LITE ON TECHNOLOGY WN4520L Wireless Module User Manual

LITE-ON Technology Corp. Wireless Module

Contents

User manual

WN4520L Page 1/15 2017/7/26
USERMANUAL
WirelessModule
ModelName:WN4520L
LiteonP/NSonyP/N
TypeA
AAZ100426G0
Version1.0
Author:KaysaLee
ChangeHistory
RevisionDateAuthorChangeList
Version1.02017/07/19KaysaLeeInitialrelease
*ThisdocumentcontainsconfidentialproprietaryinformationandispropertyofLTC.Thecontentsofthis
documentshouldnotbedisclosedtounauthorizedpersonswithoutthewrittenconsentofLTC.
WN4520L Page 2/15 2017/7/26
C
ONTENT
1
PRODUCTOVERVIEW......................................................................................................................3
1.1
DESCRIPTION.............................................................................................................................3
1.2
FEATURES..................................................................................................................................3
1.3
GENERALSPECIFICATIONS.........................................................................................................3
1.4
PARTSLAYOUT...........................................................................................................................4
1.5
BOARDOUTLINE........................................................................................................................5
1.6
PANELDRAWING.......................................................................................................................6
1.7
PCBINFORMATION....................................................................................................................7
1.8
SHIELDING..................................................................................................................................8
WN4520L Page 3/15 2017/7/26
1 PRODUCTOVERVIEW
1.1 DESCRIPTION
WN4520LisaWLANmodulewhichusingChipsets:RockchipNanoDandRealtekRTL8821CSH
1.2 FEATURES
Operateat2.4GHz/5GHzband
150MbpsPHYRateSupport
1T1RMode
20MHzBandwidthSupport(2.4G),20/40MHzBandwidthSupport(5G)
IEEEstandardssupport:IEEE802.11a/b/gand802.11n
802.11i‐WEP64/128,AES,TKIP
RoHScompliance
LowHalogencompliance
1.3 GENERALSPECIFICATIONS
MainChipset
RTL8821CSH
Standard
IEEE802.11a/b/g/n
BusInterface
USB2.0
FormFactor
42mmx50mmx3.5mm
Weight
8g
DataRate
WiFi:
802.11b:
CCK,DQPSK,DBPSK
802.11a,802.11g:
64QAM,16QAM,QPSK,BPSK
802.11n:
64QAM,16QAM,QPSK,BPSK
FrequencyRange
2.400~2.4835GHz
5.150~5.85GHz
TransmitOutput
Power
ReceiveSensitivity
WiFi:
11b:13+/‐1.5dBm(11Mbps)
11g:13+/‐1.5dBm(54Mbps)
11n:13+/‐1.5dBm(MCS7HT20)
11a:13+/‐1.5dBm(54Mbps),*5.8GHz=13+/‐1.5dBm
11an:13+/‐1.5dBm(MCS7HT20/40),*5.8GHz=13+/‐1.5dBm
WiFi:
11b@11Mbps:(Max.):‐85dBm,(Typical):‐89dBm(PER<8%)
11g@54Mbps:(Max.):‐69dBm,(Typical):‐75.5dBm(PER<10%)
11n@MCS7(2.4gHT20):(Max.):‐67dBm,(Typical):‐73dBm(PER<10%)
11n@MCS7(5gHT20):(Max.):‐67dBm,(Typical):‐71dBm(PER<10%)
11n@MCS7(5gHT40):(Max.):‐64dBm,(Typical):‐68.5dBm(PER<10%)
Temperature&
Humidity
NormalTestCondition:25+/‐2deg.C,65+/‐2%RH
Operating:‐10to70deg.C
Storage:‐40to85deg.C
OperatingVoltage
4V±10%I/Osupplyvoltage
WN4520L Page 4/15 2017/7/26
Current
Consumption
TBD
AntennaType
PrintedAntenna:
2.4G:2.5dBi(maxpeakgain)
5G:3.5dBi(maxpeakgain)
1.4 PARTSLAYOUT
WN4520L Page 5/15 2017/7/26
1.5 BOARDOUTLINE
WN4520L Page 6/15 2017/7/26
1.6 PANELDRAWING

WN4520L Page 7/15 2017/7/26
1.7 PCBINFORMATION
No.ItemVendor#1Vendor#2
1PWBSupplierAPCBPIOTEK
2IDMark 
3PWBSupplierULFileNo. 
4PWBMaterialSupplier 
5PWBMaterial 
6PWBMaterialSupplier
ULFileNo.
7FlameClass 
8RatedTemperature

(MaxOperationTemp.)
WN4520L Page 8/15 2017/7/26
1.8 SHIELDING
WN4520L Page 9/15 2017/7/26
FCC WARING STATEMENT
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
RF exposure warning This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment must be installed and operated in
accordance with provided instructions and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
This device is restricted to indoor use.
Thisdeviceisslaveequipment,thedeviceisnotradardetectionandnotadhocoperationin
WN4520L Page 10/15 2017/7/26
theDFSband.
WN4520L Page 11/15 2017/7/26
End Product Labeling
Thefinalendproductmustbelabeledinavisibleareawiththefollowing:"ContainsFCCID:
PPQWN4520L
IMPORTANT NOTE:
This module is intended for OEM integrator.
The OEM integrator is still responsible for
1. ensuring that the end-user has no manual instructions to remove or install module
2. the FCC compliance requirement of the end product, which integrates this
module.
3. Appropriate measurements (e.g. 15 B compliance) and if applicable additional
equipment authorizations (e.g. Verification, Doc) of the host device to be
addressed by the integrator/manufacturer.
4. The separate approval is required for all other operating configurations, including
portable configurations with respect to Part 2.1093 and different antenna
configurations
USERS MANUAL OF THE END PRODUCT:
The module is limited to installation in mobile or fixed applications
In the users manual of the end product, the end user has to be informed to keep at
least 20cm separation with the antenna while this end product is installed and
operated. The end user has to be informed that the FCC radio-frequency exposure
guidelines for an uncontrolled environment can be satisfied. The end user has to
also be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment. If the size of
the end product is smaller than the palm of the hand, then additional FCC part 15.19
statement is required to be available in the users manual: This device complies with
Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.

WN4520L Page 12/15 2017/7/26
ICWARINGSTATEMENT
Canada,avisd'IndustryCanada(IC)
ThisdevicecomplieswithIndustryCanada’slicenceexemptRSSs.Operationissubjectto
thefollowingtwoconditions:
(1)Thisdevicemaynotcauseinterference;and
(2)Thisdevicemustacceptanyinterference,includinginterferencethatmaycause
undesiredoperationofthedevice.
LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradio
exemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareil
nedoitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertout
brouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrele
fonctionnement.
Thisdeviceisrestrictedtoindooruse.
High Power Radars: High power radars are allocated as primary users (meaning they
have priority) in the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These
radars could cause interference and/or damage to Wireless LAN devices used in
Canada.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
qu'ils ont la priorité) pour les bandes 5250 - 5350 MHz et 5650 - 5850 MHz. Ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20cm de distance entre la source de rayonnement et votre corps

WN4520L Page 13/15 2017/7/26
OEMintegratorisstillresponsiblefortestingtheirendproductforanyadditionalcompliance
requirementsrequiredwiththismoduleinstalled(forexample,digitaldeviceemissions,PC
peripheralrequirements,etc.).
IMPORTANTNOTE:Intheeventthattheseconditionscannotbemet(forexamplecertainlaptop
configurationsorcolocationwithanothertransmitter),thentheICauthorizationisnolonger
consideredvalidandtheICNo.cannotbeusedonthefinalproduct.Inthesecircumstances,the
OEMintegratorwillberesponsibleforreevaluatingtheendproduct(includingthetransmitter)
andobtainingaseparateICauthorization.
EndProductLabeling
Thistransmittermoduleisauthorizedonlyforuseindevicewheretheantennamaybeinstalled
suchthat20cmmaybemaintainedbetweentheantennaandusers.Thefinalendproductmust
belabeledinavisibleareawiththefollowing:“ContainstransmittermoduleIC:
4491AWN4520L”.
Contientlemoduled'émissionIC:4491AWN4520L
Thisradiotransmitter(4491AWN4520L)hasbeenapprovedbyIndustryCanadatooperatewith
theantennatypeslistedbelowwiththemaximumpermissiblegainindicated.Antennatypesnot
includedinthislist,havingagaingreaterthanthemaximumgainindicatedforthattype,are
strictlyprohibitedforusewiththisdevice.
Ant. Brand Model Type Gain(dBi)
2.4G 5G
1
LI-TEON
WN4520L
Printed Antenna 2.5 3.5
Le présent émetteur radio (4491A-WN4520L) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et
l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,
ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.
Ant. Brand Model Type Gain(dBi)
2.4G 5G
1 LI-TEON WN4520L Printed Antenna 2.5 3.5
The transmitter module may not be co-located with any other transmitter or antenna.
Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
WN4520L Page 14/15 2017/7/26
RadioFrequency(RF)ExposureInformation
TheradiatedoutputpoweroftheWirelessDeviceisbelowtheIndustryCanada(IC)radio
frequencyexposurelimits.TheWirelessDeviceshouldbeusedinsuchamannersuchthatthe
potentialforhumancontactduringnormaloperationisminimized.
ThisdevicehasalsobeenevaluatedandshowncompliantwiththeICRFExposurelimitsunder
mobileexposureconditions.(antennasaregreaterthan20cmfromaperson'sbody).
Informationsconcernantl'expositionauxfréquencesradio(RF)
Lapuissancedesortieémiseparl’appareildesansfilestinférieureàlalimited'expositionaux
fréquencesradiod'IndustryCanada(IC).Utilisezl’appareildesansfildefaçonàminimiserles
contactshumainslorsdufonctionnementnormal.
Cepériphériqueaégalementétéévaluéetdémontréconformeauxlimitesd'expositionauxRF
d'ICdansdesconditionsd'expositionàdesappareilsmobiles(lesantennessesituentà
moinsde20cmducorpsd'unepersonne).

WN4520L Page 15/15 2017/7/26
JapanStatement:
5GHzproductforindooruseonly.
この製品は屋内においてのみ使用可能です
CEStatement:
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table
provides information on the frequency bands used and the maximum RF transmit
power of the product for sale in the EU:
Frequency range (MHz) Max. Transmit Power
(dBm/mW)
2400-2483.5 dBm
5150-5250 dBm
5250-5350 dBm
5470-5725 dBm
ThisequipmentcomplieswithEUradiationexposurelimitssetforthforanuncontrolled
environment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cm
betweentheradiator&yourbody.
The device is restricted to indoor use only.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
NCC 警語:
經型式認證合格之低功率射頻電非經許可公司號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即
停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通
信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
無線資訊傳輸設備必須具備安全功能,以保護未經授權之一方任意更改軟體進而避免發射
機操作於非經認證之頻率、輸出功率、調變形式或其他射頻參數設定。
無線資訊傳輸設備避免影響附近雷達系統之操作。

Navigation menu