LITE ON TECHNOLOGY WN3501M Dual Band Wireless Lan Module User Manual LiteOn Technology Corp

Download:
Mirror Download [FCC.gov]
Document ID	3242279
Application ID	2j4NnhIVQmRGFf9D0EVuQg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	71.43kB (892837 bits)
Date Submitted	2016-12-29 00:00:00
Date Available	2017-01-03 00:00:00
Creation Date	2017-12-20 04:18:24
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-20 04:18:24
Document Title	LiteOn Technology Corp.
Document Creator	Microsoft® Word 2010
Document Author:	Tracy Chang

USER MANUAL
802.11n, Dual Band 1T1R Wireless Lan SDIO Module
WN3501M
Marvell 88w8782
Version 1.2
Change History
Revision
Version 1.0
Version 1.1
Date
2014/04/30
2014/09/15
Author
Kaysa Lee
Kaysa Lee
Version 1.2
2016/06/20
Kaysa Lee
Change List
Preliminary
Update Product Picture
Update:
1.Product Picture
Add:
2. 2D drawing
3. Packing drawing
4. FFC Cable Drawing
5. Shielding Drawing
6. MAC Label Drawing
* This document contains confidential proprietary information and is property of LTC. The contents of
this document should not be disclosed to unauthorized persons without the written consent of LTC.
Page 1/11
CONTENT
PRODUCT FEATURES .................................................................................................................... 3
WI-FI FEATURE: ..................................................................................................................................... 3
PRODUCT SPECIFICATIONS ........................................................................................................ 4
MAIN CHIPSET ....................................................................................................................................... 4
FUNCTIONAL SPECIFICATIONS ............................................................................................................... 4
PIN ASSIGNMENT ............................................................................................................................ 5
MECHANICAL .................................................................................................................................. 5
EEPROM INFORMATION .............................................................................................................. 6
ENVIRONMENTAL .......................................................................................................................... 6
OPERATING ............................................................................................................................................ 6
STORAGE................................................................................................................................................ 6
SHIELDING DRAWING ................................................................................................................... 7
MAC LABEL ...................................................................................................................................... 7
FFC CABLE DRAWING ................................................................................................................... 8
POWER UP SEQUENCE .................................................................................................................. 9
POWER DOWN SEQUENCE ........................................................................................................... 9
SDIO INTERFACE ............................................................................................................................ 9
SDIO PROTOCOL TIMING DIAGRAM—NORMAL MODE ......................................................................... 9
SDIO PROTOCOL TIMING DIAGRAM—HIGH SPEED MODE .................................................................. 10
SDIO TIMING DATA ............................................................................................................................ 10
PACKING DRAWING (MODULE + FFC CABLE) .................................................................... 11
Page 2/11
PRODUCT FEATURES
WI-FI FEATURE:





Operate at ISM frequency Band (2.4/5GHz)
IEEE Standards Support, 802.11a,802.11b, 802.11g and 802.11n
Support SDIO, G-SPI, high-speed UART interface
Enterprise level security supporting: WPA, WPA2, WAPI
Support 1 transmission and 1 receiving, transmission rate can up to 150Mbps
(Physical Rate) in downstream and upstream
 Low power consumption
 Support Linux OS based and kernel up to 2.6.x , Android 2.2/3.0
 Support BT Coexistence interface
 RoHS compliance
 Low Halogen compliance
Page 3/11
PRODUCT SPECIFICATIONS
MAIN CHIPSET
Marvell 88w8782
FUNCTIONAL SPECIFICATIONS
Wi-Fi Function
Standard
IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n
Bus Interface
SDIO
Data Rate
802.11b:
11, 5.5, 2, 1 Mbps
802.11a/g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 7 for HT20MHz
MCS 0 to 7 for HT40MHz
Media Access Control
CSMA/CA with ACK
802.11b:
CCK, DQPSK, DBPSK
802.11a/g:
Modulation Techniques
64QAM, 16QAM, QPSK, BPSK
802.11n:
BPSK, QPSK, 16QAM, 64QAM
Ad-hoc mode (Peer-to-Peer)
Network Architecture
Infrastructure mode
WEP 64/128 bit, WPA, WPA2, WAPI, IEEE 802.1x, IEEE
Security
802.11i
Operating Voltage
3.3 V ±10% I/O supply voltage
OS Supported
Linux Based
TX Mode:
11a
11b
11g
11n_HT20
11n_HT40
2.4GHz
362 mA
264 mA
306 mA
280 mA
5GHz
272 mA
317 mA
301 mA
2.4GHz
175 mA
163 mA
181 mA
203 mA
5GHz
183 mA
205 mA
228 mA
RX Mode:
Power Consumption
11a
11b
11g
11n_HT20
11n_HT40
Associated Mode:
2 mA
Un-associated Mode:
Page 4/11
1 mA
Dual Antenna connectors
Antenna Type
PIN ASSIGNMENT
Pin.
Pin Define
Type
Description
GND
RESETTn
Ground
Reset (active low) (internal pull-high)
WLAN_LED
WAKEUP
WLAN LED
Host Wakeup: Host-to-SoC Wakeup (input)
SLP_CLK_In
Sleep Clock Input
SD_CMD
I/O
SDIO Command
10
11
12
13
14
15
SD_D0
SD_D1
SD_D2
SD_D3
GND
SD_CLK
GND
3.3V
PDn
I/O
I/O
I/O
I/O
16
SOC-to-Host
Please keep this pin floating if host don’t need to control it.
Please keep this pin floating if host don’t need to control it.
Please keep this pin floating if host don’t need to control it.
SDIO Data0
SDIO Data1
SDIO Data2
SDIO Data3
Ground
SDIO clock input
Ground
3.3V
Full Power Down (active low)
0 = full power down mode
1 = normal mode
Wake on WLAN (GPIO2) (internal pull-high) (active low)
MECHANICAL
Page 5/11
PRODUCT PICTURE
EEPROM INFORMATION
Reg Domain
FCC
Channels 1-11 with active scan
Vendor ID
0x02DF
Device ID
0x9121
ENVIRONMENTAL
OPERATING
Operating Temperature: 0 to 70 C (32 to 158F)
Relative Humidity: 5-90% (non-condensing)
STORAGE
Temperature: -40 to 80 C (-40 to 176 F)
Relative Humidity: 5-95% (non-condensing)
Page 6/11
SHIELDING DRAWING
MAC LABEL
Page 7/11
FFC CABLE DRAWING
Page 8/11
Power UP Sequence
PDn must remain asserted for a minimum of 1 ms after VDD33 is stable
For auto reference clock detection, the sleep clock (32.768 KHz) must be used and must
be stable before PDn is de-asserted
RESETn should be inactive value (asserted high)
Power Down Sequence

PDn must be turned off simultaneously with or before VDD33
SDIO INTERFACE
SDIO Protocol Timing Diagram—Normal Mode
Page 9/11
SDIO Protocol Timing Diagram—High Speed Mode
SDIO Timing Data
Symbol
Parameter
FPP
Clock Frequency
TWL
Clock Low Time
TWH
Clock High Time
TISU
Input Setup Time
TIH
Input Hold Time
TODLY
TOH
Output Delay Time
Output Hold Time
Condition
Normal
High Speed
Normal
High Speed
Normal
High Speed
Normal
High Speed
Normal
High Speed
High Speed
Page 10/11
Min
10
10
2.5
Typ
Max
25
50
7.33
Units
MHz
MHz
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
PACKING DRAWING (MODULE + FFC CABLE)
Page 11/11
FCC Statement:
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to
all the rules that apply to the product into which this certified RF module is integrated.
Additional testing and certification may be necessary when multiple modules are used.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied.
The end user has to also be informed that any changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate this equipment.
If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
PPQ-WN3501M ".
If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement
has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection
d'autres canaux n'est pas possible.
This device and its antenna(s) must not be co-located with any other transmitters except in
accordance with IC multi-transmitter product procedures.
Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated
simultaneously without reassessment permissive change.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre
antenne ou transmetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant
les mêmes canaux.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600
MHz and 5650-5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600
MHz et 5650-5725 MHz.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
For indoor use only.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm between
the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.
Antenna list:
Ant.
Antenna Type
Ant. R
Ant. L
Gain (dBi)
2.4GHz
5GHz
Printed Antenna
0.6
3.1
Printed Antenna
0.95
3.22
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to
all the rules that apply to the product into which this certified RF module is integrated.
Additional testing and certification may be necessary when multiple modules are used.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied.
The end user has to also be informed that any changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate this equipment. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains IC:
4491A-WN3501M ".
The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or
product packaging or product literature which shall be available with the end product or online.
Japan Statement:
5GHz band (W52, W53): Indoor use only
NCC Statement:
」1)
經型式認證合格之低功率射頻電機，非經許可，公司 商號或使用者均不得擅自變更頻率 加大
功率或變更原設計之特性及功能
」2)
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用 前項合法通信，指依電信法規定作業之無線電通信 低功率射
頻電機須忍受合法通信或工業
科學及醫療用電波輻射性電機設備之干擾
」3) 無線資訊傳輸設備必須具備安全功能，以保護未經授權之一方任意更改軟體進而避免發射機操作於
非經認證之頻率
輸出功率
調變形式或其他射頻參數設定
」4) 無線資訊傳輸設備避免影響附近雷達系統之操作
」5)
本模組於取得認證後將依規定於模組本體標示審驗合格標籤, 並要求平台廠商於平台上標示 本
產品內含射頻模組 CC XX xx LP yyy Z z
Korea Statement:
B 급기기 (가정용 방송통신기자재)
이 기기는 가정용(B 급) 전자파적합기기로서 주로 가정에서 사용하는 것을
지역에서 사용할 수 있습니다.
적으로 하며,
든

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1ebba694-a357-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:17 21:54:56Z
Create Date                     : 2017:07:17 21:54:56Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:1ebba694-a357-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools