LITE ON TECHNOLOGY CX8703LB JukeBlox Networked Media Module User Manual CX870 3LB UserMan 20121218

LITE-ON Technology Corp. JukeBlox Networked Media Module CX870 3LB UserMan 20121218

Contents

(CX870-3LB) UserMan_20121218

Download: LITE ON TECHNOLOGY CX8703LB JukeBlox Networked Media Module User Manual  CX870 3LB  UserMan 20121218
Mirror Download [FCC.gov]LITE ON TECHNOLOGY CX8703LB JukeBlox Networked Media Module User Manual  CX870 3LB  UserMan 20121218
Document ID1862983
Application IDPkd9DK1oo8Cb+2opnLmXqg==
Document Description(CX870-3LB) UserMan_20121218
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize118.6kB (1482473 bits)
Date Submitted2012-12-19 00:00:00
Date Available2012-12-24 00:00:00
Creation Date2012-12-18 16:27:39
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2012-12-18 16:28:53
Document TitleMicrosoft Word - _CX870-3LB_ UserMan_20121218.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Seven-F3

JukeBlox Networked Media Module
CX Series
Datasheet
•
Complete audio networking system on a small module
•
Integrated Ethernet + USB 2.0
•
WiFi-certified 802.11b/g
•
Built-in strip antenna
•
Optional 2X Diversity Antenna
•
Glueless audio, video and control ports
•
FCC certified
•
Ideal for enabling network and USB audio playback for iPod docks, audio
systems, AV Receivers, active speaker systems, internet radios, network
playback adaptors
SMSC CX Module
Revision 2.8 (09-30-12)
SMSC CONFIDENTIAL
JukeBlox Networked Media Modules – CX Series
Datasheet
Copyright © 2012 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this
document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR
CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER
BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY
REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Table of Contents
INTRODUCTION............................................................................................................... 4
BLOCK DIAGRAM ............................................................................................................. 4
BOARD PICTURES............................................................................................................ 5
3.1 TOP VIEW OF CX MODULE ................................................................................................... 5
3.2 BOTTOM VIEW OF CX MODULE .............................................................................................. 6
3.2.1 CX Module Bottom View w/64-pin Low Density Connector ........................................... 6
3.2.2 CX Module Bottom View w/120-pin Media Connector .................................................. 6
3.3 PRODUCTION MODULE WITH TOP AND RF SHIELDS IN PLACE – TOP VIEW ............................................. 7
3.4 PRODUCTION MODULE WITH 64-PIN CONNECTOR OPTION – SIDE VIEW .............................................. 7
3.5 EXAMPLE PRODUCTION MODULE SHOWING SOLDERED RF SHIELD ..................................................... 8
3.6 PRODUCTION MODULE WITH BOTTOM SHIELD (PART NUMBERS WITH A “B” AFTER THE CONFIGURATION LETTER) 9
3.6.1 Including J3 Low Density 64-pin connector – Bottom View........................................... 9
3.6.2 Including J2 High Density 120-pin connector – Bottom View ........................................ 9
4 ORDERING GUIDE ......................................................................................................... 10
4.1 PART NUMBER SYNTAX ..................................................................................................... 10
5 ELECTRICAL SPECIFICATIONS....................................................................................... 11
5.1 ABSOLUTE MAXIMUM RATINGS ............................................................................................ 12
5.2 OPERATING CONDITIONS ................................................................................................... 12
5.3 WIFI SPECIFICATION (CX870 ONLY) .................................................................................... 13
6 REGULATORY COMPLIANCE AND QUALITY .................................................................... 14
6.0.1 Antenna Considerations ........................................................................................... 15
6.0.2 CX Power Settings Used For Modular Approval ............................................................ 16
6.1 ROHS ........................................................................................................................ 16
6.2 ENVIRONMENTAL TEST ...................................................................................................... 16
6.3 ESD AND TRANSIENT TEST (APPLIES TO LAN AND USB EXTERNAL CONNECTIONS ONLY)......................... 16
6.4 MAGNETIC FIELD TEST ..................................................................................................... 16
6.5 MTBF ........................................................................................................................ 16
6.6 MECHANICAL SPECIFICATIONS ............................................................................................. 16
6.7 MODULE QUALITY ........................................................................................................... 16
7 BOARD DIMENSIONS AND WEIGHT ............................................................................... 17
7.1 TOP & BOTTOM VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD............................................... 17
7.1.1 Top & Bottom View of CX Module with Bottom Shield................................................ 17
7.2 SIDE VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD ........................................................... 18
7.2.1 Side View of CX Module with Bottom Shield except CX870-3JB .................................. 18
7.2.2 Side View of CX870 Module with Bottom Shield part number CX870-3JB only .............. 19
7.3 3D VIEW OF CX870 MODULE WITHOUT BOTTOM SHIELD ............................................................. 19
7.4 MODULE WEIGHT ........................................................................................................... 20
8 CONNECTORS AND CONNECTIONS ................................................................................ 20
8.1 WLAN UFL ANTENNA CONNECTOR (OPTIONAL)........................................................................ 20
8.2 MODULE CONNECTORS ..................................................................................................... 20
8.2.1 Pin Descriptions ................................................................................................... 21
8.2.2 Connector PIN Assignments................................................................................... 26
8.2.3 GPIO Assignments................................................................................................ 28
9 APPLICATION GUIDELINES ........................................................................................... 28
9.1 POWER SUPPLY SEQUENCING AND RESET TIMING ....................................................................... 28
9.1.1 Power up, Reset and Power Down Timing ................................................................ 29
9.2 RF CONSIDERATIONS ...................................................................................................... 29
10 REVISION CONTROL .................................................................................................... 30
11 APPENDIX 1: CERTIFICATION NOTICES ...................................................................... 39
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Introduction
The CX-series module is a single-board networked media player module, based on SMSC’s DM870A and DM875
media processors, and enables fast product developments with Ethernet, USB and optional WiFi connectivity. The
module connects to standard legacy components in various audio, video/LCD and control formats.
Block Diagram
JukeBlox Networked Media Module – CX Series
DM870A
or
DM875
3.3V
1.2V
1.9V
Reset In
RJ-45
Transformer
RST
Ethernet
Transceiver
USB
Type-A
3x6bit RGB
Display
Apple Coprocessor
I2C
A/D, D/A
S/PDIF
Video Out
Audio I/O
UART
JTAG
Host
Controller/
LCD setup
SPI Ctrl.
GPIO
NAND-Flash
USB
Mem.
Bus
256 Mbit
SDRAM
NOR-Flash
I2C
802.11
PWM DAC
CCIR-656
Flash
LCD
SSM
4/8bit MMC
SD-Card
RMII
2.4 GHz RF
transceiver
DAC
AV
Ports
UART
JTAG
SPI
RF Amp. ANT
switch
Ext.
PCB
Ext.
PCB
Antenna Antenna Antenna Antenna
24.000 MHz
GPIO
Note: Choice of antenna is a build option, see Ordering Guide.
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Board Pictures
Please note that all production modules include the RF and top shield. The below top view has the shields
temporarily removed to show the components. Also, please note that the 64-pin connector mounted on the module is
the male gender.
3.1
Top View of CX Module
802.11b/g
front-end
SDRAM
PCB antenna
PCB antenna
SMSC CX Module
External Antenna
Connectors
SMSC processor
Ethernet PHY
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
3.2
3.2.1
Bottom View of CX Module
CX Module Bottom View w/64-pin Low Density Connector
LCD connector
FLASH
Low density
connector
3.2.2
CX Module Bottom View w/120-pin Media Connector
LCD
connector
FLASH
Media
connector
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
3.3 Production Module with Top and RF shields in
place – Top View
3.4 Production Module with 64-pin Connector Option –
Side View
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
3.5 Example Production Module Showing Soldered RF
Shield
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
3.6 Production Module with Bottom Shield (Part
Numbers with a “B” after the configuration letter)
3.6.1
Including J3 Low Density 64-pin connector – Bottom View
3.6.2
View
Including J2 High Density 120-pin connector – Bottom
SMSC CX Module
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Part Number
Ordering Guide
Status
SMSC ICs
Internal
PCB
Diversity
Antennas
Ext. Diversity
Antennas (UFL
Conn.)
One
Ant.
Low
density
64-pin
Conn.
Hi
density
120-pin
Conn.
Hi
density
LCD
Conn.
