LINKSYS WUSB6100M Max-Stream AC600 Wi-Fi Micro USB Adapter User Manual

LINKSYS LLC Max-Stream AC600 Wi-Fi Micro USB Adapter

UserManual.wiki >

LINKSYS >

WUSB6100M User Manual >

User manual HTML Version

User manual

User Guide

Next-Gen AC

Max-Stream AC600

Wi-Fi Micro USB Adapter

WUSB6100M

Contents

Product Overview ................................................................................................... 3

Installation ................................................................................................................. 4

Connect with Network Manager ........................................................................................................ 4

Troubleshooting ...................................................................................................... 5

Your computer does not recognize the adapter. .......................................................................... 5

Your adapter’s LED is orange. ............................................................................................................. 5

Your computer cannot communicate with other computers on your Wi-Fi network. ...... 5

Specifications .......................................................................................................... 6

Linksys WUSB6100M ........................................................................................................................... 6

Environmental ........................................................................................................................................... 6

Product Overview

The USB6100M adapter upgrades Wi-Fi connectivity on your Windows-based desktop or

laptop computer. To help protect your data and privacy, you can configure your home network

and this adapter to use Wi-Fi Protected Access 2 (WPA2) encryption.

USB plug—Connect this end to any available USB port on your computer.

LED—Blinks during WPS and is solid when connected to a Wi-Fi network.

LED Behavior

Dim White Not connected to a Wi-Fi network

Solid Orange Disabled

Solid White Connected to a Wi-Fi network

Blinking White WPS in process

Installation

1. Insert the USB adapter into an open USB port on your computer.

2. Watch your monitor/screen as the device automatically installs.

3. Connect to your Wi-Fi network using your computer’s network manager.

Note—If the adapter did not install automatically, use the provided CD or download and run

the driver installation file available at linksys.com/support/wusb6100m.

Connect with Network Manager

Choose your operating system.

• Windows 10

• Windows 8.1

• Windows 7

Windows 10

1. Click the Wi-Fi network icon . The Network menu opens from the right side of the

screen, showing you available Wi-Fi networks and your current connection status.

2. Choose a network. If prompted, enter any additional required network information

(such as password).

Windows 8.1

1. Click Settings in the lower-right corner of the screen.

2. Click the Wi-Fi network icon . The Network menu opens from the right side of the

screen, showing you available Wi-Fi networks and your current connection status.

3. Choose a network. If prompted, enter any additional required network information

(such as password).

Windows 7

1. Click the Wireless Network Configuration utility icon in the lower-right corner of the

screen. A list of available Wi-Fi networks will appear.

2. Choose a network and click Connect.

3. If prompted to enter a network security key, type your password (security key) into the

network security key field. Click OK.

Troubleshooting

Your computer does not recognize the adapter.

• Make sure that the adapter is properly inserted into your computer’s USB port.

• Connect the adapter into a different USB port.

Your adapter’s LED is orange.

• Your adapter has been disabled.

• Go to your computer’s network settings page and make sure the adapter was installed.

• Enable the adapter.

Your computer cannot communicate with other computers

on your Wi-Fi network.

• Make sure that the computers are powered on.

• Make sure that the adapter is configured with the same Wi-Fi network name and wireless

security settings as the other computers on your Wi-Fi network.

Specifications

Linksys WUSB6100M

Model Name Next-Gen AC Max-Stream AC600 Wi-Fi Micro

USB Adapter

Model Number WUSB6100M

Standards 802.11a, 802.11b, 802.11g, 802.11n,

802.11ac

Interface USB 2.0

LED Connection Status

Antennas 1 internal dual-band

Security Features WEP, WPA and WPA2, Personal, WPA and

WPA RADIUS

Security Key Bits Up to 128-bit encryption

OS requirements Windows 7, Windows 7 64-bit, Windows 8.1,

Windows 8.1 64-bit, Windows 10 64-bit,

Windows 10 32-bit

Environmental

Dimensions 40.6mm x 12mm x 18mm

Unit Weight

6.15g

Certifications FCC, IC, CE, Wi-Fi (IEEE a/b/g/n/ac),

Windows 7, Windows 8.1, Windows 10

Operating Temp.

32°F to 104°F (0°C to 40°C)

Storage Temp.

-4°F to 140°F (-20°C to 60°C)

Operating Humidity 10% to 80% relative humidity, non-

condensing

Storage Humidity

5% to 90% non-condensing

Specifications are subject to change without notice.

Notes:

For regulatory, warranty, and safety information, see the CD that came with your USB adapter or

go to Linksys.com/support/wusb6100m.

Specifications are subject to change without notice.

Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance

can vary, including lower Wi-Fi network capacity, data throughput rate, range and coverage.

Performance depends on many factors, conditions and variables, including distance from the

access point, volume of network traffic, building materials and construction, operating system

used, mix of wireless products used, interference and other adverse conditions.

BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of

companies. Third-party trademarks mentioned are the property of their respective owners.

Licenses and notices for third party software used in this product may be viewed here:

http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-

us/gplcodecenter for questions or GPL source code requests.

LNKPG-00305 Rev. A00

FCC

Federal Communications Commission (FCC) Statement

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

15.21

You are cautioned that changes or modifications not expressly approved by the part responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) this device may not cause harmful interference and

2) this device must accept any interference received, including interference that may cause undesired

operation of the device.

For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when

used with an accessory that contains no metal and that positions the handset a minimum of 5mm

from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines

Canada,IndustryCanada(IC)

ThisClassBdigitalapparatuscomplieswithCanadianICES‐003andRSS‐247.

ThisdevicecomplieswithIndustryCanadalicence‐exemptRSSstandard(s).

Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcause

interference,and(2)Thisdevicemustacceptanyinterference,includinginterferencethat

maycauseundesiredoperationofthedevice.



ICRFRadiationExposureStatement:

Forbodywornoperation,thisdevicehasbeentestedandmeetsRF

exposureguidelineswhenusedwithanaccessorythatcontainsnometal

andthatpositionsthedeviceaminimumof5mmfromthebody.Useof

otheraccessoriesmaynotensurecompliancewithRFexposureguidelines.



Operationintheband5150~5250MHzisonlyforindooruse.



CetappareilnumériquedeclasseBestconformeàlanormeNMB‐003etRSS‐247



LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradio

exemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:

(1)l'appareilnedoitpasproduiredebrouillage,et

(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesile

brouillageestsusceptibled'encompromettrelefonctionnement.



Déclarationdel'expositionauxradiationsRF:

Pourlefonctionnementducorps,cetéléphoneaététestéetrépondauxdirectives

d'expositionRFlorsqu'ilestutiliséavecunaccessoirequinecontientpasdemétaletqui

placelecombinéd'unminimumde5mmducorps.Utilisationd'autresaccessoirespeutne

pasassurerlerespectdesdirectivesd'expositionRF.



Opérationdanslabande5150‐5250MHzestuniquementpouruneutilisationenintérieur

LINKSYS WUSB6100M Max-Stream AC600 Wi-Fi Micro USB Adapter User Manual

LINKSYS LLC Max-Stream AC600 Wi-Fi Micro USB Adapter

Contents

User manual

Navigation menu

Namespaces

Views

Navigation