LINKSYS WET54GV2 Wireless-G Ethernet Bridge User Manual

LINKSYS LLC Wireless-G Ethernet Bridge

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

User manual

Instant Wireless®SeriesUse this guide to install:WET54G User GuideWireless-G Ethernet Bridge
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2003 Linksys, All RightsReserved. Instant Wireless, Linksys, and the Linksys logo are registered trademarks ofLinksys Group, Inc. Microsoft, Windows, and the Windows logo are registered trade-marks of Microsoft Corporation. All other trademarks and brand names are the propertyof their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Wireless-G Ethernet Bridge will be free from physicaldefects in material and workmanship for three years from the date of purchase, whenused within the limits set forth in the Specifications section of this User Guide. This Warranty is valid and may be processed only in the country of purchase.If the product proves defective during this warranty period, go to the Linksys website atwww.linksys.comfor complete RMA (Return Merchandise Authorization) assistance. Youcan also call Linksys Technical Support in order to obtain a RMA Number. BE SURE TOHAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT’S PACK-AGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSEDWITHOUT PROOF OF PURCHASE. When returning a product, mark the RMA Numberclearly on the outside of the package and include a copy of your original proof of pur-chase. All customers located outside of the United States of America and Canada shallbe held responsible for shipping and handling charges.IN NO EVENT SHALL LINKSYS’S LIABILITY EXCEED THE PRICE PAID FOR THE PROD-UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANYPRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-ry, with respect to its products or the contents or use of this documentation and allaccompanying software, and specifically disclaims its quality, performance, mer-chantability, or fitness for any particular purpose. Linksys reserves the right to revise orupdate its products, software, or documentation without obligation to notify any individ-ual or entity. Please direct all inquiries to:Linksys P.O. Box 18558, Irvine, CA 92623. SAFETY AND REGULATORY NOTICESFCC STATEMENTThis Wireless-G Ethernet Bridge has been tested and complies with the specifications fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used according to the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a par-ticular installation. If this equipment does cause harmful interference to radio or televisionreception, which is found by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment or devices• Connect the equipment to an outlet other than the receiver’s• Consult a dealer or an experienced radio/TV technician for assistanceFCC Caution: Any change or modification to the product not expressly approved byLinksys could void the user’s authority to operate the device.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance20cm between the radiator and your body.• Access points with 2.4 GHz or 5 GHz integrated antenna must operate with a sepa-ration distance of at least 20 cm from all persons using the cable provided and mustnot be co-located or operating in conjunction with any other antenna or transmitter.End-users must be provided with specific operations for satisfying RF exposure compli-ance. And Linksys, LLC declare that WPC54GV1.2 (Wireless-G Ethernet Bridge ) islimited in CH1~CH11 by specified firmware controlled in U.S.A. INDUSTRY CANADA (CANADA)This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.The use of this device in a system operating either partially or completely outdoors mayrequire the user to obtain a license for the system according to the Canadian regulations.EC DECLARATION OF CONFORMITY (EUROPE)Linksys Group declares that the Instant Wireless Series products included in the InstantWireless Series conform to the specifications listed below, following the provisions of theEMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC:• ETS 300-826, 301 489-1 General EMC requirements for Radio equipment.• EN 609 50 Safety• ETS 300-328-2 Technical requirements for Radio equipment.Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor usemay be restricted to certain frequencies and/or may require a license for operation. Formore details, contact Linksys Corporate Compliance.Note: Combinations of power levels and antennas resulting in a radiated power level ofabove 100 mW are considered as not compliant with the above mentioned directive andare not allowed for use within the European community and countries that have adoptedthe European R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03.For more details on legal combinations of power levels and antennas, contact LinksysCorporate Compliance.• Linksys Group vakuuttaa täten että Instant Wireless Wireless-G Ethernet Bridge tyyp-pinen laite on direktiivin 1999/5/EY, direktiivin 89/336/EEC ja direktiivin 73/23/EEColeellisten vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojenmukainen.• Linksys Group déclare que le pont Ethernet sans fil G est conforme aux conditionsessentielles et aux dispositions relatives à la directive 1999/5/EC, la directive89/336/EEC, et à la directive 73/23/EEC.• Belgique B L’utilisation en extérieur est autorisé sur le canal 11 (2462 MHz), 12 (2467MHz), et 13 (2472 MHz).Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-dessus d’unespace public, aucun enregistrement n’est nécessaire pour une distance de moinsde 300m. Pour une distance supérieure à 300m un enregistrement auprès de l’IBPTest requise. Pour une utilisation publique à l’extérieur de bâtiments, une licence del’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT.
Download:
Mirror Download [FCC.gov]
Document ID372133
Application ID5GxhBhCQlW2+zAfcPHpcpA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.53kB (369135 bits)
Date Submitted2003-11-10 00:00:00
Date Available2003-11-10 00:00:00
Creation Date2003-11-06 09:26:22
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-11-06 09:26:22
Document TitleUser manual
FCC ID Filing: Q87-WET54GV2

Navigation menu