LINKSYS X2000V2 Wireless ADSL2+ Modem Router User Manual Wireless ADSL2 Modem Router User Guide

LINKSYS LLC Wireless ADSL2+ Modem Router Wireless ADSL2 Modem Router User Guide

User Manual

USER GUIDEWireless ADSL2+ Modem RouterModel: X2000                                                          Wireless ADSL2+ Modem Router                                             Wireless-N Router with ADSL2+ Modem   Model:X2000 v2
 About This GuideiWireless ADSL2+ Modem RouterAbout This GuideIcon DescriptionsWhile  reading  through  the  User  Guide  you  may  see various icons that call attention to specific items. Below is a description of these icons:NOTE: This  check  mark  indicates  that  there  is a  note  of  interest  and  is  something  that  you should pay special attention to while using the product. WARNING:  This  exclamation  point  indicates that there is a caution or warning of potential risk of bodily injury and/or it is something that could damage your property or product.WEB:  This  globe  icon  indicates  a  noteworthy website address or e-mail address.Online ResourcesWebsite  addresses  in  this  document  are  listed  without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address.Resource WebsiteLinksys www.linksysbycisco.comLinksys International  www.linksysbycisco.com/internationalGlossary www.linksysbycisco.com/glossaryNetwork Security www.linksysbycisco.com/securityWeb Technical Supportwww.linksysbycisco.com/supportCopyright and TrademarksLinksys,  Cisco  and  the  Cisco  Logo are  registered  trademarks  or trademarks  of  Cisco  Systems,  Inc.  and/or its affiliates in the U.S. and certain other countries. Other brands and product names  are  trademarks  or  registered trademarks  of  their  respective  holders. Copyright  ©  2009  Cisco  Systems,  Inc.  All rights reserved.
 Table of ContentsiiWireless ADSL2+ Modem RouterChapter 1:  Product Overview  1Front Panel.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1Back Panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1Placement Positions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2Chapter 2:  Wireless Security Checklist  3General Network Security Guidelines .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3Additional Security Tips   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3Chapter 3:  Advanced Configuration  4How to Access the Utility.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   4Using the Utility   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  4List of Screens in the Utility  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  4Setup Tab   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5Wireless Tab .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5Security Tab .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5Access Restrictions Tab .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  6Applications & Gaming Tab  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  6Administration Tab.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  6Status Tab  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  7Appendix B:  Specifications  8X2000 .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8Appendix A:  Troubleshooting  10Appendix C:  Regulatory Information  11European Union  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .11Australia  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18New Zealand  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18United States of America.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18Canada .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .20X2000 v2
Chapter 1 Product Overview1Wireless ADSL2+ Modem RouterChapter 1:  Product OverviewThank  you  for  choosing  the  Wireless  ADSL2+  Modem Router.  This  device  lets  you  access  the  Internet  via  a wireless connection or  through one of its  four switched ports.  You  can  also  use  it  to  share  resources  such  as computers, printers and files. A variety of security features, such as WPA2™ security, a Stateful Packet Inspection (SPI) firewall  and  NAT  technology,  help  to  protect  your  data and your privacy while online. Configuration is easy using the provided browser-based utility.Front PanelPower  The Power LED is continuously lit green while  the  device  is  powered  on. The  LED  is  lit amber  if  a  POST  (Power  On  Self Test)  failure  or device malfunction occurs.Ethernet  1-3  (Green)  These  numbered  LEDs, one  for  each  of  the  numbered  ports  on  the Modem Router’s back panel, serve two purposes. If the LED is continuously lit, the Modem Router is successfully connected to a device through that port. It flashes to indicate network activity over that port.NOTE:  The  Ethernet  1  LED  is  lit  amber when the WAN link is established on that port.Wi-Fi  Protected  Setup™  Button  Press  this button to have Wi-Fi Protected Setup™ search for your Wi-Fi Protected Setup™-supported wireless device. The LED is continuously lit green when a Wi-Fi Protected Setup™ connection is successfully established.  The  LED  blinks  slowly  while  Wi-Fi Protected Setup™ is setting up a connection, and is lit amber if an error occurs. The LED is off when Wi-Fi Protected Setup™ is idle.NOTE: Wi-Fi Protected Setup™ is a feature that  makes  it  easy  to  configure  your wireless network and its security settings.Wireless  (Green)  The  Wireless  LED  lights  up when  the  wireless  feature  is  enabled.  It  flashes when the  Modem  Router  is  actively  sending  or receiving data over the network.DSL  (Green)  The  DSL  LED  lights  up  whenever there  is  a  successful  DSL  connection.  The  LED flashes  green  while  the  Modem  Router  is establishing the ADSL connection.Internet  (Green/Red)  The Internet LED lights up green and stays on when a connection is made through the  Internet port.  It  flashes  to indicate network activity over the Internet port. The LED is lit red when an authentication error occurs.Back PanelDSL  The DSL port connects to the ADSL line. Ethernet  3,  2,  1  The  Ethernet  ports  (3,  2,  1) connect the Modem Router to wired computers and other Ethernet network devices. NOTE:  The  Ethernet  1  port  can also  be  configured  as  the  WAN port.  To  do  this,    access  the  Web-based  utility  (refer  to  “Chapter  3: Advanced Configuration” on page 4), then select the Setup > Ethernet tab.Reset  There are two ways to reset the Modem Router’s  factory  defaults.  Either  press  and hold  the  Reset  button  for  approximately  five seconds,  or  restore  the  defaults  from  the Administration > Factory  Defaults  screen  of  the Modem Router’s web-based utility.Power  The Power port is where you will connect the power adapter.On/Off Button  Press the On/Off button to turn power to the device on or off.
Chapter 1 Product Overview2Wireless ADSL2+ Modem RouterFollow these instructions:1.  Determine where you want to mount the device. Make sure  that  the  wall  you  use  is  smooth,  flat,  dry,  and sturdy. Also make sure the location is within reach of an electrical outlet. 2.  Drill two holes into the wall. Make sure the holes are  152 mm (6 inches) apart.3.  Insert  a  screw  into  each  hole  and  leave  3  mm  (0,12 inches) of its head exposed.4.  Maneuver the device so the wall-mount slots line up with the two screws.5.  Place the  wall-mount slots over the screws and slide the  device  down  until  the  screws  fit  snugly  into  the wall-mount slots.Placement PositionsThere  are  two  ways  to  physically  install  the  device. The first way is to place the device horizontally on a surface. The second way is to mount the device on a wall.The best  place  for the  device  is  usually  at  the  center of your wireless network, within range of all of your wireless devices.Horizontal PlacementThe device has four rubber feet on its bottom panel. Place the device on a level surface near an electrical outlet.Wall-Mounting Placement The  device  has  two  wall-mount  slots  on  its  bottom panel.  The  distance  between  the  slots  is  152  mm  (6 inches). Two screws are needed to mount the device.Suggested Mounting Hardware2,5-3,0 mm4-5 mm 1-1,5 mm †Note: Mounting hardware illustrations are not true to scale.NOTE:  Cisco  is  not  responsible  for  damages incurred by insecure wall-mounting hardware.152 mmWall Mounting Template
Chapter 2 Wireless Security Checklist3Wireless ADSL2+ Modem RouterChapter 2:  Wireless Security ChecklistWireless networks are convenient and  easy to  install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending  information  over  radio  waves,  it  can  be  more vulnerable to intruders than a traditional wired network. Like signals from your cellular or cordless phones, signals from your wireless network can also be intercepted. Since you cannot physically prevent someone from connecting to your wireless network, you need to take some additional steps to keep your network secure. 1.  Change the default wireless    network name or SSIDWireless  devices  have  a  default  wireless  network  name or Service  Set  Identifier  (SSID) set  by the  factory. This  is the name of your wireless network, and can be up to 32 characters  in  length.  Linksys  by  Cisco  wireless  products use  linksys  as  the  default  wireless  network  name.  You should change the wireless network name to something unique  to  distinguish  your  wireless  network  from  other wireless networks that may exist around you, but do not use  personal  information  (such  as  your  Social  Security number)  because  this  information  may  be  available  for anyone to see when browsing for wireless networks. 2.  Change the default passwordFor wireless products such as access points, routers, and modem routers, you will be asked  for a password when you want to change their settings. These devices have a default password set by the factory. The default password is  admin.  Hackers  know  these  defaults  and  may  try  to use them to access your wireless device and change your network  settings.  To  thwart  any  unauthorized  changes, customize  the  device’s  password  so  it  will  be  hard  to guess.3.  Enable MAC address filteringLinksys  by  Cisco  routers  and  modem  routers  give  you the ability to enable Media Access Control (MAC) address filtering. The MAC address is a unique series of numbers and  letters  assigned  to  every  networking  device.  With MAC  address  filtering  enabled,  wireless  network  access is provided solely for wireless devices with specific MAC addresses. For example, you can specify the MAC address of  each  computer  in  your  home  so  that  only  those computers can access your wireless network. 4.  Enable encryptionEncryption  protects  data  transmitted  over  a  wireless network.  Wi-Fi  Protected  Access™  (WPA™/WPA2™)  and Wired Equivalency Privacy (WEP) offer different levels of security for wireless communication.A  network  encrypted  with  WPA™/WPA2™  is  more secure  than  a  network  encrypted  with  WEP,  because  WPA™/WPA2™  uses  dynamic  key  encryption.  To  protect the information as it passes over the airwaves, you should enable the highest level of encryption supported by your network equipment. WEP  is  an  older  encryption  standard  and  may  be  the only option available on some older devices that do not support WPA™.General Network Security GuidelinesWireless  network  security  is  useless  if  the  underlying network is not secure.  • Password protect  all  computers  on  the  network  and individually password protect sensitive files. • Change passwords on a regular basis. • Install  anti-virus  software  and  personal  firewall software. • Disable file sharing (peer-to-peer). Some applications may  open  file  sharing  without  your  consent  and/or knowledge.Additional Security Tips • Keep wireless routers, access points, or modem routers away from exterior walls and windows. • Turn wireless routers, access points, or modem routers off  when  they  are  not  being  used  (at  night,  during vacations). • Use strong passphrases that are at least eight characters in length. Combine letters and numbers to avoid using standard words that can be found in the dictionary. WEB: For more information on wireless security, visit www.linksysbycisco.com/security
Chapter 3 Advanced Configuration4Wireless ADSL2+ Modem RouterChapter 3: Advanced ConfigurationAfter you finish  running  the Setup Wizard on  the  Setup CD-ROM, the device is ready for use. To change the device’s advanced settings, access the Configuration Utility  via a web browser on a computer connected to the device.NOTE FOR USERS IN NEW ZEALAND: Refer to the  Note  in    Setup  > Basic  Setup,  page  5  for setup instructions specific to your country.How to Access the UtilityLaunch the web browser on your computer, and enter the device’s  default  IP  address,  192.168.1.1,  in  the  Address field. Then, press Enter.A  login  screen appears.  Use  the  default  user  name  and password,  admin,  unless  you  changed  them  when  you ran the Setup Wizard. (You can set a new user name and password  from  the  Administration  tab’s  Management screen.) Click OK to continue.LoginIf you are unable to log in, press the Reset button on the back panel for at least 5 seconds, then wait for the device to reset and try again.Using the UtilityImmediately  after  login,  the  Basic Setup  screen  appears. Near the top of the  screen is  a bar with selectable tabs. Use these tabs to navigate within the Utility. The primary tabs indicate the Utility’s main configuration categories. Each primary tab has one or more secondary tabs that provide access to the primary tab’s configuration screens.Setup Wireless Storage Security Access RestrictionsApplications & Gaming Administration Status   Basic Setup     Ethernet     DDNS     MAC Address Clone     Advanced RoutingNavigation TabsTo  access  a  screen,  click  the  appropriate  primary  tab, then click the appropriate secondary tab. The screen will appear, with its primary and secondary tabs highlighted.List of Screens in the UtilityThe screens are organized hierarchically as listed  below. (Some screens may not apply to all models.)Setup TabSetup > Basic SetupSetup > EthernetSetup > DDNSSetup > MAC Address CloneSetup > Advanced RoutingWireless TabWireless > Basic Wireless SettingsWireless > Wireless SecurityWireless > Wireless MAC FilterWireless > Advanced Wireless SettingsStorage Tab (WAG320N Only)Storage > Disk ManagementStorage > Shared FolderStorage > AdministrationStorage > Media ServerSecurity TabSecurity > FirewallSecurity > VPN PassthroughAccess Restrictions TabAccess Restrictions > Internet Access PolicyApplications & Gaming TabApplications & Gaming > Single Port ForwardingApplications & Gaming > Port Range ForwardingApplications & Gaming > Port Range TriggeringApplications & Gaming > DMZApplications & Gaming > QoSAdministration TabAdministration > ManagementAdministration > ReportingAdministration > DiagnosticsAdministration > Back Up & RestoreAdministration > Factory DefaultsAdministration > Firmware UpgradeAdministration > LanguageStatus TabStatus > Modem RouterStatus > Local NetworkStatus > Wireless NetworkStatus > DSL ConnectionPrimary TabsSecondary Tabs
Chapter 3 Advanced Configuration5Wireless ADSL2+ Modem RouterSetup TabThe Setup tab provides the device’s basic setup functions. For  detailed  information  on  the  Setup  tab,  refer  to  the Utility’s online help pages.Setup > Basic SetupThe Basic Setup screen allows you to change the device’s general  settings.  The  following  connection  types (encapsulations) are available:  • RFC 2364 PPPoA • RFC 2516 PPPoE • RFC 2684 Routed • IPoA • RFC 2684 Bridged - Dynamic IP Address • RFC 2684 Bridged - Static IP Address • Bridge Mode OnlyNOTE FOR USERS IN NEW ZEALAND: To set up the device, follow these  instructions:1.  Access the Setup > Basic Setup screen.2.  Select  RFC  2364  PPPoA  from  the Encapsulation drop-down menu.3.  For the Virtual Circuit ID, enter 0 for the VPI and 100 for the VCI.4.  Select VC for Multiplexing.5.  Select Multimode from the DSL Modulation drop-down menu.6.  Enter your User Name and Password details from your ISP.7.  Click Save Settings.Setup > EthernetThe Ethernet screen allows you to configure the device’s Ethernet  settings.  It  also  allows  you  to  set  up  the  first Ethernet port as a WAN port.Setup > DDNSThe  DDNS  screen  allows  you  to assign  a fixed  host  and domain  name  to  a  network  computer  that  has  been assigned  a  dynamic  Internet  IP  address.  This  is  useful when  you  are  hosting  your own  website,  FTP  server,  or other server behind the device.Setup > MAC Address CloneSome  service  providers  require  you  to  register  a  MAC address in order to access the Internet. The MAC Address Clone screen lets you use the MAC address of a device that has already been registered with your service provider, by copying that MAC address to the device.Setup > Advanced RoutingThe Advanced Routing screen allows you to configure the device’s  advanced  routing  functions,  such  as  operating mode, dynamic mode, and static routing.Wireless TabThe  Wireless  tab  allows  you  to  configure  the  device’s wireless functions. For detailed information on the Wireless tab, refer to the Utility’s online help pages.Wireless > Basic Wireless SettingsThe Basic Wireless Settings screen allows you to set up a network  with Wi-Fi Protected  Setup™,  change  the  radio band,  select  the  network  mode,  change  the  wireless network  name  (SSID),  change  the  wireless  channel  and disable the SSID broadcast.Note  to  US  model  owner:  To  comply  with  US  FCC regulation,  the  country  selection  function  has  been completely  removed  from  all  US  models.  The  above function is for non-US models only.Wireless > Wireless SecurityThe Wireless  Security  screen allows  you  to configure  the security of your wireless network(s). It allows you to select from a number of security modes, such as WPA2.Wireless > Wireless MAC FilterThe Wireless MAC Filter screen allows you to control (block or  allow)  Internet  access  by  individual  devices  on  your wireless network by specifying their MAC addresses.Wireless > Advanced Wireless SettingsThe  Advanced  Wireless  Settings  screen  allows  you  to configure the device’s advanced wireless functions.Security TabThe  Security  tab  allows  you  to  enhance  the  security  of your network. For detailed information on the Security tab, refer to the Utility’s online help pages.Security > FirewallThe Firewall screen allows you to configure a firewall that can  filter  out  various  types  of  unwanted  traffic  on  the device’s local network.