32MB
SDRAM
16MB
SDRAM
8MB
SDRAM
1Gb
NAND
8MB
NOR
Top
Module
Shield
Ethernet
USB
Host
Bottom
Module
Shield
Two
Ant.
CX870-3A
CO
DM870A+T6201
CX870-3B
DM870A+T6201
CX870-3D
CO
DM870A+T6201
CX870-3DS
CO
CX870-3F
DM870A+T6201
CX870-3G
DM870A+T6201
CX870-3H
DM870A+T6201
CX870-3I
DM870A+T6201
CX870-3J
DM870A+T6201
CX870-3K
CO
DM870A+T6201
CX870-3BB
SA
DM870A+T6201
CX870-3HB
SA
DM870A+T6201
CX870-3IB
SA
DM870A+T6201
CX870-3JB
SA
DM870A+T6201
CX870-3KB
CA
DM870A+T6201
(X)*
DM870A+T6201
CX780-3LB
CA
DM870A+T6201
CX870-3MB
CA
DM870A+T6201
CX875-3PB
SA
DM875+T6201
Note: Please note that the Apple Authentication Coprocessor will not be provided on the CX module. The Apple Authentication
Coprocessor should be provided on the product motherboard, connected to the SDA, SCL signals from the CX module.
Note: Shaded rows indicate Custom or Obsolete configuration - NOT TO BE USED FOR NEW/STANDARD MP DESIGNS.
Status code: C - Custom | S - Standard | O - Obsolete | A - Available
* Connector on board, but requires board modification to enable the connector.
+ The position of the X in the One Ant. column indicates that there is one external antenna connector provided. The position of the X
in the Two Ant. column indicates that there are two external antenna connectors provided. Do not use a module which has two
external antenna connectors with only one external antenna connected. Leaving one antenna socket open will degrade WiFi
performance. SMSC recommends always using modules with two external antennas for best performance.
% The CX870-3DS is the same as CX870-3D, except that the RF shield is soldered in place.
4.1
Part Number Syntax
SMSC CX Module
10
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Electrical Specifications
Parameter
State
Model
Voltage
Power Supply Input Voltage
Symbol
min.
typ.
max.
Units
3.0
VIN
1.08
3.3
3.6
1.2
1.32
1.8
1.9
2.0
Logic Input high voltage
VIH
1.7
5.5
Logic Input low voltage
VIL
-0.3
0.7
Logic Input threshold voltage
VIT
1.29
1.39
1.5
Schmitt-trigger input low to
high threshold voltage
VIT+
1.58
1.65
1.71
Schmitt-trigger input high to
low threshold voltage
VIT-
0.95
1.01
1.06
Logic Output high voltage
VOH
2.4
Logic Output low voltage
VOL
Logic Low-level output
current
IOL
-9.6
IOH
11.1
0.4
-15.6
-19.3
mA
22.5
35.3
mA
(VOL=0.4V)
Logic High-level output
current
(VOH=2.4V)
Reset State
Current Consumption
Operating in
idle state
CX870
Playback over
WiFi high mips
& rate
condition
3.3
I3.3
60
78
mA
1.2
I1.2
32
42
mA
1.9
I1.9
18
23
mA
3.3
I3.3
185
241
mA
1.2
I1.2
337
438
mA
1.9
I1.9
257
334
mA
3.3
I3.3
240
312
mA
1.2
I1.2
347
451
mA
1.9
I1.9
258
335
mA
Note: The maximum current values are 30% larger than the typical values. The maximum
values are intended to be used for power supply sizing calculations.
SMSC CX Module
11
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
5.1
Absolute Maximum Ratings
Parameter
Component
Max
Units
3.3V Supply Voltage
-0.5
4.6
1.2V Supply Voltage
-0.5
1.8
-0.5
2.2
Logic Input Voltage
-0.5
Logic Output Voltage
-0.5
4.6
1.9V Supply Voltage
5.2
Min
Main
Operating Conditions
Parameter
Min
Max
Units
+70
°C
Operating Temperature
SMSC CX Module
Operating Humidity
10
90 (non condensing)
%RH
Storage Temperature
-10
+75
°C
Storage Humidity
10
95 (non condensing)
%RH
Storage Temperature Cycle Test 24 hrs
-10
+75
°C
12
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
5.3
WiFi Specification (CX870 only)
Feature
Description
WLAN Standards
IEEE 802.11b
IEEE 802.11g
Frequency Band
2.412 – 2.472 GHz (2.4GHz ISM Band, 13 Channels)
Channel 1 - Channel 13
North America FCC, Japan Telec, Europe ETSI
Modulation
802.11b mode (DS-SS: IEEE 802.11b)
802.11g mode (OFDM: IEEE 802.11g)
Transmission Speed
802.11b mode
11Mbps, 5.5Mbps, 2Mbps, 1Mbps
802.11g mode
54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps
Tx Power
802.11b mode: 16.5dBm, +/-1dB
802.11g mode: 15.0dBm, +/-1dB
Using nominal production settings as follows:
Channel RF11
Rate: 11B ='3' (11Mbps), 11G = '8' (54Mbps)
MIB: 11B=9, 11G=1 (Reference for Tx Power Tuning)
Room temperature
The above TX Power specifications will apply to modules shipped from Liteon
after 9 April 2012.
Power-on Ramp
< 2us
RF Carrier Suppression
< 15dBc
TX EVM
802.11b mode: <-22dB
802.11g mode: <-25dB
Rx Sensitivity
802.11b mode:
(incl. CE2 Mother board)
<=-82dBm @ 1Mbps, <=81dBm @ 2Mbps, <=-81dBm @ 5.5Mbps,
<=-78dBm @ 11Mbps
802.11g mode:
<=-82dBm @ 9Mbps, <=-81dBm @ 18Mbps, <=-75dBm @ 36Mbps,
<=-70dBm @ 54Mbps
Throughput Rate
(measured for each
module)
See factory test specification
Note: About Tx Power, different (higher/lower) RF output power settings may be used for
specific regions, antennas and/or enclosures, in which case re-certification may be
required.
SMSC CX Module
13
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Regulatory Compliance and Quality
Description
Country
Compliance
Electromagnetic Compatibility
USA
FCC CFR47 Part15B
(Prescan)
Europe
EN 55022
Module Versions Passed
EN 55024
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
Radio Regulations (CX870
only)
USA
Japan
Canada
Europe
New Zealand/Australia
China
Korea
FCC Part 15C
Telec
IC RSS-210
CE
AZ/NZS:4268
SRRC
KCC
B, D, F, H, I, J
B, D, F, H, I, J
SMSC does not certify all module variants for all countries. Please see above table for those module versions for
which certain certifications have already been done.
Please contact your SMSC sales office for the latest information about which modules are certified for which
countries, and arranging for additional certification for your chosen module if needed. Any additional certifications will
need to be paid for by the customer.
Product manufacturers are responsible for the end product certification.
SMSC can help manufacturers to prepare for the WiFi Alliance tests by providing an example test plan and the
required commands to enable special test modes. Please contact your SMSC sales office about WiFi Alliance logo
certification assistance.
The CX module has received Limited Module Approval (LMA) from FCC. This is because the CX module does not
have a built-in +3.3V regulator circuit. SMSC recommends that customers follow the +3.3V supply voltage
requirements given in this data sheet, and follow the +3.3V power supply design given in “CX Module Power
Supply_V1.1.pdf” document or later version. If the power supply recommendations are followed, then customers will
not need to go through formal certification of the product for WiFi related RF behavior for FCC. It is the product
manufacturers responsibility to make sure that the power supply recommendations are followed, and that the RF
behavior meets the certification requirements when the module is installed in the final product.
Please check the SMSC/BridgeCo Customer Portal at https://portal.bridgeco.net/ for documents about WiFi
certification and recommended interfacing and power supply schematics.
