LITE ON TECHNOLOGY WCBN3507R Wi-Fi +BT SDIO Combo Module User Manual 05 Revise x

LITE-ON Technology Corp. Wi-Fi +BT SDIO Combo Module 05 Revise x

Manual

Download: LITE ON TECHNOLOGY WCBN3507R Wi-Fi +BT SDIO Combo Module User Manual 05  Revise x
Mirror Download [FCC.gov]LITE ON TECHNOLOGY WCBN3507R Wi-Fi +BT SDIO Combo Module User Manual 05  Revise x
Document ID3690240
Application IDFcGJ2yjTRbDFpALPpuHpwQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize72.8kB (909944 bits)
Date Submitted2017-12-22 00:00:00
Date Available2017-12-22 00:00:00
Creation Date2017-12-19 00:06:52
Producing SoftwareAcrobat Distiller 9.5.5 (Windows)
Document Lastmod2017-12-19 00:06:52
Document TitleMicrosoft Word - 05.User manual(Revise).docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: User

PROD
DUCT SPECIIFICA
ATION
802.111a/b/g/n/a
ac 2Tx2R+
+BT V4.2
2LE USB Combo M
Module
WC
CBN3507R
Usser Ma
anu
uall
Page 1/16
CONTEN
NT
PR
RODUCT FE
EATURES ........................................................................................................................ 7
WI-FI FEATURE ............................................................................................................................................................................. 7
CO
OMMON FEATU
URE ...................................................................................................................................................................... 8
PR
RODUCT SP
PECIFICATIIONS ........................................................................................................... 9
MA
AIN CHIPSET ................................................................................................................................................................................ 9
RE
ECOMMEND
DED OPERA
ATION CON
NDITIONS .......................................................................... 12
DC
C CHARACT
TERISTICS ......................
............................................................................................ 12
PO
OWER ON SEQUENCE
TIMING
.................................................................................................. 12
PIIN ASSIGME
ENT ................................................................................................................................. 13
FO
OOTPRINT......................................................................................................................................... 13
MECHANICA
AL .................................................................................................................................... 14
I-P
PEX CONNE
ECTOR SPEC
C............................................................................................................... 15
EE
EPROM INF
FORMATION
N ............................................................................................................... 16
WI-FI ................................................................................................................................................................................................16
EN
NVIRONME
ENTAL ............................................................................................................................ 16
OPPERATING ....................................................................................................................................................................................16
STTORAGE .........................................................................................................................................................................................16
Page 2/16
FCC
C Statemen
nt:
Fedeeral Commun
nication Com
mmission Inteerference Staatement
This equipment has been tessted and fou nd to complyy with the lim
mits for a Claass B digital device,
purssuant to Partt 15 of the FC
CC Rules. Theese limits are
e designed to
o provide reaasonable
prottection again
nst harmful in
nterference iin a residential installatio
on. This equippment generrates,
usess and can rad
diate radio frrequency eneergy and, if not
n installed and
a used in aaccordance with
the instructions, may cause harmful
interrference to radio
commu
unications. H owever, there is
no gguarantee that interferen
nce will not ooccur in a parrticular installation. If thiss equipment
doess cause harm
mful interfere
ence to radioo or television reception, which can b e determined by
turn
ning the equipment off an
nd on, the usser is encouraged to try to correct thee
interference by one
o of the fo
ollowing meaasures:
eceiving anteenna.
˗ġReeorient or relocate the re
˗ġIncrease the seeparation be
etween the eequipment an
nd receiver.
˗ġCo
onnect the equipment into an outlet on a circuit different
from
m that to whhich the receiver
is
nected.
conn
˗ġCo
onsult the deealer or an exxperienced r adio/TV tech
hnician for he
elp.
FCC Caution: Anyy changes orr modificatio ns not expre
essly approve
ed by the parrty responsib
ble
void the user’s authhority to ope
erate this equ
uipment.
for ccompliance could
This device comp
plies with Part 15 of the FCC Rules. Operation
is subject to thee following tw
wo
ditions: (1) This device may not causee harmful interference, and (2) this deevice must
cond
acceept any interfference rece
eived, includi ng interference that mayy cause undeesired operattion.