Chapter 3 Advanced Configuration6Wireless ADSL2+ Modem RouterSecurity > VPN PassthroughThe VPN Passthrough screen allows you to configure the device’s  VPN  passthrough  feature.  This  feature  lets  VPN tunnels using the IPSec, L2TP, or PPTP protocols to pass through the device’s firewall.Access Restrictions TabThe  Access  Restrictions  tab  allows  you  to  configure the  Internet  access  restrictions  for  each  device  in  your network. For  detailed  information on  the  Access  Restrictions  tab, refer to the Utility’s online help pages.Access Restrictions > Internet Access PolicyThe  Internet  Access  Policy  screen  allows  you  to  define policies  that  are  used  to  block  or  allow  specific  kinds of  Internet  usage  and  traffic,  such  as  Internet  access, designated  applications,  websites,  and  inbound  traffic during specific days and times, and for a specified list of devices in your network.Applications & Gaming TabThe Applications  &  Gaming  tab  allows you  to configure functions such as port forwarding and quality of service that  may  be  necessary  for  special  applications  such  as hosting web servers, ftp servers, and e-mail servers on on your  network,  or  other  specialized  internet  applications such as videoconferencing or online gaming. For  detailed  information  on  the  Applications  &  Gaming tab, refer to the Utility’s online help pages.Applications & Gaming > Single Port ForwardingThe  Single  Port  Forwarding  screen  allows  you  to  set  up port forwarding for a single port. You should assign static IP addresses to the destination computers before you use this feature.Applications & Gaming > Port Range ForwardingThe  Port  Range  Forwarding  screen  allows  you  to  set  up port  forwarding for  a  range  of  ports. You  should  assign static  IP  addresses  to  the  destination  computers  before you use this feature.Applications & Gaming > Port Range TriggeringThe Port Range Triggering screen allows you to set up port triggering. When port triggering is configured, the device watches  for  specified  port  numbers  in  outgoing  data. When a  match is found, the  device records the sending computer’s  IP  address  so  that when  the  requested  data returns, it can be sent to the proper computer.Applications & Gaming > DMZThe DMZ screen allows you to expose one network user to the Internet for use of a special-purpose service such as Internet  gaming or video  conferencing. DMZ hosting forwards all the ports at the same time to one computer. You  should  assign static  IP  addresses to  the  destination computers before you use this feature.Applications & Gaming > QoSThe QoS screen allows you to specify priorities for different types of traffic. Lower priority traffic will be slowed down to allow greater throughput or less delay for high priority traffic.Administration TabThe Administration tab allows you to configure the device’s administrative functions. For detailed information on the Administration tab, refer to the Utility’s online help pages.Administration > ManagementThe  Management  screen  allows  you  to  manage  specific functions for access and security.NOTE  ON  CISCO  WEB  ASSISTANT  OPTION (not on all models): If you see an “error code 404”  message  (indicating  that  you  entered  an invalid  web  address),  the  Cisco Web  Assistant will  appear  and  automatically  run  a  search based on the keywords in the web address. This feature  can  be  enabled  or  disabled  from  this screen.NOTE ON TREND MICRO OPTION (not on all models):  Trend  Micro  ProtectLink  Gateway is  a  hosted  security  service  that  stops  spam and filters URLS to prevent unwanted content from  passing  through  your  router.  The  Email Protection  is  the  hosted  messaging  security solution  provided  by  Trend  Micro  InterScan Messaging Hosted Security (IMHS). This feature can be enabled or disabled from this screen.Administration > ReportingThe Reporting screen allows you to configure system event logging and to configure sending of e-mail alerts when a Denial of Service attack is detected.
Chapter 3 Advanced Configuration7Wireless ADSL2+ Modem RouterAdministration > DiagnosticsThe Diagnostics screen allows you to perform a ping test to check the status of your Internet connection.Administration > Back Up & RestoreThe Back Up & Restore screen allows you to back up and restore the configuration settings of your device.Administration > Factory DefaultsThe  Factory  Defaults  screen  allows  you  to  restore  the factory defaults of the device. All savings you have saved will be lostNOTE: Restoring the factory defaults causes all settings you have previously saved to be lost. Administration > Firmware UpgradeThe Firmware Upgrade screen allows you to upgrade the device’s firmware.Administration > LanguageThe  Language  screen  allows  you  to  select  an  available language for the utility.Status TabThe Status tab allows you to display status information.For  detailed  information  on  the  Status  tab,  refer  to  the Utility’s online help pages.Status > Modem RouterThe Modem Router screen displays information about the device and its current settings. The on-screen information will vary depending on the Internet Connection Type you use.Status > Local NetworkThe Local Network screen displays the status of your Local Area Network. Status > Wireless NetworkThe  Wireless  Network  screen  displays  some  basic information about the wireless network of the device.Status > DSL ConnectionThe DSL Connection screen displays the status of your DSL connection.
Appendix B Specifications8Wireless ADSL2+ Modem RouterAppendix B:  SpecificationsX2000Standards  WLAN: 802.11n draft 2.0, 802.11g,    802.11b  Ethernet: 802.3, 802.3u  ADSL: T1.413i2, G.992.1 (G.DMT),    G.992.2 (G.Lite), G.992.3 (ADSL2),    G.992.5 (ADSL2+) for Annex A, B, M, L,    U-R2 for Annex BPorts  DSL, Ethernet (1-4), PowerButtons  On/Off, Reset, Wi-Fi Protected Setup™LEDs  Power, Ethernet (1-4), Security,    Wireless, DSL, InternetCabling Type  CAT5, RJ-11 (for Annex A),    RJ-45 (for Annex B)Antennas  2 InternalModulations  802.11b: CCK/QPSK, BPSK  802.11g: OFDM/BPSK, QPSK, 16-QAM,    64-QAM  802.11n: OFDM/BPSK, QPSK, 16-QAM,    64-QAMTransmit Power  802.11b: 17.0  ±1.0 dBm  802.11g: 15.0± 1.0 dBm   802.11n: 13.0 ± 1.5 dBmReceive Sensitivity  -80 dBm (typical) @ 11 Mbps   -70 dBm (typical) @ 54 Mbps   -61 dBm (typical) @ 130 Mbps   -61 dBm (typical) @ 270 MbpsAntenna Gain  1.45 & 3.04 dBiSecurity Features WPA2™/WPA™ Personal and Enterprise;  128, 64 bits WEP;   MAC Address Filtering;   SPI FirewallOS Requirements  Windows XP, Vista, or Vista 64-bit     (to run the     edition with latest updates (for     Setup CD)     Network Magic and Setup Wizard);   Mac OS X 10.4 or higher (for Setup       Wizard)EnvironmentalDimensions  202 x 34 x 160 mm  (8,0” x 1,3” x 6,3”)Weight  362 g (12,8 oz)Power  12VDC, 1ACertification  FCC, CE, Telepermit, K.21, UL, CB,    Wi-Fi (802.11b/g), WPA™, WPA2™,   WMM, Wi-Fi Protected Setup™Operating Temp.  0 to 40°C (32 to 104°F)Storage Temp.  -20 to 70°C (-4 to 158°F)Operating Humidity  10 to 85% NoncondensingStorage Humidity  5 to 90% NoncondensingX2000 v2
Appendix B Specifications9Wireless ADSL2+ Modem Router
Appendix A Troubleshooting10Wireless ADSL2+ Modem RouterAppendix A:  TroubleshootingYour computer cannot connect to the Internet. Follow the instructions until your computer can connect to the Internet: • Make sure that the Modem Router is powered on. The Power LED should be green and not flashing. • If  the  Power  LED  is  flashing,  then  power  off  all  of your network devices, including  the Modem Router and  computers. Then  power  on  each  device  in  the following order:1.  Modem Router2.  Computer • Check the LEDs on the device’s front panel. Make sure the  Power,  DSL,  and  at  least  one  of  the  numbered Ethernet  LEDs  are  lit.  If  they  are  not,  then  check the  cable  connections.  The  computer  should  be connected  to  one  of  the  Ethernet  ports  numbered 1-4 on the device, and the device’s DSL port must be connected to the ADSL line.When  you  double-click  the  web  browser,  you  are prompted for a user name and password. If you want to get rid of the prompt, follow these instructions.Launch the web browser and perform the following steps (these steps are specific to Internet Explorer but are similar for other browsers):3.  Select Tools > Internet Options. 4.  Click the Connections tab.5.  Select Never dial a connection. 6.  Click OK.You are using a static IP address and cannot connect.Refer to Windows Help and  change your Internet Protocol (TCP/IP) Properties to Obtain an IP address automatically. The computer cannot connect wirelessly to the network.Make sure the wireless network name or SSID is the same on both the computer and the device. If you have enabled wireless  security,  then  make  sure  the  same  security method and key are used by both the computer and the device.You  need  to  modify  the  basic  settings  on  the deviceRouter.Run the Setup Wizard on the Setup CD-ROM.You  need  to  modify  the  advanced  settings  on  the device.Open the web browser (for example, Internet Explorer or Firefox), and enter the device’s IP address in the address field  (the  default  IP  address  is  192.168.1.1).  When prompted,  complete  the  User name  and  Password  fields (the default user name and password is admin). Click the appropriate tab to change the settingsWEB:  If  your  questions  are  not addressed  here,  refer  to  the  website,  www.linksysbycisco.com/support
Appendix C Regulatory Information11Wireless ADSL2+ Modem RouterAppendix C:  Regulatory InformationEuropean UnionThe following information applies if you use the product within the European Union.Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance Information for 2,4-GHz and 5-GHz Wireless Products  Relevant  to  the  EU  and  Other  Countries Following the EU Directive 1999/5/EC (R&TTE Directive)NOTE: The 5 GHz information does not apply to Wireless-G (802.11g) only products.Бъ л г а р с к и [Bulgarian]Това оборудване отговаря на съществените изисквания  и  приложими  клаузи  на Директива 1999/5/ЕС.Česky [Czech]:Toto  zařízení  je  v  souladu  se  základními požadavky  a  ostatními  odpovídajícími ustanoveními Směrnice 1999/5/EC.Dansk [Danish]:Dette  udstyr  er  i  overensstemmelse  med de  væsentlige  krav  og  andre  relevante bestemmelser i Direktiv 1999/5/EF.Deutsch [German]:Dieses  Gerät  entspricht  den  grundlegenden Anforderungen  und  den  weiteren entsprechenden  Vorgaben  der  Richtlinie 1999/5/EU. Eesti [Estonian]:See  seade  vastab  direktiivi  1999/5/EÜ olulistele  nõuetele  ja  teistele  asjakohastele sätetele.English:This  equipment  is  in  compliance  with  the essential  requirements  and  other  relevant provisions of Directive 1999/5/EC.Español [Spanish]:Este  equipo  cumple  con  los  requisitos esenciales  asi  como  con  otras  disposiciones de la Directiva 1999/5/CE.Ελληνική [Greek]:Αυτός ο εξοπλισµός είναι σε συµµόρφωση µε τις  ουσιώδεις  απαιτήσεις  και  άλλες  σχετικές διατάξεις της Οδηγίας 1999/5/EC.Français [French]:Cet  appareil  est  conforme  aux  exigences essentielles  et  aux  autres  dispositions pertinentes de la Directive 1999/5/EC.Íslenska [Icelandic]:Þetta  tæki  er  samkvæmt  grunnkröfum  og öðrum  viðeigandi  ákvæðum  Tilskipunar 1999/5/EC.Italiano [Italian]:Questo  apparato  é  conforme  ai  requisiti essenziali  ed  agli  altri  principi  sanciti  dalla Direttiva 1999/5/CE.Latviski [Latvian]:Šī  iekārta  atbilst  Direktīvas  1999/5/EK  būtiskajām  prasībām  un  citiem  ar  to saistītajiem noteikumiem.Lietuvių [Lithuanian]:Šis  įrenginys  tenkina  1999/5/EB  Direktyvos esminius  reikalavimus ir  kitas  šios  direktyvos nuostatas.Nederlands[Dutch]:Dit apparaat voldoet  aan  de  essentiele  eisen en  andere  van  toepassing  zijnde  bepalingen van de Richtlijn 1999/5/EC.Malti [Maltese]:Dan  l-apparat  huwa  konformi  mal-ħtiġiet essenzjali  u  l-provedimenti  l-oħra  rilevanti tad-Direttiva 1999/5/EC.Magyar[Hungarian]:Ez  a  készülék  teljesíti  az  alapvető követelményeket  és  más  1999/5/EK irányelvben  meghatározott  vonatkozó rendelkezéseket.Norsk[Norwegian]:Dette  utstyret  er  i  samsvar  med  de grunnleggende  krav  og  andre  relevante bestemmelser i EU-direktiv 1999/5/EF.Polski [Polish]:Urządzenie  jest  zgodne  z  ogólnymi wymaganiami  oraz  szczególnymi warunkami określonymi Dyrektywą UE: 1999/5/EC.Português [Portuguese]:Este equipamento está em conformidade com os  requisitos  essenciais  e  outras  provisões relevantes da Directiva 1999/5/EC.Română [Romanian]Acest  echipament  este  in  conformitate cu  cerintele  esentiale  si  cu  alte  prevederi relevante ale Directivei 1999/5/EC.Slovensko [Slovenian]:Ta naprava je skladna z bistvenimi zahtevami in  ostalimi  relevantnimi  pogoji  Direktive 1999/5/EC.Slovensky [Slovak]:Toto  zariadenie  je  v  zhode  so  základnými požiadavkami  a  inými  príslušnými nariadeniami direktív: 1999/5/EC. Suomi [Finnish]:Tämä  laite  täyttää  direktiivin  1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden  laitetta  koskevien  määräysten mukainen.Svenska [Swedish]:Denna utrustning är i överensstämmelse med de  väsentliga  kraven  och  andra  relevanta bestämmelser i Direktiv 1999/5/EC.
Appendix C Regulatory Information12Wireless ADSL2+ Modem RouterFor all products, the Declaration of Conformity (DofC) is available through one or more of these options:  • A pdf file is included on the product’s CD. • A print copy is included with the product. • A  pdf  file  is  available  on  the  product’s  webpage.  Visit  www.linksysbycisco.com/international  and select your country or region. Then select your product.If you need any other  technical documentation, see the “Technical  Documents  on  www.linksysbycisco.com/international” section, as shown later in this appendix.Non-Wireless Equipment (ADSL Modems/Gateways)The  following  standards  were  applied  during  the assessment  of  the  product  against  the  requirements  of the Directive 1999/5/EC: • EMC: EN 55 022 and EN 55 024 • Safety: EN 60950-1CE MarkingFor  the  Linksys  products  such  as  the  ADSL  modems/gateways,  the  following  CE  mark  is  added  to  the equipment.Wireless Equipment (Wireless-N/G/A/B Products)The  following  standards  were  applied  during  the assessment  of  the  product  against  the  requirements  of the Directive 1999/5/EC: • Radio: EN 300 328 and/or EN 301 893 as applicable • EMC: EN 301 489-1, EN 301 489-17 • Safety: EN 60950-1 and either EN 50385 or EN 50371For the Linksys Wireless-N, -G, -B, and/or -A products, the following CE mark, and class 2 identifier are added to the equipment.National RestrictionsThis product may be used in all EU countries (and other countries following the  EU directive 1999/5/EC)  without any limitation except for the countries mentioned below:Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune  limitation,  excepté  pour  les  pays  mentionnés  ci-dessous:Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le  direttive EU 1999/5/EC)  senza nessuna  limitazione,  eccetto  per  i  paesi  menzionati  di seguito:Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt  werden  (sowie  in  anderen  Staaten  die  der  EU Direktive  1999/5/CE  folgen)  mit  Außnahme  der  folgenden aufgeführten Staaten:In the majority of the EU and other European countries, the 2,4- and 5-GHz bands have been made available for the  use  of  wireless  local  area  networks  (LANs).  Later  in this document you  will find  an overview  of countries  in which additional restrictions or requirements or both are applicable.The  requirements  for  any  country  may  evolve.  Linksys recommends that you check with the local authorities for the latest status of their national regulations for both the 2,4- and 5-GHz wireless LANs.The  following  countries  have  restrictions  and/or requirements  in  addition  to  those  given  in  the  table labeled “Overview of Regulatory Requirements for Wireless LANs”:DenmarkIn Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.I Danmark må  frekvensbåndet 5150 -  5350 også anvendes udendørs.FranceFor  2,4  GHz,  the  product  should  not  be  used  outdoors in the band 2454 - 2483,5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band OR when used  indoors.  Check  http://www.arcep.fr/  for  more details.Pour  la  bande  2,4  GHz,  l’  équipement  ne  doit  pas  être utilisé  en  extérieur  dans  la  bande  2454-  2483,5  MHz.  Il n’y a aucune restriction pour son utilisation dans d’autres parties  de  la  bande  des  2,4  GHz  ainsi  que  pour  une utilisation  en  intérieur.  Consultez  http://www.arcep.fr/ pour de plus amples détails.ItalyThis  product  meets  the  National  Radio  Interface  and the  requirements  specified  in  the  National  Frequency Allocation Table for Italy. Unless this 2,4-GHz wireless LAN product is operating within the boundaries of the owner’s property,  its  use  requires  a  “general  authorization”. Bands  5150-5350  MHz  and  5470-5725  MHz  require general  authorization  if  used  outdoors.  Please  check http://www.comunicazioni.it/it/ for more details.Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all’interno del  proprio  fondo,  l’utilizzo  di  prodotti  Wireless  LAN  a
Appendix C Regulatory Information13Wireless ADSL2+ Modem Router2,4 GHz richiede una “Autorizzazione Generale”. L’utilizzo all’aperto  delle  bande  di  frequenza  5150-5350  MHz  e 5470-5725  MHz  è  soggetto  ad  autorizzazione  generale. Consultare  http://www.comunicazioni.it/it/  per maggiori dettagli.LatviaThe  outdoor  usage  of  the  2,4  GHz  band  requires  an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details.2,4  GHz  frekveču  joslas  izmantošanai  ārpus  telpām nepieciešama atļauja no Elektronisko sakaru direkcijas. Vairāk informācijas: http://www.esd.lv.Notes: 1.  Although Norway, Switzerland  and Liechtenstein  are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries.2.  The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm).Product Usage RestrictionsThis product is designed for indoor usage only. Outdoor usage  is  not  recommended,  unless  otherwise  noted. Outdoor usage may even be prohibited (see below).2,4 GHz RestrictionsThis product is designed for use with the standard, integral or  dedicated  (external)  antenna(s)  that  is/are  shipped together with the equipment. However, some applications may require the antenna(s), if removable, to be separated from the product and installed remotely from the device by using extension cables. For these applications, Linksys offers an R SMA extension cable (AC9SMA) and an R-TNC extension  cable  (AC9TNC).  Both  of  these  cables  are  9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain  antennas,  the  HGA7S  (with  R-SMA  connector)  and HGA7T  (with  R-TNC  connector).  These  antennas  have  a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable.Combinations of extension cables and antennas resulting in  a  radiated  power  level  exceeding  20  dBm  (100  mW) EIRP (2,4 GHz band) are illegal.5 GHz RestrictionsProducts  that  operate  in  any  frequency  within  5150  to 5350 MHz are restricted to indoor use only, in all European countries except Denmark.Third-Party Software or FirmwareThe use of software or firmware not supported/provided by  Linksys  may  result  that  the  equipment  is  no  longer compliant with the regulatory requirements.Technical Documents on  www.linksysbycisco.com/internationalFollow these steps to access technical documents:1.  Enter http://www.linksysbycisco.com/international in your web browser.2.  Select the country or region in which you live.3.  Click the Products tab.4.  Select the appropriate product category.5.  Select the product sub-category, if necessary.6.  Select the product.Note  to  US  model  owner: To  comply  with  US  FCC regulation,  the  country  selection  function  has  been completely  removed  from  all  US  models. The  above function is for non-US models only.7.  Select the type of documentation you want from the More Information section. The document will open in PDF format if you have Adobe Acrobat installed on your computer.NOTE:  If  you  have  questions  regarding the  compliance  of  this  product  or  you cannot  find  the  information  you  need, please  contact  your  local  sales  office  or  visit  www.linksysbycisco.com/international
Appendix C Regulatory Information14Wireless ADSL2+ Modem RouterUser Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE)This document contains important information for users with  regards  to  the  proper  disposal  and  recycling  of Linksys  products.  Consumers  are  required  to  comply with  this  notice  for  all  electronic  products  bearing  the following symbol:English - Environmental Information for Customers in the European UnionEuropean  Directive  2002/96/EC  requires  that  the  equipment bearing this symbol   on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates  that  this  product  should  be  disposed  of  separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential  negative  consequences  to  the  environment  and human health. For more detailed information about the disposal of  your  old  equipment,  please  contact  your  local  authorities, waste  disposal  service,  or  the  shop  where  you  purchased  the product.Български  (Bulgarian)  -  Информация  относно опазването  на  околната  среда  за  потребители  в Европейския съюзЕвропейска директива 2002/96/EC изисква уредите, носещи този символ   върху изделието и/или опаковката му, да  не се  изхвърля  т  с  несортирани  битови  отпадъци.  Символът обозначава, че изделието трябва да се изхвърля отделно от сметосъбирането  на  обикновените  битови  отпадъци.  Ваша е отговорността този и другите електрически и електронни уреди  да  се  изхвърлят  в  предварително  определени  от държавните или общински органи специализирани пунктове за  събиране.  Правилното  изхвърляне  и  рециклиране ще  спомогнат  да  се  предотвратят  евентуални  вредни  за околната среда  и здравето на  населението последствия. За по-подробна информация относно изхвърлянето на вашите стари уреди се обърнете към местните власти, службите за сметосъбиране или магазина, от който сте закупили уреда.Čeština  (Czech)  -  Informace  o  ochraně  životního prostředí pro zákazníky v zemích Evropské unieEvropská směrnice 2002/96/ES zakazuje, aby zařízení označené tímto symbolem   na produktu anebo na obalu bylo likvidováno s  netříděným  komunálním  odpadem.  Tento  symbol  udává, že  daný  produkt  musí  být  likvidován  odděleně  od  běžného komunálního odpadu. Odpovídáte za likvidaci tohoto produktu a dalších elektrických a elektronických zařízení prostřednictvím určených  sběrných  míst  stanovených  vládou  nebo  místními úřady.  Správná  likvidace  a  recyklace  pomáhá  předcházet potenciálním negativním dopadům na životní prostředí a lidské zdraví.  Podrobnější  informace  o  likvidaci  starého  vybavení  si laskavě  vyžádejte  od  místních  úřadů,  podniku  zabývajícího  se likvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili.Dansk (Danish) - Miljøinformation for kunder i EUEU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol   på  produktet  og/eller  emballagen  ikke  må  bortskaffes  som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det  er  dit  ansvar  at  bortskaffe  dette  og  andet  elektrisk  og elektronisk  udstyr  via  bestemte  indsamlingssteder  udpeget af  staten  eller  de  lokale  myndigheder.  Korrekt  bortskaffelse og  genvinding  vil  hjælpe  med  til  at  undgå  mulige  skader  for miljøet  og  menneskers  sundhed.  Kontakt  venligst  de  lokale myndigheder,  renovationstjenesten  eller  den  butik,  hvor  du har købt produktet, angående mere detaljeret information om bortskaffelse af dit gamle udstyr.Deutsch  (German)  -  Umweltinformation  für  Kunden innerhalb der Europäischen UnionDie Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist  , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin,  dass  das  Produkt  von  regulärem  Haushaltmüll  getrennt entsorgt werden sollte. Es  liegt  in  Ihrer Verantwortung,  dieses Gerät  und  andere  elektrische  und  elektronische  Geräte  über die  dafür  zuständigen  und  von  der  Regierung  oder  örtlichen Behörden  dazu  bestimmten  Sammelstellen  zu  entsorgen. Ordnungsgemäßes  Entsorgen  und  Recyceln  trägt  dazu  bei, potentielle  negative  Folgen  für  Umwelt  und  die  menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die  örtlichen  Behörden  oder  städtischen  Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.
Appendix C Regulatory Information15Wireless ADSL2+ Modem RouterEesti  (Estonian)  -  Keskkonnaalane  informatsioon Euroopa Liidus asuvatele klientideleEuroopa  Liidu  direktiivi  2002/96/EÜ  nõuete  kohaselt  on seadmeid,  millel  on  tootel  või  pakendil  käesolev  sümbol  , keelatud  kõrvaldada  koos  sorteerimata  olmejäätmetega.  See sümbol  näitab,  et  toode  tuleks  kõrvaldada  eraldi  tavalistest olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva ja  ka  muud  elektri-  ja  elektroonikaseadmed  riigi  või  kohalike ametiasutuste  poolt  ette  nähtud  kogumispunktide  kaudu. Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida võimalikke  negatiivseid  tagajärgi  keskkonnale  ning  inimeste tervisele.  Vanade  seadmete  kõrvaldamise  kohta  täpsema informatsiooni  saamiseks  võtke  palun  ühendust  kohalike ametiasutustega, jäätmekäitlusfirmaga  või  kauplusega,  kust  te toote ostsite.Español (Spanish) - Información medioambiental para clientes de la Unión EuropeaLa  Directiva  2002/96/CE  de  la  UE  exige  que  los  equipos  que lleven este símbolo   en el propio aparato y/o en su embalaje no  deben  eliminarse  junto  con  otros  residuos  urbanos  no seleccionados.  El  símbolo  indica  que  el  producto  en  cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.Ελληνικά  (Greek)  -  Στοιχεία  περιβαλλοντικής προστασίας  για  πελάτες  εντός  της  Ευρωπαϊκής ΈνωσηςΣύμφωνα με την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισμός που φέρει αυτό το σύμβολο   στο προϊόν ή/και τη συσκευασία του δεν πρέπει να απορρίπτεται μαζί με τα μη διαχωρισμένα αστικά απορρίμματα. Το  σύμβολο  υποδεικνύει  ότι  αυτό  το  προϊόν θα πρέπει  να  απορρίπτεται  ξεχωριστά  από  τα  συνήθη  οικιακά απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος και άλλου  ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω  των καθορισμένων  εγκαταστάσεων  συγκέντρωσης  απορριμμάτων, οι οποίες ορίζονται από το κράτος ή τις αρμόδιες τοπικές αρχές. Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη ενδεχόμενων  αρνητικών  επιπτώσεων  στο  περιβάλλον  και  την υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη του  παλαιού  σας  εξοπλισμού,  επικοινωνήστε  με  τις  τοπικές αρχές, τις υπηρεσίες αποκομιδής απορριμμάτων ή το κατάστημα από το οποίο αγοράσατε το προϊόν.Français  (French)  -  Informations  environnementales pour les clients de l’Union européenneLa  directive  européenne  2002/96/CE  exige  que  l’équipement sur  lequel  est  apposé  ce  symbole    sur  le  produit  et/ou  son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il  est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par  le  gouvernement  et  les  pouvoirs  publics  des  collectivités territoriales. L’élimination et le recyclage en bonne et due forme ont pour  but  de  lutter  contre l’impact néfaste potentiel de  ce type de produits sur l’environnement et la santé publique. Pour plus  d’informations  sur  le  mode  d’élimination  de  votre  ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.Italiano  (Italian)  -  Informazioni  relative  all’ambiente per i clienti residenti nell’Unione EuropeaLa direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate  con  questo  simbolo    sul  prodotto  e/o sull’imballaggio  non  siano  smaltite  insieme  ai  rifiuti  urbani non  differenziati.  Il  simbolo  indica  che  questo  prodotto  non deve  essere  smaltito  insieme  ai  normali  rifiuti  domestici.  È responsabilità  del  proprietario  smaltire  sia  questi  prodotti  sia le  altre  apparecchiature  elettriche  ed  elettroniche  mediante le  specifiche  strutture di  raccolta  indicate  dal  governo  o  dagli enti  pubblici  locali.  Il  corretto  smaltimento  ed  il  riciclaggio aiuteranno a  prevenire  conseguenze  potenzialmente  negative per  l’ambiente  e  per  la  salute  dell’essere  umano.  Per  ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.Latviešu  valoda  (Latvian)  -  Ekoloģiska  informācija klientiem Eiropas Savienības jurisdikcijāDirektīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota zīme    uz  paša  izstrādājuma  vai  uz  tā  iesaiņojuma,  nedrīkst izmest  nešķirotā  veidā  kopā  ar  komunālajiem  atkritumiem (tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar parastiem  mājsaimniecības  atkritumiem.  Jūsu  pienākums  ir  šo un  citas  elektriskas  un  elektroniskas  ierīces  izmest  atkritumos, izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos un  pārstrāde  tiek  veikta  pareizi,  tad  mazinās  iespējamais kaitējums  dabai  un  cilvēku  veselībai.  Sīkākas  ziņas  par novecojuša aprīkojuma  izmešanu  atkritumos  jūs  varat  saņemt vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, kur iegādājāties šo izstrādājumu.
Appendix C Regulatory Information16Wireless ADSL2+ Modem RouterLietuvškai  (Lithuanian)  -  Aplinkosaugos  informacija, skirta Europos Sąjungos vartotojamsEuropos  direktyva  2002/96/EC  numato,  kad  įrangos,  kuri  ir   kurios  pakuotė  yra  pažymėta  šiuo  simboliu  (įveskite  simbolį), negalima  šalinti  kartu  su  nerūšiuotomis  komunalinėmis atliekomis.  Šis  simbolis  rodo,  kad  gaminį  reikia  šalinti  atskirai nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad ši  ir  kita  elektros  ar  elektroninė  įranga  būtų  šalinama  per  tam tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo sistemas. Tinkamai šalinant ir perdirbant atliekas, bus  išvengta galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos apie  jūsų  senos  įrangos  šalinimą  gali  pateikti  vietinės  valdžios institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose įsigijote tą gaminį.Malti  (Maltese)  -  Informazzjoni  Ambjentali  għal Klijenti fl-Unjoni Ewropea Id-Direttiva  Ewropea  2002/96/KE  titlob  li  t-tagħmir  li  jkun  fih is-simbolu    fuq  il-prodott  u/jew  fuq  l-ippakkjar  ma  jistax jintrema  ma’  skart  muniċipali  li  ma  ġiex  isseparat.  Is-simbolu jindika li dan il-prodott għandu jintrema separatament minn ma’ l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi dan  it-tagħmir  u  kull  tagħmir  ieħor  ta’  l-elettriku  u  elettroniku permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew mill-awtoritajiet  lokali.  Ir-rimi  b’mod  korrett  u  r-riċiklaġġ  jgħin jipprevjeni  konsegwenzi  negattivi  potenzjali  għall-ambjent  u għas-saħħa  tal-bniedem.  Għal  aktar  informazzjoni  dettaljata dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew il-ħanut minn fejn xtrajt il-prodott.Magyar (Hungarian) - Környezetvédelmi információ az európai uniós vásárlók számáraA  2002/96/EC  számú  európai  uniós  irányelv  megkívánja, hogy  azokat  a  termékeket,  amelyeken,  és/vagy  amelyek csomagolásán  az  alábbi  címke    megjelenik,  tilos  a  többi szelektálatlan  lakossági  hulladékkal  együtt  kidobni.  A  címke azt  jelöli,  hogy  az  adott  termék  kidobásakor  a  szokványos háztartási hulladékelszállítási rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön felelõssége, hogy ezt, és más elektromos és  elektronikus  berendezéseit  a  kormányzati  vagy  a  helyi hatóságok  által  kijelölt  gyűjtõredszereken  keresztül  számolja fel. A  megfelelõ  hulladékfeldolgozás segít  a  környezetre  és  az emberi  egészségre  potenciálisan  ártalmas  negatív  hatások megelõzésében.  Ha  elavult  berendezéseinek  felszámolásához további  részletes  információra  van  szüksége,  kérjük,  lépjen kapcsolatba  a  helyi  hatóságokkal,  a  hulladékfeldolgozási szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta.Nederlands  (Dutch)  -  Milieu-informatie  voor  klanten in de Europese UnieDe Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool   op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de  vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen.  De  juiste  vernietiging  en  recycling  van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het  milieu  en  de  gezondheid.  Voor  meer  informatie  over  het vernietigen van uw oude apparatuur neemt u contact op  met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft.Norsk (Norwegian) - Miljøinformasjon for kunder i EUEU-direktiv  2002/96/EF  krever  at  utstyr  med  følgende  symbol   avbildet  på  produktet  og/eller  pakningen,  ikke  må  kastes sammen  med  usortert  avfall.  Symbolet  indikerer  at  dette produktet  skal  håndteres  atskilt  fra  ordinær  avfallsinnsamling for  husholdningsavfall.  Det  er  ditt  ansvar  å  kvitte  deg  med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger  slik  myndighetene  eller  kommunene bestemmer.  Korrekt  avfallshåndtering  og  gjenvinning  vil være  med  på  å  forhindre  mulige  negative  konsekvenser  for miljø  og  helse.  For  nærmere  informasjon  om  håndtering  av det  kasserte  utstyret  ditt,  kan  du  ta  kontakt  med  kommunen, en  innsamlingsstasjon  for  avfall  eller  butikken  der  du  kjøpte produktet.Polski  (Polish)  -  Informacja  dla  klientów  w  Unii Europejskiej  o  przepisach  dotyczących  ochrony środowiskaDyrektywa  Europejska  2002/96/EC  wymaga,  aby  sprzęt oznaczony  symbolem    znajdującym  się  na  produkcie  i/lub  jego  opakowaniu  nie  był  wyrzucany  razem  z  innymi niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, że  produkt  nie  powinien  być  usuwany  razem  ze  zwykłymi odpadami  z  gospodarstw  domowych.  Na  Państwu  spoczywa obowiązek  wyrzucania  tego  i  innych  urządzeń  elektrycznych oraz  elektronicznych  w  punktach  odbioru  wyznaczonych przez  władze  krajowe  lub  lokalne.  Pozbywanie  się  sprzętu we  właściwy  sposób  i  jego  recykling  pomogą  zapobiec potencjalnie  negatywnym  konsekwencjom  dla  środowiska  i zdrowia ludzkiego. W celu uzyskania szczegółowych informacji o usuwaniu starego sprzętu, prosimy zwrócić  się  do  lokalnych władz, służb oczyszczania miasta lub sklepu, w którym produkt został nabyty.
