La Crosse Technology TX141-B Wireless Thermometer User Manual SPECIFICATION

Download:
Mirror Download [FCC.gov]
Document ID	1949886
Application ID	frZPNI4SSt7WFj4l3xrE4g==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.48kB (2418540 bits)
Date Submitted	2013-04-24 00:00:00
Date Available	2013-04-24 00:00:00
Creation Date	2013-04-17 09:33:21
Producing Software	Microsoft® Word 2010
Document Lastmod	2013-04-22 18:50:17
Document Title	SPECIFICATION:
Document Creator	Microsoft® Word 2010
Document Author:	carol

Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
TRANSMITTER SIGNAL STRENGTH INDICATOR
Wireless Thermometer
INTRODUCTION
Temperature at a glance! Everything is at your fingertips with this
Wireless Thermometer: Indoor/Outdoor temperature with MIN/MAX
readings in Fahrenheit or Celsius, outdoor temperature trend arrow,
and manual set time.
SETUP INSTRUCTIONS STEP BY STEP
STEP 1:
Remove battery cover from the Wireless
Thermometer.
Insert 2 NEW AA batteries (not included) into
the back of the Wireless Thermometer.
Observe the correct polarity (see marking
inside the battery compartment).
The Wireless Thermometer will light up and
show, indoor temperature, and time (12:00).
STEP 2:
Ensure that the transmitter is within 10 feet of the
Wireless Thermometer.
Remove battery cover from TX141-B transmitter:
Slide the battery cover down and lift off the front.
Insert 2 NEW AA batteries into the transmitter.
Observe the correct polarity.
Within 3 minutes the Wireless Thermometer will show
readings in the outdoor temperature area on the LCD.
Note: Allow the Wireless Thermometer and the
transmitter to stay within 10 feet of each other for the first 15
minutes of set up.
Do Not Mix Old and New Batteries
After the batteries are inserted, the Wireless Thermometer will
search for the outdoor temperature transmitter for 3 minutes.
The antenna symbol
will flash during reception, and
temperature display will be dashes
---“.
“
No antenna symbol will show during RF (radio frequency)
synchronization.
If synchronization fails once, the antenna will lose one bar.
If synchronization fails twice, the antenna will lose two bars.
If RF (radio frequency) reception fails five times, the antenna
symbol will be shown as .
The antenna will show full display with successful
RF (radio frequency) reception.
FAHRENHEIT/CELSIUS
Press the SET/°F/°C button to select Fahrenheit or Celsius
temperature
readout.
MAXIMUM/MINIMUM TEMPERATURE READINGS
The Wireless Thermometer: will show the daily minimum and
maximum temperatures each day starting at midnight (12:00 AM).
The temperature station automatically resets the min/max
temperatures at midnight (12:00 AM).
TROUBLE SHOOTING
If the Wireless Thermometer does not display the outdoor
temperature after 3 minutes, remove the batteries from both units
and start the setup process again.
If the outdoor temperature does not show up after a second
attempt, please slide open the battery cover of the outdoor
transmitter to reveal the TX button. Push down on the TX button
for 3 seconds to send a wireless signal to the Wireless
Thermometer.
For optimal 433 MHz signal reception, the outdoor transmitter
should be placed within 200 feet (60 meters) from the indoor
Wireless Thermometer.
Note: Use Alkaline batteries
(or Lithium for temperatures below -28.8°C / -20°F).
VIEW MINIMUM: Press MAX/MIN button to show the minimum
temperature record.
RESET MINIMUM: With the minimum temperatures displayed,
press and hold the MAX/MIN key for 2 seconds to manually clear the
MIN records in memory.
SET TIME
The SET/°F/°C button moves through the program menu. The
MIN/MAX/+ button changes the value.
12/24-HOUR TIME: Hold the SET/°F/°C button for 2 seconds.
12H will flash. Press and release the MIN/MAX/+ button to select
24-hour time format. Press and release the SET button once to
move to the hour.
HOUR: The Hour will flash. Press and release the MIN/MAX/+
button until the correct hour is shown. Press and release the SET
button once to move to the minutes.
MINUTES: The Minutes will flash. Press and release the
MIN/MAX/+ button until the correct minutes are displayed. Press
and release the SET button once more to exit the program menu.
VIEW MAXIMUM: Press MAX/MIN key again, to show the
maximum temperature records. In maximum memory display mode,
RESET MINIMUM: With the maximum temperatures displayed,
press and hold the MAX/MIN key for 2 seconds to manually clear the
MAX records in memory.
TEMPERATURE TREND ICONS
The outdoor temperature trend indicators will update every 30
minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rising more than 1°C/ 2°F in the past three
hours
Temperature has not changed more than 1°C/ 2°F in the
past three hours.
Temperature falling more than 1°C/ 2°F in the past three
hours
The temperature trend indicators are shown next to the indoor
temperature and outdoor temperature readings.
Improper use or unauthorized opening of housing will void the
warranty.
If the unit does not work properly, change the batteries and/or
check the a/c cord connection.
SPECIFICATIONS
WARRANTY INFORMATION
Limited Warranty: Springfield warrants this instrument to be free
from defects in workmanship and material for a period of 1 year from
date of purchase, and will repair or replace it at our option, without
charge. Please call 1-800-661-6721
POSITIONING THE TEMPERATURE TRANSMITTER
The remote temperature transmitter should be mounted vertically to
avoid damage. Place both units in the desired shaded locations, and
wait approximately 1-hour before permanently mounting the
transmitter to ensure that there is proper reception. The outdoor
temperature transmitter is water resistant, not waterproof and should
not be placed anywhere it will become submerged in water or
subject to standing water or snow.
WALL MOUNT
Choose a location for the transmitter that is within range of the
Wireless Thermometer and under an overhang for accuracy.
Option 1:
Install one mounting screw (not included) into a wall
leaving approximately ½ of an inch (12.7mm)
extended.
Place the transmitter onto the screw, using the
hanging hole on the backside.
Gently pull the transmitter down to lock the screw into
place.
Option 2:
Insert the mounting screw (not included) through the front of the
transmitter and into the wall.
Tighten the screw to snug (do not over tighten).
To achieve a true temperature reading, mount where direct
sunlight cannot reach the outdoor transmitter. Mount the outdoor
transmitter on a North-facing wall or in any well shaded area.
Under an eave or deck rail work well. The maximum transmitting
range in open air is over 200-feet (60 meters). Obstacles such as
walls, windows, stucco, concrete, and large metal objects can
reduce the range. Place the transmitter at least 6 feet in the air to
improve signal transmission.
CARE AND MAINTENANCE
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Do not expose the Wireless Thermometer: to extreme
temperatures, vibration or shock.
Keep Wireless Thermometer: dry.
Clean Wireless Thermometer: with a soft damp cloth. Do not use
solvents or scouring agents.
The Wireless Thermometer: is not a toy. Keep it out of reach of
children.
The Wireless Thermometer: is not to be used for medical purpose
or for public information, but is determined for home use only.
The specifications of this product may change without prior notice.
Indoor Temperature:
Range:
Resolution:
0°C to + 50°C (32°F to 122°F)
0.1°C/ 0.2°F
Outdoor Temperature:
Range:
Resolution:
-40°C to + 60°C (-40°F to 140°F)
0.1°C/ 0.2°F
Power:
CA85152
Wireless Thermometer:
2-AA LR6 alkaline battery
(not included)
2-AA LR6 alkaline battery
(not included)
TX141-B Transmitter:
Battery life is over 24 months when
using reputable battery brands
Battery Life:
Dimensions:
CA85152
Wireless Thermometer:
76 x 34 x 106 mm
(3”L x 1.36”W x 4.17”H)
TX141-B Transmitter:
129 x 40.13 x 21mm
(5.08” H x 1.58” W x 0.83” D)
CANADA STATEMENT
This device complies with Industry Canada RSS-210. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device.
Product Registration:
www.lacrossetechnology.com/support/register
On the Web at:
www.lacrossetechnology.com/ca85152
Protected under U.S. Patents:
5,978,738
6,076,044
6,597,990
For Warranty Service:
Springfield Instruments Canada
Warranty
5151 Thimens Blvd
St Laurent, Quebec H4R 2C8
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with
any other antenna or transmitter. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized changes or modifications to this equipment. Such
changes or modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form,
even in part, or duplicated or processed using electronic, mechanical
or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it
contains is regularly checked and corrections are included in
subsequent editions. We disclaim any responsibility for any technical
error or printing error, or their consequences.
All trademarks and patents are recognized.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2013:04:17 09:33:21-05:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2013:04:22 18:50:17+08:00
Metadata Date                   : 2013:04:22 18:50:17+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19995 bytes, use -b option to extract)
Producer                        : Microsoft® Word 2010
Format                          : application/pdf
Creator                         : carol
Title                           : SPECIFICATION:
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 297.010811
Max Page Size H                 : 210.015605
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Arial
Font Family                     : Arial, Arial, Arial
Font Face                       : Regular, Bold
Font Type                       : Open Type, Open Type, Unknown
Font Version                    : Version 3.06, Version 3.06, Version 3.12
Font Composite                  : False, False, False
Font File Name                  : ARIAL.TTF, ARIALBD.TTF, simsun.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Rendition Class                 : proof:pdf
Document ID                     : uuid:58e2f964-c645-42ed-b4a6-717834671e7b
Instance ID                     : uuid:9a7cb2d0-effa-4436-9611-1c216fd5b49a
Page Count                      : 2
For                             : Administrator,
Bounding Box                    : 0 0 842 596
Container Version               : 11
Creator Version                 : 14
Language                        : en-US
Author                          : carol
Image Height                    : 596
Image Width                     : 842
Image Size                      : 842x596
Megapixels                      : 0.502

EXIF Metadata provided by EXIF.tools