LPS Device LPS-170M 17 Inches TFT LCD Monitor User Manual
LPS Device Co., Ltd. 17 Inches TFT LCD Monitor
User Manual
Advanced TFT Monitor 17 Color inch SXGA TFTLCD LCD Color Monitor USER’S MANUAL 17 inch SXGA TFT LCD Color Monitor Page 1 17 inch SXGA TFT LCD Color Monitor CONTENTS 0. Connections 1. Quick Start 2. U.S. FCC Class B Notice 3. Product Overview 4. Plug & Play 5. Usage Notice 6. Package Checklist 7. Front Button 8. OSD Operation 9. Troubleshooting 13 10. Specifications 14 11. Video Mode Support 15 LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify for any damage resulting from such improper use or sale. The information presented in this document may form a part of quotation or contract under the agreement of both parties. Otherwise, this datasheet is subjected to be changed without notice. Page 2 17 inch SXGA TFT LCD Color Monitor 0. CONNECTIONS Speaker Audio In Audio Out Analog RGB DC in PC VGA / Sound 12V Adapter 1. QUICK START (1) Connect the 15-pin D-sub connector to the VGA port of PC. (2) Connect the opposite side of VGA cable to TFT LCD monitor. (3) Plug in the Audio cables to the proper connecter of your monitor. (4) Plug in the power cord to AC/DC adapter power inlet and 110V / 220V consent. (5) Plug in the 12V DC output to TFT LCD monitor. Page 3 17 inch SXGA TFT LCD Color Monitor (6) Fit the stand part into the stand groove of Monitor (See the following Instruction). (7) Adjust the tilt of your monitor. (8) Turn on PC and TFT LCD monitor. (9) Adjust the display. (SXGA, 1280x1024 pixels, 24 bit color) * Disassembly of Stand To disassemble the stand from your monitor, press down the stand with one hand and hold the handle of Monitor with the other hand. Pull out the monitor from the stand shaking gently the handle of monitor right and left. Do not pull out with excessive strength. It might damage your monitor. 2. U.S. FCC CLASS B NOTICE This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, if it is not installed or used by the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, that could be determined by tuning the equipment on and off, the user is encouraged to try to connect the interference with the following option: • • • • Re-orient or relocate the reception of antenna. Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that which the receiver is connected to. Consult the dealer or an experienced Radio / Television technician for help. Page 4 17 inch SXGA TFT LCD Color Monitor 3. PRODUCT OVERVIEW This 17” SXGA TFT LCD Monitor, accepts standard analog RGB signal. This monitor supports SXGA and lower resolutions at the frame frequency up to 75Hz. Lower resolution modes can be expanded to full screen through the expansion algorithm. The user interface includes Audio, Display, Control, Auto Adjust, and additional features. This monitor contains high-end LCD controller, which have high performance and user friendly interfaces. Fancy design monitor makes your desk simple and luxury. The LCD monitor neither emits harmful rays nor requires space. Moreover, it conforms to VESA DPMS (Display Power Management Signaling) requirement, therefore energy consumption is remarkably little. Actual power consumption of LCD monitor is less than 35 watts during the operation, in contrast CRT monitor. These features guarantee you with safe, clean, and healthy environment. 4. PLUG & PLAY This monitor supports VESA DDC 1/2B requirements, therefore it is truly Plug-andPlay for all PCs. No hardware or software change needed. It finds optimum setting value automatically without any diskette installation by DDC process. • DDC Process Abbreviation of ‘Display Data Channel’. The format of data exchange between Monitor & VGA Card. Page 5 17 inch SXGA TFT LCD Color Monitor 5. USAGE NOTICE Warning Please do not open or disassemble the products, because it may cause electric shock. Please be advised all the warnings, precautions, and maintenance advice as recommended in this user’s manual in order to maximize the life of your monitor. Do: • • • • Turn off the monitor before cleaning its surface. Periodically wipe its surface with a soft and dry cloth. Use the quality and safety-approved AD/DC adapter. Disconnect the power plug from the AC outlet when the product is not in use for long time. Do not expose the monitor to: • • • • Extremely hot, cold, and humid environments during operation. Area susceptible to dust. Direct sunlight Abrasive cleaners, waxes, and solvents Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Page 6 17 inch SXGA TFT LCD Color Monitor 6. PACKAGE CHECKLIST 17” TFT LCD MONITOR * Attention Monitor and stand part are packed disassembled. Please be careful not to drop the stand part when you take the monitor out of protecting styrofoam. User’s Manual AC/DC Adaptor Audio Cable Power Cord VGA Cable Page 7 17 inch SXGA TFT LCD Color Monitor 7. FRONT BUTTON Auto Menu ▼ ▲ ◀ Volume ▶ Power OSD Function Button Function Status Power Power ON/OFF ON/OFF Hot key Green(ON) /Red(Stand by) LED Auto/ (Select) Menu Indicates operation status Orange (Flickering) : No Signal Auto Adjustment/ Select Menu Activate menu/Exit Menu Exit Sub-Menu/ Move to previous Menu ▼▲ Move menu ◀ ▶ Adjust menu Auto Adjustment/ Select Menu Brightness/Contrast/Color Etc…. Move down/up Increase/Decrease value Page 8 Volume Hot Key 17 inch SXGA TFT LCD Color Monitor 8. OSD OPERATION 8.1 BRIGHTNESS CONTROL - This control allows you to make adjustments to brightness of the display screen Menu > ▲ ▼ Move to Brightness Control menu > Auto Button (Selection of Menu) > ◀ ▶ (Increase/Decrease Value) 8.2 CONTRAST CONTROL - This control allows you to make adjustments to the contrast of the display screen 8.3 H-POSITION - Select this control menu, and then use ◀ and ▶ buttons to center the image horizontally on the screen. Page 9 17 inch SXGA TFT LCD Color Monitor 8.4 V-POSITION - Select this control menu, and then use the ◀ and ▶ buttons to center the image vertically on the screen. 8.5 CLOCK - Select this control menu, and then use ◀ and ▶ buttons to optimize screen quality by removing noise. 8.6 CLOCK PHASE - Select this control menu, and then use ◀ and ▶ buttons to adjust the screen image until it looks focused, crisp and sharp. One of the good points of LCD Monitor. Page 10 17 inch SXGA TFT LCD Color Monitor 8.7 COLOR CONTROL - Select this control menu, then scroll to the desired color temperature among 9300K, 6500K or USER for custom setting. In User Mode, adjust R,G,B color control. 8.8 LANGUAGE - Select this control menu, choose from English (ENGLISH), German (DEUTSCH), Spanish (ESPAÑOL), Italian (ITALIANO), French (FRANÇAIS). 8.9 INFORMATION - Select this menu allows you to confirm information of the display. Page 11 17 inch SXGA TFT LCD Color Monitor 8.10 OSD - Select this control menu, and then use the button to select the duration time for the OSD menu. Use the ◀ and ▶ buttons to select the time, to center the OSD image horizontally & vertically on the screen. 8.11 AUTO ADJUST - This control will automatically make adjustments to the horizontal and vertical size, horizontal and vertical position, phase and color. 8.12 AUDIO - Select this control menu, and then use the ◀ and ▶ buttons to increase or decrease audio sound level, mute. This button functions also as “Volume Hot Key”. Page 12 17 inch SXGA TFT LCD Color Monitor 9. Troubleshooting Warning Please do not open the monitor, because it may cause electric shock to the customer. Also, the warranty program may not support the damages, which user causes. When problem persists in spite of trying the following troubleshooting advice, please contact dealer or the repair center listed. Trouble and countermeasure LED doesn’t lit / No image Check if the display is in power saving mode. Check if the display is switched on or the power cable is properly connected. Image is unstable (Flicker, Interference, Noise, etc.) Check if signal cable is secured Check if frame (vertical) frequency of video signal is lower than 75Hz because this monitor can not run over 75Hz. In this case, please change the setting of ‘Display Control Panel’ of Windows to 60Hz, that displays the best performance. Dull image Adjust the Frequency or Phase. Adjust the frame (vertical) frequency to 60Hz. Remove any video signal distributor. Dark or saturated image Adjust the Brightness or Contrast. Page 13 17 inch SXGA TFT LCD Color Monitor 10. Specifications Model 17 