LITE ON TECHNOLOGY WCBN3509A USB Combo Module User Manual 05 Revise x
LITE-ON Technology Corp. USB Combo Module 05 Revise x
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3675543 |
| Application ID | 4PbCKZQwJmi9rNyyWYjwkg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 60.18kB (752234 bits) |
| Date Submitted | 2017-12-13 00:00:00 |
| Date Available | 2017-12-13 00:00:00 |
| Creation Date | 2017-12-06 00:17:36 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2017-12-06 00:17:36 |
| Document Title | Microsoft Word - 05.User manual(Revise).docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | User |
PROD DUCT SPECIIFICA ATION 802.111a/b/g/n/a ac 2Tx2R+ +BT V4.1 1LE USB Combo M Module WC CBN3509A Usser Ma anu uall Page 1/14 CONTEN NT DE ESCRIPTION....................................................................................................................................... 8 PR RODUCT FE EATURES ........................................................................................................................ 8 PR RODUCT SP PECIFICATIIONS ........................................................................................................... 9 MA AIN CHIPSET ................................................................................................................................................................................ 9 FU UNCTIONAL SPECIFICATIONS S ................................................................................................................................................ 9 RE ECOMMEND DED OPERA ATION CON NDITIONS .......................................................................... 11 PIIN ASSIGME ENT ................................................................................................................................. 12 FO OOTPRINT......................................................................................................................................... 12 MECHANICA AL .................................................................................................................................... 13 PO OWER-UP SEQUENCE TIMING .................................................................................................. 14 EE EPROM INF FORMATION N ............................................................................................................... 14 BT T ...........................................................................................................................................................................14 WI-FI ................................................................................................................................................................................................14 EN NVIRONME ENTAL ............................................................................................................................ 14 OPPERATING ....................................................................................................................................................................................14 STTORAGE .........................................................................................................................................................................................14 Page 2/14 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ˗ġReorient or relocate the receiving antenna. ˗ġIncrease the separation between the equipment and receiver. ˗ġConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ˗ġConsult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co•located with any other transmitters except in accordance with FCC multi•transmitter product procedures. Refering to the multi•transmitter policy, multiple•transmitter(s) and module(s) can be operated simultaneously without C2PC. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Page 3/14 ORTANT NOTE: ntended for OEM integra tor. The OEM M integrator is responsiblle for the module is in mpliance to alll the rules th hat apply to tthe product into which th his certified RRF module iss grated. itional testin ng and certification may bbe necessaryy when multiple modules are used. cm minimum distance has to be able tto be maintaained betwee en the antennna and the users the host this module is in ntegrated int o. Under succh configurattion, the FCCC radiation osure limits set s forth for an populatioon/uncontrollled environm ment can be satisfied. changes or modification s not expres sly approved d by the manufacturer coould void the r's authority to operate this equipme nt. RS MANUAL OF THE END D PRODUCT: he users man nual of the en nd product, tthe end userr has to be informed to keeep at least 20 separation with w the antenna while th is end produ uct is installed and operatted. The end r has to be in nformed thatt the FCC raddio•frequenccy exposure guidelines fo r an ontrolled envvironment caan be satisfieed. The end user u has to also be inform med that anyy nges or modifications nott expressly a pproved by the nufacturer co ould void the e user's authoority to operate this equipment. If thee size of the end duct is smalleer than 8x10cm, then addditional FCC part 15.19 sttatement is rrequired to be lable in the users manual: This devicee complies with w Part 15 of o FCC rules. Operation iss ect to the fo ollowing two ditions: (1) th his device maay not causee harmful inte erference and (2) this devvice must acccept rference received, includ ding interfereence that maay cause undesired operaation. ND PRODUCT T: EL OF THE EN final end pro oduct must be b labeled in a visible are ea with the fo ollowing " Coontains TX FC CC ID: Q‐ WCBN3509 9ANB ". If the e size of the end productt is larger tha an 8x10cm, t hen the owing FCC paart 15.19 stattement has tto also be available on the label: This device comp plies h Part 15 of FCC F rules. Op peration is suubject to the following tw wo conditionss: (1) this devvice y not cause harmful interference and (2) this ice must acceept any interrference receeived, including interfere ence that mayy cause esired operaation. M Integrator Checklist party below will implement the LITE‐‐ON Module in host syste ems in accorddance with the ructions speccified in this document a nd the docum ments refere enced hereinn. Page 4/14 The OEM inttegrator will ensure the M Module is inttegrated in a host system ms using only the approved an ntenna mode el(s) describeed in this doccument. The OEM inttegrator will ensure the aantenna placement inside e the host syystem will maintain thee required sp pacing to endd user for RF Exposure co ompliance, ass specified in n this document. If other radio os are integrrated inside tthe host with h the LITE‐ON N Module, thhe OEM integrator will w contact itss test lab, TCCB or LITE‐ON N to determine if additionnal FCC compliance evaluation iss required to meet FCC co ollocation rules. entation will contain the specified The OEM inttegrator will ensure end uuser docume regulatory wording and ensure the hhost system and a the Module itself aree labeled as specified in this t document. he OEM integrator will en nsure the Moodule is proggrammed in the t factory w with compliant ng the levels specified in this document. smit power not exceedin EM integratoor acknowled dge its receip pt of this doccument and the ‐ON requestts that the OE ve instructions. You may contact LITEE‐ON with an ny questions concerning tthis documen nt or responsibilities of the OE EM integratoor. Statement: plies with Ind dustry Canadda license•exxempt RSS sttandard(s). O Operation is device comp ect to the fo ollowing two conditions: ((1) this devicce may not ca ause interferrence, and (2 2) device mustt accept any interference , including in nterference that may cauuse undesired ration of thee device. présent appareil est confo orme aux CN R d'Industrie e Canada app plicables auxx appareils radio mpts de licen nce. L'exploittation est auttorisée aux deux conditio ons suivantess : (1) l'appareil doit pas prod duire de brou uillage, et (2) l'utilisateur de l'appareil doit accepteer tout uillage radioéélectrique su ubi, même si le brouillage e est susceptible d'en com mpromettre le ctionnement. market, onlyy channel 1~ ~11 can be opperated. product avaiilable in the USA/Canada ection of otheer channels is not possiblle. r les produitss disponibless aux États•U Unis / Canadaa du marché, seul le canaal 1 à 11 peuvent e exploités. Séélection d'au utres canaux n'est pas po ossible. device and its i antenna(ss) must not bbe co•located with any otther transmiitters except in ordance with h IC multi•traansmitter prooduct proced dures. ering to the multi•transm mitter policy, multiple•traansmitter(s) and module((s) can be rated ultaneously without reassessment peermissive chaange. Page 5/14 appareil et son antenne (s) ne doit paas être co•lo ocalisés