LINKSYS WAP54GX Wireless-G Access Point with SRX User Manual

LINKSYS LLC Wireless-G Access Point with SRX Book

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

Contents

Users Manual 2

13Chapter 5: Setting up the Wireless-G Access Point with SRXUsing the Setup WizardWireless-G Access Point with SRX9. The Basic Settings screen will appear next. Enter a descriptive name in the Device Name field. Create a password that will control access to the Access Point’s Web-based Utility and Setup Wizard.If your network router will automatically assign an IP address to the Access Point, then select Automatic-DHCP.If you want to assign a static or fixed IP address to the Access Point, then select Static IP. Enter the IP Address, Subnet Mask, and Default Gateway settings. If you are not sure what changes you should make, then keep the default values.Then, click the Next button to continue or Back to return to the previous page.Device Name - Enter a descriptive name for the Access Point.Password - Enter a password that will control access to the Utility and Setup Wizard.IP Address - This IP address must be unique to your network. (The default IP address is 192.168.1.245.)Subnet Mask - The Access Point's Subnet Mask must be the same as the subnet mask of your Ethernet network.Default Gateway - Enter the IP address of your network gateway (usually your router).Click the Next button to continue or the Back button to return to the previous screen.Figure 5-8: Basic Settings Screen
14Chapter 5: Setting up the Wireless-G Access Point with SRXUsing the Setup WizardWireless-G Access Point with SRXConfiguring the Access Point’s Wireless Settings1. The Setup Wizard will ask you to enter the SSID, Channel, and Network Mode settings for your wireless network.SSID - Enter the name of your wireless network. The SSID must be identical for all devices in the network. The default setting is linksys (all lowercase).Channel - Select the operating channel for your wireless network. All of your wireless devices will use this channel to communicate.Network Mode - Select the wireless standards running on your network. If you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed Mode. If you have only 802.11g devices, select G-Only. If you have only 802.11b devices, select B-Only. If you want to disable your wireless network, select Disable.Click the Next button to continue or the Back button to return to the previous screen.Figure 5-9: Wireless Settings Screen
Download:
Mirror Download [FCC.gov]
Document ID554961
Application IDTWlPV4PSL3hs5ybsNWVFlg==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize187.76kB (2346965 bits)
Date Submitted2005-06-22 00:00:00
Date Available2005-06-22 00:00:00
Creation Date2005-06-20 17:56:33
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2005-06-20 17:56:53
Document TitleBook Template.book
Document CreatorFrameMaker 7.0
Document Author: bewalter
FCC ID Filing: Q87-WAP54GX

Navigation menu