SMSC CX Module
14
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
6.0.1 Antenna Considerations
Here are the antennas used for certification:
Cfg Code
Ant. Type
Ant. Gain (dBi)
CX870-3F
Printed on PCB
3.56
Ant. Model Name
Liteon
N/A
CX870-3J
Dipole
MAG. LAYERS
EDA-8709-2G4C1-A66
CX870-3K
PIFA
2.1
MAG. LAYERS
MSA-3612-2G4C1-A1
CX870-3IB
Dipole
MAG. LAYERS
EDA-8709-2G4C1-A66
CX870-3B-D60
CX870-3BB
PIFA
Dipole
MSA-0354-2G4C1-A3, black 200mm (max)
MSA-0345-2G4C1-A3, gray 200mm (max)
1.7
MSA-5103-2G4C1-A1, black 200mm
1.7
MSA-5403-2G4C1-A1, gray 200mm
1.7
MSA-5103-2G4C1-A3, black 300mm
1.7
MSA-5403-2G4C1-A3, gray 300mm
1.7
MSA-5103-2G4C1-A2, black 400mm
1.7
MSA-5403-2G4C1-A2, gray 400mm
3.2
WINiZEN
W1E-WO-08
CX870-3HB
Dipole
MAG. LAYERS
EDA-8709-2G4C1-A66
CX870-3HB
CX870-3LB
PIFA
Linear
polarization
3010000243ID (DA-E670)
2.8
3010000218ID (DA-E750)
1.28
1-888-241-00 (MFR:SKYTECH UNION INC)
0.84
1-888-241-00 (MFR: LEAD JUMP Development LTD.)
Notes about antenna changes:
1) Equivalent antennas from other manufacturers may be substituted, and then marketed
without a Class II permissive change
2) Equivalent antennas must be of the same type (e.g. dipole, PIFA, etc.), must be of
equal or less gain than the antennas listed and previously authorized under the same FCC
ID, and must have similar in band and out of band characteristics (consult specification
sheet for cutoff frequencies).
3) In case of new antenna types, or higher gain antennas, a Class II permissive change is
required and compliance with FCC section 15.203 must be met.
SMSC CX Module
15
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
6.0.2 CX Power Settings Used For Modular Approval
6.1
RoHS
Uses only RoHS compliant components
6.2
Environmental Test
Withstands 4 hours at 70°C, 90% RH
ESD and Transient Test (Applies to LAN and
USB external connections only)
6.3
ESD: +/- 2kV operation, +/- 4kV no destruction (part of CE test)
Fast electrical transients: +/- 500V operation, +/- 1000V no destruction (part of CE test)
6.4
Magnetic Field Test
Passes EN55022 and EN55024 (part of CE test)
6.5
MTBF
>10000 hours
6.6
Mechanical Specifications
Passes drop test according to I.E.C. 68-2-32, height 100 cm, 1 corner, 6 faces.
Passes vibration test with sine, vertical, 60 minutes, 600 to 18000 cpm, 1G
6.7
Module Quality
Defect Rate: < 1%
AQL CR=0, MA=0.4, MI=0.4
SMSC CX Module
16
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Board Dimensions and Weight
Top & Bottom View of CX870 Module without
Bottom Shield
7.1
7.1.1
Top & Bottom View of CX Module with Bottom Shield
SMSC CX Module
17
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
7.2
Side View of CX870 module without Bottom Shield
Note:
1.
2.
3.
4.
5.
6.
7.
All dimensions are measured in millimetres (mm).
PCB’s thickness: 1.00 +/- 0.10mm
Tolerance: +/-0.10mm
Outline Tolerance: +/-0.10mm
NPTH Hole: +/-0.05mm
PTH Hole: +/-0.075mm
Connector positions, board dimensions, mounting
hole positions and sizes are the same for all module
variants.
8. Connector position tolerance: +/- 0.38mm
9. The 64-pin connector mounted on the module along
one edge is the male gender.
10. Not all module variants have all connectors. Please
see the Ordering Guide table for details of connector
options.
7.2.1
3JB
Side View of CX Module with Bottom Shield except CX870-
SMSC CX Module
18
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
7.2.2 Side View of CX870 Module with Bottom Shield part
number CX870-3JB only
3D View of CX870 Module without Bottom
Shield
7.3
Note: A 3D file of the CX module in .stp format is available
from the SMSC Customer Portal.
SMSC CX Module
19
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
7.4
Module Weight
CX870: 20g
Note: Module weight applies to all versions of the module.
Connectors and Connections
8.1
WLAN UFL Antenna Connector (optional)
The module includes two PCB strip antennas operated in diversity mode. Alternatively, one or two coaxial antenna
connectors are provided for connecting external (to the module) antennas. The choice between using the strip
antenna or using the coaxial sockets is a build option, determined by the position of surface mount capacitors on the
module PCB. If the PCB antennas are chosen, then diversity mode is always used. If external (to the module)
antenna sockets are used, then two external antennas should be used to provide 2X diversity operation.
If external antenna is used, please choose the proper part number indicating two external antenna sockets. Do not
use a module which has two external antenna sockets with only one external antenna connected; this will result in
reduced WiFi performance.
Please see ordering guide for build option details.
The surface-mount antenna socket used in the CX module is:
UF.L type Ultra Small Surface Mount Coaxial Connector
8.2
Module Connectors
The CX860/870 module uses 3 board-to-board connectors as interfaces to the product main board. The part numbers
for the connectors needed on the product main board, which mate with the connectors on the CX module, are shown
in the table below.
Connector
Number
Connector
Purpose
J1
LCD
J2
Media
J3
Low Density
SMSC CX Module
Connector
Type
B2B
Connector
Number
of Pins
Pin
Configuration
Mating Connector Part Numbers
30
2 x 15 x 0.5mm
14-5046-030-145-829+ (Kyocera)
120
2 x 60 x 0.5mm
14-5046-120-145-829+ (Kyocera)
64
2 x 32 x 2.54mm
CSHA201-3202A001A1AB
20
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
The pinout and signal names are shown on the next page. The following table provides an overview for the most
important control and interface signals.
8.2.1
Pin Descriptions
Signal(s)
Type
Description
VIN(+3.3V)
Power supply input ; +3.3V.
VIN (+1.2V)
Power supply input ; +1.2V.
VIN (+1.9V)
Power Supply input; +1.9V for powering RF section. Make sure this is a clean supply.
3V3RTC
The RTC function is no longer supported. This pin should be left open.
GND
Ground (GND) connection for power supply 0V, signal returns and shielding.
SPI_DOUT
SPI data from DM870A to host controller.
SPI_DIN
SPI data from host controller to DM870A.
SPI_CLK
SPI clock from host controller to DM870A. Maximum recommended frequency is 2MHz,
typical frequency is 1MHz. See Note 2 below.
SPI_NCS0
SPI chip select from host controller to DM870A.
PDOUT1
This signal is used as SPI_REQ, SPI request signal, from DM870A to host controller for
eDMP applications. Logic 1 indicates that there is an SPI message waiting to be read, the
host controller should start the SPI clock and read any changed registers. Logic 0
indicates that all changed register messages have been read and the message buffer is
empty. Also GPIO-06.
SPI_NCS1
Not used. Leave open.
RXD1
UART1 input to the DM870A, used for shell access. SMSC recommends providing a
connection to an external RS-232 transceiver and DB9 connector to connect to a PC COM
port. Such a connection can be used for product development debugging, and for module
programming control on the product manufacturing line and for module control during
certification procedures.
TXD1
UART1 output from the DM870A, used for shell access. SMSC recommends providing a
connection to an external RS-232 transceiver and DB9 connector to connect to a PC COM
port. Such a connection can be used for product development debugging, and for module
programming control on the product manufacturing line and for module control during
certification procedures.
RXD0
UART0 input. Optionally used for controlling an iPod via UART.
TXD0
UART0 output. Optionally used for controlling an iPod via UART.
POWER
SPI
UART
SMSC CX Module
21
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
AUDIO
AV2DATA0
I2S or left justified audio data output. Typically connected to external D/A converter input
or to external DSP for further audio processing. Used for main left and right channel audio
output data. See Note 3.
AV2CTRL0
LRCK, audio data word clock at the audio sample rate (Fs). Maximum currently supported
frequency is 192kHz.
AV2CTRL1
MCLK, audio master clock at 256Fs. This can be used to clock an external D/A converter
or DSP.
AV2CLK
SCLK, audio data bit clock at 64Fs. Allows for up to 32 audio data bits per sample word.
AV4DATA1
SPDIF format output. Can support samples rates up to 192kHz, so the maximum
instantaneous frequency on this pin is 24.576MHz.
AV4DATA0
SPDIF input. Not used at present. Leave open.
AV2DATA1
I2S or left justified audio data output. Not used at present. Leave open.
AOUTLP/AOUTLN,
AOUTRP/AOUTRN
Differential stereo output from PWM-DAC, right and left channels. These signals require
analog low pass filtering. SMSC is not recommending using the PWM-DAC outputs
because of the potential for high out-of-band noise and uncharacterized audio quality.
SMSC recommends using an external D/A converter connected to AV2DATA0.
