LITE ON TECHNOLOGY WCBN4511R WLAN + BT Combo Module User Manual 05 Revise

Download:
Mirror Download [FCC.gov]
Document ID	3113090
Application ID	suf0H+CNLZD5Xp9JhZU/cg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.86kB (673266 bits)
Date Submitted	2016-08-26 00:00:00
Date Available	2016-08-26 00:00:00
Creation Date	2016-08-23 06:27:55
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2016-08-23 06:35:10
Document Title	Microsoft Word - 05.User manual(Revise)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	User

USER
R MANU
UAL
WLAN
+B
BT Combo Module
Model Nam
me: WCB
BN4511R
Liteon P/N
Hiisense P//N
AAZ1
100235D0
WCB
BN4511R(62)
WCBN4
4511R(62
2‐WOB)
WCB
BN4511R(32)
WCB
BN4511R(12)
AAZ1
100238D0
AAZ100233D0
AAZ100310D0
Version 1.2
Autthor: Kaysa Leee
Change H
History
Date
Author
Change List
Version 11.0
2015
5 / 10 / 10
Kaysa Lee
Initial rele
ease
Version 11.1
2015
5 / 11 / 09
Kaysa Lee
Add VID/PID informatio
on
Version 11.2
2016
6 / 04 / 21
Kaysa Lee
Add MT7612 informatiion, update PCCB to 10pin design
Version 11.3
2016
6 / 05 / 23
Kaysa Lee
Update BT power = 6dBm
Revision
* This d
document con
ntains confiden
ntial proprietaary informatio
on and is prop
perty of LTC. Th
The contents of
o this
do
ocument shou
uld not be discclosed to unauuthorized perssons without the
t written coonsent of LTC.
WCBN451
11R
Page 1/8
2016/5
5/23
CONTENT
1 PROD
DUCT OVERVIEEW ......................................................................................................................... 3
1.1
DEESCRIPTION ................................................................................................................................ 3
1.2
FEEATURES ..................................................................................................................................... 3
1.3
GEENERAL SPECIIFICATIONS ............................................................................................................ 3
1.4
BO
OARD OUTLIN
NE ........................................................................................................................... 5
1.5
SH
HIELDING .................................................................................................................................... 5
1.6
WTB USB I/F CO
ONNECTOR(1.25MM PITCH ) ............................................................................... 6
1.7
PIN CONFIGURA
ATION.................................................................................................................... 6
2 APPEA
ARANCE, MAR
RKING .................................................................................................................... 7
2.1
AP
PPEARANCE ................................................................................................................................ 7
2.2
LA
ABEL ............................................................................................................................................ 7
3 PACKA
AGE............................................................................................................................................. 8
3.1
PA
ACKING SPEC .............................................................................................................................. 8
3.2
TR
RAY SPEC ..................................................................................................................................... 8
3.3
CA
ARTON LABEL.............................................................................................................................. 8
4 USB V
VID/ PID ....................................................................................................................................... 8
WCBN451
11R
Page 2/8
2016/5
5/23
1 PRODU
UCT OVERVIEW
1.1 DESCRIPTION
WCBN4511R is a WLAN +BT Combo
moduule which using MTK Chip
pset MT76622TU
1.2 FEEATURES
 Operate at 2.4
4GHz / 5GHz band
 8666Mbps PHYY Rate Support
 2TT2R Mode
 USSB 2.0 suppo
ort for date rates up to 122Mbps full sp
peed and 480Mbps high speed
 IEEE standards support: IE
EEE 802.11a//b/g and 802.11n
 8002.11i‐ WEP 64/128, AES, TKIP
 Ro
oHS compliance
 Lo
ow Halogen compliance
1.3 GENERAL SPEECIFICATION
NS
Maain Chipset
MT76
662TU
Standard
IEEE 802.11ac/b/g/
/n , Bluetooth 4.2
Buss Interface
USB 2.0
Forrm Factor
40mm
m x 46.5mm x 6.4mm
Weeight
Datta Rate
WiFi:
802.11b:
CCK,
DQPSK, D
DBPSK
802.11a, 802.111g:
64QAM,
16QA
AM, QPSK, BP
PSK
802.11n:
64QAM,
16QA
AM, QPSK, BP
PSK
802.11ac:
256QAM,
64Q
QAM, 16QAM, QPSK, BPSK
Blueto
ooth:
GFSK, π/4‐DQPPSK and 8‐DPSSK
Frequency Ran
nge
2.400 ~ 2.4835 GHzz
5.150 ~ 5.85GHz
WiFi:
Max.) : ‐85dBm
m , (Typical) : ‐89.5dBm (PERR<8%)
11b @ 11Mbps: (M
Recceive Sensittivity 11g @ 54Mbps: (M
Max.) : ‐69dBm
m , (Typical) : ‐7
76dBm (PER<<10%)
11n @ MCS7 (2.4g HT20): (Max.) : ‐67dBm , (T
Typical) : ‐74.55dBm (PER<10%)
11n @ MCS7 (5g HTT20): (Max.) : ‐67dBm , (Typical) : ‐73.5ddBm (PER<10%
%)
11n @ MCS7 (5g HTT40): (Max.) : ‐64dBm , (Typical) : ‐70dBm
m (PER<10%)
Blueto
ooth:
1DH5 BDR: (Max.): ‐86 dBm , (Tyypical): ‐95.5 dBm
(BER < 0..1%)
2DH5 EDR: (Max.): ‐86 dBm , (Tyypical): ‐92.5 dBm
(BER < 0..01%)
3DH5 EDR: (Max.): ‐80 dBm , (Tyypical): ‐86 dBm (BER < 0.100%)
‐90dB
Bm , (Typical): ‐97dbBm (PER<30.8%)
BLE : (Max.):
WCBN451
11R
Page 3/8
2016/5
5/23
Tem
mperature &
Hum
midity
Normal Test Condittion: 25 +/‐ 2d
deg.C , 65 +/‐ 2% RH
Opera
ating: ‐10 to 770 deg.C
Storagge: ‐40 to 85 ddeg.C
Opeerating Voltage 5V ±10% I/O supplyy voltage
Currrent
Conssumption
Anttenna Type
WCBN451
11R
Metalllic Antenna x 2 (WiFi) + IPEEX MHF RF con
nnector x 1 (BBT)
Page 4/8
2016/5
5/23
1.4 BOARD OUTLLINE
1.5 SHHIELDING
WCBN451
11R
Page 5/8
2016/5
5/23
1.6 W
WTB USB I//F CONNECTTOR(1.25MM
M PITCH)
9pin
Man
nufacturer : ACES
Partt Number : 50271‐009‐‐0N‐001
1.7 PIN CONFIGU
URATION
Pin
100
WCBN451
11R
Name
BT_D
DEV_WAKE
BT_HO
OST_WAKE
+5V
USB_D‐
USB_D+
GND
GND
3D
D_SYNC
RST_N
WLAN__DEV_WAKE
Page 6/8
2016/5
5/23
2 Appeaarance, Marking
2.1 Appearance
Top
Botttom
2.2 Label
WCBN451
11R
Page 7/8
2016/5
5/23
3 Packaage
3.1 Packing Spec
3.2 Tray Spec
3.3 Carton Laabel
VID/ PID
4 USB V
WCB
BN4511R(662)
VID
0x0E8D
PID
0x76A0
WCB
BN4511R(332)
VID
0x0E8D
PID
0x76A1
WCB
BN4511R(112)
VID
0x0E8D
PID
0x7612
WCBN451
11R
Page 8/8
2016/5
5/23
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co‐located with any other transmitters except in
accordance with FCC multi‐transmitter product procedures.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20
cm between the radiator & your body.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the
compliance to all the rules that apply to the product into which this certified RF module is
integrated.
Additional testing and certification may be necessary when multiple modules are used.
20 cm minimum distance has to be able to be maintained between the antenna and the
users for the host this module is integrated into. Under such configuration, the FCC radiation
exposure limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20
cm separation with the antenna while this end product is installed and operated. The end
user has to be informed that the FCC radio‐frequency exposure guidelines for an
uncontrolled environment can be satisfied. The end user has to also be informed that any
changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment. If the size of the end product is smaller than 8x10cm,
then additional FCC part 15.19 statement is required to be available in the users manual:
This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC
ID: PPQ‐WCBN4511R ". If the size of the end product is larger than 8x10cm, then the
following FCC part 15.19 statement has to also be available on the label: This device
complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
OEM Integrator Checklist
The party below will implement the LITE‐ON Module in host systems in accordance with the
instructions specified in this document and the documents referenced herein.
1. The OEM integrator will ensure the Module is integrated in a host systems using only the
approved antenna model(s) described in this document.
BT：Walsin / RFMTA400536IMAB301 / PIFA Antenna / Gain: 3.79dBi
2.4G：LITE‐ON / WCBN4511R / PIFA Antenna / ANT‐L Gain: 2.54dBi, ANT‐R Gain: 0.93dBi
5G：LITE‐ON / WCBN4511R / PIFA Antenna / ANT‐L Gain: 2.94dBi, ANT‐R Gain: 3.35dBi
2. The OEM integrator will ensure the antenna placement inside the host system will
maintain the required spacing to end user for RF Exposure compliance, as specified in this
document.
3. If other radios are integrated inside the host with the LITE‐ON Module, the OEM
integrator will contact its test lab, TCB or LITE‐ON to determine if additional FCC compliance
evaluation is required to meet FCC collocation rules.
4. The OEM integrator will ensure end user documentation will contain the specified
regulatory wording and ensure the host system and the Module itself are labeled as
specified in this document.
5. The OEM integrator will ensure the Module is programmed in the factory with compliant
transmit power not exceeding the levels specified in this document.
LITE‐ON requests that the OEM integrator acknowledge its receipt of this document and the
above instructions. You may contact LITE‐ON with any questions concerning this document
or the responsibilities of the OEM integrator.
IC Statement:
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
Pour les produits disponibles aux États‐Unis / Canada du marché, seul le canal 1 à 11
peuvent être exploités. Sélection d'autres canaux n'est pas possible.
This device and its antenna(s) must not be co‐located with any other transmitters except in
accordance with IC multi‐transmitter product procedures.
Refering to the multi‐transmitter policy, multiple‐transmitter(s) and module(s) can be
operated simultaneously without reassessment permissive change.
Cet appareil et son antenne (s) ne doit pas être co‐localisés ou fonctionnement en
association avec une autre antenne ou transmetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co‐channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150‐5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the band 5725‐5850 MHz shall be such
that the equipment still complies with the e.i.r.p. limits specified for point‐to‐point and
non‐point‐to‐point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725‐5850 MHz)
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non
point à point, selon le cas.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250‐ 5350 MHz,
5470‐5600 MHz and 5650‐5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes
5250‐5350 MHz, 5470‐5600 MHz et 5650‐5725 MHz.
The maximum antenna gain permitted for devices in the bands 5250‐5350 MHz and
5470‐5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250‐5350 MHz et
5470‐5725 MHz doit se conformer à la limite de p.i.r.e.
Users should also be advised that high‐power radars are allocated as primary users (i.e.
priority users) of the bands 5250‐5350 MHz and 5650‐5850 MHz and that these radars could
cause interference and/or damage to LE‐LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute
puissance sont désignés utilisateurs principaux (c.‐à‐d., qu’ils ont la priorité) pour les bandes
5250‐5350 MHz et 5650‐5850 MHz et que ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN‐EL.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum distance 20
cm
between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum
de 20 cm de distance entre la source de rayonnement et votre corps.
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20
cm separation with the antenna while this end product is installed and operated. The end
user has to be informed that the IC radio‐frequency exposure guidelines for an uncontrolled
environment can be satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC:
4491A‐WCBN4511R ".

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : User
Create Date                     : 2016:08:23 06:27:55+08:00
Modify Date                     : 2016:08:23 06:35:10+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:08:23 06:35:10+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 05.User manual(Revise)
Creator                         : User
Document ID                     : uuid:3388dae3-0990-4771-8bfd-98ecfa9ec7df
Instance ID                     : uuid:1020f2bd-7b05-4a48-9ba0-cea89caf6e23
Page Count                      : 14

EXIF Metadata provided by EXIF.tools