LINKSYS EA6900 Linksys Smart Wi-Fi Router AC1900 User Manual User guide Linksys Router

LINKSYS LLC Linksys Smart Wi-Fi Router AC1900 User guide Linksys Router

Contents

User Manual.pdf

User GuideSMART Wi-Fi Router AC1900, EA6900
iContentsLinksys EA-SeriesiProduct OverviewEA6900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Wall-mounting placement 4Setting Up: BasicsHow to create a home network. . . . . . . . . . . . . . . . . . . . . .5What is a network? 5How to set up a home network 5Where to nd more help . . . . . . . . . . . . . . . . . . . . . . . . . .5How to install your router . . . . . . . . . . . . . . . . . . . . . . . . .6How to congure your router. . . . . . . . . . . . . . . . . . . . . . .7How to connect to Linksys Smart Wi-Fi 7How to connect directly to your router 8How to improve your wireless connection speed 8How to change your network’s name and password 9How to change your router’s local access password 9How to change your router’s time zone 10How to test your Internet connection speed . . . . . . . . . . . . 10How to connect devices to your network . . . . . . . . . . . . . . 11How to connect a computer to your network 11How to connect a USB printer 11How to connect other devices 12How to view device details 13How to set up parental controls . . . . . . . . . . . . . . . . . . . . 14How to set parental controls 14How to congure your guest network . . . . . . . . . . . . . . . . 15How to back up your router conguration . . . . . . . . . . . . . 16How to customize Linksys Smart Wi-Fi . . . . . . . . . . . . . . . . 17Using widgets 17Customizing the Device List 17Using an External DriveOverview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18How to attach a USB drive . . . . . . . . . . . . . . . . . . . . . . . .18How to use secured folder access . . . . . . . . . . . . . . . . . . . 19How to set up authorized users and shared folders 19How to access shared folders 20How to set up your router as a media server . . . . . . . . . . . . 21How to connect your UPnP device to the media server 22How to remotely access storage . . . . . . . . . . . . . . . . . . . . 22Setting Up: AdvancedHow to manually set up your router. . . . . . . . . . . . . . . . . .24How to manually set up your Internet connection 24How to associate a router with your Linksys Smart Wi-Fi account 25How to get the most out of your dual-band router . . . . . . . . 26How to control access to your network. . . . . . . . . . . . . . . .27How to improve security using the built-in rewall 29How to set up the DHCP server on your router . . . . . . . . . . .30How to set up DHCP reservation 31How to access your network on the Internet . . . . . . . . . . . . 32How to clone a MAC address . . . . . . . . . . . . . . . . . . . . . . 33How to connect to your corporate oce using a VPN . . . . . . 33How to optimize your router for gaming and voice . . . . . . . . 34How to enable Voice over IP on your network . . . . . . . . . . . 35How to congure UPnP . . . . . . . . . . . . . . . . . . . . . . . . . 36How to use a router as an access point . . . . . . . . . . . . . . . .37How to put your new router behind an existing router. . . . . .38Contents
iiContentsLinksys EA-SeriesTo add your router to an existing router or gateway 38To share an Internet connection 39To extend your network 41How to expose a device to the Internet . . . . . . . . . . . . . . . 41Port Forwarding and Port TriggeringHow to set up port forwarding . . . . . . . . . . . . . . . . . . . . .43How to set up port forwarding for a single port 43How to set up port forwarding for multiple ports 44How to set up port forwarding for a range of ports 44How to set up port range triggering for online gaming . . . . . 45Maintaining and MonitoringHow to back up and restore your router conguration. . . . . .47How to upgrade the router’s rmware . . . . . . . . . . . . . . . . 48How to restore factory defaults . . . . . . . . . . . . . . . . . . . . 48How to check the status of your router. . . . . . . . . . . . . . . .49How to disable the Ethernet port status lights 50How to test your Internet connection 50How to congure and use logs 51TroubleshootingYour router was not successfully set up . . . . . . . . . . . . . . . 52Windows XP Service Pack update . . . . . . . . . . . . . . . . . . . 52Your Internet cable is not plugged in message . . . . . . . . . . . . 53Cannot access your router message . . . . . . . . . . . . . . . . . . 53After setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55The Internet appears to be unavailable 55Linksys Smart Wi-Fi does not open in your web browser 55You cannot access Linksys Smart Wi-Fi 56All other troubleshooting has been unsuccessful 56SpecicationsLinksys EA6900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
1Product OverviewLinksys EA-Series1Product OverviewEA6900Package contentsIn addition to your router, your router package includes: •Network (Ethernet) cable •AC power adapter •SimpleTap™ cardFeaturesWireless-AC technologyBuilt with leading 802.11ac wireless technology, your router offers maximum speed and range to create an ultra-powerful network designed for home theater performance. Connect your computers, Internet-ready TVs, game consoles, smartphones and other Wi-Fi devices at blazingly fast transfer rates for an unrivaled experience.The power of dual bandDouble your network bandwidth with simultaneous dual-band wireless-AC. The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming.SpeedBoostHigher quality antenna technology helps maintain high speeds across greater distances throughout your home.Advanced securityKeep Wi-Fi freeloaders and Internet threats at bay with WPA2 encryption and SPI firewall to help keep your network protected.Benefits of gigabitUse the four Gigabit Ethernet (10/100/1000) ports for quick file sharing (up to 10× faster than standard Ethernet) between other Gigabit-enabled devices like computers and servers.Built-in USB ports and DLNA media serverThe USB ports let you add an external USB drive to your network and share files at home or over the Internet. It also features a built-in DLNA media server for seamless streaming of your video and media files to an Xbox 360, PS3, or other DLNA-compatible device. You can also connect a USB printer and share it across your network.
2Product OverviewLinksys EA-SeriesHome theater readyBring the ultimate entertainment experience to your home by connecting computers, Internet-ready TVs, game consoles, media players, and more to your wireless network and the Internet. Simultaneous dual-band N and QoS traffic prioritization technology delivers maximum speed and performance so you can enjoy fast downloads, smooth video and music streaming, and reliable gaming and VoIP.Quick to installLinksys Smart Wi-Fi software helps you easily set up your router.IPv6 enabledSupports the latest Internet protocol technology to future-proof your network.Easy to manageLinksys Smart Wi-Fi software helps you customize your settings and quickly add multiple devices to your network:Separate guest networkCreate a separate, password-protected network for guests.Parental controlsLimit access time and websites with parental controls.Top viewIndicator light •Indicator light—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Pulses slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup error.
3Product OverviewLinksys EA-SeriesBack viewInternet Ethernet142 312VDCPowerReset USB1 USB2Ethernet portsWi-Fi Protected Setup button Internet portPower portReset button USB ports •Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. •Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to wired Ethernet network devices on your network.NOTEFor best performance, use CAT5E or higher rated cables on the Ethernet ports. •Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem. •USB ports—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to one of these ports. You can also connect a USB printer and share it across your network. •Reset button—Press and hold this button for 10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using Linksys Smart Wi-Fi. •Power port—Connect the included AC power adapter to this port. CAUTIONUse only the adapter that came with your router.Port activity indicatorsGreen connectivity indicatorYellow network activity indicatorNetwork or Internet port •Green connectivity indicator—On Ethernet ports, turns on when a cable connects the port to another Gigabit Ethernet port. On the Internet port, turns on while connected to a modem. •Yellow network activity indicator—Flashes to indicate network activity over that port.
4Product OverviewLinksys EA-SeriesWall-mounting placementThe router has two wall-mount slots on its bottom panel. The distance between the slots is 82 mm. Two screws are needed to mount the router.Suggested Mounting Hardware3-5 mm7-8 mm 1.5-2 mmNOTELinksys is not responsible for damages incurred by unsecured wall-mounting hardware.Follow these instructions:1. Determine where you want to mount the router. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet.2. Drill two holes into the wall. Make sure the holes are 82 mm apart.3. Insert a screw into each hole and leave 3 mm of its head exposed.4. Position the router so the wall-mount slots line up with the two screws.5. Place the wall-mount slots over the screws and slide the router down until the screws fit snugly into the wall-mount slots.Wall-mounting templatePrint this page at 100% size. Cut along the dotted line, and place on the wall to drill precise spacing.82 mm
5Setting Up: BasicsLinksys EA-Series5How to create a home networkWhat is a network?A network is any group of devices that can communicate with each other. A home network can also include Internet access, which requires a router like this one. A typical home network may include multiple computers, a printer, a modem, and a router. A large home network may also have a switch, additional routers, access points, and many Internet-capable media devices such as TVs, game consoles, and web cameras. •Modem—Connects a computer or a router to your ISP (Internet Service Provider). Your ISP may have provided one. The modem is a device that connects to a phone jack or your cable TV outlet. •Router—Connects your wireless and wired network devices to each other and to the modem (and to your ISP). •Switch—Allows you to connect several wired network devices to your home network. Your router has a built-in network switch (the Ethernet ports). If you have more wired network devices than available Ethernet ports on your router, you will need an additional switch to consolidate the wired connections.How to set up a home network1. Purchase the proper equipment. For a network that includes Internet access, you’ll need: •Computers with an Ethernet port or wireless networking capabilities •A modem for connecting to your ISP (typically supplied by your ISP) •A router to connect your computers with each other and to the modem •Internet service to your home, provided by an ISP (Internet Service Provider)2. Make sure that your modem is working. Your ISP can help you set up your modem and verify that it’s working correctly.3. Set up your router. See “How to install your router” on page 6.4. To connect a computer or other network device to the network, see “How to connect a computer to your network” on page 11 and “How to connect other devices” on page 12.Where to find more helpIn addition to this User Guide, you can find help at these locations: •Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) •Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the screen)Setting Up: Basics
6Setting Up: BasicsLinksys EA-SeriesHow to install your routerTo install your router:1. Power on your new router. If replacing an existing router, disconnect it.2. Connect the Internet cable from your modem to the yellow Internet port on your router. Wait until the power light on the front of the router is solid.3. Connect to the secure wireless name shown in the Quick Start Guide that came with your router. (You can change the network name and password later during router setup.) If you need help connecting to the network, refer to your device documentation. Note: You will not have Internet access until router setup is complete.4. Open a web browser and follow the instructions to complete your router’s setup. If instructions do not appear in the web browser, enter linksyssmartwifi.com in the browser’s address bar.5. At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to easily manage your router’s settings, such as: • Change your router’s name and password • Set up guest access • Configure parental controls • Connect devices to your network • Test your Internet connection speedNOTE:As part of the router setup process, you will be sent a verification e-mail. From your home network, click the link in the e-mail to associate your router with the Linksys Smart Wi-Fi account. Make sure that the link opens in a supported web browser, such as Internet Explorer 8 or higher, Firefox 8 or higher, Google Chrome 10 or higher, and Safari 5 (for Mac) or higher.If you cannot click the link while behind your new Linksys router, log into Linksys Smart Wi-Fi while behind the router and add your router there. For more information, see “How to associate a router with your Linksys Smart Wi-Fi account” on page 25.TIP:Print this page, then record your router and account settings in the table below as a reference. Store your notes in a safe place. Setup also saves your setup information as a file to your computer desktop.Network Name (SSID)Network PasswordRouter PasswordGuest Network NameGuest Network PasswordLinksys Smart Wi-Fi UsernameLinksys Smart Wi-Fi Password
7Setting Up: BasicsLinksys EA-SeriesHow to configure your routerYou can change router settings to make your network more secure or to work better with a device or game. Being able to adjust the settings while you’re away from home can help make router administration easier. You can configure your router from anywhere in the world by using Linksys Smart Wi-Fi, but you can also configure your router directly from your home network.Linksys Smart Wi-Fi may be available for your mobile device, as well. See your device’s app store for information.Use Linksys Smart Wi-Fi to easily manage your router’s settings, such as: • Change your router’s name and password • Set up guest access • Configure parental controls • Connect devices to your network • Test your Internet connection speedYour Linksys Smart Wi-Fi account can also be used to manage multiple Linksys routers. For more information, see “How to associate a router with your Linksys Smart Wi-Fi account” on page 25.How to connect to Linksys Smart Wi-FiTo connect to Linksys Smart Wi-Fi:1. Open your computer’s web browser.2. Go to www.linksyssmartwifi.com and log into your account. If you can’t remember your password, click Forgot your password? and follow the on-screen instructions to recover it.
