LITE ON TECHNOLOGY MS27RF003 Wireless Mouse User Manual

Lite-on Technology Corp. Wireless Mouse

User manual

Download: LITE ON TECHNOLOGY MS27RF003 Wireless Mouse User Manual
Mirror Download [FCC.gov]LITE ON TECHNOLOGY MS27RF003 Wireless Mouse User Manual
Document ID838825
Application IDsVREVFUq61R+UXBT9uoB7Q==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.56kB (32029 bits)
Date Submitted2007-09-05 00:00:00
Date Available2007-09-05 00:00:00
Creation Date2007-08-27 09:19:21
Producing SoftwarepdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod2007-08-30 18:29:53
Document TitleSK-7225_USER MANUAL_刪掉方塊圖_.doc
Document CreatorpdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author: BETTY

USER MANUAL
Model:
SK-7225
Version :
0.1
Issue Date:
2007.8.6
General
The SK-7225(K) series RF keyboard is a high quality wireless 27
MHz radio product set, supports 65,536 ID numbers. The product has
high radio performance with minimum operation range of 2 meter for
keyboard. It also offers low power consumption for operation. Keyboard
function includes standard keyboard function and WIN2000 hot key
function. . It need a USB RF receiver would be used as a communication
bridge, it transmits the demodulation data to PC by USB interface.
The SK-7225(M) series RF mouse is a high quality wireless 27 MHZ
radio mouse set, supports 65,536 ID numbers. The mouse product has
high radio performance with minimum operation range of 1.3 meters at
least. It also offers low power consumption for operation. The high
quality performance of mouse function includes pointing, left/right button
and wheel function (totally 3 button). It need a USB RF receiver would be
used as a communication bridge, it will transmit the demodulation data to PC
by USB interface.
The SK-7225(R) series radio receiver is a high quality 27 MHz key
board/mouse receiver, supports 2 channels and 65,536 channel ID numbers.
The TI RF chip TRF7905 employs to the product and offers low power
consumption. The product has high radio performance with maximum
operation range of 2 meters for keyboard. The product supports HID input
device to receive data from keyboard and mouse. It is a USB receiver to be
used as a communication interface device between PC computer and
wireless device.
Main Feature
Keyboard
l Single RF channels 27.195MHZ for keyboard.
l Total 65,536 ID numbers.
l Maximum 2k transmission baud rate.
Wireless operating distance up to 2.0 m
l The product offers hot key function for WIN2000 as well as supports
standard keyboard functions.
l Low power consumption design/Low battery indicated function
l Product Applications: Laptop PC, Desktop PC
l Operate OS: window 2000/ME/XP/MAC/LINUX OS
Mouse
l 800cpi
l
3D mouse (3 keys and wheel)
Single RF channels 27.045MHZ for mouse.
Offer 65,536 ID numbers.
Maximum 3.3k transmission baud rate for mouse.
Operating distance up to 1.3m.
Low power consumption indicated function
Battery: AA*2 PCs
Low Cost – eliminate need external components.
Operation Voltage 1.8V ~ 3.3V.
Support power down Mode and high efficiency power amplifier
Battery Life: Mouse 50 Working hours (3 months )by continue operation
( TWO AA ALKALINE BATTERY)
l Product Applications: Laptop PC, Desktop PC.
l Operate OS: window 2000/ME/XP/MAC/LINUX OS
Receiver
l Two channels, one for keyboard and one for Mouse.
65,536 ID for radio communication.
Maximum 3.3k transmission baud rate.
High radio sensitivity -90 dBm.
Low Speed USB Specification Compliance.
l Meets Universal Serial Bus Specification Version 1.1
l Support USB Sleep Mode.
l Low Cost – eliminate need external components
Operation procedure
The product needs to make pairing with USB receiver before normal application
In general we can use the product directly by the user because the pairing process has
been done at manufacturer site. However, the pairing process needs to be done if there
is no response from mouse.
* How to make pairing (step by step as below process) by user:
1. Insert two batteries to the RF keyboard or mouse, and close the battery door.
2. Plug in the Receiver to the USB port of P.C. and the Access LED will to flash about 2
seconds.
3. Press the ID connect button of Receiver and the Access LED will to flash about 2
seconds.
4. Press the ID connect button of RF keyboard or mouse for pairing with the Receiver
within 3 seconds.
5. The Access LED will go off and RF keyboard or mouse are ready. If Access LED is still
blinking, please repeat the above procedure 1 to 4 again.
Note :
1. There are total 65,536 IDs for pairing.
2. If you find some interference from other wireless keyboard or mouse, you can repeat
the above procedure 3 and 4 for re-pairing and change to a new ID.
3. Check the batteries power supply if pairing was unsuccessfully. Repeats pairing
process step 1~5 after checking battery power status.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2007:08:27 09:19:21+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2007:08:30 18:29:53+08:00
Metadata Date                   : 2007:08:30 18:29:53+08:00
Format                          : application/pdf
Creator                         : BETTY
Title                           : SK-7225_USER MANUAL_刪掉方塊圖_.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:d9ef538b-8f84-4cf4-8978-51a9639a5da6
Instance ID                     : uuid:e282aea2-c9aa-48ad-a476-dc8b242b916d
Page Count                      : 4
Author                          : BETTY
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H4IMS27RF003

Navigation menu