Laird Connectivity 1005 2.4 GHz Bluetooth Low Energy Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3421966
Application ID	17XZIAsy0moSHiihGYA20Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.78kB (922225 bits)
Date Submitted	2017-06-12 00:00:00
Date Available	2017-06-12 00:00:00
Creation Date	2017-04-14 11:40:28
Producing Software	Microsoft® Word 2016
Document Lastmod	2017-06-06 12:41:26
Document Title	Users Manual
Document Creator	Microsoft® Word 2016
Document Author:	Sue White

Bluetooth Test Setup
SaBLE-x-R2 Module
Version 1.0
Bluetooth Test Setup
SaBLE-x-R2 Module
REVISION HISTORY
Version
1.0
Date
04/12/2017
Notes
Initial Release
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
Approver
RG
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
CONTENTS
Hardware Test Set-Up .......................................................................................................................... 4
1.1.
PCBA Preparation .................................................................................................................... 4
Software Test Setup ............................................................................................................................. 5
2.1.
Dev Board Setup with PC ......................................................................................................... 5
2.2.
Bluetooth RF Eval Tool Software .............................................................................................. 6
2.2.1.
BLE Transmit & Receive ............................................................................................................ 7
Contacting LSR/Laird .......................................................................................................................... 10
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
1 HARDWARE TEST SET-UP
1.1. PCBA Preparation
#1
#2
#4
#5
#3
Figure 1: SaBLE-x-R2 Dev Board PCBA
Note: #1 Keyed Power Connector: Red (+), Black (-);
▪
▪
VMIN = 1.8V, VNOM = 3.3V, VMAX = 3.8V
TempMIN = -40C, TempNOM = 25C, TempMAX = 85C
#2 Switch 6 and 7 Set High to Enable UART communication (S7 Switch)
#3 Current sense jumper must be in place (J7 Header)
#4 Switch set to EXT to supply external power from #1 (S4 Switch)
#5 All switches set to off position (S5 and S6 Switch)
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
2 SOFTWARE TEST SETUP
2.1. Dev Board Setup with PC
▪
Apply external power via J6 on the PCBA (#1)
▪
Make sure all switches on S5 and S6 are set OFF on the PCBA (#5)
▪
Set switch 5 and 6 ON on S7 (#2)
▪
Set Switch to EXT (#4)
Figure 2: COM Identifier
▪
Run Bluetooth RF Eval Tool Version 8.7.0.0 (Provided by LSR)
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
2.2. Bluetooth RF Eval Tool Software
▪
Pick the appropriate COM port from Device Manager. Choose the appropriate Chipset which in this
example is CC26XXR2F.
▪
Connect the device. The output will be displayed in the log window.
Figure 3: Device Setup and Initial Output Reading
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
2.2.1. BLE Transmit & Receive
▪
The channel index is determined by:
Freq (MHz) = 2402 + 2k, for k = 0, 1, 2 … 39 (decimal)
Ex: k = 0, Freq = 2402MHz; k = 19, Freq = 2440MHz; k = 39, Freq = 2480MHz
▪
Select the BLE 5.0 Option under the BLE Tab.
Figure 4: BLE Transmit & Receive Setup
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
▪
Select the necessary data rate options based on what BLE version is being tested for Transmit testing.
Click on the Enhanced Tx Start button and the Test End to start and stop the transmitter.
Figure 5: BLE Transmit Testing
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
▪
Select the necessary data rate options based on what BLE version is being tested for Receive testing.
Click on the Enhanced Rx Start button and the Test End to start and stop the transmitter.
Figure 6: BLE Receive Testing
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Bluetooth Test Setup
SaBLE-x-R2 Module
3 CONTACTING LSR/LAIRD
Headquarters
LSR/Laird
W66 N220 Commerce Court
Cedarburg, WI 53012-2636
USA
Tel: 1(262) 375-4400
Fax: 1(262) 375-4248
Website
https://www.lsr.com/
Technical Support
http://info.lsr.com/contact
Sales Contact
sales@lsr.com
© Copyright 2017 Laird. All Rights Reserved. Patent pending. Any information furnished by Laird and its agents is believed
to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials or products rests with the end user since Laird and its agents cannot be aware of all potential
uses. Laird makes no warranties as to non-infringement nor as to the fitness, merchantability, or sustainability of any Laird
materials or products for any specific or general uses. Laird, Laird Technologies, Inc., or any of its affiliates or agents shall
not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms
and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. When used as a
tradename herein, Laird means Laird PLC or one or more subsidiaries of Laird PLC. Laird™, Laird Technologies™,
corresponding logos, and other marks are trademarks or registered trademarks of Laird. Other marks may be the property
of third parties. Nothing herein provides a license under any Laird or any third party intellectual property right.
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
10
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Industry Canada statement:
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2016
Creator                         : Sue White
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2017:04:14 11:40:28-05:00
Modify Date                     : 2017:06:06 12:41:26+08:00
Document ID                     : uuid:91BD7075-AD50-4D94-8507-5905B4115539
Instance ID                     : uuid:91BD7075-AD50-4D94-8507-5905B4115539
Author                          : Sue White

EXIF Metadata provided by EXIF.tools