inch SXGA TFT LCD Color Monitor Display Type Color Pitch Screen size Back light Resolution (max.) Contrast ratio Brightness 17” Color Active Matrix TFT LCD 16.7Million (8 bit/color) 0.264 x 0.264 mm 337.9(H) x 270.3(V) mm 4 CCFLs 1280 x 1024(SXGA) at 60 to 75Hz (Optimum 60Hz) 450:1 250 cd/m2 Video Sync frequency Input signal Viewing angle Vertical: 56 ~ 75Hz (Optimum 60Hz) Horizontal: 31.5 ~ 80KHz Analog RGB 0.714 VP-P, 15 Pin D-sub type Up/Down: 60º / 60º Right/Left: 70º / 70º Audio Speaker 2W x 2 Compatibility Plug & Play Compatibility Power Management VESA DDC 1/2B VESA / IBM / MAC VESA Standard, DPMS Operating Conditions Power Consumption Temperature Humidity User control OSD Operating: 35 watt max. Stand-by: 3.5 watt max. Operating: 0 ºC ~ 40 ºC Storage: -20 ºC ~ 60 ºC Operating: 10% ~ 85% R.H. Non-Operating: 90% R.H. Max. Auto / Menu / Down/ Up/ Left / Right/ etc. Mechanical Size Weight Packed : 430 (W) x 190 (D) x 440 (H) mm Packed : 7 kgs Page 14 17 inch SXGA TFT LCD Color Monitor 11. VIDEO MODE SUPPORT The modes are detected when presented to the input and previous alignments for setup are automatically recalled. A true multi-sync monitor emulation is implemented. The factory preset supported modes include: Mode*1 Resolution H-freq. Pixel freq. Remarks*1 VGA 640 x 350 70Hz 31.47KHz 25.175MHz VESA Standard VGA 720 x 400 59.940HZ 31.469KHZ 25.175MHZ IBM VGA 3H VGA 640 x 480 60Hz 31.5KHz 25.175MHz Industry Standard VGA 640 x 480 72Hz 37.9KHz 31.500MHz VESA Standard VGA 640 x 480 75HZ 37.5KHZ 31.500MHZ VESA Standard SVGA 800 x 600 60Hz 37.9KHz 40.000MHz VESA Guidelines SVGA 800 x 600 72Hz 48.1KHz 50.000MHz VESA Standard SVGA 800 x 600 75HZ 46.9KHZ 49.500MHZ VESA Standard XGA 1024 x 768 60Hz 48.4KHz 65.000MHz VESA Guidelines XGA 1024 x 768 70Hz 56.5KHz 75.000MHz VESA Standard XGA 1024 x 768 75HZ 60KHZ 78.750MHZ VESA Standard SXGA 1280 x 1024 60Hz 64.0KHz 108.000MHz VESA Standard SXGA 1280 x 1024 75HZ 80KHZ 135.000MHZ VESA Standard Notes: 1. 2. Refresh rate All mentioned modes are non-interlaced. The maximum and minimum frame rates are determined by the TFTLCD. Factory preset modes are overwritten by additional user alignments for automatic recall. At all times it remains possible to recall the initial factory presets. Page 15 17 inch SXGA TFT LCD Color Monitor WARRANTY CARD Warranty Period 1 year 1. 2. 3. This Product is manufactured strict quality control and inspection process. This Product is only guaranteed under the condition stated in this warranty card. If there are any product faults on proper using, period of one (1) year after the purchase will be under the warranty (Free After Service). (If there are any product faults on payable service, the service will be charged.) Compensational Service * User’s miss-use. (Fault of using Electricity and etc..) * Defects or damage by Natural Disaster (Fire, salt water, flood and etc..) * Defects or damage by falling after installed. * Inside remodeling, disjointing, servicing and etc. by users or repairers without permission. * Over parts life (lamps, consumption parts and etc..) 4. Free Warranty period will be started from first date of purchase. 5. This Warranty card valid on domestic and will not be issued again. 6. Please contact the agent or store when there’s uncommon happened. 7. When you request for the service, please provide this warranty card with all the details filled. When you ask for the service 1. Firstly, read the user’s manual. 2. Problem occurs continuously, don’t use the product and contact the service center. Service Center Manufacturer : LPS DEVICE CO., LTD. Address : Rm. 606, Joongang Induspia II, 144-5, Sandaewon-Dong, Joongwon-Gu, Sungnam-Si, Kyunggi-Do, Korea Tel : 82-31-737-6300~5 Fax : 82-31-737-6307 Http://www.lpsdevice.com E-mail : support@lpsdevice.com Page 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:10:06 17:12:23+09:00 Modify Date : 2003:10:06 17:12:23+09:00 Page Count : 16 Creation Date : 2003:10:06 08:12:23Z Mod Date : 2003:10:06 08:12:23Z Producer : Acrobat Distiller 5.0 (Windows) Author : schong Metadata Date : 2003:10:06 08:12:23Z Creator : schong Title : Microsoft PowerPoint - .... - ....17....MANUAL.pptEXIF Metadata provided by EXIF.tools