LITE ON TECHNOLOGY WN4519L 802.11a/b/g/n/ac 2Tx2R USB Combo Module User Manual LiteOn Technology Corp

Download:
Mirror Download [FCC.gov]
Document ID	3283979
Application ID	1YOOS/VpLVMna9nYnCI5jA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.7kB (471309 bits)
Date Submitted	2017-02-15 00:00:00
Date Available	2017-02-16 00:00:00
Creation Date	2017-12-22 09:20:39
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-22 09:20:39
Document Title	LiteOn Technology Corp.
Document Creator	Microsoft® Word 2013
Document Author:	Tracy Chang

PRODUCT SPECIFICATION
802.11a/b/g/n/ac 2Tx2R USB Combo Module
WN4519L
User Manual
Page 1/12
CONTENT
PRODUCT FEATURES .................................................................................................................... 8
PRODUCT SPECIFICATIONS ........................................................................................................ 9
MAIN CHIPSET ....................................................................................................................................... 9
FUNCTIONAL SPECIFICATIONS ............................................................................................................... 9
RECOMMENDED OPERATION CONDITIONS ........................................................................ 11
DC CHARACTERISTICS ............................................................................................................... 11
RESET TIMING SPEC .................................................................................................................... 11
EEPROM INFORMATION ............................................................................................................ 12
WI-FI ................................................................................................................................................... 12
ENVIRONMENTAL ........................................................................................................................ 12
OPERATING .......................................................................................................................................... 12
STORAGE.............................................................................................................................................. 12
Page 2/12
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
˗Reorient or relocate the receiving antenna.
˗Increase the separation between the equipment and receiver.
˗Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
˗Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device is restricted for indoor use.
This device and its antenna(s) must not be co•located with any other transmitters except in
accordance with FCC multi•transmitter product procedures.
Refering to the multi•transmitter policy, multiple•transmitter(s) and module(s) can be
operated simultaneously without C2PC.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
Page 3/12
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to
all the rules that apply to the product into which this certified RF module is integrated.
Additional testing and certification may be necessary when multiple modules are used.
20 cm minimum distance has to be able to be maintained between the antenna and the users for the host
this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for
an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the FCC radio•frequency exposure guidelines for an uncontrolled environment can be
satisfied.
The end user has to also be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment.
If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: PPQWN4519L ".
If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
OEM Integrator Checklist
The party below will implement the LITE-ON Module in host systems in accordance with the
instructions specified in this document and the documents referenced herein.
Page 4/12
1. The OEM integrator will ensure the Module is integrated in a host systems using only the approved
antenna model(s) described in this document.
2. The OEM integrator will ensure the antenna placement inside the host system will maintain the
required spacing to end user for RF Exposure compliance, as specified in this document.
3. If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will
contact its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is
required to meet FCC collocation rules.
4. The OEM integrator will ensure end user documentation will contain the specified regulatory
wording and ensure the host system and the Module itself are labeled as specified in this document.
5. The OEM integrator will ensure the Module is programmed in the factory with compliant
transmit power not exceeding the levels specified in this document.
LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above
instructions. You may contact LITE-ON with any questions concerning this document or the
responsibilities of the OEM integrator.
IC Statement:
This device complies with Industry Canada license•exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
Pour les produits disponibles aux États•Unis / Canada du marché, seul le canal 1 à 11 peuvent être
exploités. Sélection d'autres canaux n'est pas possible.
This radio transmitter (IC: 4491A-WN4519L) has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
Le présent émetteur radio (IC: 4491A-WN4519L) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain
maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Page 5/12
This device and its antenna(s) must not be co•located with any other transmitters except in accordance
with IC multi•transmitter product procedures.
Refering to the multi•transmitter policy, multiple•transmitter(s) and module(s) can be operated
simultaneously without reassessment permissive change.
Cet appareil et son antenne (s) ne doit pas être co•localisés ou fonctionnement en association avec une
autre antenne ou transmetteur.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co•channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point and
non-point-to-point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le
cas.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250-5350 MHz, 5470-5600
MHz and 5650-5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350
MHz, 5470-5600 MHz et 5650-5725 MHz.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/
or damage to LE-LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et
5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs
LAN-EL.
For indoor use only.
Pour une utilisation en intérieur uniquement.
Page 6/12
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm between
the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the host
this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set
forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the IC radio•frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate this equipment. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC: 4491AWN4519L ".
The Host Model Number (HMN) must be indicated at any location on the exterior of the end product
or product packaging or product literature which shall be available with the end product or online.
Page 7/12
PRODUCT FEATURES
 Operate at ISM frequency Band (2.4/5GHz)
 IEEE Standards Support, 802.11a ,802.11b, 802.11g 802.11n and 802.11ac
 Support for both 20 MHz/40 MHz channel width in 2.4GHz and 20 MHz/40
MHz/80MHz channel width in 5GHz
 Enterprise level security supporting: WPS2.0, WPA, WPA2
 Dual-stream IEEE 802.11n support for 20MHz and 40MHz channels provides PHY
layer rates up to 300Mbps
 Dual-stream IEEE 802.11ac support for 80MHz channels provides PHY layer rates up
to 867Mbps







