LITE ON TECHNOLOGY WN4616L WLAN USB Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2308899
Application ID	7wGWeUXsw8NyTQaX6aS9XQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.99kB (162425 bits)
Date Submitted	2014-06-27 00:00:00
Date Available	2014-06-27 00:00:00
Creation Date	2014-06-27 16:51:56
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2014-06-27 16:51:56
Document Title	Microsoft Word - WN4616L_說明書用_Realtek_11n_2 4G_2x2_USB_Module_Spec_Ver1 1 (2)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Elaine

PRODUCT SPECIFICATION
802.11n, 2T2R Single Band Wireless LAN USB Module
WN4616L
Version 1.1
User Manual
This document contains confidential proprietary information and is property of LTC. The contents of this document should not
be disclosed to unauthorized persons without the written consent of LTC.
WN4616L Specification
Page 1/10
LTC Network Access Confidential
2014/6/27
PRODUCT DESCRIPTION
The Wireless LAN USB Module is a sleek miniature Wireless LAN device working under
2.4GHz frequency band. Compatible with IEEE standards, 802.11b, 802.11g and support
802.11n. It provides full functional wireless access within wireless environments anytime,
anywhere at a data rate of up to 300Mbps. The WN4616L comes with an USB 2.0 interface
providing the maximum transfer rate of 480Mbps, the form factor is an embedded module.
WN4616L embody 2 transmitter 2 receiver (2T2R) architecture to ensure reliable and
cost-effective wireless connectivity at high throughput over an extended range. Optimized RF
architecture and base band algorithms provide super performance with low-power
consumption.
PRODUCT FEATURES
 Operate at 2.4GHz band
 300Mbps PHY Rate Support
 2T2R Modes
 20MHz/40MHz Bandwidth Support
 USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed
 IEEE standards support: IEEE 802.11b/g and 802.11n
 802.11i- WEP 64/128, AES, TKIP
 Low power with advanced Power Management
 Embedded CPU with host off-load capability
 Support WoW function
 RoHS compliance
Product specifications
Main chipset
MAC/Baseband/RF: Realtek RTL8192EU
WN4616L Specification
Page 2/10
LTC Network Access Confidential
2014/6/27
Functional Specifications
Standard
IEEE802.11b; IEEE 802.11g; IEEE802.11n
Bus Interface
Universal Serial Bus (USB2.0)
Data Rate
802.11b:
11, 5.5, 2, 1 Mbps
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 15 for HT20MHz
MCS 0 to 15 for HT40MHz
Media Access Control
CSMA/CA with ACK
Radio Technology
802.11b:
CCK, DQPSK, DBPSK
802.11g:
64QAM, 16 QAM, QPSK, BPSK
802.11n:
BPSK, QPSK, 16QAM, 64QAM
Network architecture
Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
Operating Channel
2.4GHz
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
Frequency Range
802.11 b & g
2.412 ~ 2.462 GHz – N. America
2.412 ~ 2.484 GHz – Japan
2.412 ~ 2.472 GHz – Europe ETSI
802.11b:
Less than -76dBm
802.11g:
Receiver Sensitivity
Less than -82dBm @ 6Mpbs
Less than -65dBm @54Mbps
802.11n:
Security
Less than -82dBm @ MCS0
Less than -64dBm @ MCS7
64-bit, 128-bit WEP, TKIP, AES, WPA, WPA2, WPS
IEEE 802.11i
Operating Voltage
5V ±5% I/O supply voltage
OS supported
Windows, Linux(embedded system)
Power Consumption
Standby: 196mA
TX: 369mA
RX: 238mA
Antenna Type
Dual Metal Antenna
*Environmental factors dependent
WN4616L Specification
Page 3/10
LTC Network Access Confidential
2014/6/27
ENVIRONMENTAL
Operating
Operating Temperature: -10 to 75 C (14 to 167 F)
Relative Humidity: 5-90% (non-condensing)
Storage
Temperature: -40 to 85 C (-40 to 185 F)
Relevant Humidity: 5-95% (non-condensing)
WN4616L Specification
Page 4/10
LTC Network Access Confidential
2014/6/27
REGULATORY STATEMENTS
FCC Certification
The United States Federal Communication Commission (FCC) and the
Canadian Department of Communications have established certain rules
governing the use of electronic equipment.
Part15, Class B
This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference
that may cause undesired operation. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part15
of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WN4616L Specification
Page 5/10
LTC Network Access Confidential
2014/6/27
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user authority to
operate the equipment.
1. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2. For product available in the USA market, only channel 1~11 can be
operated. Selection of other channels is not possible.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still
responsible for the FCC compliance requirement of the end product, which
integrates this module.
20cm minimum distance has to be able to be maintained between the antenna
and the users for the host this module is integrated into. Under such
configuration, the FCC radiation exposure limits set forth for an
population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to
keep at least 20cm separation with the antenna while this end product is
installed and operated. The end user has to be informed that the FCC
radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment. If the size of the end product is
smaller than 8x10cm, then additional FCC part 15.19 statement is required to
be available in the user manual: This device complies with Part 15 of FCC
rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired
WN4616L Specification
Page 6/10
LTC Network Access Confidential
2014/6/27
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
PPQ-WN4616L ".
完全模組
IMPORTANT NOTE:
This module is intended for OEM integrator.
The OEM integrator is still responsible for the FCC compliance requirement of the end product,
which integrates this module.
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment
authorizations (e.g. Verification , Doc) of the host device to be addressed by the
integrator/manufacturer.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna
may be installed such that 20 cm may be maintained between the antenna and
users. The final end product must be labeled in a visible area with the following:
“Contains transmitter module IC: 4491A-WN4614L”.
Contient le module d'émission IC: 4491A-WN4614L
WN4616L Specification
Page 7/10
LTC Network Access Confidential
2014/6/27
IN
NTRODU
UCTIO
ON
Thee 802.11b/g//n 2T2R WLAN
is a ddevice that allows
you connect
youur computerr to
a wiireless locall area netwo
ork (LAN). A wireless LAN allow
ws your systtem to use
wireeless Radio Frequency (RF) technnology to traansmit and receive
dataa without
phyysically attacching to thee network. T
The Wirelesss protocols that come w
with this
prodduct ensure data securiity and isolaation from interference generated bby other rad
dio
freqquencies.
Thiss card also allows
you to take full advantage of your com
mputer’s moobility with
acceess to real-ttime inform
mation and oonline servicces anytime and anywhhere. In addition,
this device elim
minates the bother
of puulling cablee through waalls and undder furnituree. It
evenn allows yoou to place your
system
m in location
ns where cab
bling is imppossible.
Moddifying andd augmentin
ng networks has never been
so easy
y.
Wirreless Ne
etwork Op
ptions
The
e Peer-to-Peer Networrk
Thiss network innstallation lets
l you set a small wirreless workg
group easilyy and
quicckly. Equippped with US
SB port, yoou can sharee files
and printers between each PC and lapptop.
Youu can also use
u one com
mputer as an Internet Seerver to conn
nect to a wiired global
netw
work and shhare files an
nd informatiion with oth
her computeers via a wirreless LAN..
4616L Speciification
WN4
Page 8/10
ork Access Confidential
LTC Netwo
2014/6/2
27
e Access Point Netwo
ork
The
Thee network innstallation allows
you tto share files, printers, and
a Internett access
mucch more connveniently. With Wirelless LAN Cards,
you caan connect w
wireless
LAN
N to a wiredd global nettwork via ann Access Po
oint.
SO
OFTWA
ARE INSTALL
LATION
Ins
stall the device
1. Make sure the computer is turnedd off. Remov
ve the expan
nsion slot coover from the
computer.
2.11b/g/n 2T
T2R WLAN
N into the USB
U slot. Puush evenly and
2. Carefully slide the 802
slowly and ensure it is properly seeated.
3. After the deevice has beeen connectted to your computer, turn on yourr computer.
Windows will
w detect th
he new harddware and then automaatically copyy all of the files
needed for networking
g.
4616L Speciification
WN4
Page 9/10
ork Access Confidential
LTC Netwo
2014/6/2
27
Install the Driver & Utility
1. Exit all Windows programs. Insert the included CD-ROM into your computer. The
CD-ROM will run automatically.
2. Manually install driver from Device Manager
HARDWARE INSTALLATION
Verification
To verify if the device exists in your computer and is enabled, go to Start >
Control Panel > System (> Hardware) > Device Manager. Expand the
Network Adapters category. If the 802.11n Wireless LAN Card
is listed here, it means that your device is properly installed and enabled.
NETWORK CONNECTION
Once the device driver is well installed, a network setting described in the following
should be also established.
1. Click the Wireless icon to enable Windows Zero Configure.
2. Select the AP then click the Connect
WN4616L Specification
Page 10/10
LTC Network Access Confidential
2014/6/27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Elaine
Create Date                     : 2014:06:27 16:51:56+08:00
Modify Date                     : 2014:06:27 16:51:56+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - WN4616L_說明書用_Realtek_11n_2 4G_2x2_USB_Module_Spec_Ver1 1 (2)
Creator                         : Elaine
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Document ID                     : uuid:d306e287-2223-4929-a251-38679661d886
Instance ID                     : uuid:b6bdb426-9d21-4db8-ac90-e95423b93358
Page Count                      : 10

EXIF Metadata provided by EXIF.tools