8Setting Up: BasicsLinksys EA-SeriesHow to disable remote accessIf you want to configure your router only while you are on your home network, you should disable remote access.To disable remote access:1. Log into Linksys Smart Wi-Fi.2. Under Router Settings, click Connectivity.3. Click the Administration tab, then deselect Allow remote access to Linksys Smart Wi-Fi.4. Click OK.How to connect directly to your routerYou can configure your router by directly accessing it on your home network instead of through the Internet-based Linksys Smart Wi-Fi.To connect to your router while you are on your home network:1. Open your computer’s web browser.2. Go to www.linksyssmartwifi.com and log into your router using the router password you created when you installed your router. (When there is no Internet connection, this address re-routes directly to your router.)How to improve your wireless connection speedFollow these tips to improve your network’s wireless connection speed: •Make sure that your router is in a good location: •For the widest coverage area, install your router near the center of your home, and near the ceiling, if possible. •Avoid placing the router on or near metal objects (such as file cabinets and metal furniture), reflective surfaces (such as glass or mirrors), or masonry walls. •Any obstruction can weaken the wireless signal (even non-metallic objects), so the fewer obstructions between the router and the wireless device, the better. •Place the router in a location away from other electronics, motors, and fluorescent lighting.
9Setting Up: BasicsLinksys EA-Series •Many environmental variables can affect the router’s performance, so if your wireless signal is weak, place the router in several locations and test the signal strength to determine the ideal position. •If possible, upgrade wireless network interfaces (such as wireless network cards in computers) from older wireless standards to 802.11n. If a wirelessly networked device uses an older standard, the performance of the entire wireless network may be slower. •If your router is a dual-band router, split your network traffic so the high-bandwidth traffic uses the 5GHz band. For more information, see “How to get the most out of your dual-band router” on page 26.How to change your network’s name and passwordYou can change the name (SSID) and password of your network, but if you do so, all wireless devices connected to your router will lose their Internet connection until you reconnect them using the new network name and password.To change your router’s name and password:1. Log into Linksys Smart Wi-Fi. (See ““How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Wireless.3. Click the Wireless tab, then click Edit. • To change the network name, type a new name in the Network name (SSID) box. • To change the network password, type a new password in the Password box.4. Click OK to apply your changes.TIPIf you have a dual-band router, each band (2.4 GHz and the 5GHz) can have a separate network name and password.How to change your router’s local access passwordYour router’s local access password was set when you ran the router’s setup software, but you can change it at any time. You need the router password to change router settings when you don’t have an Internet connection. When you do have an Internet connection, log into your Linksys Smart Wi-Fi account by following the directions under “How to connect to Linksys Smart Wi-Fi” on page 7.To change your router’s local access password1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click Connectivity under Router Settings.
10Setting Up: BasicsLinksys EA-Series3. Click the Basic tab.4. Under Router Password, type the new password, then click OK. How to change your router’s time zoneYour router’s time zone should be set to your local time zone. To set your router’s time zone:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click Connectivity under Router Settings. 3. Click the Basic tab, then select your time zone in the Time Zone drop-down list and click OK. How to test your Internet connection speedNOTETo run the speed test, you must be accessing the Internet by using the router you are testing. You cannot run the speed test remotely.To test your Internet connection speed:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click Speed Test under Apps. The Speed Test screen opens.3. Click Begin Test. The test measures your download and upload speeds.
11Setting Up: BasicsLinksys EA-SeriesNOTEInternet connection speeds are determined by a variety of factors, including ISP account type, local and worldwide Internet traffic, and number of devices in your home that are sharing the Internet connection.4. Click Restart Test to run it again, and click Show History to display the results of past tests. How to connect devices to your networkYour Linksys router is the nerve center of your home network. Your router safely opens the Internet to your network, and all of your computers and network devices rely on your router to pass files, media, and network commands in an organized, error-free way. Whether connected wirelessly or with cables, each part of your network needs the router in order to work reliably with the other parts of your network.How to connect a computer to your networkTo connect a computer to your network:1. At the computer you want to connect, enter your network’s connection information into your wireless manager.2. After that computer connects to your network, log into Linksys Smart Wi-Fi, then click Device List to confirm that your router recognizes the new computer. You can use the Device List to monitor all network-attached devices.How to connect a USB printerWhen you install a printer that requires a cable, you can: •Follow the printer’s instructions for setting it up, then follow your computer’s operating system instructions to share the printer with your network.- OR - •You can connect a USB printer to the router’s USB port to make the printer available to any networked computer.When you set up a wireless printer, you need to make sure that: •Your printer has been completely set up except for being connected to the network. •Your printer supports the WPA/WPA2 wireless encryption standard. •If your wireless printer supports Wi-Fi Protected Setup, you should use Wi-Fi Protected Setup to connect the printer to your network. See “How to connect a network device using Wi-Fi Protected Setup” on page 12.To connect a USB printer to your network through the router’s USB port:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click Device List, then click Add a Device.
12Setting Up: BasicsLinksys EA-Series3. Under Select the type of device to add to your network, click USB Printer. The Add a USB printer screen opens.4. Follow the on-screen instructions for downloading and installing the VUSB (virtual USB) software for your computer.To connect a wireless printer to your network:1. Follow the printer’s instructions to connect it to your network. Use the connection information available in Linksys Smart Wi-Fi or saved to your computer desktop.2. After that printer connects to your network, log into Linksys Smart Wi-Fi, then click Device List to confirm that your router recognizes the new printer.How to connect other devicesMany other types of wireless network devices can connect to your home network, including: •Game consoles •Internet-capable TVs and media players •Digital music players •Smart phonesBecause of the wide variety of devices and methods of connecting, you must manually enter network information into the devices for a successful network connection. TIPFor more instructions on connecting a game console to your network, see also:• “How to optimize your router for gaming and voice” on page 34• “How to set up port forwarding” on page 43• “How to set up port range triggering for online gaming” on page 45How to manually connect a network deviceTo manually connect a device to your network:1. Follow the device’s instructions to connect it to your network. Use the connection information available in Linksys Smart Wi-Fi or saved to your computer desktop.2. After the device connects to your network, log into Linksys Smart Wi-Fi, then click Device List to confirm that your router recognizes the new device. How to connect a network device using Wi-Fi Protected SetupTo connect a device using Wi-Fi Protected Setup™:1. Plug in and turn on the network device. If the device does not support Wi-Fi Protected Setup, follow its instructions for a standard network installation.2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Wireless, click the Wi-Fi Protected Setup tab.4. Use one of the following methods to complete the setup:
13Setting Up: BasicsLinksys EA-Series • If the device has a Wi-Fi Protected Setup button, press that button, then click the Wi-Fi Protected Setup button in Linksys Smart Wi-Fi or press the button on the back of your router. • If the device has a Wi-Fi Protected Setup PIN, type that number into the Device PIN box in Linksys Smart Wi-Fi, then click Register. • If the device’s own setup asks for the router’s Wi-Fi Protected Setup PIN, enter the number that appears under Router PIN in Linksys Smart Wi-Fi.How to view device detailsYou can use Linksys Smart Wi-Fi to view any network device’s network infomation. To view network device details:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Apps, click Device List. The Device List screen opens.3. Click the i in the lower-right corner of the device.
14Setting Up: BasicsLinksys EA-SeriesInformation about the device appears on the screen.4. Click OK.How to set up parental controlsWith your router, you can use parental controls to: •Set the times that Internet access is allowed. •Block websites that you specify or based on their content. •Set the above restrictions for specific computers.TIPWhen someone tries to open a blocked website, a Linksys Smart Wi-Fi login page appears. To view the blocked content, you must log into your Linksys Smart Wi-Fi account and change the parental control restrictions.How to set parental controlsTo set parental controls:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Apps, click Parental Controls. The Parental Controls screen opens.3. To turn on parental controls, click the Enable parental controls button so that ON is displayed.TIPIt’s not necessary to set parental controls over each computer on your home network. You can set the controls on only those computers that children can access.4. To select a computer to apply parental controls to, click the name of the computer in the Restrict Internet access on list.5. To block Internet access on the selected computer(s), under Block Internet access: • Click Never to allow Internet access. • Click Always to always block Internet access. • Click Specific Times to set the times when Internet access is allowed.
15Setting Up: BasicsLinksys EA-Series • Click Edit to change the Internet access schedule. You can click and drag to select or deselect a block of time.6. To block specific websites:a. Under Block specific sites, click Add. b. Type the web address (URL) of the website to block, then click OK. You can block up to ten websites.TIPIt’s easier to copy and paste a web address than it is to type it in. Copy the address from your browser’s web address box, then paste it into an available box in the Block Specific Sites screen of Linksys Smart Wi-Fi.7. Click OK to apply your changes.How to configure your guest networkYou can use your router’s guest network to provide your guests with access to the Internet, while restricting their access to other resources on your local network. To prevent unauthorized users from using your Internet access, your guest network requires that a password be entered for Internet access. The guest network is enabled by default.web browser - guest access login - Linksys E4200 http://mynetwork/guest/loginEnter the Guest Passwordfor Internet Access:LoginX_DoneFile Edit View Go Shortcuts Options HelpXhttp://mynetwork/guest/loginEnter the Guest Passwordfor Internet Access:LoginGuest NetworkLocal NetworkLocal Access and Guest Access DiagramYour wireless network’s guest network and password were set when you ran the router’s setup software, but you can change them at any time.
16Setting Up: BasicsLinksys EA-SeriesTo set up guest access to your network:1. Log into Linksys Smart Wi-Fi. (See ““How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Apps, click Guest Access. Your guest network, which was set up during your router installation, is displayed. • To turn guest access on or off, click the Allow guest access button. • The guest network name is based on your 2.4GHz network name and is automatically generated. • To change the guest network password, click in the box next to Guest network password, then type the new password. • To change the number of simultaneous guest network users you want to allow, click the drop-down box under Total guests allowed, then click the number that you want.TIPTo keep your guest network secure, click Change to change the guest password when the guest no longer needs access to the account.3. Click OK to apply your changes.TIPThe first time your guest tries to access the Internet through a web browser, they will see the Guest access screen. To continue, they must enter the password you provided in the Password field, then click LOGIN.How to back up your router configurationWhen you are done setting up your router, you should back up its settings so that you can restore them later, if necessary. For instructions, see “How to back up and restore your router configuration” on page 47.
17Setting Up: BasicsLinksys EA-SeriesHow to customize Linksys Smart Wi-FiYou can customize your Linksys Smart Wi-Fi home page by adding or removing widgets. Widgets are miniature versions of menus that let you change basic settings or check the status of your network.Using widgetsTo add a widget:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Open a menu, then select Show widget on the homepage in the upper-right corner.To remove a widget:1. On the home page, click the × in the upper-right corner of the widget you want to remove.Customizing the Device ListYou can change the icon and text description of each device on your network.To change the device appearance:1. In the Device List, click the device you want to change the appearance for. The device’s information screen opens.2. To change the description, click Edit, type the new name, then click OK.3. To change the icon, click Change, click a new icon, then click OK.
18 Linksys EA-Series18OverviewYou can attach most USB drives (including a thumb drive or a high-capacity external drive) to the USB port on your router. You can then use the drive as networked storage, as a media server (for media-enabled devices such as a networked TV), and as an FTP (File Transfer Protocol) server. You can also specify which users can access the content on the drive. Menus are subject to change.To view the status and settings of your attached drive:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click USB Storage under Apps. The Status tab displays information such as: • Drive capacity and use • Secured folder access status • Addresses for accessing shared folders, the FTP server, and media serverHow to attach a USB driveIf a USB drive is already connected to the router, and you want to attach a different drive to that USB port, you should safely disconnect the old drive first. To safely remove a USB drive from the router:1. Log into Linksys Smart Wi-Fi, then click USB Storage under Apps.2. In the Status tab, click Safely remove drive.3. Disconnect the old drive from the router.To attach a USB drive to the router:1. Connect the USB drive to an available USB port on the back of your router. Your router detects the drive.2. To update the USB Storage screen, you may need to click Refresh.Using an External Drive
19 Linksys EA-SeriesHow to use secured folder accessWhy would I need to use secured folder access? By default, when you connect a USB drive to your router, the entire contents of the drive are available for read and write access to anyone on your local network (no login credentials are required). However, you can also make the drive and its folders secure, so that only authorized users can access the drive’s contents.TIPWhen Secure Folder Access is on, the entire USB drive is secured.How to set up authorized users and shared foldersTo enable access to shared folders:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click USB Storage under Apps, then click the Folder Access tab.3. Click the setting for Secure Folder Access to turn it on. The Authorized users list appears.4. In the Authorized users list, type a Username and Password for each new user.TIPTwo accounts, Admin and Guest, are already set up and cannot be deleted.5. Select the permissions to give the user. • Read Only lets the user read (open) the file. • Read & Write lets the user read, rename, overwrite, or delete the file. The user can also save new files to the folder.6. Click Select Share. The Select Existing Share dialog box opens.7. If you already have the shared folder set up:a. Select the check box next to each share you want to grant access to, then click OK.
20 Linksys EA-Series8. If you need to set up the shared folder:a. Click Create new share. The Create New Share dialog box opens.b. Click the button next to the folder that you want to share. • To view subfolders, click the icon next to the folder name. • To return to a parent folder, click the icon at the top of the list. • To select the entire drive, select Share entire storage device.TIPS • The share name automatically changes to the name of the folder you selected. • You cannot select more than one folder for each share. • To use a different share name, type the name in the Share name field.c. Click OK.d. Select the check box next to each share you want to grant access to, then click OK.9. Click Add User.10. In the Authorized users list, you can also: • Click Edit to change a user’s credentials. • Click Shares to change the shares that a user can access. • Click Delete to delete the user account.How to access shared foldersTo access shared folders while on your network:1. While in Linksys Smart Wi-Fi, click USB Storage under Apps.2. In the Status tab, note the information under Folder Access. This is the address you will need to access the shared folders from a file manager.3. Enter the access address into your file manager. TIPYou can also usually locate the folder by browsing through your computer’s file manager.4. Enter your user account name and password. The drive’s contents (files and folders) appear in a window. 5. Use the file manager to open, copy, or view the folder’s contents.
21 Linksys EA-SeriesTIPSFile managers display content in many ways, but you can usually use these common actions to navigate through folders: • Click or double-click a folder name to open it. • Click, double-click, or right-click a file to open, copy, or view it. • Drag a file from another window and drop it into the shared folder’s window to copy it to the shared folder. (To copy a file to the shared folder, your user account must have write access.)How to set up your router as a media serverWhat is a media server and how would I use it? A media server lets you share media content across your network. Your router can act as a media server if it has a USB drive attached and if you have UPnP AV (Audio and Video)-enabled or DLNA (Digital Living Network Alliance)-certified devices in your home. Examples of UPnP AV-enabled devices include digital media players, gaming consoles with a built-in media player, and digital picture frames.For example, if you have a digital media adapter that sends content to your entertainment system, and if your router’s set up as a media server, then the digital media adapter can access your router’s attached USB drive.You can specify which folders are used by the media server, add and delete folders, and specify how often the folders are scanned for new content. NOTEThe EA3500 does not support the media server feature.To configure your router as a media server:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click USB Storage under Apps. The USB Storage screen opens.3. Click the Media Access tab.4. Click the setting for Enable Media Server to turn it on.
22 Linksys EA-Series5. Click Add New Folder. The Add a new folder dialog box opens.6. Click the button next to the folder that you want to share, then click OK. • To view subfolders, click the icon next to the folder name. • To return to a parent folder, click the icon at the top of the list.TIPS • The share name automatically changes to the name of the folder you selected. • You cannot select more than one folder at a time.7. Click OK again to save changes.How to connect your UPnP device to the media serverAfter you set up your router’s media server, you need to connect an UPnP-compatible device (such as an UPnP-compatible game console or digital media player) to the network so that you can play the media server’s content.To connect an UPnP device to your router’s media server:1. Connect your UPnP device to your home network with wired (Ethernet cable) or wireless networking. If you are connecting wirelessly, you need to know your network’s name and password. See your device’s documentation for help. 2. On your UPnP device, change the media source to the media server name you specified on your router. (See “How to set up your router as a media server” on page 21)3. See your UPnP device’s documentation for help with playing media on the device.How to remotely access storageWhy would I need to access my router’s storage remotely? After you enable the router’s FTP (File Transfer Protocol) server, you can access the attached drive’s files from anywhere by using either a web browser or FTP software. To set up the FTP server:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Click USB Storage under Apps. The USB Storage screen opens.3. Click the FTP Server tab.
