LITE ON TECHNOLOGY WP8331 802.11ac Dual Band PoE Access Point User Manual 05 Revise

LITE-ON Technology Corp. 802.11ac Dual Band PoE Access Point 05 Revise

Contents

PPQ-WP8331_User manual_1214

   WP8331 802.11ac Dual Band PoE Access Point External Specification       Version: V0.4                 This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
                      Page 2 of 9 Specification Revision History Version  Revised Date  Person Name  Content Revised 0.1 2016/05/13 Flora Yu  First edit 0.2 2016/05/20 Flora Yu  Change CPU platform 0.3  2016/08/03  Flora Yu  Change BLE chip to support interface via USBUpdate certification requirement 0.4  2016/1013  Flora Yu  Increasing Rx sensibility number
                      Page 3 of 9  1 Product Descriptions The WP8331 is a two radios, dual band, 802.11ac access point. It provides powerful WLAN supporting wireless speed up to 300Mbps on 2.4GHz and 867Mbps on 5GHz, one Ethernet port to connect to the backbone network, one Ethernet ports can be aggregated to connect to one computer through the network cables. Besides, the WP8331 supports 802.3at PoE PD to allow the device powered by PoE switch remotely.  To protect data during wireless transmission, the device supports WEP data encryption and WPA/WPA2 wireless security to ensure network safely.  The WP8331 is ideal for a variety of medium density enterprise and hotspot environments including SMBs, hotels, retail outlets and branch offices.  2  Product Specifications and Features 2.1 H/W Features 2.1.1 Specification Key Components / Connectors / Performance Processor QCA IPQ4028 Wireless Chipset  Integrated with IPQ4028 – 2.4G Integrated with IPQ4028 – 5G BT/BLE  CSR8510 (optional, layout reserved via USB to SoC) GE PHY  QCA8072 SPI Flash  64Mbytes (pin-to-pin downsize) – default NAND Flash  128MB – optional/reserved DDR3  256Mbytes (pin-to-pin downsize or upsize to 1GB) Console Internal console port   Interfaces Ethernet 1x 10/100/1000 Base-TX MDI/MDIX RJ-45 port with PoE PD 802.3 at 1x 10/100/1000 Base-TX MDI/MDIX RJ-45 port  Compliant with following standards: 1. IEEE 802.3/802.3u 2. Hardware based 10/100/1000, full/half, flow control auto negotiation3. Full duplex IEEE 802.3x flow control and half duplex back-pressureflow control
                      Page 4 of 9  Wireless 802.11ac 2.4GHz on board 802.11ac 5GHz on board BT/BLE on board 2 internal antennas – 2.4G antenna 2 internal antennas – 5G 1 internal antenna – BT/BLE   IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac compliant Data Rate: 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11g: 54, 48, 36, 24, 18, 12, 9 & 6 Mbps 802.11b: 11, 5.5, 2 & 1 Mbps 802.11n :   20 MHz BW: 130, 117, 104, 78, 52, 39, 26, 13Mbps 40 MHz BW: 270, 243, 216, 162, 108, 81, 54, 27 Mbps 802.11ac : 20MHz BW : 173, 144, 130, 115, 86, 57, 43, 28,14 Mbps 40MHz BW : 400, 360, 300, 270, 240, 180, 120, 90, 60, 30 Mbps 80MHz BW : 867, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps Modulation: 802.11g: OFDM, BPSK, QPSK, 16QAM, 64QAM 802.11b:CCK(11&5.5 Mbps), DQPSK (2Mbps), DBPSK (1Mbps), DSSS 802.11n: PSK/CCK, DBPSK, DQPSK, OFDM 802.11ac: DSSS, OFDM, MIMO-OFDM, 16QAM, 64QAM, 256QAM Operating Frequencies: USA – FCC                 2412~2462MHz  Canada – IC                2412~2462MHz  Europe – ETSI              2412~2472MHz  Operating Frequencies:   2400 ~ 2484.5 MHz 5150MHz ~ 5250MHz and 5725MHz ~ 5850MHz for US & Canada 5150MHz ~ 5350MHz for Europe 5470MHz ~ 5725MHz for Europe 5030MHz~5091MHz and 5150MHz ~ 5250MHz for Japan 5150MHz ~ 5350MHz for Australia 5470MHz ~ 5725MHz for Australia (except channel 120, 124 and 128) 5725Mhz ~ 5825Mhz for Australia Output Power: 2.4GHz band (discrete PA/LNA) 802.11n: 20 +/- 2 dBm 802.11g: 20 +/- 2 dBm 802.11b: 20 +/- 2 dBm  5GHz band (discrete PA/LNA) 802.11a : 20 +/-2 dBm 802.11n : 20 +/-2 dBm 802.11ac : 18 +/-2 dBm
