Labway F031S6 IEEE 1394 INTEGRATED PCI HOST ADAPTOR User Manual Manual

Labway Corporation IEEE 1394 INTEGRATED PCI HOST ADAPTOR Manual

USER MANUAL

IEEE1394 Integrated PCIHost AdapterUser’s ManualMay 2000
2DescriptionThis 3-port IEEE1394 host adapter is a high speed input/output device for connectingperipherals to a computer, the IEEE1394 is one of the fastest standard ever developed,multimedia devices such as video camcorders and other high-speed devices can takeadvantage of this standard.This host adapter is OHCI compliant thus no driver is needed under Widnows® 98 SecondEdition , its convenient I/O offers “hot plug” feature, it is not necessary to turn off the powerwhen attach/detach any IEEE1394 devices. The IEEE-1394 is a peer-to –peer technology,which means you can connect other systems on the same 1394 bus, two or more computerscan share the same IEEE-1394 devices when they are daisy-chained on the same 1394 bus.Features• 3-Port IEEE1394 host adapter.• Compatible with standard Microsoft 1394 driver stack.• P1394a 3.0 compliant• OHCI 1.0 compliant• PCI 2.1 compliant• 100 to 400 Mbits/s transmission speed• High speed digital serial bus supporting peer-to-peer communication and hot plug-and-play with 6-wire cable and connector.• Support for efficient data flow (large FIFO’s, context support)• Implemented in digital 3.3v, CMOS process technology, 5v tolerant buffers
3 1 Card Figurelllllll llllllllllllllllllllllllllllllllLUCENTFW323E2PROMPORT1PORT2JP1+5V +12VGND power ConnectorPower Connectornecessary.2Installing the IEEE 1394 Host Adapter1. Power off the system and all peripheral devices. Unplug all power cords from thepower utility outlets. Momentarily touch the chassis of the system unit with your bare hand to discharge3. 4. 5. install it into the expansion slot.6. Secure the host adapter with the screw removed earlier.
47. Put back the system unit cover.8. Plug all power cords into power utility outlets.9. Power on the system and install the appropriate software driver..3 Installing the IEEE-1394 Host Adapter under Win98Second Edition** You have to use the Windows® 98 Second Edition to install the IEEE-1394 Host Adapter ***1 After you have inserted the IEEE-1394 host adapter into you computer, turn on the power,the Win98SE will find the device automatically and the “Add New Hardware Wizard” dialogbox will appear, please click “Next” to continue.2 The next “Add New Hardware wizard” dialog box appears, please select “Search for thebest driver for your device [Recommended]” and click “Next”3 Windows will ask you to specify the driver location, please specify where your Windowssystem disk is located (ex. Win98SE) and click “NEXT”4 Windows will tell you that the IEEE-1394 host adapter has been found in the specifiedlocation, please click “NEXT” to continue.5 At the last step, Windows will you inform you that the installation has finished, please click“Finish” to finish installing the IEEE-1394 driver.May.2000
FCC COMPLIANCE STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.INFORMATION TO USER:This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particularinstallation; if this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:1. Reorient / Relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit difference from that to which the receiver isconnected.4. Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications not expressly approved by the manufacturer responsible forcompliance could void the user’s authority to operate the equipment

Navigation menu