AV2DATA2
I2S or left justified audio data input. Can be driven from an optional external A/D
converter used to interface to iPod analog output or other analog audio sources. If not
used, leave open.
AV2DATA3
I2S or left justified audio data input. Not used at present. Leave open.
NCS3
This signal is configured as GPIO-17 and is currently not used. DM870A-internal pull-up.
Leave this pin open.
PDOUT0
Factory Reset. GPIO-04. Return the CnE to factory settings. High-active input, DM870Ainternal pull-down. Pull to GND with a 10kohm resistor, unless return to factory settings
from a hardware control is needed. Normally, return to factory settings is controlled from
the host controller via SPI register. This pin is only monitored during the boot up process.
VCO0
Infrared sensor input. GPIO-05. This is a Schmitt-Trigger input and can handle inputs with
slow slopes. Used for aDMP firmware builds for infrared remote control sensor output
connection to DM870A. For applications with a host controller, pull this pin to +3.3V via a
10kohm resistor.
AV3CLK
ETH_NRESET Low-active reset for the on-board ethernet PHY. This output is driven by
the DM870A. GPIO-12. Leave this pin open.
AV3CTRL0,
AV3CTRL1
I/O
I2C_SCL, I2C_SDA bus created by GPIO-13 and GPIO-14.
NRESET_MOD
Low-active input to reset the module. This signal must be driven by an external reset
generator, or by a GPIO output from a host controller. See the application section of this
data sheet for the timing requirements for NRESET_MOD. Includes internal 10K pull-up
resistor to +3.3V.
NPD_RF
Active low input to shut down the power for the 802.11 RF section. Internal 10kohm pullup resistor to +3.3V. Leave open if powering down the RF section is not required.
CONTROL
SMSC CX Module
No internal pull-ups; Use 4.7kohm pull up resistor on each pin to +3.3V. Maximum
frequency is 400kHz.
22
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
ETHERNET
ETH_RXN, ETH_RXP,
ETH_TXN, ETH_TXP
Ethernet signals between the PHY on the module and the external magnetics
(transformer). See Note 4. Maximum bit rate is 100Mbps.
ETH_LED_SPEED,
3.3V push-pull outputs (max. ±12mA) to drive the ethernet LEDs.
100Mbps speed mode and activity are indicated by the outputs being low. Connect to
LEDs through 220ohm resistors.
ETH_LED_ACT
USB
USB_DN, USB_DP
USB data signals, normally connected to type A connector, USB switch or iPod dock
connector. Maximum bit rate is USB High Speed at 480Mbps.
USB_VBUS
Analog input for monitoring USB type A connector power. Connect to the +5V power which
is driving the USB type A connector power pins. If this pin drops below 4.6V, then the
DM870A will drive the USBVBUSDRV signal low to control an external power MOSFET to
disconnect +5V power from the USB type A connector. See Note 5.
USBVBUSDRV
Logic output to control an external MOSFET that is in series with USB type A connector
power. See USB_VBUS above and Note 5.
I/O
JTAG port for DM870A. Leave open.
SSMD4, SSMD5,
SSMD6, SSMD7
I/O
Can be used to drive external shift registers to make extended GPIO signals (see Note 6),
or as individual GPIO signals, or to make an SD card interface. SD card firmware is not
supported at present in JB2. Can be mapped to GPIO #s 08,09,10,11. Leave open if not
used.
SSMD0, SSMD1,
SSMD2, SSMD3,
SSMCLK, SSMCP,
SSMCMD, SSMWP
I/O
Used to make an SD card interface. SD card firmware is not supported at present in JB2.
Leave open.
ITU-R BT.656 digital video output signals. Optionally used to make a TVout menu display,
or to display decoded album art. Can be connected to video D/A converter (see Note 7), or
connected to a video DSP.
JTAG
TMS,TCK,TDI, TDO
SSM
VIDEO
AV0CLK, AV0CTRL0,
AV0CTRL1,
AV0CTRL2,
AV0DATA0,
AV0DATA1,
AV0DATA2,
AV0DATA3,
AV1DATA0,
AV1DATA1,
AV1DATA2,
AV1DATA3
SMSC CX Module
23
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
GPIO (not already
mentioned elsewhere
in this table)
A22
GPIO18 Reserved for NOR flash address A22. Leave open.
A23
GPIO-16 Reserved for NOR flash address A23. Leave open.
NWAIT
I/O
GPIO-15 Not currently assigned. Leave open.
NCS2
GPIO-19 Assigned to iPod dock connector iPod NDETECT. See Note 8.
VCO1
I/O
GPIO-07 Not currently assigned. Leave open.
MIICRS
I/O
GPIO-00 Not currently assigned. Leave open.
MIICOL
I/O
GPIO-01 Not currently assigned. Leave open.
MIITXER
I/O
GPIO-02 Not currently assigned. Leave open.
MIITXCLK
I/O
GPIO-03 iPod dock connector Accessory Power signal. See Note 8.
I/O
Can be used, with GPIO signals above, to drive an external ethernet PHY. This is not
supported by JB2 firmware. Leave open.
Uses optional J1 LCD connector. Connect to local LCD display. See Note 9. Leave open if
not used.
MII
MIITXD0, MIITXD1,
MIIRXD0, MIIRXD1
LCD
LCDD0, LCDD1,
LCDD2, LCDD3,
LCDD4, LCDD5,
LCDD6, LCDD7,
LCDD8, LCDD9,
LCDD10, LCDD11,
LCDD12, LCDD13,
LCDD14, LCDD15,
LCD16, LCDD17,
LCDCLK, LCDCTRL0,
LCDCTRL1,
LCDCTRL2,
LCDCTRL3
SMSC CX Module
24
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Notes:
1. Signal type codes:
I – 3.3V level Digital Logic Input into the DM870A
O – 3.3V level Digital Logic Output from the DM870A
IO – 3.3V level Digital Logic Input and Output (bi-directional) signal
M – Miscellaneous, see text for description
P – Power Supply
2.
For SPI timing diagram for eDMP applications, please see:
BridgeCo_JB2x - DeviceControlProtocol_Registers_v_2_1.pdf, or later version.
For detailed setup and hold timing details, see DM870A IC data sheet:
DM870A DS rev. 1.3_12-15-11.pdf, or later version.
3.
For audio port timing diagrams, and for detailed setup and hold timing, please see DM870A IC data
sheet:
DM870A DS rev. 1.3_12-15-11.pdf, or later version.
4.
For example ethernet external schematic, see:
CX Module Ethernet (RJ45 + Ext.Magnetics)_V1.2.pdf, or later version.
This schematic is typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar
5.
For example USB schematics, see:
CX Module USB_V1.2.pdf, or later version.
This schematic is typically compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar
6.
For example use of extended GPIO shift registers, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version.
7.
For example connection to a video D/A converter, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version.
8.
iPod dock connector pin and GPIO assignments are under discussion. Please contact SMSC for
recommendations for iPod dock connections to CX870 module.
9.
For example connection to an LCD display, see CE2 schematic:
A EVMCE2-4_schematic.pdf, or later version.
10. All the above signals are brought out to J2 pins. Not all the above signals are brought out to J3, the
64-pin low density connector. The J3 pin assignments table shows which signals are brought out to
the J3 pins.
11. SMSC has a set of example motherboard schematics that shows example external circuitry that is
typically connected to the module. Please check the SMSC/BridgeCo customer portal at
https://portal.bridgeco.net/ for a copy of these example schematics. These schematics are typically
compressed into a zip file, for example:
CX Module_Interface Schematics_one_page_V1.2_Jun_11.rar
12. Please check the SMSC/BridgeCo Customer Portal Download area for the latest version of the
SMSC documents. Go to https://portal.bridgeco.net/. If you do not have an account, please contact
SMSC.
