LINKSYS EA3500 High Performance Dual-Band N Router User Manual E Series Router Cert E3500
LINKSYS LLC High Performance Dual-Band N Router E Series Router Cert E3500
LINKSYS >
Contents
- 1. User Manual - Operation
- 2. User Manual - Statements
User Manual - Operation
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1629944 |
| Application ID | x9jnavfkkuFt3IIwKDnQ8g== |
| Document Description | User Manual - Operation |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 90.34kB (1129271 bits) |
| Date Submitted | 2012-02-02 00:00:00 |
| Date Available | 2012-03-24 00:00:00 |
| Creation Date | 2011-11-15 10:58:38 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2012-01-31 10:33:27 |
| Document Title | Microsoft Word - E-Series_Router_Cert_E3500.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | rosun |
Linksys E-Series Routers Linksys E-Series Table of Contents Table of Contents Product overview E1200/E1500/E2500/E3500 Back view Bottom view E4200 Top view Back view Wireless Security Setting Up Your E-Series Router Where to find more help How to set up your router How to start Cisco Connect Use Cisco Connect to manage your router How to manually set up your router Language Internet Setup Wireless > Basic Wireless Settings Wireless Settings Personal options Office options Option settings Troubleshooting How to run Cisco Connect after setup Your router was not successfully set up Get Windows XP Service Pack 3 message Your Internet cable is not plugged in message Cannot access your router message Device not found message 11 12 12 13 14 15 Specifications Advanced Configuration How to open the browser-based utility Setup > Basic Setup Wireless > Wireless Security Linksys E1200 Linksys E1500 Linksys E2500 Linksys E3500 Linksys E4200 17 18 19 20 21 Linksys E-Series Product overview Product overview • Power indicator—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection Flashes slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection Flashes quickly when there is a Wi-Fi Protected Setup error • Power—Connect the included AC power adapter to this port E1200/E1500/E2500/E3500 CAUTION Use only the adapter that came with your router Back view • Power button—Press | (on) to turn on the router Bottom view Power port Internet port USB port (E3500 only) Ethernet ports Power indicator Wi-Fi Protected Setup button Your router’s appearance may vary • USB port (E3500 only)—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port • Ethernet ports—Connect Ethernet cables (also called network cables) to these Fast Ethernet (10/100, for E1200 and E1500) or Gigabit (10/100/1000, for E2500 and E3500) ports, color coded blue, and to other wired Ethernet network devices on your network • Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem Your router’s appearance may vary • Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults You can also restore the defaults using the browser-based utility Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices For more information, see “Wireless Security” on page 8 Linksys E-Series Product overview E4200 Back view Top view Ethernet ports Internet port Power port Wi-Fi Protected Setup button Reset button USB port • Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network • Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem • Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices For more information, see “Wireless Security” on page 8 • USB port—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port • Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults You can also restore the defaults using the browser-based utility • Power—Connect the included AC power adapter to this port Indicator light • Indicator light—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection Pulses slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection Flashes quickly when there is a Wi-Fi Protected Setup error CAUTION Use only the adapter that came with your router • Power button—Press | (on) to turn on the router Linksys E-Series Setting Up Your E-Series Router Setting Up Your E-Series Router Where to find more help In addition to this User Guide, you can find help at these locations: • Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) • Cisco Connect help (run Cisco Connect, then click Learn More where available) • Browser-based utility context-sensitive help (open the utility, then click Help in the right-side column ) To start Cisco Connect for the first time: 1 . Insert the CD into your CD or DVD drive 2 . Click Set up your Linksys Router If you do not see this: • For Windows, click Start, Computer, then double-click the CD drive and the Setup icon • For Mac, double-click the CD icon on your desktop, then double-click the Setup icon 3 . Follow the on-screen instructions to complete your router setup How to set up your router The easiest and fastest way to set up your router is to run the Cisco Connect setup software How to start Cisco Connect When you run the setup CD, Cisco Connect (your router’s setup software) is automatically installed onto your computer You can then use Cisco Connect to easily manage your router NOTE: If you lose your setup CD, you can download the software from Linksys.com/support Use Cisco Connect to manage your router After your router has been set up and Cisco Connect has been installed, you can use Cisco Connect to easily manage many of your router’s settings such as: • Connect devices to your network • Test your Internet connection speed • Configure parental controls • Set up guest access • Change your router’s name and password How to manually set up your router After setting up the router with the setup software (located on the CD), the router will be ready for use If you would like to change its advanced settings, or if the software does not run, use the router’s browser-based utility You can access the utility with a web browser on a computer connected to the router For more information on using the utility, see “How to open the browser-based utility” on page 4 Linksys E-Series Advanced Configuration Advanced Configuration How to open the browser-based utility To access some advanced settings, you need to open the browser-based utility To open the browser-based utility: 1 . Run Cisco Connect, click Change under Router settings, click Advanced settings, then click oK – or – 2 . Enter the user name and password, then click oK The utility’s main menu opens TIPS If you set up your router without using Cisco Connect, your router’s default password is admin (You can leave the user name blank ) If you used Cisco Connect to set up your router, you can see your router’s user name and password by running Cisco Connect, then clicking Router settings Open a web browser on a computer connected to your network, then go to 192.168.1.1 The router prompts you for a user name and password Linksys E-Series Advanced Configuration Setup > Basic Setup Language The first screen that appears is the Basic Setup screen This allows you to change the router’s general settings Select your language To use a different language, select one from the dropdown menu The language of the browser-based utility will change five seconds after you select another language Internet Setup The Internet Setup section configures the router to your Internet connection Most of this information can be obtained through your Internet Service Provider (ISP) Internet Connection Type Select the type of Internet connection your ISP provides from the drop-down menu The available types are: • Automatic Configuration - DHCP • Static IP • PPPoE • PPTP • L2TP • Telstra Cable Automatic Configuration - DHCP The default Internet Connection Type is Automatic Configuration - DHCP (Dynamic Host Configuration Protocol) Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address (This option usually applies to cable connections ) Static IP If you are required to use a fixed IP address to connect to the Internet, select Static IP PPPoE If you have a DSL connection, check whether your ISP uses Point-to-Point Protocol over Ethernet (PPPoE) If so, select PPPoE Linksys E-Series PPTP Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe If your PPTP connection supports DHCP or a dynamic IP address, then select obtain an IP Address Automatically If you are required to use a fixed IP address to connect to the Internet, then select Specify an IP Address and configure