ou fo onctionnemeent en ociation avecc une autre antenne ou trransmetteur. device for operation in the band 51550‐5250 MHzz is only for in ndoor use too reduce the ential for harrmful interference to co••channel mobile satellite systems. dispositifs fon nctionnant dans la bandee 5150•5250 0 MHz sont ré éservés uniqquement pou ur utilisation à l’intérieur affin de réduir e les risques de brouillag ge préjudiciabble aux systè èmes biles utilisantt les mêmes canaux. atellites mob maximum antenna gain permitted foor devices in the band 5725•5850 MH Hz shall be su uch t the equipment still complies with thhe e.i.r.p. limits specified for point•to •point and point operatio on as approppriate. •point•to•p ain maximal d’antenne pe ermis (pour les dispositiffs utilisant la bande 5725 •5850 MHz) se conformeer à la limite de p.i.r.e. sppécifiée pourr l’exploitatio on point à pooint et non po oint oint, selon le cas. amic Frequeency Selection (DFS) for d evices operaating in the bands 5250• 5350 MHz, 0•5600 MHzz and 5650•5 5725 MHz. ection dynam mique de fréq quences (DFSS) pour les dispositifs foncctionnant daans les bande es 0•5350 MHzz, 5470•5600 0 MHz et 56550•5725 MH Hz. maximum antenna gain permitted foor devices in the bands 52 250•5350 M MHz and 0•5725 MHzz shall be succh that the eqquipment stiill complies with w the e.i.r..p. limit. ain maximal d’antenne pe ermis pour lees dispositifss utilisant les bandes 52500•5350 MHzz et 0•5725 MHzz doit se confformer à la liimite de p.i.rr.e. rs should also be advised d that high•ppower radars are allocated as primaryy users (i.e. rity users) off the bands 5250•5350 MHz and 5650•5850 MHzz and that thhese radars could se interferen nce and/or daamage to LE••LAN devicess. plus, les utilissateurs devraaient aussi êttre avisés qu ue les utilisateurs de radaars de haute ssance sont désignés utilisateurs princcipaux (c.•à• •d., qu’ils ontt la priorité) pour les ban ndes 0•5350 MHzz et 5650•58 850 MHz et qque ces radarrs pourraientt causer du bbrouillage et//ou dommages aux a dispositiffs LAN•EL. r une utilisattion en intérieur uniquem ment. Page 6/14 ORTANT NOTE: adiation Exposure Statem ment: equipment complies witth IC RSS•10 2 radiation exposure limits set forth ffor an ontrolled ironment. Th his equipmen nt should be installed and d operated with w minimum m distance 20 0 cm ween the rad diator & yourr body. équipement est conform me aux limitess d'exposition aux rayonn nements IC éétablies pourr un ironnement non contrôlé é. Cet équipeement doit êttre installé et utilisé avecc un minimum m de cm de distancce entre la so ource de ray onnement et votre corpss. module is in ntended for OEM integra tor. The OEM M integrator is still responnsible for the e IC mpliance requ uirement of the t end prodduct, which in ntegrates this module. changes or modification s not expres sly approved d by the manufacturer coould void the r's authority to operate this equipme nt. RS MANUAL OF THE END D PRODUCT: he users man nual of the en nd product, tthe end userr has to be informed to keeep at least 20 aration with the antenna while this ennd product iss installed an nd operated. The end use er to be he IC radio•frrequency expposure guide elines for an uncontrolledd environment rmed that th be sfied. The end user has to o also be infoormed that any a changes or modificatiions not ressly approvved by the manufacturer r could void the t user's autthority to opperate this ipment. Opeeration is subject to the foollowing two o conditions: (1) this devicce may not se harmful in nterference and a (2) this ddevice must accept any in nterference rreceived, uding interfeerence that may m cause unndesired operation. EL OF THE EN ND PRODUCT T: final end pro oduct must be b labeled in a visible are ea with the fo ollowing " Coontains TX IC: 1A‐WCBN3509ANB ". Page 7/14 DESCRIPTION A9378 is a siingle-die wirreless local aarea network(WLAN) and d Bluetooth((BT) combo QCA soluution to suppoort 2x2 MIM MO with two spatial stream ms IEEE802 2.11 a/b/g/n/aac WLAN stanndards and BT T 4.1+HS en nabling seam mless integrattion of WLAN N/BT and Loow Energy techhnology. PRO ODUCT FEATURES Bluetootth V4.1 LE system Backwarrds compatible with BT vversion of 1.1 1, 1.2, 2.0, 2..1, 3.0+HS aand V4.0LE Bluetootth Class I trannsmission poower Support for Adaptivee Frequency Hopping(AF FH), Secure Simple Pairinng (SSP) and R) function Extendedd Inquiry Reesponse (EIR Scatterneet operation with up to foour active picconets with background sscan and sup pport for scatteer mode Low pow wer consump ption for meeeting worldw wide energy standards Operate at ISM frequ uency Band ((2.4/5GHz) IEEE Staandards Supp port, 802.11aa ,802.11b, 802.11g 802.11n and 802..11ac Support for both 20 MHz/40 MH Hz channel width in 2.4GH Hz and 20 M MHz/40 MHz channeel width in 5G GHz MHz/80M Enterprisse level secuurity supportiing: WPS2.0,WAPI, WPA A, WPA2 Dual-streeam IEEE 8002.11n suppoort for 20MH Hz and 40MH Hz channels pprovides PH HY layer ratees up to 300M Mbps Dual-streeam IEEE 8002.11ac suppport for 80MHz channels provides PH HY layer ratees up to 867M Mbps Support for WI-Fi Diirect Support MU-MIMO Fully com mpliance witth USB v2.00 specification Support OS: Linux based RoHS coompliance Low Hallogen compliiance Page 8/14 PRO ODUCT SPECIFICAT TIONS MAIN CHIP PSET Qualcom mm Atheros QCA9378-77 FUNCTIONA AL SPECIFIC CATIONS BT Fu unction Standard Bluuetooth V4.1 1LE Bus Interrface US SB2.0 Data Ratte 1M Mbps, 2Mbpss and Up to 3Mbps Modulattion Scheme GF FSK, π/4-DQ QPSK and 8-D DPSK Frequenccy Range 2.4402~2.480 GHz Transmit Output Po ower +4 ≤ Output Po ower ≤ +10dB Bm; Class I D Device Receiverr Sensitivity < 00.1% BER att -80dBm Wi-Fii Function Standard IEE EE802.11a; IEEE802.11b b; IEEE 802 .11g; IEEE 8022.11n; IEEE802.11ac Bus Interrface US SB2.0 Data Ratte 8022.11a: 54, 48, 36 6, 24, 18, 12, 9, 6 Mbps 8022.11b: 11, 5.5, 2, 1 Mbps 8022.11g: 6, 24, 18, 12, 9, 6 Mbps 54, 48, 36 8022.11n: MCS 0 to o 15 for HT20 0MHz MCS 0 to o 15 for HT40 0MHz 8022.11ac: MCS 0 to o 8 for HT20M MHz MCS 0 to o 9 for HT40M MHz MCS 0 to o 9 for HT80M MHz Media Access Contrrol CS SMA/CA witth ACK Modulattion Techniq que 8022.11a: 64QAM, 16QAM, QP PSK, BPSK 8022.11b: CCK, DQ QPSK, DBPS SK 8022.11g: PSK, BPSK 64QAM, 16QAM, QP 8022.11n: 64QAM, 16QAM, QP PSK, BPSK 8022.11ac: 256QAM M, 64QAM, 16QAM, QPSSK, BPSK Page 9/14 Operatioon Channel Frequenccy Range Receiverr Sensitivity 2.44GHz – Uniteed States 11: (Ch. 1-11) 13: (Ch. 1-13) – Europ pe 14: (Ch. 1-14) – Japan 5G GHz 21: USA 19: EU 8: Japan 8022.11bg 2.400 ~ 2.4835 GHz 8022.11a 5.15 ~ 5.8 85 GHz 8022.11a: -86 dBm@ @6Mbps -70 dBm@ @54Mbps 8022.11b: -88 dBm@ @1Mbps -82 dBm@ @11Mbps 8022.11g: -86 dBm@ @6Mbps -70 dBm@ @54Mbps 8022.11n(2.4GH Hz): 20MHz -86 dBm@ @MCS0 -69 dBm@ @MCS7 40MHz -83 dBm@ @MCS0 -66 dBm@ @MCS7 8022.11n(5GHz) z): 20MHz -84 dBm@ @MCS0 -67 dBm@ @MCS7 Page 10/14 40MHz -81 dBm@MCS0 -64 dBm@MCS7 802.11ac: 20MHz -64 dBm@MCS8 40MHz -62 dBm@MCS8 -59 dBm@MCS9 80MHz -59 dBm@MCS8 -56 dBm@MCS9 WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X, IEEE 802.11i Security Common Function Operating Voltage 3.3 V ±5% I/O supply voltage Mode Power Consumption TX RX Disable WiFi+BT Average 2.4G 5G 630mA 715mA 335mA 375mA 81mA 30mA 2.4G 900mA Peak 5G 1150mA @Wake up mode Antenna Type Dual U.FL Antenna for WiFi/BT RECOMMENDED OPERATION CONDITIONS Symbol VDD33 Parameter 3.3V Supply Voltage Page 11/14 Min Typ Max Units 3.14 3.3 3.46 PIN N ASSIGME ENT Pin n. 100 111 122 133 144 Pin Define Descrription +3.3V 3.3V ssource +3.3V 3.3V ssource USB__DUSB__D+ USB D DataUSB D Data+ GND Grounnd RESE ET# System m reset QCA A9378, low active WoW WLAN# GND Wakee up system via v wifi, low active Grounnd WoBT Wakee up system via v BT, high active GND Grounnd GND GND Grounnd Grounnd GND Grounnd GND Grounnd FOOTPRINT Top View Page 12/14 Status YES YES YES YES YES YES YES YES YES YES YES YES YES YES MECHANICA AL Page 13/14 POW WER-UP SEQUENCE E TIMING *Nootes: 1. T There shoulld be at leasst 30ms delaay between two conseccutive toggle les. EE EPROM INFORMAT TION BT Vendoor ID 0x0C CF3 Produ uct ID 0x93778 WI-FI Reg Domain Vendoor ID 0x00C CF3 Devicee ID 0x93778 ENV VIRONMENTAL NG OPERATIN Operaating Temperature: 0 to 770 C (32 to 158 F) Relattive Humidity y: 5-90% (noon-condensin ng) STORAGE Tempperature: -40 to 80 C (-440 to 176 F) Relattive Humidity y: 5-95% (noon-condensin ng) Page 14/14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : User Create Date : 2017:12:06 00:17:36+08:00 Modify Date : 2017:12:06 00:17:36+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.5.5 (Windows) Format : application/pdf Title : Microsoft Word - 05.User manual(Revise).docx Creator : User Document ID : uuid:2e1801ab-49aa-417f-aebc-65338972d4ec Instance ID : uuid:43df69b3-4f0f-41a9-96b3-e7d84b69cc40 Page Count : 14EXIF Metadata provided by EXIF.tools