Appendix C Regulatory Information17Wireless ADSL2+ Modem RouterPortuguês (Portuguese) - Informação ambiental para clientes da União EuropeiaA  Directiva  Europeia  2002/96/CE  exige  que  o  equipamento que exibe este símbolo   no produto e/ou na sua embalagem não  seja  eliminado  junto  com  os  resíduos  municipais  não separados.  O  símbolo  indica  que  este  produto  deve  ser eliminado  separadamente  dos  resíduos  domésticos  regulares. É  da  sua  responsabilidade  eliminar  este  e  qualquer  outro equipamento  eléctrico  e  electrónico  através  das  instalações de  recolha  designadas  pelas  autoridades  governamentais  ou locais. A eliminação e reciclagem correctas ajudarão a prevenir as  consequências  negativas  para  o  ambiente  e  para  a  saúde humana.  Para  obter  informações  mais  detalhadas  sobre  a forma  de  eliminar  o  seu  equipamento  antigo,  contacte  as autoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto.Română  (Romanian)  -  Informaţii  de  mediu  pentru clienţii din Uniunea EuropeanăDirectiva europeană 2002/96/CE impune ca echipamentele care prezintă acest simbol   pe produs şi/sau pe ambalajul acestuia să nu fie casate împreună cu gunoiul menajer municipal. Simbolul indică  faptul  că  acest  produs  trebuie  să  fie  casat  separat  de gunoiul  menajer  obişnuit.  Este  responsabilitatea  dvs.  să  casaţi acest  produs  şi  alte  echipamente  electrice  şi  electronice  prin intermediul unităţilor de colectare special desemnate de guvern sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta la prevenirea potenţialelor consecinţe negative asupra sănătăţii mediului  şi  a  oamenilor.  Pentru  mai  multe  informaţii detaliate cu  privire  la  casarea  acestui  echipament  vechi,  contactaţi autorităţile locale,  serviciul  de  salubrizare  sau  magazinul  de  la care aţi achiziţionat produsul.Slovenčina (Slovak) - Informácie o ochrane životného prostredia pre zákazníkov v Európskej úniiPodľa  európskej  smernice  2002/96/ES  zariadenie  s  týmto symbolom    na  produkte  a/alebo  jeho  balení  nesmie  byť likvidované  spolu  s  netriedeným  komunálnym  odpadom. Symbol  znamená,  že  produkt  by  sa  mal  likvidovať  oddelene od  bežného  odpadu  z  domácností.  Je  vašou  povinnosťou likvidovať  toto  i  ostatné  elektrické  a  elektronické  zariadenia prostredníctvom špecializovaných zberných zariadení určených vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia pomôže zabrániť prípadným negatívnym dopadom na životné prostredie  a  zdravie  ľudí.  Ak  máte  záujem  o  podrobnejšie informácie o likvidácii starého zariadenia, obráťte sa, prosím, na miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov alebo obchod, v ktorom ste si produkt zakúpili.Slovenščina  (Slovene)  -  Okoljske  informacije  za stranke v Evropski unijiEvropska direktiva 2002/96/ES prepoveduje odlaganje opreme s tem simbolom   – na izdelku in/ali na embalaži z nesortiranimi komunalnimi  odpadki. Ta  simbol  opozarja,  da  je  treba  izdelek zavreči  ločeno  od  preostalih  gospodinjskih  odpadkov.  Vaša odgovornost  je,  da  to  in  preostalo  električno  in  elektronsko opremo  oddate  na  posebna  zbirališča,  ki  jih  določijo  državne ustanove  ali  lokalne  oblasti.  S  pravilnim  odlaganjem  in recikliranjem  boste  preprečili  morebitne  škodljive  vplive  na okolje in zdravje ljudi.  Če želite izvedeti več o odlaganju stare opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali trgovino, kjer ste izdelek kupili.Suomi  (Finnish)  -  Ympäristöä  koskevia  tietoja  EU-alueen asiakkailleEU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä symboli    itse  tuotteessa  ja/tai  sen  pakkauksessa,  laitteistoa ei  saa  hävittää  lajittelemattoman  yhdyskuntajätteen  mukana. Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään tavallisesta  kotitalousjätteestä.  Sinun  vastuullasi  on  hävittää tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet viemällä  tuote  tai  tuotteet  viranomaisten  määräämään keräyspisteeseen.  Laitteiston  oikea  hävittäminen  estää mahdolliset  kielteiset  vaikutukset  ympäristöön  ja  ihmisten terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä myymälästä, josta ostit tuotteen.Svenska  (Swedish)  -  Miljöinformation  för  kunder  i Europeiska unionenDet europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol   på produkten och/eller förpackningen inte får kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt bör kastas efter att den avskiljts från vanligt hushållsavfall. Det faller på ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning på fastställda insamlingsplatser utsedda av  regeringen  eller  lokala  myndigheter.  Korrekt  kassering  och återvinning  skyddar  mot  eventuella  negativa  konsekvenser för miljön och personhälsa. För mer detaljerad information om kassering  av  din  gamla  utrustning  kontaktar  du  dina  lokala myndigheter,  avfallshanteringen  eller  butiken  där  du  köpte produkten.WEB:  For  additional  information,  please  visit www.linksysbycisco.com/international
Appendix C Regulatory Information18Wireless ADSL2+ Modem RouterAustraliaThe following information applies if you use the product within Australia.Safety Notice WARNING:  To  ensure  compliance  with exposure  limits  to  radiofrequency  fields,  the antenna of the device should be no closer than 20 cm from the body during use.New ZealandThe following information applies if you use the product within New Zealand.Telepermit StatementThe cabling between the phone port and the phone shall not exceed 100 metres.PTC200 General WarningThe  grant  of  a  Telepermit  for  any  item  of  terminal equipment  indicates  only  that  Telecom  has  accepted that  the  item  complies  with  minimum  conditions  for connection to its network.  It indicates no endorsement of the product by Telecom, nor does it  provide any sort of warranty.  Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.Wireless Connectivity Security on Cisco-Linksys ADSL2+ DevicesSetting  up  the  security  of  the  wireless  connection associated with ADSL2+ device is the user’s responsibility.  Telecom  will  take  no  responsibility  for  charges made  to user’s accounts due to poorly organized wireless security allowing unknown users to connect to the Internet via this device.  Do not complain to the Telecom Fault Service or Jetstream Helpdesk should this occur.General Warning for Cisco-Linksys ADSL2+  Devices and ADSL2+ CapabilityThis device has been tested and found suitable to connect to the Telecom ADSL2+ capability.  This indicates only that Telecom has accepted that this device complies with the spectrum management plan for ADSL2+ on copper cable and  with  simple  voiceband compatibility  tests included in  PTC273.    It  does  not  indicate  that  this  device  is  fully compatible  with  all  services  accessed  via  the  ADSL2+ capability.    Contact  the  supplier  of  the  device  when issues occur.  Do not call the Telecom Fault Service or the Jetstream Helpdesk.Cisco-Linksys ADSL2+ Devices on Long LinesADSL2+ devices may not achieve the type of “high speed” operation expected when attached to a line that is longer than  intended  by  the  ITU-T  Rec.  G.996.1  ADSL  standard i.e. >3 km of 0.4mm cable or a shorter cable length with several tails or multiples.  If the device is installed in such conditions  and  does  not  give  the  expected “download” performance, then do not refer the matter to the Telecom Fault Service or ADSL Helpdesk.United States of AmericaThe following information applies if you use the product within the United States of America.Federal Communications Commission (FCC) StatementThis  equipment  has  been  tested  and  found  to  comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  protection  against  harmful  interference  in  a residential  installation.   This  equipment  generates,  uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no  guarantee that interference will not occur in a  particular  installation.    If  this  equipment  does  cause harmful  interference  to  radio  or  television  reception, which  can  be  determined  by  turning  the  equipment off and  on,  the  user  is  encouraged  to try  to  correct  the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect  the  equipment  into  an  outlet  on  a  circuit different from that to which the receiver is connected. • Consult  the  dealer  or  an  experienced  radio/TV technician for help.This  device  complies  with  Part  15  of  the  FCC  Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must  accept any interference received, including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
