USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 32077 |
| Application ID | Gz3bcBEKxIf0lktPJhkYbg== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 2.67kB (33320 bits) |
| Date Submitted | 1999-04-13 00:00:00 |
| Date Available | 1999-05-10 00:00:00 |
| Creation Date | 2001-06-29 06:46:10 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-29 06:46:11 |
| Document Title | USERS MANUAL |
USER MANUAL Xwave 5.1 Channel Enhancement Module January 1999 A15-0159-110 QS7785PF Daughter Board The information in this document is subject to change without notice Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: The user may find the following booklet prepared by the Federal Communications Commission helpful: " How to Identify and Resolve Radio-TV Interference Problems. " This booklet is available from the U.S. Government Printing Office, Washington, DC 20402 Stock No. 004-000-00345-4. All brands and trademarks are registered by their respective companies. Page - 1 QS7785PF Daughter Board TABLE OF CONTENTS DESCRIPTION ....................................................................................... 3 FEATURES ........................................................................................................................... 3 Hardware Features........................................................................................................................3 SYSTEM REQUIREMENTS ..................................................................................................... 3 Sound Card ....................................................................................................................................3 BOARD FIGURE ................................................................................................................... 3 CONNECTORS...................................................................................................................... 4 External Connectors ......................................................................................................................4 Internal Connectors .......................................................................................................................4 JUMPER SETTINGS FOR JP1 ................................................................................................. 4 HARDWARE INSTALLATION ........................................................... 5 HANDLING THE DAUGHTER BOARD ..................................................................................... 5 INSTALLING THE DAUGHTER BOARD ................................................................................... 5 Connecting the right devices..........................................................................................................6 Page - 2 QS7785PF Daughter Board DESCRIPTION The QS7785 is a 3D audio processor IC that lets you upgrade your sound card’s stereo output to 5.1 channel audio output. In addition you can connect your MIDI device directly to this daughter board. Features Hardware Features • 3D synthesized surround sound for left and right speakers • 3D stereo sound enhanced for left and right front speakers • Center and subwoofer speaker outputs System Requirements Sound Card • Sound Blaster 16 or compatible sound card required with a 16-pin feature connector. Board Figure Spacer Support Center Speaker and Subwoofer J1 Rear Speakers J2 Front Speakers J3 MIDI IN J4 MIDI OUT J5 Spacer Support JP1 SPDIF OUT J6 Spacer Support Figure - 1 Page - 3 QS7785 Audio Processor Spacer Support QS7785PF Daughter Board Connectors This Daughter Board includes six external connectors and one Jumper switch. External Connectors J1: ................ ∅ 3.5mm Phone Jack for CENTER SPEAKER and SUBWOOFER J2: ................ ∅ 3.5mm Phone Jack for REAR SPEAKERS J3: ................ ∅ 3.5mm Phone Jack for FRONT SPEAKERS J4: ................ External Connector for MIDI INPUT J5: ................ External Connector for MIDI OUTPUT J6: ................ External Connector for SPDIF OUTPUT Internal Connectors J1: ................ 3-pin Jumper Jumper Settings for JP1 This Daughter Board includes a 3-pin Jumper to select between “5.1 Channels” or “2-Channel Enhancement”. 5.1 Channels (using Connector J1/J2/J3 for 6 Speakers) 2-Channel Enhancement (using Connector J3 for the FRONT Speakers) Page - 4 QS7785PF Daughter Board HARDWARE INSTALLATION Handling the Daughter Board WARNING: " Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it. Follow these precautions when handling the board: • Before you open the static protective bag, touch it to a metal expansion slot cover on the back of your computer. This drains static electricity from the package and from your body. • Do not touch any exposed printed circuitry after opening the package. • Keep other people from touching the board. They might have a static-electricity build-up. • Limit your movement. Movement causes a build-up of static electricity. Installing the Daughter Board Follow the steps below to install the daughter board into your computer. 1.) 2.) 3.) 4.) 5.) 6.) 7.) 8.) Turn off the system and all peripheral devices. Disconnect the power cord and all peripheral devices from the system. Remove the system cover and identify two unused PCI slots. Unscrew both slot cover plates. Before you insert your PCI sound card into the PCI expansion slot connect the daughter board’s 16-pin expansion connector to the upgrade connector of your sound card. Make sure the 4 plastic bolts are connected to the sound card properly. (To install your sound card, please refer to your PC user’s manual, and sound card’s manual respectively for specific instructions.) Insert now your sound card with the daughter board into the two PCI expansion slots. Press down gently on the top edges of the sound card to ensure that all connecting points are seated securely. Anchor the board’s mounting brackets using the screws removed earlier. Replace the cover of your PC and reconnect the power cord. Page - 5 QS7785PF Daughter Board Connecting the right devices 1.) 2.) 3.) 4.) 5.) 6.) First attach the provided cable of your SUBWOOFER and CENTER SPEAKER to the 3.5mm Phone Jack J1 on the daughter board. Secondly attach the provided cable of your REAR SPEAKERS to the 3.5mm Phone Jack J2 on the daughter board. Then attach the cable of your FRONT SPEAKERS to the 3.5mm Phone Jack J3 on the daughter board. Connect your MIDI IN cable to the MIDI IN connector J4 on your daughter board. After this step connect your MIDI OUT cable to the MIDI OUT connector J5 on your daughter board. Finally connect your Dolby Digital Surround Sound receiver to the S/PDIF connector J6 on your daughter board. NOTE: To avoid double processing of your audio source please turn off or disable all other effects of your audio source. A15-0159-110 Page - 6 QS7785PF Daughter Board MEMO Page - 7 QS7785PF Daughter Board MEMO Page - 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:06:29 06:46:10 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:06:29 06:46:11-04:00 Page Count : 9EXIF Metadata provided by EXIF.tools