SMSC CX Module
25
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
8.2.2
Connector PIN Assignments
J2 – Media Connector
Function
D15
D14
B16
C13
B14
A14
B13
SPI
Debug UART
SPI_E_NCS
SPI_E_SDI
GPIO-11
GPIO-09
D12
B12
D11
A11
C10
D10
A1
B1
E3
USB
K4
L2
GPIO-16
GPIO-18
GPIO-14
GPIO-13
I2C SDA
I2C SCL
Video Output
LRCK
A/D data
A/D data
D/A data
D/A data
PIN Number
GPIO IC PIN Signal
H17
H16
T3
U2
M3
M2
L1
M4
N1
N2
N3
T1
P4
R3
T2
U1
GND
VIN (+3.3V)
VIN (+3.3V)
GND
VIN (+1.2V)
VIN (+1.2V)
GND
VIN (+1.9V)
GND
3V3RTC
GND
GND
SPI_DOUT
SPI_DIN
SPI_CLK
TXD0
RXD0
RXD1
TXD1
GND
SSMD7
SSMD5
SSMD3
SSMD0
SSMCLK
SSMCP
GND
USB_DN
USB_DP
USBVBUSDRV
GND
AOUTLP
AOUTLN
GND
A23
A22
AV3CTRL1
AV3CTRL0
AV0CTRL2
AV0CTRL1
AV0CLK
AV0DATA3
AV0DATA2
AV0DATA1
AV0DATA0
GND
AV2CTRL0
AV2DATA3
AV2DATA2
AV2DATA1
AV2DATA0
GND
ETH_RXN
ETH_RXP
Ethernet
GPIO-15
K18
ETH_TXN
ETH_TXP
GND
NWAIT
NPD_RF
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
101
103
105
107
109
111
113
115
117
119
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
102
104
106
108
110
112
114
116
118
120
Signal
GND
VIN (+3.3V)
VIN (+3.3V)
GND
VIN (+1.2V)
VIN (+1.2V)
GND
VIN (+1.9V)
GND
GND
TMS
TCK
TDI
TDO
SPI_NCS0
SPI_NCS1
NRESET_MOD
SSMD6
SSMD4
SSMD2
SSMD1
SSMCMD
SSMWP
NCS3
NCS2
GND
USB_VBUS
GND
AOUTRN
AOUTRP
GND
PDOUT1
VCO1
PDOUT0
VCO0
AV3CLK
AV0CTRL0
AV1DATA3
AV1DATA2
AV1DATA1
AV1DATA0
GND
AV2CTRL1
GND
AV2CLK
GND
AV4DATA1
AV4DATA0
GND
ETH_LED_ACT
ETH_LED_SPEED
MIICRS
MIICOL
MIITXER
MIITXCLK
MIITXD0
MIITXD1
MIIRXD0
MIIRXD1
GND
IC PIN GPIO Function
B15
C14
A16
A15
C15
B17
C12
A12
C11
B11
A13
D9
H18
J17
JTAG
SPI
Module reset input
GPIO-10 SPI_E_CLK
GPIO-08 SPI_E_SDO
GPIO-17 BIST activate
GPIO-19 iPod NDETECT
USB
D2
L3
L4
J1
J2
K1
K2
R4
M1
N4
P1
P2
P3
GPIO-06
GPIO-07
GPIO-04
GPIO-05
GPIO-12
SPI_REQ
Factory reset
IR input
ETH NRESET
Video Output
T1
MCLK
R1
SCLK
U3
V2
SPDIF output
SPDIF input
Ethernet
R14
T13
T11
R12
U10
V10
U12
V12
GPIO-00
GPIO-01
GPIO-02
GPIO-03 iPod Access Power
Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit.
This allows for easy cross-reference to the DM860A or DM870A data sheet information.
SMSC CX Module
26
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
J1 – LCD Connector
Function GPIO IC PIN Signal
LCD Interface
V8
T8
V7
T7
V6
T6
V5
T5
U4
LCD Interface
T10
T9
V9
GND
LCDD0
LCDD2
LCDD4
LCDD6
LCDD8
LCDD10
LCDD12
LCDD14
LCDD16
GND
LCDCLK
LCDCTRL1
LCDCTRL3
GND
PIN Number
11
13
15
17
19
21
23
25
27
29
10
12
14
16
18
20
22
24
26
28
30
Signal IC PIN GPIO Function
GND
LCDD1
LCDD3
LCDD5
LCDD7
LCDD9
LCDD11
LCDD13
LCDD15
LCDD17
GND
LCDCTRL0
LCDCTRL2
GND
GND
U8
R8
U7
R7
U6
R6
U5
V4
V3
LCD Interface
R9
U9
LCD Interface
Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit.
This allows for easy cross-reference to the DM860A or DM870A data sheet information.
J3 – Low Density Connector
Function
Free
iPod NDETECT
GPIO-15
GPIO-19
K18
J17
D13
Free
GPIO-17
D14
D15
B16
C15
H18
E-GPIO_NCS/TBA
I2C SDA
I2C SCL
GPIO-11
GPIO-14
GPIO-13
D12
T3
U2
SPI_REQ
Factory Reset
IR input
GPIO-06
GPIO-04
GPIO-05
J1
K1
K2
Ethernet
iPod Access Power GPIO-03
R12
SPI
Ethernet
Free
PIN Number
GPIO IC PIN Signal
GPIO-00
R14
GND
VIN (+3.3)
VIN (+3.3)
GND
VIN (+1.9)
VIN (+1.9)
GND
NWAIT
NCS2
NRESET
3V3RTC
GND
SPI_DIN
SPI_DOUT
SPI_CLK
SPI_NCS0
NCS3
GND
SSMD7
AV3CTRL1
AV3CTRL0
GND
PDOUT1
PDOUT0
VCO0
GND
ETH_LED_SPEED
MIITXCLK
ETH_RXN
ETH_TXN
MIICRS
GND
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
Signal
GND
RXD0
TXD0
GND
VIN (+1.2)
VIN (+1.2)
GND
RXD1
TXD1
GND
AV2CTRL1
AV2CTRL0
AV2CLK
AV2DATA2
AV2DATA0
AV4DATA1
AV4DATA0
GND
USB_DN
USB_DP
USBVBUSDRV
USB_VBUS
GND
SSMD5
SSMD4
GND
ETH_LED_ACT
SSMD6
ETH_RXP
ETH_TXP
MIICOL
GND
IC PIN GPIO Function
B14
C13
A14
B13
R2
T1
R1
R3
U1
T2
V2
A1
B1
E3
D2
Debug UART
MCLK
LRCK
SCLK
A/D data 0
D/A data 0
SPDIF output
SPDIF input
USB
B12
A12
GPIO-09 E-GPIO_SDI/TBA
GPIO-08 E-GPIO_SDO/TBA
C12
Ethernet
GPIO-10 E-GPIO_CLK/TBA
T13
GPIO-01 Free
Ethernet
Note: The IC PIN column indicates the pin number on the DM860A or DM870A integrated circuit.
This allows for easy cross-reference to the DM860A or DM870A data sheet information.
SMSC CX Module
27
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
8.2.3
GPIO Assignments
GPIO Assignments for J3 64-pin Low Density Connector
GPIO
PIN Name
PIN Number
Function
00
MIICRS
61
Free
01
MIICOL
62
Free
03
MIITXCLK
55
iPOD Access Power
04
PDOUT0
47
Factory Reset
05
VCO0
49
IR Input
06
PDOUT1
45
Host NIREQ
08
SSMD4
50
E_GPIO_SDO/TBA
09
SSMD5
48
E_GPIO_SDI/TBA
10
SSMD6
56
E_GPIO_CLK/TBA
11
SSMD7
37
E_GPIO_NCS/TBA
13
AV3CTRL0
41
I2C_SCL
14
AV3CTRL1
39
I2C_SDA
15
NWAIT
15
Free
17
NCS3
33
Free
19
NCS2
17
IPOD NDETECT
Note: Not all 20 GPIO signals are brought out to J3 64-pin low density connector. For the CX870-3K,
GPIOs 00, 01 and 03 are not brought out to J3 64-pin low density connector. J3 pin numbers 61, 62 and
55 are not connected to any signal in the CX870-3K module.
Application Guidelines
9.1
Power Supply sequencing and Reset Timing
There are strict power sequencing and reset timing requirements.
•
•
•
•
•
Power up the I/O voltage (3.3V) first and hold NRESET_MOD low.
The core voltage (1.2V) must never be higher than (I/O voltage +0.5 V).
The core voltage (1.2V) must be within the specified core voltage limits less than 300ms after the I/O voltage
(3.3V) reaches the specified I/O voltage limits.
Throughout the power down process, the 3.3V supply must maintain a higher voltage than the 1.2V supply,
until both have reached ground potential.
To assure a proper IC reset, the power supplies must be present for a minimum time of 2ms before
NRESET_MOD is de-asserted.
Please see the power and reset timing figure in Section 9.1.1 below.
About 1.9V, the arrival of 1.9V supply should lag behind the arrival of the 3.3V. The delay between the 1.9V and the
3.3V is not critical. Typical delay is approximately 10ms, for example using 10kohm resistor and 0.1uF capacitor on
the enable pin of a 1.9V dc-to-dc converter.
SMSC CX Module
28
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
9.1.1
Power up, Reset and Power Down Timing
Voltage
Power Up
Power Down
+3.3V
+1.2V
0V
< 300ms
NRESET_MOD
>= 2ms
Time
9.2
RF Considerations
Note that overall system, RF and WiFi performance is significantly affected by the product design, environment and
the application. It is the responsibility of the product designer to ensure proper system level shielding (if required) and
to verify performance and fitness for the given product features and applications.
The WiFi performance will be affected by the RF environment surrounding the CX module. Please ensure that the CX
module is positioned in a “quiet” RF environment, as far away as possible from high frequency clock signals and any
other sources of RF energy. Also, make sure the antenna is not shielded by any metal objects, for example
loudspeakers or other metal parts. Please make sure that the power supplies, in particular the +1.9V supply, are quiet
and free from noise.
SMSC recommends that systems implementing AirPlay should use a module configuration that includes on-module
shielding, as well as paying particular attention to system configuration and shielding. In particular, SMSC is
recommending the use of the Bottom Shield versions of the modules, which allows greater freedom in antenna
positioning.
Also, please see the SMSC Application Note:
SMSCAppNote - CX870_Antenna_Placement_V1_4.pdf
regarding antenna positioning guidelines.
Please see below picture for the recommended keep out area and cable routing for the antennas.
SMSC CX Module
29
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
10 Revision Control
Revision
Date / Author
Details of Change
Reason for Change
V2.8
(093012)
Sept 30, 2012
/ SHs
Updated Section 4 Ordering Guide with 2 new
rows for CX870-3LB & CX870-3MB and moved
the row for CX870-3KB to be with them.
New SKUs available.
V2.8
(092412)
Sept 24, 2012
/ SHs
Updated cover page with new Microchip logo;
removed SMSC logo from header; removed
SMSC logo & address from legal text (page 2);
added info about Microchip to legal text;
updated © to 2012.
Microchip purchased SMSC.
Updated filename to ‘CX_Module_DS_Rev28_MM-DD-YY.pdf’.
Data covers all CX modules.
Removed CX860 from Section 7.4 Module
Weight.
No CX860 module available.
Updated left side of footer to ‘SMSC CX
Module’.
Data sheet is for all CX modules.
Updated title of Section 7.1.1 to ‘Top & Bottom
View of CX Module with Bottom Shield’.
Drawings are for all CX modules.
Updated title of Section 7.2.1 to ‘Side View of
CX Module with Bottom Shield except CX8703JB’.
Drawings are for all CX modules.
In Sections 3.1, 3.2, 3.2.1 & 3.2.2, updated
occurrences of ‘CX870’ to ‘CX Module’.
Pictures are for all CX modules.
Updated Section 4 Ordering Guide to remove
rows for CX870-3DB and CX870-3DBS, and
add a row for CX870-3KB.
Updated to show actual status.
Removed ‘I2C’ box, arrow & label in Section 2
Block Diagram.
Correction.
Updated Section 2 Block Diagram to show
obscured black lines leading out from LCD &
SSM blocks.
Correction.
In Section 2 Block Diagram changed “DM860A
or DM870A” to “DM870A or DM875”
CX module uses DM870A and DM875.
In Section 1 Introduction, changed “DM860A
and DM870A” to “DM870A and DM875”
CX module uses DM870A and DM875.
In Section 4 Ordering Guide, added a ‘Status’
column and status code key.
To show current availability status of each
module version.
In Section 4 Ordering Guide, added row for
CX875-3PB.
To give details of newly available module
version.
In Section 4 Ordering Guide, changed “SMSC
IC’s” heading to “SMSC ICs”.
Correction.
In Section 6.0.1 Antenna Considerations,
replaced text list with a new table.
Updated information and in a clearer format.
Added a new section 6.0.2 CX Power Settings
Used For Modular Approval.
To provide more details about CX module
power settings.
In Section 6 Regulatory Compliance and
Quality, updated the Compliance entry for New
Zealand / Australia for Radio Regulations from
“CE” to “AZ/NZS:4268”
Updated information.
In Section 9.2 RF Considerations, changed the
application note file path from “App Note
Antenna Placement recommendation CX870
modules rev1.1.pdf” to “SMSCAppNote CX870_Antenna_Placement_V1_4.pdf”
Provide most up to date Application Note file.
V2.8
(090912)
Sept 9, 2012 /
SHs
SMSC CX Module
30
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
Date / Author
Details of Change
Reason for Change
In Section 9.2 RF Considerations, added note &
picture regarding recommended keep out area
and cable routing for antennas.
Provide information about keep out areas and
cable routing.
In Notes of Section 8.2.1 Pin Descriptions,
added text regarding schematics being
compressed into zip files to Notes 4, 5 & 11.
Provide further information about schematic
files.
V2.7
(061312)
June 13,
2012 / SHs
In Section 4 Ordering Guide, made rows for
CX870-3B, 3H, 3I, 3J shaded.
All new designs should use modules with a
bottom shield, so modules without a bottom
shield are now marked as "NOT TO BE USED
FOR NEW/STANDARD MP DESIGNS" by
shading the rows in the Ordering Guide table for
those modules with no bottom shield.
V2.6
(050812)
May 8, 2012 /
SHs
Removed entries in ‘8MByte NOR’ column for
modules 3A, 3B, 3D, 3DS in Section 4 Ordering
Guide
Correction.
V2.5
(042212)
April 22, 2012
/ SHs
Updated title of Section 7.2.1 Side View of
CX870 Module with Bottom Shield to include
“…except CX870-3JB”
Reflect addition of separate section (7.2.2) for
the CX870-3JB module.
Added Section 7.2.2 Side View of CX870
Module with Bottom Shield part number CX8703JB only
CX870-3JB has thinner bottom shield than other
modules.
Added IC PIN entry for MIICRS in J3 Low
Density Connector table in Section 8.2.2
Connector PIN Assignments.
CX module uses DM870A.
Changed "MMIICRS" to "MIICRS" in Section
8.2.3 GPIO Assignments.
Correction.
Changed "MMIICRS" to "MIICRS" in J3 Low
Density Connector table in Section 8.2.2
Connector PIN Assignments.
Correction.
Changed "MMIICRS" to "MIICRS" in GPIO table
in Section 8.2.1 Pin Descriptions.
Correction.
Added important note text to Tx Power row in
Section 5.3 WiFi Specification.
To indicate which modules the Tx Power
specifications relate to.
Removed the ‘m’ from "+/-1dBm" in the Tx
Power row in Section 5.3 WiFi Specification.
Correction.
In Section 5.3 WiFi Specifications, updated
Transmission Speed entry
Add missing 2Mbps speed.
In Section 4 Ordering Guide, changed all
occurrences of DM870 to DM870A & DM860 to
DM860A
CX module uses DM870A.
In Section 2 Block Diagram, changed all
occurrences of DM870 to DM870A & DM860 to
DM860A
CX module uses DM870A.
In Section 1 Introduction, changed all
occurrences of DM870 to DM870A & DM860 to
DM860A
CX module uses DM870A.
In Section 8.2.1 Pin Descriptions, changed all
occurrences of DM870 to DM870A
CX module uses DM870A.
In the Notes for Section 8.2.1 Pin Descriptions,
changed dat_DM870_16_datasheet.pdf to
DM870A DS rev. 1.3_12-15-11.pdf
CX module uses DM870A.
Changed all occurrences of DM870 to DM870A
throughout the datasheet.
CX module uses DM870A.
Updated J1, J2 & J3 tables in Section 8.2.2
Connector PIN Assignments, changing DM870
to DM870A.
CX module uses DM870A.
V2.4
(032312)
V2.4
(031712)
March 23,
2012 / SHs
March 17,
2012 / SHs
SMSC CX Module
31
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
V2.4
(031212)
V2.4
(031012)
Date / Author
March 12,
2012 / SHs
March 10,
2012 / SHs
Details of Change
Reason for Change
Changed "WiFi (on-module PCB diversity)"
column heading to "Internal PCB Diversity
Antennas" in Section 4 Ordering Guide
Improve clarity of meaning.
Added ‘FCC’ to North America in Frequency
Band entry in Section 5.3 WiFi Specification
Specify North American WiFi regulatory
certification body.
Updated TX EVM entry in Section 5.3 WiFi
Specifications
Update values to better reflect actual
performance.
Updated Rx Sensitivity entry in Section 5.3 WiFi
Specifications
Update values to better reflect actual
performance.
Updated Tx Power entry in Section 5.3 WiFi
Specifications
Show test conditions.
Added Section 3.6 Production Module with
Bottom shield (Part Numbers with a "B" after the
configuration letter)
Show module versions with bottom shield.
Added Section 3.6.1 Including J3 Low Density
64-pin connector - Bottom View
Show bottom shield.
Added Section 3.6.2 Including J2 High Density
120-pin connector - Bottom View
Show bottom shield.
Updated Section 4 Ordering Guide & Section
4.1 Part Number Syntax drawing with bottom
shield versions
Bottom shield versions added to table and
Syntax drawing.
Added another note to Section 8.2.3 GPIO
Assignments
Document missing GPIOs for CX870-3K.
Updated TX Power row in Section 5.3 WiFi
Specification (CX870 only)
Show improved tolerances for TX power.
Added Section 7.1.1 Top & Bottom View of
CX870 Module with Bottom Shield
Show drawings of module with Bottom Shield.
Added Section 7.2.1 Side View of CX870
Module with Bottom Shield
Show drawings of module with Bottom Shield.
Added a note to Section 7.3 3D View of CX870
Module
To indicate availability of digital copy of 3D view
of module.
Added additional text to Section 9.2 RF
Considerations
Providing further recommendations regarding
the use of bottom shield versions and to indicate
the availability of a pdf about antenna
positioning guidelines.
V2.3
(112011)
November 20,
2011 / SHs
Added CX870-3DS option to Section 4 Ordering
Guide
To indicate soldered shield version.
V2.2
(110811)
November 8,
2011 / SHs
Added CX870-3K option to Section 4 Ordering
Guide.
Added -3K option.
V2.1
(100711)
October 7,
2011 / SHs
Updated title of Section 6.1 from “1 RoHS” to
“RoHS”.
Correcting typo.
In Section 10 Revision Control table, updated
an entry for V2.0 b in the Reason for Change
column from “RTV” to “RTC”
Correcting typo.
Removed “Preliminary Datasheet” from the
footer.
CX module is in production, so the datasheet is
no longer preliminary.
Removed the word “Preliminary” from the title
page.
CX module is in production, so the datasheet is
no longer preliminary.
Updated Section 5.3 WiFi Specification “TX
Power” entry for 802.11g
Correspond to actual production test limits.
Updated Section 6.0.1 Antenna Considerations
with updated module numbering scheme
Revert to original module numbering scheme.
Updated Section 6.7 Module Quality with new
Defect Rate
Data is now available.
V2.0
(100211)
October 2,
2011 / SHs
SMSC CX Module
32
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
V2.0
(092611)
V2.0 c
Date / Author
Sept. 26,
2011 / SHs
Sept. 14,
2011 / SHs
SMSC CX Module
Details of Change
Reason for Change
Updated Section 4.1 Part Number Syntax with
removal of Antenna Configuration number and
Note
Revert to original part numbering scheme.
Updated Section 10 Revision Control with new
Reason for Change column
Corporate standard.
Change from BridgeCo logos and disclaimer
text to SMSC logos and disclaimer text
Corporate standard.
Updated location of red boxes in Section 3.2.1
CX870 Bottom View with 64-pin Low density
connector
Improve alignment of red box to photo.
Updated location of red boxes in Section 3.2.2
CX870 Bottom View with 120-pin Media
connector
Improve alignment of red box to photo.
Moved Section 5.3 WiFi Specification on to one
page
Improve readability.
Updated Customer Portal information in Section
6 Regulatory Compliance and Quality
Easier to access URL directly.
Reverted Antenna Considerations back to
Section 6.0.1; subsequently all subsections in
Section 6 reverted back to original numbering
Decided to keep original part numbering
scheme to avoid unnecessary paper work and
the need to redo certifications.
Updated Notes 11 & 12 in Section 8.2.1 Pin
Descriptions with updated Customer Portal
information
Easier to access URL directly.
Updated Table of Contents
Keep TOC aligned with actual content.
Updated font styling of Table of Contents
Easier to read.
Update Section 2 Block Diagram : moved
RJ45+Transformer & USB Type A boxes inside
the drawing boundary
Improve accuracy of drawing.
Updated Section 5.3 WiFi Specification (CX870
only) TX Power Description entry
Align data with test limits.
Updated Section 5.3 WiFi Specification (CX870
only) Rx Sensitivity Description entry
Align data with test limits.
Updated Section 5.3 WiFi Specification (CX870
only) : add a Note underneath the table
Clarification of the possible effect of changing
the TX Power setting.
Updated Section 4 Ordering Guide : changed
CX870-3D row Two Ant entry from (X)* to X
Change to match final CX870-3D configuration.
Updated Section 4 Ordering Guide : removed
the two blank rows
Improve readability.
33
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
Date / Author
Details of Change
Reason for Change
V2.0 b
Sept. 10,
2011 / SHs
Updated the Description for pin NCS3 in Section
8.2.1 Pin Descriptions
Update to align with actual use.
Updated Section 4 Ordering Guide : added gray
background to CX870-3F & CX870-3G
Internal antenna versions are not available until
performance issues are resolved.
Updated Section 4 Ordering Guide : removed
the 2 from A, H, I & J version Part Numbers
Decided to keep original part numbering
scheme to avoid unnecessary paper work and
the need to redo certifications.
Updated Section 4 Ordering Guide : split Ext.
Diversity Antennas column into two, added two
sub-columns “One Ant.” & “Two Ant.”, moved Xs
to correspond with correct sub-column
Show the number of external antenna
connections.
Updated Section 4 Ordering Guide : CX870-3D :
removed X from WiFi column
CX870-3D is not configured for internal
antenna.
Updated Section 4 Ordering Guide : updated +
Note text
Explained about one or two external antenna
options.
Updated Section 4 Ordering Guide : moved the
+ from Part Numbers column to Ext. Diversity
Antennas column
Proper link for "+" Note.
Updated Section 4 Ordering Guide : removed #
Note completely
Content now covered by "+" Note
Updated Section 4.1 Part Number Syntax :
Updated graphic
Explain antenna configuration field
Updated Section 4.1 Part Number Syntax :
Updated Note text
Explain about one or two antenna configuration.
Updated text in Section 8.1 WLAN UFL Antenna
Connector
Remove references to part numbering scheme
which includes the number of antennas, and
repeat advice to use two external antennas.
Removed RTC elements from Section 2 Block
Diagram
Support for RTC is removed.
Updated the Description for pin 3V3RTC in
Section 8.2.1 Pin Descriptions
Support for RTC is removed.
V2.0 a
August 22,
2011 / SHs
Added Section 3.5 Example Production Module
Showing Soldered RF Shield
Photo shows that RF shield is soldered, needed
for Japan Telec certification.
V2.0
August 12,
2011 / SHs
Updated Note Section 4.1 Part number syntax
Highlighted that CX870-3D does not follow the
new part numbering scheme. This Note was
subsequently deleted, so this is not relevant any
more.
Updated all Section 3 Board Pictures to new
versions + inserted new Sections 3.2.1 & 3.2.2
which show two different bottom views
Improve accuracy of data sheet photos.
V1.9 c
August 2,
2011 / SHs
•
•
V1.9 b
July 28, 2011
/ SHs
•
•
•
SMSC CX Module
Updated Key Features on Title page:
removed (optional) from “WiFi-certified
802.11b/g” entry
Updated Antenna Configuration entry in
Section 4.1 Part number syntax
Updated Section 4.1 Part number syntax
Updated graphic
Added a Note
Changed intro text in Section 3 Board
Pictures
Updated Section 4 Ordering Guide
Changed CX870-3B1 to CX8703B
Updated the text for + note
Added a note to CX870-3B Ext.
Diversity Antenna column
Added a new # note
34
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
V1.9 a
Date / Author
July 25, 2011
/ SHs
Details of Change
Added Section 6.0.1 Antenna
Considerations
•
Inserted new photo for Section 3.1 Top
View of CX870
Inserted new photo for Section 3.2 Bottom
View of CX870
Added new Section 3.3 Production Module
with Top & RF shields
Added new Section 3.4 Production Module
with 64-pin Connector Option
Updated Section 4 Ordering Guide
Added gray background to
CX870-3D
Changed CX870-3A to CX8703A2
Changed CX870-3B to CX8703B1
Changed CX870-3H to CX8703H2
Changed CX870-3I to CX8703I2
Changed CX870-3J to CX8703J2
Added a Note to the Part
Number title
Updated Section 8.1 WLAN UFL Antenna
Connector with new text
Updated Section 5.3 WiFi Specification TX
EVM entry to
-9dB@6MHz
Updated Section 6 Regulatory Compliance
& Quality with Module Versions Passed for
Radio Regulations entries
Replaced the Note in Section 6 to be main
body text and updated the text.
