LITE ON TECHNOLOGY WM6687 Dual-Band 802.11ac 4x4 MIMO PCI Express Mini Card Wireless Network Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3486459
Application ID	3fAXdLwDz10vYaXkv5fEEA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.07kB (113323 bits)
Date Submitted	2017-07-28 00:00:00
Date Available	2017-08-01 00:00:00
Creation Date	2017-07-26 11:26:09
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2017-07-27 16:17:59
Document Title	Microsoft Word - Product Spec_WM6687 20161215_當手冊用_耕興代修改20170704 …
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ElsaLin

User manual
< WM6687>
Dual-Band 802.11ac 4x4 MIMO
PCI Express Mini Card
Wireless Network Adapter
LITE-ON
Version: 1.0.0
This document contains confidential proprietary information and is property of LTC. The contents of
this document should not be disclosed to unauthorized persons without the written consent of LTC.
Product Specification of WM882
Content
Page
Product Description
………………………………………….
Application
………………………………………….
Features
………………………………………….
Product Specifications
………………………………………….
Pin Definition
………….…..……………….………….
Physical & Environment
6.1
PCB Dimension
…………………………
6.2
Operation Temperature & Humidity …………………..…..
6.3
Storage Temperature & Humidity
Certification Requirements
……………..….
……….…..……………….………….
2 / 14
Rev.:1.0.0
Product Specification of WM882
Change History
Version
Revised Date
Editor
1.0.0
2016/12/15
Flora Yu
3 / 14
Content Revised
First Edition (baseline)
Rev.:1.0.0
Product Specification of WM882
1 Product Descriptions
The WM6687 provides ultra-high performance transmission rate in the 2.4G or 5GHz band. It is
backward compatible with the current 802.11a/b/g/n network devices.
2 Application
 Home and/or office wireless networking
 Wireless multimedia
 Wireless extension of existing wired network
3 Features
 IEEE 802.11 a/b/g/n/ac standard compliant
 4x4 MIMO wireless system
 Ultra-high data rate up to 1.7Gbps @5GHz, 256QAM
 Auto fallback data rate under noisy environment
 Support 2.4GHz or 5GHz band operation (dual-band selectable)
 Support WEP ( 64-bit/128-bit ), 802.1x, and WPA/WPA2
 Conformable to industry-standard Mini Card specification
 Independent Tx Power Control on a per channel
4 Product Specifications
Radio Chipset
BCM43465
WLAN Standards
IEEE 802.11a/b/g/n/ac compliant
Antenna connector
U.FL connector
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 11, 5.5, 2 & 1 Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6 Mbps
802.11n :
20 MHz BW: 72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2 Mbps
40 MHz BW: 150, 135, 120, 90, 60, 45, 30, 15 Mbps
802.11ac :
20MHz BW : 86.7, 72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2 Mbps
40MHz BW : 200, 180, 150, 135, 120, 90, 60, 45, 30, 15 Mbps
80MHz BW : 433, 390, 325, 292.5, 260, 195, 130, 97.5, 65, 32.5 Mbps
160MHz BW: 867, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
Data Rate (per stream)
4 / 14
Rev.:1.0.0
Product Specification of WM882
802.11b: CCK(11&5.5 Mbps), DQPSK (2Mbps), DBPSK (1Mbps),
802.11g/n: DBPSK, DQPSK, OFDM, BPSK, QPSK, 16QAM, 64QAM,
256QAM, 1024QAM (proprietary)
Modulation
USA – FCC
Canada – IC
Europe – ETSI
Japan – STD-T66/STD-33m
2412~2462MHz
2412~2462MHz
2412~2472MHz
2412~2484MHz
Frequency Band
5150MHz ~ 5350MHz for US & Canada
5150MHz ~ 5350MHz for Europe
5470MHz ~ 5725MHz for Europe
5030MHz~5091MHz and 5150MHz ~ 5250MHz for Japan
5150MHz ~ 5350MHz for Australia
5470MHz ~ 5725MHz for Australia (except channel 120, 124 and 128)
5725Mhz ~ 5825Mhz for Australia
2.4GHz or 5GHz
Power Consumption
Operation (max.) < 5.6W (estimated)
Security
WEP (64-bit/128-bit), 802.1x
WPA/WPAs (TKIP, AES)
Operating System
Linux
Receive Sensitivity
Data Rates
6 Mbps
54 Mbps
802.11n - 20 MHz
802.11n - 40 MHz
VHT20 MCS 8
VHT40 MCS 9
VHT80 MCS 9
Voltage
3.3 VDC from host (+/- 0.2V)
Operating Frequencies
Receive Sensitivity (min.)
-90 dBm
-71dBm
-89 (MSC 0/8)
-86 (MSC 0/8)
-63
-60
-57
5 Pin Definition
PCIE pin number
Pin definition
PCIE pin number
Pin definition
PCIE_WAKE_L
27
GND
VDD3_3
28
NC
NC
29
GND
GND
30
NC
NC
31
PCIE_RDP
NC
32
NC
PCIE_CLKREQ_L
33
PCIE_RDN
NC
34
GND
GND
35
GND
10
NC
36
NC
11
REFCLKN
37
GND
12
NC
38
NC
13
REFCLKP
39
VDD3_3
5 / 14
Rev.:1.0.0
Product Specification of WM882
14
NC
40
GND
15
GND
41
VDD3_3
16
NC
42
NC
17
NC
43
GND
18
GND
44
LED_WLAN
19
NC
45
NC
20
RF_DISABLE_L
46
NC
21
GND
47
NC
22
PCIE_PERST_L
48
NC
23
TDP
49
NC
24
VDD3_3
50
GND
25
TDN
51
NC
26
GND
52
VDD3_3
6 Physical & Environment
6.1 PCB Dimension:
Standard mPCIe form factor: 30 × 50.95 mm (width × length)
6.2 Operation Temperature & Humidity
Temperature：32℉ to 113℉ (0 ℃ to 45 ℃)
Humidity：10% ~ 90% R.H.
6.3 Storage Temperature& Humidity
Temperature：-4℉ to 158℉ (-20 ℃ to 70 ℃)
Humidity：10% ~ 95% R.H.
Certification Requirements
USA (Non DFS)
6 / 14
Rev.:1.0.0
Product Specification of WM882
USA (DFS)
Canada (IC)
Japan (TELEC)
Note, cert for module slave mode only, system products with/after the module installed/embedded
need to re-cert and under customer’s expense.
7 / 14
Rev.:1.0.0
Product Specification of WM882
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
●
●
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 25 cm between the radiator & your body.
8 / 14
Rev.:1.0.0
Product Specification of WM882
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for
the compliance to all the rules that apply to the product into which this certified RF
module is integrated.
Additional testing and certification may be necessary when multiple modules are
used.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at
least 25 cm separation with the antenna while this end product is installed and
operated. The end user has to be informed that the FCC radio-frequency exposure
guidelines for an uncontrolled environment can be satisfied.
The end user has to also be informed that any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate
this equipment.
If the labelling area is small than the palm of the hand, then additional FCC part
15.19 statement is required to be available in the users manual: This device
complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains
TX FCC ID: PPQ-WM6687 ".
If the labelling area is larger than the palm of the hand, then the following FCC part
15.19 statement has to also be available on the label: This device complies with Part
15 of FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
9 / 14
Rev.:1.0.0
Product Specification of WM882
Antenna list:
Set
Brand
Model Name
(P/N)
Antenna Type
PSA
RFDPA171300SBLB802
Dipole
Antenna
ethertronics
M830520
Ceramic
Antenna
Connector
Gain
(dBi)
Remark
Reversed-SMA Note 1
N/A
Note 1
Connect with
Black Cable or
Grey Cable
Note 1:
Gain (dBi)
Set
Cable loss
True Gain (dBi)
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
4.03
5.4
0.5
0.5
3.53
4.9
1.2
2.2
-0.1
1.1
3.2
0.5
0.9
0.6
2.3
Remark
Black Cable
(Long)
Gray Cable
(Short)
Note 2:
The EUT has two sets of antennas and there are four antennas for each set.
The Set 2 antennas can connect with black and gray cable. After evaluating, gray cable was select as
the representative cable for the test and its data was recorded in this report.
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11
peuvent être exploités. Sélection d'autres canaux n'est pas possible.
10 / 14
Rev.:1.0.0
Product Specification of WM882
This radio transmitter (IC: 4491A-WM6687) has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 4491A-WM6687) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
Antenna list:
Set
Brand
Model Name
(P/N)
Antenna Type
PSA
RFDPA171300SBLB802
Dipole
Antenna
ethertronics
M830520
Ceramic
Antenna
Connector
Gain
(dBi)
Reversed-SMA Note 1
N/A
Note 1
Remark
Connect with
Black Cable or
Grey Cable
Note 1:
Gain (dBi)
Set
Cable loss
True Gain (dBi)
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
4.03
5.4
0.5
0.5
3.53
4.9
1.2
2.2
-0.1
1.1
3.2
0.5
0.9
0.6
2.3
Remark
Black Cable
(Long)
Gray Cable
(Short)
Note 2:
The EUT has two sets of antennas and there are four antennas for each set.
The Set 2 antennas can connect with black and gray cable. After evaluating, gray cable was select as
the representative cable for the test and its data was recorded in this report.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350
MHz, 5470-5600 MHz and 5650-5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes
5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz.
11 / 14
Rev.:1.0.0
Product Specification of WM882
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall
be such that the equipment still complies with the e.i.r.p. limits specified for
point-to-point and non-point-to-point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz)
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point,
selon le cas.
For indoor use only.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 25 cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 25 cm de distance entre la source de
rayonnement et votre corps.
12 / 14
Rev.:1.0.0
Product Specification of WM882
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for
the compliance to all the rules that apply to the product into which this certified RF
module is integrated.
Additional testing and certification may be necessary when multiple modules are
used.
25 cm minimum distance has to be able to be maintained between the antenna and
the users for the host this module is integrated into. Under such configuration, the IC
RSS-102 radiation exposure limits set forth for an population/uncontrolled
environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at
least 25 cm separation with the antenna while this end product is installed and
operated. The end user has to be informed that the IC radio-frequency exposure
guidelines for an uncontrolled environment can be satisfied.
The end user has to also be informed that any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate
this equipment. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains
IC: 4491A-WM6687 ".
The Host Model Number (HMN) must be indicated at any location on the exterior of
the end product or product packaging or product literature which shall be available
with the end product or online.
13 / 14
Rev.:1.0.0
Product Specification of WM882
Japan Statement:
5GHz band (W52, W53): Indoor use only
14 / 14
Rev.:1.0.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : ElsaLin
Create Date                     : 2017:07:26 11:26:09+08:00
Modify Date                     : 2017:07:27 16:17:59+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:07:27 16:17:59+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Product Spec_WM6687 20161215_當手冊用_耕興代修改20170704 …
Creator                         : ElsaLin
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:5fdccc90-ceb5-4a7a-a498-cbc2ce360876
Instance ID                     : uuid:a0d55483-d480-4dcb-b8e3-2595e128371f
Page Count                      : 14

EXIF Metadata provided by EXIF.tools