LITE ON TECHNOLOGY WN4300R 802.11b/g USB Adapter User Manual
LITE-ON Technology Corp. 802.11b/g USB Adapter
Users Manual
PRODUCT SPECIFICATION 802.11b/g, 54Mbps Wireless LAN USB Module WN4300R Version 1.1 This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC. Change History: Revision Version 1.0 Version 1.1 Date 2006/11/23 2006/11/23 Author: Brian Liu Editor: Brian Liu WN4300R Specification Author Vita Lee Brian Liu Change List Preliminary Wording Modified Approved by: Frank SS Lee Project Leader: Sam Chen Page 1/8 LTC Network Access Confidential 2007/2/1 PRODUCT SPECIFICATION 802.11b/g, 54Mbps Wireless LAN USB Module WN4300R Version 1.1 Networking B.U. Lite-On Technology Corporation 4F, 90, Chien I Rd. Chung-Ho, Taipei Hsien 235, Taiwan, R.O.C. Phone: 886-2-2222-6181 Fax: Contact: 886-2-2222-3882 Product Marketing Mr. Brian Liu #8115 E-mail: brian.liu@liteon.com Customer Approval: (Signature) (Title) (Company) (Date) (Please Sign Back by FAX. For Confirming the Spec Only, not an Official Agreement for OEM/ODM Business) WN4300R Specification Page 2/8 LTC Network Access Confidential 2007/2/1 CONTENT PRODUCT FEATURES ....................................................................................................................4 PRODUCT SPECIFICATIONS........................................................................................................4 MAIN CHIPSET ........................................................................................................................................4 FUNCTIONAL SPECIFICATIONS ...............................................................................................................4 MECHANICAL .........................................................................................................................................5 BLOCK DIAGRAM ...................................................................................................................................6 ENVIRONMENTAL ..........................................................................................................................6 OPERATING ............................................................................................................................................6 STORAGE................................................................................................................................................6 WN4300R Specification Page 3/8 LTC Network Access Confidential 2007/2/1 PRODUCT FEATURES • Operate at ISM frequency bands (2.4GHz) with 54Mbps data rate • USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed • IEEE standards support: IEEE 802.11b, 802.11g • Enterprise level security which can apply WPA2 certification • Rohs compliance • Wi-Fi Multimedia (WMM) supported. WMM is a component of the IEEE 802.11e wireless LAN standard for quality of service (QoS). Product specifications Main chipset Baseband / MAC: Ralink RT2571WF RF: Ralink RT2528L Functional Specifications Standard Bus Interface Data Rate Media Access Control Radio Technology Modulation Techniques Network architecture Operating Channel Frequency Range Transmit Output Power WN4300R Specification IEEE802.11b; IEEE 802.11g; IEEE 802.11i, WMM Universal Serial Bus (USB2.0) 802.11g compliant: 11, 5.5, 2, 1 (DSSS/CCK); 6, 9, 12, 18, 24, 36, 48, 54 (OFDM) Mbps data rates CSMA/CA with ACK 802.11b: DSSS (Direct Sequence Spread Spectrum) / CCK 802.11g: DSSS/CCK, OFDM (Orthogonal Frequency Division Multiplexing) 802.11g 802.11b OFDM: DSSS: BPSK @ 6, 9 Mbps CCK @ 11, 5.5 Mbps QPSK @ 12, 18 Mbps DQPSK @ 2 Mbps 16-QAM @ 24, 36 Mbps DBPSK @ 1 Mbps 64-QAM @ 48, 54 Mbps Ad-hoc mode (Peer-to-Peer ) Infrastructure mode 802.11b & g 11: (Ch. 1-11) – N. America 14: (Ch. 1-14) – Japan 13: (Ch. 1-13) – Europe ETSI 802.11 b & g 2.412 ~ 2.462 GHz – N. America 2.412 ~ 2.484 GHz – Japan 2.412 ~ 2.472 GHz – Europe ETSI 802.11b 802.11 g 17 +-1.5 dBm 15 +-1.5 dBm Page 4/8 LTC Network Access Confidential 2007/2/1 Receiver Sensitivity 802.11b @FER<8% 11 Mbps: -84 dBm 5.5 Mbps: -85 dBm 2 Mbps: -89 dBm 1 Mbps: -92 dBm Security Operating Voltage OS supported 64-bit, 128-bit, 256-bit WEP, TKIP, AES, WPA, WPA2 5 V ±5% I/O supply voltage • Windows XP Pro/Home • Windows XP SP1 Pro/Home • Windows XP SP2 Pro/Home • Windows XP 64-bit • Windows Media Center Edition • Windows Vista (supported Q2, 2007) 802.11b 802.11g Rx: 236 mA Rx: 236 mA Tx: 333 mA Tx: 300 mA Standby: 200 mA Standby: 200 mA Dual antenna connector Power Consumption Antenna Type 802.11 g @PER<10% 54 Mbps: -70 dBm 48 Mbps: -71 dBm 36 Mbps: -76 dBm 24 Mbps: -80 dBm 18 Mbps: -83 dBm 12 Mbps: -86 dBm 9 Mbps: -87 dBm 6 Mbps: -87 dBm *Enviromental factors dependent Mechanical Dimensions (Length x Width x Height): 78.2 mm x 14 mm x mm Weight: g ( oz) Product ID WN4300R Specification Page 5/8 LTC Network Access Confidential 2007/2/1 Block Diagram TBD ENVIRONMENTAL Operating Operating Temperature: 0 to 45 °C (32 to 113 °F) Relative Humidity: 5-90% (non-condensing) Storage Temperature: -20 to 70 °C (-4 to 158 °F) Relevant Humidity: 5-95% (non-condensing) WN4300R Specification Page 6/8 LTC Network Access Confidential 2007/2/1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users are not been provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. End Product Labelling: WN4300R Specification Page 7/8 LTC Network Access Confidential 2007/2/1 The final end product must be labeled in a visible area with the following " Contains TX FCC ID: PPQWN4300R ". If the size of the end product is larger than the palm of the hand, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Notice to Users Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with the antennas listed below, and having a maximum gain of 3dBi. Antennas not included in this list or having a gain greater than 3dBi are strictly prohibited for use with this device. The required antenna impedance is 50ohms. Antenna Ant. Brand Antenna Type Connector Gain (dBi) Wistron PIFA (INTERNAL) UFL 3.00 Wistron Dipole (W/O cable)-XCC Reversed-SMA 2.00 Wistron Dipole (With 1m cable)-XCD Reversed-SMA 2.00 Joymax Dipole (With 1m cable) Reversed-SMA 1.95 Internal cable for Dipole Antenna 26cm-1.37Ø 26cm-1.13Ø 9.5cm-1.37Ø 9.5cm-1.13Ø WN4300R Specification Page 8/8 LTC Network Access Confidential 2007/2/1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2007:02:01 14:42:25+08:00 Modify Date : 2007:02:01 14:42:57+08:00 Metadata Date : 2007:02:01 14:42:57+08:00 Format : application/pdf Title : untitled Document ID : uuid:85b2d29a-63b8-44ea-babe-5637696a431e Instance ID : uuid:12a181d3-503b-4aba-b3fc-c115ba6aa690 Page Count : 8EXIF Metadata provided by EXIF.tools