For product avaiilable in the USA/Canada
~11 can be opperated.
market, onlyy channel 1~
Seleection of otheer channels is not possiblle.
This device and its
i antenna(ss) must not bbe co•located with any otther transmiitters except in
ordance with
h FCC multi•ttransmitter pproduct procedures.
acco
Refeering to the multi•transm
mitter policy, multiple•traansmitter(s) and module((s) can be
operated simultaaneously witthout C2PC.
IMPORTANT NOTE:
FCC Radiation Exxposure State
ement:
This equipment complies witth FCC radiattion exposure limits set fo
orth for an uuncontrolled
enviironment. Th
his equipmen
nt should be installed and
d operated with
w minimum
m distance 20
0 cm
betw
ween the rad
diator & yourr body.
Page 3/16
IMPORTANT NOTE:
ntended for OEM
integra tor. The OEM
M integrator is responsiblle for the
This module is in
com
mpliance to alll the rules th
hat apply to tthe product into which th
his certified RRF module iss
integgrated.
Additional testin
ng and certification may bbe necessaryy when multiple modules are used.
20 ccm minimum distance has to be able tto be maintaained betwee
en the antennna and the users
for tthe host this module is in
ntegrated int o. Under succh configurattion, the FCCC radiation
expo
osure limits set
s forth for an populatioon/uncontrollled environm
ment can be satisfied.
Any changes or modification
s not expres sly approved
d by the manufacturer coould void the
userr's authority to operate this equipme nt.
USERS MANUAL OF THE END
D PRODUCT:
he users man
nual of the en
nd product, tthe end userr has to be informed to keeep at least 20
In th
cm sseparation with
w the antenna while th is end produ
uct is installed and operatted. The end
userr has to be in
nformed thatt the FCC raddio•frequenccy exposure guidelines
fo r an
unco
ontrolled envvironment caan be satisfieed. The end user
u has to also be inform
med that anyy
chan
nges or modifications nott expressly a pproved by the
man
nufacturer co
ould void the
e user's authoority to operate this equipment. If thee size of the end
prod
duct is smalleer than 8x10cm, then addditional FCC part 15.19 sttatement is rrequired to be
available in the users
manual: This devicee complies with
w Part 15 of
o FCC rules. Operation iss
subject to the fo
ollowing two
cond
ditions: (1) th
his device maay not causee harmful inte
erference and (2) this devvice must acccept
any
interference received, includ
ding interfereence that maay cause undesired operaation.
LABEL OF THE EN
ND PRODUCT
T:
The final end pro
oduct must be
b labeled in a visible are
ea with the fo
ollowing " Coontains TX FC
CC ID:
PPQ
Q‐ WCBN3507
7R ". If the size of the endd product is larger than 8x10cm,
thenn the following
mplies with Part
FCC part 15.19 statement
haas to also be available on the label: Th
his device com
15 o
of FCC rules. Operation is subject to thhe following two conditio
ons: (1) this ddevice may not
causse harmful in
nterference and
a (2) this
deviice must acceept any interrference receeived, including interfere
ence that mayy cause
undesired operaation.
OEM
M Integrator Checklist
The party below will implement the LITE‐‐ON Module in host syste
ems in accorddance with the
instrructions speccified in this document a nd the docum
ments refere
enced hereinn.
Page 4/16
1. The OEM inttegrator will ensure the M
Module is inttegrated in a host system
ms using only the
approved an
ntenna mode
el(s) describeed in this doccument.
2. The OEM inttegrator will ensure the aantenna placement inside
e the host syystem will
maintain thee required sp
pacing to endd user for RF Exposure co
ompliance, ass specified in
n this
document.
os are integrrated inside tthe host with
h the LITE‐ON
N Module, thhe OEM
3. If other radio
integrator will
w contact itss test lab, TCCB or LITE‐ON
N to determine if additionnal FCC
compliance evaluation iss required to meet FCC co
ollocation rules.
entation will contain the specified
4. The OEM inttegrator will ensure end uuser docume
regulatory wording
and ensure
the hhost system and
a the Module itself aree labeled as
specified in this
t document.
5. Th
he OEM integrator will en
nsure the Moodule is proggrammed in the
t factory w
with compliant
transmit power not exceedin
ng the levels specified in this document.
EM integratoor acknowled
dge its receip
pt of this doccument and the
LITE‐ON requestts that the OE
abovve instructions. You may contact LITEE‐ON with an
ny questions concerning tthis documen
nt or
the responsibilities of the OE
EM integratoor.
IC S
Statement:
This device comp
plies with Ind
dustry Canadda license•exxempt RSS sttandard(s). O
Operation is
subject to the fo
ollowing two conditions: ((1) this devicce may not ca
ause interferrence, and (2
2)
this device mustt accept any interference , including in
nterference that
may cauuse undesired
operation of thee device.
Le p
présent appareil est confo
orme aux CN R d'Industrie
e Canada app
plicables auxx appareils radio
exem
mpts de licen
nce. L'exploittation est auttorisée aux deux
conditio
ons suivantess : (1) l'appareil
ne d
doit pas prod
duire de brou
uillage, et (2) l'utilisateur de l'appareil doit accepteer tout
brou
uillage radioéélectrique su
ubi, même si le brouillage
e est susceptible d'en com
mpromettre le
foncctionnement.
For product avaiilable in the USA/Canada
market, onlyy channel 1~
~11 can be opperated.
Seleection of otheer channels is not possiblle.
Pour les produitss disponibless aux États•U
Unis / Canadaa du marché, seul le canaal 1 à 11 peuvent
êtree exploités. Séélection d'au
utres canaux n'est pas po
ossible.
This device and its
i antenna(ss) must not bbe co•located with any otther transmiitters except in
ordance with
h IC multi•traansmitter prooduct proced
dures.
acco
Refeering to the multi•transm
mitter policy, multiple•traansmitter(s) and module((s) can be
operated
simu
ultaneously without
reassessment peermissive chaange.
Page 5/16
Cet appareil et son antenne (s) ne doit paas être co•lo
ocalisés ou fo
onctionnemeent en
asso
ociation avecc une autre antenne ou trransmetteur.
The device for operation in the band 51550‐5250 MHzz is only for in
ndoor use too reduce the
poteential for harrmful interference to co••channel mobile satellite systems.
les d
dispositifs fon
nctionnant dans
la bandee 5150•5250
0 MHz sont ré
éservés uniqquement pou
ur
une utilisation à l’intérieur affin de réduir e les risques de brouillag
ge préjudiciabble aux systè
èmes
biles utilisantt les mêmes canaux.
de satellites mob
The maximum antenna gain permitted foor devices in the band 5725•5850 MH
Hz shall be su
uch
thatt the equipment still complies with thhe e.i.r.p. limits specified for point•to •point and
non•point•to•p
point operatio
on as approppriate.
ermis (pour les dispositiffs utilisant la bande 5725 •5850 MHz)
le gaain maximal d’antenne pe
doit se conformeer à la limite de p.i.r.e. sppécifiée pourr l’exploitatio
on point à pooint et non po
oint
oint, selon le cas.
à po
Dynamic Frequeency Selection (DFS) for d evices operaating in the bands
5250• 5350 MHz,
54700•5600 MHzz and 5650•5
5725 MHz.
Séleection dynam
mique de fréq
quences (DFSS) pour les dispositifs foncctionnant daans les bande
es
52500•5350 MHzz, 5470•5600
0 MHz et 56550•5725 MH
Hz.
The maximum antenna gain permitted foor devices in the bands 52
250•5350 M
MHz and
54700•5725 MHzz shall be succh that the eqquipment stiill complies with
w the e.i.r..p. limit.
le gaain maximal d’antenne pe
ermis pour lees dispositifss utilisant les bandes 52500•5350 MHzz et
54700•5725 MHzz doit se confformer à la liimite de p.i.rr.e.
Userrs should also be advised
d that high•ppower radars are allocated as primaryy users (i.e.
priority users) off the bands 5250•5350
MHz and 5650•5850 MHzz and that thhese radars could
nce and/or daamage to LE••LAN devicess.
causse interferen
De p
plus, les utilissateurs devraaient aussi êttre avisés qu
ue les utilisateurs de radaars de haute
puisssance sont désignés
utilisateurs princcipaux (c.•à•
•d., qu’ils ontt la priorité) pour les ban
ndes
52500•5350 MHzz et 5650•58
850 MHz et qque ces radarrs pourraientt causer du bbrouillage et//ou
des dommages aux
a dispositiffs LAN•EL.
ment.
Pour une utilisattion en intérieur uniquem
Page 6/16
IMPORTANT NOTE:
ment:
IC Raadiation Exposure Statem
This equipment complies witth IC RSS•10 2 radiation exposure
limits set forth ffor an
unco
ontrolled
enviironment. Th
his equipmen
nt should be installed and
d operated with
w minimum
m distance 20
0 cm
betw
ween the rad
diator & yourr body.
Cet équipement est conform
me aux limitess d'exposition aux rayonn
nements IC éétablies pourr un
enviironnement non contrôlé
é. Cet équipeement doit êttre installé et utilisé avecc un minimum
m de
20 ccm de distancce entre la so
ource de ray onnement et votre corpss.
This module is in
ntended for OEM
integra tor. The OEM
M integrator is still responnsible for the
e IC
com
mpliance requ
uirement of the
t end prodduct, which in
ntegrates this module.
Any changes or modification
s not expres sly approved
d by the manufacturer coould void the
userr's authority to operate this equipme nt.
USERS MANUAL OF THE END
D PRODUCT:
In th
he users man
nual of the en
nd product, tthe end userr has to be informed to keeep at least 20
cm
sepaaration with the antenna while this ennd product iss installed an
nd operated. The end use
er
has to be
he IC radio•frrequency expposure guide
elines for an uncontrolledd environment
informed that th
can be
satissfied. The end user has to
o also be infoormed that any
a changes or modificatiions not
exprressly approvved by the manufacturer
r could void the
t user's autthority to opperate this
equipment. Opeeration is subject to the foollowing two
o conditions: (1) this devicce may not
causse harmful in
nterference and
a (2) this ddevice must accept
any in
nterference rreceived,
inclu
uding interfeerence that may
m cause unndesired operation.
LABEL OF THE EN
ND PRODUCT
T:
The final end pro
oduct must be
b labeled in a visible are
ea with the fo
ollowing " Coontains TX IC:
4491A‐WCBN3507R ".
Page 7/16
PRO
ODUCT FEATURES
BT FEATU
URE:
 Bluuetooth V4.2 LE system
Bacckwards com
mpatible withh BT version of 1.1, 1.2, 2.0,
2 2.1, 3.0++HS and 4.0




Bluuetooth Classs II transmisssion power
Besst-in-class BT
T/Wi-Fi coexxistence perfformance
Suppport for Sim
mple Pairing ((SP) and Enh
hanced Inquiiry Responsee (EIR) functtion
Suppport for SCA
ATTERNET and up to picconets simulltaneously wi
with backgrou
und
inqquiry/page scan
 Suppport wide-band speech aand hardwaree acceleratedd SBC codec for A2DP
streeaming
 Suppport Wake On
O Bluetoothh
WI-FI FEA
ATURE:





Opeerate at ISM frequency B
Band (2.4/5G
GHz)
IEE
EE Standardss Support, 8002.11a ,802.1
11b, 802.11g, 802.11n and
nd 802.11ac
Suppport for both
h 20 MHz annd 40 MHz channel
width
Entterprise levell security suppporting: WP
PS2.0,WAPI, WPA, WPA
A2
Suppport 2 transm
mission and 2 receiving, transmission
n rate can upp to 300Mbpss
(Phhysical Rate) in downstreeam and upsttream
 Duaal-stream IEE
EE 802.11acc support for 80MHz chan
nnels providdes PHY layer
ratees up to 867M
Mbps
 QoS
S support of WFA WMM
M, WMMPS
 Suppport for WI--Fi Direct
 Suppport Wake On
O WLAN
COMMON FEATURE:
 MT
T7662TU is a single chip integrated IE
EEE 802.11 a/b/g/n/ac annd Bluetooth
4.22LE with a sin
ngle USB innterface






PA,, LNA, and T/R
T switch inntegration forr Wi-Fi and Bluetooth
Besst-in-class acctive and idlee power conssumption performance
Fully compliancce with USB
B v2.0 specifiication
Suppport OS: Lin
nux based
RoH
HS complian
nce
Low
w Halogen co
ompliance
Page 8/16
PRO
ODUCT SPECIFICAT
TIONS
MAIN CHIP
PSET
MediaTeek MT7612U
FUNCTIONA
AL SPECIFIC
CATIONS
BT Fu
unction
Standard
Bluuetooth V4.2
2LE
Bus Interrface
US
SB2.0
Data Ratte
1M
Mbps, 2Mbpss and Up to 3Mbps
Modulattion Scheme
GF
FSK, π/4-DQ
QPSK and 8-D
DPSK
Frequenccy Range
2.4402~2.480 GHz
Receiverr Sensitivity
< 00.1% BER att -80dBm
Wi-Fii Function
Standard
IEE
EE802.11a; IEEE802.11b
b; IEEE 802 .11g; IEEE
8022.11n. IEEE802.11ac
Bus Interrface
US
SB2.0
Data Ratte
8022.11a:
54, 48, 36
6, 24, 18, 12, 9, 6 Mbps
8022.11b:
11, 5.5, 2, 1 Mbps
8022.11g:
6, 24, 18, 12, 9, 6 Mbps
54, 48, 36
8022.11n:
MCS 0 to
o 15 for HT20
0MHz
MCS 0 to
o 15 for HT40
0MHz
8022.11ac:
o 8 for HT20M
MHz
MCS 0 to
MCS 0 to
o 9 for HT40M
MHz
MCS 0 to
o 9 for HT80M
MHz
Media Access
Contrrol
CS
SMA/CA witth ACK
Modulattion Techniq
que
8022.11a:
64QAM, 16QAM, QP
PSK, BPSK
8022.11b:
CCK, DQ
QPSK, DBPS
SK
8022.11g:
64QAM, 16QAM, QP
PSK, BPSK
8022.11n:
PSK, BPSK
64QAM, 16QAM, QP
8022.11ac:
M, 64QAM, 16QAM, QPSSK, BPSK
256QAM
Page 9/16
Network
k Architecture
Operatioon Channel
Frequenccy Range
EVM
Frequenccy Offset
Receiverr Sensitivity
Security
Inffrastructure mode
2.44GHz
11: (Ch. 1-11)
– Uniteed States
13: (Ch. 1-13)
– Europ
pe
14: (Ch. 1-14)
– Japan
5G
GHz
21: USA
19: EU
8: Japan
8022.11bg
2.400 ~ 2.4835 GHz
8022.11a
5.15 ~ 5.8
85 GHz
CC
CK < 35%
OF
FDM < -25dB
MC
CS7(20MHzz) < -28dB
MC
CS7(40MHzz) < -28dB
MC
CS9(80MHzz) < -32dB
2.44&5GHz
-200ppm < Centter Frequency
y < +20ppm
8022.11a:
-86 dBm@
@6Mbps
-70 dBm@
@54Mbps
8022.11b:
-88 dBm@
@1Mbps
-82 dBm@
@11Mbps
8022.11g:
-86 dBm@
@6Mbps
-71 dBm@
@54Mbps
8022.11n:
22.4G/5G
20MHz
-86 dBm@
@MCS0
-70 dBm@
@MCS7
-68 dBm@
@MCS15
40MHz
-83 dBm@
@MCS0
-67 dBm@
@MCS7
-65 dBm@
@MCS15
8022.11ac:
20MHz
-64 dBm@
@MCS8
40MHz
-62 dBm@
@MCS8
-59 dBm@
@MCS9
80MHz
-59 dBm@
@MCS8
-56 dBm@
@MCS9
WP
PS, WPA, WPA2,
WEP 64bit
& 128bbit, IEEE 80
02.1X,
IEE
EE 802.11i
Page 10/16
Common Function
Operatin
ng Voltage
3.33 V ±10% I/O
O supply volttage
Mode
Power Consumption
TX
RX
Unassocia
teed Idle
Antenna Type
Average
2.4
4G
5G
44
40mA
450
0mA
30
00mA
480
0mA
40mA
Peak
2.4G
5G
650m
mA
850m
mA
Triiple U.FL co
onnectors for WiFi&BT
Page 11/16
RECOMMEND
DED OPER
RATION CO
ONDITION
NS
Syymbol
Rating
Min
Tyyp
Max
Units
VD
DD33
3.3V
Supply Voltage
2.97
3.33
3.63
VD
DD12
1.2V Supply Voltage
1.14
1.22
1.26
VD
DD15
1.5V Supply Voltage
1.42
25
1.55
1.57
75
Min
Tyyp
Max
Units
DC
C CHARAC
CTERISTIC
CS
Syymbol
Parameterr
VIL
oltage
Innput Low Vo
-0.28
0.6
VIH
Innput High Voltage
2.0
3.63
VOL
Output
Low Voltage
-0.28
0.4
VOH
Output
High Voltage
2.4
3.63
POW
WER ON SEQUENCE
E TIMING
Page 12/16
PIN
N ASSIGME
ENT
Pin
n.
100
111
122
133
144
Pin Define
Descrription
+3.3V
3.3V ssource
+3.3V
3.3V ssource
USB__DUSB__D+
USB D
DataUSB D
Data+
GND
Grounnd
RESE
ET#
System
m reset MT7
7612U, low active
WoW
WLAN#
GND
Wakee up system via
v wifi, low active
Grounnd
WoBT
Wakee up system via
v BT, low active
GND
Grounnd
GND
GND
Grounnd
Grounnd
GND
Grounnd
GND
Grounnd
FOO
OTPRINT
Top View
Page 13/16
Status
YES
YES
YES
YES
YES
YES
YES
YES
NC
YES
YES
YES
YES
YES
ME
ECHANICA
AL
Page 14/16
I-P
PEX CONN
NECTOR SPEC
Page 15/16
EE
EPROM INFORMAT
TION
WI-FI
Reg Dom
main
World W
Wide
2.4G//5G
Read from registrry; Control by
y driver
Offset 0xx38 for 5G: 0xFF
Offset 0xx39 for 2.4G
G: 0xFF
Vendor ID
0x0E8D
Device ID
0x76A0
ENVIRONME
ENTAL
OPERATIN
NG
Ambiient Operatin
ng Temperatuure: 0 to 70 C
 (32 to 158 F)
Ambiient Relativee Humidity: 55-90% (non-condensing)
STORAGE
Ambiient Temperaature: -40 to 80 C (-40 to 176 F)
Ambiient Relativee Humidity: 55-95% (non-condensing
Page 16/16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : User
Create Date                     : 2017:12:19 00:06:52+08:00
Modify Date                     : 2017:12:19 00:06:52+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - 05.User manual(Revise).docx
Creator                         : User
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:ff04835b-4f6e-40ba-80eb-3ba08f78f10a
Instance ID                     : uuid:4819be79-b5e3-413f-9840-72c4af636d9c
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PPQ-WCBN3507R

Navigation menu