LabelZone Zebra Gk420D 980608 001_rC_GK420dUGen User Manual

2017-09-13

• About This Document
  • Who Should Use This Document
  • How This Document Is Organized
  • Contacts
  • Document Conventions
• Contents
• Introduction
  • GK Series Thermal Printers
  • What’s in the Box?
    • Unpack and Inspect the Printer
    • Your Printer
    • Printer Features
    • Operator Controls
• Getting Started
  • Attaching Power
  • Loading Roll Media
    • Preparing Media
    • Placing the Roll in the Media Compartment
  • Printing a Test (Printer Configuration) Label
  • Pre-install Windows® Printer Drivers
  • Connecting your Printer to a Computer
    • Interface Cable Requirements
  • After Your Printer is Connected
• Print Operations
  • Determining Printer Configuration
    • Localizing the Printer Status Configuration Label
  • Long Term Printer In-activity or Storage
  • Thermal Printing
  • Modes of Printing
  • Print Media Types
    • Determining Thermal Media Types
  • Replacing Supplies
  • Adjusting the Print Width
  • Adjusting the Print Quality
  • Media Sensing
  • Printing on Fan-Fold Media
  • Printing with Externally Mounted Roll Media
  • Fonts and Your Printer
    • Localizing the Printer with Code Pages
    • Identifying Fonts in Your Printer
  • Stand Alone Printing
  • Sending Files to the Printer
  • Print Meter
  • EPL Line Mode
• Printer Options
  • Label Dispenser Option
  • ZebraNet® 10/100 Internal (Wired) Print Server Option
    • Printer Network Configuration Status Label
  • Zebra® KDU — Printer Accessory
  • KDU Plus™ — Printer Accessory
  • ZBI 2.0™ — Zebra Basic Interpreter
• Maintenance
  • Cleaning
    • Cleaning the Printhead
    • Media Path Considerations
    • Platen Cleaning and Replacement
    • Other Printer Maintenance
  • Replacing the Printhead
    • 1. Align the printhead to plug the left and right connectors into the wire bundles.
• Troubleshooting
  • Status Light Descriptions
  • Status Light Error Resolutions
  • Print Quality Problems
  • Manual Calibration
  • Troubleshooting Tests
    • Printing a Configuration Label
    • Recalibration
  • Resetting the Factory Default Values
  • Communications Diagnostics
  • Feed Button Modes
• Appendix: Interface Wiring
  • Universal Serial Bus (USB) Interface
  • Parallel Interface
  • Ethernet Interface
  • Serial Port Interface
• Appendix: Dimensions
  • External GK Printer Dimensions
• Appendix: ZPL Configuration
  • Managing the ZPL Printer Configuration
  • ZPL Configuration Status to Command Cross-reference
  • Printer Memory Management and Related Status Reports