23 Linksys EA-Series4. Click the setting for Enable FTP Server to turn it on.5. We recommend that you keep the default settings for FTP Port and Encoding, unless you are an advanced user and have reason to change them.6. Click OK.7. Click the Status tab. 8. Note the information under FTP Server. This is the information you will need to access the attached storage remotely.9. To access the attached storage using a web browser:a. Open a web browser.b. In the browser’s Address or URL field, type the address that was provided on the Status tab above, starting with ftp://... If you have DDNS (Dynamic Domain Name Service), you can use your router’s domain name instead.c. Enter your user account name and password. This is the same User Name and Password that were set up in the shared folders Authorized users list. See “How to set up authorized users and shared folders” on page 19.The drive’s contents (files and folders) appear in a browser window.d. Click a file to download it to your computer, or click and drag a file from your computer’s file manager to the browser window to upload a file (only if you have read and write access).10. To access the attached storage using FTP client software:a. Run your FTP client software.b. Refer to the software’s help to determine how to connect to an FTP site. Use the following information to connect: • The address that was provided on the Status tab above, starting with ftp://... If you have DDNS (Dynamic Domain Name Service), you can use your router’s domain name instead. • The user account name and password. This is the same User Name and Password that were set up in the shared folders Authorized users list. See “How to set up authorized users and shared folders” on page 19. • The port and encoding specified during your FTP server setup (usually port 21, and UTF-8 encoding)c. Refer to the software’s help to determine how to download and upload files.TIPSFTP software and web browsers display FTP content in many ways, but you can usually use these common actions to navigate through FTP folders: • Click a folder name to open it. • Click a double period (..) or Up to a higher level directory to open a parent folder. • Click or right-click a file to download or view it. • Drag a file from another window and drop it into the FTP window to upload it. (To upload a file, your user account must have write access.)
24Setting Up: AdvancedLinksys EA-Series24How to manually set up your routerAlthough running your router’s setup software is the easiest way to set up and maintain your router, advanced users may want to manually configure their router. Be careful when changing settings using this method.To manually set up your router:1. Connect your router’s power adapter to a power outlet.2. To connect to your router by using a cable:a. Connect an Ethernet cable to the computer and to an available numbered Ethernet (blue) port on the back of your router.b. Disconnect the cable from the router’s Internet port.3. To connect to your router wirelessly:a. Make sure that your computer’s wireless networking is turned on.b. Connect to the secure wireless name shown in the Quick Start Guide that came with your router. (You can change the network name and password later during router setup.) If you need help connecting to the network, refer to your device documentation.4. Open a web browser on the computer, then go to www.linksyssmartwifi.com. (When there is no Internet connection, this address re-routes directly to your router.)5. Click I have read and accepted the License Terms for using this software, read the license agreement, then select the checkbox.6. Select I want to skip Setup and and configure my router manually, then click Next.7. Enter admin as the user name, then enter the default password (admin). The main menu opens.8. After you finish changing settings, click Save and close the browser window.TIPFor descriptions of the settings, click Help at the top of the screen.How to manually set up your Internet connectionRunning Setup configures your router’s Internet connection. However, for some ISPs (Internet Service Providers), especially those outside of the United States, you may need to manually configure your router’s Internet connection.How to configure basic Internet connection settingsTo manually configure your router’s Internet connection:1. Connect to your router and log in using the instructions under “How to manually set up your router” on page 24.2. Under Router Settings, click Connectivity. The Connectivity page opens to the Basic tab.3. Next to Type of Internet Connection, click Edit. Setting Up: Advanced
25Setting Up: AdvancedLinksys EA-Series4. Select your ISP’s Internet connection type from the drop-down list. Complete the Optional Settings only if required by your ISP.TIPFor field descriptions, click Help at the top of the screen.5. Click OK.IPv6 Internet connection settingsIPv6 is a new IP protocol that uses simplified packet headers and requires IPSec. It also has improved support for mobile IP and computing devices.NOTETo use your router’s IPv6 Internet connection settings, IPv6 service from your ISP (Internet service provider) is required. For more information on this service, ask your ISP.To manually configure your router’s IPv6 settings:1. Use an Ethernet cable to connect an Ethernet port on your router to the Ethernet port on your computer.2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Router Settings, click Connectivity. The Connectivity page opens.4. Click the Internet Settings tab, then click IPV6.5. Click Edit. You can now change the following settings: • IPv6 - Automatic—Select Enabled to use IPv6 for all network addressing. • DUID (device user ID)—Used by DHCP to identify network clients. • 6rd Tunnel—Allows your router to send IPv6 IP addresses over IPv4 networks. To enable this option, IPv6-Automatic must be unselected. To let your router handle the 6rd Tunnel settings (such as prefixes and address masks), change the 6rd tunnel setting to Automatic. Select Manual to change these settings manually. • Prefix—Enter the prefix address used for the tunnel provided by your ISP. • Prefix Length—Enter the prefix length used for the tunnel provided by your ISP. • Border Relay—Enter the border relay address used for the tunnel provided by your ISP. • IPv4 mask length—Enter the IPv4 address mask length used for the tunnel provided by your ISP.6. Click OK.How to associate a router with your Linksys Smart Wi-Fi accountTo associate an additional router to your Linksys Smart Wi-Fi account:1. Run Setup for the additional router. When Setup is complete, you are prompted to create a new Linksys Smart Wi-Fi account.2. Instead of creating a new account, click Login at the top of the screen. You are prompted to enter your account user name (e-mail address) and password.3. Enter your original Linksys Smart Wi-Fi account user name and password, then click Login. The additional router is added to your Linksys Smart Wi-Fi account.4. To configure the additional router, log into Linksys Smart Wi-Fi, then select the router’s SSID (network name) from the drop-down list at the top of the screen.
26Setting Up: AdvancedLinksys EA-SeriesHow to get the most out of your dual-band routerI bought a dual band router, but I’m not sure that I’m getting the most out of it. What should I check? Of the many reasons for owning a dual-band router, the most common is to ensure available bandwidth for streaming high-definition video. At the same time, owners want to make sure that their video streams won’t be interrupted by other wireless network traffic. To get the most out of your dual-band router, you can: •Upgrade your wireless clients •Split your trafficUpgrade your wireless clientsIf you have network adapters that support only legacy wireless network standards such as 802.11b, you should consider upgrading them with Wireless-N (802.11n) network adapters. Wireless-B (802.11b) devices can slow your entire wireless network. For the best performance, all of your wireless devices should support Wireless-N. You can then select Wireless-N Only as your Network Mode below.NOTEIf you select Wireless-N Only, you may need to temporarily change your network settings to Mixed to provide access to guests without Wireless-N networking.Split your trafficThe best way to improve your multimedia wireless performance is to split your wireless traffic between your router’s two bands (ranges of radio frequencies). Your router supports the 2.4 GHz band and the 5 GHz band, and handles the two bands as two separate wireless networks to help manage the traffic.The most common way to split wireless traffic is to use the 2.4GHz band for basic Internet tasks such as web browsing, email, and downloads, and use the 5.0GHz band for streaming multimedia. There are several reasons for this approach: •Although the 2.4GHz band may be more crowded with wireless traffic from your neighbors, it’s fine for basic Internet traffic that is not time-sensitive (such as e-mail). •Even though you are connected to your own wireless network, you are still sharing “air time” with nearby networks. •The 5GHz band is much less crowded than the 2.4 GHz band, so it’s ideal for streaming multimedia. •The 5GHz band has more available channels, so it is more likely that you will have your own, interference-free channel for your wireless network.By default, your dual-band router uses the same network name on both the 2.4GHz band and the 5GHz band. The easiest way to segment your traffic is to rename one of your wireless networks. With a separate, descriptive name, it will be easy to connect to the right network. To reconfigure your wireless network:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Wireless. The Wireless page opens to the Wireless tab.3. Click Edit next to the network band you want to modify. Change any of the settings below:a. Enabled—Deselect this checkbox to disable the network band.b. Network name (SSID)—You can provide a unique SSID for each band of your wireless network. The name must not exceed 32 characters.c. Password—You can provide a unique password for each band of your wireless network.
27Setting Up: AdvancedLinksys EA-Seriesd. Network mode—Your choice depends upon the clients that will connect to your network. If all of your devices are Wireless-N capable, you can select Wireless-N Only for either or both bands.On the 2.4 GHz band, you can select: •Mixed •Wireless-N Only •Wireless-G OnlyOn the 5 GHz band, you can select: •Mixed (default), which accepts connections from 802.11a or 802.11n clients •Wireless-N Only (802.11n only) •Wireless-AC Onlye. Security mode—You can set up different security options for the 5GHz and 2.4GHz networks. If the security mode you select requires a passphrase, a Passphrase field appears, and you must enter a passphrase. You can select: •None (no security) •WEP •WPA Personal •WPA Enterprise •WPA2 Personal •WPA2 Enterprise •WPA2/WPA Mixed Personal •WPA2/WPA Mixed EnterpriseTIPWireless-N networks should use the WP2-Personal security mode for best performance.f. Channel width—We recommend that you keep the default (Auto) setting for each band. In Auto mode, the router and the network clients automatically switch to the 40MHz mode if: •Your wireless clients support the 40 MHz mode (sometimes called Bonded mode) in which two 20MHz channels are bonded together for better performance. •There is no adjacent interference.With more available channels and less chance of interference on the 5GHz band, you have the option to force the 40MHz mode. On the 2.4GHz band, you can select: •Auto (20 MHz or 40 Mhz) •20 MHz Only On the 5GHz band, you can select: •Auto (automatically selects from the options below) •20 MHz Only •40 MHz Only •80 MHz Onlyg. Channel—Choose the operating channel for each band. Your router will automatically select the channel with the least amount of interference if you leave the default Auto setting. We recommend keeping the default settings for both bands.4. To save your changes, click OK.How to control access to your networkWhy would I need to control access to my wireless network? By default, Setup enables industry-standard WPA (Wi-Fi Protected Access) security using WPA2/WPA mixed mode. If you set up your wireless network manually and have not enabled wireless security, your wireless network will be an “open” network that almost anyone nearby with a Wi-Fi-enabled device could access. What is MAC filtering? If you choose not to use the built-in security features of your router, you can still control access to your wireless network using MAC filtering. Every network device has a unique, 12-digit MAC (Media Access Control) address. Using MAC filtering, you can allow only known MAC addresses (known devices) onto your network. You can also exclude specific MAC addresses or deny them access to your wireless network.TIPMAC filtering is not strong security. The best way to secure your network is to use the router’s WPA2 security setting.
28Setting Up: AdvancedLinksys EA-SeriesExample: Because each MAC filtering configuration is unique, the following procedure uses the simplified example of setting up MAC filtering to allow one wireless device access to the network.TIPYou can also use MAC filtering to prevent specific PCs from accessing your network by selecting Deny. However, it’s easier to select Allow to permit only known devices than to exclude unknown devices.To set up MAC filtering to allow one wireless device access to your network:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Wireless. The Wireless page opens.3. Click the MAC Filtering tab.4. Select Enabled next to MAC Filters, then select Allow access for ONLY the listed MAC addresses.5. Click Add MAC Address, then enter the MAC address into the MAC Filter List and click Save.
29Setting Up: AdvancedLinksys EA-SeriesHow to improve security using the built-in firewallWhy would I need to change my security settings? By default, the firewall settings in your router have been optimized for most home environments, so no changes are needed. The SPI (Stateful Packet Inspection) firewall is enabled by default. In addition, anonymous Internet requests and IDENT requests are filtered by default. All web filters are disabled, because enabling them may cause problems for sites that depend on ActiveX controls, Java, or cookies.Changing firewall settingsTo change your firewall settings:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Security. The Security page opens to the Firewall tab.3. You can now change the following settings:TIPFor more descriptions of each setting, click Help at the top of the screen. •Firewall: SPI firewall protection—This helps protect your local network from Internet threats. This option is enabled by default. On some router models, this setting is separated into IPv6 and IPv4 options so that each can be handled separately.CAUTIONTo help protect your network, you should keep this option enabled. •VPN Passthrough: • IPSec Passthrough – IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange of packets at the IP layer. The VPN clients on the local network can establish an IPSec VPN tunnel through the router. This option is enabled by default. • PPTP Passthrough – PPTP (Point-to-Point Tunneling Protocol) allows the PPP (Point-to-Point Protocol) to be tunneled through an IP network. The VPN clients on the local network can establish a PPTP VPN tunnel through the router. This option is enabled by default. • L2TP Passthrough – L2TP (Layer 2 Tunneling Protocol) enables point-to-point sessions using the Internet on the Layer 2 level. The VPN clients on the local network can establish an L2TP VPN tunnel through the router. This option is enabled by default. •Internet filters: • Filter anonymous Internet requests—This filter blocks Internet requests from unknown sources such as ping requests. This option is enabled by default. • Filter multicast—Multicasting allows a single transmission to simultaneously reach specific recipients within your local network. Select this option to block multicasting. This option is disabled by default. • Filter Internet NAT redirection—This filter prevents a local computer from using a URL or Internet IP address to access the local server. Select this option to enable the filter. This option is disabled by default. On some router models, this setting applies to IPv4 Internet only. • Filter ident (Port 133)—This filter prevents port 133 from being scanned by devices from the Internet. This option is enabled by default.4. Click Save to save your changes.
30Setting Up: AdvancedLinksys EA-SeriesChanging IPv6 firewall settingsOn some router models, the IPv6 firewall lets you customize IPv6 port services for applications. When users send these types of requests to your network via the Internet, the router will allow those requests to the appropriate computers.NOTETo use your router’s IPv6 Internet connectino settings, IPv6 service from your ISP (Internet service provider) is required. For more information on this service, ask your ISP.To set IPv6 firewall settings:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Security. The Security page opens to the Firewall tab.3. Click Add IPv6 Firewall Setting. You can now change the following fields: •Description—Enter a description of the application. •Protocol—Select TCP, UDP, or Both (default). •IPv6 Address—Enter the IPv6 address of the computer that should receive the traffic. •Allow—Select the range of port(s) used by incoming traffic.4. Click Save to save your changes. The list is updated to show the settings you have saved. • To change a saved setting, click Edit next to the setting. • To delete a saved setting, click Remove next to the setting.How to set up the DHCP server on your routerYour router can be used as a DHCP (Dynamic Host Configuration Protocol) server to automatically assign an IP address to each computer or device on your network. The DHCP server is enabled by default. If you already have a DHCP server on your network, or if you do not want to use your router as a DHCP server, you should disable this setting. To configure your router’s DHCP server settings:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity.
31Setting Up: AdvancedLinksys EA-Series3. Click the Local Network tab. 4. To disable the DHCP server, deselect the Enabled checkbox.5. Leave the Enabled checkbox selected to edit the following settings: •Start IP address •Maximum number of users •IP address range (not editable) •Client lease time •Static DNS values •WINS6. Click OK to save changes.How to set up DHCP reservationWhy would I use it? DHCP reservation allows you to assign a unique, fixed IP address to a specific device on your network. Assigning a fixed IP address is a good way to manage devices such as print servers, web cameras, network printers, and game consoles. A fixed IP address is also recommended if you want to use port forwarding for devices that need to receive inbound traffic from the Internet (“How to set up port forwarding” on page43). To configure DHCP reservation:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity.3. Click the Local Network tab, then click DHCP Reservations. The DHCP Reservations list opens, which lists attached network devices and current DHCP reservations.4. Click the Select checkbox next to the device you want to reserve, then click Add DHCP Reservation.
32Setting Up: AdvancedLinksys EA-Series5. Click Edit to change the reservation details, or click Delete to delete the reservation.TIPFor field descriptions, click Help at the top of the screen.How to access your network on the InternetWhy would I need to find my network on the Internet? If you want to remotely access a drive attached to your router or view a web camera on your home network, you need to be able to easily enter your network’s address into a web browser.Working with several DDNS (Dynamic Domain Name System) service providers, your router’s DDNS feature lets you configure a domain name for your network, which you can then use to easily find your network on the Internet. If your ISP changes your network’s IP address (which can happen frequently), the DDNS service providers detect the address change and continue to route your domain name to that address.TIPBefore you configure DDNS on your router, you must sign up for DDNS service from a DDNS service provider that’s supported by your router.To set up DDNS:1. Sign up for DDNS service at either www.dyndns.org or www.tzo.com. Note all of the information provided to you by the DDNS provider.2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Router Settings, click Security, then click the Apps and Gaming tab. The DDNS screen opens.4. In the DDNS Service drop-down list (the list that has Disabled selected by default), select your DDNS service provider.5. Complete the fields with information provided by your DDNS provider, then click OK.6. To access the network from the Internet, enter the domain name provided by the DDNS service provider.To access one of your network devices on the Internet:a. Configure the router to use port forwarding for the device (see “How to set up port forwarding for a single port” on page43). Note the port number used for the device.b. Enter the domain name for your network, followed by a colon and the port number. For example, if the domain name registered with your DDNS provider is HappyBunny.linksysnet.com, and your Internet camera has been configured to use port 1024, you would enter: HappyBunny.linksysnet.com:1024
33Setting Up: AdvancedLinksys EA-SeriesHow to clone a MAC addressOn any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem. If your computer’s MAC address is registered with your ISP and you do not want to re-register the MAC address, then you can clone the address (assign the registered MAC address of your previous device to your new router). If you want to use the MAC address from an old router that you are replacing with your new router, you should first determine the MAC address of your old router, then manually enter it into your new router.NOTEFor many ISPs that provide dynamic IP addresses automatically, the stored MAC address in the modem is reset each time you reset the modem. If you are installing this router for the first time, reset your modem before connecting the router to your modem. To reset your modem, disconnect power for about one minute, then reconnect power.To clone a MAC address from your computer:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity. The Connectivity page opens.3. Click the Internet Settings tab.4. Under MAC Address Clone, click Enabled.5. Enter the 12-digit MAC address of your old router, then click OK.How to connect to your corporate office using a VPNWhat is a VPN, and do I need to change my router settings? A VPN (Virtual Private Network) is a network that uses a public network, such as the Internet, to provide secure communications between a remote computer and another network. Corporations often provide VPN access to their networks to enable employees to work from remote offices or while traveling. Most corporate VPNs use the Internet to provide connectivity between remote employees and the corporate network. For a typical VPN, the corporation installs a VPN gateway on their corporate network. Employees authorized to work remotely connect to the VPN gateway through the Internet using VPN software and security methods provided by their employers. Robust security and authentication schemes ensure a secure connection and access by only authorized users.The default VPN settings in your router have been configured to pass through (allow) the most common types of VPN protocols, so usually no changes are needed. To change your VPN passthrough settings:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Security. The Security page opens to the Firewall tab.
34Setting Up: AdvancedLinksys EA-Series3. Enable each setting that you want to change. •IPSec Passthrough – IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange of packets at the IP layer. The VPN clients on the local network can establish an IPSec VPN tunnel through the router. This option is enabled by default. •PPTP Passthrough – PPTP (Point-to-Point Tunneling Protocol) allows the PPP (Point-to-Point Protocol) to be tunneled through an IP network. The VPN clients on the local network can establish a PPTP VPN tunnel through the router. This option is enabled by default. •L2TP Passthrough – L2TP (Layer 2 Tunneling Protocol) enables point-to-point sessions using the Internet on the Layer 2 level. The VPN clients on the local network can establish an L2TP VPN tunnel through the router. This option is enabled by default.4. Click OK to save your changes.How to optimize your router for gaming and voiceHow does my router prioritize traffic to the Internet? Your router can prioritize traffic between your network and the Internet. Performance for demanding, real-time applications, such as online gaming, VoIP calls, video streaming, and videoconferencing, can be improved by configuring media prioritization.Prioritization settings are applied only to traffic that is uploaded to the Internet. The router cannot control the quality of the traffic after it reaches the Internet.TIPFor more information on optimizing your router for online gaming, see “Port Forwarding and Port Triggering” on page43.To configure media prioritization:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Apps, click Media Prioritization. The Media Prioritization screen opens.3. Turn on Prioritization if it is not already on.4. Click and drag high-priority devices from the Normal Priority list to the High Priority list.
35Setting Up: AdvancedLinksys EA-Series5. To prioritize an application or game, select the name in the drop-down list, then click and drag the icon next to the name to the High Priority list. • If the application name isn’t listed, click Edit and add the name. TIPIf you want to add a new application or game, you need to know its port and protocol information (see the application or game’s documentation for help).6. Click Settings. The Settings screen opens.a. Set the maximum Downstream Bandwidth. If you set the bandwidth lower than the actual bandwidth of your router, performance may be limited.b. Set the maximum Upstream Bandwidth.c. To help manage traffic priority with devices that support WMM, turn on WMM Support.TIPWMM (Wi-Fi MultiMedia) Support is a wireless feature based on the IEEE 802.11e standard. WMM improves quality for audio, video, and voice applications by prioritizing wireless traffic. This feature requires that the wireless client devices in your network also support WMM.d. To have the router re-send data if an error occurs, turn off No Acknowledgement. CAUTIONIf you specify a maximum bandwidth that is too high, the router cannot apply priorities correctly, and prioritization problems may result.e. Click OK.How to enable Voice over IP on your networkDo I need to configure Voice over IP? VoIP (Voice over Internet Protocol) is a technology for using the Internet as an interface for telephone communications. To use VoIP, you need to get an account with a VoIP service provider. The VoIP service provider typically provides you with a telephone adapter that connects to your network. If you do not use your network to make phone calls, you don’t need to change the default settings.The Application Layer Gateway SIP (Session Initiation Protocol) allows SIP packets, used by some VOIP service providers, to get through your router’s firewall.
36Setting Up: AdvancedLinksys EA-SeriesTo configure the router for VoIP:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity, then click the Administration tab.3. If your VoIP service uses SIP, select the SIP checkbox under Application Layer Gateway.– OR –If your VoIP service uses other NAT traversal solutions such as STUN (Session Traversal Utilities for NAT), TURN (Traversal Using Relay NAT), or ICE (Interactive Connectivity Establishment), deselect the SIP checkbox.NOTEYou may need to contact your VoIP service provider to determine the type of NAT traversal configuration they use.How to configure UPnPWhat is UPnP? UPnP (Universal Plug and Play) allows devices connected to a network to discover each other and automatically create working configurations. Examples of UPnP-capable devices include web cameras, online gaming applications, and VoIP devices. UPnP is enabled by default.To configure UPnP:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity, then click the Administration tab.3. To use UPnP, select Enabled (default) next to UPnP.4. To allow changing router settings while using UPnP, select Allow Users to Configure.5. To prevent local network users from disabling your Internet connection through UPnP, deselect the Allow users to disable Internet access checkbox.6. Click OK.
37Setting Up: AdvancedLinksys EA-SeriesHow to use a router as an access pointHow can I use this new router as an access point? If you have a large area to cover with your wireless signal, or if part of your home has weak signals due to interference, you can use this router to extend the range of your old router’s wireless network.To set up your new router as an access point:1. Use a network cable to connect this router’s Internet port to the Ethernet or LAN port on the router that is connected to your modem.2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Router Settings, click Connectivity, then click the Internet Settings tab.4. Click IPv4.5. For Type of Internet Connection, select Bridge Mode.6. Click Obtain an IPv4 address automatically, then click OK. The new router’s LAN IPaddress will be changed and obtained from the router that is connected to your modem.How can I use my old router as an access point? If you have a large area to cover with your wireless signal, or if part of your home has weak signals due to interference, you can use your old router to extend the range of your wireless network. This is a complex process, so this procedure assumes that you have some networking knowledge.TIPCheck the documentation for your old router. Some brands of routers include either a switch on the outside of the case or a software option to convert it to an access point. If either of these options is available, follow your old router’s instructions to convert it to an access point.You need to take note of your new router’s settings, then apply some of those settings to the old router so it can work as an access point.To view your new router’s settings:1. Make sure that your new router is connected to the Internet. 2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Router Settings, click Wireless, then take note of the Network name (SSID), Password, Security mode, and Channel.4. Under Router Settings, click Connectivity, then click the Local Network tab. Take note of the DHCP server’s IP address range (192.168.1.100 to 192.168.1.149 by default)To use your old router as an access point:1. With your computer connected to your old router, log into its browser-based administration utility. NOTESave your changes after finishing each step below.2. Open the setup page for the local network (LAN).3. In the Router IP address field, enter an unused IP address for the LAN network of your new router. For example, if your new router has an IP address of 192.168.1.1, you should choose an IP address on the 192.168.1.0 network. You can choose any address within the range of 192.168.1.2 to 192.168.1.254. You should exclude addresses in the range that will be used by the DHCP Server of your new router (192.168.1.100 to 192.168.1.149). A safe choice might be 192.168.1.250. Take note of this address, because this will be the address that you will use to manage your old router in the future.4. In the Subnet Mask field, enter 255.255.255.0 or, if available, select that subnet mask from a drop-down list.5. Disable the DHCP server on your old router. (Because your old router will be operating as an access point instead of a router, you don’t want it to distribute IP addresses. There should be only one active DHCP server on your network, and that should be your new router.)
38Setting Up: AdvancedLinksys EA-Series6. To reconfigure the wireless network on your old router:a. Open the wireless network setup page. b. Change the network name (SSID) to match the name of your new network. Having the same network name and security settings enables you to seamlessly roam between your new router and your old router.c. Change the security mode to match the security mode on your new router. d. Change the passphrase (sometimes called the pre-shared key) on your old router to match the passphrase on your new router.e. Change the wireless channel to a non-conflicting channel. Some manufacturers have an “Auto” function for channel selection that automatically selects a wireless channel that does not interfere with other nearby wireless networks. If your old router supports an Auto function, select that. Otherwise, you may need to manually select the wireless operating channel on your old router. In the 2.4 GHz wireless spectrum, there are only three non-overlapping channels: 1, 6, and 11. Pick a channel that does not overlap the operating channel of your new router. For example, if your new router is operating on channel 11, configure your old router for either channel 1 or channel 6.7. Connect an Ethernet network cable to one of the LAN/Ethernet ports on your old router and an Ethernet port on your new router.CAUTIONDo not connect the cable to the Internet port on your old router. If you do, you may not be able to set up the router as an access point on the current network.How to put your new router behind an existing routerWhy would I put my new router behind an existing router? There are several possible scenarios in which you might want to use your new router “behind” another router:1. You might be in an environment that shares the landlord’s Internet connection with all tenants. In this case, you should put your own router behind the landlord’s router in order to create your own private network and to isolate computers on your network from the rest of the building.2. You are sharing an office building Internet connection, and you want to control Internet access or the content viewed by your employees.3. You already have an existing network and you want to extend the network’s range or add wireless capabilities to your network.4. You want to separate older, less secure network devices from the rest of the network.To add your router to an existing router or gatewayIn most cases, you can easily add your router to an existing wireless network by running Linksys Smart Wi-Fi. If you are unable to set up the additional router using the instructions below, see “To share an Internet connection” on page39 or “To extend your network” on page41.To add your router to your existing wireless network:1. Connect your router’s Internet port to the LAN/Ethernet port on your existing (upstream) router or gateway.2. Connect to the secure wireless name shown in the Quick Start Guide that came with your router. (You can change the network name and password later during router setup.) If you need help connecting to the network, refer to your device documentation. Note: You will not have Internet access until router setup is complete.3. Open a web browser and follow the instructions to complete your router’s setup. If instructions do not appear in the web browser, enter linksyssmartwifi.com in the browser’s address bar.
39Setting Up: AdvancedLinksys EA-Series4. At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. NOTE:As part of the router setup process, you will be sent a verification e-mail. From your home network, click the link in the e-mail to associate your router with the Linksys Smart Wi-Fi account. Make sure that the link opens in a supported web browser, such as Internet Explorer 8 or higher, Firefox 8 or higher, Google Chrome 10 or higher, and Safari 5 (for Mac) or higher.To share an Internet connectionNOTEThis is a complex process, so this procedure assumes that you have some networking knowledge.To add another router to share an Internet connection:This topic covers cases one and two above1. Determine the IP address range for your upstream (office or building) network. To determine the address range by using a Windows computer:a. Connect your computer into your upstream network’s router.b. Click Start, Run, type CMD, then click OK. The command prompt window appears.c. Type ipconfig, then press Enter. TIPAlthough you can determine your computer’s IP address in many ways, this method is quick and relatively easy.d. Take note of the IP address. In this example, the IP address is 192.168.100.192.To determine the address range by using a Mac computer:a. Connect your computer into your upstream network’s router.b. From the Dock, click System preferences, click Network, then click Ethernet in the window to the left. A network status window opens.c. Take note of the IP address. In this example, the IP address is 192.168.100.139.Example: The above examples show that upstream IP addresses are on the 192.168.100.0 network. (The “0” indicates the entire network.) Your upstream network’s address may be different. The default address of your new Linksys router is 192.168.1.1. In setting up one router behind another, you must make sure that the local network on your new router is different than the network of your upstream router. In the above example, because the default local network on your Linksys router 192.168.1.0 is on a different subnet than the office network’s 192.168.100.0, you will be able to place your Linksys router behind the other router.
40Setting Up: AdvancedLinksys EA-Series2. Connect an Ethernet network cable to a LAN/Ethernet port on your upstream network to the yellow Internet port on your router. CAUTIONConnect the upstream network to your router’s yellow Internet port, not one of the blue Ethernet ports. If you connect to an Ethernet port, you create IP addressing problems for the office network.TIPSAn office network often has a wall plate with an Ethernet port that you can connect to. If you are doing this in a home environment (without wall ports), connect an Ethernet network cable between a LAN port on your upstream router and the Internet port on your Linksys router.3. Run your router’s setup CD on each computer that you want to connect to the Linksys router. Each computer needs either a wired or wireless connection to the Linksys router. For more information, see “How to connect a computer to your network” on page11.The computers that are connected to the Linksys router are now on the same network, and are isolated from the upstream network. However, you will still have access to the Internet through the upstream router (by way of your Linksys router). Because two routers are between your computer and the Internet, Internet traffic undergoes two network address translations. This is sometimes referred to as Double NAT.Your computers can also use the built-in capabilities of your Linksys router, such as parental controls. If you need further control over the type of content your employees or family access, you can create an account with an Internet filtering site such as www.opendns.com or www.bsecure.com. After you create an account with them, use their DNS in place of your ISP’s DNS. To use their DNS:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity.3. Click the Local Network tab. 4. Complete the Static DNS fields with the information provided by your content filtering provider.5. Click OK.
41Setting Up: AdvancedLinksys EA-SeriesTo extend your networkThis topic covers cases three and four above.NOTEThis is a complex process, so this procedure assumes that you have some networking knowledge.To extend your network or add wireless capabilities: 1. If you want to extend your network, you may also follow the instructions above. One example of this might be to provide a separate wireless network for your children to keep their wireless network traffic separate from your wireless network. You might also want to isolate one network from another network so that network shares aren’t visible across networks. In this case, use an Ethernet cable to connect the Internet port of the downstream router to one of the LAN ports of the upstream router. Make sure that the local network subnets on the two routers are different.- OR -You can extend your network by turning the downstream router into an access point. (See “How to use a router as an access point” on page37). When you use a router as an access point, computers connected to the access point are on the same IP subnet as all other devices connected to the router. File, printer, and media sharing is much easier if all devices are on the same subnet.How to expose a device to the InternetWhy would I expose a device to the Internet? If you are operating a web server, a mail server, or a web camera, you may want to expose that device to the Internet so anybody can access it. Your router includes a DMZ (Demilitarized Zone) feature that forwards all inbound ports presented on the WAN interface, except those that are specifically forwarded, to an individual IP address or MAC address. This feature is normally not used, because it presents significant security risks to the device that you designate for the DMZ. The DMZ device is not protected by the built-in firewalls, Internet filters, or router web filters, and is open to attacks from hackers. A much safer way of “exposing” devices to the Internet would be to use port forwarding. See “How to set up port forwarding” on page43.To set up a device in the DMZ:1. Configure your device with a static IP address. See your device’s documentation for help with setting a static IP address or use DHCP reservation (see “How to set up the DHCP server on your router” on page30).2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Router Settings, click Security, then click the DMZ tab.
42Setting Up: AdvancedLinksys EA-Series4. Click the setting for DMZ to turn it on.5. Select Enabled.6. In the Source IP Address section, select Any IP Address to allow access to your DMZ device from the entire Internet, or select the alternate button and enter a range of allowed source addresses.7. In the Destination IP Address section, enter the last three digits of the IP address of the device that will be in the DMZ. The rest of the IP address is already completed. - OR -If you want to specify the 12-digit MAC address of the device instead of setting up a DHCP address reservation, you can replace Step 6 with the following steps: a. In the Destination IP Address section, select MAC Address, then click View DHCP Client Table. The DHCP Client Table screen opens.b. Click Select next to the device that you want to place in the DMZ, then click Close. The corresponding MAC address is copied into the MAC Address field.c. Click OK.
43Port Forwarding and Port TriggeringLinksys EA-Series43How to set up port forwardingWhy would I use port forwarding? Port forwarding is a feature that forwards inbound traffic from the Internet on a specific port or ports to a specific device or port on your local network. You can set up port forwarding for: •A single port (see “How to set up port forwarding for a single port” below) •Multiple ports (see “How to set up port forwarding for multiple ports” on page 44) •A range of ports (see “How to set up port forwarding for a range of ports” on page 44)How to set up port forwarding for a single portWhy would I use port forwarding for a single port? Single port forwarding is a feature that forwards inbound traffic from the Internet on a specific port to a single device on your local network. An example of single port forwarding would be to forward inbound web requests, typically on port 80, to a web server. TIPSee the device’s documentation for port and protocol information.To set up single port forwarding:1. Follow your device’s instructions for configuring it with a static IP address or use DHCP reservation to assign it a permanent address (see “How to set up the DHCP server on your router” on page 30).2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Under Router Settings, click Security. 4. Click the Apps and Gaming tab.5. Click Single Port Forwarding. The Single Port Forwarding screen opens.6. Click Add a new Single Port Forwarding.7. In the Application name field, enter a descriptive name.8. In the External Port field, type the external port number (not always required).9. In the Internal Port field, type the internal port number (not always required).10. In the Protocol drop-down list, select TCP, UDP, or Both (default).11. In the Device IP# field, enter the last three digits of the IP address you have reserved for the computer you want to forward Internet traffic to. The rest of the IP address has already been completed for you. 12. Select Enabled, then click Save. If you don’t want to use port forwarding but want to keep the information in the table, unselect the checkbox.Port Forwarding and Port Triggering
44Port Forwarding and Port TriggeringLinksys EA-SeriesHow to set up port forwarding for multiple portsWhy would I set up port forwarding for multiple ports? Port forwarding is a feature that forwards inbound traffic from the Internet on a specific port to a single device on your local network. Unlike a web camera that typically only requires a single port to be forwarded, some applications require forwarding of multiple ports. VNC (Virtual Network Computing) software that allows you to operate your computer remotely from anywhere on the Internet is an example of an application that requires multiple ports to be forwarded. To forward to multiple ports, just create additional entries to forward additional ports to the same IP address.Example: You want to set up your computer so you can remotely access it using VNC software. By default, VNC uses TCP ports 5800 and 5900.To set up single port forwarding for multiple ports:1. Make sure that the software you want to use has been installed onto a networked computer.2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.3. Set up DHCP reservation for the IP address of the computer on which you installed the software. (See “How to set up the DHCP server on your router” on page 34).4. Under Router Settings, click Security. 5. Click the Apps and Gaming tab.6. Click Single Port Forwarding. The Single Port Forwarding screen opens.7. Click Add a new Single Port Forwarding.8. In the Application name field, enter a descriptive name.9. Enter in the same port number for the External Port and the Internal Port.10. In the Protocol drop-down list, select TCP, UDP, or Both (default).11. In the Device IP# field, enter the last three digits of the IP address you have reserved for the computer you want to forward Internet traffic to. The rest of the IP address has already been completed for you. 12. Select Enabled, then click Save. If you don’t want to use port forwarding but want to keep the information in the table, unselect the checkbox.NOTEIf you want to use software such as VNC on multiple computers, you will need to reconfigure the default ports that VNC uses on each additional computer. Then, create additional port forwarding entries for each additional computer. See your software’s documentation for help.How to set up port forwarding for a range of portsWhy would I set up port forwarding for a range of ports? Port forwarding is a feature that forwards inbound traffic from the Internet on a range of ports to a single device on your local network. Unlike a web camera that typically only requires a single port to be forwarded, some applications require forwarding to a range of ports. Example: You want to set up your computer so you can use BitTorrent, a popular peer-to-peer file sharing application. BitTorrent uses port 6881 by default. If that port is busy, the requesting BitTorrent client tries the next port in sequence. The most common configuration for home routers with a single BitTorrent computer is to set up port forwarding using a range of ports starting with 6881 and ending with port 6889.
45Port Forwarding and Port TriggeringLinksys EA-SeriesTo set up port range forwarding:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Set up a DHCP reservation for the IP address of the computer on which you installed the software. (See “How to set up the DHCP server on your router” on page 34). In this example, the IP address of the desktop computer with BitTorrent installed is 192.168.1.140. 3. Under Router Settings, click Security. 4. Click the Apps and Gaming tab.5. Click Port Range Forwarding. The Port Range Forwarding screen opens.6. Click Add a new Port Range Forwarding.7. In the Application name field, enter a descriptive name.8. In the Start ~ End Port fields, enter the range or ports. In this example, the range is 6881 to 6889.9. Select TCP as the protocol. 10. In the To IP Address field, enter the last 3 digits of the IP address of the device running the software. The rest of the IP address fields already completed. In this example, you would enter 140. 11. Select Enabled, then click Save. If you don’t want to use port range forwarding but want to keep the information in the table, unselect the checkbox.TIPSTo use software like BitTorrent on multiple computers on your network, create additional entries with a unique range of ports as shown above. BitTorrent works only with ports between 6881 and 6999.Depending on your computer’s firewall software, you may need to open a range of ports in your firewall to enable software that uses port range forwarding.How to set up port range triggering for online gamingWhy would I use port triggering instead of port forwarding? Port range triggering allows the router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the router, so that when the requested data returns through the router, the data is routed back to the proper computer. An example of port range triggering would be to enable a USB or Bluetooth headset for online chat and gaming.To set up port range triggering for multiple entries: 1. See your device documentation for information on the ports that the device uses.2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.
46Port Forwarding and Port TriggeringLinksys EA-Series3. Under Router Settings, click Security. 4. Click the Apps and Gaming tab.5. Click Port Range Triggering. The Port Range Triggering screen opens.6. Click Add a new Port Range Triggering.7. In the Device or Application field, enter a descriptive name (such as PS3Headset).8. For single ports, enter the same port number in each Triggered range and Forwarded range field.9. For port ranges, enter the same number ranges in each set of Triggered Range and Forwarded Range fields.10. Select Enabled, then click Save. If you don’t want to use port range triggering but want to keep the information in the table, unselect the checkbox.
47Maintaining and MonitoringLinksys EA-Series47How to back up and restore your router configurationWhy do I need to back up my router configuration? As with any valuable data, you should back up your router configuration. Your router might contain many customized settings. Those settings would be lost if you reset your router to its factory defaults, and you would need to re-enter all of them manually. If you back up your router configuration, restoring settings is easy.NOTEYou can only back up the router configuration locally (not remotely).To back up your router configuration:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting. 3. Click the Diagnostics tab.4. Under Router configuration, click Backup. You are prompted to save the file.5. Specify a file location, then click Save.TIPFor save multiple backup files, include the backup date in the filename as you save.To restore your router configuration:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting. 3. Click the Diagnostics tab.4. Under Router configuration, click Restore. The Restore Router Configuration dialog box opens.5. Click Choose File to navigate to the location of your configuration file, then select the file and click Open. 6. To restore the configuration, click Start to Restore.Maintaining and Monitoring
48Maintaining and MonitoringLinksys EA-SeriesHow to upgrade the router’s firmwareWhy would I need to upgrade my router’s firmware? Linksys may periodically publish a firmware upgrade either to fix a problem or to add features to your router. IMPORTANTDo not interrupt the upgrade process. You should not turn off the router or press the Reset button during the upgrade. Doing so may permanently disable the router.TIPSYour router automatically checks for available updates and installs them by default. Use the following instructions only if the automatic firmware update has been turned off.To upgrade the router’s firmware:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity. 3. Click the Basic tab.4. Under Firmware Update, click Check for Updates. 5. If an available update is found, follow the on-screen instructions to install it.TIPTo have your router automatically check for updates and install them, select Automatic under Firmware Update. How to restore factory defaultsIf you’ve tried previous troubleshooting steps and your network still doesn’t work, you may need to restore your router’s factory defaults. To restore your router to factory defaults, you can use the Reset button on the router or use Linksys Smart Wi-Fi.To reset your router using the reset button:CAUTIONWhenever you restart the router, all logs that are not saved will be lost.1. With your router connected to power and turned on, press and hold the Reset button on the back of your router for about 10 seconds (until the power indicator flashes).To reset your router to factory defaults using Linksys Smart Wi-Fi:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting. 3. Click the Diagnostics tab.4. Under Factory reset, click Reset.
49Maintaining and MonitoringLinksys EA-SeriesA confirmation screen opens.5. Click Ye s to confirm. All settings and logs are deleted, and your router is returned to its factory default settings.How to check the status of your routerWhy would I want to check the status of my router? Your router status tells you whether you have a secure Internet connection and informs you about the status of your network-connected devices.To check your router status:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting. 3. Click the Status tab. Detailed information about your router status is displayed.TIPFor field descriptions, click Help at the top of the screen.4. To view a list of connected network devices, click Devices. To view a full report of your router status, click Report.5. Click OK to close the screen.
50Maintaining and MonitoringLinksys EA-SeriesHow to disable the Ethernet port status lightsWhy would I want to disable the Ethernet port status lights? Depending on the placement of the router in a home, you might find the lights distracting. You can easily disable the lights using Linksys Smart Wi-Fi.To disable the lights:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Connectivity. 3. Click the Basic tab.4. Under Port Lights, click the ON/OFF button. How to test your Internet connectionWhat utilities are included in my router to test my Internet connection? Your router includes two diagnostic tests, Ping and Traceroute, that let you check network connections, including network devices and your Internet connection.To diagnose your Internet connection:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting. 3. Click the Diagnostics tab.4. To check whether an address can be reached:a. Under Ping IPv4, enter an IP address or URL into the IP or host name field.
51Maintaining and MonitoringLinksys EA-Seriesb. Select a number of times to ping from the Number to ping drop-down list.c. Click Start to Ping. A window opens showing the ping test results. You will see a response for each successful ping.NOTEIf an Internet URL fails to respond to ping, it doesn’t necessarily mean that the site is down. For security reasons, some sites are configured to not respond to ping requests.5. To trace the route that packets take between your router and a specific address:a. Under Trace route, enter an address in the IP or host name field.b. Click Start to Traceroute. A window opens with the test results.How to configure and use logsWhat kind of logging capabilities does my router have? Your router can track all traffic for your Internet connection and record that information in alog. To enable and view logs:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting.3. Click the Logs tab.4. To enable logs, click the Enable Logs button so that ON is displayed.You can: • View the logs directly in the list • Open the logs in a separate browser window • Print the logs
52TroubleshootingLinksys EA-Series52This chapter can help you solve common setup issues and connect to the Internet. You can find more help from our award-winning customer support at linksys.com/support.Your router was not successfully set upIf Linksys Smart Wi-Fi did not complete the setup, you can try the following: • Press and hold the Reset button on your router with a paperclip or pin until the LED starts flashing (about 10 seconds), then install the router again.Your router’s appearance may vary • Temporarily disable your computer’s firewall (see the security software’s instructions for help), then install the router again. • If you have another computer, use that computer to install the router again.Windows XP Service Pack updateOn Windows XP computers, Linksys Smart Wi-Fi requires Service Pack 3 in order to work. If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3.TIPTo temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem.To install Service Pack 3:1. Connect to the Microsoft Update website (update.microsoft.com/windowsupdate).2. Follow the instructions on the website or contact Microsoft if you need further help.3. After downloading and installing Service Pack 3, install the router again.Troubleshooting
53TroubleshootingLinksys EA-SeriesYour Internet cable is not plugged in messageIf you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps.To fix the problem:1. Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN. Back view of routerBack view of cable modem Back view of DSL modem2. Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l position.3. If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP. Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.4. If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.5. Install the router again.Cannot access your router messageIf you cannot access your router because your computer is not connected to your network, follow these troubleshooting steps. To access your router, you must be connected to your own network. If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network.To fix the problem on Windows computers:1. On your Windows desktop, right-click the wireless icon in the system tray. 2. Click View Available Wireless Networks. A list of available networks appears.
54TroubleshootingLinksys EA-Series3. Click your own network name, then click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected.4. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields, then click Connect. Your computer connects to the network, and you should now be able to access the router.To fix the problem on Mac computers:1. In the menu bar across the top of the screen, click the AirPort icon. A list of wireless networks appears. Linksys Smart Wi-Fi has automatically assigned your network a name.In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected.2. Click the wireless network name of your Linksys E-Series router (BronzeEagle in the example).3. Type your wireless network password (Security Key) into the Password field, then click OK.
55TroubleshootingLinksys EA-SeriesAfter setupThe Internet appears to be unavailableIf the Internet has difficulty communicating with your router, the problem may appear as a “Cannot find [Internet address]” message in your web browser. If you know that the Internet address is correct, and if you’ve tried several valid Internet addresses with the same result, the message could mean that there’s a problem with your ISP or modem communicating with your router.Try the following: • Make sure that the network and power cables are securely connected. • Make sure that the power outlet that your router is connected to has power. • Reboot your router. • Contact your ISP and ask about outages in your area.Why would I need to reboot my router? The most common method of troubleshooting your router is to turn off your router’s power, then turn it back on again. Your router can then reload its custom settings, and other devices (such as the modem) will be able to “rediscover” the router and communicate with it. This process is called rebooting.Rebooting your routerTo reboot your router using the power cord:1. Disconnect the power cord from the router and the modem.2. Wait 10 seconds, then reconnect the power cord to the modem. Make sure it has power.3. Wait until the modem’s Online indicator has stopped flashing, or wait two minutes, then reconnect the power cord to the router.4. Wait until the power indicator stops flashing, then wait two minutes before trying to connect to the Internet from a computer.To reboot your router using Linksys Smart Wi-Fi:1. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 7.2. Under Router Settings, click Troubleshooting. 3. Click the Diagnostics tab.4. Under Reboot, click Reboot. A confirmation screen opens.5. Click Yes to confirm. The router reboots. While the router is rebooting, all connected devices will lose their Internet connection.Linksys Smart Wi-Fi does not open in your web browserThe latest versions of the most common web browsers work with Linksys Smart Wi-Fi. Linksys Smart Wi-Fi works with these web browsers: • Internet Explorer 8 or higher • Firefox 8 or higher • Google Chrome 10 or higher • Safari 5 (for Mac) or higher
56TroubleshootingLinksys EA-SeriesYou cannot access Linksys Smart Wi-FiTo access your router directly, see “How to manually set up your router” on page 24:All other troubleshooting has been unsuccessfulIf you’ve tried previous troubleshooting steps and your network still doesn’t work, you may need to restore your router’s factory defaults.Why would I need to restore to factory defaults? When all other troubleshooting has failed, you may want to try restoring the router to its basic factory settings, which are the most common settings used in home networks. Resetting the router erases your custom settings, so you must restore the settings after. We recommend that you back up your configuration before resetting your router to factory defaults. See “How to back up and restore your router configuration” on page 47.To restore your router to factory defaults, you can use the Reset button on the router or use Linksys Smart Wi-Fi. For instructions, see “How to restore factory defaults” on page 48.
57SpecificationsLinksys EA-Series5757Linksys EA6900Model Name Linksys EA6900Description Linksys Smart Wi-Fi Router AC1900Model Number EA6900Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)Radio Frequency 2.4 and 5 GHz# of Antennas 3 dual band external antennasPorts Power, USB (2), Internet, Ethernet (1-4)Buttons Reset, Wi-Fi Protected Setup, power (EU models only)LEDs Top panel: Power Back panel: Internet, Ethernet (1-4)UPnP SupportedSecurity Features WEP, WPA, WPA2, RADIUSSecurity Key Bits Up to 128-bit encryptionStorage File System Support FAT, NTFS, and HFS+Browser Support Internet Explorer 8 or higher, Firefox 4 or higher, Google Chrome 10 or higher, and Safari 4 or higherEnvironmentalDimensions 10.8” x 1.58” x 7.25” (256 x 40 x 184 mm)Unit Weight 17.67 oz (501 g)Power 12V, 3.5ACertications FCC, IC, CE, Wi-Fi a/b/g/n/draft ac, Windows7, Windows 8, DLNAOperating Temp. 32 to 104°F (0 to 40°C)Storage Temp. -4 to 140°F (-20 to 60°C)Operating Humidity 10 to 80% relative humidity, non-condensingStorage Humidity 5 to 90% non-condensingNOTESFor regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support.Specifications are subject to change without notice.Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.Specifications
3425-01685ABELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.© 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.Visit linksys.com/support for award-winning 24/7 technical support130729JLR

Navigation menu