the options below Advanced Configuration Wireless > Basic Wireless Settings The basic settings for wireless networking are set on this screen NOTE After you set up the wireless network(s), set up the wireless security settings L2TP Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel Wireless Settings Telstra Cable Telstra Cable is a service that generally applies to connections in Australia Connect on Demand or Keep Alive The Connect on Demand and Keep Alive options let you choose whether the router connects to the Internet only as needed (useful if your ISP charges for connect time), or if the router should always be connected Select the appropriate option network Mode Select the wireless standards your network will support • Mixed If you have Wireless-N (2 4 GHz), Wireless-G, and Wireless-B devices in your network, keep the default, Mixed • Wireless-B/G only If you have both Wireless-B and Wireless-G (2 4 GHz) devices in your network, select Wireless-B/G only • Wireless-B only If you have only Wireless-B devices, select Wireless-B only • Wireless-G only If you have only Wireless-G devices, select Wireless-G only • Wireless-n only If you have only Wireless-N (2 4 GHz) devices, select Wireless-n only • Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2 4 GHz) devices in your network, select Disabled NOTE If you have a dual-band router, you can select Mixed, Wireless-A Only, Wireless-N Only, or Disabled for the 5 GHz band If you are not sure which mode to use, keep the default, Mixed Linksys E-Series Advanced Configuration network name (SSID) The Service Set Identifier (SSID) is the network name shared by all devices in a wireless network It is case-sensitive and must not exceed 32 keyboard characters The default is Cisco followed by the last 5 digits of the router’s serial number, which is found on the bottom of the router If you used the setup software for installation, then the default Network Name is changed to an easy-to-remember name NOTE If you restore the router’s factory default settings (by pressing the Reset button or using the Administration > Factory Defaults screen), the Network Name will return to its default value Change the Network Name back to its original name, or you will have to reconnect all devices on your wireless network to the new network name Channel Width For best performance in a network using Wireless-B, Wireless-G and Wireless-N (2 4 GHz) devices, select Auto (20 MHz or 40 MHz) For a channel width of 20 MHz, keep the default, 20 MHz only Channel Select the channel from the drop-down list for Wireless-B, Wireless-G, and Wireless-N (2 4 GHz) networking If you are not sure which channel to select, then keep the default, Auto SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router To broadcast the router’s SSID, keep the default, Enabled If you do not want to broadcast the router’s SSID, then select Disabled Linksys E-Series Wireless Security Wireless Security Wireless > Wireless Security Option settings The wireless security settings configure the security of your wireless network(s) The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS (WPA stands for Wi-Fi Protected Access WEP stands for Wireless Equivalent Privacy RADIUS stands for Remote Authentication Dial-In User Service ) WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal NOTES If you select WPA2/WPA Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA and the same passphrase If you select WPA2 Personal as your Security Mode, each device in your wireless network MUST use WPA2 Personal and the same passphrase Personal options Security option Strength WPA2 Personal Strongest WPA2/WPA Mixed Mode WPA2: Strongest WPA: Strong WPA Personal Strong WEP Basic Office options The office options are available for networks that use a RADIUS server for authentication The office options are stronger than the personal options because WPA2 or WPA provides encryption while RADIUS provides authentication Security option Strength WPA2 Enterprise Strongest WPA2/WPA Enterprise Mixed Mode WPA2: Strongest WPA: Strong WPA Enterprise Strong RADIUS Basic If you select WPA Personal as your Security Mode, each device in your wireless network MUST use WPA Personal and the same passphrase Passphrase Enter a passphrase of 8-63 characters The default is password If you used the setup software for installation, then the default is changed to a unique passphrase, which you can find by running Cisco Connect, then clicking Router settings Linksys E-Series WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise These option is used in coordination with a RADIUS server (These should only be used when a RADIUS server is connected to the router ) NOTES If you select WPA2/WPA Enterprise Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA Enterprise and the same shared key Wireless Security WEP WEP is a basic encryption method, which is not as secure as WPA NOTE: If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key If you select WPA2 Enterprise as your Security Mode, each device in your wireless network MUST use WPA2 Enterprise and the same shared key If you select WPA Enterprise as your Security Mode, each device in your wireless network MUST use WPA Enterprise and the same shared key Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits) Passphrase Enter a passphrase to automatically generate WEP keys Then click Generate Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually RADIUS Server Enter the IP address of the RADIUS server TX Key Select a default TX (Transmit) Key to use The default is 1 RADIUS Port Enter the port number of the RADIUS server The default is 1812 Shared Key Enter the key shared between the router and the server Linksys E-Series Wireless Security RADIUS Disabled This option features WEP used in coordination with a RADIUS server (This should only be used when a RADIUS server is connected to the router ) If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security NOTE: If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key RADIUS Server Enter the IP address of the RADIUS server RADIUS Port Enter the port number of the RADIUS server The default is 1812 Shared Secret Enter the key shared between the router and the server Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits) Passphrase Enter a passphrase to automatically generate WEP keys Then click Generate Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually TX Key Select a default TX (Transmit) Key to use The default is 1 10 Linksys E-Series Troubleshooting Troubleshooting This chapter can help you solve common setup issues and connect to the Internet Your router’s CD includes Cisco Connect, the router setup software that makes it easy to connect network devices, change router settings, control guest access, enable parental controls, and connect to the Internet Cisco Connect is also installed onto your computer during setup If Cisco Connect is prevented from completing the setup, this chapter will guide you through finding solutions How to run Cisco Connect after setup When you run the setup CD, Cisco Connect is automatically installed onto your computer You can then use Cisco Connect to easily manage your network To start Cisco Connect on a Windows computer: 1 . Click Start, All Programs, then click Cisco Connect The Cisco Connect main menu opens To start Cisco Connect on a Mac oS X computer: 1 . Open Finder and click Applications in the left panel 2 . Double-click the Cisco Connect icon You can find more help from our award-winning customer support at linksys.com/support. The Cisco Connect main menu opens 11 Linksys E-Series Troubleshooting Your router was not successfully set up • Temporarily disable your computer’s firewall (see the security software’s instructions for help), then run the Setup program again on the router’s CD • If you have another computer, use that computer to run the Setup program again on the router’s CD Get Windows XP Service Pack 3 message On Windows XP computers, Cisco Connect requires Service Pack 3 in order to work If you receive a “Get Windows Service Pack 3” message when setting up your router for the first time, follow these troubleshooting steps If Cisco Connect did not complete the setup, you can try the following: • Press and hold the Reset button on your router with a paperclip or pin for 10-15 seconds, then run the Setup program again on the router’s CD If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3 TIP To temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem To install Service Pack 3: 1 . Click the link in the Cisco Connect error message or connect to the Microsoft Update website (update.microsoft.com/windowsupdate) 2 . Follow the instructions on the website or contact Microsoft if you need further help Your router’s appearance may vary 3 . After downloading and installing Service Pack 3, run the Setup program on your router’s CD 12 Linksys E-Series Troubleshooting Your Internet cable is not plugged in message If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps Back view of cable modem Back view of DSL modem 2 . Make sure that your modem is connected to power and is turned on If it has a power switch, make sure that it is set to the on or l position 3 . If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port To fix the problem: 1 . Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem This port on the modem is usually labeled Ethernet, but may be named Internet or WAn 4 . If your computer was previously connected to your modem with a USB cable, disconnect the USB cable 5 . Return to the Cisco Connect window and click next to try again If the window has already been closed, run the Setup program again on the router’s CD Back view of router 13 Linksys E-Series Cannot access your router message If you cannot access your router because your computer is not connected to your network, follow these troubleshooting steps Troubleshooting 3 . Click your own network name, then click Connect In the example below, the computer was connected to another wireless network named JimsRouter The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected To access your router, you must be connected to your own network If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network To fix the problem on Windows computers: 1 . On your Windows desktop, right-click the wireless icon in the system tray 4 . If you are prompted to enter a network key, type your password (Security Key) into the network key and Confirm network key fields, then click Connect 2 . Click View Available Wireless networks A list of available networks appears Your computer connects to the network, and you should now be able to access the router 14 Linksys E-Series To fix the problem on Mac computers: 1 . In the menu bar across the top of the screen, click the AirPort icon A list of wireless networks appears Cisco Connect has automatically assigned your network a name Troubleshooting Device not found message If you get a “Device not found” message when trying to connect a network device (such as an iPhone, iPod, or smartphone), follow these troubleshooting steps In the example below, the computer was connected to another wireless network named JimsRouter The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected 2 . Click the wireless network name of your Linksys E-Series router (BronzeEagle in the example) 3 . Type your wireless network password (Security Key) into the Password field, then click oK TIP For a stronger signal during initial setup, move your wireless devices near your router Long distances make it harder for the router to detect the devices To fix the problem: 1 . Run Cisco Connect 15 Linksys E-Series 2 . Click Computers and devices The Computers and other devices window appears 3 . Click other Wireless devices Troubleshooting Example: On your Smartphone or other wireless device, locate the WiFi menu and search for available wireless networks In this example, using the network information provided by Cisco Connect shown in the previous screen, click BronzeEagle Android 4 . Enable your wireless network device’s Wi-Fi connection, then search for your wireless network name See your device documentation for help NOTE Your wireless device must support WPA/WPA2 5 . On the wireless network device, select the network name of your router and enter the password (Security Key) 6 . In Cisco Connect, click next iPhone 7 . Enter the password (Security Key) provided by Cisco Connect In this example, the security key is B6eM9UkCjz NOTE The password is case sensitive Make sure that you enter letters in the correct