                      Page 5 of 9 Rx sensitivity: 2.4GHz band, 802.11b@11Mbps: -91 +/- 2dBm 802.11g@54Mbps: -76 +/- 2dBm 802.11n MCS7: -73 +/-2 dBm  5GHz band, 802.11a @6Mbps: -93+/- 2dBm 802.11a @54Mbps: -76+/- 2dBm 802.11n MCS7 : -72 +/- 2dBm 802.11ac MCS9:-64 +/- 2dBm  BT Peak Gain: 2.6 dBi   2.4G Ant _1: Peak Gain: 4.7 dBi   Ant _2: Peak Gain: 3.3 dBi   5G 5180~5240 MHz Ant _1: Peak Gain: 3.8 dBi   Ant _2: Peak Gain: 5.0 dBi   5745~5825 MHz Ant _1: Peak Gain: 5.1 dBi   Ant _2: Peak Gain: 5.0 dBi   Impedance: 50 Ohm nominal Antenna efficiency - 2.4G: 50% Antenna efficiency - 5G: 60% Antenna efficiency - BLE: 40% V.S.W.R.: 2.0:1 Max USB  Host 2.0 (optional) Reset  1 x reset button  2.1.2 LED indicators - from left to right (total 5 LEDs)  PWR  LAN1  LAN2  5G  2.4G  Location  LED Indicative  Color  Status  Description Per device Power  Green  Solid Light  Power on Light off  Power off WLAN Green (5G) Solid Light  Connect to WLAN port Blinking  WLAN activity present Light off  No activity or power off Amber (2.4G) Solid Light  Connect to WLAN port Blinking  WLAN activity present Light off  No activity or power off Per port  LAN  Green Solid Light Device connected to LAN port at 10/100/1000Mbps
                      Page 6 of 9 Blinking LAN Activity present Light off  Not Connected      2.2 RF performance (Note: The transmit power of WP8331 should be SW configurable according to countries’ regulatory)   Max Tx power per chain @ 2.4GHz: 20dBm±2/Chain  Max Tx Power per chain @ 5GHz: 20dBm±2/Chain Maximum Transmit Power (per chain)± 2 dBm   2.4GHz  5G 1Mbps 20dBm  - 11Mbps 20dBm  - 6Mbps 20dBm  20dBm 54Mbps 18dBm  19dBm HT20(MCS 0/8) 20dBm  20dBm HT20(MCS 7/15) 18dBm  19dBm HT40(MCS 0/8) 20dBm  20dBm HT40(MCS 7/15) 18dBm  18dBm VHT80 MCS0  18dBm VHT80 256QAM @ MCS 8 -  17dBm VHT80 256QAM @ MCS 9 -  16dBm  Receive Sensitivity (per chain)  2 dB   2.4GHz  5GHz 11 g (6Mbps)  -93  - 11 g (54Mbps)  -76  - 11 a (6Mbps)  -  -93 11 a (54Mbps)  -  -76 HT20(MSC 0/8)  -92 -92 HT20(MSC 7/15)  -73 -71 HT40(MSC 0/8)  -90  -89
                      Page 7 of 9 HT40(MSC 7/15)  -70 -68 VHT20 MCS 9  -  -65 VHT40 MCS 9  -  -64 VHT80 MCS 9  -  -60  2.3 S/W Features Software specification Feature Item  Feature  Detailed Description Wireless  Wireless mode  11b/g/n 11a/ac Operation mode  Access point mode (Support both normal station and WDS station) Bandwidth  20MHz 20/40MHz dynamic 20/40/80MHz dynamic Aggregation in 11n mode  A-MPDU SSID  Support 4 virtual AP   QoS  EDCA WMM QoS-DSCP configurable via web UI Other parameter configurable via Web UI  Transmit power adjustable (four level: full, 1/2, 1/4, 1/8) DTIM Guard interval (short/long) Security  Authentication  WPA/WPA2 Personal (PSK), 802.1X Authentication with RADIUS Client Enterprise (802.1x): PEAP, TTLS, TLS Encryption  AES, TKIP, WEP 64/128,   Management  Network setting  IPv4 static IP & DHCP client Statistics  Statistics of wired, wireless associated stations accessible SNMP v1/v2  MIBII(survey throughput, data statistics, location) Wireless ACL in AP mode  Based on MAC address Firmware upgrade    via Web UI via SNMP System log  Syslog Discovery tools  LiteON Locator For customization, like GUI / SNMP MIBs/ configuration tool or customer internal utility, will discuss with customer once project is awarded.
