LITE ON TECHNOLOGY WCBN4503M Wi-Fi (11a/b/g/n/ac 2Tx2R) + BT(V4.1 LE) SDIO Combo User Manual WCBN4503M

LITE-ON Technology Corp. Wi-Fi (11a/b/g/n/ac 2Tx2R) + BT(V4.1 LE) SDIO Combo WCBN4503M

Users Manual

Page 1/14 USER MANUALWi-Fi (11a/b/g/n/ac 2Tx2R) + BT (V4.1 LE) SDIO Combo ModuleWCBN4503MMarvell 88w8897Version 1.3Change HistoryRevisionDateAuthorChange ListVersion 1.02015/05/17Ben J. ChenPreliminaryVersion 1.12015/07/01Ben J. ChenUpdate Transmit Output PowerUpdate Pin Assignment- Change Pin13 to NC, using internal 1.8VUpdate Connector SPECVersion 1.22015/07/09Ben J. ChenUpdate Power ConsumptionVersion 1.32015/07/22Ben J. ChenUpdate Antenna SPEC- Remove Sponge and Heat Shrink tubing* This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
Page 2/14 USER MANUAL Wi-Fi (11a/b/g/n/ac 2Tx2R) + BT (V4.1 LE) SDIO Combo ModuleWCBN4503MMarvell 88w8897Version 1.3Networking B.U.Lite-on Technology Corporation4F, No. 90, Chien I Rd.,Chung Ho, New Taipei City 235, Taiwan, R.O.C.Customer Approval: (Signature) (Title) (Company) (Date)(Please Sign Back by FAX. For Confirming the Spec Only, not an Official Agreement for OEM/ODM Business)
Page 3/14CONTENTPRODUCT FEATURES ....................................................................................................................4 BT FEATURE: ......................................................................................................................................... 4 WI-FIFEATURE:.....................................................................................................................................4 COMMON FEATURE ................................................................................................................................ 4 PRODUCT SPECIFICATIONS........................................................................................................5 MAIN CHIPSET ....................................................................................................................................... 5 FUNCTIONAL SPECIFICATIONS ...............................................................................................................5 RECOMMENDED OPERATION CONDITIONS..........................................................................7 PIN ASSIGNMENT............................................................................................................................8 CONNECTOR SPEC .........................................................................................................................8 POWER-UP SEQUENCE TIMING .................................................................................................9 MECHANICAL ..................................................................................................................................9 ANTENNA SPEC .............................................................................................................................10 WI-FIANTENNA (Q’TY: 2PCS) .............................................................................................................10 WI-FIANTENNA PHOTO ....................................................................................................................... 11 BT ANTENNA(Q’TY: 1PCS) ..................................................................................................................12 BT ANTENNA PHOTO ........................................................................................................................... 13 EEPROM INFORMATION ............................................................................................................14 BT........................................................................................................................................................ 14 WI-FI................................................................................................................................................... 14 ENVIRONMENTAL ........................................................................................................................ 14 OPERATING .......................................................................................................................................... 14 STORAGE.............................................................................................................................................. 14
Page 4/14PRODUCT FEATURESBT FEATURE:lBluetooth V4.1 LE systemBackwards compatible with BT version of 1.1, 1.2, 2.0, 2.1and 3.0+HSlSupport Dual-mode BluetoothlBT using SDIO interfacelBT transmission speed including 1M (GFSK), 2M (π/4-DQPSK) and 3Mbps(8DPSK) EDR and up to 54Mbps (Physical Rate) High Speed operationslSupport for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) functionlSupport master and slave piconet and scatternetlAdaptive Frequency Hopping (AFH) using Packet Loss Rate (PLR)lEnhanced low power scan modeWI-FIFEATURE:lOperate at ISM frequency Band (2.4/5GHz)lIEEE Standards Support, 802.11a,802.11b, 802.11g, 802.11n and 802.11aclSupport for both 20 MHz/40 MHz channel width in 2.4GHz and 20 MHz/40MHz/80MHz channel width in 5GHzlSupport SDIO 3.0 interface, 4-bit SDIO transfer modes at full clock range up to 208MHzlEnterprise level security supporting: WEP, WPA, WPA2, WAPIlDual-stream IEEE 802.11n support for 20MHz and 40MHz channels provides PHY layer rates up to 300MbpslDual-stream IEEE 802.11ac support for 80MHz channels provides PHY layer rates up to 867MbpslSupport Wi-Fi DirectlSupport Wake On WLANCOMMON FEATURElSupport for BT & WLAN Co-existencelSupport Linux OS based lRoHS compliancelLow Halogen compliance
Page 5/14PRODUCT SPECIFICATIONSMAIN CHIPSETMarvell 88w8897FUNCTIONAL SPECIFICATIONSBT FunctionStandardBluetooth V4.1 LEBus InterfaceSDIOData Rate1 Mbps, 2Mbps and Up to 3MbpsModulation SchemeGFSK, π/4-DQPSK and 8-DPSKFrequency Range2.402~2.480 GHzTransmit Output Power+4≤ Output Power ≤ +10 ; Class I DeviceReceiver Sensitivity< 0.1% BER at -80dBmWi-Fi FunctionStandardIEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n,IEEE 802.11acBus InterfaceSDIO3.0Data Rate802.11b:11, 5.5, 2, 1 Mbps802.11a/g:54, 48, 36, 24, 18, 12, 9, 6 Mbps802.11n:MCS 0 to 15 for HT20MHzMCS 0 to 15 for HT40MHz802.11ac:MCS 0 to 8 for HT20MHzMCS 0 to 9 for HT40MHzMCS 0 to 9 for HT80MHzMedia Access ControlCSMA/CA with ACKModulation Techniques802.11b:CCK, DQPSK, DBPSK802.11a/g:64QAM, 16QAM, QPSK, BPSK802.11n:64QAM, 16QAM, QPSK, BPSK802.11ac:256QAM, 64QAM, 16QAM, QPSK, BPSK
Page 6/14Network ArchitectureAd-hoc mode (Peer-to-Peer)Infrastructure modeOperation Channel2.4GHz11: (Ch. 1-11) –United States13: (Ch. 1-13) –Europe14: (Ch. 1-14) –Japan5GHz12: United States19: Europe8: JapanFrequency Range802.11bg2.412 ~ 2.462 GHz802.11a5.15 ~ 5.825 GHzTransmit Output Power –2x2(Tolerance: Ʋ1.5dBm)802.11a:14 dBm@6Mbps14 dBm@54Mbps802.11b:15 dBm@1Mbps15 dBm@11Mbps802.11g:14 dBm@6Mbps14 dBm@54Mbps802.11n(2.4GHz):20MHz: 13 dBm@MCS013 dBm@MCS740MHz:13 dBm@MCS013 dBm@MCS7802.11n(5GHz):20MHz: 11 dBm@MCS011 dBm@MCS740MHz:10 dBm@MCS010 dBm@MCS7802.11ac:20MHz: 11 dBm@MCS011 dBm@MCS840MHz:10 dBm@MCS010dBm@MCS810 dBm@MCS980MHz:8 dBm@MCS08 dBm@MCS88 dBm@MCS9Receiver Sensitivity802.11a:-86 dBm@6Mbps-70 dBm@54Mbps802.11b:-88 dBm@1Mbps-82 dBm@11Mbps802.11g:
Page 7/14-86 dBm@6Mbps-70 dBm@54Mbps802.11n(2.4GHz):20MHz -86 dBm@MCS0-69 dBm@MCS740MHz-83 dBm@MCS0-66 dBm@MCS7802.11n(5GHz):20MHz -84 dBm@MCS0-67 dBm@MCS740MHz-81 dBm@MCS0-64 dBm@MCS7802.11ac:20MHz -64 dBm@MCS840MHz-62 dBm@MCS8-59 dBm@MCS980MHz-59 dBm@MCS8-54 dBm@MCS9SecurityWPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X, IEEE 802.11iCommon FunctionOperating Voltage3.3V ±10% I/O supply voltageOS SupportedLinux BasedPower ConsumptionModeAveragePeak2.4G5G2.4G5GTX550mA750mA800mA900mARX110mA180mAIdle90mADeep Sleep1mAAntenna TypeTriple U.FL connectors for plugging external antennaRECOMMENDED OPERATION CONDITIONSSymbolParameter MinTypMaxUnitsAVDD333.3V analog power supply2.973.33.63VAVDD181.8V analog power supply1.711.81.98VVIO1.8V power supply for host interface1.621.81.98V3.3V power supply for host interface2.973.33.63V
Page 8/14PIN ASSIGNMENTPin.Pin DefineDescriptionStatus1GNDGroundYES2GNDGroundYES3SDIO_Data1SDIO Data Line1YES4SDIO_Data2SDIO Data Line2YES5SDIO_Data0SDIO Data Line0YES6SDIO_Data3SDIO Data Line3YES7SDIO_CMDSDIO Command InputYES8WL/BT_HOST_WAKE#Devicewake up Host, Low ActiveYES9SDIO_CLKSDIO Clock InputYES10GNDGroundYES11PDn#Active Low to Power-Down WLANYES12GNDGroundYES13+1.8V1.8V power supply for VIO_SDNC14+3.3V3.3V power supplyYESCONNECTOR SPEC
Page 9/14POWER-UPSEQUENCE TIMINGMECHANICAL
Page 10/14ANTENNA SPECWi-Fi Antenna (Q’ty: 2pcs)
Page 11/14WI-FIANTENNA PHOTO
Page 12/14BT Antenna(Q’ty: 1pcs)
Page 13/14BT ANTENNA PHOTO
Page 14/14BLOCK DIAGRAMEEPROM INFORMATIONBTVendor ID0xTBDProductID0xTBDWI-FIRegion CodeFCC SKU2.4G: CH1-115G: U-NII-1, U-NII-3CC=0x10Vendor ID0xTBDDevice ID0xTBDENVIRONMENTALOPERATINGOperating Temperature: 0 to 70 °C (32 to 158°F)Relative Humidity: 5-90% (non-condensing)STORAGETemperature: -40 to 80 °C (-40 to 176 °F)Relative Humidity: 5-95% (non-condensing)
FCC Statement:Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:˗ġReorient or relocate the receiving antenna.˗ġIncrease the separation between the equipment and receiver.˗ġConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.˗ġConsult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.This device and its antenna(s) must not be co•located with any other transmitters except inaccordance with FCC multi•transmitter product procedures.Refering to the multi•transmitter policy, multiple•transmitter(s) and module(s) can be operated simultaneously without C2PC.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
IMPORTANT NOTE:This module is intended for OEM integrator. The OEM integrator is responsible for thecompliance to all the rules that apply to the product into which this certified RF module isintegrated.Additional testing and certification may be necessary when multiple modules are used.20 cm minimum distance has to be able to be maintained between the antenna and the users for the hostthis module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.USERS MANUAL OF THE END PRODUCT:In the users manual of the end product, the end user has to be informed to keep at least 20 cm separationwith the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio•frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.LABEL OF THE END PRODUCT:The final end product must be labeled in a visible area with the following " Contains TX FCC ID: PPQ-WCBN4503M ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation issubject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.OEM/Integrators Installation Manual The OEM integrator has to be aware not to provide information to the end user regarding how to install orremove this RF module in the user manual of the end product. The user manual of the end product whichis provided by OEM integrators for end users must include the following information in a prominentlocation.1. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- locatedor operating in conjunction with any other antenna or transmitter, except in accordance with FCC multiˢtransmitter product transmitter product procedures.It is the responsibility of the professional installer to ensure that the system.2. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with thisdevice.3. The regulatory label on the final system must include the statement: “Contains FCC ID: PPQ-WCBN4503M “.
OEM Integrator ChecklistThe party below will implement the LITE-ON Module in host systems in accordance with the instructions specified in this document and the documents referenced herein.1. The OEM integrator will ensure the Module is integrated in a host systems using only the approved antenna model(s) described in this document.2. The OEM integrator will ensure the antenna placement inside the host system will maintain the required spacing to end user for RF Exposure compliance, as specified in this document.3. If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet FCC collocation rules.4. The OEM integrator will ensure end user documentation will contain the specified regulatory wording and ensure the host system and the Module itself are labeled as specified in this document.5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document.LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above instructions. You may contact LITE-ON with any questions concerning this document or the responsibilities of the OEM integrator.
IC Statement:This device complies with Industry Canada license•exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.Pour les produits disponibles aux États•Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible.This device and its antenna(s) must not be co•located with any other transmitters except inaccordance with IC multi•transmitter product procedures.Refering to the multi•transmitter policy, multiple•transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change.Cet appareil et son antenne (s) ne doit pas être co•localisés ou fonctionnement en association avec une autre antenne ou transmetteur.The device for operation in the band 5150-5250 MHz is only for indoor use to reduce thepotential for harmful interference to co•channel mobile satellite systems.les dispositifs fonctionnant dans la bande 5150•5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.The maximum antenna gain permitted for devices in the band 5725•5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point•to•point andnon•point•to•point operation as appropriate.le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725•5850 MHz)doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.Dynamic Frequency Selection (DFS) for devices operating in the bands 5250• 5350 MHz,5470•5600 MHz and 5650•5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes5250•5350 MHz, 5470•5600 MHz et 5650•5725 MHz.The maximum antenna gain permitted for devices in the bands 5250•5350 MHz and 5470•5725 MHz shallbe such that the equipment still complies with the e.i.r.p. limit.le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250•5350 MHz et5470•5725 MHz doit se conformer à la limite de p.i.r.e.Users should also be advised that high•power radars are allocated as primary users (i.e. priority users) of the bands 5250•5350 MHz and 5650•5850 MHz and that these radars could cause interference and/or damage to LE•LAN devices.De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de hautepuissance sont désignés utilisateurs principaux (c.•à•d., qu’ils ont la priorité) pour les bandes5250•5350 MHz et 5650•5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN•EL.Pour une utilisation en intérieur uniquement.IMPORTANT NOTE:IC Radiation Exposure Statement:This equipment complies with IC RSS•102 radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance 20 cmbetween the radiator & your body.Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour unenvironnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.This radio transmitter (IC: 4491A-WCBN4503M) has been approved by Industry Canada tooperate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Le présent émetteur radio (IC: 4491A-WCBN4503M) a été approuvé par Industrie Canada pour fonctionneravec les types d'antenne énumérés ci•dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
This module is intended for OEM integrator. The OEM integrator is still responsible for the ICcompliance requirement of the end product, which integrates this module.Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.USERS MANUAL OF THE END PRODUCT:In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio•frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.LABEL OF THE END PRODUCT:The final end product must be labeled in a visible area with the following " Contains TX IC: 4491A-WCBN4503M ".

Navigation menu