LITE ON TECHNOLOGY KB27RF003 27MHZ WIRELESS KEYBOARD User Manual

Lite-on Technology Corp. 27MHZ WIRELESS KEYBOARD

USERS MANUAL

LITE-ON Technology Department: HIS R&D User’s Manual For Model : SK-7360 RF Wireless Keyboard Prepared :Muchuan Lee Version: 1.0 Department: HIS, R&D Date: May. 22-2004
LITE-ON Technology Department: HIS R&D Table of Contents 1. GENERAL MAIN FEATURE:............................................................................................................1 SOFTWARE REQUIREMENT.............................................................................................1 2. MECHANICAL ID.......................................................................................................................... KEYBOARD/RECEIVER ......................................................................................................4 3. ELECTRICAL FEATURE 3.1 KEYBOARD TRANSMITTER ......................................................................................................3 3.1.1 Operating voltage ....................................................................................................................................................3 3.1.2 Current consumption................................................................................................................................................3 3.1.3 Power consumption..................................................................................................................................................3 3.1.4 Low Power Indicator................................................................................................................................................3 3.1.5 Circuitry...................................................................................................................................................................4 3.1. PCB Assembly ..................................................................................................................................................4 3.1.6 Effective Transmission Distance..............................................................................................................................4 3.2 RECEIVER.......................................................................................................................5 3.2.1 Operating voltage ....................................................................................................................................................5 3.2.2 Current consumption................................................................................................................................................5 3.2.3 Power consumption..................................................................................................................................................5 3.2.4 Pin outs of PS2 min-DIN connector.........................................................................................................................4 3.2.6 Circuitry...................................................................................................................................................................4 3.2.7.1 PCB Assembly.............................................................................................................................................5 3.2.7.2 Cable ...........................................................................................................................................................5 3.3 FUNCTION DESCRIPTION................................................................................................5 3.3.1 Interface specification with host PC ........................................................................................................................5 3.3.2. Channel and ID default setting................................................................................................................................6 3.3.3 Channel and ID numbers .........................................................................................................................................6
SK-8810 RF WIRELESS KEYBOARD Page No: 1 of 27 1. General SK-7260 is a 27 MHZ RF keyboard set, the product is composed of a wireless desk top PC keyboard and a PS2 receiver. The keyboard includes Standard function keys and several (option) easy access keys. General the receiver supports both keyboard and mouse function. There are only described keyboard and receiver functionality in the product specification but excluded mouse specification. The product package includes wireless keyboard and receiver, mouse device is optional according to customer’s demend. 1.1 Main feature The product provides 2 channels /256 ID operation to prevent frequency interference. The receiver interface of supporting both keyboard and mouse to the system through PS2 ports. .  Single chip keyboard & Receiver controller.  Phantom key detection.  Low power consumption .  4k bps baud rate in air.  Provides 2 RF channels .  256 ID codes randomly generated to resist interference.  EEPROM interface for ID keeping  Low battery detector function for transmitter. 1.2 Software requirement The keyboard, receiver and drivers are compatible with operating systems that are WIN98, Windows Millennium and Windows 2000. The driver-application also must meet all current and future Microsoft WHQL requirements.
SK-8810 RF WIRELESS KEYBOARD Page No: 2 of 27 2. Mechanical ID Keyboard: Receiver :
SK-8810 RF WIRELESS KEYBOARD Page No: 3 of 27 3. Electrical Specification Functional Block diagram: Microprocessor MA6231 3.1 Keyboard Transmitter Operating voltage The operating voltage range for keyboard is 2 ~ 3.3 Vdc. There are 2 AA batteries providing 3.0V for operation f Current consumption Typical current consumption is 8 mA, .Maximum at 10 mA Suspend current is about 80 uA. Power consumption The power consumption is less than 0.024 W at operation mode and 240 uW at sleep mode. Low Power Indicator Low power indicator on the keyboard will be lit during hitting key when the battery voltage in the keyboard transmitter is less than about 2V. CPU Crystal : 32.768KHz RF Link PC Host PS2 Interface cable Low power indicator NumL ,CAP, Scrol LED Data indicator Keyboard (Base-Band) CPU Crystal : 32.768KHzTX-Freq : 27.145 MHzRX-Freq : Crystal : 26.690 /26.590 MHzBase-Band Microprocessor MA6135
SK-8810 RF WIRELESS KEYBOARD Page No: 4 of 27 3.1.1 Circuitry PCB Assembly Microprocessor MA6231 , MosArt ‘s Chip is applied. It’s placed on the PCB main board. There is also an antenna connected to this PCB for transmitting RF signal. 3.1.2 Battery Life The battery life under the operating condition of 10 keystrokes/sec continuous use is 80 hours for alkaline type and 30 hours for Zinc-Carbon type. 3.1.3 Effective Transmission Distance Effective transmission distance is 2 meters. 3.1.4 Features of keyboard  This model contains easy access keys, including web. and multimedia keys .  There is one LED on the keyboard for battery low power indication.  .It has a standard keyboard function with the language layout of US English version.  Two AA batteries are to be installed at the bottom of the keyboard for operation.  There is a channel selection button at the bottom side of keyboard .  Single chip solution , imbedded DC-to-DC converter to prevent malfunction of low battery power ,integrated RF components especially optimized for 27 MHz RF keyboard transmitter  32.768kHz main clock to reach a quite low power consumption. Easy Acess Key Code Table Win2000 compatible, they are include,refer to table below: PS/2 Hot key No. Usage Name / Key Name Set1 Make Set1 Break Set2 Make Set2 Break 1 Scan Next Track E0 19 E0 99 E0 4D E0 F0 4D 2 Scan Previous Track E0 10 E0 90 E0 15 E0 F0 15 3 Stop E0 24 E0 A4 E0 3B E0 F0 3B 4 Play / Pause E0 22 E0 A2 E0 34 E0 F0 34 5 Mute E0 20 E0 A0 E0 23 E0 F0 23 6 Volume Increment E0 30 E0 B0 E0 32 E0 F0 32 7 Volume Decrement E0 2E E0 AE E0 21 E0 F0 21 8 EMail Reader E0 6C E0 EC E0 48 E0 F0 48
SK-8810 RF WIRELESS KEYBOARD Page No: 5 of 27 9 WWW Home E0 32 E0 B2 E0 3A E0 F0 3A 10 WWW Back E0 6A E0 EA E0 38 E0 F0 38 11 WWW Forward E0 69 E0 E9 E0 30 E0 F0 30 12 WWW Favorites E0 66 E0 E6 E0 18 E0 F0 18 13 WWW Search E0 65 E0 E5 E0 10 E0 F0 10 14 WWW Refresh E0 67 E0 E7 E0 20 E0 F0 20 *These controls are currently supported in Windows Me only. 3.2 Receiver 3.2.1 Operating voltage Voltage supplied to keyboard: 5+/-0.25 VDC With ripple lower than 150mv, and capable of supply load current up to 100 mA with voltage drop less than 0.25 VDC Current consumption Under nominal 5 VDC power supplied, typical current operating is 10 mA and 15 mA at maximum. Power consumption Under normal operation, the power consumption of total unit will be less than 3.2.2 Circuitry PCB Include a MosArt’s microprocessor MA6135 (Keyboard + Mouse ) as a base band controller , two 3361 IF chips for RF receiving function and a EEPROM 93C46 for ID memory. There are put on to a double side PCB. Cable connector : 6 pin PS2 min-DIN connector compatible with IBM PS2 spec.. LED indicators There are four indicators(green) on the receiver included NumLock ,CapLock,ScroLock and Receiving Data LEDs. The data indicator will be ON only when data is receiving from the transmitter. 3.3 Function description 3.3.1 Interface specification with host PC
SK-8810 RF WIRELESS KEYBOARD Page No: 6 of 27 The keyboard Receiver uses IBM PS2 interface to PC host in data communication between them. 3.3.2 Operation Battery Installation Installs two AA batteries to transmitter and connected the receiver with PC system, it’s ready for connection procedure. Connection (ID Pairing) procedure Procedure by steps Step-1:Pressing channel button on the transmitter one time first , Step-2: Right away to press the channel button on the receiver at second and they Should be in connection between, Step-3: Then go to the normal operate. Note: preset in the production line as default setting before delivery ID change : Same as the the procedure of “connection procedure”. Channel and ID numbers Channel: two channels including CH1 for keyboard(27.145mHZ) and CH2 For mouse (27.045mHz) ID: There has a randomly 256 ID from for selection. Note: The ID indication is to prevent from interfering each other. End of SK-7360 User’s Manual
FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Note: This device and its antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu