LINKSYS WAP300N Selectable Dual-Band Wireless-N Access Point User Manual
LINKSYS LLC Selectable Dual-Band Wireless-N Access Point WAP300N UG for certificaionx
a href="https://usermanual.wiki/LINKSYS" itemprop="url">
LINKSYS >
Contents
- 1. User Manual
- 2. User Manual - Statements
User Manual
![Overview WAP300N is a highly flexible device which features four modes of operation: • Access Point (AP) mode • Wireless Media Connector (WMC) mode • Wireless Range Extender (WRE) mode • Wireless Bridge (WB) mode WAP300N is a selectable dual-band Wireless-N (802.11n) device and, therefore, it can operate in either 2.4 GHz or 5.0 GHz radio band. Access Point Mode • If you have a wired network, this mode adds the ability to connect wireless devices (such as notebook computers, tablets, and smartphones) to the network. • If you have an older wireless network, for example, Wireless-A/B/G (802.11a/b/g), this mode adds Wireless-N (802.11n) networking support to your network.](https://usermanual.wiki/LINKSYS/WAP300N.User-Manual/User-Guide-1852803-Page-1.png)
![• If you have a Wireless-N (802.11n) 2.4 GHz-only network, this mode adds support for the 5 GHz radio band. • If your current wireless router has a limited wireless coverage and you have a wired network in your house, this mode can extends the wireless coverage, by creating an additional wireless network, if you connect this device to your wired network. Access Point mode is the default operation mode in case the device is being reset to factory default settings. If you would like to use WAP300N in this mode, Step 1: Proceed to Setup > Operation Mode and follow the instructions to set the device to this mode. Step 2: Proceed to Wireless > Basic Wireless Settings and follow the instructions to configure the basic wireless settings. Step 3: Proceed to Wireless > Wireless Security and follow the instructions to configure the wireless security. Step 4: Use an Ethernet cable to connect WAP300N’s Ethernet port to the Ethernet/LAN port of your existing router or your wired network. Wireless Media Connector Mode In this mode, WAP300N adds wireless networking capability to any wired (Ethernet-capable) device (e.g. game console, media player, DVR, smart TV or network access storage). If you have a wired network device, connect it to this device for wireless network access. If you would like to use WAP300N in this mode, Step 1: Proceed to Setup > Operation Mode and follow the instructions to set the device to this mode. Step 2: Proceed to Wireless > Wireless Network Site Survey (recommended) or Wireless > Basic Wireless Settings , and follow the instructions to configure the basic wireless settings.](https://usermanual.wiki/LINKSYS/WAP300N.User-Manual/User-Guide-1852803-Page-2.png)