Appendix C Regulatory Information19Wireless ADSL2+ Modem RouterFCC Radiation Exposure StatementThis  equipment  complies  with  FCC  radiation  exposure limits  set  forth  for  an  uncontrolled  environment.  This equipment  should  be  installed  and  operated  with minimum  distance  20cm  between  the  radiator  &  your body.This transmitter  must  not  be  co-located  or operating  in conjunction with any other antenna or transmitter.The  availability  of  some  specific  channels  and/or operational  frequency  bands  are  country  dependent and  are  firmware  programmed  at  the  factory  to  match the  intended  destination.  The  firmware  setting  is  not accessible by the end user.FCC Part 68 StatementThis  equipment  complies  with  Part  68  of  the  FCC  rules and  the  requirements  adopted  by  the  ACTA.  On  the bottom of this equipment is a label that contains, among other  information,  a  product  identifier  in  the  format US: Q87DL01BX2000V2.  If requested, this number must be provided to the telephone company.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.  For  products  approved  after  July  23,  2001, the REN for this product is part of the product identifier that  has  the  format  US:  Q87DL01BX2000V2.  The  digits represented  by  01are  the  REN  without  a  decimal  point (e.g., 03  is a REN  of 0.3). For earlier products, the  REN is separately shown on the label.A plug  and  jack  used  to connect  this  equipment  to the premises  wiring  and  telephone  network  must  comply with  the  applicable  FCC Part  68  rules  and  requirements adopted  by  the  ACTA.  A  compliant telephone  cord  and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.If your equipment causes harm to the telephone network, the  telephone  company  may  discontinue  your  service temporarily.  If  possible,  they  will  notify  you  in  advance. But if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file  a  complaint with  the FCC. Your  telephone  company may make changes in it is facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to  give  you  an  opportunity  to  maintain  uninterrupted telephone service.If you experience trouble with this telephone equipment, Please contact the following address and phone number for information on obtaining service or repairs.The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.This equipment may not be used on coin service provided by the  telephone company. Connection to party lines  is subject to state tariffs.COMPANY:  Cisco Consumer Products LLC  ADDRESS:  121 Theory , Irvine, Ca., 92617, USA  TEL NO:    1 800-326-7114Safety Notices WARNING: To reduce the  risk of  fire, use  only No.26  AWG  or  larger  telecommunication  line cord. WARNING: Do not use this product near water, for  example,  in  a  wet  basement  or  near  a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: This equipment will be inoperable when main power fails. WARNING:  To  ensure  compliance  with explosure  limits  to  radiofrequency  fields,  the antenna of the device should be no closer than 20 cm from the body during use.
Appendix C Regulatory Information20Wireless ADSL2+ Modem Routerterminal.  Cette  conformité  est  confirmée  par  le numérod’enregistrement.  Le  sigle  IC,  placé  devant  le numéro  d’enregistrement,  signifie  quel’enregistrement s’est  effectué  conformément  à  une  déclaration  de conformité  et  indique  queles  spécifications  techniques d’Industrie  Canada  ont  été  respectées.  Il  n’implique pasqu’Industrie Canada a approuvé le matériel.AVIS  :  L’indice  d’équivalence  de  la  sonnerie  (IES)  du présent matériel est de 01. L’IESassigné à chaque dispositif terminal  indique  le  nombre  maximal  de  terminaux  qui peuvent  êtreraccordés  à  une  interface  téléphonique. La  terminaison  d’une  interface  peut  consister  en unecombinaison  quelconque  de  dispositifs,  à  la  seule condition  que  la  somme  d’indicesd’équivalence  de  la sonnerie de tous les dispositifs n’excède pas 5.Wireless DisclaimerThe maximum  performance  for wireless  is  derived  from IEEE Standard 802.11  specifications. Actual  performance can  vary,  including  lower  wireless  network  capacity, data throughput rate, range and coverage. Performance depends  on  many  factors,  conditions  and  variables, including  distance  from  the  access  point,  volume  of network  traffic,  building  materials  and  construction, operating  system  used,  mix  of  wireless  products  used, interference and other adverse conditions.Avis de non-responsabilité concernant les appar-eils sans filLes  performances  maximales  pour  les  réseaux  sans  fil sont  tirées  des  spécifications  de  la  norme  IEEE  802.11. Les  performances  réelles  peuvent  varier,  notamment en  fonction  de  la  capacité  du  réseau  sans  fil,  du  débit de  la  transmission  de  données,  de  la  portée  et  de  la couverture.  Les  performances  dépendent  de  facteurs, conditions  et  variables  multiples,  en  particulier  de  la distance par rapport au point d’accès, du volume du trafic réseau,  des  matériaux  utilisés  dans  le  bâtiment  et  du type de construction, du système d’exploitation et de la combinaison de produits sans fil utilisés, des interférences et de toute autre condition défavorable.CanadaThe following information applies if you use the product within Canada.Industry Canada statement:This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may  not cause  harmful  interference, and (2)  this  device  must  accept  any  interference  received, including  interference  that  may  cause  undesired operation.Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son  fonctionnement  est  sujet  aux  deux  conditions suivantes:  (1)  le  dispositif  ne  doit  pas  produire  de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.IMPORTANT NOTE:  Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.NOTE IMPORTANTE: (Pour l’utilisation de dispositifs mobiles) Déclaration d’exposition aux radiations:Cet  équipement  est  conforme  aux  limites  d’exposition aux  rayonnements  IC  établies  pour  un  environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.NOTICE:  This  equipment  meets  the  applicable  Industry Canada  Terminal  Equipment  Technical  Specifications. This  is  confirmed  by  the  registration  number.  The abbreviation, IC, before the registration number signifies that registration was performed  based on  a  Declaration of Conformity  indicating that  Industry  Canada technical specifications were met.  It  does not  imply  that  Industry Canada approved the equipment.NOTICE:  The  Ringer  Equivalence  Number  (REN)  for this  terminal  equipment  is  01.  The  REN  assigned  to each  terminal  equipment  provides  an  indication  of  the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.AVIS : Le présent matériel est conforme aux spécifications techniques  d’Industrie  Canadaapplicables  au  matériel  110310-10_20-10C-AI3425-01414
www.linksys.com/supportCisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. © 2011 Cisco and/or its affiliates. All rights reserved.

Navigation menu