LITE ON TECHNOLOGY WN4636R WLAN Module User Manual LiteOn Technology Corp

Download:
Mirror Download [FCC.gov]
Document ID	2369474
Application ID	+EIiNTI6VxUXiuojqaiq/w==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.94kB (524283 bits)
Date Submitted	2014-08-26 00:00:00
Date Available	2014-08-26 00:00:00
Creation Date	2014-08-26 10:17:22
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2014-08-26 10:17:22
Document Title	LiteOn Technology Corp.
Document Creator	Microsoft® Office Word 2007
Document Author:	Tracy Chang

PRODUCT SPECIFICATION
WLAN Module
WN4636R
User Manual
Change History
Revision
Version 1.0
Date
2014 / 07 / 10
Author
Kaysa Lee
Change List
Preliminary
* This document contains confidential proprietary information and is property of LTC. The contents of this
document should not be disclosed to unauthorized persons without the written consent of LTC.
WN4636R
Page 1/8
2014/8/26
1 PRODUCT OVERVIEW
1.1 DESCRIPTION
WN4636R is a WLAN module which using MTK Chipset MT7603U
1.2 FEATURES
 Operate at 2.4GHz band
 150Mbps PHY Rate Support
 2T2R Modes
 20MHz Bandwidth Support
 USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed
 IEEE standards support: IEEE 802.11b/g and 802.11n
 802.11i- WEP 64/128, AES, TKIP
 RoHS compliance
 Low Halogen compliance
1.3 GENERAL SPECIFICATIONS
Main Chipset
MT7603U
Standard
IEEE 802.11b/g/n
Bus Interface
USB 2.0
Form Factor
53.8mm x 20mm x 5mm
Weight
4.2g
Data Rate
802.11b:
CCK, DQPSK, DBPSK
802.11g:
64QAM, 16 QAM, QPSK, BPSK
802.11n:
BPSK, QPSK, 16QAM, 64QAM
Frequency Range
2.400 ~ 2.4835 GHz
11b: 15 +/- 1.5dBm
Transmit Output Power 11g: 15 +/- 1.5dBm
11n: 15 +/- 1.5dBm
11b @ 11Mbps -85dBm (PER<8%)
Receive Sensitivity
11g @ 54Mbps -69dBm (PER<10%)
11n @ MCS7 -67dBm (PER<10%)
Normal Test Condition: 25 +/- 2deg.C , 65 +/- 2% RH
Temperature &
Operating: -10 to 45 deg.C (2x2 mode), -10 to 60 deg.C (1x2 mode)
Humidity
Storage: -40 to 85 deg.C
Operating Voltage
3.3V ±10% I/O supply voltage
Antenna Type
Printed Antenna PWB
WN4636R
Page 2/8
2014/8/26
REGULATORY STATEMENTS
FCC Certification
The United States Federal Communication Commission (FCC) and the
Canadian Department of Communications have established certain rules
governing the use of electronic equipment.
Part15, Class B
This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference
that may cause undesired operation. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part15
of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WN4636R
Page 3/8
2014/8/26
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user authority to operate
the equipment.
1. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2. For product available in the USA market, only channel 1~11 can be
operated. Selection of other channels is not possible.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible
for the FCC compliance requirement of the end product, which integrates this module.
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment
authorizations (e.g. Verification , Doc) of the host device to be addressed by the
integrator/manufacturer.
20cm minimum distance has to be able to be maintained between the antenna and the users
for the host this module is integrated into. Under such configuration, the FCC radiation
exposure limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
Antenna General Information
No.
Ant. Cat.
Ant. Type
Model name
Gain (dBi)
Integral
PIFA
WN4636R
0.16
Integral
PIFA
WN4636R
0.82
Note: The EUT Supported CCD Funection
USERS MANUAL OF THE END PRODUCT:
In the user manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has
to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's authority to
WN4636R
Page 4/8
2014/8/26
operate this equipment. If the size of the end product is smaller than 8x10cm, then additional
FCC part 15.19 statement is required to be available in the user manual: This device complies
with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC
ID:
PPQ-WN4636R ".
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna
may be installed such that 20 cm may be maintained between the antenna and
users. The final end product must be labeled in a visible area with the following:
“Contains transmitter module IC: 4491A-WN4636R”.
Contient le module d'émission IC: 4491A-WN4636R
INTRODUCTION
The WLAN Module is a device that allows you connect your computer to a wireless local
area network (LAN). A wireless LAN allows your system to use wireless Radio Frequency
(RF) technology to transmit and receive data without physically attaching to the network. The
Wireless protocols that come with this product ensure data security and isolation from
interference generated by other radio frequencies.
This card also allows you to take full advantage of your computer’s mobility with
WN4636R
Page 5/8
2014/8/26
access to real-time information and online services anytime and anywhere. In addition, this
device eliminates the bother of pulling cable through walls and under furniture. It even allows
you to place your system in locations where cabling is impossible. Modifying and augmenting
networks has never been so easy.
Wireless Network Options
The Peer-to-Peer Network
This network installation lets you set a small wireless workgroup easily and
quickly. Equipped with USB port, you can share files
and printers between each PC and laptop.
You can also use one computer as an Internet Server to connect to a wired global
network and share files and information with other computers via a wireless LAN.
The Access Point Network
The network installation allows you to share files, printers, and Internet access
much more conveniently. With Wireless LAN Cards, you can connect wireless
LAN to a wired global network via an Access Point.
WN4636R
Page 6/8
2014/8/26
SOFTWARE INSTALLATION
Install the device
1. Make sure the computer is turned off. Remove the expansion slot cover from the computer.
2. Carefully slide the 802.11b/g/n 2T2R WLAN into the USB slot. Push evenly and slowly
and ensure it is properly seated.
3. After the device has been connected to your computer, turn on your computer. Windows
will detect the new hardware and then automatically copy all of the files needed for
networking.
WN4636R
Page 7/8
2014/8/26
Install the Driver & Utility
1. Exit all Windows programs. Insert the included CD-ROM into your computer. The CD-ROM
will run automatically.
2. Manually install driver from Device Manager
HARDWARE INSTALLATION
Verification
To verify if the device exists in your computer and is enabled, go to Start >
Control Panel > System (> Hardware) > Device Manager. Expand the
Network Adapters category. If the 802.11n Wireless LAN Card
is listed here, it means that your device is properly installed and enabled.
NETWORK CONNECTION
Once the device driver is well installed, a network setting described in the following should
be also established.
1. Click the Wireless icon to enable Windows Zero Configure.
2. Select the AP then click the Connect
WN4636R
Page 8/8
2014/8/26

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 8
Language                        : zh-TW
Tagged PDF                      : Yes
Title                           : LiteOn Technology Corp.
Author                          : Tracy Chang
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2014:08:26 10:17:22+08:00
Modify Date                     : 2014:08:26 10:17:22+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools