LITE ON TECHNOLOGY WCBN4511R12 WLAN Module User Manual 05 Revise
LITE-ON Technology Corp. WLAN Module 05 Revise
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3151249 |
| Application ID | ruTCoHA69otnFfSCyqRt4g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 71.98kB (899781 bits) |
| Date Submitted | 2016-09-29 00:00:00 |
| Date Available | 2016-09-29 00:00:00 |
| Creation Date | 2016-09-22 20:07:02 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2016-09-22 20:11:20 |
| Document Title | Microsoft Word - 05.User manual(Revise) |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | User |
User Manu ual WLA AN Module Mod del Namee: WCBN N4511R(1 12) Liiteon P/N AA AZ100310D D0 Version 1.2 Autthor: Kaysa Leee Change H History Date Author Change List Version 11.0 2015 5 / 10 / 10 Kaysa Lee Initial rele ease Version 11.1 2015 5 / 11 / 09 Kaysa Lee Add VID/PID informatio on Version 11.2 2016 6 / 08 / 01 Kaysa Lee Update Product Picture Revision * This d document con ntains confiden ntial proprietaary informatio on and is prop perty of LTC. Th The contents of o this do ocument shou uld not be discclosed to unauuthorized perssons without the t written coonsent of LTC. WCBN451 11R(12) Page 1/8 2016 6/8/1 CONTENT 1 PROD DUCT OVERVIEEW ......................................................................................................................... 3 1.1 DEESCRIPTION ................................................................................................................................ 3 1.2 FEEATURES ..................................................................................................................................... 3 1.3 GEENERAL SPECIIFICATIONS ............................................................................................................ 3 1.4 BO OARD OUTLIN NE ........................................................................................................................... 5 1.5 SH HIELDING .................................................................................................................................... 5 1.6 WTB USB I/F CO ONNECTOR(1.25MM PITCH ) ............................................................................... 6 1.7 PIN CONFIGURA ATION.................................................................................................................... 7 2 APPEA ARANCE, MAR RKING .................................................................................................................... 7 2.1 AP PPEARANCE ................................................................................................................................ 7 2.2 LA ABEL ............................................................................................................................................ 7 3 PACKA AGE............................................................................................................................................. 8 3.1 PA ACKING SPEC .............................................................................................................................. 8 4 USB V VID/ PID ....................................................................................................................................... 8 WCBN451 11R(12) Page 2/8 2016 6/8/1 1 PRODU UCT OVERVIEW 1.1 DESCRIPTION WCBN4511R is a 2x2 11ac WLLAN module which usingg MTK Chipse et MT7612U 1.2 FEEATURES Operate at 2.4 4GHz / 5GHz band 8666Mbps PHYY Rate Support 2TT2R Mode USSB 2.0 suppo ort for date rates up to 122Mbps full sp peed and 480Mbps high speed IEEE standards support: IE EEE 802.11a//b/g and 802.11n 8002.11i‐ WEP 64/128, AES, TKIP Ro oHS compliance Lo ow Halogen compliance 1.3 GENERAL SPEECIFICATION NS Maain Chipset MT76 612UN Standard IEEE 802.11ac/b/g/ /n Buss Interface USB 2.0 Forrm Factor 40mm m x 46.5mm x 6.4mm Datta Rate Frequency Ran nge WiFi: 802.11b: CCK, DQPSK, D DBPSK 802.11a, 802.111g: 64QAM, 16QA AM, QPSK, BP PSK 802.11n: 64QAM, 16QA AM, QPSK, BP PSK 802.11ac: 256QAM, 64Q QAM, 16QAM, QPSK, BPSK 2.400 ~ 2.4835 GHzz 5.150 ~ 5.85GHz WiFi: 11b @ 11Mbps: (M Max.) : ‐85dBm m , (Typical) : ‐89.5dBm (PERR<8%) 11g @ 54Mbps: (M Max.) : ‐69dBm m , (Typical) : ‐7 76dBm (PER<<10%) Recceive Sensittivity 11n @ MCS7 (2.4g HT20): (Max.) : ‐67dBm , (TTypical) : ‐74.55dBm (PER<10%) 11n @ MCS7 (5g HTT20): (Max.) : ‐67dBm , (Typical) : ‐73.5ddBm (PER<10% %) 11n @ MCS7 (5g HTT40): (Max.) : ‐64dBm , (Typical) : ‐70dBm m (PER<10%) Tem mperature & Hum midity WCBN451 11R(12) Normal Test Condittion: 25 +/‐ 2d deg.C , 65 +/‐ 2% RH ating: ‐10 to 770 deg.C Opera Storagge: ‐40 to 85 ddeg.C Page 3/8 2016 6/8/1 Opeerating Voltage 5V ±10% I/O supplyy voltage Anttenna Type WCBN451 11R(12) Metalllic Antenna x 2 (WiFi) Page 4/8 2016 6/8/1 1.4 BOARD OUTLLINE 1.5 SHHIELDING WCBN451 11R(12) Page 5/8 2016 