case 8 . When your wireless device is successfully connected to your wireless network, enter a name for the device in Cisco Connect, then click Finish 16 Linksys E1200 Specifications Specifications Linksys E1200 Environmental Model Name Linksys E1200 Description Wireless-N Router Model Number E1200 Standards 802 11n, 802 11g, 802 11b, 802 3u Ports Power, Internet, and Ethernet (1-4) Buttons Reset, Wi-Fi Protected Setup™ LEDs Dimensions 188 7 × 151 7 × 31 2 mm (7 43” × 5 97” × 1 23”) Unit Weight 252 7g (8 91 oz ) Power 12V, 0 5A Certifications FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802 11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Operating Temp 0 to 40°C (32 to 104°F) Storage Temp -20 to 60°C (-4 to 140°F) Cabling Type CAT 5e Operating Humidity 10 to 80% non-condensing Transmitted Power 802 11n (20 MHz): 15 0 ± 1 5dBm @ CH6, MCS 0~4, MCS 8~12 13 5 ± 1 5dBm @ CH6, MCS 5~7, MCS 13~15 Storage Humidity 5 to 90% non-condensing 802 11n (40 MHz): 14 0 ± 1 5dBm @ CH6, MCS 0~4, MCS 8~12 13 5 ± 1 5dBm @ CH6, MCS 5~7, MCS 13~15 802 11g: 14 5 ± 1 5dBm @ CH6, all rates 802 11b: 16 5 ± 1 5dBm @ CH6, all rates Antenna Gain ≤2 5 dBi, ≤4 0 dBi (2 antennas) UPnP Supported Wireless Security Wi-Fi Protected Access™ 2 (WPA2), WEP, wireless MAC filtering Security Key Bits Up to 128-bit encryption NOTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 17 Linksys E1500 Specifications Linksys E1500 Environmental Dimensions 188 7 × 151 7 × 31 2 mm (7 43” × 5 97” × 1 23”) Unit Weight 254 1g (8 96 oz ) Power 12V, 0 5A Certifications FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802 11b/g/n), WPA2, WMM, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Operating Temp 0 to 40°C (32 to 104°F) Storage Temp -20 to 60°C (-4 to 140°F) Cabling Type CAT 5e Operating Humidity 10 to 80% non-condensing Transmitted Power 802 11n (20 MHz): 17 0 ± 1 5 dBm @ CH6, MCS 0~4, MCS 8~12 16 0 ± 1 5 dBm @ CH6, MCS 5~7, MCS 13~15 Storage Humidity 5 to 90% non-condensing Model Name Linksys E1500 Description Wireless-N Router with SpeedBoost Model Number E1500 Standards 802 11n, 802 11g, 802 11b, 802 3u Ports Power, Internet, and Ethernet (1-4) Buttons Reset, Wi-Fi Protected Setup LEDs 802 11n (40 MHz): 15 5 ± 1 5 dBm @ CH6, MCS 0~4, MCS 8~12 14 0 ± 1 5 dBm @ CH6, MCS 5~7, MCS 13~15 802 11g: 18 0 ± 1 5 dBm @ CH6, 6 Mbps 17 0 ± 1 5 dBm @ CH6, 54 Mbps 802 11b: 18 0 ± 1 5 dBm @ CH6, all rates Antenna Gain ≤3 0 dBi, ≤4 0 dBi, ≤4 5 dBi (3 antennas) UPnP Supported Wireless Security Wi-Fi Protected Access 2 (WPA2), WEP, wireless MAC filtering Security Key Bits Up to 128-bit encryption NOTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 18 Linksys E2500 Specifications Linksys E2500 Environmental Model Name Linksys E2500 Description Advanced Dual-Band N Router Model Number E2500 Standards 802 11n, 802 11a, 802 11g, 802 11b, 802 3, 802 3u, 802 3ab # of Antennas 4 total, 2 internal antennas per each 2 4 GHz & 5 GHz radio band Detachable (y/n) No Modulation 802 11b: CCK, QPSK, BPSK 802 11g: OFDM 802 11a: OFDM 802 11n: BPSK, QPSK, 16-QAM, 64-QAM Receive Sensitivity (Typical) 2 4 GHz 802 11b: -87 dBm @ 11 Mbps 802 11g: -70 dBm @ 54 Mbps 802 11n 20 MHz: -70 dBm @ MCS15 802 11n 40 MHz: -66 dBm @ MCS15 5 GHz 802 11a: -70 dBm @ 54 Mbps 802 11n 20 MHz: -66 dBm @ MCS23 802 11n 40 MHz: -62 dBm @ MCS23 Antenna Gain in dBi Dimensions 225 x 35 x 180 mm (8 86” x 1 38” x 7 09”) Unit Weight 452 g (15 94 oz) Power 12V, 1A Certifications FCC, IC, CE, Wi-Fi A/B/G/N Operating Temp 0 to 40°C (32 to 104°F) Storage Temp -20 to 60°C (-4 to 140°F) Operating Humidity 10 to 80%, relative humidity, non-condensing Storage Humidity 5 to 90% non-condensing NOTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 2 4 GHz: Antenna 1 (right rear): ≤2 94 dBi Antenna 2 (front right): ≤3 78 dBi 5 GHz: Antenna 1 (right front): ≤5 86 dBi Antenna 2 (front left): ≤4 88 dBi UPnP Supported Security features WEP, WPA, WPA2 Security key bits Up to 128-bit encryption 19 Linksys E3500 Specifications Linksys E3500 Storage File System Support FAT, and NTFS, and HFS+ Model Name Linksys E3500 Environmental Description Dual-Band N750 Router with Gigabit and USB Dimensions Model Number E3500 6 69” x 0 98” x 7 48” (170 x 25 x 190 mm) # of Antennas 6 total, 3 internal antennas per each 2 4 GHz & 5 GHz radio band Unit Weight 7 62 oz (216 g) Power 12V, 2A Detachable (y/n) No Certifications FCC, IC, CE, Wi-Fi A/B/G/N Switch Port Speed 10/100/1000 Mbps Operating Temp 32 to 95°F (0 to 35°C) Ports Internet, Ethernet (1-4), USB, Power Storage Temp -4 to 140°F (-20 to 60°C) Buttons Reset, Wi-Fi Protected Setup Operating Humidity LEDs Power, Ethernet (1-4) 10 to 80% relative humidity, non-condensing Modulation 802 11b: CCK, QPSK, BPSK 802 11g: OFDM 802 11a: OFDM 802 11n: BPSK, QPSK, 16-QAM, 64-QAM Storage Humidity 5 to 90% non-condensing Receive Sensitivity 2 4 GHz 802 11b: -87 dBm @ 11 Mbps (Typical) 802 11g: -77 dBm @ 54 Mbps (Typical) 802 11n (20 MHz): -71 dBm @ MCS15 (Typical) 802 11n (40 MHz): -68 dBm @ MCS15 (Typical) 5 GHz 802 11a: -75 dBm @ 54 Mbps (Typical) 802 11n 20 MHz: -70 dBm @ MCS15 (Typical) 802 11n 40 MHz: -67 dBm @ MCS15 (Typical) Antenna Gain NOTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 2 4 GHz (Dipole Antennas) Antenna 1 ≤ 2.69 dBi (right) Antenna 2 ≤ 3.67 dBi (left) Antenna 3 ≤ 4.95 dBi (front) 5 GHz (Dipole Antennas) Antenna 1 ≤ 4.73 dBi (right) Antenna 2 ≤ 3.32 dBi (left) Antenna 3 ≤ 3.88 dBi (front) UPnP Supported Security features WEP, WPA, WPA2 Security key bits Up to 128-bit encryption 20 Linksys E4200 Specifications Linksys E4200 Supported File Systems for Storage Device FAT32, NTFS, and HSF+ Model Name Linksys E4200 UPnP Supported Description Maximum Performance Wireless-N Router Security Features WEP, WPA, WPA2 Model Number E4200 Security Key Bits Up to 128-bit encryption Standards 802 11n, 802 11a, 802 11g, 802 11b, 802 3, 802 3u, 802 3ab Environmental Radio Frequency 2 4 and 5 GHz Dimensions Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) 8 86” x 0 98” x 6 30” (225 x 25 x 160 mm) Ports Power, USB, Internet, Ethernet (1-4) Unit Weight 12 7 oz (0 36 g) Power 12V, 2A Certifications FCC, IC, CE, Wi-Fi a/b/g/n, Windows 7, DLNA Operating Temp 32 to 104°F (0 to 40°C) Storage Temp -4 to 140°F (-20 to 60°C) Operating Humidity 10 to 80% relative humidity, non-condensing Storage Humidity 5 to 90% non-condensing Buttons Reset, Wi-Fi Protected Setup LEDs Top panel: Power Back panel: Internet, Ethernet (1-4) Number of Antennas 6 total, 3 internal antennas per each 2 4 GHz and 5 GHz radio band No Detachable (y/n) Modulations Receive Sensitivity 802 11b: CCK, QPSK, BPSK 802 11g: OFDM 802 11a: OFDM 802 11n: BPSK, QPSK, 16-QAM, 64-QAM 2 4 GHz 802 11b: -87 dBm @ 11 Mbps (Typical) 802 11g: -77 dBm @ 54 Mbps (Typical) 802 11n: 20 MHz: -70 dBm @ MCS23 (Typical) 802 11n: 40 MHz: -66 dBm @ MCS23 (Typical) 5 GHz 802 11a: -74 dBm @ 54 Mbps (Typical) 802 11n: 20 MHz: -67 dBm @ MCS23 (Typical) 802 11n: 40 MHz: -64 dBm @ MCS23 (Typical) Antenna Gain in dBi 2 4 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3 31 dBi (Right) PIFA 2 ≤ 3 45 dBi (Front) PIFA 3 ≤ 1 96 dBi (Left) 5 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3 71 dBi (Right) PIFA 2 ≤ 3 60 dBi (Front) PIFA 3 ≤ 4 27 dBi (Left) NOTES For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support Specifications are subject to change without notice Maximum performance derived from IEEE Standard 802 11 specifications Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions 21 Visit linksys.com/support for award-winning 24/7 technical support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries A listing of Cisco’s trademarks can be found at www cisco com/go/trademarks All other trademarks mentioned in this document are the property of their respective owners © 2011 Cisco and/or its affiliates All rights reserved 3425-01547
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : 3.1-701 About : uuid:724552a7-b9f3-4228-bc01-5cc23b8fde17 Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:01:31 10:33:27+08:00 Create Date : 2011:11:15 10:58:38-08:00 Metadata Date : 2012:01:31 10:33:27+08:00 Document ID : uuid:914169fd-c54c-4aa2-b340-1fe8d06a0ac1 Instance ID : uuid:30b9ac1a-1061-4eb2-9a63-e2a5a05c50b4 Format : application/pdf Title : Microsoft Word - E-Series_Router_Cert_E3500.doc Creator : rosun Page Count : 24 Author : rosunEXIF Metadata provided by EXIF.tools