LINKSYS HGA7T-3 Wireless-B Broadband Router User Manual

LINKSYS LLC Wireless-B Broadband Router

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

user manual

A Division of Cisco Systems, Inc.®Model No.Broadband RouterWireless-BBEFW11S4User GuideWIRELESSGHz2.4802.11b
62Appendix J: Contact InformationWireless-B Broadband RouterAppendix J: Contact InformationNeed to contact Linksys?Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com or ftp.linksys.comCan't find information about a product you want to buyon the web? Do you want to know more about networkingwith Linksys products? Give our advice line a call at: 800-546-5797 (LINKSYS)Or fax your request in to: 949-261-8868If you experience problems with any Linksys product,you can call us at: 800-326-7114Don't wish to call? You can e-mail us at: support@linksys.comIf any Linksys product proves defective during its warranty period,you can call the Linksys Return Merchandise Authorizationdepartment for obtaining a Return Authorization Number at: 949-261-1288(Details on Warranty and RMA issues can be found in the WarrantyInformation section in this Guide.)•Federal Communication Commission Interference Statement•This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:••-•Reorient or relocate the receiving antenna.•-•Increase the separation between the equipment and receiver.•-•Connect the equipment into an outlet on a circuit different from that•to which the receiver is connected.•-•Consult the dealer or an experienced radio/TV technician for help.••This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.••FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.••IMPORTANT NOTE:•FCC Radiation Exposure Statement:•This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.•This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.••Linksys declared that BEFW11S4 V4 is limited in CH1~11 by specified firmware controlled in USA.
Download:
Mirror Download [FCC.gov]
Document ID430012
Application ID2uHDp1wMeMlyTzBrWgZcFg==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize47.75kB (596841 bits)
Date Submitted2004-06-10 00:00:00
Date Available2004-06-10 00:00:00
Creation Date2004-06-03 11:35:07
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2004-06-03 19:38:07
Document Titleuser manual
FCC ID Filing: Q87-HGA7T-3

Navigation menu