                      Page 8 of 9 3  Mechanical and Environment Design  3.1  Case (details refer to ME drawing separately) A.  ID/Tool (leverage WP8336-AB) This ID is a small form factor within 146x146mm. The bottom ID/ME shall seamlessly (without tooling updates) support potential different styles of top cover for customers. The ID has a Kensington lock hole on the enclosure.  B.  I/O port (back view, ordering from right to left)  DCINRESETLAN1LAN2(PoE) C. Mounting Kit 1.  It needs to accommodate Mojo four mounting kits for T-bar and hard surface mount. 2.  There are three T-bar width supported, 15, 24 and 38mm. 3.  The hard flat surface mounting including wall and ceiling mount a. standard, 2 key holes in the central part on bottom case (optional) b. optional accessory, separate bracket  3.2  Physical & Environment 3.2.1  Power -  PoE DC 48V -  Optional external power adapter, (to be quoted separately)  Input: 100-240VAC, 50/60Hz  Output: Switching12V DC/1.5A (for DC jack center pin 2.0mm) -  Reset Button: Reset to factory default by pushing button for 5 sec
                      Page 9 of 9 3.2.2  Operation Temperature - Temp: 0° C to +45° C (+32° F to +113° F) - Humidity: 5% ~ 95%R.H non-condensing  3.2.3  Storage Temperature - Temp: -4℉ to 149℉ (-20℃ to 65℃) - Humidity: 5% ~ 95% non-condensing  4 Certification Requirements STATUATORY - USA (Non DFS) - USA (DFS) - Canada (IC) - Europe (CE) - Japan (TELEC) - India (WPC) - Korea (KCC) - Taiwan (NCC) - China (MII-NAL) - AUS/NZ  SAFETY - USA UL - Canada cUL - WW CB (IECEE) - China CCC  Others - RoHS (self- announcement) - WEEE (self- announcement)
FCCStatement:FederalCommunicationCommissionInterferenceStatementThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneofthefollowingmeasures:●Reorientorrelocatethereceivingantenna.●Increasetheseparationbetweentheequipmentandreceiver.●Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.●Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCCCaution:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatethisequipment.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.ForproductavailableintheUSA/Canadamarket,onlychannel1~11canbeoperated.Selectionofotherchannelsisnotpossible.Thisdeviceanditsantenna(s)mustnotbeco‐locatedwithanyothertransmittersexceptinaccordancewithFCCmulti‐transmitterproductprocedures.Thedeviceforoperationintheband5150–5250MHzisonlyforindooruseIMPORTANTNOTE:FCCRadiationExposureStatement:ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody.
ICStatement:ThisdevicecomplieswithIndustryCanadalicense‐exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.ForproductavailableintheUSA/Canadamarket,onlychannel1~11canbeoperated.Selectionofotherchannelsisnotpossible.PourlesproduitsdisponiblesauxÉtats‐Unis/Canadadumarché,seullecanal1à11peuventêtreexploités.Sélectiond'autrescanauxn'estpaspossible.Thisdeviceanditsantenna(s)mustnotbeco‐locatedwithanyothertransmittersexceptinaccordancewithICmulti‐transmitterproductprocedures.Referingtothemulti‐transmitterpolicy,multiple‐transmitter(s)andmodule(s)canbeoperatedsimultaneouslywithoutreassessmentpermissivechange.Cetappareiletsonantenne(s)nedoitpasêtreco‐localisésoufonctionnementenassociationavecuneautreantenneoutransmetteur.Thedeviceforoperationintheband5150–5250MHzisonlyforindoorusetoreducethepotentialforharmfulinterferencetoco‐channelmobilesatellitesystems.lesdispositifsfonctionnantdanslabande5150‐5250MHzsontréservésuniquementpouruneutilisationàl’intérieurafinderéduirelesrisquesdebrouillagepréjudiciableauxsystèmesdesatellitesmobilesutilisantlesmêmescanaux.Themaximumantennagainpermittedfordevicesintheband5725‐5850MHzshallbesuchthattheequipmentstillcomplieswiththee.i.r.p.limitsspecifiedforpoint‐to‐pointandnon‐point‐to‐pointoperationasappropriate.legainmaximald’antennepermis(pourlesdispositifsutilisantlabande5725‐5850MHz)doitseconformeràlalimitedep.i.r.e.spécifiéepourl’exploitationpointàpointetnonpointàpoint,selonlecas.IMPORTANTNOTE:ICRadiationExposureStatement:
ThisequipmentcomplieswithICRSS‐102radiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody.Cetéquipementestconformeauxlimitesd'expositionauxrayonnementsICétabliespourunenvironnementnoncontrôlé.Cetéquipementdoitêtreinstalléetutiliséavecunminimumde20cmdedistanceentrelasourcederayonnementetvotrecorps.

Navigation menu