LINKSYS WES610N 4-Port Dual-Band N Ethernet Bridge User Manual WES610N User Guide

LINKSYS LLC 4-Port Dual-Band N Ethernet Bridge WES610N User Guide

UserManual.wiki >

LINKSYS >

WES610N User Manual HTML Version

User Manual

About This Guide

4-Device Wireless-N Gaming and Video Adapter

About This Guide

Icon Descriptions

While reading through the User Guide you may see

various icons that call attention to specific items. Below is

a description of these icons:

NOTE: This check mark indicates that there is

a note of interest and is something that you

should pay special attention to while using the

product.

WARNING: This exclamation point indicates

that there is a caution or warning and it is

something that could damage your property or

product.

WEB: This globe icon indicates a noteworthy

website address or e-mail address.

Online Resources

Website addresses in this document are listed without

http:// in front of the address because most current web

browsers do not require it. If you use an older web browser,

you may have to add http:// in front of the web address.

Resource Website

Linksys www.linksysbycisco.com

Linksys

International www.linksysbycisco.com/international

Glossary www.linksysbycisco.com/glossary

Network

Security www.linksysbycisco.com/security

reserved. Cisco, the Cisco logo, Linksys,

Network Magic and the Network Magic

logo are trademarks or registered

trademarks of Cisco Systems, Inc. and/or

its affiliates in the United States and certain

other countries. Mac and the Mac logo

are trademarks of Apple Computer, Inc.,

registered in the U.S. and other countries.

All other trademarks mentioned in this

document or website are the property of

their respective owners. The use of the

word partner does not imply a partnership

relationship between Cisco and any other

company.

Table of Contents

4-Device Wireless-N Gaming and Video Adapter

Chapter 1: Product Overview 1

LEDs Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Ports Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Chapter 2: Wireless Security Checklist 2

General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 3: Advanced Conguration 3

Setup > Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Wireless > Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Wireless > Wireless Network Site Survey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Wireless > WMM® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Wireless > Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Administration > Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Administration > Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Administration > Upgrade Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Status > Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Status > Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Status > About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Appendix A: Troubleshooting 12

Appendix B: Specications 13

Appendix C: Warranty Information 14

Limited Warranty – USA, Canada, Asia-Pacic (except Australia, New Zealand). . . . . . .14

Limited Warranty – Europe, Middle East, Africa, Latin America . . . . . . . . . . . . . . . . .15

Limited Warranty – Australia, New Zealand . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Appendix D: Regulatory Information 19

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Restrictions in the 5 GHz Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Avis d’Industrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Restrictions dans la bande 5 GHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Avis de non-responsabilité concernant les appareils sans l . . . . . . . . . . . . . . . . . .20

User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste

Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Appendix E: Software End User License Agreement 25

Cisco Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Software Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Chapter 1 Product Overview

4-Device Wireless-N Gaming and Video Adapter

Chapter 1:

Product Overview

Thank you for choosing the Linksys by Cisco

4-Device Wireless-N Gaming and Video Adapter. The Adapter

can connect any wired, Ethernet device to your wireless

network. The Adapter is based on dual-band Wireless-N, so

it is compatible with any Wireless-N, -G, -A, or -B router or

access point. For first-time installation, run the Setup Wizard

on the enclosed CD. To configure advanced settings, use the

convenient, browser-based utility.

LEDs Panel

Wireless (Blue) The Wireless LED lights up

when there is a wireless connection. The LED

flashes when the Adapter is actively sending or

receiving data over the wireless network.

Wi-Fi Protected Setup Button If your router

supports Wi-Fi Protected Setup and uses WPA or

WPA2 security, then you can use Wi-Fi Protected

Setup to automatically connect the Adapter. To

use Wi-Fi Protected Setup, run the Setup Wizard,

or refer to Wireless > Basic Wireless Settings,

page 4.

Wi-Fi Protected Setup LED (Blue/Amber) The

LED flashes blue for two minutes during Wi-Fi

Protected Setup. It lights up blue when wireless

security is enabled. If there is an error during

the Wi-Fi Protected Setup process, then the LED

lights up amber. Make sure the network router

supports Wi-Fi Protected Setup. Wait until the

LED is off, and then try again.

Ethernet (Blue) The Ethernet LED lights up

when there is a wired connection. The LED

flashes when the Adapter is actively sending or

receiving data over the Ethernet port.

Power (Blue) The Power LED lights up when

the Adapter is powered on.

Ports Panel

Ethernet The Ethernet port connects the

Adapter to a computer or other Ethernet

network device.

Reset There are two ways to reset the Adapter’s

factory defaults. Either press and hold the Reset

button for approximately five seconds, or restore

the defaults from Administration > Factory

Defaults in the Adapter’s web-based utility.

Power The Power port connects the Adapter

to the included power adapter.

Chapter 2 Wireless Security Checklist

4-Device Wireless-N Gaming and Video Adapter

Chapter 2:

Wireless Security Checklist

Wireless networks are convenient and easy to install, so

homes with high-speed Internet access are adopting them

at a rapid pace. Because wireless networking operates by

sending information over radio waves, it can be more

vulnerable to intruders than a traditional wired network.

Like signals from your cellular or cordless phones, signals

from your wireless network can also be intercepted. Since

you cannot physically prevent someone from connecting

to your wireless network, you need to take some additional

steps to keep your network secure.

1. Change the default wireless

network name or SSID

Wireless devices have a default wireless network name

or Service Set Identifier (SSID) set by the factory. This

is the name of your wireless network, and can be up

to 32 characters in length. Linksys wireless products

use linksys as the default wireless network name. You

should change the wireless network name to something

unique to distinguish your wireless network from other

wireless networks that may exist around you, but do not

use personal information (such as your Social Security

number) because this information may be available for

anyone to see when browsing for wireless networks.

2. Change the default password

For wireless products such as access points and routers,

you will be asked for a password when you want to change

their settings. These devices have a default password set

by the factory. The Linksys default password is admin.

Hackers know these defaults and may try to use them

to access your wireless device and change your network

settings. To thwart any unauthorized changes, customize

the device’s password so it will be hard to guess.

3. Enable MAC address filtering

Linksys routers give you the ability to enable Media Access

Control (MAC) address filtering. The MAC address is a

unique series of numbers and letters assigned to every

networking device. With MAC address filtering enabled,

wireless network access is provided solely for wireless

devices with specific MAC addresses. For example, you can

specify the MAC address of each computer in your home

so that only those computers can access your wireless

network.

4. Enable encryption

Encryption protects data transmitted over a wireless

network. Wi-Fi Protected Access (WPA/WPA2) and Wired

Equivalent Privacy (WEP) offer different levels of security

for wireless communication.

A network encrypted with WPA/WPA2 is more secure

than a network encrypted with WEP, because WPA/WPA2

uses dynamic key encryption. To protect the information

as it passes over the airwaves, you should enable the

highest level of encryption supported by your network

equipment.

WEP is an older encryption standard and may be the

only option available on some older devices that do not

support WPA.

General Network Security Guidelines

Wireless network security is useless if the underlying

network is not secure.

•Password protect all computers on the network and

individually password protect sensitive files.

•Change passwords on a regular basis.

•Install anti-virus software and personal firewall

software.

•Disable file sharing (peer-to-peer). Some applications

may open file sharing without your consent and/or

knowledge.

Additional Security Tips

•Keep wireless routers, access points, or gateways away

from exterior walls and windows.

•Turn wireless routers, access points, or gateways

off when they are not being used (at night, during

vacations).

•Use strong passphrases that are at least eight characters

in length. Combine letters and numbers to avoid using

standard words that can be found in the dictionary.

WEB: For more information on wireless security,

visit www.linksysbycisco.com/security

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Chapter 3:

Advanced Configuration

After setting up the Adapter with the Setup Wizard

(located on the CD-ROM), the Adapter will be ready

for use. However, if you want to change its advanced

settings, use the Adapter’s web-based utility. This chapter

describes each web page of the utility and each page’s key

functions. You can access the utility via a web browser on

a computer networked with the Adapter.

The web-based utility has these main tabs: Wireless,

Network Setup, Administration, and Status. Additional

tabs will be available after you click one of the main tabs.

How to Access the Web-Based Utility

Use a web browser to access the web-based utility.

If the Adapter is connected to a network with a DHCP

server (usually the network router), then the Adapter will

obtain its IP address from the DHCP server. If there is no

DHCP server, then the Adapter will use its default static

IP address, 169.254.1.250. (If you set a permanent static

IP address on the Adapter through the web-based utility,

then enter the static IP address instead.)

NOTE: If you do not know the Adapter’s IP

address, then find its IP address in the DHCP

clients table of your router. (Refer to the

documentation for your router.)

If you cannot locate the Adapter’s IP address, you

can reset the Adapter; press the Reset button

on the Adapter for approximately five seconds,

using a straightened paper clip. This will reset

the Adapter back to the factory default settings.

The Adapter will request an IP address from the

DHCP server (usually the network router). If no

DHCP server is found, then the Adapter will use

its default static IP address, 169.254.1.250,

until it detects a DHCP server and is assigned a

dynamic IP address.

If the Adapter is not associated with a router and is using

the factory default settings, connect a computer to the

Adapter using an Ethernet connection to access the

web-based utility. You will need to configure the Ethernet

connection on the computer with a static IP address and

subnet mask.

The IP address of your Ethernet adapter should be set to a

specific IP address.

1. In the IP address field, enter 169.254.x.y (x should

be replaced by a number between 1 and 254, and y

should be replaced by a number between 0 and 255).

2. In the Subnet mask field, enter 255.255.0.0.

NOTE: The steps to assign a static IP address to

the Ethernet adapter on your computer vary by

operating system. For instructions, please refer

to the help documentation of your specific

operating system.

After you have assigned your Ethernet adapter with a

static IP address, launch your web browser, and enter the

Adapter’s IP address (the default setting is 169.254.1.250)

in the Address field. Press Enter.

A password request screen appears. (Non-Windows XP

users will see a similar screen.) Leave the User name field

blank. Enter the password you created during the Setup

Wizard. If you did not create a new password, use the

default password admin. (You can set a new password

from the Administration > Management screen.) Click OK

to continue.

Password Screen

NOTE: If the password request screen does not

appear, wait two minutes and try again.

Setup > Basic Setup

The first screen that appears is the Basic Setup screen. Use

this screen to change the web-based utility’s language, or

to change the Adapter’s wired, Ethernet network settings.

Setup > Basic Setup (Automatic Configuration - DHCP)

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Setup > Basic Setup (Static IP)

Language

Language This is used to set the language displayed by

the web-based utility. Select the desired language from

the drop-down menu.

Network Setup

This section determines if the Adapter’s IP address is

obtained automatically from a DHCP server, such as your

network router (Automatic Configuration - DHCP), or set

manually (Static IP).

Bridge IP If your network has a DHCP server, such as your

network router, assigning IP addresses to your network

devices, then keep the default, Automatic Configuration

- DHCP. The Adapter will request an IP address from the

DHCP server (usually the network router). If no DHCP

server is found, then the Adapter will use its default static

IP address, 169.254.1.250, until it detects a DHCP server

and is assigned a dynamic IP address.

If you want to set a permanent static IP address for the

Adapter, then select Static IP.

If you select Static IP, then complete the following fields:

•Static IP Address Enter a unique IP address that will

be used to access the web-based utility.

•Subnet Mask Enter the subnet mask of your wired

network.

•Default Gateway Enter the IP address of the default

gateway for your network (in most cases, this is your

router).

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wireless > Basic Wireless Settings

Use the Basic Wireless Settings screen to configure the

Adapter’s basic wireless and security settings.

There are two ways to configure the Adapter’s settings,

manual and Wi-Fi Protected Setup. Wi-Fi Protected Setup

is a feature that makes it easy to set up your wireless

network. If your network router supports Wi-Fi Protected

Setup and uses WPA or WPA2 security, then you can

use Wi-Fi Protected Setup to automatically connect the

Adapter.

Configuration View To manually configure your wireless

network, select Manual. Refer to Basic Wireless Settings,

page 4. To use Wi-Fi Protected Setup, select Wi-Fi

Protected Setup. Refer to Wi-Fi Protected Setup, page

Basic Wireless Settings

Wireless > Basic Wireless Settings (Manual)

Network Name (SSID) The SSID is the network name

shared among all points in a wireless network. The SSID

must be identical for all devices in the wireless network. It

is case-sensitive and must not exceed 32 characters (use

any characters on the keyboard). Make sure this setting

matches the setting on your wireless router or access

point. For added security, you should change the default

SSID (linksys) to a unique name.

Wireless Security

The Adapter supports the following wireless security

options: WPA Personal, WPA2 Personal, and WEP. WPA

(Wi-Fi Protected Access) and WPA2 are stronger security

methods than WEP (Wired Equivalent Privacy). For more

information about wireless security, refer to Chapter

2: Wireless Security Checklist, page 2.

Security Mode

Select the security method for your wireless network. If

you do not want to use wireless security, keep the default,

Disabled.

NOTE: Remember that each device in your

wireless network MUST use the same security

method and passphrase/key, or else the wireless

devices will not be able to communicate with

each other.

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

WPA Personal

WPA is a security standard stronger than WEP encryption.

Security Mode > WPA Personal

Encryption WPA supports the TKIP encryption method,

with dynamic encryption keys.

Passphrase Enter the key shared by the Adapter and

your wireless router or access point. It must have 8-63

characters.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

WPA2 Personal

WPA2 is a more advanced, more secure version of WPA.

Security Mode > WPA2 Personal

Encryption WPA2 supports two encryption methods,

TKIP and AES, with dynamic encryption keys. Select the

encryption method, AES or TKIP or AES. The default

selection is AES.

Passphrase Enter the key shared by the Adapter

and wireless router or access point. It must have 8-63

characters.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

WEP

WEP is a basic encryption method, which is not as secure

as WPA or WPA2.

Security Mode > WEP

Encryption Select a level of WEP encryption, 40/64 bits

(10 hex digits) or 104/128 bits (26 hex digits). The

default is 40/64 bits (10 hex digits).

Key 1 Enter the WEP key of your network.

Tx Key Key 1 is the transmit key used by the Adapter.

Authentication The default is Auto, which allows either

Open system or Shared key authentication to be used.

Select Open to use open system authentication; the sender

and recipient do not use a WEP key for authentication.

Select Shared to use shared key authentication; the

sender and recipient use a WEP key for authentication.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wi-Fi Protected Setup

There are two methods available. Use the method that

applies to the router you are using.

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Wi-Fi Protected Setup > Congratulations

Method #1

Use this method if your router has a Wi-Fi Protected Setup

button.

1. Click or press the Wi-Fi Protected Setup button on

the router.

2. Within two minutes, click the Wi-Fi Protected Setup

button on the Adapter’s Wi-Fi Protected Setup screen.

3. After the Adapter has been configured, click Close.

The Wi-Fi Protected Setup screen displays the Link Status,

Network Name (SSID), and Security method.

Method #2

Use this method if your router requests the PIN number

of the Adapter.

1. On the router’s Wi-Fi Protected Setup screen, enter the

PIN number on the Adapter’s Wi-Fi Protected Setup

screen. Then click Register or the appropriate button.

(It is also listed on the label on the bottom of the

Adapter.)

2. On the Adapter’s Wi-Fi Protected Setup screen, click OK.

3. After the Adapter has been configured, click Close.

The Wi-Fi Protected Setup screen displays the Link Status,

Network Name (SSID), and Security method.

Wireless > Wireless Network Site Survey

Click the Wireless Network Site Survey tab to begin a

site survey. The Wireless Network Site Survey screen lists the

wireless networks detected by the Adapter.

Wireless > Wireless Network Site Survey

Wireless Network Site Survey

Number of Wireless Networks The number of wireless

networks detected by the Adapter is displayed.

Select To connect to a wireless network, click Select.

Then click Connect.

Wireless Network Name The network name or SSID of

the wireless network is displayed.

GHz The radio band of the wireless network is displayed.

Signal The percentage of signal strength is displayed.

100% is the strongest signal strength possible; 0% is the

weakest possible.

Security

the network supports Wi-Fi Protected Setup,

the Wi-Fi Protected Setup icon

is displayed

. The security

method used by the wireless network is displayed.

Click Refresh to update the on-screen information.

After you have selected a network, click Connect. A new

screen appears. Follow the instructions for the security

method of your network.

WPA

Wireless Network Site Survey > Wireless Security (WPA)

Network Name (SSID) The name of the network you

selected is automatically displayed.

Security Mode WPA Personal is automatically displayed.

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Encryption WPA supports the TKIP encryption method,

with dynamic encryption keys.

Passphrase Enter the key shared by the Adapter

and wireless router or access point. It must have 8-63

characters.

Click Refresh to update the on-screen information.

After you have entered the security settings, click

Connect.

WPA2

Wireless Network Site Survey > Wireless Security (WPA2)

Network Name (SSID) The name of the network you

selected is automatically displayed.

Security Mode WPA2 Personal is automatically

displayed.

Encryption WPA2 supports two encryption methods,

TKIP and AES, with dynamic encryption keys. Select the

encryption method, AES or TKIP or AES.

Passphrase Enter the key shared by the Adapter

and wireless router or access point. It must have 8-63

characters.

Click Refresh to update the on-screen information.

After you have entered the security settings, click

Connect.

WEP

Wireless Network Site Survey > Wireless Security (WEP)

Network Name (SSID) The name of the network you

selected is automatically displayed.

Security Mode WEP is automatically displayed.

Encryption Select a level of WEP encryption, 40/64 bits

(10 hex digits) or 104/128 bits (26 hex digits).

Key 1 Enter the WEP key of your network.

Tx Key Key 1 is the transmit key used by the Adapter.

Authentication The default is Auto, which allows either

Open system or Shared key authentication to be used.

Select Open to use open system authentication; the sender

and recipient do not use a WEP key for authentication.

Select Shared to use shared key authentication; the

sender and recipient use a WEP key for authentication.

Click Refresh to update the on-screen information.

After you have entered the security settings, click

Connect.

Wireless > WMM®

Configure the Wireless MultiMedia (WMM) settings. WMM

prioritizes packets depending on their respective access

mode (traffic type): Background, Best Effort, Video, or

Voice. These settings should only be adjusted by an expert

administrator as incorrect settings can reduce wireless

performance.

Wireless > WMM

NOTE: The settings on the WMM screen are

designed for advanced users only.

WMM

Access Mode

You can assign different settings to the four access

modes available. Select the mode you want to configure:

Background, Best Effort, Video, or Voice. Follow the

instructions for the mode you select.

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Background

Use Aggregation This option defines whether or not the

Media Access Control (MAC) layer will set up an Add Block

Acknowledgement (ADDBA) session. The default is No.

Select Yes to enable this option.

Accept Aggregation This option defines whether or not

the MAC layer will accept an ADDBA request. The default

is Yes. Select No to disable this option.

Max. Number of Packets in Aggregation This option

defines the maximum number of packets (sub-frames) in

the aggregate. The range is 0 to 7. The default is 7.

Max. Aggregation Size This option defines the maximum

size of the aggregate (in bytes). The range is 0 to 16000.

The default is 12000.

Timeout Internal This option defines the timeout period

in which the aggregate should be closed with a “closing

condition” before it is closed by the timer. The range is 0 to

100 ms. The default is 3.

Min. Size of Packet in Aggregation This option defines

the minimum size (in bytes) of packets to be accumulated

in the aggregate. The range is 0 to 1500. The default

is 10.

ADDBA Timeout This option defines the duration

after which the ADDBA setup is terminated, if there are

no frame exchanges within this duration by the Block

Acknowledgement (ACK) agreement. The range is 0 to

65535 ms. The default is 0, which disables the timeout.

Aggregation Window Size This option defines the

maximum number of packets transmitted without getting

ACKs. The range is 0 to 64. The default is 64.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Best Effort

Use Aggregation This option defines whether or not the

Media Access Control (MAC) layer will set up an Add Block

Acknowledgement (ADDBA) session. The default is Yes.

Select No to disable this option.

Accept Aggregation This option defines whether or not

the MAC layer will accept an ADDBA request. The default

is Yes. Select No to disable this option.

Max. Number of Packets in Aggregation This option

defines the maximum number of packets (sub-frames) in

the aggregate. The range is 0 to 10. The default is 10.

Max. Aggregation Size This option defines the maximum

size of the aggregate (in bytes). The range is 0 to 20000.

The default is 16000.

Timeout Internal This option defines the timeout period

in which the aggregate should be closed with a “closing

condition” before it is closed by the timer. The range is 0 to

100 ms. The default is 3.

Min. Size of Packet in Aggregation This option defines

the minimum size (in bytes) of packets to be accumulated

in the aggregate. The range is 0 to 1500. The default

is 10.

ADDBA Timeout This option defines the duration

after which the ADDBA setup is terminated, if there are

no frame exchanges within this duration by the Block

Acknowledgement (ACK) agreement. The range is 0 to

65535 ms. The default is 0, which disables the timeout.

Aggregation Window Size This option defines the

maximum number of packets transmitted without getting

ACKs. The range is 0 to 64. The default is 64.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Video

Use Aggregation This option defines whether or not the

Media Access Control (MAC) layer will set up an Add Block

Acknowledgement (ADDBA) session. The default is Yes.

Select No to disable this option.

Accept Aggregation This option defines whether or not

the MAC layer will accept an ADDBA request. The default

is Yes. Select No to disable this option.

Max. Number of Packets in Aggregation This option

defines the maximum number of packets (sub-frames) in

the aggregate. The range is 0 to 7. The default is 7.

Max. Aggregation Size This option defines the maximum

size of the aggregate (in bytes). The range is 0 to 16000.

The default is 12000.

Timeout Internal This option defines the timeout period

in which the aggregate should be closed with a “closing

condition” before it is closed by the timer. The range is 0 to

100 ms. The default is 3.

Min. Size of Packet in Aggregation This option defines

the minimum size (in bytes) of packets to be accumulated

in the aggregate. The range is 0 to 1500. The default

is 10.

ADDBA Timeout This option defines the duration

after which the ADDBA setup is terminated, if there are

no frame exchanges within this duration by the Block

Acknowledgement (ACK) agreement. The range is 0 to

65535 ms. The default is 0, which disables the timeout.

Aggregation Window Size This option defines the

maximum number of packets transmitted without getting

ACKs. The range is 0 to 64. The default is 64.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Voice

Use Aggregation This option defines whether or not the

Media Access Control (MAC) layer will set up an Add Block

Acknowledgement (ADDBA) session. The default is Yes.

Select No to disable this option.

Accept Aggregation This option defines whether or not

the MAC layer will accept an ADDBA request. The default

is Yes. Select No to disable this option.

Max. Number of Packets in Aggregation This option

defines the maximum number of packets (sub-frames) in

the aggregate. The range is 0 to 2. The default is 2.

Max. Aggregation Size This option defines the maximum

size of the aggregate (in bytes). The range is 0 to 16000.

The default is 10000.

Timeout Internal This option defines the timeout period

in which the aggregate should be closed with a “closing

condition” before it is closed by the timer. The range is 0 to

100 ms. The default is 10.

Min. Size of Packet in Aggregation This option defines

the minimum size (in bytes) of packets to be accumulated

in the aggregate. The range is 0 to 1500. The default

is 10.

ADDBA Timeout This option defines the duration

after which the ADDBA setup is terminated, if there are

no frame exchanges within this duration by the Block

Acknowledgement (ACK) agreement. The range is 0 to

65535 ms. The default is 0, which disables the timeout.

Aggregation Window Size This option defines the

maximum number of packets transmitted without getting

ACKs. The range is 0 to 64. The default is 64.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wireless > Advanced Wireless Settings

Configure the Adapter’s advanced wireless functions.

These settings should only be adjusted by an expert

administrator as incorrect settings can reduce wireless

performance.

Wireless > Advanced Wireless Settings

NOTE: The settings on the Advanced Wireless

Settings screen are designed for advanced users

only.

Advanced Wireless

Use LDPC Low-Density Parity-Check Code (LDPC) enables

or disables error correction to reduce the probability of

data loss in noisy channels. The Rate Adaptation algorithm

automatically disabled LDPC coding when working at high

PHY rates (higher than 162). To use the LDCP advanced

error correction scheme, keep the default, Yes. Otherwise,

select No.

ERP Protection Type This option configures protection

of OFDM packets despite the presence of 802.11b stations

within the wireless network. By sending RTS/CTS or

CTS2Self packets in 802.11b rates, the Adapter informs

the wireless network that OFDM packets are going to

be transferred and protects the packets in the wireless

network. The RTS/CTS and CTS2Self packets create

overhead, which may result in lower throughputs.

The RTS/CTS option provides better coverage but lower

throughputs when compared to CTS2Self, because the

RTS/CTS option includes acknowledgement from the

receiving device. To use the RTS/CTS option, keep the

default, RTS/CTS. The None option may cause collisions

between OFDM and CCK packets. To use the None option,

select None. To use the CTS2Self option, select CTS2Self.

11n Protection Type This option configures protection

from non-High Throughput (HT) devices within the

wireless network. In case the wireless router (or access

point) detects an association of a non-HT legacy device,

it will signal all the HT devices to use RTS/CTS or CTS2Self

mechanisms before each data transmission. This feature

also supports all 802.11n standard protections, including

MIMO.

The RTS/CTS option provides better coverage but lower

throughputs when compared to CTS2Self, because the

RTS/CTS option includes acknowledgement from the

receiving device. To use the RTS/CTS option, keep the

default, RTS/CTS. The None option may cause collisions

between HT and legacy packets. To use the None option,

select None. To use the CTS2Self option, select CTS2Self.

Percentage of maximal transmit power This option

sets the percentage of maximal transmit power relative

to the regulatory domain restrictions. For example, if the

regulatory domain restriction allows transmissions of

up to 20 dB, then setting the percentage at 50% allows

maximal transmit power of 10 dB. Select the percentage

you want to use: 12%, 25%, 50%, or 100%. The default

is 100%.

QoS Classification Type This option sets 802.1D or

802.1Q mapping from the IP DSCP/TOS field to WMM

priorities (Background, Best Effects, Video, Voice). Keep

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

the default, 802.1D, or select 802.1Q, which is used by

some IPTV streams.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Administration > Management

Use this screen to manage specific Adapter functions:

access to the web-based utility, backup of the

configuration file, and reboot.

Administration > Management

Management

Bridge Access

Use a password to protect access to the web-based

utility.

Bridge Password Enter a new Password for the Adapter.

Re-enter to confirm Enter the Password again to confirm.

Idle Timeout The login times out after a period of

inactivity that you specify. The range is 60 to 3600 seconds.

The default is 600.

Web Access

Access via Wireless If you are using the Adapter in a

public domain where you are giving wireless access

to your guests, you can disable wireless access to the

Adapter’s web-based utility. You will only be able to access

the web-based utility via a wired connection if you disable

the setting. Keep the default, Enabled, to allow wireless

access to the Adapter’s web-based utility, or select

Disabled to block wireless access to the utility.

Backup and Restore

Backup To back up the Adapter’s configuration file,

click Backup Configurations. Then follow the on-screen

instructions.

Restore Click Browse and select the configuration file.

Then click Restore Configurations.

System Reboot

Reboot To reboot or restart the Adapter, click Start to

Reboot.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Administration > Factory Defaults

Use this screen to restore the Adapter’s configuration to

its factory default settings.

Factory Defaults

Restore All Settings To reset the Adapter’s settings to the

factory defaults, click Restore All Settings. Any settings

you have saved will be lost when the default settings are

restored.

Administration > Factory Defaults

Administration > Upgrade Firmware

Use this screen to upgrade the Adapter’s firmware. Do

not upgrade the firmware unless you are experiencing

problems with the Adapter or the new firmware has a

feature you want to use.

Administration > Upgrade Firmware

Before upgrading the firmware, download the Adapter’s

firmware upgrade file from the Linksys website,

www.linksysbycisco.com.

Upgrade Firmware

Please select a file to upgrade the firmware Click

Browse and select the firmware upgrade file. Then c

lick

Start to Upgrade and follow the on-screen instructions.

Chapter 3 Advanced Configuration

4-Device Wireless-N Gaming and Video Adapter

Status > Bridge

The Adapter’s current status information is displayed.

Status > Bridge

Bridge Information

Firmware Version The Adapter’s current firmware is

displayed.

Local Network

Local MAC Address The Adapter’s MAC Address, as seen

on your local, Ethernet network, is displayed.

IP Address The Adapter’s IP Address, as seen on your

local, Ethernet network, is displayed.

Subnet Mask The Subnet Mask configured for your local

network is displayed.

Status > Wireless

Information about your wireless network is displayed.

Status > Wireless

Wireless

Link Status The status of the connection to your wireless

network is displayed.

MAC Address The Adapter’s MAC Address, as seen on

your local, wireless network, is displayed.

Network Name (SSID) The wireless network name or

SSID is displayed.

BSSID The wireless MAC address of the connected

wireless router (or access point) is displayed.

Radio Band The radio band of your wireless network is

displayed.

Channel Width The channel width, in MHz, used by your

wireless network is displayed.

Wide Channel Depending on the channel settings of

your network router, the Wide Channel is displayed. If you

selected Wide - 40MHz Channel for the router’s Radio Band

or Channel Width setting, then this will be your primary

Wireless-N channel.

Standard Channel The Standard Channel setting is

displayed. If you selected Wide – 40MHz Channel for

the router’s Radio Band or Channel Width setting, then

the Standard Channel will be a secondary channel for

Wireless-N.

Bit Rate The data transmission rate is displayed.

Signal The percentage of signal strength is displayed.

100% is the strongest signal strength possible; 0% is the

weakest possible.

Security The security method of your wireless network

is displayed.

Status > About

Information about the web-based utility is displayed.

Status > About

Web Server

displayed.

Appendix A Troubleshooting

4-Device Wireless-N Gaming and Video Adapter

Appendix A:

Troubleshooting

Your computer or other wired, Ethernet device cannot

communicate with the wireless router.

1. Access the web-based utility of the Adapter (refer to

Chapter 3: Advanced Configuration, page 3).

2. On the Basic Wireless Settings screen, make sure the

Network Name (SSID) matches the name of your

wireless network.

3. Make sure the security settings (WPA, WPA2, or WEP)

match the security settings of your wireless network.

The Adapter’s IP address needs to be changed.

If the Adapter is connected to a network with a DHCP

server (usually the network router), then the Adapter will

obtain its IP address from the DHCP server. If there is no

DHCP server, then the Adapter will use its default, static IP

address, 169.254.1.250.

If you want the Adapter to always use a static IP address,

then follow these instructions:

1. Access the web-based utility of the Adapter (refer to

Chapter 3: Advanced Configuration, page 3).

2. Click the Network Setup tab.

3. From the Network Connection Type drop-down menu,

select Static IP.

4. Complete the Static IP Address, Subnet Mask, and

Default Gateway fields.

5. Click Save Settings.

The Adapter-enabled computer or other wired, Ethernet

device will not communicate with another wireless-

enabled device (such as a computer or printer).

Check the following:

•Make sure the wireless-enabled device is on the same

wireless network as the computer or other wired,

Ethernet device connected to the Adapter.

•Make sure that the same Network Name (SSID) is used

for all devices on the wireless network.

•Make sure all devices are on the same IP network,

using compatible IP addresses.

The web-based utility does not accept your password.

Check the following:

•The password is case-sensitive. Make sure that you are

using the correct case(s) when entering the password.

•If you forget your password, you can reset the Adapter

to its factory defaults.

Press and hold the Adapter’s Reset button for

approximately five seconds; the password will be reset

to its factory default, admin. All other Adapter settings

will be reset to the factory defaults as well. (To access

the web-based utility, enter admin in the Password

field.)

After you make changes through the web-based utility,

the new settings are not displayed on-screen.

On your web browser, click Refresh. If the new settings

are not displayed, then follow these instructions:

1. Unplug the power adapter from the Adapter.

2. Wait five seconds, and then plug the power adapter

back into the Adapter.

3. On your web browser, click Refresh.

WEB: If your questions are not addressed

here, refer to the Linksys website,

www.linksysbycisco.com

Appendix B Specifications

4-Device Wireless-N Gaming and Video Adapter

Appendix B:

Specifications

Model WES610N

Standards IEEE 802.3u, 802.11g, 802.11b,

802.11a, draft 802.11n

LEDs Power, Ethernet, Wi-Fi Protected

Setup™, Wireless

Ports Ethernet (4), Power

Buttons Reset, Wi-Fi Protected Setup™

Cabling Type Cat 5

No. of Antennas 3 (internal)

Antenna Connector

Type N/A

Detachable (Yes/No) No

Modulations 802.11a: OFDM/BPSK, QPSK,

16-QAM, 64-QAM

802.11b: CCK/QPSK, BPSK

802.11g: OFDM/BPSK, QPSK,

16-QAM, 64-QAM

802.11n: OFDM/BPSK, QPSK,

16-QAM, 64-QAM

RF Pwr (EIRP) in dBm 802.11a: 15 dBm (typical) @

54Mbps

802.11b: 18 dBm (typical) @

11 Mbps

802.11g: 16 dBm (typical) @

54 Mbps

802.11n: 12 dBm (typical) @

130 Mbps (HT20), 270 Mbps (HT40)

Receive Sensitivity 802.11a: -72 dBm (typical) @

54 Mbps

802.11b: -85 dBm (typical) @

11 Mbps

802.11g: -73 dBm (typical) @

54 Mbps

802.11n: -70 dBm (typical) @

MCS15/2.4 GHz,

-69 dBm (typical) @

MCS15/5.0 GHz

Antenna Gain in dBi 1 (max)

Wireless Security WEP, Wi-Fi Protected Access™ 2

(WPA2)

Security Key Bits Up to 128-Bit Encryption

OS Requirements Windows XP, Vista, or Vista 64-Bit

Edition with Latest Updates (for

Setup Wizard only)

Environmental

Dimensions 6.97" x 5.04" x 2.68"

(177 x 128 x 68 mm)

Weight 10.92 oz (0.31 kg)

Certication FCC, UL/cUL, ICES-003, RSS210,

CE, Wi-Fi (IEEE 802.11a/b/g/draft n),

WPA2™, Wi-Fi Protected Setup™

Power 12V, 1A

Operating Temp. 32 to 104ºF (0 to 40ºC)

Storage Temp. -4 to 140ºF (-20 to 60ºC)

Operating Humidity 10 to 85% Noncondensing

Storage Humidity 5 to 90% Noncondensing

Specications are subject to change without notice.

Appendix C Warranty Information

4-Device Wireless-N Gaming and Video Adapter

Appendix C:

Warranty Information

Limited Warranty – USA, Canada, Asia-

Pacific (except Australia, New Zealand)

FOR CONSUMERS WHO ARE COVERED BY CONSUMER

PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY

OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF

RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY

ARE IN ADDITION TO ALL RIGHTS AND REMEDIES

CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND

REGULATIONS. THIS WARRANTY DOES NOT EXCLUDE,

LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING

OUT OF NONCONFORMITY WITH A SALES CONTRACT.

SOME COUNTRIES, STATES AND PROVINCES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON

HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY

LAST, SO THE LIMITATIONS OR EXCLUSIONS DESCRIBED

BELOW MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE OR

PROVINCE. THIS LIMITED WARRANTY IS GOVERNED BY

AND CONSTRUED UNDER THE LAWS OF THE COUNTRY IN

WHICH THE PRODUCT PURCHASE TOOK PLACE.

This warranty is provided to you by Cisco Systems, Inc.

or its subsidiary instead of Cisco Systems, Inc. (“Cisco”).

Cisco warrants the hardware in this Cisco product against

defects in materials and workmanship under normal

use for the Warranty Period, which begins on the date of

purchase by the original end-user purchaser and lasts for

the period specified below:

•One (1) year for new product

•Ninety (90) days for refurbished product

Your exclusive remedy and Cisco’s entire liability under

this limited warranty will be for Cisco, at its option, to

(a) repair the product with new or refurbished parts,

(b) replace the product with a reasonably available

equivalent new or refurbished Cisco product, or (c) refund

the purchase price of the product less any rebates. Any

repaired or replacement products will be warranted for

the remainder of the original Warranty Period or thirty (30)

days, whichever is longer. All products and parts that are

replaced become the property of Cisco.

Cisco additionally warrants that any media on which the

software may be provided will be free from defects in

materials and workmanship under normal use for a period

of ninety (90) days from the date of original purchase.

Your exclusive remedy and Cisco’ entire liability under

this limited warranty will be for Cisco, at its option, to (a)

replace the software media, or (b) refund the purchase

price of the software media.

Exclusions and Limitations

This limited warranty does not apply if: (a) the product

assembly seal has been removed or damaged, (b) the

product has been altered or modified, except by Cisco, (c)

the product damage was caused by use with non-Cisco

products, (d) the product has not been installed, operated,

repaired, or maintained in accordance with instructions

supplied by Cisco, (e) the product has been subjected to

abnormal physical or electrical stress, misuse, negligence,

or accident, (f) the serial number on the Product has been

altered, defaced, or removed, or (g) the product is supplied

or licensed for beta, evaluation, testing or demonstration

purposes for which Cisco does not charge a purchase

price or license fee.

EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET

FORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, ALL SOFTWARE AND SERVICES

PROVIDED BY CISCO WITH THE PRODUCT, WHETHER

FACTORY LOADED ON THE PRODUCT OR CONTAINED ON

MEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED “AS

IS” WITHOUT WARRANTY OF ANY KIND. Without limiting

the foregoing, Cisco does not warrant that the operation

of the product, software or services will be uninterrupted

or error free. Also, due to the continual development

of new techniques for intruding upon and attacking

networks, Cisco does not warrant that the product,

software or services, or any equipment, system or network

on which the product, software or services are used will

be free of vulnerability to intrusion or attack. The product

may include or be bundled with third party software or

service offerings. This limited warranty shall not apply to

such third party software or service offerings. This limited

warranty does not guarantee any continued availability

of a third party’s service for which this product’s use or

operation may require.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE

LAW, ALL IMPLIED WARRANTIES AND CONDITIONS

OF MERCHANTABILITY, SATISFACTORY QUALITY OR

FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO

THE DURATION OF THE WARRANTY PERIOD. ALL OTHER

EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS

AND WARRANTIES, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE

DISCLAIMED.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,

IN NO EVENT WILL CISCO BE LIABLE FOR ANY LOST DATA,

REVENUE OR PROFIT, LOSS OF THE ABILITY TO USE ANY

THIRD PARTY PRODUCTS, SOFTWARE OR SERVICES, OR

FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL

OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY

OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT

OF OR RELATED TO THE USE OF OR INABILITY TO USE

THE PRODUCT, SOFTWARE OR ANY SERVICES PROVIDED

IN RESPECT OF SUCH PRODUCT, SOFTWARE OR SERVICE,

EVEN IF CISCO HAS BEEN ADVISED OF THE POSSIBILITY

Appendix C Warranty Information

4-Device Wireless-N Gaming and Video Adapter

OF SUCH DAMAGES. TO THE EXTENT NOT PROHIBITED

BY APPLICABLE LAW, IN NO EVENT WILL CISCO’ LIABILITY

EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.

The foregoing limitations will apply even if any warranty

or remedy provided under this limited warranty fails of its

essential purpose.

No Cisco employee, agent or reseller is authorized to

make any verbal or written modification, extension or

addition to this warranty, and Cisco expressly disclaims

any such change to this warranty. If any portion of this

limited warranty is found to be void or unenforceable, its

remaining provisions shall remain in full force and effect.

Obtaining Warranty Service

If you have a question about your product

or experience a problem with it, please go to

www.linksysbycisco.com/support where you will find a

variety of online support tools and information to assist

you with your product. If the product proves defective

during the Warranty Period, contact Cisco Technical

Support (or, if you purchased your product from a service

provider, contact the service provider) for instructions on

how to obtain warranty service. The telephone number

for Cisco Technical Support in your area can be found

by clicking the “Contact Us” link on the home page of

www.linksysbycisco.com. Have your product serial

number and proof of purchase on hand when calling. A

DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO

PROCESS WARRANTY CLAIMS. If you are requested to

return your product, you will be given a Return Materials

Authorization (RMA) number. You are responsible for

properly packaging and shipping your product at your

cost and risk. You must include the RMA number and

a copy of your dated proof of original purchase when

returning your product. Products received without a

RMA number and dated proof of original purchase will

be rejected. Do not include any other items with the

product you are returning. Defective product covered

by this limited warranty will be repaired or replaced and

returned to you without charge. Customers outside of

the United States of America and Canada are responsible

for all shipping and handling charges, custom duties,

VAT and other associated taxes and charges. Repairs or

replacements not covered under this limited warranty will

be subject to charge at Cisco’ then-current rates.

Technical Support

This limited warranty is neither a service nor a

support contract. Information about Cisco’ current

technical support offerings and policies (including

any fees for support services) can be found at

www.linksysbycisco.com/support.

Please direct all inquiries to: Cisco, P.O. Box 18558, Irvine,

CA 92623.

Limited Warranty – Europe, Middle East,

Africa, Latin America

FOR CONSUMERS WHO ARE COVERED BY CONSUMER

PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY

OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF

RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY

ARE IN ADDITION TO ALL RIGHTS AND REMEDIES

CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND

REGULATIONS. THIS WARRANTY DOES NOT EXCLUDE,

LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING

OUT OF NONCONFORMITY WITH A SALES CONTRACT.

SOME COUNTRIES, STATES AND PROVINCES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON

HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY

LAST, SO THE LIMITATIONS OR EXCLUSIONS DESCRIBED

BELOW MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE OR

PROVINCE. THIS LIMITED WARRANTY IS GOVERNED BY

AND CONSTRUED UNDER THE LAWS OF THE COUNTRY IN

WHICH THE PRODUCT PURCHASE TOOK PLACE.

This warranty is provided to you by Cisco Systems, Inc.

or its subsidiary instead of Cisco Systems, Inc. (“Cisco”).

Cisco warrants the hardware in this Cisco product against

defects in materials and workmanship under normal

use for the Warranty Period, which begins on the date of

purchase by the original end-user purchaser and lasts for

the period specified below:

•Two (2) years for new product

•Ninety (90) days for refurbished product

Your exclusive remedy and Cisco’ entire liability under

this limited warranty will be for Cisco, at its option, to

(a) repair the product with new or refurbished parts,

(b) replace the product with a reasonably available

equivalent new or refurbished Cisco product, or (c) refund

the purchase price of the product less any rebates. Any

repaired or replacement products will be warranted for

the remainder of the original Warranty Period or thirty (30)

days, whichever is longer. All products and parts that are

replaced become the property of Cisco.

Cisco additionally warrants that any media on which the

software may be provided will be free from defects in

materials and workmanship under normal use for a period

of ninety (90) days from the date of original purchase.

Your exclusive remedy and Cisco’ entire liability under

this limited warranty will be for Cisco, at its option, to (a)

replace the software media, or (b) refund the purchase

price of the software media.

Appendix C Warranty Information

4-Device Wireless-N Gaming and Video Adapter

Exclusions and Limitations

This limited warranty does not apply if: (a) the product

assembly seal has been removed or damaged, (b) the

product has been altered or modified, except by Cisco, (c)

the product damage was caused by use with non-Cisco

products, (d) the product has not been installed, operated,

repaired, or maintained in accordance with instructions

supplied by Cisco, (e) the product has been subjected to

abnormal physical or electrical stress, misuse, negligence,

or accident, (f) the serial number on the Product has been

altered, defaced, or removed, or (g) the product is supplied

or licensed for beta, evaluation, testing or demonstration

purposes for which Cisco does not charge a purchase

price or license fee.

EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET

FORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, ALL SOFTWARE AND SERVICES

PROVIDED BY CISCO WITH THE PRODUCT, WHETHER

FACTORY LOADED ON THE PRODUCT OR CONTAINED ON

MEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED “AS

IS” WITHOUT WARRANTY OF ANY KIND. Without limiting

the foregoing, Cisco does not warrant that the operation

of the product, software or services will be uninterrupted

or error free. Also, due to the continual development

of new techniques for intruding upon and attacking

networks, Cisco does not warrant that the product,

software or services, or any equipment, system or network

on which the product, software or services are used will

be free of vulnerability to intrusion or attack. The product

may include or be bundled with third party software or

service offerings. This limited warranty shall not apply to

such third party software or service offerings. This limited

warranty does not guarantee any continued availability

of a third party’s service for which this product’s use or

operation may require.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE

LAW, ALL IMPLIED WARRANTIES AND CONDITIONS

OF MERCHANTABILITY, SATISFACTORY QUALITY OR

FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO

THE DURATION OF THE WARRANTY PERIOD. ALL OTHER

EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS

AND WARRANTIES, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE

DISCLAIMED.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,

IN NO EVENT WILL CISCO BE LIABLE FOR ANY LOST DATA,

REVENUE OR PROFIT, LOSS OF THE ABILITY TO USE ANY

THIRD PARTY PRODUCTS, SOFTWARE OR SERVICES, OR

FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL

OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY

OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT

OF OR RELATED TO THE USE OF OR INABILITY TO USE

THE PRODUCT, SOFTWARE OR ANY SERVICES PROVIDED

IN RESPECT OF SUCH PRODUCT, SOFTWARE OR SERVICE,

EVEN IF CISCO HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. TO THE EXTENT NOT PROHIBITED

BY APPLICABLE LAW, IN NO EVENT WILL CISCO’ LIABILITY

EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. IF

YOU LIVE IN THE EUROPEAN UNION, REFERENCES IN THIS

SECTION TO “SPECIAL, INDIRECT, CONSEQUENTIAL OR

INCIDENTAL LOSSES” SHALL MEAN ANY LOSSES WHICH (i)

WERE NOT REASONABLY FORESEEABLE BY BOTH PARTIES,

AND/OR (ii) WERE KNOWN TO YOU BUT NOT TO US AND/

OR (iii) WERE REASONABLY FORESEEABLE BY BOTH PARTIES

BUT COULD HAVE BEEN PREVENTED BY YOU SUCH AS, FOR

EXAMPLE (BUT WITHOUT LIMITATION), LOSSES CAUSED

BY VIRUSES, TROJANS OR OTHER MALICIOUS PROGRAMS,

OR LOSS OF OR DAMAGE TO YOUR DATA. The foregoing

limitations will apply even if any warranty or remedy

provided under this limited warranty fails of its essential

purpose.

No Cisco employee, agent or reseller is authorized to

make any verbal or written modification, extension or

addition to this warranty, and Cisco expressly disclaims

any such change to this warranty. If any portion of this

limited warranty is found to be void or unenforceable, its

remaining provisions shall remain in full force and effect.

Obtaining Warranty Service

If you have a question about your product

or experience a problem with it, please go to

www.linksysbycisco.com/support where you will find a

variety of online support tools and information to assist

you with your product. If the product proves defective

during the Warranty Period, contact Cisco Technical

Support (or, if you purchased your product from a service

provider, contact the service provider) for instructions on

how to obtain warranty service. The telephone number

for Cisco Technical Support in your area can be found

by clicking the “Contact Us” link on the home page of

www.linksysbycisco.com. Have your product serial

number and proof of purchase on hand when calling. A

DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO

PROCESS WARRANTY CLAIMS. If you are requested to

return your product, you will be given a Return Materials

Authorization (RMA) number. You are responsible for

properly packaging and shipping your product at your

cost and risk. You must include the RMA number and

a copy of your dated proof of original purchase when

returning your product. Products received without a

RMA number and dated proof of original purchase will

be rejected. Do not include any other items with the

product you are returning. Defective product covered

by this limited warranty will be repaired or replaced and

returned to you without charge. Customers outside of

the United States of America and Canada are responsible

for all shipping and handling charges, custom duties,

VAT and other associated taxes and charges. Repairs or

replacements not covered under this limited warranty will

be subject to charge at Cisco’ then-current rates.

Appendix C Warranty Information

4-Device Wireless-N Gaming and Video Adapter

Technical Support

This limited warranty is neither a service nor a

support contract. Information about Cisco’ current

technical support offerings and policies (including

any fees for support services) can be found at

www.linksysbycisco.com/support.

Please direct all inquiries to: Cisco, P.O. Box 18558, Irvine,

CA 92623.

Limited Warranty – Australia, New Zealand

For consumers who are covered by consumer protection

laws or regulations in their country of purchase or,

if different, their country of residence, the benefits

conferred by this warranty are in addition to all rights

and remedies conveyed by such consumer protection

laws and regulations. This warranty does not exclude,

limit or suspend any rights of consumers arising out of

nonconformity with a sales contract. Nothing in this

limited warranty excludes, restricts or modifies any

condition, warranty, right or remedy implied or imposed

by any statute or regulation, including implied terms

and warranties which operate to protect the purchasers

of goods and services in various circumstances, which

cannot lawfully be excluded, restricted or modified. These

statutes and regulations include (in the case of Australia)

Part V of the Trade Practices Act 1974 (C’th of Australia) and

corresponding provisions of Australian State or Territory

legislation, and (in the case of New Zealand) the Consumer

Guarantees Act 1993 (NZ). Some countries, states and

provinces do not allow the exclusion or limitation of

incidental or consequential damages or allow limitations

on how long an implied warranty or condition may last,

so the limitations or exclusions described below may not

apply to you. This warranty gives you specific legal rights,

and you may also have other rights that vary by country,

state or province. This limited warranty is governed by

and construed under the laws of the country in which the

product purchase took place.

Subject to the foregoing and without limiting express

provisions of this limited warranty, all express or implied

representations, conditions, warranties, including but

not limited to any implied warranty of non-infringement,

and provisions whether based in statute, common law or

otherwise, relating to this Cisco hardware product, that

are not contained in this limited warranty are excluded to

the extent permitted by law.

This warranty is provided to you by Cisco Systems, Inc.

or its subsidiary instead of Cisco Systems, Inc. (“Cisco”).

Cisco warrants the hardware in this Cisco product against

defects in materials and workmanship under normal

use for the Warranty Period, which begins on the date of

purchase by the original end-user purchaser and lasts for

the period specified below:

•One (1) year for new product

•Ninety (90) days for refurbished product

Your exclusive remedy and Cisco’ entire liability under

this limited warranty will be for Cisco, at its option, to

(a) repair the product with new or refurbished parts,

(b) replace the product with a reasonably available

equivalent new or refurbished Cisco product, or (c) refund

the actual purchase price of the product (net of rebates

and discounts), or (d) pay the cost of repair of the product.

Any repaired or replacement products will be warranted

for the remainder of the original Warranty Period or thirty

(30) days, whichever is longer. All products and parts that

are replaced become the property of Cisco.

Cisco additionally warrants that any media on which the

software may be provided will be free from defects in

materials and workmanship under normal use for a period

of ninety (90) days from the date of original purchase.

Your exclusive remedy and Cisco’ entire liability under

this limited warranty will be for Cisco, at its option, to (a)

replace the software media, or (b) refund the purchase

price of the software media.

Exclusions and Limitations

This limited warranty does not apply if: (a) the product

assembly seal has been removed or damaged, (b) the

product has been altered or modified, except by Cisco, (c)

the product damage was caused by use with non-Cisco

products, (d) the product has not been installed, operated,

repaired, or maintained in accordance with instructions

supplied by Cisco, (e) the product has been subjected to

abnormal physical or electrical stress, misuse, negligence,

or accident, (f) the serial number on the Product has been

altered, defaced, or removed, or (g) the product is supplied

or licensed for beta, evaluation, testing or demonstration

purposes for which Cisco does not charge a purchase

price or license fee.

Except for the limited warranty on media set forth above

and to the maximum extent permitted by applicable

law, all software and services provided by Cisco with

the product, whether factory loaded on the product

or contained on media accompanying the product, is

provided “as is”. Without limiting the foregoing, Cisco does

not warrant that the operation of the product, software or

services will be uninterrupted or error free. Also, due to the

continual development of new techniques for intruding

upon and attacking networks, Cisco does not warrant

that the product, software or services, or any equipment,

system or network on which the product, software or

services are used will be free of vulnerability to intrusion or

attack. The product may include or be bundled with third

party software or service offerings. This limited warranty

shall not apply to such third party software or service

offerings. This limited warranty does not guarantee any

continued availability of a third party’s service for which

this product’s use or operation may require.

Appendix C Warranty Information

4-Device Wireless-N Gaming and Video Adapter

To the extent permitted by law, Cisco excludes liability

for any lost data, revenue or profit, loss of the ability to

use any third party products, software or services, and

indirect or consequential loss, whether based in statute,

common law (including negligence) or otherwise, arising

out of or related to the use of or inability to use the

product, software, or any services provided in respect of

such product, software or service, even if Cisco has been

advised of the possibility of such damages and Cisco limits

its liability to an amount not exceeding the amount paid

by you for the product.

No Cisco employee, agent or reseller is authorized to

make any verbal or written modification, extension or

addition to this warranty, and Cisco expressly disclaims

any such change to this warranty. If any portion of this

limited warranty is found to be void or unenforceable, its

remaining provisions shall remain in full force and effect.

Obtaining Warranty Service

If you have a question about your product

or experience a problem with it, please go to

www.linksysbycisco.com/support where you will find a

variety of online support tools and information to assist

you with your product. If the product proves defective

during the Warranty Period, contact Cisco Technical

Support (or, if you purchased your product from a service

provider, contact the service provider) for instructions on

how to obtain warranty service. The telephone number

for Cisco Technical Support in your area can be found

by clicking the “Contact Us” link on the home page of

www.linksysbycisco.com. Have your product serial

number and proof of purchase on hand when calling. A

DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO

PROCESS WARRANTY CLAIMS. If you are requested to

return your product, you will be given a Return Materials

Authorization (RMA) number. You are responsible for

properly packaging and shipping your product at your

cost and risk. You must include the RMA number and

a copy of your dated proof of original purchase when

returning your product. Products received without a

RMA number and dated proof of original purchase will

be rejected. Do not include any other items with the

product you are returning. Defective product covered

by this limited warranty will be repaired or replaced and

returned to you without charge. Customers outside of

the United States of America and Canada are responsible

for all shipping and handling charges, custom duties,

VAT and other associated taxes and charges. Repairs or

replacements not covered under this limited warranty will

be subject to charge at Cisco’ then-current rates.

Technical Support

This limited warranty is neither a service nor a

support contract. Information about Cisco’ current

technical support offerings and policies (including

any fees for support services) can be found at

www.linksysbycisco.com/support.

Please direct all inquiries to: Cisco, P.O. Box 18558, Irvine,

CA 92623.

Appendix D Regulatory Information

4-Device Wireless-N Gaming and Video Adapter

Appendix D:

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

This product has been tested and complies with the

specifications for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in

a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used according to the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which is found by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment or

devices

•Connect the equipment to an outlet other than the

receiver’s

•Consult a dealer or an experienced radio/TV technician

for assistance

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

For operation within the 5.15 ~ 5.25GHz frequency range,

it is restricted to indoor environments.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. End users

must follow the specific operating instructions for satisfying

RF exposure compliance. To maintain compliance with

FCC RF exposure compliance requirements, please follow

operation instruction as documented in this manual.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

This equipment should be installed and operated with

minimum distance 20cm between the radiator and your

body.

The availability of some specific channels and/or

operational frequency bands is country dependent

and is firmware programmed at the factory to match

the intended destination. The firmware setting is not

accessible by the end user.

Safety Notices

To reduce the risk of fire, use only No.26 AWG or

larger telecommunication line cord.

Do not use this product near water, for example,

in a wet basement or near a swimming pool.

Avoid using this product during an electrical

storm. There may be a remote risk of electric

shock from lightning.

Use only with UL-listed Information Technology

Equipment (ITE).

This product contains lead, known to the State

of California to cause cancer, and birth defects

or other reproductive harm. Wash hands after

handling.

Industry Canada Statement

This Class B digital apparatus complies with Canadian

ICES-003 and RSS210.

Operation is subject to the following two conditions:

1. This device may not cause interference and

2. This device must accept any interference, including

interference that may cause undesired operation of

the device.

Industry Canada Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits

set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance

20cm between the radiator and your body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Restrictions in the 5 GHz Band

1. The device for the band 5150-5250 MHz is only

for indoor usage to reduce potential for harmful

interference to co-channel mobile satellite systems.

2. This device has been designed to operate with an

antenna having a maximum gain of 3.0 dBi and 5.5dBi

at 2.4 GHz and 5 GHz respectively. Antenna having

a higher gain is strictly prohibited per regulations of

Appendix D Regulatory Information

4-Device Wireless-N Gaming and Video Adapter

Industry Canada. The required antenna impedance is

50 ohms.

3. The maximum antenna gain (please see the

table below) permitted (for devices in the bands

5250-5350 MHz and 5470-5725 MHz) to comply with

the E.I.R.P. limit:

No.

Antenna

Type

For 2.4

GHz

Gain

(dBi)

For 5

GHz

Gain

(dBi)

Antenna

Connector

1 PIFA 3.0 5.5 N/A

2 PIFA 3.0 5.5 N/A

3 PIFA 3.0 5.5 N/A

Because high power radars are allocated as primary users

(meaning they have priority) in 5250-5350 MHz and

5650-5850 MHz, these radars could cause interference

and/or damage to licensed exempt LAN devices.

Additional requirements for the band 5600-5650 MHz:

Until further notice, devices subject to this Section shall

not be capable of transmitting in the band 5600-5650 MHz,

so that Environment Canada weather radars operating in

this band are protected.

Avis d’Industrie Canada

Cet appareil numérique de la classe B est conforme aux

normes NMB-003 et RSS210 du Canada.

L’utilisation de ce dispositif est autorisée seulement aux

conditions suivantes :

1. il ne doit pas produire de brouillage et

2. il doit accepter tout brouillage radioélectrique reçu,

même si ce brouillage est susceptible de compromettre

le fonctionnement du dispositif.

Avis d’Industrie Canada concernant l’exposition

aux radiofréquences :

Ce matériel est conforme aux limites d’exposition aux

radiofréquences établies par Industrie Canada pour

un environnement non contrôlé. Cet appareil doit être

installé et utilisé à une distance minimum de 20 cm entre

le radiateur et de votre corps.

L’émetteur ne doit pas être placé près d’une autre antenne

ou d’un autre émetteur, ou fonctionner avec une autre

antenne ou un autre émetteur.

Restrictions dans la bande 5 GHz

1. L’appareil pour la bande de 5 150 à 5 250 MHz est

conçu pour usage à l’intérieur seulement afin de

réduire le potentiel d’interférences pour les systèmes

mobiles par satellite qui utilisent le même canal.

2. Cet appareil est conçu pour fonctionner avec une

antenne ayant un gain maximal de 3,0 dBi à 2,4 GHz

et de 5,5 dBi à 5 GHz. Les antennes ayant un gain plus

élevé sont strictement interdites par Industrie Canada.

L’impédance d’antenne requise est de 50 ohms.

3. Le tableau ci-dessous indique le gain d’antenne

maximal pour les bandes 5 250-5 350 MHz et 5 470-

5 725 MHz afin d’assurer la conformité aux limites

PIRE:

N°

Type

d’antenne

Pour

gain de

2,4 GHz

(dBi)

Pour

gain de

5 GHz

(dBi)

Connecteur

d’antenne

1 PIFA 3,0 5,5 S.O.

2 PIFA 3,0 5,5 S.O.

3 PIFA 3,0 5,5 S.O.

Du fait que les radars haute puissance ont la priorité

dans les bandes 5 250-5 350 MHz et 5 650-5 850 MHz, ils

pourraient causer des interférences ou endommager les

périphériques réseau sans fil.

Autres restrictions pour la bande 5 600-5 650 MHz : sauf

avis contraire, les périphériques concernés par cette

section ne doivent pas être capables de transmettre dans

la bande 5 600-5 650 MHz afin de protéger les radars

d’Environnement Canada qui l’utilisent.

Wireless Disclaimer

The maximum performance for wireless is derived from

IEEE Standard 802.11 specifications. Actual performance

can vary, including lower wireless network capacity,

data throughput rate, range and coverage. Performance

depends on many factors, conditions and variables,

including distance from the access point, volume of

network traffic, building materials and construction,

operating system used, mix of wireless products used,

interference and other adverse conditions.

Avis de non-responsabilité concernant les

appareils sans fil

Les performances maximales pour les réseaux sans fil

sont tirées des spécifications de la norme IEEE 802.11.

Les performances réelles peuvent varier, notamment

en fonction de la capacité du réseau sans fil, du débit

de la transmission de données, de la portée et de la

couverture. Les performances dépendent de facteurs,

conditions et variables multiples, en particulier de la

distance par rapport au point d’accès, du volume du trafic

réseau, des matériaux utilisés dans le bâtiment et du

type de construction, du système d’exploitation et de la

combinaison de produits sans fil utilisés, des interférences

et de toute autre condition défavorable.

Appendix D Regulatory Information

4-Device Wireless-N Gaming and Video Adapter

User Information for Consumer Products

Covered by EU Directive 2002/96/EC on

Waste Electric and Electronic Equipment

(WEEE)

This document contains important information for users

with regards to the proper disposal and recycling of

Linksys products. Consumers are required to comply with

this notice for all electronic products bearing the following

symbol:

English - Environmental Information for Customers in

the European Union

European Directive 2002/96/EC requires that the equipment

bearing this symbol on the product and/or its packaging must

not be disposed of with unsorted municipal waste. The symbol

indicates that this product should be disposed of separately

from regular household waste streams. It is your responsibility to

dispose of this and other electric and electronic equipment via

designated collection facilities appointed by the government or

local authorities. Correct disposal and recycling will help prevent

potential negative consequences to the environment and

human health. For more detailed information about the disposal

of your old equipment, please contact your local authorities,

waste disposal service, or the shop where you purchased the

product.

Български (Bulgarian) - Информация относно

опазването на околната среда за потребители в

Европейския съюз

Европейска директива 2002/96/EC изисква уредите, носещи

този символ върху изделието и/или опаковката му, да не

се изхвърля т с несортирани битови отпадъци. Символът

обозначава, че изделието трябва да се изхвърля отделно от

сметосъбирането на обикновените битови отпадъци. Ваша

е отговорността този и другите електрически и електронни

уреди да се изхвърлят в предварително определени от

държавните или общински органи специализирани пунктове

за събиране. Правилното изхвърляне и рециклиране

ще спомогнат да се предотвратят евентуални вредни за

околната среда и здравето на населението последствия. За

по-подробна информация относно изхвърлянето на вашите

стари уреди се обърнете към местните власти, службите за

сметосъбиране или магазина, от който сте закупили уреда.

Čeština (Czech) - Informace o ochraně životního

prostředí pro zákazníky v zemích Evropské unie

Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené

tímto symbolem na produktu anebo na obalu bylo likvidováno

s netříděným komunálním odpadem. Tento symbol udává,

že daný produkt musí být likvidován odděleně od běžného

komunálního odpadu. Odpovídáte za likvidaci tohoto produktu

a dalších elektrických a elektronických zařízení prostřednictvím

určených sběrných míst stanovených vládou nebo místními

úřady. Správná likvidace a recyklace pomáhá předcházet

potenciálním negativním dopadům na životní prostředí a lidské

zdraví. Podrobnější informace o likvidaci starého vybavení si

laskavě vyžádejte od místních úřadů, podniku zabývajícího se

likvidací komunálních odpadů nebo obchodu, kde jste produkt

zakoupili.

Dansk (Danish) - Miljøinformation for kunder i EU

EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol

på produktet og/eller emballagen ikke må bortskaffes som

usorteret kommunalt affald. Symbolet betyder, at dette produkt

skal bortskaffes adskilt fra det almindelige husholdningsaffald.

Det er dit ansvar at bortskaffe dette og andet elektrisk og

elektronisk udstyr via bestemte indsamlingssteder udpeget

af staten eller de lokale myndigheder. Korrekt bortskaffelse

og genvinding vil hjælpe med til at undgå mulige skader for

miljøet og menneskers sundhed. Kontakt venligst de lokale

myndigheder, renovationstjenesten eller den butik, hvor du

har købt produktet, angående mere detaljeret information om

bortskaffelse af dit gamle udstyr.

Deutsch (German) - Umweltinformation für Kunden

innerhalb der Europäischen Union

Die Europäische Richtlinie 2002/96/EC verlangt, dass technische

Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit

diesem Symbol versehen ist , nicht zusammen mit unsortiertem

Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf

hin, dass das Produkt von regulärem Haushaltmüll getrennt

entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses

Gerät und andere elektrische und elektronische Geräte über

die dafür zuständigen und von der Regierung oder örtlichen

Behörden dazu bestimmten Sammelstellen zu entsorgen.

Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,

potentielle negative Folgen für Umwelt und die menschliche

Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur

Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an

die örtlichen Behörden oder städtischen Entsorgungsdienste

oder an den Händler, bei dem Sie das Produkt erworben haben.

Appendix D Regulatory Information

4-Device Wireless-N Gaming and Video Adapter

Eesti (Estonian) - Keskkonnaalane informatsioon

Euroopa Liidus asuvatele klientidele

Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on

seadmeid, millel on tootel või pakendil käesolev sümbol ,

keelatud kõrvaldada koos sorteerimata olmejäätmetega. See

sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest

olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva

ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike

ametiasutuste poolt ette nähtud kogumispunktide kaudu.

Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida

võimalikke negatiivseid tagajärgi keskkonnale ning inimeste

tervisele. Vanade seadmete kõrvaldamise kohta täpsema

informatsiooni saamiseks võtke palun ühendust kohalike

ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te

toote ostsite.

Español (Spanish) - Información medioambiental para

clientes de la Unión Europea

La Directiva 2002/96/CE de la UE exige que los equipos que

lleven este símbolo en el propio aparato y/o en su embalaje

no deben eliminarse junto con otros residuos urbanos no

seleccionados. El símbolo indica que el producto en cuestión

debe separarse de los residuos domésticos convencionales con

vistas a su eliminación. Es responsabilidad suya desechar este y

cualesquiera otros aparatos eléctricos y electrónicos a través de

los puntos de recogida que ponen a su disposición el gobierno y

las autoridades locales. Al desechar y reciclar correctamente estos

aparatos estará contribuyendo a evitar posibles consecuencias

negativas para el medio ambiente y la salud de las personas. Si

desea obtener información más detallada sobre la eliminación

segura de su aparato usado, consulte a las autoridades locales,

al servicio de recogida y eliminación de residuos de su zona o

pregunte en la tienda donde adquirió el producto.

Ελληνικά (Greek) - Στοιχεία περιβαλλοντικής

προστασίας για πελάτες εντός της Ευρωπαϊκής

Ένωσης

Σύμφωνα με την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισμός που

φέρει αυτό το σύμβολο στο προϊόν ή/και τη συσκευασία του

δεν πρέπει να απορρίπτεται μαζί με τα μη διαχωρισμένα αστικά

απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα

πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά

απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος

και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των

καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων,

οι οποίες ορίζονται από το κράτος ή τις αρμόδιες τοπικές αρχές.

Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη

ενδεχόμενων αρνητικών επιπτώσεων στο περιβάλλον και την

υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη

του παλαιού σας εξοπλισμού, επικοινωνήστε με τις τοπικές αρχές,

τις υπηρεσίες αποκομιδής απορριμμάτων ή το κατάστημα από

το οποίο αγοράσατε το προϊόν.

Français (French) - Informations environnementales

pour les clients de l’Union européenne

La directive européenne 2002/96/CE exige que l’équipement

sur lequel est apposé ce symbole sur le produit et/ou son

emballage ne soit pas jeté avec les autres ordures ménagères. Ce

symbole indique que le produit doit être éliminé dans un circuit

distinct de celui pour les déchets des ménages. Il est de votre

responsabilité de jeter ce matériel ainsi que tout autre matériel

électrique ou électronique par les moyens de collecte indiqués

par le gouvernement et les pouvoirs publics des collectivités

territoriales. L’élimination et le recyclage en bonne et due forme

ont pour but de lutter contre l’impact néfaste potentiel de ce

type de produits sur l’environnement et la santé publique. Pour

plus d’informations sur le mode d’élimination de votre ancien

équipement, veuillez prendre contact avec les pouvoirs publics

locaux, le service de traitement des déchets, ou l’endroit où vous

avez acheté le produit.

Italiano (Italian) - Informazioni relative all’ambiente

per i clienti residenti nell’Unione Europea

La direttiva europea 2002/96/EC richiede che le apparecchiature

contrassegnate con questo simbolo sul prodotto e/o

sull’imballaggio non siano smaltite insieme ai rifiuti urbani

non differenziati. Il simbolo indica che questo prodotto non

deve essere smaltito insieme ai normali rifiuti domestici. È

responsabilità del proprietario smaltire sia questi prodotti sia

le altre apparecchiature elettriche ed elettroniche mediante

le specifiche strutture di raccolta indicate dal governo o dagli

enti pubblici locali. Il corretto smaltimento ed il riciclaggio

aiuteranno a prevenire conseguenze potenzialmente negative

per l’ambiente e per la salute dell’essere umano. Per ricevere

informazioni più dettagliate circa lo smaltimento delle vecchie

apparecchiature in Vostro possesso, Vi invitiamo a contattare gli

enti pubblici di competenza, il servizio di smaltimento rifiuti o il

negozio nel quale avete acquistato il prodotto.

Latviešu valoda (Latvian) - Ekoloģiska informācija

klientiem Eiropas Savienības jurisdikcijā

Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota

zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst

izmest nešķirotā veidā kopā ar komunālajiem atkritumiem

(tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē

to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar

parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo

un citas elektriskas un elektroniskas ierīces izmest atkritumos,

izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko

nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos

un pārstrāde tiek veikta pareizi, tad mazinās iespējamais

kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par

novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt

vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā,

kur iegādājāties šo izstrādājumu.

Appendix D Regulatory Information

4-Device Wireless-N Gaming and Video Adapter

Lietuvškai (Lithuanian) - Aplinkosaugos informacija,

skirta Europos Sąjungos vartotojams

Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir

kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį),

negalima šalinti kartu su nerūšiuotomis komunalinėmis

atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai

nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad

ši ir kita elektros ar elektroninė įranga būtų šalinama per tam

tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo

sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta

galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos

apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios

institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose

įsigijote tą gaminį.

Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti

fl-Unjoni Ewropea

Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih

is-simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax

jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu

jindika li dan il-prodott għandu jintrema separatament minn ma’

l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi

dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku

permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew

mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin

jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u

għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata

dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja

lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew

il-ħanut minn fejn xtrajt il-prodott.

Magyar (Hungarian) - Környezetvédelmi információ az

európai uniós vásárlók számára

A 2002/96/EC számú európai uniós irányelv megkívánja, hogy

azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán

az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági

hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott

termék kidobásakor a szokványos háztartási hulladékelszállítási

rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön

felelõssége, hogy ezt, és más elektromos és elektronikus

berendezéseit a kormányzati vagy a helyi hatóságok által

kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ

hulladékfeldolgozás segít a környezetre és az emberi egészségre

potenciálisan ártalmas negatív hatások megelõzésében. Ha

elavult berendezéseinek felszámolásához további részletes

információra van szüksége, kérjük, lépjen kapcsolatba a helyi

hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal

üzlettel, ahol a terméket vásárolta.

Nederlands (Dutch) - Milieu-informatie voor klanten

in de Europese Unie

De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die

is voorzien van dit symbool op het product of de verpakking,

niet mag worden ingezameld met niet-gescheiden huishoudelijk

afval. Dit symbool geeft aan dat het product apart moet worden

ingezameld. U bent zelf verantwoordelijk voor de vernietiging

van deze en andere elektrische en elektronische apparatuur via de

daarvoor door de landelijke of plaatselijke overheid aangewezen

inzamelingskanalen. De juiste vernietiging en recycling van

deze apparatuur voorkomt mogelijke negatieve gevolgen voor

het milieu en de gezondheid. Voor meer informatie over het

vernietigen van uw oude apparatuur neemt u contact op met

de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de

winkel waar u het product hebt aangeschaft.

Norsk (Norwegian) - Miljøinformasjon for kunder i EU

EU-direktiv 2002/96/EF krever at utstyr med følgende symbol

avbildet på produktet og/eller pakningen, ikke må kastes

sammen med usortert avfall. Symbolet indikerer at dette

produktet skal håndteres atskilt fra ordinær avfallsinnsamling

for husholdningsavfall. Det er ditt ansvar å kvitte deg med

dette produktet og annet elektrisk og elektronisk avfall via egne

innsamlingsordninger slik myndighetene eller kommunene

bestemmer. Korrekt avfallshåndtering og gjenvinning vil

være med på å forhindre mulige negative konsekvenser for

miljø og helse. For nærmere informasjon om håndtering av

det kasserte utstyret ditt, kan du ta kontakt med kommunen,

en innsamlingsstasjon for avfall eller butikken der du kjøpte

produktet.

Polski (Polish) - Informacja dla klientów w Unii

Europejskiej o przepisach dotyczących ochrony

środowiska

Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt

oznaczony symbolem znajdującym się na produkcie i/lub jego

opakowaniu nie był wyrzucany razem z innymi niesortowanymi

odpadami komunalnymi. Symbol ten wskazuje, że produkt

nie powinien być usuwany razem ze zwykłymi odpadami z

gospodarstw domowych. Na Państwu spoczywa obowiązek

wyrzucania tego i innych urządzeń elektrycznych oraz

elektronicznych w punktach odbioru wyznaczonych przez władze

krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób

i jego recykling pomogą zapobiec potencjalnie negatywnym

konsekwencjom dla środowiska i zdrowia ludzkiego. W celu

uzyskania szczegółowych informacji o usuwaniu starego sprzętu,

prosimy zwrócić się do lokalnych władz, służb oczyszczania

miasta lub sklepu, w którym produkt został nabyty.

Appendix D Regulatory Information

4-Device Wireless-N Gaming and Video Adapter

Português (Portuguese) - Informação ambiental para

clientes da União Europeia

A Directiva Europeia 2002/96/CE exige que o equipamento

que exibe este símbolo no produto e/ou na sua embalagem

não seja eliminado junto com os resíduos municipais não

separados. O símbolo indica que este produto deve ser

eliminado separadamente dos resíduos domésticos regulares.

É da sua responsabilidade eliminar este e qualquer outro

equipamento eléctrico e electrónico através das instalações

de recolha designadas pelas autoridades governamentais ou

locais. A eliminação e reciclagem correctas ajudarão a prevenir

as consequências negativas para o ambiente e para a saúde

humana. Para obter informações mais detalhadas sobre a

forma de eliminar o seu equipamento antigo, contacte as

autoridades locais, os serviços de eliminação de resíduos ou o

estabelecimento comercial onde adquiriu o produto.

Română (Romanian) - Informaţii de mediu pentru

clienţii din Uniunea Europeană

Directiva europeană 2002/96/CE impune ca echipamentele care

prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să

nu fie casate împreună cu gunoiul menajer municipal. Simbolul

indică faptul că acest produs trebuie să fie casat separat de

gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi

acest produs şi alte echipamente electrice şi electronice prin

intermediul unităţilor de colectare special desemnate de guvern

sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta

la prevenirea potenţialelor consecinţe negative asupra sănătăţii

mediului şi a oamenilor. Pentru mai multe informaţii detaliate

cu privire la casarea acestui echipament vechi, contactaţi

autorităţile locale, serviciul de salubrizare sau magazinul de la

care aţi achiziţionat produsul.

Slovenčina (Slovak) - Informácie o ochrane životného

prostredia pre zákazníkov v Európskej únii

Podľa európskej smernice 2002/96/ES zariadenie s týmto

symbolom na produkte a/alebo jeho balení nesmie byť

likvidované spolu s netriedeným komunálnym odpadom.

Symbol znamená, že produkt by sa mal likvidovať oddelene

od bežného odpadu z domácností. Je vašou povinnosťou

likvidovať toto i ostatné elektrické a elektronické zariadenia

prostredníctvom špecializovaných zberných zariadení určených

vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia

pomôže zabrániť prípadným negatívnym dopadom na životné

prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie

informácie o likvidácii starého zariadenia, obráťte sa, prosím, na

miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov

alebo obchod, v ktorom ste si produkt zakúpili.

Slovenščina (Slovene) - Okoljske informacije za stranke

v Evropski uniji

Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s

tem simbolom – na izdelku in/ali na embalaži z nesortiranimi

komunalnimi odpadki. Ta simbol opozarja, da je treba izdelek

zavreči ločeno od preostalih gospodinjskih odpadkov. Vaša

odgovornost je, da to in preostalo električno in elektronsko

opremo oddate na posebna zbirališča, ki jih določijo državne

ustanove ali lokalne oblasti. S pravilnim odlaganjem in

recikliranjem boste preprečili morebitne škodljive vplive na

okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare

opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali

trgovino, kjer ste izdelek kupili.

Suomi (Finnish) - Ympäristöä koskevia tietoja EU-

alueen asiakkaille

EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä

symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa

ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana.

Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään

tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää

tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet

viemällä tuote tai tuotteet viranomaisten määräämään

keräyspisteeseen. Laitteiston oikea hävittäminen estää

mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten

terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta

saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä

myymälästä, josta ostit tuotteen.

Svenska (Swedish) - Miljöinformation för kunder i

Europeiska unionen

Det europeiska direktivet 2002/96/EC kräver att utrustning med

denna symbol på produkten och/eller förpackningen inte får

kastas med osorterat kommunalt avfall. Symbolen visar att denna

produkt bör kastas efter att den avskiljts från vanligt hushållsavfall.

Det faller på ditt ansvar att kasta denna och annan elektrisk och

elektronisk utrustning på fastställda insamlingsplatser utsedda

av regeringen eller lokala myndigheter. Korrekt kassering och

återvinning skyddar mot eventuella negativa konsekvenser

för miljön och personhälsa. För mer detaljerad information om

kassering av din gamla utrustning kontaktar du dina lokala

myndigheter, avfallshanteringen eller butiken där du köpte

produkten.

WEB: For additional information, please visit

www.linksysbycisco.com

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

Appendix E: Software End

User License Agreement

Cisco Products

This product from Cisco Systems, Inc. or its subsidiary

licensing the Software instead of Cisco Systems, Inc.

(“Cisco”) contains software (including firmware) originating

from Cisco and its suppliers and may also contain software

from the open source community.

Any software originating from Cisco and its suppliers is

licensed under the Cisco Software License Agreement

contained at Schedule 1 below. You may also be prompted

to review and accept the Cisco Software License Agreement

upon installation of the software. Separate terms and

features of Network Magic, a Cisco Software product, are

set forth in Schedule 2 below.

Any software from the open source community is licensed

under the specific license terms applicable to that software

made available by Cisco at www.linksysbycisco.com/gpl

or as provided for in Schedule 3 below. By using the Software,

you acknowledge that you have reviewed such license

terms and that you agree to be bound by the terms of

such licenses. Where such specific license terms entitle

you to the source code of such software, that source

code is available upon request at cost from Cisco for

at least three years from the purchase date of this

product and may also be available for download from

www.linksysbycisco.com/gpl. For detailed license terms

and additional information on open source software in

Cisco products please look at the Cisco public web site at:

www.linksysbycisco.com/gpl/ or Schedule 3 below as

applicable. If you would like a copy of the GPL or certain

other open source code in this Software on a CD, Cisco will

mail to you a CD with such code for $9.99 plus the cost of

shipping, upon request.

THIS SOFTWARE END USER LICENSE AGREEMENT IS

A LEGAL AGREEMENT BETWEEN YOU AND CISCO.

READ IT CAREFULLY BEFORE INSTALLING AND USING

THE SOFTWARE. IT PROVIDES A LICENSE TO USE THE

SOFTWARE AND CONTAINS WARRANTY INFORMATION

AND LIABILITY DISCLAIMERS. BY CHECKING THE “NEXT”

BOX, DOWNLOADING, INSTALLING OR USING THE

SOFTWARE, OR USING THE PRODUCT CONTAINING THE

SOFTWARE, YOU ARE CONFIRMING YOUR ACCEPTANCE

OF THE SOFTWARE AND CONSENTING TO BE BOUND

BY THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL

OF THESE TERMS, THEN DO NOT CLICK ON THE “NEXT”

BUTTON AND DO NOT DOWNLOAD, INSTALL OR USE THE

SOFTWARE. YOU MAY RETURN UNUSED SOFTWARE (OR,

IF THE SOFTWARE IS SUPPLIED AS PART OF ANOTHER

PRODUCT, THE UNUSED PRODUCT) FOR A FULL REFUND

UP TO 30 DAYS AFTER ORIGINAL PURCHASE, SUBJECT TO

THE RETURN PROCESS AND POLICIES OF THE PARTY FROM

WHICH YOU PURCHASED SUCH PRODUCT OR SOFTWARE.

IN THE EVENT THAT YOU HAVE ELECTED TO OBTAIN A

SUBSCRIPTION LICENSE, AS INDICATED IN YOUR ORDER,

YOU ADDITIONALLY AGREE TO BE BOUND BY THE “TERMS

OF SERVICE” SET FORTH IN SCHEDULE 2 IF APPLICABLE.

Software Licenses

The software licenses applicable to software

from Cisco are made available at the Cisco public

web site at: www.linksysbycisco.com and

www.linksysbycisco.com/gpl/ respectively. For your

convenience of reference, a copy of the Cisco Software

License Agreement and the main open source code

licenses used by Cisco in its products are contained in the

Schedules below.

Schedule 1

Cisco Software License Agreement

License. Subject to the terms and conditions of this

Agreement, Cisco grants the original end user purchaser of

the Software a nonexclusive license to (i) use the Software

solely as embedded in, as a stand-alone application or

(where authorized in the applicable documentation) for

communication with such product, each solely at Cisco’s

discretion; (ii) if the Software is purchased separately

from any Cisco Product, install the Software on personal

computers within a single household or business

location according to the maximum number of licenses

you have purchased; and (iii) make one copy of the

Software in machine-readable form and one copy of the

Documentation, solely for backup purposes. This license

may not be sublicensed, and is not transferable except

to a person or entity to which you transfer ownership of

the complete Cisco product containing the Software or

complete Software product, provided you permanently

transfer all rights under this Agreement and do not retain

any full or partial copies of the Software, and the recipient

agrees to the terms of this Agreement.

“Software” includes, and this Agreement will apply to (a)

the software of Cisco or its suppliers purchased separately

or provided in or with the applicable Cisco product, and

(b) any upgrades, updates, bug fixes or modified versions

(“Upgrades”) or backup copies of the Software supplied

to you by Cisco or an authorized reseller (whether or not

for a fee), provided you already hold a valid license to the

original software and have paid any applicable fee for the

Upgrade.

“Documentation” means all documentation and other

related materials supplied by Cisco to you pursuant to this

Agreement.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

License Restrictions. Other than as set forth in this

Agreement, you may not (i) make or distribute copies

of the Software or its related Documentation, or

electronically transfer the Software or Documentation

from one computer to another or over a network; (ii) alter,

merge, modify, adapt, decrypt or translate the Software or

related Documentation, or decompile, reverse engineer,

disassemble, or otherwise reduce the Software to a

human-perceivable form (except to the extent expressly

permitted by law notwithstanding this provision); (iii)

share, sell, rent, lease, or sublicense the Software or

related Documentation; (iv) modify the Software or create

derivative works based upon the Software; (v) if you

make a backup copy of the Software and Documentation,

you must reproduce all copyright notices and any other

proprietary legends found on the original Software and

Documentation; (vi) use the Software for management

of a business network with more than 8 computers; (vii)

use the Software under any circumstances for competitive

evaluation, including developing competing software;

(ix) to the extent permitted under applicable law, assign,

sublicense or otherwise transfer the Software unless

the prospective assignee, sublicensee or transferee

expressly agrees to all the terms and conditions under this

Agreement.

The Software and Documentation contain trade secrets

and/or copyrighted materials of Cisco or its suppliers. You

will not disclose or make available such trade secrets or

copyrighted material in any form to any third party.

In the event that you fail to comply with this Agreement,

the license granted to you will automatically terminate,

at which time you must immediately (i) stop using the

Cisco Product in which the Software is embedded, or

(ii) uninstall the Software and destroy all copies of the

Software and Documentation where the Software is

purchased separately. All other rights of both parties and

all other provisions of this Agreement will survive this

termination.

Ownership. The Software and Documentation are

licensed and not sold to you by Cisco and the relevant

third parties set forth in Schedule 3. Cisco and its licensors

retain all right, title and interest, including all copyright

and intellectual property rights, in and to, the Software

and Documentation and all copies and portions thereof.

All rights not specifically granted to you in this Agreement

are reserved by Cisco and its licensors. Your use of any

software product from an entity other than Cisco that may

have been recommended by Cisco is governed by such

software product’s end user license agreement.

Third Party Services, Links and Advertising. Cisco may

provide from within the Software links to websites or

third party software products. In addition, third party

services may be provided with the Software which may be

subject to terms and conditions from the provider of the

service. Cisco makes no representations as to the quality,

suitability, functionality, or legality of any sites or products

to which links may be provided or third party services, and

you hereby waive any claim you might have against Cisco

with respect to such sites or third party software products

or services. Your correspondence or business dealings

with, or participation in promotions of third parties found

through the Software and any other terms, conditions,

warranties, or representations associated with such

dealings, are solely between you and such third party. You

agree that Cisco is not responsible or liable for any loss

or damage of any sort incurred as the result of any such

dealings or as the result of the presence of such third party

links, products or services in the Cisco Software, and Cisco

may discontinue or modify the services or links offered at

any time.

Collection and Processing of Information. You agree

that Cisco and/or its affiliates may, from time to time,

collect and process information about your Cisco product

and/or the Software and/or your use of either in order

(i) to enable Cisco to offer you Upgrades; (ii) to provide

support and assistance with your product and/or the

Software; (iii) to ensure that your Cisco product and/or

the Software is being used in accordance with the terms

of this Agreement; (iv) to provide improvements to the

way Cisco delivers technology to you and to other Cisco

customers; (v) to provide reports regarding the status

and health of the network, including network traffic and

application usage; (vi) to enable Cisco to comply with

the terms of any agreements it has with any third parties

regarding your Cisco product and/or Software; and/or

(vii) to enable Cisco to comply with all applicable laws

and/or regulations, or the requirements of any regulatory

authority or government agency. Cisco and/ or its affiliates

may collect and process this information provided that it

does not identify you personally. You agree that Cisco has

no responsibility or liability for the deletion of or failure to

store any data or other information related to your Cisco

product, Software or related Services.

The reports feature of certain Software allows you to

monitor the activity of computers running the Software in

your home or small office. You must activate this feature in

order to receive reports. If you activate the reports feature,

you agree to the following: (a) the Software tracks and

monitors the following components and activities in your

home or office: network traffic (e.g. megabytes per hour),

application usage (the foreground window is tracked and

the time each application is in the foreground during

active usage of the computer) and internet history. (b)

For all computers on which reports feature is enabled, the

above information is transmitted to servers at Cisco and/

or a third party at periodic intervals while the computer

is online. This information is associated and stored with

the email address supplied by you when you activated

the reports feature. This information is summarized into

a formal report and is emailed to the identified email

address. © Any computer on the network running the

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

Software can enable any other computer (on the same

primary network) to generate reports. When a computer

is enabled, that computer shows a notification that it is

being monitored. As long as that computer is enabled,

each time the Software is started the user of that particular

computer will see a notification that it is being monitored

by the reports feature. Any computer on the network with

the Software installed can enable or disable any other

computer from the reports feature.

In addition, Cisco may collect and store detailed

information regarding your network configuration

and usage for the purpose of providing you technical

networking support. The information is associated with

you only when you provide a unique ID number to the

support representative while you are receiving help. The

unique ID is generated randomly on your computer upon

installation and is completely under your control.

Your use of your Cisco product and/or the Software

constitutes consent by you to Cisco’s and/or its affiliates’

collection and use of such information and, for European

Economic Area (EEA) customers, to the transfer of such

information to a location outside the EEA. Any information

collected by your Cisco product and/or the Software is

done and utilized in accordance with our Privacy Policy

available at Privacy Statement. Your election to use the

Cisco product and/or Software indicates your acceptance

of the terms of the Cisco Privacy Policy, so please review

the policy carefully and check the Web site above to

review updates to it.

Software Upgrades etc. If the Software enables you to

receive Upgrades, you may elect at any time to receive

these Upgrades either automatically or manually. If you

elect to receive Upgrades manually or you otherwise

elect not to receive or be notified of any Upgrades, you

may expose your Cisco product and/or the Software to

serious security threats and/or some features within your

Cisco product and/or Software may become inaccessible.

There may be circumstances where we apply an Upgrade

automatically in order to comply with changes in

legislation, legal, security or regulatory requirements or

as a result of requirements to comply with the terms of

any agreements Cisco has with any third parties regarding

your Cisco product and/or the Software. You will always

be notified of any Upgrades being delivered to you. The

terms of this license will apply to any such Upgrade unless

the Upgrade in question is accompanied by a separate

license, in which event the terms of that license will

apply.

Changes to Browser Settings and Error Processing. By

installing the Software, you acknowledge and agree that

the Software may change certain settings in your Internet

browser software, including the default settings for search

provider and source of DNS error pages and may direct

erroneous URLs to an error landing page hosted by Cisco.

You may opt out of these settings by not accepting them as

part of the installation process or by requesting a change

to your software settings in the error process. Installing

the software and changing these software settings may

conflict with license agreements you have entered into

with other entities, such as your Internet service provider.

Error queries that are libelous, slanderous, defamatory or

that may violate the intellectual property rights of others

may not be processed by Cisco or its suppliers.

Term and Termination. You may terminate this License

at any time by destroying all copies of the Software

and documentation. Your rights under this License will

terminate immediately without notice from Cisco if you

fail to comply with any provision of this Agreement.

Limited Warranty. Cisco additionally warrants that any

media on which the Software may be provided will be

free from defects in materials and workmanship under

normal use for a period of ninety (90) days from the date

of original purchase. Your exclusive remedy and Cisco’s

entire liability under this limited warranty will be for Cisco,

at its option, to (a) replace the Software media, or (b)

refund the purchase price of the Software media.

EXCEPT FOR THE LIMITED WARRANTY ON MEDIA

SET FORTH ABOVE AND TO THE MAXIMUM EXTENT

PERMITTED BY APPLICABLE LAW, ALL SOFTWARE AND

SERVICES PROVIDED BY CISCO ARE PROVIDED “AS IS” WITH

ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND.

Without limiting the foregoing, Cisco does not warrant

that the operation of the product, software or services will

be uninterrupted or error free. Also, due to the continual

development of new techniques for intruding upon and

attacking networks, Cisco does not warrant that the

product, software or services, or any equipment, system

or network on which the product, software or services

are used will be free of vulnerability to intrusion or attack.

The product may include or be bundled with third party

software or service offerings. This limited warranty shall

not apply to such third party software or service offerings.

This limited warranty does not guarantee any continued

availability of a third party’s service for which this product’s

use or operation may require.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE

LAW, ALL IMPLIED WARRANTIES AND CONDITIONS

OF MERCHANTABILITY, SATISFACTORY QUALITY,

NONINFRINGEMENT OR FITNESS FOR A PARTICULAR

PURPOSE ARE LIMITED TO THE DURATION OF THE

WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED

CONDITIONS, REPRESENTATIONS AND WARRANTIES ARE

DISCLAIMED. Some jurisdictions do not allow limitations

on how long an implied warranty lasts, so the above

limitation may not apply to you. This limited warranty

gives you specific legal rights, and you may also have

other rights which vary by jurisdiction.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

Disclaimer of Liabilities. TO THE EXTENT NOT PROHIBITED

BY APPLICABLE LAW, IN NO EVENT WILL CISCO BE LIABLE

FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL,

INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE

DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY

(INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED

TO THE USE OF OR INABILITY TO USE THE PRODUCT,

SOFTWARE OR ANY SERVICES PROVIDED IN RESPECT

OF SUCH PRODUCT OR SOFTWARE, EVEN IF CISCO HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,

IN NO EVENT WILL CISCO’S LIABILITY EXCEED THE

AMOUNT PAID BY YOU FOR THE PRODUCT. IF YOU LIVE

IN THE EUROPEAN UNION, REFERENCES TO “SPECIAL,

INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL

DAMAGES” SHALL MEAN ANY LOSSES WHICH (i) WERE NOT

REASONABLY FORESEEABLE BY BOTH PARTIES, AND/OR (ii)

WERE KNOWN TO YOU BUT NOT TO US AND/OR (iii) WERE

REASONABLY FORESEEABLE BY BOTH PARTIES BUT COULD

HAVE BEEN PREVENTED BY YOU SUCH AS, FOR EXAMPLE

(BUT WITHOUT LIMITATION), LOSSES CAUSED BY VIRUSES,

TROJANS OR OTHER MALICIOUS PROGRAMS, OR LOSS OF

OR DAMAGE TO YOUR DATA. The foregoing limitations will

apply even if any warranty or remedy provided under this

limited warranty fails of its essential purpose.

Technical Support. This limited warranty is neither

a service nor a support contract. Information about

Cisco’s current technical support offerings and policies

(including any fees for support services) can be found at

www.linksysbycisco.com/support.

Export. Software, including technical data, may be subject

to U.S. export control laws and regulations and/or export

or import regulations in other countries. You agree to

comply strictly with all such laws and regulations.

U.S. Government Users. The Software and Documentation

qualify as “commercial items” as defined at 48 C.F.R. 2.101

and 48 C.F.R. 12.212. All Government users acquire the

Software and Documentation with only those rights

herein that apply to non-governmental customers. Use of

either the Software or Documentation or both constitutes

agreement by the Government that the Software and

Documentation are “commercial computer software”

and “commercial computer software documentation,”

and constitutes acceptance of the rights and restrictions

herein.

General Terms. This Agreement will be governed by and

construed in accordance with the laws of the State of

California, without reference to conflict of laws principles.

The United Nations Convention on Contracts for the

International Sale of Goods will not apply. If any portion

of this Agreement is found to be void or unenforceable,

the remaining provisions will remain in full force and

effect. This Agreement constitutes the entire agreement

between the parties with respect to the Software and

supersedes any conflicting or additional terms contained

in any purchase order or elsewhere.

Linksys, Cisco and the Cisco Logo and other trademarks

contained in the Software and Documentation are

trademarks or registered trademarks of Linksys, Cisco,

its licensors and third parties, as the case may be. You

may not remove or alter any trademark, trade names,

product names, logo, copyright or other proprietary

notices, legends, symbols or labels in the Software and

Documentation. This Agreement does not authorize

you to use Cisco’s or its licensors’ names or respective

trademarks.

END OF SCHEDULE 1

Schedule 2

Network Magic Features

Network Magic License Restrictions. Other than as

set forth in this Agreement or as otherwise permitted

by Cisco, you may not install or execute the Network

Magic Software on any non-personal computer product,

including, but not limited to, a Web appliance, set top box,

handheld device, phone, Web pad device, or any device

running the Microsoft Windows CE operating system.

of Service only apply if you have obtained a subscription

license to Network Magic as specified in your order. Such

subscription licenses may subject you to fees which you

are responsible for paying in order to continue to subscribe

to the Services.

1. Network Magic Cancellation. You may cancel the

Services at any time. If you cancel the Services, Cisco

will not be obligated to provide you any Network Magic

product Upgrades. If you cancel the Services, Cisco may

delete data relating to you or your use of the Services

from Cisco or its suppliers’ servers. To the extent not

prohibited by applicable law, you understand and agree

that cancellation of your Services is your sole remedy with

respect to any dispute with Cisco.

2. Modifications. Cisco may modify or cancel the terms

of this Agreement or the price, content, or nature of the

Services (including discontinuing the Services program),

upon notice to you. If Cisco modifies any of these

terms, you may cancel the Service by providing written

notice to Cisco via www.networkmagic.com/support

of such cancellation and uninstalling the Software and

discontinuing your use of the Service. Cisco may provide

notice by e-mail, via Network Magic, or by publishing the

changes on its Web site.

3. Email Notification. Cisco may send you email from

time to time to let you know about new products and

services that are available to you. You will be able to opt-

out of receiving these emails using the link provided

within the email. Cisco reserves the right, however, to

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

send you Service related email messages as long as you

are a subscriber to the Service. If you wish to opt-out

of receiving Service related email messages, you may

cancel the Service by providing written notice via www.

networkmagic.com/support to Cisco of such cancellation

and uninstalling the Software and discontinuing your use

of the Service.

END OF SCHEDULE 2

Schedule 3

Open Source and Third Party Licenses

Schedule 3-A

If this Cisco product contains open source software

licensed under Version 2 of the “GNU General Public

License” then the license terms below in this Schedule 3-A

will apply to that open source software. The license terms

below in this Schedule 3-A are from the public web site at

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,

USA

Everyone is permitted to copy and distribute verbatim

copies of this license document, but changing it is not

allowed.

Preamble

The licenses for most software are designed to take away

your freedom to share and change it. By contrast, the

GNU General Public License is intended to guarantee your

freedom to share and change free software—to make

sure the software is free for all its users. This General Public

License applies to most of the Free Software Foundation’s

software and to any other program whose authors

commit to using it. (Some other Free Software Foundation

software is covered by the GNU Lesser General Public

License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to

freedom, not price. Our General Public Licenses are

designed to make sure that you have the freedom to

distribute copies of free software (and charge for this

service if you wish), that you receive source code or can

get it if you want it, that you can change the software or

use pieces of it in new free programs; and that you know

you can do these things.

To protect your rights, we need to make restrictions that

forbid anyone to deny you these rights or to ask you to

surrender the rights. These restrictions translate to certain

responsibilities for you if you distribute copies of the

software, or if you modify it.

For example, if you distribute copies of such a program,

whether gratis or for a fee, you must give the recipients

all the rights that you have. You must make sure that they,

too, receive or can get the source code. And you must

show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the

software, and (2) offer you this license which gives you

legal permission to copy, distribute and/or modify the

software.

Also, for each author’s protection and ours, we want to

make certain that everyone understands that there is no

warranty for this free software. If the software is modified

by someone else and passed on, we want its recipients

to know that what they have is not the original, so that

any problems introduced by others will not reflect on the

original authors’ reputations.

Finally, any free program is threatened constantly by

software patents. We wish to avoid the danger that

redistributors of a free program will individually obtain

patent licenses, in effect making the program proprietary.

To prevent this, we have made it clear that any patent must

be licensed for everyone’s free use or not licensed at all.

The precise terms and conditions for copying, distribution

and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND

MODIFICATION

0. This License applies to any program or other work

which contains a notice placed by the copyright

holder saying it may be distributed under the terms

of this General Public License. The “Program”, below,

refers to any such program or work, and a “work

based on the Program” means either the Program

or any derivative work under copyright law: that is

to say, a work containing the Program or a portion

of it, either verbatim or with modifications and/

or translated into another language. (Hereinafter,

translation is included without limitation in the term

“modification”.) Each licensee is addressed as “you”.

Activities other than copying, distribution and

modification are not covered by this License; they

are outside its scope. The act of running the Program

is not restricted, and the output from the Program is

covered only if its contents constitute a work based on

the Program (independent of having been made by

running the Program). Whether that is true depends

on what the Program does.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

1. You may copy and distribute verbatim copies of the

Program’s source code as you receive it, in any medium,

provided that you conspicuously and appropriately

publish on each copy an appropriate copyright notice

and disclaimer of warranty; keep intact all the notices

that refer to this License and to the absence of any

warranty; and give any other recipients of the Program

a copy of this License along with the Program.

You may charge a fee for the physical act of transferring

a copy, and you may at your option offer warranty

protection in exchange for a fee. .

2. You may modify your copy or copies of the Program

or any portion of it, thus forming a work based on the

Program, and copy and distribute such modifications

or work under the terms of Section 1 above, provided

that you also meet all of these conditions:

a) You must cause the modified files to carry

prominent notices stating that you changed the

files and the date of any change.

b) You must cause any work that you distribute or

publish, that in whole or in part contains or is

derived from the Program or any part thereof, to be

licensed as a whole at no charge to all third parties

under the terms of this License.

c) If the modified program normally reads commands

interactively when run, you must cause it, when

started running for such interactive use in the most

ordinary way, to print or display an announcement

including an appropriate copyright notice and

a notice that there is no warranty (or else, saying

that you provide a warranty) and that users may

redistribute the program under these conditions,

and telling the user how to view a copy of

this License. (Exception: if the Program itself is

interactive but does not normally print such an

announcement, your work based on the Program

is not required to print an announcement.)

These requirements apply to the modified work as

a whole. If identifiable sections of that work are not

derived from the Program, and can be reasonably

considered independent and separate works in

themselves, then this License, and its terms, do not

apply to those sections when you distribute them as

separate works. But when you distribute the same

sections as part of a whole which is a work based on

the Program, the distribution of the whole must be on

the terms of this License, whose permissions for other

licensees extend to the entire whole, and thus to each

and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights

or contest your rights to work written entirely by you;

rather, the intent is to exercise the right to control the

distribution of derivative or collective works based on

the Program.

In addition, mere aggregation of another work not

based on the Program with the Program (or with a

work based on the Program) on a volume of a storage

or distribution medium does not bring the other work

under the scope of this License.

3. You may copy and distribute the Program (or a

work based on it, under Section 2) in object code or

executable form under the terms of Sections 1 and 2

above provided that you also do one of the following:

a) Accompany it with the complete corresponding

machine-readable source code, which must be

distributed under the terms of Sections 1 and 2

above on a medium customarily used for software

interchange; or,

b) Accompany it with a written offer, valid for at least

three years, to give any third party, for a charge

no more than your cost of physically performing

source distribution, a complete machine-readable

copy of the corresponding source code, to be

distributed under the terms of Sections 1 and 2

above on a medium customarily used for software

interchange; or,

c) Accompany it with the information you received as

to the offer to distribute corresponding source code.

(This alternative is allowed only for noncommercial

distribution and only if you received the program

in object code or executable form with such an

offer, in accord with Subsection b above.)

The source code for a work means the preferred form

of the work for making modifications to it. For an

executable work, complete source code means all

the source code for all modules it contains, plus any

associated interface definition files, plus the scripts

used to control compilation and installation of the

executable. However, as a special exception, the source

code distributed need not include anything that is

normally distributed (in either source or binary form)

with the major components (compiler, kernel, and so

on) of the operating system on which the executable

runs, unless that component itself accompanies the

executable.

If distribution of executable or object code is made

by offering access to copy from a designated place,

then offering equivalent access to copy the source

code from the same place counts as distribution of

the source code, even though third parties are not

compelled to copy the source along with the object

code.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

4. You may not copy, modify, sublicense, or distribute

the Program except as expressly provided under

this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will

automatically terminate your rights under this License.

However, parties who have received copies, or rights,

from you under this License will not have their licenses

terminated so long as such parties remain in full

compliance.

5. You are not required to accept this License, since you

have not signed it. However, nothing else grants you

permission to modify or distribute the Program or its

derivative works. These actions are prohibited by law if

you do not accept this License. Therefore, by modifying

or distributing the Program (or any work based on the

Program), you indicate your acceptance of this License

to do so, and all its terms and conditions for copying,

distributing or modifying the Program or works based

on it.

6. Each time you redistribute the Program (or any work

based on the Program), the recipient automatically

receives a license from the original licensor to copy,

distribute or modify the Program subject to these

terms and conditions. You may not impose any further

restrictions on the recipients’ exercise of the rights

granted herein. You are not responsible for enforcing

compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation

of patent infringement or for any other reason (not

limited to patent issues), conditions are imposed on

you (whether by court order, agreement or otherwise)

that contradict the conditions of this License, they do

not excuse you from the conditions of this License. If

you cannot distribute so as to satisfy simultaneously

your obligations under this License and any other

pertinent obligations, then as a consequence you

may not distribute the Program at all. For example,

if a patent license would not permit royalty-free

redistribution of the Program by all those who receive

copies directly or indirectly through you, then the only

way you could satisfy both it and this License would be

to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or

unenforceable under any particular circumstance,

the balance of the section is intended to apply and

the section as a whole is intended to apply in other

circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims or

to contest validity of any such claims; this section has

the sole purpose of protecting the integrity of the free

software distribution system, which is implemented

by public license practices. Many people have

made generous contributions to the wide range of

software distributed through that system in reliance

on consistent application of that system; it is up to

the author/donor to decide if he or she is willing to

distribute software through any other system and a

licensee cannot impose that choice.

This section is intended to make thoroughly clear

what is believed to be a consequence of the rest of this

License.

8. If the distribution and/or use of the Program is

restricted in certain countries either by patents or by

copyrighted interfaces, the original copyright holder

who places the Program under this License may add an

explicit geographical distribution limitation excluding

those countries, so that distribution is permitted only

in or among countries not thus excluded. In such case,

this License incorporates the limitation as if written in

the body of this License.

9. The Free Software Foundation may publish revised

and/or new versions of the General Public License

from time to time. Such new versions will be similar in

spirit to the present version, but may differ in detail to

address new problems or concerns.

Each version is given a distinguishing version number.

If the Program specifies a version number of this

License which applies to it and “any later version”, you

have the option of following the terms and conditions

either of that version or of any later version published

by the Free Software Foundation. If the Program does

not specify a version number of this License, you

may choose any version ever published by the Free

Software Foundation.

10. If you wish to incorporate parts of the Program into

other free programs whose distribution conditions are

different, write to the author to ask for permission. For

software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation; we

sometimes make exceptions for this. Our decision will

be guided by the two goals of preserving the free status

of all derivatives of our free software and of promoting

the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE

EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT

WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT

HOLDERS AND/OR OTHER PARTIES PROVIDE THE

PROGRAM “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE PROGRAM IS WITH YOU.

SHOULD THE PROGRAM PROVE DEFECTIVE, YOU

ASSUME THE COST OF ALL NECESSARY SERVICING,

REPAIR OR CORRECTION.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,

OR ANY OTHER PARTY WHO MAY MODIFY AND/OR

REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE,

BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OR INABILITY TO

USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO

LOSS OF DATA OR DATA BEING RENDERED INACCURATE

OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR

A FAILURE OF THE PROGRAM TO OPERATE WITH ANY

OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER

PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES

END OF TERMS AND CONDITIONS

END OF SCHEDULE 3-A

Schedule 3-B

If this Cisco product contains open source software licensed

under Version 2.1 of the “GNU Lesser General Public

License” then the license terms below in this Schedule 3-B

will apply to that open source software. The license terms

below in this Schedule 3-B are from the public web site at

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301

USA

Everyone is permitted to copy and distribute verbatim

copies of this license document, but changing it is not

allowed.

[This is the first released version of the Lesser GPL. It also

counts as the successor of the GNU Library Public License,

version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away

your freedom to share and change it. By contrast, the GNU

General Public Licenses are intended to guarantee your

freedom to share and change free software—to make

sure the software is free for all its users.

This license, the Lesser General Public License, applies to

some specially designated software packages—typically

libraries—of the Free Software Foundation and other

authors who decide to use it. You can use it too, but we

suggest you first think carefully about whether this license

or the ordinary General Public License is the better strategy

to use in any particular case, based on the explanations

below.

When we speak of free software, we are referring to

freedom of use, not price. Our General Public Licenses

are designed to make sure that you have the freedom

to distribute copies of free software (and charge for this

service if you wish); that you receive source code or can

get it if you want it; that you can change the software and

use pieces of it in new free programs; and that you are

informed that you can do these things.

To protect your rights, we need to make restrictions that

forbid distributors to deny you these rights or to ask you

to surrender these rights. These restrictions translate to

certain responsibilities for you if you distribute copies of

the library or if you modify it.

For example, if you distribute copies of the library,

whether gratis or for a fee, you must give the recipients

all the rights that we gave you. You must make sure that

they, too, receive or can get the source code. If you link

other code with the library, you must provide complete

object files to the recipients, so that they can relink them

with the library after making changes to the library and

recompiling it. And you must show them these terms so

they know their rights.

We protect your rights with a two-step method: (1) we

which gives you legal permission to copy, distribute and/

or modify the library.

To protect each distributor, we want to make it very clear

that there is no warranty for the free library. Also, if the

library is modified by someone else and passed on, the

recipients should know that what they have is not the

original version, so that the original author’s reputation

will not be affected by problems that might be introduced

by others.

Finally, software patents pose a constant threat to the

existence of any free program. We wish to make sure

that a company cannot effectively restrict the users of

a free program by obtaining a restrictive license from a

patent holder. Therefore, we insist that any patent license

obtained for a version of the library must be consistent

with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered

by the ordinary GNU General Public License. This license,

the GNU Lesser General Public License, applies to certain

designated libraries, and is quite different from the

ordinary General Public License. We use this license for

certain libraries in order to permit linking those libraries

into non-free programs.

When a program is linked with a library, whether

statically or using a shared library, the combination of

the two is legally speaking a combined work, a derivative

of the original library. The ordinary General Public

License therefore permits such linking only if the entire

combination fits its criteria of freedom. The Lesser General

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

Public License permits more lax criteria for linking other

code with the library.

We call this license the “Lesser” General Public License

because it does Less to protect the user’s freedom than

the ordinary General Public License. It also provides

other free software developers Less of an advantage over

competing non-free programs. These disadvantages are

the reason we use the ordinary General Public License

for many libraries. However, the Lesser license provides

advantages in certain special circumstances.

For example, on rare occasions, there may be a special

need to encourage the widest possible use of a certain

library, so that it becomes a de-facto standard. To achieve

this, non-free programs must be allowed to use the library.

A more frequent case is that a free library does the same

job as widely used non-free libraries. In this case, there is

little to gain by limiting the free library to free software

only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-

free programs enables a greater number of people to use

a large body of free software. For example, permission to

use the GNU C Library in non-free programs enables many

more people to use the whole GNU operating system, as

well as its variant, the GNU/Linux operating system.

Although the Lesser General Public License is Less

protective of the users’ freedom, it does ensure that the

user of a program that is linked with the Library has the

freedom and the wherewithal to run that program using a

modified version of the Library.

The precise terms and conditions for copying, distribution

and modification follow. Pay close attention to the

difference between a “work based on the library” and a

“work that uses the library”. The former contains code

derived from the library, whereas the latter must be

combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION

AND MODIFICATION

0. This License Agreement applies to any software library

or other program which contains a notice placed by

the copyright holder or other authorized party saying

it may be distributed under the terms of this Lesser

General Public License (also called “this License”). Each

licensee is addressed as “you”.

A “library” means a collection of software functions

and/or data prepared so as to be conveniently linked

with application programs (which use some of those

functions and data) to form executables.

The “Library”, below, refers to any such software library

or work which has been distributed under these terms.

A “work based on the Library” means either the Library

or any derivative work under copyright law: that is to

say, a work containing the Library or a portion of it,

either verbatim or with modifications and/or translated

straightforwardly into another language. (Hereinafter,

translation is included without limitation in the term

“modification”.)

“Source code” for a work means the preferred form of

the work for making modifications to it. For a library,

complete source code means all the source code for

all modules it contains, plus any associated interface

definition files, plus the scripts used to control

compilation and installation of the library.

Activities other than copying, distribution and

modification are not covered by this License; they are

outside its scope. The act of running a program using

the Library is not restricted, and output from such a

program is covered only if its contents constitute a

work based on the Library (independent of the use

of the Library in a tool for writing it). Whether that is

true depends on what the Library does and what the

program that uses the Library does.

1. You may copy and distribute verbatim copies of the

Library’s complete source code as you receive it, in

any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate

intact all the notices that refer to this License and to

the absence of any warranty; and distribute a copy of

this License along with the Library.

You may charge a fee for the physical act of transferring

a copy, and you may at your option offer warranty

protection in exchange for a fee.

2. You may modify your copy or copies of the Library or

any portion of it, thus forming a work based on the

Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provided

that you also meet all of these conditions:

a) The modified work must itself be a software

library.

b) You must cause the files modified to carry

prominent notices stating that you changed the

files and the date of any change.

c) You must cause the whole of the work to be

licensed at no charge to all third parties under the

terms of this License.

d) If a facility in the modified Library refers to a function

or a table of data to be supplied by an application

program that uses the facility, other than as an

argument passed when the facility is invoked, then

you must make a good faith effort to ensure that,

in the event an application does not supply such

function or table, the facility still operates, and

performs whatever part of its purpose remains

meaningful.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

(For example, a function in a library to compute square

roots has a purpose that is entirely well-defined

independent of the application. Therefore, Subsection

2d requires that any application-supplied function or

table used by this function must be optional: if the

application does not supply it, the square root function

must still compute square roots.)

These requirements apply to the modified work as

a whole. If identifiable sections of that work are not

derived from the Library, and can be reasonably

considered independent and separate works in

themselves, then this License, and its terms, do not

apply to those sections when you distribute them as

separate works. But when you distribute the same

sections as part of a whole which is a work based on

the Library, the distribution of the whole must be on

the terms of this License, whose permissions for other

licensees extend to the entire whole, and thus to each

and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights

or contest your rights to work written entirely by you;

rather, the intent is to exercise the right to control the

distribution of derivative or collective works based on

the Library.

In addition, mere aggregation of another work not

based on the Library with the Library (or with a work

based on the Library) on a volume of a storage or

distribution medium does not bring the other work

under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU

General Public License instead of this License to a

given copy of the Library. To do this, you must alter all

the notices that refer to this License, so that they refer

to the ordinary GNU General Public License, version

2, instead of to this License. (If a newer version than

version 2 of the ordinary GNU General Public License

has appeared, then you can specify that version

instead if you wish.) Do not make any other change in

these notices.

Once this change is made in a given copy, it is

irreversible for that copy, so the ordinary GNU General

Public License applies to all subsequent copies and

derivative works made from that copy.

This option is useful when you wish to copy part of the

code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion

or derivative of it, under Section 2) in object code or

executable form under the terms of Sections 1 and

2 above provided that you accompany it with the

complete corresponding machine-readable source

code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used

for software interchange.

If distribution of object code is made by offering

access to copy from a designated place, then offering

equivalent access to copy the source code from the

same place satisfies the requirement to distribute

the source code, even though third parties are not

compelled to copy the source along with the object

code.

5. A program that contains no derivative of any portion

of the Library, but is designed to work with the Library

by being compiled or linked with it, is called a “work

that uses the Library”. Such a work, in isolation, is not

a derivative work of the Library, and therefore falls

outside the scope of this License.

However, linking a “work that uses the Library” with

the Library creates an executable that is a derivative

of the Library (because it contains portions of the

Library), rather than a “work that uses the library”. The

executable is therefore covered by this License. Section

6 states terms for distribution of such executables.

When a “work that uses the Library” uses material from

a header file that is part of the Library, the object code

for the work may be a derivative work of the Library

even though the source code is not. Whether this is

true is especially significant if the work can be linked

without the Library, or if the work is itself a library. The

threshold for this to be true is not precisely defined by

law.

If such an object file uses only numerical parameters,

data structure layouts and accessors, and small macros

and small inline functions (ten lines or less in length),

then the use of the object file is unrestricted, regardless

of whether it is legally a derivative work. (Executables

containing this object code plus portions of the Library

will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you

may distribute the object code for the work under the

terms of Section 6. Any executables containing that

work also fall under Section 6, whether or not they are

linked directly with the Library itself.

6. As an exception to the Sections above, you may also

combine or link a “work that uses the Library” with the

Library to produce a work containing portions of the

Library, and distribute that work under terms of your

choice, provided that the terms permit modification

of the work for the customer’s own use and reverse

engineering for debugging such modifications.

You must give prominent notice with each copy of

the work that the Library is used in it and that the

Library and its use are covered by this License. You

must supply a copy of this License. If the work during

execution displays copyright notices, you must include

the copyright notice for the Library among them, as

well as a reference directing the user to the copy of this

License. Also, you must do one of these things:

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

a) Accompany the work with the complete

corresponding machine-readable source code

for the Library including whatever changes were

used in the work (which must be distributed

under Sections 1 and 2 above); and, if the work

is an executable linked with the Library, with the

complete machine-readable “work that uses the

Library”, as object code and/or source code, so that

the user can modify the Library and then relink

to produce a modified executable containing the

modified Library. (It is understood that the user

who changes the contents of definitions files in the

Library will not necessarily be able to recompile the

application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking

with the Library. A suitable mechanism is one that

(1) uses at run time a copy of the library already

present on the user’s computer system, rather than

copying library functions into the executable, and

(2) will operate properly with a modified version of

the library, if the user installs one, as long as the

modified version is interface-compatible with the

version that the work was made with.

c) Accompany the work with a written offer, valid

for at least three years, to give the same user the

materials specified in Subsection 6a, above, for a

charge no more than the cost of performing this

distribution.

d) If distribution of the work is made by offering access

to copy from a designated place, offer equivalent

access to copy the above specified materials from

the same place.

e) Verify that the user has already received a copy of

these materials or that you have already sent this

user a copy.

For an executable, the required form of the “work that

uses the Library” must include any data and utility

programs needed for reproducing the executable from

it. However, as a special exception, the materials to be

distributed need not include anything that is normally

distributed (in either source or binary form) with the

major components (compiler, kernel, and so on) of the

operating system on which the executable runs, unless

that component itself accompanies the executable.

It may happen that this requirement contradicts the

license restrictions of other proprietary libraries that

do not normally accompany the operating system.

Such a contradiction means you cannot use both

them and the Library together in an executable that

you distribute.

7. You may place library facilities that are a work based

on the Library side-by-side in a single library together

with other library facilities not covered by this License,

and distribute such a combined library, provided that

the separate distribution of the work based on the

Library and of the other library facilities is otherwise

permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the

same work based on the Library, uncombined with

any other library facilities. This must be distributed

under the terms of the Sections above.

b) Give prominent notice with the combined library of

the fact that part of it is a work based on the Library,

and explaining where to find the accompanying

uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or

distribute the Library except as expressly provided

under this License. Any attempt otherwise to copy,

modify, sublicense, link with, or distribute the Library

is void, and will automatically terminate your rights

under this License. However, parties who have received

copies, or rights, from you under this License will not

have their licenses terminated so long as such parties

remain in full compliance.

9. You are not required to accept this License, since you

have not signed it. However, nothing else grants you

permission to modify or distribute the Library or its

derivative works. These actions are prohibited by law if

you do not accept this License. Therefore, by modifying

or distributing the Library (or any work based on the

Library), you indicate your acceptance of this License

to do so, and all its terms and conditions for copying,

distributing or modifying the Library or works based

on it.

10. Each time you redistribute the Library (or any work

based on the Library), the recipient automatically

receives a license from the original licensor to copy,

distribute, link with or modify the Library subject

to these terms and conditions. You may not impose

any further restrictions on the recipients’ exercise of

the rights granted herein. You are not responsible

for enforcing compliance by third parties with this

License.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

11. If, as a consequence of a court judgment or allegation

of patent infringement or for any other reason (not

limited to patent issues), conditions are imposed on

you (whether by court order, agreement or otherwise)

that contradict the conditions of this License, they do

not excuse you from the conditions of this License. If

you cannot distribute so as to satisfy simultaneously

your obligations under this License and any other

pertinent obligations, then as a consequence you may

not distribute the Library at all. For example, if a patent

license would not permit royalty-free redistribution of

the Library by all those who receive copies directly or

indirectly through you, then the only way you could

satisfy both it and this License would be to refrain

entirely from distribution of the Library.

If any portion of this section is held invalid or

unenforceable under any particular circumstance,

the balance of the section is intended to apply, and

the section as a whole is intended to apply in other

circumstances.

It is not the purpose of this section to induce you to

infringe any patents or other property right claims or

to contest validity of any such claims; this section has

the sole purpose of protecting the integrity of the free

software distribution system which is implemented

by public license practices. Many people have

made generous contributions to the wide range of

software distributed through that system in reliance

on consistent application of that system; it is up to

the author/donor to decide if he or she is willing to

distribute software through any other system and a

licensee cannot impose that choice.

This section is intended to make thoroughly clear

what is believed to be a consequence of the rest of this

License.

12. If the distribution and/or use of the Library is restricted

in certain countries either by patents or by copyrighted

interfaces, the original copyright holder who places

the Library under this License may add an explicit

geographical distribution limitation excluding those

countries, so that distribution is permitted only in or

among countries not thus excluded. In such case, this

License incorporates the limitation as if written in the

body of this License.

13. The Free Software Foundation may publish revised

and/or new versions of the Lesser General Public

License from time to time. Such new versions will be

similar in spirit to the present version, but may differ in

detail to address new problems or concerns.

Each version is given a distinguishing version number.

If the Library specifies a version number of this License

which applies to it and “any later version”, you have the

option of following the terms and conditions either of

that version or of any later version published by the Free

Software Foundation. If the Library does not specify a

license version number, you may choose any version

ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into

other free programs whose distribution conditions are

incompatible with these, write to the author to ask for

permission. For software which is copyrighted by the

Free Software Foundation, write to the Free Software

Foundation; we sometimes make exceptions for

this. Our decision will be guided by the two goals of

preserving the free status of all derivatives of our free

software and of promoting the sharing and reuse of

software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE LIBRARY, TO THE

EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT

WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT

HOLDERS AND/OR OTHER PARTIES PROVIDE THE

LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD

THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE

COST OF ALL NECESSARY SERVICING, REPAIR OR

CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW

OR AGREED TO IN WRITING WILL ANY COPYRIGHT

HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY

AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED

ABOVE, BE LIABLE TO YOU FOR DAMAGES,

INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE

USE OR INABILITY TO USE THE LIBRARY (INCLUDING

BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING

RENDERED INACCURATE OR LOSSES SUSTAINED BY

YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY

TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

END OF SCHEDULE 3-B

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

Schedule 3-C

OPENSSL LICENSE

If this Cisco product contains open source software

licensed under the OpenSSL license:

This product includes software developed by the

OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/).

This product includes cryptographic software written

by Eric Young (eay@cryptsoft.com).

This product includes software written by Tim Hudson

(tjh@cryptsoft.com).

In addition, if this Cisco product contains open source

software licensed under the OpenSSL license then the

license terms below in this Schedule 3-C will apply to

that open source software. The license terms below

in this Schedule 3-C are from the public web site at

http://www.openssl.org/source/license.html.

The OpenSSL toolkit stays under a dual license, i.e. both

the conditions of the OpenSSL License and the original

SSLeay license apply to the toolkit. See below for the

actual license texts. Actually both licenses are BSD-style

Open Source licenses. In case of any license issues related

to OpenSSL please contact openssl-core@openssl.org.

OpenSSL License

reserved.

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the above

following disclaimer.

2. Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or

use of this software must display the following

acknowledgment: “This product includes software

developed by the OpenSSL Project for use in the

OpenSSL Toolkit. (http://www.openssl.org/)”

4. The names “OpenSSL Toolkit” and “OpenSSL Project”

must not be used to endorse or promote products

derived from this software without prior written

permission. For written permission, please contact

openssl-core@openssl.org.

5. Products derived from this software may not be called

“OpenSSL” nor may “OpenSSL” appear in their names

without prior written permission of the OpenSSL

Project.

6. Redistributions of any form whatsoever must retain

the following acknowledgment: “This product includes

software developed by the OpenSSL Project for use in

the OpenSSL Toolkit (http://www.openssl.org/)”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT

``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE

This product includes cryptographic software written by

Eric Young (eay@cryptsoft.com). This product includes

software written by Tim Hudson (tjh@cryptsoft.com).

Original SSLeay License

This package is an SSL implementation written by Eric

Young (eay@cryptsoft.com).

The implementation was written so as to conform with

Netscape’s SSL.

This library is free for commercial and non-commercial

use as long as the following conditions are adhered to.

The following conditions apply to all code found in this

distribution, be it the RC4, RSA, lhash, DES, etc., code; not

just the SSL code. The SSL documentation included with

this distribution is covered by the same copyright terms

except that the holder is Tim Hudson (tjh@cryptsoft.

com).

notices in the code are not to be removed.

If this package is used in a product, Eric Young should be

given attribution as the author of the parts of the library

used. This can be in the form of a textual message at

program startup or in documentation (online or textual)

provided with the package.

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the

following disclaimer.

Appendix E Software End User License Agreement

4-Device Wireless-N Gaming and Video Adapter

2. Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or

use of this software must display the following

acknowledgement:

“This product includes cryptographic software written

by Eric Young (eay@cryptsoft.com)”

The word ‘cryptographic’ can be left out if the routines

from the library being used are not cryptographic

related.

4. If you include any Windows specific code (or a derivative

thereof) from the apps directory (application code)

you must include an acknowledgement: “This product

includes software written by Tim Hudson (tjh@

cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY

OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The license and distribution terms for any publicly available

version or derivative of this code cannot be changed. i.e.

this code cannot simply be copied and put under another

distribution license [including the GNU Public License.]

END OF SCHEDULE 3-C

09081410NC-AI

LINKSYS WES610N 4-Port Dual-Band N Ethernet Bridge User Manual WES610N User Guide

LINKSYS LLC 4-Port Dual-Band N Ethernet Bridge WES610N User Guide

User Manual

Navigation menu

Namespaces

Views

Navigation