Support for WI-Fi Direct
Support 802.11ac wave-2 compliant with MU-MIMO
Support Wake-on-WLAN via Magic Packet and Wake-up frame
Transmit Beamforming
Fully compliance with USB v2.0 specification
Support OS: Linux based
RoHS compliance
 Low Halogen compliance
Page 8/12
PRODUCT SPECIFICATIONS
MAIN CHIPSET
Realtek RTL8812BU
FUNCTIONAL SPECIFICATIONS
Wi-Fi Function
Standard
IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE
802.11n; IEEE802.11ac
Bus Interface
USB2.0
Data Rate
802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11b:
11, 5.5, 2, 1 Mbps
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 15 for HT20MHz
MCS 0 to 15 for HT40MHz
802.11ac:
MCS 0 to 8 for HT20MHz
MCS 0 to 9 for HT40MHz
MCS 0 to 9 for HT80MHz
Media Access Control
CSMA/CA with ACK
Modulation Technique
Network Architecture
Operation Channel
Frequency Range
Transmit Output Power –
2x2 (Tolerance: ±2dBm)
802.11a:
64QAM, 16QAM, QPSK, BPSK
802.11b:
CCK, DQPSK, DBPSK
802.11g:
64QAM, 16QAM, QPSK, BPSK
802.11n:
64QAM, 16QAM, QPSK, BPSK
802.11ac:
256QAM, 64QAM, 16QAM, QPSK, BPSK
Ad-hoc mode (Peer-to-Peer)
Infrastructure mode
2.4GHz
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
5GHz
21: USA
19: EU
8: Japan
802.11bg
2.400 ~ 2.4835 GHz
802.11a
5.15 ~ 5.85 GHz
802.11a:
13 dBm@6-54Mbps
802.11b:
Page 9/12
Receiver Sensitivity
Security
15 dBm@1-11Mbps
802.11g:
14 dBm@6-54Mbps
802.11n(2.4GHz):
20MHz:
13 dBm@MCS0-7
40MHz:
13 dBm@MCS0-7
802.11n(5GHz):
20MHz:
12 dBm@MCS0-7
40MHz:
12 dBm@MCS0-7
802.11ac:
20MHz:
12 dBm@MCS0-8
40MHz:
12 dBm@MCS0-9
80MHz:
10 dBm@MCS0-9
802.11a:
-86 dBm@6Mbps
-70 dBm@54Mbps
802.11b:
-88 dBm@1Mbps
-82 dBm@11Mbps
802.11g:
-86 dBm@6Mbps
-70 dBm@54Mbps
802.11n(2.4/5GHz):
20MHz
-84 dBm@MCS0
-69 dBm@MCS7
40MHz
-81 dBm@MCS0
-66 dBm@MCS7
802.11ac:
20MHz
-64 dBm@MCS8
40MHz
-62 dBm@MCS8
-60 dBm@MCS9
80MHz
-59 dBm@MCS8
-57 dBm@MCS9
WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X,
IEEE 802.11i
Common Function
Operating Voltage
3.3 V ±10% I/O supply voltage
Mode
Power Consumption
Average
2.4G
5G
TX
RX
Standby
Page 10/12
2.4G
Peak
5G
WiFi+BT
@Wake
up mode
Single Metal antenna for WiFi
Single External antenna for WiFi
Antenna Type
RECOMMENDED OPERATION CONDITIONS
Symbol
Rating
VDD33
3.3V Supply Voltage
VDD10
1.05V Core Supply Voltage
Min
Typ
Max
Units
3.0
3.3
3.6
0.998
1.05
1.10
Min
Typ
Max
Units
DC CHARACTERISTICS
Symbol
Parameter
VIL
Input Low Voltage
0.9
VIH
Input High Voltage
2.0
3.3
3.6
VOL
Output Low Voltage
0.33
VOH
Output High Voltage
2.97
3.3
Note: 3.3V ripple <100mV
RESET TIMING SPEC
Symbol
Min
Typ
Max
Units
Ton
3.0
1.5
ms
Ten
3.5
8.5
ms
Page 11/12
EEPROM INFORMATION
WI-FI
Reg Domain
US
2GHz: Ch1~11
5GHz: CH36~48, CH52~64, CH100~140, CH149~165
Offset 0xB8 = 0x25
Vendor ID
0x0BDA
Device ID
0xB812
ENVIRONMENTAL
OPERATING
Operating Temperature: 0 to 70 C (32 to 158 F)
Relative Humidity: 5-90% (non-condensing)
STORAGE
Temperature: -40 to 80 C (-40 to 176 F)
Relative Humidity: 5-95% (non-condensing)
Page 12/12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:36efa9de-a114-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:15 00:50:58Z
Create Date                     : 2017:07:15 00:50:58Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:36efa9de-a114-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools