LINKSYS EA7300 Max-Stream AC1750 MU-MIMO GIGABIT ROUTER User Manual

LINKSYS LLC Max-Stream AC1750 MU-MIMO GIGABIT ROUTER Users Manual

Users Manual

    User Guide   MAX-STREAM™ AC1750 MU-MIMO GIGABIT ROUTER Model # EA7300
2  Contents Product Overview .........................................................................................................3 Top view ............................................................................................................................................................. 3 Back view ........................................................................................................................................................... 4 Setting Up: Basics ........................................................................................................6 Where to find more help ............................................................................................................................... 6 How to install your router ............................................................................................................................ 6 How to Use Linksys Smart Wi-Fi .............................................................................9 How to connect to Linksys Smart Wi-Fi.................................................................................................. 9 Network Map ................................................................................................................................................. 10 Guest Access ................................................................................................................................................ 10 Parental Controls......................................................................................................................................... 11 Media Prioritization ..................................................................................................................................... 11 Speed Test ..................................................................................................................................................... 12 External Storage.......................................................................................................................................... 12 Connectivity .................................................................................................................................................. 13 Troubleshooting ........................................................................................................................................... 13 Wireless ........................................................................................................................................................... 14 Security ........................................................................................................................................................... 14 Troubleshooting ......................................................................................................... 15 Your router was not successfully set up ............................................................................................. 15 Your Internet cable is not plugged in message ................................................................................. 16 Cannot access your router message .................................................................................................... 17 After setup ..................................................................................................................................................... 18 The Internet appears to be unavailable ............................................................................................... 18 Linksys Smart Wi-Fi does not open in your web browser .............................................................. 19 Specifications ............................................................................................................. 20 Linksys EA7300 .......................................................................................................................................... 20 Environmental ............................................................................................................................................... 20
3  Product Overview  Top view  Illuminated Linksys logo—The Linksys logo stays on steadily while connected to the internet. It flashes or pulses slowly during startup, self-testing and firmware upgrades. It flashes quickly when indicating connection errors.
4  Back view Adjustable antennas (1)—For best performance, position the antennas vertically as shown in the drawing. USB 3.0 port (2)—Connect and share a USB drive or USB printer on your network or on the internet. Internet port (3)—Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband internet cable/DSL or fiber modem. Note—For best performance, use CAT5e or higher rated cables on the Internet ports. Ethernet ports (4)—Connect Ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network. Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports.
5  Power port (5)—Connect the included AC power adapter. Wi-Fi Protected Setup™ button (6)—Press to configure wireless security on Wi-Fi Protected Setup-enabled network devices. Reset button (7)—Press and hold until the illuminated Linksys logo starts flashing to reset the router to factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the internet or mobile app. Power switch (8)—Press | (on) to turn on the router.
6  Setting Up: Basics Where to find more help In addition to this user guide, you can find help at these locations: • Linksys.com/support/EA7300 (documentation, downloads, FAQs, technical support, live chat, forums) Note—Licenses and notices for third party software used in this product may be viewed on http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-us/gplcodecenter for questions or GPL source code requests. How to install your router 1. To complete setup, you will need a computer to visit http://LinksysSmartWiFi.com in a web browser. 2. Identify your equipment.   If you have a separate modem and standalone router, disconnect and remove your old router. If you have a modem-router, leave it connected.  3. Position the antennas straight up and plug in the router to a power source. Make sure the power switch in the | (on) position. 4. Connect your router to your modem or modem router. Plug one end of the included internet cable to the yellow Internet port on your new router. If you have a modem, plug the other end into the Ethernet (LAN) port on the modem. If you have a modem-router, plug into any available port. 5. Wait until the illuminated Linksys LED on the top of your router stops blinking and is solid white.  6. Connect to the Wi-Fi name shown in the Quick Start Guide that came with your router. (You can change these details later.) If you need help connecting to the network refer to your device documentation at linksys.com/support/ea7300.
7  Note—You will not have internet access until router setup is complete. 7. Enter http://LinksysSmartWiFi.com in a web browser. Follow the on-screen instructions to complete your router setup. You also can type 192.168.1.1 in a browser to start setup. At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to configure your router from any computer with an internet connection. Manage your router’s settings: • Change your router’s name and password • Set up guest access • Configure parental controls • Connect devices to your network • Test your internet connection speed Note—As part of Linksys Smart Wi-Fi account setup, you will be sent a verification e-mail. From your home network, click the link in the email to associate your router with the Linksys Smart Wi-Fi account. Tip—Print the next page, then record your router and account settings in the table as a reference. Store your notes in a safe place.