6/8/1 1.6 W WTB USB I//F CONNECTTOR(1.25M MM PITCH) WCBN451 11R(12) Page 6/8 2016 6/8/1 1.7 PIN CONFIGU URATION Pin 100 Name WLAN N_REG_ON BT_HO OST_WAKE +5V USB_D‐ USB_D+ GND GND 3D D_SYNC RST_N WLAN__DEV_WAKE descripttion Low Acttive to Disab ble regulato or(5V‐>3.3V V) no use ffor MT7612 5V inputt USB Signnal (D‐) USB Signnal (D+) Ground Ground no use ffor MT7612 IC Resett Input GPPIO to wake e up device 2 Appeaarance, Marking 2.1 Appearance To op Botttom 2.2 Label WCBN451 11R(12) Page 7/8 2016 6/8/1 3 Packaage 3.1 Packing Spec 4 USB V VID/ PID WCB BN4511R(112) VID 0x0E8D PID 0x7612 WCBN451 11R(12) Page 8/8 2016 6/8/1 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co‐located with any other transmitters except in accordance with FCC multi‐transmitter product procedures. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio‐frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: PPQ‐WCBN4511R12 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. OEM Integrator Checklist The party below will implement the LITE‐ON Module in host systems in accordance with the instructions specified in this document and the documents referenced herein. 1. The OEM integrator will ensure the Module is integrated in a host systems using only the approved antenna model(s) described in this document. 2.4G：LITE‐ON / WCBN4511R / PIFA Antenna / ANT‐L Gain: 2.54dBi, ANT‐R Gain: 0.93dBi 5G：LITE‐ON / WCBN4511R / PIFA Antenna / ANT‐L Gain: 2.94dBi, ANT‐R Gain: 3.35dBi 2. The OEM integrator will ensure the antenna placement inside the host system will maintain the required spacing to end user for RF Exposure compliance, as specified in this document. 3. If other radios are integrated inside the host with the LITE‐ON Module, the OEM integrator will contact its test lab, TCB or LITE‐ON to determine if additional FCC compliance evaluation is required to meet FCC collocation rules. 4. The OEM integrator will ensure end user documentation will contain the specified regulatory wording and ensure the host system and the Module itself are labeled as specified in this document. 5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document. LITE‐ON requests that the OEM integrator acknowledge its receipt of this document and the above instructions. You may contact LITE‐ON with any questions concerning this document or the responsibilities of the OEM integrator. IC Statement: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux États‐Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible. This device and its antenna(s) must not be co‐located with any other transmitters except in accordance with IC multi‐transmitter product procedures. Refering to the multi‐transmitter policy, multiple‐transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas être co‐localisés ou fonctionnement en association avec une autre antenne ou transmetteur. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co‐channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150‐5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. The maximum antenna gain permitted for devices in the band 5725‐5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point‐to‐point and non‐point‐to‐point operation as appropriate. le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725‐5850 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. Dynamic Frequency Selection (DFS) for devices operating in the bands 5250‐ 5350 MHz, 5470‐5600 MHz and 5650‐5725 MHz. Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250‐5350 MHz, 5470‐5600 MHz et 5650‐5725 MHz. The maximum antenna gain permitted for devices in the bands 5250‐5350 MHz and 5470‐5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250‐5350 MHz et 5470‐5725 MHz doit se conformer à la limite de p.i.r.e. Users should also be advised that high‐power radars are allocated as primary users (i.e. priority users) of the bands 5250‐5350 MHz and 5650‐5850 MHz and that these radars could cause interference and/or damage to LE‐LAN devices. De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.‐à‐d., qu’ils ont la priorité) pour les bandes 5250‐5350 MHz et 5650‐5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN‐EL. Pour une utilisation en intérieur uniquement. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio‐frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX IC: 4491A‐WCBN4511R12 ".
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : User Create Date : 2016:09:22 20:07:02+08:00 Modify Date : 2016:09:22 20:11:20+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:09:22 20:11:20+08:00 Format : application/pdf Title : Microsoft Word - 05.User manual(Revise) Creator : User Producer : Acrobat Distiller 9.5.5 (Windows) Document ID : uuid:a5f8e3d1-ec8b-424b-9d6c-8ee2e1770a27 Instance ID : uuid:1ff113fc-dfde-4005-889d-0c6895bd6325 Page Count : 14EXIF Metadata provided by EXIF.tools