 190 mm)
may not cause harmful interference, and (2) this device must accept
Unitinterference
Weight
7.62 oz
(216 g) interference that may cause
any
received,
including
undesired
operation.
Power
12V, 2A
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada
Certifications
IC,exempts
CE, Wi-FideA/B/G/N
applicable
aux appareilsFCC,
radio
licence. Son
fonctionnement
est
sujet
aux
deux
conditions
Operating Temp.	
32 to 104°F (0 to 40°C)suivantes: (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
Storage doit
Temp.	
-4 tobrouillage
140°F (-20
to 60°C)
dispositif
accepter tout
reçu,
y compris un brouillage
susceptible
de
provoquer
un
fonctionnement
indésirable.
Operating Humidity 10 to 80% Relative Humidity
and
Noncondensing
IMPORTANT NOTE:
Storage Humidity
5 to 90% Noncondensing
Radiation
Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
Specifications are subject to change without notice.
operated with minimum distance 20cm between the radiator & your
body.
Caution:
(i) the device for operation in the band 5150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to LE-LAN
devices.
NOTE IMPORTANTE:
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont
réservés uniquement pour une utilisation à l'intérieur afin de réduire
les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux;
(ii) De plus, les utilisateurs devraient aussi être avisés que les
utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5 250-5 350
MHz et 5 650-5 850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL
Antenna 3 ≤ 4 dBi
This transmitter must not be co-located or operating in
5 GHz (Dipole
Antennas)
conjunction with any other antenna
or transmitter.
Antenna 1 ≤ 4.5 dBi
Antenna 2 ≤ 4.5 dBi
Antenna 3 ≤ 4.5 dBi
UPnP
Supported
Security features
WEP, WPA, WPA2		
Security key bits
Up to 128-bit encryption
Storage File
System Support
FAT, and NTFS, and HFS+
11020112C-JL
High Performance Dual-Band N Router
48
www.linksys.com/support
Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and certain other countries. All other
trademarks mentioned in this document or website are the property of their respective owners.
© 2011 Cisco. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : Linksys E3000 User Guide
Creator                         : Cisco
Create Date                     : 2011:02:02 13:21:01-06:00
Metadata Date                   : 2011:03:31 10:38:51+08:00
Modify Date                     : 2011:03:31 10:38:51+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7958 bytes, use -b option to extract)
Instance ID                     : uuid:dd244b36-2af6-4d9c-b2b2-a278004875b1
Original Document ID            : xmp.did:521786E7AB2EDE11B3A6F2B7C1B3250F
Document ID                     : xmp.did:7630F7A221206811B1A4A7C3EA219CFB
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:521786E7AB2EDE11B3A6F2B7C1B3250F, xmp.iid:531786E7AB2EDE11B3A6F2B7C1B3250F, xmp.iid:541786E7AB2EDE11B3A6F2B7C1B3250F, xmp.iid:551786E7AB2EDE11B3A6F2B7C1B3250F, xmp.iid:561786E7AB2EDE11B3A6F2B7C1B3250F, xmp.iid:29668E7EB12EDE11B3A6F2B7C1B3250F, xmp.iid:74E7BC3FC12EDE11B3A6F2B7C1B3250F, xmp.iid:75E7BC3FC12EDE11B3A6F2B7C1B3250F, xmp.iid:B9273F54DD60DE11B13CF0898261F791, xmp.iid:BA273F54DD60DE11B13CF0898261F791, xmp.iid:8DB26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:8EB26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:8FB26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:90B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:91B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:92B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:93B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:94B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:95B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:96B26ACFCD74DE11BD32A2B9CAE1C0DC, xmp.iid:4BD24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:4CD24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:4DD24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:4ED24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:4FD24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:50D24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:51D24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:52D24C80D474DE11BD32A2B9CAE1C0DC, xmp.iid:2B5B71545D75DE118F59B3361E101A93, xmp.iid:2C5B71545D75DE118F59B3361E101A93, xmp.iid:2D5B71545D75DE118F59B3361E101A93, xmp.iid:2E5B71545D75DE118F59B3361E101A93, xmp.iid:17980FB01CAADE11A3E3B1084795E562, xmp.iid:18980FB01CAADE11A3E3B1084795E562, xmp.iid:F1CDA1914EACDE11B28AA608CD50938E, xmp.iid:8D59C64379CDDE11A7FD805103D0C7C1, xmp.iid:92CD2D727ECDDE11A7FD805103D0C7C1, xmp.iid:95CD2D727ECDDE11A7FD805103D0C7C1, xmp.iid:62F7FC2DEFD2DE11BAF9CD9BF64BAF4D, xmp.iid:63F7FC2DEFD2DE11BAF9CD9BF64BAF4D, xmp.iid:65F7FC2DEFD2DE11BAF9CD9BF64BAF4D, xmp.iid:66F7FC2DEFD2DE11BAF9CD9BF64BAF4D, xmp.iid:67F7FC2DEFD2DE11BAF9CD9BF64BAF4D, xmp.iid:68F7FC2DEFD2DE11BAF9CD9BF64BAF4D, xmp.iid:49DCED7C8BD4DE118EB4CDB0E9CF6288, xmp.iid:4ADCED7C8BD4DE118EB4CDB0E9CF6288, xmp.iid:4FD3C65401D6DE1186C2BD8FDA215704, xmp.iid:B516251A2CE4DE11B38789FE42E75E77, xmp.iid:18E79EA68DFCDE11B4E0DE377A6422C1, xmp.iid:19E79EA68DFCDE11B4E0DE377A6422C1, xmp.iid:9FE9F11F7D00DF11A73EEBD1F58C9AFE, xmp.iid:8A793B8AF606DF11A2158D84B604AB77, xmp.iid:8B793B8AF606DF11A2158D84B604AB77, xmp.iid:38C80DADF806DF11A2158D84B604AB77, xmp.iid:8F0E0F66231BDF11BB0ACB3F881C1ED5, xmp.iid:900E0F66231BDF11BB0ACB3F881C1ED5, xmp.iid:8959866B9D2BDF11AFC4B7D30644F41F, xmp.iid:03AECFE7032EDF1197A8F037F90902BF, xmp.iid:04AECFE7032EDF1197A8F037F90902BF, xmp.iid:80FC37B67430DF11BA2BE610247BD4F0, xmp.iid:81FC37B67430DF11BA2BE610247BD4F0, xmp.iid:6A4CF1A54731DF11ACB0B0E251F18ADB, xmp.iid:F19706E24C31DF11ACB0B0E251F18ADB, xmp.iid:0A4D85370136DF118FBDE851228F3F7E, xmp.iid:0B4D85370136DF118FBDE851228F3F7E, xmp.iid:C457B0D3603BDF1186F7A447D25A3A0D, xmp.iid:C557B0D3603BDF1186F7A447D25A3A0D, xmp.iid:6D5A24C54047DF11B70AB0E490ECAE7B, xmp.iid:6E5A24C54047DF11B70AB0E490ECAE7B, xmp.iid:68D5E02B1D206811B1A4A7C3EA219CFB, xmp.iid:7630F7A221206811B1A4A7C3EA219CFB, xmp.iid:A8B68DFB3A19E011BB52B0BEECE20978, xmp.iid:8110DFAF4B2BE011B109FCD4C174429C
History When                    : 2009:04:21 12:45:23-07:00, 2009:04:21 12:46:08-07:00, 2009:04:21 12:46:08-07:00, 2009:04:21 13:08:28-07:00, 2009:04:21 13:14:54-07:00, 2009:04:21 13:17:53-07:00, 2009:04:21 15:10:40-07:00, 2009:04:21 15:16:08-07:00, 2009:06:24 11:02:36-07:00, 2009:06:24 11:02:36-07:00, 2009:07:19 18:36:56-07:00, 2009:07:19 18:36:56-07:00, 2009:07:19 18:42:59-07:00, 2009:07:19 18:46-07:00, 2009:07:19 19:05:35-07:00, 2009:07:19 19:06:28-07:00, 2009:07:19 19:08:45-07:00, 2009:07:19 19:10:52-07:00, 2009:07:19 19:14:37-07:00, 2009:07:19 19:18:43-07:00, 2009:07:19 19:24:50-07:00, 2009:07:19 19:27:50-07:00, 2009:07:19 19:27:50-07:00, 2009:07:19 19:28:02-07:00, 2009:07:19 19:28:21-07:00, 2009:07:19 19:34:42-07:00, 2009:07:19 19:34:42-07:00, 2009:07:19 19:40:05-07:00, 2009:07:20 11:44:17-07:00, 2009:07:20 11:44:17-07:00, 2009:07:20 11:45:06-07:00, 2009:07:20 11:45:06-07:00, 2009:09:25 17:14:46-07:00, 2009:09:25 17:14:46-07:00, 2009:09:28 09:47:11-07:00, 2009:11:09 14:23:03-08:00, 2009:11:09 14:23:03-08:00, 2009:11:09 14:23:55-08:00, 2009:11:16 12:32:37-08:00, 2009:11:16 12:33:24-08:00, 2009:11:16 13:34:07-08:00, 2009:11:16 13:41:30-08:00, 2009:11:16 13:51:08-08:00, 2009:11:16 14:19:02-08:00, 2009:11:18 18:07:15-08:00, 2009:11:18 18:16:42-08:00, 2009:11:20 10:20:07-08:00, 2009:12:08 11:01:33-08:00, 2010:01:08 11:53-08:00, 2010:01:08 11:53:23-08:00, 2010:01:13 13:07:36-08:00, 2010:01:21 17:48:05-08:00, 2010:01:21 17:48:06-08:00, 2010:01:21 17:53:56-08:00, 2010:02:16 09:47:49-08:00, 2010:02:16 09:47:49-08:00, 2010:03:09 09:01:35-08:00, 2010:03:12 10:21:50-08:00, 2010:03:12 10:21:50-08:00, 2010:03:15 13:53:29-07:00, 2010:03:15 13:53:37-07:00, 2010:03:16 15:40:12-07:00, 2010:03:16 15:40:12-07:00, 2010:03:22 15:21:09-07:00, 2010:03:22 15:21:09-07:00, 2010:03:29 11:28:09-07:00, 2010:03:29 11:28:09-07:00, 2010:04:13 15:54:13-07:00, 2010:04:13 15:54:13-07:00, 2010:05:19 13:51:39-07:00, 2010:05:19 13:51:39-07:00, 2011:01:05 20:16:34-06:00, 2011:01:28 20:01:54-06:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /, /, /metadata, /metadata, /;/metadata, /, /metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /, /metadata, /, /metadata, /, /metadata, /, /metadata, /, /metadata, /, /, /
Derived From Instance ID        : xmp.iid:68D5E02B1D206811B1A4A7C3EA219CFB
Derived From Document ID        : xmp.did:6E5A24C54047DF11B70AB0E490ECAE7B
Derived From Original Document ID: xmp.did:521786E7AB2EDE11B3A6F2B7C1B3250F
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:5E505252CD74DE1195DEDAE1F9B44DCE, uuid:744c5659-46ac-4d66-9839-30259431ad2e, uuid:744c5659-46ac-4d66-9839-30259431ad2e, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:E92C8517E5E8DE11BC35EFABBC7C8C0A, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:0ec05d74-5b56-11d8-bec8-b7a4617a9a48, uuid:13769FE7F705DD11AF0DDB93C01F491A, uuid:24DC4FD8F705DD11AF0DDB93C01F491A, uuid:8183679F73B2DD119F30FC3CC91694BB, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:D8242CF0F705DD11AF0DDB93C01F491A, uuid:D4242CF0F705DD11AF0DDB93C01F491A, uuid:15769FE7F705DD11AF0DDB93C01F491A, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:219E51477D37DF118EB1A3905013DB56, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:19769FE7F705DD11AF0DDB93C01F491A, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:8683679F73B2DD119F30FC3CC91694BB, xmp.iid:229E51477D37DF118EB1A3905013DB56, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:ab7964b9-d925-4c39-aee7-587f612c289b, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:8c29b18b-e60e-4d53-a073-3d133b4a1b87, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:8c29b18b-e60e-4d53-a073-3d133b4a1b87, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:2f88acdd-617c-427a-9108-15f7271ed2a0, xmp.iid:06AEE3FE86EEDE11A24BEE3C0CDB983E, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:F68C7FBF6CD5DE119A4CB31C08CB3F9C, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:417A78643BD5DE11B76EB2D28D39D5B8, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:42B6C7F33BD5DE11B76EB2D28D39D5B8, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:CD7E170420E1DE1189FFCE5A6A387F81, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:133EB2DE3CD5DE11B76EB2D28D39D5B8, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:2f88acdd-617c-427a-9108-15f7271ed2a0, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:D80F218E23E1DE1189FFCE5A6A387F81, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:9da639e1-9017-4020-8617-fee87680f534, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:68A357333FE0DE11828AE7FFD0E45144, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:69DDE30F39E4DE1185BBA7DED1C0ED35, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:6DB6A6A541E0DE11828AE7FFD0E45144, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:A6DD6EF95CE0DE11828AE7FFD0E45144, uuid:68A357333FE0DE11828AE7FFD0E45144, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:69DDE30F39E4DE1185BBA7DED1C0ED35, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:71B6A6A541E0DE11828AE7FFD0E45144, uuid:20038FCC41E0DE11828AE7FFD0E45144, uuid:A1DD6EF95CE0DE11828AE7FFD0E45144, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:20038FCC41E0DE11828AE7FFD0E45144, uuid:68A357333FE0DE11828AE7FFD0E45144, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:EA801C5143E0DE11828AE7FFD0E45144, uuid:536B96B805F3DD11B07EBEE629698EEC, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:63DDE30F39E4DE1185BBA7DED1C0ED35, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:DCD59A091806DF11B3ECDC17FE428A9F, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:6133EACD1255DE11966ADD49D9F5348A, uuid:C701900206F3DD11B07EBEE629698EEC, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:63DDE30F39E4DE1185BBA7DED1C0ED35, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:DBD59A091806DF11B3ECDC17FE428A9F, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:D9D59A091806DF11B3ECDC17FE428A9F, xmp.iid:9C37A3F90D06DF11B3ECDC17FE428A9F, xmp.iid:D9D59A091806DF11B3ECDC17FE428A9F, uuid:536B96B805F3DD11B07EBEE629698EEC, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:DAD59A091806DF11B3ECDC17FE428A9F, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:076B72FEFEF2DD11B07EBEE629698EEC, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:66DDE30F39E4DE1185BBA7DED1C0ED35, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:DDD59A091806DF11B3ECDC17FE428A9F, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:9937A3F90D06DF11B3ECDC17FE428A9F, uuid:076B72FEFEF2DD11B07EBEE629698EEC, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:66DDE30F39E4DE1185BBA7DED1C0ED35, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:DFD59A091806DF11B3ECDC17FE428A9F, xmp.iid:9637A3F90D06DF11B3ECDC17FE428A9F, xmp.iid:9937A3F90D06DF11B3ECDC17FE428A9F, xmp.iid:9637A3F90D06DF11B3ECDC17FE428A9F, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:076B72FEFEF2DD11B07EBEE629698EEC, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:DED59A091806DF11B3ECDC17FE428A9F, xmp.iid:5C341B652BE5DE118ED3D44ADE577850, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:5D341B652BE5DE118ED3D44ADE577850, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:5E341B652BE5DE118ED3D44ADE577850, xmp.iid:6310119835E5DE118ED3D44ADE577850, xmp.iid:6410119835E5DE118ED3D44ADE577850, xmp.iid:6510119835E5DE118ED3D44ADE577850, xmp.iid:4DD237DC1DE5DE118ED3D44ADE577850, xmp.iid:4FD237DC1DE5DE118ED3D44ADE577850, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:51D237DC1DE5DE118ED3D44ADE577850, xmp.iid:53D237DC1DE5DE118ED3D44ADE577850, xmp.iid:55D237DC1DE5DE118ED3D44ADE577850, xmp.iid:55341B652BE5DE118ED3D44ADE577850, xmp.iid:59341B652BE5DE118ED3D44ADE577850, xmp.iid:5B341B652BE5DE118ED3D44ADE577850, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:CB5135D75CE0DE11828AE7FFD0E45144, xmp.iid:CD39CDC7A4D4DE11BCCE9EA5C3D5DFA9, xmp.iid:4750638365D5DE119A4CB31C08CB3F9C, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, xmp.iid:CA8BF659A6D4DE11BCCE9EA5C3D5DFA9, xmp.iid:15B3A55FA7D4DE11BCCE9EA5C3D5DFA9, xmp.iid:CA8BF659A6D4DE11BCCE9EA5C3D5DFA9, xmp.iid:3F7A78643BD5DE11B76EB2D28D39D5B8, uuid:720a9d92-6699-4f10-addd-c1a036fead8a, xmp.iid:3652D5C75B25DE119314F48FA4F7F403, uuid:8e8e44ee-c767-436a-a814-a4c571370cec
Manifest Reference Document ID  : uuid:E021953FAAEDDD11A859EA196301F15A, xmp.did:088506FCD722DE118D10C66869576A0C, xmp.did:088506FCD722DE118D10C66869576A0C, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:5E95149049CEDE11BC56995ECDD35229, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, adobe:docid:photoshop:0ec05d71-5b56-11d8-bec8-b7a4617a9a48, uuid:6D629310F505DD11AF0DDB93C01F491A, uuid:70629310F505DD11AF0DDB93C01F491A, uuid:2CEE46ACF605DD11AF0DDB93C01F491A, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:2FEE46ACF605DD11AF0DDB93C01F491A, uuid:32EE46ACF605DD11AF0DDB93C01F491A, uuid:B3864087F141DC118C52A969A8BE2C65, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:219E51477D37DF118EB1A3905013DB56, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:EE34C0090542DC118C52A969A8BE2C65, uuid:714CEDD50018DE119C7AF18FF295A02E, adobe:docid:photoshop:0ec7e632-5b5e-11d8-a7a8-ef8d539c07b1, xmp.did:229E51477D37DF118EB1A3905013DB56, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:1D99792BB6DEDE11BF57AFAC3B4DA525, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:872B750B9B16DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:872B750B9B16DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:872B750B9B16DB119752CE0FD4DE5706, xmp.did:D4D54F9D68D5DE119A4CB31C08CB3F9C, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:D8D54F9D68D5DE119A4CB31C08CB3F9C, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:407A78643BD5DE11B76EB2D28D39D5B8, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:41B6C7F33BD5DE11B76EB2D28D39D5B8, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:38FA0C7C33D9DE1187B3E262F98982F6, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:123EB2DE3CD5DE11B76EB2D28D39D5B8, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:872B750B9B16DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:8FF2F90099D8DE11808988744AFC3DF8, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:C1630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:64A357333FE0DE11828AE7FFD0E45144, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:67DDE30F39E4DE1185BBA7DED1C0ED35, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:CAC3980841E0DE11828AE7FFD0E45144, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:420B56AA40E0DE11828AE7FFD0E45144, uuid:64A357333FE0DE11828AE7FFD0E45144, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:67DDE30F39E4DE1185BBA7DED1C0ED35, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:70B6A6A541E0DE11828AE7FFD0E45144, uuid:19038FCC41E0DE11828AE7FFD0E45144, uuid:2D769E0C42E0DE11828AE7FFD0E45144, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:19038FCC41E0DE11828AE7FFD0E45144, uuid:64A357333FE0DE11828AE7FFD0E45144, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:FC9FDBC142E0DE11828AE7FFD0E45144, uuid:4F6B96B805F3DD11B07EBEE629698EEC, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:61DDE30F39E4DE1185BBA7DED1C0ED35, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:D7D59A091806DF11B3ECDC17FE428A9F, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:0A7A7BAC06F3DD11B07EBEE629698EEC, uuid:C301900206F3DD11B07EBEE629698EEC, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:61DDE30F39E4DE1185BBA7DED1C0ED35, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:D8D59A091806DF11B3ECDC17FE428A9F, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:D9D59A091806DF11B3ECDC17FE428A9F, xmp.did:9C37A3F90D06DF11B3ECDC17FE428A9F, xmp.did:D9D59A091806DF11B3ECDC17FE428A9F, uuid:4F6B96B805F3DD11B07EBEE629698EEC, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:D6D59A091806DF11B3ECDC17FE428A9F, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:8683D952FEF2DD11B07EBEE629698EEC, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:64DDE30F39E4DE1185BBA7DED1C0ED35, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:2CE930A50D06DF11B3ECDC17FE428A9F, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:30E930A50D06DF11B3ECDC17FE428A9F, uuid:8683D952FEF2DD11B07EBEE629698EEC, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:64DDE30F39E4DE1185BBA7DED1C0ED35, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:32E930A50D06DF11B3ECDC17FE428A9F, xmp.did:34E930A50D06DF11B3ECDC17FE428A9F, xmp.did:30E930A50D06DF11B3ECDC17FE428A9F, xmp.did:34E930A50D06DF11B3ECDC17FE428A9F, uuid:714CEDD50018DE119C7AF18FF295A02E, uuid:8683D952FEF2DD11B07EBEE629698EEC, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:36E930A50D06DF11B3ECDC17FE428A9F, xmp.did:6DB3413B4CE4DE119EA39436D6790B88, uuid:C6630B259416DB119752CE0FD4DE5706, xmp.did:6FB3413B4CE4DE119EA39436D6790B88, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:71B3413B4CE4DE119EA39436D6790B88, xmp.did:16C3C05B4FE4DE119EA39436D6790B88, xmp.did:18C3C05B4FE4DE119EA39436D6790B88, xmp.did:1DC3C05B4FE4DE119EA39436D6790B88, xmp.did:4CD237DC1DE5DE118ED3D44ADE577850, xmp.did:4ED237DC1DE5DE118ED3D44ADE577850, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:50D237DC1DE5DE118ED3D44ADE577850, xmp.did:52D237DC1DE5DE118ED3D44ADE577850, xmp.did:54D237DC1DE5DE118ED3D44ADE577850, xmp.did:54341B652BE5DE118ED3D44ADE577850, xmp.did:58341B652BE5DE118ED3D44ADE577850, xmp.did:5A341B652BE5DE118ED3D44ADE577850, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:5B9E76F4FBDDDE1192F6AD9FD80B8609, xmp.did:CC39CDC7A4D4DE11BCCE9EA5C3D5DFA9, xmp.did:4650638365D5DE119A4CB31C08CB3F9C, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:C88BF659A6D4DE11BCCE9EA5C3D5DFA9, xmp.did:CF8BF659A6D4DE11BCCE9EA5C3D5DFA9, xmp.did:C88BF659A6D4DE11BCCE9EA5C3D5DFA9, xmp.did:3E7A78643BD5DE11B76EB2D28D39D5B8, uuid:C6630B259416DB119752CE0FD4DE5706, uuid:714CEDD50018DE119C7AF18FF295A02E, xmp.did:DCD54FE62DEFDE118685EA40E9684897
Doc Change Count                : 462
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 51
Author                          : Cisco

EXIF Metadata provided by EXIF.tools