8  2.4 GHz Network Name  Network Password   5 GHz Network Name  Network Password   Router Password   Guest Network Name  Guest Network Password  Linksys Smart Wi-Fi Username  Linksys Smart Wi-Fi Password
9  How to Use Linksys Smart Wi-Fi You can configure your router from anywhere in the world by using Linksys Smart Wi-Fi, but you can also configure your router directly from your home network. Linksys Smart Wi-Fi may be available for your mobile device, as well. See your device’s app store for information. How to connect to Linksys Smart Wi-Fi To connect to Linksys Smart Wi-Fi: 1. Open your computer’s web browser. 2. Go to www.linksyssmartwifi.com and log in to your account.   If you can’t remember your password, click Forgot your password? and follow the on-screen instructions to recover it.  For Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the main screen.
10  Network Map Lets you display and manage all network devices connected to your router. You can view devices on your main network and your guest network, or display information about each device.  Guest Access Lets you configure and monitor a network that guests can use without accessing all of your network resources.
11  Parental Controls Lets you block web sites and set internet access times.  Media Prioritization Lets you set which devices and applications have top priority for your network traffic.
12  Speed Test Lets you test your network’s internet connection speed.  External Storage Lets you access an attached USB drive (not included) and set up file sharing, a media server, and FTP access.
13  Connectivity Lets you configure basic and advanced network settings.  Troubleshooting Lets you diagnose problems with your router and check the status of the network.
14  Wireless Lets you configure your router’s wireless network. You can change the security mode, password, MAC filtering, and connect devices using Wi-Fi Protected Setup™.  Security Lets you configure your router’s wireless security. You can set up the firewall, VPN settings, and make custom settings for applications and games.
15  Troubleshooting You can find more help from our award-winning customer support at Linksys.com/support/EA7300. Your router was not successfully set up If Linksys Smart Wi-Fi did not complete the setup, you can try the following: • Press and hold the Reset button on your router with a paperclip or pin until the LED starts blinking (about 10 seconds). Install the router again.    • Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router again. • If you have another computer, use that computer to install the router again.
16  Your Internet cable is not plugged in message If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps. • Make sure that an Ethernet or internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.    • Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l (as opposed to O) position. • If your internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP.   • If your internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.
17  • If your computer was previously connected to your modem with a USB cable, disconnect the USB cable. • Install the router again. Cannot access your router message To access your router, you must be connected to your own network. If you currently have wireless internet access, the problem may be that you have accidentally connected to a different wireless network. To fix the problem on Windows computers, do the following*: 1. On your Windows desktop, click on the wireless icon in the system tray. A list of available networks will appear. 2. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Linksys EA7300 router, Damaged_Beez2.4 in this example, is shown selected.  3. If you are prompted to enter a network security key, type your password (security key) into the network security key field. Click OK.
18  4. Your computer will connect to the network, and you should be able to access the router. *Depending on your version of Windows, there could be some differences in wording or icons in these steps. To fix the problem on Mac computers, do the following: 1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear. Linksys Smart Wi-Fi has automatically assigned your network a name. 2. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Linksys EA7300 router, Damaged_Beez2.4 in this example, is shown selected.  3. Click the wireless network name of your Linksys EA7300 router (Damaged_Beez2.4 in the example). 4. Type your wireless network password (Security Key) into the Password field. Click OK. After setup The internet appears to be unavailable If the internet has difficulty communicating with your router, the problem may appear as a “Cannot find [internet address]” message in your Web browser. If you know that the internet address is correct, and if you’ve tried several valid internet addresses with the same result, the message could mean that there’s a problem with your ISP or modem communicating with your router. Try the following: • Make sure that the network and power cables are securely connected. • Make sure that the power outlet that your router is connected to has power. • Reboot your router.
19  • Contact your ISP and ask about outages in your area. The most common method of troubleshooting your router is to turn it off, then back on again. Your router can then reload its custom settings, and other devices (such as the modem) will be able to rediscover the router and communicate with it. This process is called rebooting. To reboot your router using the power cord, do the following: 1. Disconnect the power cord from the router and the modem. 2. Wait 10 seconds, and reconnect the power cord to the modem. Make sure it has power. 3. Wait until the modem’s online indicator has stopped blinking (about two minutes). Reconnect the power cord to the router. 4. Wait until the power indicator stops blinking. Wait two minutes before trying to connect to the internet from a computer. To reboot your router using Linksys Smart Wi-Fi, do the following: 1. Log in to Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 9.) 2. Under Router Settings, click Troubleshooting.  3. Click the Diagnostics tab. 4. Under Reboot, click Reboot.   5. Click Yes. The router will reboot. While the router is rebooting, all connected devices will lose their internet connection, and will automatically reconnect when the router is ready again. Linksys Smart Wi-Fi does not open in your web browser The latest versions of Google ChromeTM, Firefox®, Safari® (for Mac® and iPad®), Microsoft Edge, and Internet Explorer® version 8 and newer work with Linksys Smart Wi-Fi.
20  Specifications Linksys EA7300 Model Name Linksys Max-Stream AC 1750 MU-MIMO Gigabit Router Model Number EA7300 Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.4 GHz and 5 GHz # of Antennas 3 external adjustable antennas Ports Power, USB 3.0, Internet, Ethernet (1-4) Buttons Reset, Wi-Fi Protected Setup, Power LEDs Top panel: illuminated Linksys logo Back panel: Internet, Ethernet (1-4) UPnP Supported Security Features WEP, WPA2, RADIUS Security Key Bits Up to 128-bit encryption Storage File System Support FAT, NTFS, and HFS+ Browser Support Latest versions of Google ChromeTM, Firefox®, Safari® (for Mac® and iPad®), Microsoft Edge, and Internet Explorer® version 8 and newer work with Linksys Smart Wi-Fi Environmental Dimensions 10.12” x 7.24” x 2.2” (257 x 184 x 56 mm) without antennas Unit Weight 22.43 oz. (636 g) Power 12V, 2.5A Certifications FCC, IC, CE, Wi-Fi a/b/g/n/draft ac, Windows 7, Windows 8, DLNA Operating Temperature 32 to 104°F (0 to 40°C) Storage Temperature -4 to 140°F (-20 to 60°C) Operating Humidity 10% to 80% relative humidity, non-condensing Storage Humidity 5% to 90% non-condensing Specifications are subject to change without notice.
21  For regulatory, warranty, and safety information, go to Linksys.com/support/ea7300. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here: http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-us/gplcodecenter for questions or GPL source code requests. © 2016 Belkin International, Inc. and/or its affiliates. All rights reserved.  LNKPG-00309 RevA00
Details and DisclosuresFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•   Reorient or relocate the receiving antenna. •   Increase the separation between the equipment and devices. •   Connect the equipment to an outlet other than the receiver’s.•   Consult a dealer or an experienced radio/TV technician for assistance.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Mexico Regulatory StatementLa  operación de este equipo está sujeta a las siguientes dos condiciones: (1) es  posible que este equipo o dispositivo no cause interferencia perjudicial y (2)  este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la  que pueda causar su operación no deseada.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32 cm between the radiator and your body.This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Wireless DisclaimerThe maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.Safety NoticesEnglish WARNING: Do not use this product near water, for example, in a wet basement or near a  swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric  shock from lightning. WARNING: This product may contain chemicals, known to the State of California to cause cancer, and birth  defects or other reproductive harm. Wash hands after handling.  WARNING: The power adaptor is the equipment´s disconnection device. The power outlet must be located nearby the equipment and its access must be easy.Español ADVERTENCIA: No use este producto cerca del agua, por ejemplo en un sotano húmedo o cerca de  una piscina.  ADVERTENCIA: Evite usar este producto durante una tormenta eléctrica. Puede existir el riesgo remoto de  que se produzca una descarga eléctrica producida por un rayo.  ADVERTENCIA: El adaptador de alimentación es el dispositivo de desconexión del equipo. La base de toma  de corriente debe estar cerca del equipo y ser fácilmente accessible. Third-Party Software or FirmwareThe use of software or firmware not supported/provided by Linksys products may result that the equipment is no longer compliant with the regulatory requirements.Technical Documents on www.linksys.comFollow these steps to access technical documents:• Enter www.linksys.com in your web browser.•  Select the country or region in which you live.•  Click the Support tab.•  Type the model number or keyword.• Select Downloads from the list of tabs. •  Select the version of product. •  Click on the document you want and it will open in PDF format if you have Adobe Reader installed on your computer.•  WEB: For additional information, please visit http://linksys.comWARRANTY AND SUPPORT INFORMATIONIMPORTANT! PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATIONLIMITED WARRANTY (UNITED STATES AND CANADA)This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (“Belkin”)IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTSThe benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under local consumer protection laws. Nothing in this warranty limits or affects your legal rights.This manufacturer’s warranty is governed by the laws of the country in which you purchased your Belkin, Linksys or WeMo product. In many countries, consumers have rights under local consumer laws. Those consumer rights may differ between countries, states and provinces, and often cannot be excluded. Your local consumer rights organization can advise you on your legal rights. This manufacturer’s warranty is not intended to:•  change or exclude any rights under consumer law that cannot be lawfully changed or excluded; orlimit or exclude any right you have against the person who sold the Belkin, Linksys or WeMo product to you if that person has breached their sales contract with you.WHAT DOES THIS WARRANTY COVER?Belkin warrants that the product hardware and any software media (i.e., media on which the product software is provided) will be free from defects in materials and workmanship under normal use during the Warranty Period described below. This means that the product won’t be defective, and that it will look and work as advertised during the relevant period.This warranty does not apply to products purchased from a source other than Belkin or a Belkin Authorized Reseller.How long is the product warranted?Belkin warrants that the hardware in this Belkin, Linksys or WeMo product, and any associated software media, will be free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period begins on the date the product was purchased by the original end-user purchaser and lasts for the period set out in the table below: Product Type Warranty PeriodNew products 12 months Refurbished products 90 daysRepaired or replacement products The longer of the original Warranty Period or 30 daysSoftware media (if provided with the product) 90 days8850-00319 Rev. B00A claim under this warranty is only eligible if it is made within the Warranty Period.What isn’t covered?Belkin does not give any warranty:•  in relation to software or services, provided by Belkin or any third party, included in or with the product;•  that the product, software or services will always operate uninterrupted or error free;•  that the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% secure and cannot be hacked; or•  that a third party service the product needs will always be available. Note: Although Belkin does not make these promises in this warranty, you may have additional rights under consumer laws.Will this warranty always apply?This warranty does not apply if: •  the product has been tampered with or the assembly seal has been removed or damaged; •  the product has been altered or modified by someone other than Belkin; •  the warranty claim was made fraudulently or by misrepresentation; •  the product was not installed, operated, repaired, or maintained in accordance with Belkin’s instructions;•  the product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; •  damage to the product is cosmetic, including scratches and dents, or defects caused by normal wear and tear or normal aging of the product;•  the serial number on the product has been altered, defaced, or removed; or•  the product was supplied or licensed for beta, evaluation, testing or demonstration purposes, and you didn’t buy or license the product. Note: Although this warranty doesn’t apply in these situations, you may have additional rights under consumer laws.How will Belkin make things right?If you make an eligible claim under this warranty, Belkin will, at its election:•  repair the product with new or refurbished parts, or pay the reasonable costs of repairing the product; •  replace the product with a reasonably available equivalent new or refurbished Belkin, Linksys or WeMo product; or•  refund you the purchase price of the product, minus any rebates and discounts.Any repaired or replacement products are warranted for the remainder of the original Warranty Period or 30 days, whichever is longer. All products and parts that are replaced become the property of Belkin.Note: The rights and remedies outlined above are the only rights and remedies available under this warranty. However, you may have additional rights under consumer laws.GENERAL EXCLUSIONS AND LIMITATIONS OF LIABILITYIN THOSE JURISDICTIONS WHERE IT CAN LAWFULLY DO SO, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, BELKIN, ITS RESELLERS AND ITS SUPPLIERS HEREBY DISCLAIM AND EXCLUDE ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, ACCEPTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE, FITNESS FOR A PARTICULAR PURPOSE, LOSS OF OR DAMAGE TO DATA, LACK OF VIRUSES OR FREE FROM VIRUS OR MALWARE ATTACK, SECURITY, PERFORMANCE, LACK OF NEGLIGENCE, WORKMANLIKE EFFORT, QUIET ENJOYMENT, THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET YOUR REQUIREMENTS, OR THAT DEFECTS IN THE PRODUCT WILL BE CORRECTED, OR THAT YOUR USE OF THE PRODUCT WILL GENERATE ACCURATE, RELIABLE, TIMELY RESULTS, INFORMATION, MATERIAL OR DATA. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY BELKIN, A DEALER, AGENT OR AFFILIATE SHALL CREATE A WARRANTY. TO THE EXTENT WARRANTIES CANNOT BE DISCLAIMED OR EXCLUDED, THEY ARE LIMITED TO THE DURATION OF THE RELEVANT EXPRESS WARRANTY PERIOD. EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL BELKIN, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, LICENSORS AND ASSIGNS BE LIABLE FOR ANY DIRECT, INDIRECT, EXEMPLARY, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR REVENUE, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR LOSS OF ABILITY TO USE ANY THIRD PARTY PRODUCTS OR SERVICES, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER), REGARDLESS OF THE THEORY OF LIABLITY (CONTRACT, TORT OR OTHERWISE) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF BELKIN OR SUCH OTHER ENTITIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL THE TOTAL AGGREGATE LIABILITY OF BELKIN, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS TO YOU FOR ALL DAMAGES EXCEED THE PRICE YOU PAID FOR THE PRODUCT. THIS LIMITATION IS CUMULATIVE AND WILL NOT BE INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR CLAIM. THE FOREGOING LIMITATIONS WILL APPLY EVEN IF ANY WARRANTY OR REMEDY PROVIDED FAILS OF ITS ESSENTIAL PURPOSE. NOTHING IN THIS SECTION SHALL LIMIT THE LIABILITY OF BELKIN IN RELATION TO DEATH OR BODILY INJURIES. THE WARRANTIES AND REMEDIES SET OUT IN THIS AGREEMENT ARE EXCLUSIVE, AND, TO THE EXTENT PERMITTED BY LAW, IN LIEU OF ALL OTHERS ORAL OR WRITTEN, EXPRESS OR IMPLIED. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.BELKIN TECHNICAL AND WARRANTY SUPPORT INFORMATIONHOW DO I GET HELP?If you have a question about your product or experience a problem with it, please go to http://www.belkin.com/support or http://support.linksys.com. You will find lots of online support tools and information to help you with your product. What should I do if my product is defective?You always have the option to return the product to the original seller if you have a problem. You can make a claim based on this warranty or any consumer laws that apply to you.You can also make a claim under this warranty or local consumer laws by contacting Linksys or Belkin Technical Support. To find out how to contact us, click the “Contact Us” link on the home page of http://Linksys.com or http://www.belkin.com. If you are located outside the United States, you will need to choose your region/location first:For Linksys.com: http://www.linksys.com/us/change-region/For Belkin.com: http://www.belkin.com/us/ - Click the “Change Region” link at the bottom of the website and select your locationIf I believe my product is defective and covered by this warranty, what do I need to do?You will need to contact Technical Support for your region at the links above. So that we can help you, you will need to give  us some information when you contact us:•  your product model, hardware revision and serial number; •  the name of your Internet Service Provider (ISP); and•  proof that you purchased the product, with the date of the purchase shown and place where it was purchased.  