Added new Section 4.1 Part number
syntax
Updated module weight to 20g
•
•
•
•
•
•
•
•
•
•
V1.8 a
July 10, 2011
/ SHs
•
•
V1.8
July 5, 2011 /
SHs
•
•
V1.7 c
May 13, 2011
/ SHs
•
•
•
•
V1.7 b
May 11, 2011
/ SHs
•
•
•
•
SMSC CX Module
Reason for Change
•
Update section 8.1 WLAN UFL Antenna
Connector
Deleted section 8.1.1 Coaxial antenna
connector dimensions
Updated the acceptable surface-mount
receptacle parts in Section 8.1 WLAN UFL
Antenna Connector
Added Appendix 1: Certification Notices
Updated “Module Quality” Defect Rate
field entry
Updated “Board Dimensions & Weight”
drawings
Updated the “Electrical Specifications”
table
Added another Note to the “Pin
Descriptions” section
Updated Note 8 in “Pin Descriptions” table
Re-imported “Board Dimensions &
Weight” drawings
Updated “Board Pictures” images
Updated board photo on Cover page
35
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
Date / Author
Details of Change
•
•
•
•
•
V1.7 a
May 6, 2011 /
SHs
•
•
•
•
•
V1.7
May 4, 2011 /
SHs
•
•
•
•
•
•
•
•
•
•
•
•
Reason for Change
Updated the Feature list on Cover page
Updated J1, J2 & J3 “Connector PIN
Assignments” tables: removed Power
column & re-organised columns
Changed “Application Notes” title to
“Application Guidelines”
Updated Copyright date to “2011”
Updated Table of Contents font styling
Re-imported Block Diagram as a wmf file
Updated “Power up, Reset & Power down
Timing” figure
Updated “Pin Descriptions” table
Re-organised text in “Power Supply
sequencing & Reset Timing”
Re-imported J2 & J3 Connector PIN
Assignment tables
Added note to Module Weight section
Updated the Ordering Guide – Part
Numbers & added new J version
Added new text to the Board Pictures
section
Updated all Mechanical Drawings and
added & removed Notes
Updated the J3 Low Density Connector
table
Updated the GPIO Assignment table
Added new Power Supply & Timing figure
Updated the text in the “Power Supply
sequencing and Reset Timing” section
Updated the Key Connections table
Updated “Key Connections” section title to
“Pin Descriptions”
Updated “Detailed Connector PIN
Descriptions” section title to “Connector
PIN Assignments”
Updated J2 Media Connector table
V1.6 d
March 3,
2011 / SHs
•
•
Updated J3 Low Density Connector table
Update GPIO Assignments section and
table
V1.6 c
February 24,
2011 / SHs
•
Updated all mechanical drawings in
“Board Dimensions and Weights” section
Deleted warning note in “Board
Dimensions and Weights” section
•
V1.6 b
February 23,
2011 / SHs
•
•
V1.6
February 11,
2011 / SHs
•
•
•
•
Updated “J3-Low density connector” pin
description table
Updated “GPIO Assignments” table
Entirely updated the “Ordering Guide”
Added a Note to the “Ordering Guide”
Updated the subsection titles for the
“Board Pictures” section
Updated the Block Diagram – changed
‘WiFi Antenna’ to ‘Ext. Antenna’
V1.5 b
January 27,
2011 / SHs
•
Added Note to “Board Dimensions and
Weight” section
V1.5 a
January 24,
2011 / SHs
•
Updated the “Ordering Guide” – removed
Mfg column and consolidated into one
table
SMSC CX Module
36
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
V1.5
Date / Author
January 22,
2011 / SHs
Details of Change
Reason for Change
•
Updated the Header to reflect Preliminary
nature of datasheet
•
Updated the datasheet to be a Preliminary
Datasheet
Added new feature to Summary on Front
Page
Updated “J3 - Low Density Connector”
table
Updated “GPIO Assignments” table
Added note to “Board Dimensions &
Weight – Side Views of CX870 module”
section
Updated text in “Application Notes –
Power Supply Sequencing & Reset
Timing” section
Updated “Block Diagram”
Updated text in “Connectors &
Connections – WLAN UFL Antenna
Connector” section
•
•
•
•
•
•
•
V1.4 b
January 11,
2011 / SHs
•
Updated the Application Notes, RF
Considerations section
V1.4
January 3,
2011 / SHs
•
Updated the module photo on the Title
page
Updated the Application Notes, RF
Considerations section
•
V1.3
December 23,
2010 / SHs
•
•
•
•
•
•
•
•
•
•
V1.2
December 19,
2010 / SHs
V1.1
December 13,
2010 / SHs
•
•
•
•
•
•
•
•
•
•
•
•
•
SMSC CX Module
Updated Ordering Guide
Added Notes to Ordering Guide
Updated Block Diagram
Updated “J3 – Low Density Connector”
table
Updated “Electrical Specifications” table
Added Power Consumption data to
“Electrical Specifications” table
Updated the Board Dimensions and
Weight images
Updated the “GPIO Assignments” table
Added another Application Note
Added titles to Application Notes
Inserted CX860 and CX870 Module
Weights
Updated module image on Front Page
Added the Ordering Guide.
Updated the Block Diagram.
Updated the “Electrical Specifications”
table
Updated the “Absolute Maximum Ratings”
table
Updated the Notes for “Regulatory
Compliance and Quality” section
Updated “Key Connections” table
Updated “J2 – Media Connector” table
Updated “J3 – Low Density Connector”
table
Updated “GPIO Assignments” table
Added Board Pictures
Replaced Mechanical Drawings in “Board
Dimensions and Weight” section
37
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Revision
Date / Author
V1.0
October 18,
2010 / SHs
SMSC CX Module
Details of Change
•
Reason for Change
Initial Version
38
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
11 Appendix 1: Certification Notices
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/ TV technician for help.
•
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
Labeling requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide
with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Information for the OEMs and Integrators
The following statement must be included with all versions of this document supplied to an OEM or integrator, but
should not be distributed to the end user.
This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other
restrictions. This device must be operated and used with a locally approved access point.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the
product or system incorporating an adapter in compliance with local regulations.
Host system must be labeled with "Contains FCC ID:ZQO-CX870-3”X”“, FCC ID displayed on the label. The label text
should be updated according to the table shown in Ordering Guide section of this document. The proper letter shown
in Ordering Guide Part Number column should be substituted for “X”. For example, for the CX870-3B module, the
label text should be “Contains FCC ID:ZQO-CX870-3B“.
SMSC CX Module
39
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)
JukeBlox Networked Media Modules – CX Series
Datasheet
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits.
The Wireless Device should be used in such a manner such that the potential for human contact during normal
operation is minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure
conditions. (antennas are greater than 20cm from a person's body).
This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio Equipment
List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et
(2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil Dell est inférieure à la limite d'exposition aux fréquences radio
d'Industry Canada (IC). Utilisez l’appareil de sans fil Dell de façon à minimiser les contacts humains lors du
fonctionnement normal.
Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des
conditions d'exposition à des appareils mobiles (les antennes se situent à moins de 20 cm du corps d'une personne).
Ce périphérique est homologué pour l'utilisation au Canada. Pour consulter l'entrée correspondant à l’appareil dans
la liste d'équipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Pour des informations supplémentaires concernant l'exposition aux RF au Canada rendez-vous sur:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
SMSC CX Module
40
SMSC CONFIDENTIAL
Revision 2.8 (09-30-12)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 40
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:90b60e6e-d29b-422a-a2e8-e22ddddcb10d
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2012:12:18 16:27:39+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:12:18 16:28:53+08:00
Metadata Date                   : 2012:12:18 16:28:53+08:00
Document ID                     : uuid:7b85d2fe-f88c-4ded-b88f-e1dc16f73264
Format                          : application/pdf
Creator                         : Seven-F3
Title                           : Microsoft Word - _CX870-3LB_ UserMan_20121218.doc
Author                          : Seven-F3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PPQ-CX8703LB

Navigation menu