LITE ON TECHNOLOGY WCBN4507R Wi-Fi, BT, USB Combo Module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. Wi-Fi, BT, USB Combo Module LiteOn Technology Corp

User Manual

Page 1/11 PRODUCT SPECIFICATION Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.1LE) USB Combo Module WCBN4507R MediaTek MT7662U Version 1.1 Change History Revision Date Author Change List Version 1.0 2015/04/10 Ben J Chen Preliminary Version 1.1 2015/05/20 Ben J Chen Update Mechanical Update Label Drawing * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
Page 2/11 PRODUCT SPECIFICATION Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.1LE) USB Combo Module WCBN4507R MediaTek MT7662U Version 1.1 Networking B.U. Lite-on Technology Corporation 4F, No. 90, Chien 1 Rd., Chung Ho, New Taipei City 235, Taiwan, R.O.C. Customer Approval: (Signature) (Title) (Company) (Date) (Please Sign Back by FAX. For Confirming the Spec Only, not an Official Agreement for OEM/ODM Business)
Page 4/11 PRODUCT FEATURES BT FEATURE:  Bluetooth V4.1 LE system Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1 and 3.0+HS  Bluetooth Class 1 transmission power  Best-in-class BT/Wi-Fi coexistence performance  Support for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function  Support for SCATTERNET and up to piconets simultaneously with background inquiry/page scan  Support wide-band speech and hardware accelerated SBC codec for A2DP streaming  Support Wake On Bluetooth WI-FI FEATURE:  Operate at ISM frequency Band (2.4/5GHz)  IEEE Standards Support, 802.11a ,802.11b, 802.11g, 802.11n and 802.11ac  Support for both 20 MHz/40 MHz channel width in 2.4GHz and 20 MHz/40 MHz/80MHz channel width in 5GHz  Enterprise level security supporting: WPS2.0,WAPI, WPA, WPA2  Dual-stream IEEE 802.11ac support for 80MHz channels provides PHY layer rates up to 867Mbps  QoS support of WFA WMM, WMMPS  Support for WI-Fi Direct  Support Wake On WLAN COMMON FEATURE:  MT7662U is a single chip integrated IEEE 802.11 a/b/g/n/ac and Bluetooth 4.1LE with a single USB interface  PA, LNA, and T/R switch integration for Wi-Fi and Bluetooth  Best-in-class active and idle power consumption performance  Fully compliance with USB v2.0 specification  Support OS: Linux based  RoHS compliance  Low Halogen compliance
Page 5/11 PRODUCT SPECIFICATIONS MAIN CHIPSET MediaTek MT7662U FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V4.0LE Bus Interface USB2.0 Data Rate 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power +4 ≤ Output Power ≤ +10dBm; Class 1 Device Receiver Sensitivity < 0.1% BER at -80dBm Wi-Fi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Bus Interface USB2.0 Data Rate 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz 802.11ac: MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz MCS 0 to 9 for HT80MHz Media Access Control CSMA/CA with ACK Modulation Technique 802.11a: 64QAM, 16QAM, QPSK, BPSK 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK 802.11ac: 256QAM, 64QAM, 16QAM, QPSK, BPSK
Page 6/11 Network Architecture Ad-hoc mode (Peer-to-Peer) Infrastructure mode Operation Channel 2.4GHz 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 5GHz 21: USA 19: EU 8: Japan Frequency Range 802.11bg 2.400 ~ 2.4835 GHz 802.11a/ac 5.15 ~ 5.85 GHz Transmit Output Power – 2x2 (Tolerance: ±1.5dBm) 802.11a: 13 dBm@6Mbps 13 dBm@54Mbps 802.11b: 15 dBm@1Mbps 15 dBm@11Mbps 802.11g: 14 dBm@6Mbps 14 dBm@54Mbps 802.11n(2.4G): 20MHz: 14 dBm@MCS0 14 dBm@MCS7 40MHz: 12 dBm@MCS0 12 dBm@MCS7 802.11n(5G): 20MHz: 13 dBm@MCS0 13 dBm@MCS7 40MHz: 11 dBm@MCS0 11 dBm@MCS7 802.11ac: 20MHz: 11 dBm@MCS0 11 dBm@MCS8 40MHz: 11 dBm@MCS0 11 dBm@MCS8 11 dBm@MCS9 80MHz: 11 dBm@MCS0 11 dBm@MCS8 11 dBm@MCS9 Receiver Sensitivity 802.11a: -86 dBm@6Mbps -70 dBm@54Mbps 802.11b: -88 dBm@1Mbps -82 dBm@11Mbps 802.11g: -86 dBm@6Mbps
Page 7/11 -71 dBm@54Mbps 802.11n: 2.4G/5G 20MHz -86 dBm@MCS0 -70 dBm@MCS7 -68 dBm@MCS15 40MHz -83 dBm@MCS0 -67 dBm@MCS7 -65 dBm@MCS15 802.11ac: 20MHz -64 dBm@MCS8 40MHz -62 dBm@MCS8 -59 dBm@MCS9 80MHz -59 dBm@MCS8 -56 dBm@MCS9 Security WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X, IEEE 802.11i Common Function Operating Voltage 5 V ±5% I/O supply voltage Power Consumption TX Mode: TBD mA RX Mode: TBD mA Standby Mode: WiFi+BT: TBD mA WiFi only: TBD mA BT only: TBD mA Disable Model: TBD mA Antenna Type Triple U.FL connectors for plugging WiFi&BT external antenna
Page 8/11 PIN ASSIGMENT Pin. Pin Define Pin. Pin Define 1 GND 2 GND 3 D- 4 WOW 5 D+ 6 RESET# 7 GND 8 VCC 9 WOB 10 VCC 11 GND 12 GND Top View USB CONNECTOR SPEC
Page 10/11 U.FL CONNECTOR SPEC LABEL DRAWING
Page 11/11 EEPROM INFORMATION BT Vendor ID 0x0E8D Product ID 0x7662 WI-FI Reg Domain World Wide 2.4G/5G Read from registry; Control by driver Offset 0x38 for 5G: 0xFF Offset 0x39 for 2.4G: 0xFF Vendor ID 0x0E8D Device ID 0x7662 ENVIRONMENTAL OPERATING Operating Temperature: 0 to 70 C (32 to 158 F) Relative Humidity: 5-90% (non-condensing) STORAGE Temperature: -40 to 80 C (-40 to 176 F) Relative Humidity: 5-95% (non-condensing)
FCC WARING STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC RF Radiation Exposure Statement: 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interference to cochannel MSS operations. Information to OEM integratorThe OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 1. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product transmitter product procedures.2. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device.3. The regulatory label on the final system must include the statement: “Contains FCC ID: PPQ-WCBN4507R“.4. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented twoways authentication between module and the host system.5. If the end product integrating this module is going to be operated in 5.15 ~5.25GHz frequency range, the warning statement in the user manual of the end product should include the restriction of operating this device in indoor could void the user’s authority to operate the equipment.
IC WARING STATEMENTCanada, Industry Canada (IC) NoticesThis Class B digital apparatus complies with Canadian ICES-003 and RSS-247.Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device.Canada, avis d'Industry Canada (IC)Cet appareil numerique de classe B est conforme aux normes canadiennes ICES-003 etRSS-247.IC Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doitpas causer d'interference et (2) cet appareil doit accepter toute interference, notammentles interferences qui peuvent affecter son fonctionnement.Radio Frequency (RF) Exposure InformationThe radiated output power of the Wireless Device is below the Industry Canada (IC)radio frequency exposure limits. The Wireless Device should be used in such a mannersuch that the potential for human contact during normal operation is minimized.This device has also been evaluated and shown compliant with the IC RF Exposurelimits under mobile exposure conditions. (antennas are greater than 20cm from aperson's body).Informations concernant l'exposition aux frequences radio (RF)La puissance de sortie emise par l’appareil de sans fil est inferieure a la limited'exposition aux frequences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de facon a minimiser les contacts humains lors du fonctionnement normal.Ce peripherique a egalement ete evalue et demontre conforme aux limites d'expositionaux RF d'IC dans des conditions d'exposition a des appareils mobiles (les antennes sesituent a moins de 20 cm du corps d'une personne).Host device labeling requirement in accordance with RSP-100 Section 7.2:The host device shall be properly labeled to identify the modules within the host device.The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device; otherwise, the host device must be labeled to display the Industry Canada certification number for the module, preceded by the words "Contains transmitter module", or the word "Contains", or similar wording expressing the same meaning, as follows:Contains transmitter module IC: 4491A-WCBN4507Rwhere 4491A-WCBN4507R is the module’s certification number
IC WARING STATEMENTi. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;ii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;iii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; andiv.the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.High power radars are allocated as primary users (meaning they have priority) of5250-5350 MHz and 5650-5850 MHz bands and these radars could cause interferenceand/or damage to LE-LAN (Licence-Exempt Local Area Network) devices.

Navigation menu