WE WILL ALWAYS NEED A DATED PROOF OF ORIGINAL PURCHASE TO PROCESS WARRANTY CLAIMS. Sometimes we will need you to send the product back to us so that we can fix or replace it. If we ask you to return your product to us by post, you will be given a Return Materials Authorization (RMA) number and we’ll tell you where to send the product. You will need to make sure the product is properly packaged and shipped, and you will be responsible for the  costs of returning your product to us. We need to identify your product when it reaches us, so you’ll need to include the RMA  number AND a copy of your dated proof of original purchase (please keep the original) with the returned product. We also recommend that you send the package by registered and insured mail or by overnight courier to protect the package while  it is in transit.What happens when I return my product?Defective products covered by this warranty will be replaced without charge with the same product or an equivalent product of equal or greater value, or Belkin will provide you with a refund of the purchase price of the product, minus any rebates and discounts. The remedy offered will be determined by Belkin in its sole discretion.We can only ship replacement or repaired products to locations in the country where the original product was purchased. Belkin may need to delete all or part of your data to repair or replace your product. Belkin may also install software updates as part of warranty service. PLEASE MAKE SURE THAT YOU BACK UP ALL OF YOUR DATA ON THE PRODUCT BEFORE SENDING IT IN FOR REPAIR OR REPLACEMENT. BELKIN IS NOT RESPONSIBLE FOR ANY LOSS OF DATA OR SOFTWARE DURING WARRANTY SERVICE.Replacements not covered under warranty or your rights under consumer law may be refused by place of purchase, or may be subject to charge.Technical supportThis warranty is not a service or support contract. Details on our technical support offerings and policies (including any applicable fees) can be found at http://www.belkin.com/support or http://support.linksys.com. Belkin provides many different options to support you. Please click on or go to the appropriate website below for more details. Please make sure to change to your local country if necessary.•  Belkin and WeMo Products: http://www.belkin.com/support•  Linksys Products: http://support.linksys.comAlong with the Limited Warranty, Belkin provides Complimentary Assisted Technical Support for the Warranty Period to get your hardware up and running. Complimentary Assisted Technical Support includes technical support (by phone) and live chat (through your computer).  At this time, live chat is only available in certain countries. Please visit our websites (indicated above) in your local area for details.For additional support beyond the Complimentary Assisted Technical Support period or for assistance on advanced features beyond basic support, please contact our Technical Support team to learn more about how we can help you get the most out of your product. Please note that you may be assessed a fee to speak with our technician if you contact us outside the Complimentary Assisted Technical Support period.Additional information on some of our Premium Support Offerings can be found at:Linksys Networking Products – http://www.linksys.com/us/premium-support/Belkin and WeMo Networking Products – http://www.belkin.com/us/belkin-premium-support/Please Note: Some of these offerings may not be offered in your countryTelephone support may not be available where you live and may be subject to charge.MAX-STREAM™ ACMUMIMO GIGABIT ROUTERNEXT-GEN ACRegulatory and Warranty InformationModel# EA7300Business Unit:Program Manager:Packaging Engineer:Material:Blank Size (in):Side Shown:L x W x D (mm):DIE LAYOUT0Unit:Flute/Grain:REVIntermediatePRINT SIDEL x W x D (in):7[177.800]5[127.000]15[381.000]IN/MMDrawing Scale 1:1Retail Outside Dimension (Including Hang Tab)DO NOT PRINTDIE LINES, PRINTERS NOTESPRINT SPECS:DIE/MATERIAL SPECS:381 x 492+1/815 x 19+3/8Die Line File:Pushpak Jain157g/m^2 Art PaperIDL_EA7300_8850-00319_REVA00_REGULATORYINSERTColor Plates: Notes:Artwork File:vertical00RELEASE DATE: 06/24/2016Tolerance:+/- 1/32" -  0.8mmBlank Size (mm):Finish:DIELINE:THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USEDIN ANY MANNER WITHOUT THE WRITTENCONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUESTThis dieline works for following skus (if any):Business Unit:Program Manager:Packaging Engineer:Material:Blank Size (in):Side Shown:L x W x D (mm):DIE LAYOUT0Unit:Flute/Grain:REVIntermediatePRINT SIDEL x W x D (in):7[177.800]5[127.000]15[381.000]IN/MMDrawing Scale 1:1Retail Outside Dimension (Including Hang Tab)DO NOT PRINTDIE LINES, PRINTERS NOTESPRINT SPECS:DIE/MATERIAL SPECS:381 x 492+1/815 x 19+3/8Die Line File:Pushpak Jain157g/m^2 Art PaperIDL_EA7300_8850-00319_REVA00_REGULATORYINSERTColor Plates: Notes:Artwork File:vertical00RELEASE DATE: 06/24/2016Tolerance:+/- 1/32" -  0.8mmBlank Size (mm):Finish:DIELINE:THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USEDIN ANY MANNER WITHOUT THE WRITTENCONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUESTThis dieline works for following skus (if any):ICG PRODUCTIONPR# N/AFILE NAME INS_EA7300_8850-00319_RevB00_RegulatoryInsertSKU# EA7300P# 8850-00319 REVISION B00DESIGNER JLDATE August 30, 2016 12:34 PM VERSION 01

Navigation menu