Laird Connectivity CL2510GT FREQUENCY HOPPING SPREAD SPECTRUM TRANSCEIVER User Manual UserMan CL2510GT

Download:
Mirror Download [FCC.gov]
Document ID	1261680
Application ID	9IDLJuPlJMzQt9p3Kb1CEA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.67kB (20861 bits)
Date Submitted	2010-04-05 00:00:00
Date Available	2010-04-05 00:00:00
Creation Date	2010-04-02 15:34:48
Producing Software	Acrobat Distiller 8.2.0 (Windows)
Document Lastmod	2010-04-02 15:34:48
Document Title	Microsoft Word - UserMan CL2510GT
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Scot

CL2510 Preliminary Compliance Section
Agency Identification Numbers
Part #
US/ FCC
Canada/ IC
CL2510-100-422
KQL-CL2510GT
2268C-CL2510GT
CL2510-100-232
KQL-CL2510
2268C-CL2510
Approved Antenna List
•
The CL2510-100-232 and CL2510-100-422 have been designed to operate with the antennas listed
below. The required antenna impedance is 50 ohms. The customer is free to choose another vendor’s
antenna of like type and equal or lesser gain as an antenna appearing in the tables and still maintain
compliance.
. CL2510-100-232
Item
Part Number
Mfg.
Type
Gain (dBi)
ID2450-RS36
Laird Technologies
Panel
IG2450-RS36
Laird Technologies
Omni
Item
Part Number
Mfg.
Type
Gain (dBi)
ANT-DB1-RMS-RPS7
Linx Technologies
Monopole
S151AH-2450S
Nearson
Omni
CL2510-100-422
ANTENNA REQUIREMENTS
To reduce potential radio interference to other users, the antenna type and gain should be chosen so that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Caution: Any changes or modifications not expressly approved by Laird Technology could void the user’s
authority to operate the equipment.
FCC/ IC REQUIREMENTS
This equipment has been approved for mobile applications where the equipment should be used at distances
greater than 20 cm from the human body. Operation at distances of less than 20 cm would require additional
RF exposure evaluation, including SAR requirement according to FCC RF Exposure guideline.
Additional information about RF exposure and compliance in Canada can be found at Industry Canada’s
website: www.ic.gc.ca
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does not cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
•
•
•
Re-orient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to an outlet on a circuit that is different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:04:02 15:34:48-05:00
Create Date                     : 2010:04:02 15:34:48-05:00
Format                          : application/pdf
Title                           : Microsoft Word - UserMan CL2510GT
Creator                         : Scot
Producer                        : Acrobat Distiller 8.2.0 (Windows)
Document ID                     : uuid:2b93137f-3c3a-4b35-ac74-f5de5069dbf4
Instance ID                     : uuid:3a4ab5db-4d23-443f-995e-8e4170889c4a
Page Count                      : 1
Author                          : Scot

EXIF Metadata provided by EXIF.tools