Landis Gyr Technology EC6R3S2 Commercial Gas Meter Module User Manual Installation Guide Part 1

Landis+Gyr Technology, Inc. Commercial Gas Meter Module Installation Guide Part 1

UserManual.wiki >

Landis Gyr Technology >

EC6R3S2 User Manual >

Installation Guide Part 1 HTML Version

1. Installation Guide Part 1
2. Installation Guide Part 2

Installation Guide Part 1

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Certification Exhibit

FCC ID: R7PEC6R3S2

IC: 5294A-EC6R3S2

FCC Rule Part: 15.247

IC Radio Standards Specification: RSS-210

ACS Report Number: 08-0493 - 15C

Manufacturer: Cellnet Technology, Inc.

Model: 25-1079

Installation Guide (Part 1)

Cellnet Gas Module and Meter

Installation Guide

Cellnet

All

rights reserved.

Proprietary

Rights

Notice

This

manual

unpublished

work

and

contains

the

trade

secrets

and

confidential

information

Cellnet,

which

are

not

to be

divulged

third

parties

and

may

not

reproduced

transmitted

whole

part,

any

form

any

means,

electronic

mechanical

for

any

purpose,

without

the

express

written

permission

Cell

net

All

rights

designs

inventions

disclosed

herein,

including

the

right

manufacture

are

reserved

Cellnet.

The

information

contained

in this

document

subject

change

without

notice. Cell

net

reserves

the

right

change

the

product

specifocations

any time

without

incuring

any

obligations.

Trademarks

Used

This

Manual

Cell

net

is a

registered

trademark

Cell

net

Innovations,

Inc.

Other

brands

product

names

are

the

trademarks

registered

trademarks

their

respective

holders.

Cellnet Gas Meter Module Installation Guide

<CO-0089-GB-12.08>

Cellnet

30000

Mill

Creek Avenue

Suite 100

Alpharetta, GA 30022

Tel:

(678) 258-1500

Fax:

(678) 258-1550

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ ááá

TABLE OF CONTENTS

PREFACE

^_lrq=qefp=drfab= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJN

tÜç=pÜçìäÇ=rëÉ=qÜáë=dìáÇÉ= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJN

eçï=qÜáë=dìáÇÉ=fë=lêÖ~åáòÉÇ==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJO

qvmldo^mef`^i=`lksbkqflkp= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJP

`lkq^`qfkd=qb`ekf`^i=prmmloq= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJQ

qÉäÉéÜçåÉ=^ÅÅÉëë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJQ

bã~áä=^ÅÅÉëë= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJQ

lêÇÉêáåÖ=mìÄäáÅ~íáçåë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJQ

mìÄäáÅ~íáçå=`çããÉåíë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJQ

obi^qba=mr_if`^qflkp==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==mJR

CHAPTER 1 PRE-INSTALLATION

p^cbqv=lsbosfbt==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJN

d^p=jbqbo=fkpq^ii^qflk=^ka=jlarib=obqolcfq=qlli=ifpq= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJO

oc=_rpqbop==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP

e~åÇÜÉäÇë=Ee~åÇÜÉäÇF= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJQ

fåëí~ää=j~íÉêá~ä=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJQ

jbqbo=`ljm^qf_fifqv=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJQ

`ljmif^k`b= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJR

CHAPTER 2 USING THE HANDHELD DEVICE

j~åìÑ~ÅíìêÉê=açÅìãÉåí~íáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJN

aáëéä~ó==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO

hÉóÄç~êÇ==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO

mêçÖê~ã=`çåîÉåíáçåë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJP

rpfkd=qeb=a^m=e^kaebia=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJQ

dÉííáåÖ=pí~êíÉÇ=ïáíÜ=íÜÉ=e~åÇÜÉäÇ= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJQ

pq^ka^oa=jbqbo=fkpq^ii^qflk=^kaLlo=jlarib=obqolcfq= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJR

`ÜÉÅâ=oçìíÉ=pí~íìë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJR

`ÜÉÅâ=^ÇÇêÉëë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJS

ríáäáíó=cáÉäÇ=a~í~=`çääÉÅíáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJU

jÉíÉê=fåÑçêã~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJV

mêçÖê~ã=íÜÉ=jÉíÉê=jçÇìäÉ= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNN

pmb`f^i=`^pbp= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNR

jÉíÉê=oÉ~ÇáåÖ=lìí=çÑ=o~åÖÉ= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNR

jÉíÉê=fa=`çåÑáêã~íáçå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNT

`Ü~åÖÉ=jÉíÉê=fa= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNT

pâáéë= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNU

lqebo=cb^qrobp=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJON

mêçÄäÉãë= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJON

cáåÇ= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJON

TABLE OF CONTENTS

q~ÄäÉ=çÑ=`çåíÉåíë

áî `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

CHAPTER 3 ON-SITE PREPARATION

^oofs^i=^q=fkpq^ii=pfqb= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==PJN

CHAPTER 4 GAS METER EXCHANGE

jbqbo=bu`e^kdb=mol`bpp=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJN

^êêáîáåÖ=~í=íÜÉ=içÅ~íáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJN

sÉêáÑóáåÖ=íÜÉ=jÉíÉê=páíÉ==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJN

`çåÑáêãáåÖ=mêçéÉê=fåëí~ää~íáçå=`çåÇáíáçåë= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJO

pÜìííáåÖ=lÑÑ=íÜÉ=pÉêîáÅÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJO

fåëí~ääáåÖ=íÜÉ=kÉï=jÉíÉê= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJP

oÉëíçêáåÖ=pÉêîáÅÉI=mìêÖáåÖ=íÜÉ=^áêI=~åÇ=mÉêÑçêãáåÖ=íÜÉ=iÉ~â=qÉëíK= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJP

oÉäáÖÜíáåÖ=^ää=^éé~ê~íìëÉë=~åÇ=`çåÑáêãáåÖ=qÜÉáê=léÉê~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

mêçÖê~ããáåÖ=íÜÉ=jçÇìäÉ==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

mÉêÑçêãáåÖ=a~í~=`çääÉÅíáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

`äÉ~åáåÖ=ré=íÜÉ=tçêâ=^êÉ~= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

bñáíáåÖ=íÜÉ=mêÉãáëÉ==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

jlarib=obqolcfq=Efkabu=lo=obdfpqboF=obmi^`bjbkq=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

`rpqljbo=phfm=lo=`^k`bii^qflk= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJQ

fÑ=qÜÉêÉ=fë=a~ã~ÖÉ=lå=páíÉ=tÜÉå=vçì=^êêáîÉ= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==QJR

CHAPTER 5 RESIDENTIAL METER MODULE RETROFIT

ql=_bdfk=obpfabkqf^i=jbqbo=jlarib=obqolcfq= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJN

^ãÉêáÅ~å=fåëí~ää~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJO

oçÅâïÉääLbèìáãÉíÉêLpÉåëìë=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJU

péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáë=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJNQ

i~åÅ~ëíÉêLk~íáçå~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOM

CHAPTER 6 COMMERCIAL AND INDUSTRIAL METER MODULE INSTALLATION

ql=_bdfk=`Cf=jbqbo=jlarib=fkpq^ii^qflk= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJN

^ãÉêáÅ~å=`dP=fåëí~ää~íáçå= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJO

oçÅâïÉääLbèìáãÉíÉêLpÉåëìë=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJV

péê~ÖìÉL^Åí~êáë=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNO

pÅÜäìãÄÉêÖÉêL^Åí~êáë=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNS

CHAPTER 7 CELLNET PULSE RECORDER METER MODULE INSTALLATION

qllip=^ka=bnrfmjbkq= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJN

bèìáéãÉåí= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJN

qççäë= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJP

p^cbqv=^ka=bksfolkjbkq=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJQ

mêÉêÉèìáëáíÉ=qê~áåáåÖ= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJQ

mêÉäáãáå~êó=`ÜÉÅâë==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJQ

páíÉ=oÉèìáêÉãÉåíë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJQ

c``=fkcloj^qflk= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJR

fkpq^iifkd=qeb=`biikbq=mripb=ob`loabo= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJR

jçìåíáåÖ=íÜÉ=`mo=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJR

fÇÉåíáÑóáåÖ=íÜÉ=oÉÖáëíÉê=Ñçê=fåëí~ää~íáçå==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJR

`çååÉÅíáåÖ=íÜÉ=mob`l=pïáíÅÜ=íç=íÜÉ=`mo= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJR

mêçÖê~ããáåÖ=`mo=båÇéçáåí=Ñçê=léÉê~íáçå=ïáíÜ=mob`l=pïáíÅÜ= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJT

qbpqfkd=qeb=bkamlfkq==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJU

bkamlfkq=obmi^`bjbkq==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJV

qolr_ibpellqfkd==K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJV

oc=_ìëíÉê=açÉë=kçí=_ÉÉé=tÜÉå=qÉëíáåÖ= K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJV

`ìëíçãÉê=pìééçêí= =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJV

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ îáá

Figure Figure Titles Page

NKN oc=_ìëíÉê=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJP

NKO e~åÇÜÉäÇë=ïáíÜ=éêçÖê~ããáåÖ=Å~ÄäÉë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =NJQ

OKN a^m=m`RPOM_=e~åÇ=eÉäÇ=m`=~åÇ=ibjl=Å~ääçìí =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJN

OKO `b=aáëéä~ó =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO

OKP a^m=hÉóé~Ç K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJO

OKQ e~åÇÜÉäÇ=ã~áå=ëÅêÉÉå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJR

OKR e~åÇÜÉäÇ=^ÇÇêÉëë=ïáíÜ=ëéÉÅá~ä=áåëíêìÅíáçåëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJS

OKS e~åÇÜÉäÇ=ëéÉÅá~ä=áåëíêìÅíáçåë=ëÅêÉÉå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJT

OKT e~åÇÜÉäÇ=ríáäáíó=cáÉäÇ=a~í~=ëÅêÉÉå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJU

OKU e~åÇÜÉäÇ=aá~ä=êÉ~Ç=Éåíêó=ëÅêÉÉå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJV

OKV e~åÇÜÉäÇ=åìãÄÉê=çÑ=Çá~äë=ëÉäÉÅíáçå=ëÅêÉÉå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNM

OKNM e~åÇÜÉäÇ=pí~êí=ÅçìåíáåÖ=Çá~äë=çå=íÜÉ=êáÖÜíK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==OJNM

OKNN e~åÇÜÉäÇ=Çá~ä=êÉ~Ç=Éåíêó=ëÅêÉÉå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNN

OKNO e~åÇÜÉäÇ=fåáíá~ä=éêçÖê~ããáåÖ=ëÅêÉÉåK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNO

OKNP e~åÇÜÉäÇ=Éå~ÄäÉ=í~ãéÉê=ÑÉ~íìêÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNP

OKNQ e~åÇÜÉäÇ=fåëí~ää=ÅçãéäÉíÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNP

OKNR e~åÇÜÉäÇ=êÉÇáëéä~óë=áåÑçêã~íáçå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNQ

OKNS e~åÇÜÉäÇ=oÉ~Ç=çìí=çÑ=o~åÖÉ=ëÅêÉÉåK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNR

OKNT e~åÇÜÉäÇ=oÉJÉåíÉê=ãÉíÉê=êÉ~Ç =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNS

OKNU jÉíÉê=~äêÉ~Çó=ìëÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNT

OKNV e~åÇÜÉäÇ=jÉíÉê=fa=`Ü~åÖÉ=ëÅêÉÉå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==OJNT

OKOM léíáçåë=çå=~ÇÇêÉëë=ëÅêÉÉå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNU

OKON e~åÇÜÉäÇ=pâáé=ëÅêÉÉå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJNU

OKOO e~åÇÜÉäÇ=pâáé=`çåÑáêã~íáçå=ëÅêÉÉå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==OJNV

OKOP e~åÇÜÉäÇ=cáåÇ=pÅêÉÉåK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJON

OKOQ e~åÇÜÉäÇ=p~ãéäÉ=ëÉ~êÅÜ=äáëí K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =OJOO

RKN ^ãÉêáÅ~åW=jÉíÉê=jçÇìäÉ=ÄÉÑçêÉ=áåëí~ää~íáçå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJO

RKO ^ãÉêáÅ~åW=ãÉíÉê=ïáíÜ=áåÇÉñ=~åÇ=áåÇÉñ=ÅçîÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJO

RKP ^ãÉêáÅ~å=oÉãçîáåÖ=íÜÉ=fåÇÉñ=EçåÉ=ëÅêÉï=çå=É~ÅÜ=ëáÇÉF K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJP

RKQ ^ãÉêáÅ~åW=päáÇáåÖ=íÜÉ=fåÇÉñ=~íí~ÅÜãÉåí=Åäáé=çìí=EçåÉ=éÉê=ëáÇÉF =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJP

RKR ^ãÉêáÅ~åW=^äáÖåáåÖ=íÜÉ=ÇêáîÉ=ÇçÖ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJQ

RKS ^ãÉêáÅ~åW=^íí~ÅÜáåÖ=íÜÉ=jÉíÉê=jçÇìäÉ=çåíç=íÜÉ=ãÉíÉê=Äó=ëÅêÉïáåÖ=áå=íïç=ëí~åÇJçÑÑ=Ñ~ëíÉåÉêë =K=K= =RJQ

RKT ^ãÉêáÅ~åW=fåëí~ääáåÖ=fåÇÉñ=çå=ëí~åÇçÑÑ=ëÅêÉïë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJR

RKU ^ãÉêáÅ~åW=päáÇáåÖ=íÜÉ=fåÇÉñ=Åäáé=áå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJR

RKV ^ãÉêáÅ~åW=`çååÉÅíáåÖ=íÜÉ=Ä~ííÉêó K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJS

RKNM ^ãÉêáÅ~åW=fåëí~ääáåÖ=íÜÉ=Ä~ííÉêó=ïáíÜ=íÜÉ=Ä~ííÉêó=Å~ÄäÉ=çå=íçé =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJS

RKNN ^ãÉêáÅ~åW=mêçéÉêäó=áåëí~ääÉÇ=Ä~ííÉêóK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJS

RKNO ^ãÉêáÅ~åW=jÉíÉê=ãçÇìäÉ=ïáíÜ=ÅçîÉê=~åÇ=í~ãéÉê=ëÉ~äë=áåëí~ääÉÇ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJT

RKNP oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=ãÉíÉê=ãçÇìäÉ=ÄÉÑçêÉ=áåëí~ää~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJU

RKNQ oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=ãÉíÉêK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJU

RKNR oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=jÉíÉê=ïáíÜ=í~ãéÉê=ëÉ~äë=~åÇ=áåÇÉñ=ÅçîÉê=êÉãçîÉÇ =K=K=K=K=K=K=K=K=K=K=K=K= =RJU

RKNS oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=oÉãçî~ä=çÑ=áåÇÉñ=ÅçîÉê=Ö~ëâÉí =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJV

RKNT oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=jÉíÉê=jçÇìäÉ=~åÇ=áåÇÉñ=ïáíÜ=ëÅêÉïë=áå=éä~ÅÉ=êÉ~Çó=Ñçê=~ëëÉãÄäó=K= =RJV

RKNU oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=^íí~ÅÜáåÖ=íÜÉ=jÉíÉê=jçÇìäÉ=~åÇ=áåÇÉñ=íç=íÜÉ=ãÉíÉêK=K=K=K=K=K=K=K=K=K=K= =RJNM

RKNV oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=`çååÉÅíáåÖ=íÜÉ=Ä~ííÉêó =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNN

RKOM oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=`çêêÉÅí=Ä~ííÉêó=çêáÉåí~íáçå=EÅçååÉÅíçê=çå=íçéF=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNN

RKON oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=_~ííÉêó=éêçéÉêäó=áåëí~ääÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNN

RKOO oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=fåëí~ääáåÖ=íÜÉ=jÉíÉê=jçÇìäÉ=ÅçîÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNO

RKOP oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=íïçJëÅêÉï=ÅçåÑáÖìê~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNO

RKOQ oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=`çêêÉÅíäó=áåëí~ääÉÇ=jÉíÉê=jçÇìäÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNP

RKOR péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=jÉíÉê=jçÇìäÉ=ÄÉÑçêÉ=áåëí~ää~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNQ

RKOS péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=jÉíÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNQ

RKOT péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=oÉãçîáåÖ=íÜÉ=áåÇÉñ=ÅçîÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNQ

RKOU péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=oÉãçîáåÖ=íÜÉ=áåÇÉñK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNR

RKOV péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=oÉãçî~ä=çÑ=áåÇÉñ=ÅçîÉê=Ö~ëâÉí=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNR

RKPM péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=jÉíÉê=jçÇìäÉ=éêÉJ~ëëÉãÄäÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNS

RKPN péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=^äáÖåãÉåí=çÑ=íÜÉ=ãÉíÉê=ÇêáîÉ=ÇçÖ=~åÇ=ëÅêÉïë =K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNS

RKPO péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=jÉíÉê=jçÇìäÉ=Ä~ëÉ=~íí~ÅÜÉÇ=íç=ãÉíÉêI=êÉ~Çó=íç=ëäáÇÉ=çå=Çá~äë=K= =RJNS

RKPP péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=pÉÅìêáåÖ=áåÇÉñ=~åÇ=ÅÜÉÅâáåÖ=Ñçê=ÑêÉÉ=ãçîÉãÉåí=çÑ=ïáÖÖäÉêJ =K=K= =RJNT

RKPQ péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=`çååÉÅíáåÖ=íÜÉ=_~ííÉêó=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNU

RKPR péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=`çêêÉÅí=_~ííÉêó=lêáÉåí~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNU

RKPS péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=_~ííÉêó=`çêêÉÅíäó=fåëí~ääÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =RJNU

RKPT péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáëW=c~ëíÉå=`çîÉê=pÅêÉïë=~åÇ=fåëÉêí=q~ãéÉê=ëÉ~äë =K=K=K=K=K=K=K=K=K=K=K=K= =RJNV

LIST OF FIGURES

îááá `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure Figure Titles Page

RKPU i~åÅ~ëíÉêLk~íáçå~äW=jÉíÉê=êÉíêçÑáíí~ÄäÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOM

RKPV i~åÅ~ëíÉêLk~íáçå~äW=jÉíÉê=åçåJêÉíêçÑáíí~ÄäÉ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOM

RKQM i~åÅ~ëíÉêLk~íáçå~äW=jÉíÉê=jçÇìäÉ=ÄÉÑçêÉ=áåëí~ää~íáçå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJON

RKQN i~åÅ~ëíÉêLk~íáçå~äW=jÉíÉê=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJON

RKQO i~åÅ~ëíÉêLk~íáçå~äW=oÉãçîáåÖ=íÜÉ=áåÇÉñ=ÅçîÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJON

RKQP i~åÅ~ëíÉêLk~íáçå~äW=oÉãçîáåÖ=íÜÉ=áåÇÉñ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOO

RKQQ i~åÅ~ëíÉêLk~íáçå~äW=oÉãçî~ä=çÑ=áåÇÉñ=ÅçîÉê=Ö~ëâÉí K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOO

RKQR i~åÅ~ëíÉêLk~íáçå~äW=fåëí~ää~íáçå=çÑ=kÉï=`çìéäÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOP

RKQS i~åÅ~ëíÉêLk~íáçå~äW=jÉíÉê=jçÇìäÉ=éêÉJ~ëëÉãÄäÉÇ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOP

RKQT i~åÅ~ëíÉêLk~íáçå~äW=^äáÖåãÉåí=çÑ=íÜÉ=ãÉíÉê=ÇêáîÉ=ÇçÖ=~åÇ=ëÅêÉïë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOQ

RKQU i~åÅ~ëíÉêLk~íáçå~äW=jÉíÉê=jçÇìäÉ=Ä~ëÉ=~íí~ÅÜÉÇ=íç=ãÉíÉêI=êÉ~Çó=íç=ëäáÇÉ=çå=Çá~äë K=K=K=K=K=K=K=K=K=K=K==RJOQ

RKQV i~åÅ~ëíÉêLk~íáçå~äW=`çååÉÅíáåÖ=íÜÉ=_~ííÉêó K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOR

RKRM i~åÅ~ëíÉêLk~íáçå~äW=`çêêÉÅí=_~ííÉêó=lêáÉåí~íáçå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOR

RKRN i~åÅ~ëíÉêLk~íáçå~äW=_~ííÉêó=`çêêÉÅíäó=fåëí~ääÉÇ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOS

RKRO i~åÅ~ëíÉêLk~íáçå~äW=c~ëíÉå=`çîÉê=pÅêÉïë=~åÇ=fåëÉêí=q~ãéÉê=ëÉ~äë=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOS

RKRP i~åÅ~ëíÉêLk~íáçå~äW=oÉéä~ÅáåÖ=pÉêá~ä=kìãÄÉê=mä~íÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==RJOT

SKN ^ãÉêáÅ~å=`dPW=jÉíÉê=ÄÉÑçêÉ=áåëí~ää~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJO

SKO ^ãÉêáÅ~å=`dPWoÉãçîáåÖ=íÜÉ=ÅçîÉê=~åÇ=áåÇÉñK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJO

SKP `çããçå=^ãÉêáÅ~å=ãÉíÉê=ãçÇìäÉ=é~Åâ~ÖáåÖ=ïáíÜ=Ü~êÇï~êÉ=çå=íÜÉ=êáÖÜíK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJP

SKQ ^ãÉêáÅ~å=`dPW=ëÅêÉï=âáí K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJP

SKR ^ãÉêáÅ~å=`dPW=ãÉíÉê=ãçÇìäÉ=âáí K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJQ

SKS léÉå=^ãÉêáÅ~å=`dPW=ãçÇìäÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJQ

SKT ^ãÉêáÅ~å=`dPW`çååÉÅíáåÖ=íÜÉ=Ä~ííÉêó=íç=íÜÉ=ãçÇìäÉ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJR

SKU ^ãÉêáÅ~å=`dPW`çååÉÅíáåÖ=íÜÉ=éêçÖê~ããáåÖ=Å~ÄäÉ=íç=íÜÉ=^ãÉêáÅ~å=`çããÉêÅá~ä=ãÉíÉê=ãçÇìäÉ=K==SJR

SKV ^ãÉêáÅ~å=`dPW=ãçÇìäÉ=êçìíÉ=ïáêÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJS

SKNM ^ãÉêáÅ~å=`dPW=ãçÇìäÉ=fåÇÉñ=ÇÉí~áäK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJS

SKNN ^ãÉêáÅ~å=`dPWãçÇìäÉJ=^íí~ÅÜáåÖ=íÜÉ=åÉï=fåÇÉñ=ÅçîÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJT

SKNO ^ãÉêáÅ~å=`dPW=í~ãéÉê=ëÉ~äáåÖ=Ñçê=fåÇÉñ=ÅçîÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJT

SKNP ^ãÉêáÅ~å=`dPWä=áåëí~ääáåÖ=fåÇÉñ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJU

SKNQ ^ãÉêáÅ~å=`dPW=ãçìåíáåÖ=Äê~ÅâÉí=ÅçåÑáÖìê~íáçåë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJU

SKNR ^ãÉêáÅ~å=`dPWãÉíÉê=ãçÇìäÉ=ïáíÜ=ãçìåíáåÖ=Äê~ÅâÉí=áåëí~ääÉÇ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJV

SKNS oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=fåÇÉñÉë=ÄÉÑçêÉ=áåëí~ää~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNM

SKNT oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=ëÅêÉï=~åÇ=ãÉíÉê=ãçÇìäÉ=âáíë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNM

SKNU oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=ãÉíÉê=ãçÇìäÉ=áåëí~ääáåÖ=fåÇÉñ=ÅçîÉê=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNN

SKNV oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=ëÉÅìêáåÖ=áåÇÉñ=ÅçîÉê=C=jÉíÉê=jçÇìäÉK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNN

SKOM oçÅâïÉääLbèìáãÉíÉêLpÉåëìëW=ÅÉåíÉê=íÉëí=Çá~äI=ÅçìåíÉê=áåëí~ääÉÇI=çê=áåÇÉñ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNO

SKON péê~ÖìÉL^Åí~êáëW=fåÇÉñÉë=ÄÉÑçêÉ=áåëí~ää~íáçåK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNO

SKOO péê~ÖìÉL^Åí~êáëW=ëÅêÉï=âáí K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNP

SKOP péê~ÖìÉL^Åí~êáëW=áåëí~ääáåÖ=fåÇÉñ=ÅçîÉêK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNQ

SKOQ péê~ÖìÉL^Åí~êáëW=áåëí~ääÉÇ=í~ãéÉê=ëÉ~äë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNQ

SKOR péê~ÖìÉL^Åí~êáëW=ãÉíÉê=ïáíÜ=ãçÇìäÉ=áåëí~ääÉÇ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNR

SKOS pÅÜäìãÄÉêÖÉêL^Åí~êáëW=ÄÉÑçêÉ=áåëí~ää~íáçå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNS

SKOT pÅÜäìãÄÉêÖÉêL^Åí~êáëW=ãÉíÉê=ïáíÜ=ëÜçêí=Ä~ëÉ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNS

SKOU pÅÜäìãÄÉêÖÉêL^Åí~êáëW=fåÇÉñ=ÅçîÉê=êÉãçîÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNT

SKOV pÅÜäìãÄÉêÖÉêL^Åí~êáëW=ãÉíÉê=ïáíÜ=Äê~ÅâÉí=~åÇ=ãÉíÉê=ãçÇìäÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==SJNU

TKN PJtáêÉ=`~ÄäÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJR

TKO jçäÉñ=`çååÉÅíçê=E~ë=ëÜáééÉÇF K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJS

TKP `mo=mêçÖê~ããáåÖ=`~ÄäÉ=^íí~ÅÜÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJT

TKQ `mo=_~ííÉêó=`çååÉÅíçê=`çååÉÅíÉÇ=íç=`moK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJU

TKR `mo=^Åíáî~íáçå=rëáåÖ=oc=_ìëíÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==TJU

VKN NJt~ó=mêçÖê~ããáåÖ=`~ÄäÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNM

VKO pÜççíÉê=ÄçñK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNM

VKP içÖ=lå=ëÅêÉÉåK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNN

VKQ dmêÉé=jÉåì=_~ê=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNN

VKR `ÜççëÉ=oÉëd~ë=~ë=íÜÉ=ãÉíÉê=íóéÉ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNP

VKS fåÇáÅ~íÉ=íÜÉ=mêçÖê~ã=qóéÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNP

VKT jçÇÉë=íç=ÅÜççëÉ=Ñêçã=~êÉ=“fåëéÉÅíÒ=çê=“mêçÖê~ã=kÉïÒK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNP

VKU dmêÉé=“fåëéÉÅí=jçÇÉÒ=ëÅêÉÉå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNQ

VKV “fåëéÉÅí=jçÇÉÒ=pÅêÉÉå=táíÜ=jçÇìäÉ=mäìÖÖÉÇ=få=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNR

VKNM “fåëéÉÅí=jçÇÉÒ=táíÜ=mçïÉê=i^k=pÅ~ååÉÇ=fåK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNS

VKNN “mêçÖê~ã=kÉïÒ=pÅêÉÉå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNT

VKNO “mêçÖê~ã=kÉïÒ=pÅêÉÉå=ïáíÜ=jçÇìäÉ=mäìÖÖÉÇ=få =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNU

VKNP bêêçê=jÉëë~ÖÉ=aáëéä~óÉÇ=ïÜÉå=qÜÉ=têçåÖ=jÉíÉê=fa=cçêã~í=fë=båíÉêÉÇ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==VJNV

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ áñ

Figure Figure Titles Page

VKNQ bêêçê=jÉëë~ÖÉ=aáëéä~óÉÇ=áÑ=qÜÉ=pÅ~ååÉÇ=mçïÉê=i^k=açÉë=kçí=j~íÅÜ=mêçÖê~ããÉÇ =K=K=K=K=K=K=K=K= =VJNV

VKNR aáëéä~ó=ïÜÉå=é~ê~ãÉíÉêë=~êÉ=îÉêáÑáÉÇ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJOM

VKNS bêêçê=jÉëë~ÖÉ=fåÇáÅ~íáåÖ=íÜ~í=~=jÉíÉê=fa=^äêÉ~Çó=bñáëíë=áå=íÜÉ=mêçÖê~ãäçÖ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJOM

VKNT aìéäáÅ~íÉ=mçïÉê=i^k=^ÇÇêÉëë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJON

VKNU “oÉJmêçÖê~ã=läÇÒ=pÅêÉÉå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJON

VKNV oÉJmêçÖê~ã=läÇ=táíÜ=jçÇìäÉ=mäìÖÖÉÇ=få=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJOO

VKOM bêêçê=jÉëë~ÖÉ=aáëéä~óÉÇ=ïÜÉå=båíÉêÉÇ=oÉ~Ç=áë=íçç=ä~êÖÉ=Ñçê=íÜÉ=oçääçîÉê=mçáåí=K=K=K=K=K=K=K=K=K=K=K=K= =VJOP

VKON jo_=jçÇÉ=j~áå=jÉåì K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJOQ

VKOO jo_=pÅêÉÉå=ïáíÜ=jçÇìäÉ=mäìÖÖÉÇ=få =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =VJOR

VKOP bêêçê=jÉëë~ÖÉ=aáëéä~óÉÇ=ïÜÉå=båíÉêÉÇ=s~äìÉ=açÉë=kçí=j~íÅÜ=mêçÖê~ããÉÇ=s~äìÉ =K=K=K=K=K=K=K=K=K= =VJOS

^KN jÉíÉê=aêáîÉ=açÖ=~äáÖåÉÇ=ïáíÜ=O=ÑíK=ãçÇìäÉ=ïáÖÖäÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==^JN

^KO jÉíÉê=aêáîÉ=açÖ=~äáÖåÉÇ=ïáíÜ=N=ÑíK=ãçÇìäÉ=ïáÖÖäÉê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==^JN

_KN c~ÇáåÖ=^ãÉêáÅ~å=fåÇÉñ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==_JN

_KO jÉí~ä=êáîÉíë=çå=~=péê~ÖìÉ=ÅçîÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==_JN

`KN ^ãÉêáÅ~å=éêçéÉê=éä~ÅÉãÉåí=çÑ=oc=_ìëíÉê=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =`JO

`KO oçÅâïÉääLbèìáãÉíÉêLpÉåëìë=oc=_ìëíÉê=éä~ÅÉãÉåí =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =`JP

`KP péê~ÖìÉLpÅÜäìãÄÉêÖÉêL^Åí~êáë=oc=éä~ÅÉãÉåíK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =`JQ

`KQ `çããÉêÅá~ä=d~ë=oc=éä~ÅÉãÉåíK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =`JR

`KR `çããÉêÅá~ä=d~ë=jçÇìäÉ=ìåÅçîÉêÉÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =`JR

`KS ollqpLoçãÉíë=odP=oc=éä~ÅÉãÉåí K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =`JS

aKN e~åÇÜÉäÇ=~ÑíÉê=açÅâ=Ü~ë=ÄÉÉå=ëÉäÉÅíÉÇ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==aJN

aKO e~åÇÜÉäÇ=a^m=ÅÜ~êÖáåÖ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==aJO

bKN fåÇÉñ=_~ëÉ=mä~íÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =bJN

bKO jÉíÉêë=ïáíÜ=mêÉëëìêÉ=q~Äë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==bJO

bKP mêÉëëìêÉ=^Ç~éíÉê =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =bJO

bKQ jçìåíáåÖ=jçÇìäÉÛë=qê~åëãáííÉê=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==bJP

bKR mä~íÉ=jçìåíÉÇ=_~Åâï~êÇë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =bJQ

bKS máéÉ=`äÉ~ê~åÅÉ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==bJQ

bKT mêçíÉÅíáîÉ=fåÇÉñ=båÅäçëìêÉë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K==bJR

cKN táêÉë=mìëÜÉÇ=áåíç=pÅçíÅÜäçâ=`çååÉÅíçê K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =cJN

cKO pÅçíÅÜiçâ=`çååÉÅíçê=áå=`êáãéáåÖ=qççä=g~ïë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =cJN

cKP `êáãéÉÇ=pÅçíÅÜäçâë=aáëÅÜ~êÖÉ=dÉä K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =cJO

cKQ mä~ÅáåÖ=mä~ëíáÅ=qáÉë=çå=`~ÄäÉëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =cJO

cKR fåëÉêíáåÖ=péäáÅÉ=^ëëÉãÄäó=áåíç=páäáÅçåÉJÑáääÉÇ=péäáÅÉ=båÅäçëìêÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= =cJP

ñ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure Figure Titles Page

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ ñá

LIST OF TABLES

Table Table Titles Page

mKN aÉëÅêáéíáçå=çÑ=`Ü~éíÉêëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=KmJO

mKO oÉä~íÉÇ=mìÄäáÅ~íáçå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=KmJR

OKN e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=`ÜÉÅâ=oçìíÉ=pí~íìë =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJR

OKO e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=oçìíÉ=pí~íìë=ëÅêÉÉå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJT

OKP e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=péÉÅá~ä=fåëíêìÅíáçåë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJT

OKQ e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=jÉíÉê=oÉ~ÇáåÖ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJV

OKR e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=kìãÄÉê=çÑ=aá~äë=ëÉäÉÅíáçå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNM

OKS e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=jÉíÉê=oÉ~ÇáåÖ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNN

OKT e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=fåáíá~ä=éêçÖê~ããáåÖ=ëÅêÉÉå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNO

OKU e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=mêçÖê~ããáåÖ=íÜÉ=jÉíÉê=jçÇìäÉ =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNQ

OKV e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=oÉ~Ç=lìí=çÑ=o~åÖÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNS

OKNM e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=oÉ~Ç=lìí=çÑ=o~åÖÉ K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNS

OKNN e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=jÉíÉê=^äêÉ~Çó=rëÉÇK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNT

OKNO e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=pâáéëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNV

OKNP e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=pâáé=`çåÑáêã~íáçå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJNV

OKNQ e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=oçìíÉ=pí~íìë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJON

OKNR e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=cáåÇK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJOO

OKNS e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=ë~ãéäÉ=ëÉ~êÅÜ=äáëí=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJOP

OKNT e~åÇÜÉäÇ=léíáçåë=~åÇ=^ÅíáîÉ=hÉóë=Ñçê=ë~ãéäÉ=ëÉ~êÅÜ=êÉÅçêÇ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OJOP

TKN bèìáéãÉåí =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K TJN

TKO qççäë K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K TJP

TKP táêÉ=`çäçê=j~íÅÜáåÖ=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K TJT

LIST OF TABLES

iáëí=çÑ=q~ÄäÉë

ñáá `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Table Table Titles Page

mêÉÑ~ÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ mJP

TYPOGRAPHICAL CONVENTIONS

Thissectiondescribestheconventionsusedinthisguidetomakefindingand

understandinginformationeasier.Thefollowingkindsofformattinginthetext

identifyspecialinformation.

Convention Description

Allbold,initialcapital

letters

Referstofieldnames,buttons,menus,menu

options,andkeys.Examples:Devicefield,Open

button,Filemenu,orCtrlkey.

Allboldlower‐caseletters Referstotheexactkeystrokesyouenter.Whatyou

typeisalwaysshowninlowercaseletters.

Example:TypelocalintheDevicefield.

Italicizedlower‐caseword

betweenless‐thansign(<)

andgreater‐thansign(>)

Referstovariablesthatoccurinitemnames.

Example:AddSubNetworkTo<networkname>

dialog,where<networkname>referstothenameof

anetwork.

<menu>|<option>|

<option>...

Referstothesequenceofchoicesyoushouldmake

toaccessaspecificdialogormenuoption.

Examples:chooseStart|Settings|ControlPanel

orchooseFile|Open.

Plussign(+)betweenkeys Referstopressingthekeysatthesametime.

Example:Alt+B.

Comma(,)betweenkeys Referstokeyswhicharepressedsequentially.

Example:Alt,F.

Note boxes provide essential information about Cellnet Gas Meter Module and Meter

Installation.

Cautions provide information that you must read to avoid making relatively moderate errors

during Cellnet Gas Meter Module and Meter Installation.

Warnings provide special, must-read information. If you ignore a warning, you may

create a safety hazard, omit essential data or make a critical error. Warnings are in

the same format as notes, except they are shown in bold text.

mêÉÑ~ÅÉ

mJQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

CONTACTING TECHNICAL SUPPORT

Cellnettechnicalsupportisavailablebytelephoneoremail.Whenyoucontact

technicalsupport,bepreparedtogiveexactdescriptionsof:

•Theproblemyouencountered

•Whathappenedandwhatyouweredoingwhentheproblemoccurred

•Howyoutriedtosolvetheproblem

•Theexacttextofanyerrormessages

Telephone Access

TechnicalsupportisavailableMondaythroughFridayfrom8:00a.m.to5:00p.m.

(EST)bycalling800‐791‐2567.Ifallsupporttechniciansarehelpingother

customers,yourcallwillberoutedtotheCellnetSupportvoicemailsystem.

Leaveabriefmessagethatincludesthefollowinginformation:

•Yourname

•Yourcompany’sname

•Yo

urtelephonenumber

Asupporttechnicianwillreturnyourcallassoonaspossiblewithinnormal

businesshours.Techniciansreturnallcallsintheorderthattheyarereceived.

Email Access

Ifyouprefer,youmayemailadescriptionofyourproblemto:

customersupport@cellnet.com

Asupporttechnicianwillreturnyouremailassoonaspossiblewithinnormal

businesshours.Techniciansreturnallemailsintheorderthattheyarereceived.

Ordering Publications

Youcanorderpublicationsfromyoursalesrepresentative.Toorderadditional

copiesofthismanual,useordernumber:

CO‐0089‐GB‐07.07

Publication Comments

Cellnetwelcomesyourfeedbackandcomments.Ifyouhavecommentsor

suggestionsforimprovingthispublication,aformforreader’scommentsis

providedatthebackofthismanual.Ifyouwouldlikeareply,includeyour

contactinformation:

•Name

• Telephonenumberorfaxnumber

•Emailaddress

• Companynameandaddress

Besuretoincludethefollowinginformationalongwithyourcomment:

• Titleandnumberofthismanual

• Pagenumberortopicrelatedtoyourcomment

mêÉÑ~ÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ mJR

RELATED PUBLICATIONS

Thefollowingdocumentsprovideimportantrelatedinformation.

Table P.2 Related Publication

Document Description

NJt~ó=jçÇìäÉ=

mêçÖê~ããáåÖ=`~ÄäÉ

mêçÖê~ããáåÖ=íÜÉ=ãçÇìäÉ=îá~=~=m`=çê=ä~éíçé=~åÇ=íÜÉ=

NJï~ó=Å~ÄäÉ

ríáäákÉí=NJt~ó=mìäëÉ=

oÉÅçêÇÉê

Ñçê=t~íÉê=^ééäáÅ~íáçåë

eçï=íç=ÅçêêÉÅíäó=áåëí~ää=~å=ríáäákÉí=NJt~ó=mìäëÉ=

oÉÅçêÇÉê=EÜÉêÉ=~ÑíÉê=êÉÑÉêêÉÇ=íç=~ë=`mo=çê=`ÉääåÉí=

mìäëÉ=oÉÅçêÇÉêFK=fí=ÅçîÉêë=ÉåÇéçáåí=áåëí~ää~íáçåI=éìäëÉ=

êÉÖáëíÉê=éêçÖê~ããáåÖI=~åÇ=íêçìÄäÉëÜççíáåÖK

mêÉÑ~ÅÉ

mJS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ NJN

CHAPTER 1 PRE-INSTALLATION

Properplanningandthoroughpreparationarecriticalforsuccessfulinstallation.

Thischapteroutlinesbasicrequirementsforthepre‐installationphase.

SAFETY OVERVIEW

Priortostartingtheinstallationprocess,youmustdevelopandlaunchaninstaller

safetytrainingplanforinitial,refresherandongoingsafetytraining.Ensurethat

installersreceiveappropriateinitialandrefreshertrainingtomeettheirspecific

safety‐relatedresponsibilities.Youmustprovidesafetytrainingwhen:

•Anexistinginstallerassumesnewdutiesforwhichheorshehasnot

previouslyreceivedtraining.

•Newprocessesandmethodologiesrepresentingnewrisksareintroduced

intotheinstallationenvironment.

•Previouslyunidentifiedrisksarereported.

Theinstallationsupervisoryteamassumesresponsibilityforensuringthat

installersareproperlytrained,authorized,andcontinuallyqualifiedtoperform

theirwork.Theteammustalsotakeresponsibilityforthesafetyoftheirinstallers

andtoassuresafeworkmethodologies.Installersmustunderstandthattheir

supervisor’sresponsibilitydoesnotrelievethemfromtheirindividual

responsibilitytoperformtheworksafelyandtofollowallsafetyrulesand

proceduresapplicabletotheirwork.

mêÉJfåëí~ää~íáçå

NJO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

GAS METER INSTALLATION AND MODULE RETROFIT TOOL LIST

•TorquescrewdriverwithvariousslotandPhilliptips

•5‐in‐1screwdriver

•14ʺPipewrench(2)

•18ʺPipewrench(2)

•24ʺPipewrench(1)

•14ʺChannellocks14ʺcurvejaws

•#1and#2Phillipsscrewdriver

•Screwdriver‐1/8‐inchslotblade

• HammerBallPeen

• Shovelandspade

•Crescentwrench

•WD‐40

•ThreadLubricant

• Identification

• DoorHangers

•ClipBoards

•Pe

ns/Pencils

•Safetycones

• Screwdriver‐½”slotbladex10ʺ

•Awl,Heavyduty

•Headlightflashlight

•Brassscraper1¼‐inchwide

• Diagonalcutters

•Handheld

• PersonalProtectiveEquipment

•Clipboard

• StreetAtlas

•RFBuster,P/N26‐1050

•Non‐sparkflashlight

•Cellphoneor2‐waycommunicationdevice

•WireBrush

• Dresser/RootsSwitchtester(forCPRinstalls)

•Cableties

•T‐10/T‐15Securitytorxdriver(necessaryforinstallingtheCPR)

•Jumpercables

•Leakdetectionsoap

•Pressuregages

•Greyspraypaintandpaintboard(topreventoverspraying)

•Deadblowhammer

mêÉJfåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ NJP

•Anyrequiredspecialtytools

RF BUSTERS

VerifythattheRFBusterisworkingcorrectly.Pressandholdthepushbutton

Switch.TheLEDlightsred,andtheinternalspeakersoundsforapproximately1/

2second.IfnothinghappensortheLEDlightsandspeakersoundcontinuously,

thenthe9Vbatteryisprobablylowandneedstobereplaced.

Figure 1.1 RF Buster

SeeAppendix C,UsingtheRFBusterfordetailedinstructionsonhowtousethe

RFBuster.

Your supervisor carries shovels, spades, saws all, hack saws, oversized tools, large

ladders Please be careful to check the work area each time you change locations to be

certain there are no tools left behind.

mêÉJfåëí~ää~íáçå

NJQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Handhelds (Handheld)

Handheldsarerugged,butyoushouldstillalwayshandlethemcarefully.Ifthe

unitfailstooperateinthefield,useyourNextelphonetopageyourSupervisor

forhelp.Ifpossible,theSupervisorwillassistincorrectingtheproblemorbringa

replacementunitouttoyou.

Figure 1.2 Handhelds with programming cables

Handheldsdifferbyprogram,buttheonesshownabovearecurrentlyinservice.

OntheleftistheDAPPC9800,aDOS‐basedHandheld.InthemiddleistheDAP

CE5320,aWindowsCE‐basedHandheld.OntherightistheDAPCE5320b,a

WindowsCE‐basedHandheld.

Install Material

TheGasMeterExchangeprocessconsistsofusingpredeterminedroute

informationthatidentifiesthemetersthatneedtoberetrofittedwiththeCellnet

GasMeterModuleandmethodsforrecordingdatatodocumenttheinstallation.

Therouteinformationdescribingtheaccountaddress,existingmeterID,

estimatedmeterreads,andanyspecialinstructionsthatdescribecircumstances

uniquetothatparticularaccountwillresideintheinstallersHandheld.

FromtheCrossDock,obtainHandheldandMeterModulestoinstall.The

HandheldwillbepreloadedbytheCrossDockwithallofthedataforthe

assignedroutes.Thepre‐loadeddataincludestheroute,address,meterID,and

estimatedreadfortheparticularmeters,plusspecificinstructionsandrequired

fieldcollectsinformation.

Eachinstallermustvalidatethatthehandheldisproperlyloadedwiththecorrect

routeinformationbeforeleavingtheCrossDock.

METER COMPATIBILITY

CellnetʹsModulefamilyiscompatiblewithspecificbrandsandmodelsofgas

meters.PleaseseethelatestlistinthedocumentGasCompatibilityList,availableat

www.cellnet.com.

mêÉJfåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ NJR

COMPLIANCE

ThisapparatusissuitableforClassI,Division2,GroupDHazardousLocations.

Warning - Explosion Hazard - Substitution of components may impair suitability for

Class I, Division 2.

Danger - Risque d'Explosion - Le remplacement des composants peut affecter la

conformité à la Classe I, Division 2.

mêÉJfåëí~ää~íáçå

NJS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJN

CHAPTER 2 USING THE HANDHELD DEVICE

TheDAP5320bisaportableandrechargeableHandHeldcomputerunit.Its

electriccomponentsareprotectedinhardplastichousing.

ThefeaturesoftheDAP5320binclude

•Windows‐CE‐basedcolorLCDdisplay

• Alphanumerickeypad

•Integratedbarcodescanner

•7‐pinLEMOisusedforchargingtheHandHeldoruploading/downloading

fromRIMS

•Automaticshutofftomaximizebatterylife

•H

andstrapforsecurehandling.

TheHandheldPC(the“Handheld”)communicateswithadesktoporlaptop

computerthroughacommunicationscradleanda7‐pinLEMOcharging/

communicationscable.Itisconfiguredtoreceiveandtransmitinstallationand

manualmeterreaddatatoandfromtheRIMSandOCDBdatabases.The

communicationscradleandcablearealsousedforrecharging(approximately2.5

hoursneededforfullcharge).

Figure 2.1 DAP PC5320B Hand Held PC and LEMO callout

Manufacturer Documentation

Formoredetail,visittheDAPwebsiteathttps://www.daptech.com/docudap/.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Display

TheDAPHandheldusesaTFTliquidcrystaldisplay(LCD).

Figure 2.2 CE Display

High‐contrastcharactersareeasilyvisibleinnormallight.Instructionsforeach

screendisplayatthetopofeachscreeninblinkingredletters.TheHandheld

displaysatabbedviewwhereyouadvanceonescreenatatime.Youcangoback

asmanyscreensasyouwant.

Keyboard

Thekeysonthekeyboardarelabeledwithprimaryfunctions(suchas:PWR(I/O),

ESC,SP,BKSP),the26‐characteralphabet,0‐9numbers,andvarioussymbols.

Enterdatabypressingtheappropriatekey.Enterotherfunctionsbypressingthe

FUNC(blue)keyfirst,thenpressingthecorrespondingalphanumerickeys.

Figure 2.3 DAP Keypad

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJP

1SCANButton:smallyellowF3key;initiatesscanofbarcode

2PWRkey(I/O):F1powerkey;turnsunitonandFUNCthenF1turnstheunit

off

3 ArrowCursorPadkey:changesselection,tabsup,down,leftorright

4BKSP:eraseslastcharacterenteredduringtextentry

5SP:addsspacetotextentry

NTER:entersfunction;savesentryandexitsfunction

7ESC:displayspreviousscreen

8FUNC+Key:bluecoloredfunctionkeyincombinationwithotherkeys

allowstheusertoenternon‐alphacharacters,adjustthecontrast,turnonthe

backgroundlight,etc.

EntryKeys:alphanumericcharacters(A‐Z,0‐9)

CTRL/ALT:notused

9Tabkey:changesselection

10 F2:Displayscurrentbatterylife

Program Conventions

•Keysareactiveforthedisplayedfunction.Forexample,iftextisrequired,the

alphanumerickeysareactive;ifadisplayoptionistobeselected,theArrow

CursorPadmaybeusedasatabkey.Ifthereisalistordrop‐downtype

menu,therewillbesmallarrowsonthescreenindicatingthattheArrow

CursorPadshouldbeusedfortheselection.

•Mostdisplayoptionscanbeselectedbypressingthehotkey(key

correspondingtothefirstcapitalletterintheoption).Forexample,Nisthe

hotkeytoselectiNfointheaddressscreen.Pressingthehotkeyisequivalent

totabbingtothatitemandpressing“enter”.

•Ahotkeythatisnotindicatedintheon‐screentextandisavailableonthe

“Functions”menuscreenis:T‐thistakesyoutotheDate/Timemenu.

•Thefollowingkeysareavailableatmostscreens:

ARROWCURSORPADAdvancestothenextoption

ENTERSelectsandentersthehighlightedoption

ESCExitscurrentfunctionandreturnstopreviousfunction

TABKEYadvancestothenextoption

•Otherprogramconventionsspecifictoaparticularfunctionaredescribedin

theappropriatesection.

You can shut off the Handheld PC during installation with the automatic shutoff feature or

by pressing FUNC + F1 key. The unit retains existing data and remembers the last step

performed when it is turned on again.

Automatic shutoff is a sleep function. The unit shuts off after 3 minutes of inactivity. To

turn on the Handheld PC after automatic shutoff, press the F1 key.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

USING THE DAP HANDHELD

ThissectiongoesthroughtheprocessofusingaDAPHandheldforthe

installationofaCellnetreadymeteratacustomeraccount.

Getting Started with the Handheld

Atypicalgasmeterinstallationrouteconsistsofthefollowingbasicsteps:

1Checkoutmeterswithmodulesalreadyinstalledandmetermodulesfor

retrofit.PickupHandheldPCandlabels.Priortometercheckout,the

HandHeldPCisprogrammedforanassignedinstallerandaninstallation

route(accountaddress,currentmeterID,meterlocation,etc.).

2Checkroute.ReviewinstallerIDroutestatus:numberofinstallationsper

routeID,installationscompletedorskipped.

3Checkaccountaddress.Verifyaddressandanyspecialcustomerinformation

uponarrivalatthecustomersite.

4CheckMeterID.VerifythatthemeterIDmatchestheoneintheHandheld.

5En

termeterread.Entermeterreadingfromexistingmeter.

6ScanmeterID.ScanmeterIDfromthechangeoutmeterlabels.

7Installchangeoutmeter.Labelexistingmeterwithachangeoutlabel.Remove

existingmeterandreplacewithchangeoutmeter.

8 Repeatsteps3to7foreachaddress.

9Checkinreplacedmeters.ReturnthemtotheCross‐Dockanddockthe

HandheldPC.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJR

STANDARD METER INSTALLATION AND/OR MODULE RETROFIT

ThissectioncoverstheinstallerstepsandHandheldscreensforthemeter

exchangeprocessorgasmoduleretrofit.

Check Route Status

1StarttheHandheldPCbypressingF1(I/O)button.Thescreenbelow

displays.Ifthisscreendoesnotdisplay,pressEnterorESCkeystogettothe

CustomerAddressscreen.

Figure 2.4 Handheld main screen

Initialbootscreendisplaysthefirstworkorder’sinformation:

•HandheldID

•Installername

•InstallerID

•Batteryinformation

•Totalroutestatistics

• Currentroutenumber

Table2.1HandheldOptionsandActiveKeysforCheckRouteStatus

Option or Active Key Function

^Äçìí aáëéä~óë=áåÑçêã~íáçå=~Äçìí=íÜÉ=ãÉíÉê=áåëí~ää=ëçÑíï~êÉ=

áåÅäìÇáåÖ=îÉêëáçåI=ÅçéóêáÖÜíI=~åÇ=ãçÇìäÉë=áåëí~ääÉÇ

açÅâ båÇë=áåëí~ää~íáçå=éêçÅÉëëX=~ää=áåëí~ää~íáçåë=~êÉ=ÅÜÉÅâÉÇK=fÑ=

ëçãÉ=áåëí~ää~íáçåë=~êÉ=åçí=ÅçãéäÉíÉÇI=~=ãÉëë~ÖÉ=~ééÉ~êë=

íç=îÉêáÑó=íÜ~í=óçì=ï~åí=íç=ÇçÅâK

Find ^ääçïë=íÜÉ=áåëí~ääÉê=íç=ëÉ~êÅÜ=Ñçê=~=é~êíáÅìä~ê=~ÅÅçìåí=Äó=

~ÇÇêÉëëI=ãÉíÉê=faI=ÅìëíçãÉê=å~ãÉI=çê=~ÅÅçìåí=åìãÄÉêK

kÉñí pÉäÉÅíë=íÜÉ=åÉñí=çéíáçå

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

2PressENTERtodisplayfirstaddressfordisplayedroute.

Check Address

Theaddressscreenshowstheaccount’saddressandanyotherinformation

pertinenttotheinstallationprocess.Iftherearespecialinstructionsforthe

account,thescreendisplaysaninstructionsprompt;otherwise,astandard

addressscreendisplays.

Figure 2.5 Handheld Address with special instructions

TheCustomerscreendisplays:

• Addressinformation

•Sequencenumberinlistofmeters(#1isfirstmetertobeinstalled)

•Metertype(forexample,gasmeter)

•Meterlocation(LxxorLxxx,wherexxorxxxistheutility‐specificlocation

code(forexampleL01)

•Readinstructioncode(R1xx,wherexxistheutility‐specificread)instruction

code(forexampleRI00)

•MeterIDstatusofthisrecord(ToDo,Skipped,orCompleted)

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=íÜÉ=åÉñí=çéíáçå

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` bñáíë=íÜÉ=~ééäáÅ~íáçåK

Table2.1HandheldOptionsandActiveKeysforCheckRouteStatus

Option or Active Key Function

The Handheld PC can be shut off during installation by the automatic shutoff feature or by

the installer pressing the FUNC and then I/O key. The unit retains existing data and remains

at the last step performed until it is turned on again

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJT

1PressENTERtoviewinstructions.

Figure 2.6 Handheld special instructions screen

Specialinstructionsmayinclude:

•Meterlocation

•Customer’smedicalcondition

• Hazardoussituation(guarddog).

Table2.2HandheldOptionsandActiveKeysforRouteStatusscreen

Option or Active Key Function

fåëíêìÅíáçåë aáëéä~óë=íÉñí=áåÑçêã~íáçå=~Äçìí=íÜÉ=~ÅÅçìåí=E_~Ç=ÇçÖI=

oáåÖ=ÇççêÄÉääI=ÉíÅKF

pâáé pâáéë=íÜÉ=ÅìêêÉåí=ïçêâ=çêÇÉê

`Ü~åÖÉ léÉåë=íÜÉ=`Ü~åÖÉ=ëÅêÉÉå=íç=ìéÇ~íÉ=ÇÉí~áäë=~Äçìí=íÜÉ=

~ÅÅçìåí

mêçÄ léÉåë=íÜÉ=mêçÄäÉã=ëÅêÉÉå=ïáíÜ=~=äáëí=çÑ=ìé=íç=Q=éêçÄäÉãë

bp` oÉíìêåë=íç=íÜÉ=mêÉîáçìë=ëÅêÉÉå

båíÉê p~îÉë=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉå

If the address or instructions exceed the length of the window, vertical scroll bars display.

Arrow Cursor Pad moves the display up or down.

Table2.3HandheldOptionsandActiveKeysforSpecialInstructions

Option or Active Key Function

båíÉê ^Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉå

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=ÅäáÉåík~ãÉ

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJU `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

2PressENTER.TheUtilityFieldDataCollectionortheDialReadEntryscreen

displays.

Utility Field Data Collection

Figure 2.7 Handheld Utility Field Data screen

Thisscreenvaries—orisnotused—dependingontheutility.Inthisexample,the

utilitycompanyrequiresadescriptionofmeterlocation.

1SelecttherelevantoptionandpresstheENTERkey.

bp` bñáíë=íÜÉ=~ééäáÅ~íáçå

Table2.3HandheldOptionsandActiveKeysforSpecialInstructions

Option or Active Key Function

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJV

Meter Information

AfterpressingENTER,theHandheldPCdisplaysthefollowingpromptsfordrive

constantandmeterreading.

Figure 2.8 Handheld Dial read entry screen

Themeterinformationscreendisplaysvariousoptionsfordriveconstant(also

knownasthemeterconstantordrivequantity).Residentialgasmetershavea

driveconstantof1or2(defaultvalue);commercialandindustrialmetershavea

driveconstantof5,10,50,100,or500.

1Selecttheappropriatedriveconstant.

Table2.4HandheldOptionsandActiveKeysforMeterReading

Option or Active Key Function

aêáîÉ=`çåëí~åí båíÉêë=ÇêáîÉ=Åçåëí~åíK

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=íÜÉ=åÉñí=çéíáçå

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=íÜÉ=êçìíÉ=ëí~íìë=ëÅêÉÉå

Installer must verify that the drive constant is the same drive constant as is noted on the

gas index.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJNM `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

2PressENTER.TheHandheldPCdisplaysthefollowingpromptsformeter

reading.

Figure 2.9 Handheld number of dials selection screen

•Themeterinformationscreendisplaysthefollowingoptionsforthenumber

ofreadingdials:4,5,or6.

•Thefirstdialcountedisthe1,000CF/rotation.Countuptothehighestdial.

Figure 2.10 Handheld Start counting dials on the right.

Table2.5HandheldOptionsandActiveKeysforNumberofDialsselection

Option or Active Key Function

kç=çÑ=aá~äë aáëéä~óë=Çá~ä=ÅçìåíK

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=íÜÉ=åÉñí=çéíáçå

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=íÜÉ=êçìíÉ=ëí~íìë=ëÅêÉÉå

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJNN

Numericfieldishighlightedformanualentryofmeterreadingfromexisting

meter.

Figure 2.11 Handheld dial read entry screen

Themeterreadingissometimesvalidatedbasedonutilityparameters,suchas:

•Previousreading

•Readdate

•Expectedrate(ccf/day)

• Allowablepercentagevariation(utilityspecific).

Ifthischeckisnotinplaceyouwillbepromptedtoenterthelastfournumbersof

themeterIDandtore‐entertheread.

1Enterreadingforexistingmeterinmeterreadscreen.Entervaluesfromright

toleft.

2PressENTER.Youarenowreadytoscanthechangeoutlabel.

Program the Meter Module

Thefollowingstepsapplytobothameterexchangeoramoduleretrofit.New

meterswithmodulesdonotrequireprogramming.

Table2.6HandheldOptionsandActiveKeysforMeterReading

Option or Active Key Function

MJV båíÉêë=êÉ~ÇK

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=íÜÉ=êçìíÉ=ëí~íìë=ëÅêÉÉå

If the meter reading does not pass validation, refer to the section on Meter Reading Out of

Range.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJNO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Begininstallingthegasmodulebyfollowingtheinstructionsinlaterchaptersof

thisGuide.

Figure 2.12 Handheld Initial programming screen

Programscreendisplaysthemeterinformationandpromptstheinstallerto

connecttothemetermodule.

1 ConnecttheHandheldPCtothemetermodule(refertoappropriate

installationprocedure).

2ChecktoensurethattheinformationthatyouenteredintotheHandheldis

correct,suchasdriveconstant,Indexread,andmeterID.Forexample,

dials=4,meterID=0123456G,meterconstant=2.

3PressENTERtobeginprogrammingthemetermodule.TheHandheldPC

willdisplaythefollowingscreensduringprogramming:

TheHandheldPCsearchesfortheconnectedmetermodule.Thisprocesswill

takeafewseconds.

Ifthemetermoduleisnotconnected,anerrorscreendisplays.RefertoʺSpecial

Casesʺonpage 2‐15formoreinformation.

Table2.7HandheldOptionsandActiveKeysforInitialprogramming

screen

Option or Active Key Function

pí~êí _ÉÖáåë=éêçÖê~ããáåÖ=íÜÉ=ãçÇìäÉ

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=íÜÉ=éêÉîáçìë=ëÅêÉÉå

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJNP

Themeterinformationisdownloadedtothemetermodule.Thisprocesstakesa

fewseconds.

Figure 2.13 Handheld enable tamper feature

IftheCPRendpointisequippedwithtampernotification,theinstallation

procedurepromptsyoutoindicatewhetheryouwanttoenableit.

Figure 2.14 Handheld Install complete

Confirmationthatprogramhasloaded.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJNQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure 2.15 Handheld redisplays information

MeterinformationredisplaystoverifythemeterreadandmeterID.

Table2.8HandheldOptionsandActiveKeysforProgrammingtheMeter

Module

Option or Active Key Function

vÉë ^ÅÅÉéíë=ãÉíÉê=êÉ~ÇáåÖ=~åÇ=ÅçåíáåìÉë=íç=åÉñí=~ÇÇêÉëëK

kç oÉíìêåë=íç=íÜÉ=ÄÉÖáååáåÖ=çÑ=íÜÉ=ÅìêêÉåí=~ÇÇêÉëëK

`çããÉåí båíÉê=áÑ=êÉèìáêÉÇK

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=çéíáçåë=vÉëLkçK

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJNR

SPECIAL CASES

Thissectiondetailscausesofproblemsduringaninstallation.However,thislist

maynotcoveralleventualities.

Meter Reading Out of Range

Ifthemeterreadingisoutofrangeduringstandardmeterinstallation,the

softwarepromptsforadditionalinformation(enterlastfourdigitsofmeterID,re‐

entermeterread,changemeterIDifdifferentthatexpected)beforeallowing

meterinstallation.

1VerifymetertypeandID.

aEntertheexistingmeterserialnumberintheHandheld.

erifytheexistingmeterserialnumbermatchestheexistingmeterserial

numberintheHandheld.

—Iftheexistingmeterserialnumberdoesnotmatchtheexisting

meterserialnumber,intheHandheld,verifytheaddress.

2Performtechnicalreviewofmeter.

EntertheappropriatecodeinyourHandheld,andthencallyourSupervisor

forsupport.

Figure 2.16 Handheld Read out of Range screen

ThesoftwarerequeststhelastfournumbersofexistingmeterIDtoconfirmthat

themeterbelongstothisaccount.IfmeterIDdoesnotmatch,theaccountaddress

isredisplayedforverificationordependingonutility,specificinstructions

display.

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJNS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

3EnterthelastfourdigitsoftheexistingmeterID.Thesoftwarerequests

verificationofthemeterread.Thishelpstoconfirmthattheinstallerisatthe

rightlocation.

Figure 2.17 Handheld Re-enter meter read

4Re‐entermeterreading.

Table2.9HandheldOptionsandActiveKeysforReadOutofRange

Option or Active Key Function

^JwI=MJV båíÉêë=íÜÉ=ãÉíÉê=fa

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=ãÉíÉê=êÉ~Ç=ëÅêÉÉåK

Table2.10HandheldOptionsandActiveKeysforReadOutofRange

Option or Active Key Function

MJV båíÉêë=íÜÉ=ãÉíÉê=fa

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=ãÉíÉê=êÉ~Ç=ëÅêÉÉåK

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJNT

Meter ID Confirmation

ThissectioncoverspossiblescreensgeneratedforinvalidmeterIDentries.

Figure 2.18 Meter already used

ThechangeoutmeterIDenteredwasusedonanotheraddress.

Change Meter ID

Iftheexistingmeterattheaccountaddressdoesnotmatchtheutilitydatabase,

youcanenterthecorrectmeterID.Ifso,enterskipcode“MeterIDmismatch”

andcallSupervisorforinstructions.ThisfunctionupdatestheHandHeld—even

thoughtheexistingmeterwillbereplacedwiththenewchange‐outmeter.

Figure 2.19 Handheld Meter ID Change screen

Table2.11HandheldOptionsandActiveKeysforMeterAlreadyUsed

Option or Active Key Function

lh oÉíìêåë=íç=ëÅ~å=ëÅêÉÉå

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=ëÅ~å=ëÅêÉÉåK

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJNU `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Skips

Insomesituations,youcannotinstallagasmoduleorreplacetheexistingmeter.

Youmustskipit;forexample,themeterislocatedinthehouseoranenclosed

areaandrequiresyoutomakearrangementswiththecustomerforaccess.

Figure 2.20 Options on address screen

1SelecttheSkipoptionintheaddressscreenandpressENTERorS.TheSkip

screendisplays.

Figure 2.21 Handheld Skip screen

ChoicesontheSkipscreeninclude:

•Noaccess

•Keyneeded

• Lockingring

• Unsafeconditionexists

•Medical

•Dog

• Appointmentneeded

•NoMeter

•MeterDamaged

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJNV

•Red/YellowTag

•Diversion

•Violencecode

•Buriedmeter

•Tiltedmeter

•Foundmeter

• DisconnectedorShutoffmeter

•Obstacle/Blocked

2SelectreasonforskippingmeterandpressENTER.

3SelectOKtoacceptreasonforskippingmeterID.Ifyouwanttoadda

comment,selecttheCommentoption.Thesoftwaredisplaystheselectedskip

causeandrequestsconfirmationtoskipmeterinstallation.

Figure 2.22 Handheld Skip Confirmation screen

Table2.12HandheldOptionsandActiveKeysforSkips

Option or Active Key Function

vÉë ^ÅÅÉéíë=éêçÄäÉãë=Çáëéä~óÉÇ=~åÇ=êÉíìêåë=íç=~ÇÇêÉëë=

ëÅêÉÉåK

kç=^ÅÅÉëë fë=íÜÉ=Ñáêëí=çÑ=~=äáëí=çÑ=ëâáé=ÅÜçáÅÉë=Çáëéä~óÉÇ=áå=íÜáë=ÑáÉäÇK

`çããÉåí ^ääçïë=íÜÉ=áåëí~ääÉê=íç=ÉåíÉê=ÅçããÉåíëK

båíÉê pÉäÉÅíë=çéíáçåë=kç=^ÅÅÉëëI=vÉëI=kçI=`çããÉåíK

^êêçï=`ìêëçê=m~Ç pÅêçääë=íÜêçìÖÜ=ëâáé=ÑáÉäÇëK

bp` oÉíìêåë=íç=~ÇÇêÉëë=ëÅêÉÉåK

Table2.13HandheldOptionsandActiveKeysforSkipConfirmation

Option or Active Key Function

vÉë ^ÅÅÉéíë=ëâáé=Å~ìëÉ=~åÇ=Çáëéä~óë=íÜÉ=åÉñí=~ÇÇêÉëë=

ëÅêÉÉåK

kç= oÉàÉÅíë=íÜÉ=ëâáé=Å~ìëÉ=~åÇ=êÉíìêåë=íç=íÜÉ=ÅìêêÉåí=~ÇÇêÉëë

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJOM `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

4SelectYEStoskipmeterID.Thesoftwarerecordstheskipintheroutestatus

andproceedstothenextaddress.

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=vÉëLkçK

bp` oÉíìêåë=íç=ÅìêêÉåí=~ÇÇêÉëë=ëÅêÉÉåK

Table2.13HandheldOptionsandActiveKeysforSkipConfirmation

Option or Active Key Function

Medical alert is not normally used on gas (medical alert tags are commonly found on the

electric meter).

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJON

OTHER FEATURES

Thefollowingfunctionsarenotdirectlyrelatedtotheinstallationprocess,butare

importantfeaturesoftheHandheldPC.

Problems

Youcanindicateuptofourproblemstorecordinaroute’srecord.

’

Find

UsetheFindfeaturetolookupaddresses,meterdata,androutestatistics.

1SelectFINDfromtheCustomerAddressscreen.

Figure 2.23 Handheld Find Screen

Table2.14HandheldOptionsandActiveKeysforRouteStatus

Option or Active Key Function

mêçÄäÉã=ÇêçéÇçïå=äáëí aáëéä~óë=éêçÄäÉã=çéíáçåë

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=vÉëLkçK

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=éêÉîáçìë=ëÅêÉÉå

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJOO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Meterdataoptionsinclude:

•WorkOrder

•MeterID

• Address

•CustomerName

•LANAddress

RouteStatusOptionsinclude:

• Exchanged

•All

•ToDo

•Completed

•Skipped

Selectsearchcriteria.Twosearchcriteriamustbeselected:meterdataandroute

status.Forexample,usetheArrowCursorPadtoselectAddress(meterdata)and

Completed(routestatus)tosearchalladdressesthathavebeencompleted.

Figure 2.24 Handheld Sample search list

ScreenshowsallrecordscontainingthecharactersenteredintheFindfield.

Table2.15HandheldOptionsandActiveKeysforFind

Option or Active Key Function

pÉ~êÅÜ=Äó aáëéä~óë=ãÉíÉê=Ç~í~=ëÉ~êÅÜ=çéíáçåëK

qÉñí=ÑáÉäÇ båíÉê=Ñìää=çê=é~êíá~ä=~ÇÇêÉëë=áåÑçêã~íáçå=íç=êÉÇìÅÉ=íÜÉ=äáëí=

êÉíìêåÉÇ

o~Çáç=Äìííçåë vçì=Å~å=å~êêçï=óçìê=ëÉ~êÅÜ=íç=êÉíìêå=çåäó=bñÅÜ~åÖÉÇI=qç=

açI=`çãéäÉíÉÇI=pâáééÉÇI=çê=^ää=êçìíÉëK

båíÉê pÉäÉÅíë=ÜáÖÜäáÖÜíÉÇ=çéíáçåK

^êêçï=`ìêëçê=m~Ç pÅêçääë=íÜêçìÖÜ=ëÉ~êÅÜ=ÑáÉäÇë=~åÇ=ÜáÖÜäáÖÜíë=çéíáçåë

bp` oÉíìêåë=íç=ÑìåÅíáçå=ëÅêÉÉåK

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ OJOP

• AlphanumerickeysareactiveintheFindfield.

• Horizontalscrollbarisenabledifthetextextendsbeyondthescreen,asin

thisexample.

• ArrowkeysmovethecursorfromtheFindfieldtothedatarecords.

•Space(SP)keymovesfromaddressestoFindfield.

2SelectOKorOtoacceptsearchcriteriaanddisplaysearchrecords.

3GobacktotheSearchlist,andtypeElmtosearchalladdresseswith“Elm”in

therecord.ThenselecttherelevantonebyusingthespaceSPkeytomove

fromaddressestoFindfield.

4UsetheArrowCursorPadtomovethecursortothedatarecordsanduse

ENTERtoselectthedesiredrecord.

Fromthisscreen,additionalinformationmaydisplayoryoucanmodifythedata

record(forexample,reinstallmeter,recordproblemconditions,orchangestatus

toskipmeter).

Table2.16HandheldOptionsandActiveKeysforsamplesearchlist

Option or Active Key Function

^JwI=MJV båíÉê=ëÉ~êÅÜ=íÉñí=áåíç=íÜÉ=cáåÇ=ÑáÉäÇK

^êêçï=`ìêëçê=m~Ç pÅêçääë=íÜêçìÖÜ=ëÉ~êÅÜ=ÑáÉäÇë=~åÇ=ÜáÖÜäáÖÜíë=çéíáçå=

^ÇÇêÉëëI=qçaçI=lâK

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

bp` oÉíìêåë=íç=ÑìåÅíáçå=ëÅêÉÉåK

Table2.17HandheldOptionsandActiveKeysforsamplesearchrecord

Option or Active Key Function

_~Åâ oÉíìêåë=íç=cáåÇ=ëÅêÉÉå

båíÉê p~îÉë=~åó=ÅÜ~åÖÉë=~åÇ=~Çî~åÅÉë=íç=íÜÉ=åÉñí=ëÅêÉÉåK

^êêçï=`ìêëçê=m~Ç eáÖÜäáÖÜíë=çéíáçåë=Ä~Åâ=çê=fåëí~ääK

rëáåÖ=íÜÉ=e~åÇeÉäÇ=aÉîáÅÉ

OJOQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ PJN

CHAPTER 3 ON-SITE PREPARATION

ARRIVAL AT INSTALL SITE

1Uponarrivingattheinstallationsite,verifytheaddressintheHandheld.

ChecktheHandheldforspecialinstructionsforthatsite(forexample,

medicalcustomer,dog,keyrequiredforaccesstometer,meterlocation,and

soon).IfamedicalalertcodeappearsintheHandheldforthataddressthey

aretoskiptheinstallenteranappropriateskipcodeandmovetothenext

exchange.Amedicalalerttagmaybelocatedontheelectricmeter.

2Iftheinstallerscomeacrossanymeterswhereamedicalalertcodeappearsin

theHandheldforthataddresstheyaretodiscontinuetheexchange,enterthe

appropriateskipcodeandmovetothenextexchange.PriortoMeter

ExchangeorModuleRetrofit

1VerifythatthemeterIDofthemeterattheaddressisthesameasthatinthe

Handheldrecord;ifnot,verifyitasecondtime.IfthemeterIDdoesnot

match,recordtheinformationtoincludemismatchedIDonhardcopy,record

skipcodeofmeterIDmismatchandcallyourSupervisorfordirection.

2Checktoverifythatthesealisintactandpresent.Ifthemeterisunsealedand

thereisnoevidenceoftamperingcompletethemeterexchangeormodule

retrofit.Ifthereissuspectedtamperingorevidenceofdiversiondonot

completetheinstall,recorddiversiononhardcopyandenterskipcodeof

diversioninHandheldandcallyoursupervisorimmediately.

3Ifthepremiseisvacantandtheserviceisshutoffattheserviceriservalve,

completethemeterexchangeifatallpossible.Ifyouareunabletogainaccess

tothepremisefinishyourroute,thentryagainbeforereturningtotheCross

Dock.EnterappropriatecodeinHandheld.

4Inspectthemeterforanygasleaks,unsafeconditions,excessiverustingor

damage.Whileperformingthistechnicalreviewlookoverthemeterforpoor

conditionsuchasexcessesrust,tampering,orodorofgas.Ifyoujudgethe

meterisseriouslydamagedreportitthanentertheappropriatecodeinthe

Handheldandcallyoursupervisorfordirections.

5Ifitisdeterminedthatthemeterhasnounsafeconditions,youarereadyto

proceedwiththemoduleretrofit.Datawillberequiredtobeenteredintothe

Handheld.Ifthereadingisoutofrange(indicatedbyapromptonthe

Handheld),thenretypethemeteridentificationnumberʹslastfourdigitsto

re‐verifythecorrectmeter.Reenterthegasmeterindexreadintothe

Handheld.

låJpáíÉ=mêÉé~ê~íáçå

PJO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

SeeʺResidentialMeterModuleRetrofitʺonpage 5‐1andʺCommercialand

IndustrialMeterModuleInstallationʺonpage 6‐1forinformationaboutmodule

exchangeinstructions.

6Ifthemeteristobeexchangedanditispartiallyburied,enteraskipcodeof

“buried”,andmovetothenextaccount.Ifatiltedmeteristobeexchanged,

performtheexchangeandcorrectthetilt.Ifamoduleistobeinstalledona

tiltedmeter,completetheinstall,andenteraskipcodeof“titled”.

7Iftheinstallercomesacrossaviolentorthreateningcustomer,immediately

leavethepremiseandcallyourSupervisor.Ifnecessary,dial911,afterwhich

youwillenterintotheHandheldandonthehardcopyaskipcodeof

“violencecode”.

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ QJN

CHAPTER 4 GAS METER EXCHANGE



METER EXCHANGE PROCESS

Arriving at the Location

1Theinstallerconfirmsthatheisattherightrouteaddressforthat

appointmentusingtheHandheld.Theinstallerarrivesatthelocationon‐time

andwithallthetoolsandequipmentnecessarytocompletetheinstallation

withouthavingtoreturntohisorhervehicle.Ifapplicable,locatetheoutside

shutoffvalveincaseoftroubleoremergency.

2Whenthecustomeranswersthedoor,introduceyourselfandstatethereason

foryourvisit.

–Verifythatthecustomerisatleasteighteenyearsofage.

– ShowthecustomeryourID.

3 Confirmthenatureoftheappointmentandthetimecommitmentrequired

fromthecustomer.Makesurethecustomerknowsandagreesthatitis

convenientforyoutoturnoffthegasduringtheinstallationprocess.

Verifying the Meter Site

Locatethemeterandconfirmtheexistingmeternumber,type,andsize.

–Ifthemeternumberiscorrectbuttypeandsizedonotmatchthe

equipmentthatyouhavebeenissued,callyourSupervisorandrequest

theappropriateequipment.

–Ifthemeteriddoesnotmatchtheinformationinthehandheld,callyour

Supervisorformeternumberverification.

–Ifallinformationiscorrectcontinuetheinstallationprocess.

–Priortoproceedingwiththemeterexchangeprocess,inspectthe

conditionofthegasregulator.Itmaybenecessarytoreplaceadefective

regulator.Followtheutility‐specificguidelinesforregulatorexchange.

d~ë=jÉíÉê=bñÅÜ~åÖÉ

QJO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Confirming Proper Installation Conditions

1Fortheinstallationtoqualify,confirmallofthefollowingpre‐existing

conditions:

–Visuallyexaminetheshut‐offforsignsofleakingordisrepair.

–PerformthesnifftestforsignsofgasleaksusingtheNaturalGas

DetectionDevice,andthenthesoaptestontheshutoffandcouplings.

–NoDiversionorTamperingEvident‐Visuallyinspecttheservicetothe

meterforsignsofdiversionortampering.

– AppropriateAccess‐Confirmthataccesstothemeterallowsaminimum

workareatobeestablished.Minimumworkareaincludeswrench

clearance,accesstoshut‐off.

– AppropriateService&PipingCondition‐Visuallyinspecttheservice

andpipingageandcondition.Confirmthatserviceandpipingarefitfor

theremovalandinstallationofanewmeterandthatthereisnopre‐

existingleaks.

– AppropriateMeterOrientation‐Confirmthemeterisinstalled

horizontallyorsuchthatthemeterexchangecannottakeplace.

–Ifanypre‐existingconditionsarefoundcontactyourSupervisor

immediately.TheSupervisorwillconfirmyourassessmentandgiveyou

directionforcompletingtheinstallationortoissueaskipcodeinthe

Handheld.

2Setuptheareaforinstallation.Turnallpossiblelightingon(forinsidesets).

Clearanappropriateworkspaceandlayoutalltools,equipment.Preparefor

leaksoremergencyshut‐off.

Shutting Off the Service

1Notifythecustomerthatgasservicewillbeinterrupted(reconfirmallgas

apparatusesareoff).Inspectfortheproperoperationofeachgasappliance.

Inspectthemetersetforcorrosion,burialoroverbuilding,damage,improper

installation,misalignment,outdatedregulator(Model1213Bor043R),orthe

smellofnaturalgas.

2 Connectthebondingjumperfromservicerisertothepremiseline.Verifythat

theexistingmeterisoffbyisolating(shutoff)allgasapparatusesandconfirm

thatthereisnoflowonthemeterandregister.Ifthemeterisnotfunctioning

correctly,contacttheSupervisorimmediately.TheSupervisorwillconfirm

yourassessmentandgiveyoudirection.

3Manuallyclosethecustomerʹsshutoffvalve.

–Ifyouhaveanyproblemclosingthevalve,contactyourSupervisorfor

directionwhichmayinclude,ifapplicable,usingtheoutsidecurbstopfor

shut‐off.

–Iftheoutsidecurbstopisactivated,theSupervisorwillnotifytheUtility

Supervisor.

4Removetheoriginalmeter.

aUsingapipewrenchandbackup,attempttoloosenthemetercoupling

nuts.

bUsemildtorquebuildingtomoderatesteadytorqueuntilthecoupling

nutbeginstoturn.

cDonotjerkorsnapthewrenches,ordamagecouldoccur.

d~ë=jÉíÉê=bñÅÜ~åÖÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ QJP

d Loosenbothcouplingnutsandremovetheoldmeterfromthemeterset.

Ifyouhaveanyproblemlooseningthecouplingnutscontactyour

supervisorfordirection.

eRemovealloldgasketmaterialinthecouplingnutswhenapplicable.

Inspecttheregulatorandexchangeifitisdamagedordefective.

Installing the New Meter

1Removethenewmetertagfromthenewmeter.

2Writeinstalldate,address,andinitialsonnewmetertag.

3Placenewmetertagontheoldmeterregister.

4Insertnewgasketswhereapplicable.

5 Exchangetheregulatorifdamagedoroutdated,andexchangeanydamage

insulatingunions.Levelthemetersetifthesetistilted.

6Tightentheinlet‐couplingnut.

7Installpressuregaugetometeroutlet,slowlyopentherisevalve,andadjust

regulatortoappropriategaspressureatthemeteroutlet.

aClosetheriservalveandremovegauge.

bVerifymeteroperation.

c Reconnecttheoutletpiping.

8Beforere‐servicing‐ifservicewasshutoffpriortothemeterexchange,donot

restoreservice.

Restoring Service, Purging the Air, and Performing the Leak Test.

1Opentheshut‐offvalveveryslowly.

–IfyouhaveanyproblemopeningthevalvecontactyourSupervisorfor

direction.

2Checkthetestdialformovementtomakecertainnoleaksoccurredwhile

performingtheinstallation.

aSealtheregulator.

b Disconnectthebondingjumper.

cCleanandpaintthemeterset.

3Checkthecouplingnuts,serviceandpipingforleaksperform“leaktest”

(snifftestforsignsofgasleaksusingtheNaturalGasDetectionDevice,and

thesoaptest)andre‐tightenifnecessary.

4 Reenterthepropertyandpurgetheairfromthegaslinebybleedingthe

furthestgasapparatusfromthemeter.Youmustbleedeachindividual

apparatus.

During the installation, replace all biscuits in the outlet piping, and leave meter off “as

found”.

d~ë=jÉíÉê=bñÅÜ~åÖÉ

QJQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Relighting All Apparatuses and Confirming Their Operation

FollowtheprocedureprovidedtoyoubytheUtilityforappliancerelighting.If

anyadverseconditionsarise,immediatelyshutoffthegas,contactyour

supervisorforinstructions,andrecordtheappropriatecommentintheHandheld

suchas,red/yellowtagdefectiveappliancesituation.EnteraSkipcodesuchas,

“red/yellowtag”intheHandheld.

Programming the Module

RefertoChapter 2,UsingtheHandHeldDevice,Chapter 5,ResidentialMeterModule

Retrofit,orChapter 6,CommercialandIndustrialMeterModuleInstallation.

Performing Data Collection

1SeeChapter 2,UsingtheHandHeldDevice.

2Sealthenewmeter.

Cleaning Up the Work Area

Cleanupallinstallationtools,equipmentanddebris.Turnoffanylightsthatyou

mayhaveturnedon.Restorethecustomerpremisetothepre‐visitcondition.

Exiting the Premise

1Doalastchecktoensurethatyouhaveallofyourequipmentandtools.

2 Thankthecustomerforallowingustoservicetheirgasmeter,exitthe

premise,andprovidethecustomerwithadoorhanger.

MODULE RETROFIT (INDEX OR REGISTER) REPLACEMENT

RefertoChapter 5,ResidentialMeterModuleRetrofitorChapter 6,Commercialand

IndustrialMeterModuleInstallation.

CUSTOMER SKIP OR CANCELLATION

Ifthecustomerʹsexistingconditionsdonotqualifyfornewmeterinstallation

notifyyourSupervisor.WaitatthesiteuntilyourSupervisorarrivesforfurther

instructions.If,intheSupervisorʹsopinion,theconditionofthecustomerʹs

existingservicepipingorappliancesissuchthatsignificantdamagewouldresult

fromattemptingtoremoveandreplacetheexistinggasmeter,yourSupervisor

willsoinformtheUtilityofthecondition.TheSupervisorwilladviseyouto:

• Informthecustomerastowhythechange‐outwillnottakeplace.

•Documentsituationinhandheld.

•Directyoutoyournextappointment.

d~ë=jÉíÉê=bñÅÜ~åÖÉ

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ QJR

If There Is Damage On Site When You Arrive

• CallyourSupervisorimmediately.Communicatethegravityofthesituation.

Heorshewillimmediatelyinitiateanynecessaryactions.

•Donotleavethecustomersiteuntildirectedtodoso.

•Itmaybenecessarytodial911.

IMMEDIATELY turn off the gas. This will eliminate or minimize any property

damages to customer.

Notes:

QJS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

d~ë=jÉíÉê=bñÅÜ~åÖÉ

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

American Installation

Figure 5.1 American: Meter Module before installation

1Followsteps1‐4inʺToBeginResidentialMeterModuleRetrofitʺonpage 5‐1.

Figure 5.2 American: meter with index and index cover

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJP

2Removetheindexdialsfromthegasmeter.Alsoremovealloftheoriginal

gasketmaterial.Replacetheindexifitisdamagedorifthegearsare

discolored.

WHENREPLACINGANINDEXYOUMUSTENTERTHEMETERREAD

INTOTHEHANDHELDANDINTHECOMMENTSECTIONWRITE

“INDEXEXCHANGED”.ForIndexvisualverificationandexchangeon

AmericanmetersseeAppendix B,VisualInspectionofIndexes.

Figure 5.3 American Removing the Index (one screw on each side)



3Cleantheareabehindtheindexandcovergasketsurfaceonthemeterwitha

wirebrushandgasketscraper.

4Makesurethatthelocationofthedialsonthemeterisfreeofanydebristhat

mayhampermoduleinstallation.

5Slidetheindexattachmentclipsouttothesidesbeforebeginningtoinstall

moduleonmeter.

Figure 5.4 American: Sliding the Index attachment clip out (one per side)

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

6AlignthemeterdrivedogwiththemodulewigglerandinstalltheMeter

Modulebasetothemeterbyscrewinginthetwocapturedstandoffscrews.

Thetorquerequirementforfasteningthescrewsis10inch‐pounds.For

modulesmanufacturedstartinginMay2005,forproperalignmentsee

Appendix A,AligningtheNewAmericanMeterDriveDog.

Figure 5.5 American: Aligning the drive dog

Figure 5.6 American: Attaching the Meter Module onto the meter by screwing in two stand-off

fasteners

Check the wiggler on the meter module for free movement. Wiggler should turn at least 10

degrees but no greater than a 1/4 turn. If it is binding, then disassemble and realign. This is

also known as the “wiggle” test.

Improper alignment or tightening of the standoff screws may result in module or meter

failure.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJR

7 AttachtheindextotheMeterModulehousingwiththecapturedclipsonthe

standoffscrews.Besurethattheclipsareextendedfullytowardstheoutside

edgeofthemodulewhenyoufittheindextothemodule,andaligntheindex

dogoftheindextothemoduleʹswiggler.Pushthetwoclipstowardsthe

insideofthemoduletosecuretheindex.Aftertheindexisinstalled,the

installermustturntheprovingdialontheindextoensuretheindexis

properlyengagedwiththemodule.

Figure 5.7 American: Installing Index on standoff screws

Figure 5.8 American: Sliding the Index clip in

Use torque screwdriver set at 10 inch-pounds to install the two captured standoff screws

for all module installations.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

8Plugthebatteryintotheprogrammingportpowercableandplaceitinthe

batterycompartmentwiththebatterywiresontop.

Figure 5.9 American: Connecting the battery

Figure 5.10 American: Installing the battery with the battery cable on top

Figure 5.11 American: Properly installed battery



oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJT

9UtilizetheRFBustertoverifymoduleistransmitting,holdtheRFBusterwith

magnetsidetothetopupperleftquadrantofthemoduleplasticcoverand

holdthebuttonuntil10beepsarereceived.SeeAppendix C,UsingtheRF

Busterformoreinformation.

Figure 5.12 American: Meter module with cover and tamper seals installed

10 InstallthecoverontheMeterModulebase,usingthefourscrewsthatwere

provided.Tightenthescrewsuntilthecoversitssnug,thentightenan

additionalquarterturn.

11 Installnewredtampersealsovertwodiagonalscrews(upperrightandlower

left,orupperleftandlowerright).

12 Cleanupanydebrisfromtheretrofitandinstallationprocesses,andleavea

doorhangertagwithanyappropriateinformationfilledin.Makesureto

alwaysleaveadoorhanger.

13 Attheendoftheday,theinstallerreturnstotheCrossDockforthecheck‐in

process.Theinstallershouldalsoturnininventoryofunused,defective,or

brokengasMeterModules.TheInstallermustcheckinallHandheldsissued.

Theinstallerisresponsibleforreconcilinganydiscrepanciesinchangeddata

beforethecheck‐inprocesscanbecompleted.MetersModuleswillnotbe

checkedouttoaninstallerwhohasnotcompletedthepreviousdayʹscheck‐in

process.

Magnetlocation

for“busting”

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJU `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Rockwell/Equimeter/Sensus Meter Module Installation

Figure 5.13 Rockwell/Equimeter/Sensus: meter module before installation



Figure 5.14 Rockwell/Equimeter/Sensus: meter

1Followsteps1‐4inʺToBeginResidentialMeterModuleRetrofitʺonpage 5‐1.

Figure 5.15 Rockwell/Equimeter/Sensus: Meter with tamper seals and index cover removed



oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJV

2Removetheindexandalloftheoriginalgasketmaterial.Cleanthearea

behindtheindexonthemeterwithawirebrushandgasketscraperto

removealldebris.

Figure 5.16 Rockwell/Equimeter/Sensus: Removal of index cover gasket



3InsertthetwoscrewsthroughtheindexandthroughtheMeterModulebase.

Ensurethatthemoduleʹswigglerandthemeterdrivedogoftheindexare

properlyaligned.

Figure 5.17 Rockwell/Equimeter/Sensus: Meter Module and index with screws in place ready for

assembly



4WhileholdingtheindexandMeterModulebasetogether,alignthemeter

drivedogwiththemodulewiggler.Thetorquerequirementforfasteningthe

screwsis4‐8inch‐pounds.RefertoʺRockwell/Equimeter/Sensus:Attachingthe

MeterModuleandindextothemeterʺonpage 5‐10.



Do not over tighten the standoff screws; if module wiggler and meter drive dog are not

aligned properly it may result in a meter failure.

Check the wiggler on the meter module for free movement. The wiggler should turn at

least 10 degrees, but no greater than 1/4 turn. If it is binding, then disassemble and

realign. This is also known as the "wiggle" test.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJNM `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ



Figure 5.18 Rockwell/Equimeter/Sensus: Attaching the Meter Module and index to the meter

5Gentlywigglethetwo‐footprovingdialtomakesurethegearsaremeshed

properly.Thereshouldbenogreaterthan1/4turnplay.

All of the original gasket and all debris must be completely removed or it will result in a

module and meter failure.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJNN

6Plugthebatteryintotheprogrammingpowercableandplaceitinthebattery

compartmentwiththebatterywiresontop.

Figure 5.19 Rockwell/Equimeter/Sensus: Connecting the battery

Figure 5.20 Rockwell/Equimeter/Sensus: Correct battery orientation (connector on top)

Figure 5.21 Rockwell/Equimeter/Sensus: Battery properly installed

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJNO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

7UsethefourremainingscrewstoinstallthecovertotheMeterModulebase,

tighteningthescrewsuntilthecoversitssnug,thentightenanadditional

quarterturn.

Figure 5.22 Rockwell/Equimeter/Sensus: Installing the Meter Module cover



You can mount an Equimeter module to a Rockwell/Equimeter Residential Gas meter using

only two screws, as long as you use one of the following configurations (based on the

image below): A-D, B-C, or A-B. If screws cannot be properly installed, replace with

threaded inserts and 8-32 scews.

Figure 5.23 Rockwell/Equimeter/Sensus: two-screw configuration

Configurations C-D, B-D, and A-C are unacceptable. These are not strong enough to

exclude rainwater.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJNP

8Installnewredtampersealsoverdiagonalscrews(upperrightandlowerleft,

orupperleftandlowerright).

Figure 5.24 Rockwell/Equimeter/Sensus: Correctly installed Meter Module



9UtilizetheRFBustertoverifymoduleistransmitting,holdtheRFBusterwith

magnetsidetothetopupperleftquadrantofthemoduleplasticcoverand

holdthebuttonuntil10beepsarereceived.RefertoAppendix C,UsingtheRF

Buster.

10 Cleanupanydebrisfromtheretrofitandinstallationprocesses,andleavea

doorhangertagwithanyappropriateinformationfilledin,ifdoorhangers

arespecifiedduringinstallertrainingforthatutility.Makesuretoalways

leaveadoorhanger.

11 Attheendoftheday,theinstallerreturnstotheCrossDockforthecheck‐in

process.Theinstallershouldalsoreturnunused,defective,orbrokenGas3

MeterModules.TheinstallermustcheckinallHandheldsissuedatthestart

oftheshift.Theinstallerisresponsibleforreconcilinganydiscrepanciesin

changeoutdatabeforethecheck‐inprocesscanbecompleted.MeterModules

willnotbecheckedouttoaninstallerwhohasnotcompletedtheprevious

dayʹscheck‐inprocess.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJNQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Sprague/Schlumberger/Actaris Meter Module Installation

Figure 5.25 Sprague/Schlumberger/Actaris: Meter Module before installation



Figure 5.26 Sprague/Schlumberger/Actaris: Meter

1Followsteps1‐4inʺToBeginResidentialMeterModuleRetrofitʺonpage 5‐1.

Figure 5.27 Sprague/Schlumberger/Actaris: Removing the index cover

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJNR



2Removetheindexandindexscrewsfromthemeter.Inspecttheindexforany

signsofdamage.Ifdamaged,replacetheindex.RefertoAppendix B,Visual

InspectionofIndexesformoreinformation.Alsoremovealloftheoriginal

gasketmaterial,ifany.

Figure 5.28 Sprague/Schlumberger/Actaris: Removing the index

3Cleantheareabehindtheindexandthecovergasketsurfaceonthemeter

withawirebrushandgasketscraper.Ensuretheentireareaisfreeofdebris.

Figure 5.29 Sprague/Schlumberger/Actaris: Removal of index cover gasket



oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJNS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

4InsertthetwoPhillipsheadscrewsthroughtheMeterModulebase.

Figure 5.30 Sprague/Schlumberger/Actaris: Meter Module pre-assembled



5AligntheMeterModulebasetothemeter.LeadtheIndexscrewsintothe

meter.Ensurethatthemoduleʹswigglerandthemeterʹsdrivedogarealigned

properly.Onlyengagescrews1turn,leaveclearancetoslidetheindexunder

thescrewheads.

Figure 5.31 Sprague/Schlumberger/Actaris: Alignment of the meter drive dog and screws

Figure 5.32 Sprague/Schlumberger/Actaris: Meter Module base attached to meter, ready to slide on

dials

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJNT

6Installtheindexbyslidingthetabsontheindexundertheheadsofthescrew

andtighteningthescrews.Thetorquerequirementis4‐8inch‐pounds.Ensure

thatthemoduleʹswigglerandthemeterdrivedogoftheindexareproperly

alignedbeforetighteningthescrews.Alsoensurethatthemoduleisnot

boundupbycheckingthe2Footdialtoensurethatithasbetween1/4and1/2

turnplayinit.

Figure 5.33 Sprague/Schlumberger/Actaris: Securing index and checking for free movement of

wiggler-

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJNU `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

7Plugthebatteryintotheprogrammingpowercableandplaceitintothe

batterycompartmentwiththebatterywiresandconnectorinback(see

Figures36,37,and38).

Figure 5.34 Sprague/Schlumberger/Actaris: Connecting the Battery

Figure 5.35 Sprague/Schlumberger/Actaris: Correct Battery Orientation

Figure 5.36 Sprague/Schlumberger/Actaris: Battery Correctly Installed

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJNV

8UsetheremainingtwoscrewstoinstallthecoverontheMeterModule,

tighteningthescrewsuntilthecoversitssnug,thentightenanadditional

quarterturn.Insertthetworedtamperseals.

Figure 5.37 Sprague/Schlumberger/Actaris: Fasten Cover Screws and Insert Tamper seals

9UtilizetheRFBustertoverifymoduleistransmitting,holdtheRFBusterwith

magnetsidetothetopupperleftquadrantofthemoduleplasticandholdthe

buttonuntil10beepsarereceived.

10 Cleanupanydebrisfromtheretrofitandinstallationprocesses,andleavea

doorhangertagwithanyappropriateinformationfilledin,ifdoorhangers

arespecifiedduringinstallertrainingforthatutility.

11 Attheendoftheday,theinstallerreturnstotheCrossDockforthecheck‐in

process.Theinstallershouldalsoturnininventoryofunused,defective,or

brokengasMeterModules.TheinstallermustcheckinallHandheldsissued

atthestartoftheshift.Theinstallerisresponsibleforreconcilingany

discrepanciesinchangeoutdatabeforethecheck‐inprocesscanbe

completed.MeterModuleswillnotbecheckedouttoaninstallerwhohasnot

completedthepreviousdayʹscheck‐inprocess.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJOM `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Lancaster/National Meter Module Installation

BeforebeginningtheLancasterretrofit,ensurethatthemeterisretrofittable.You

canidentifythisbytheplacementofthescrewsthatattachthedialstothe

module.Itisveryimportantthatyoudonotbreakthesealofthemeterdialcover

ifthisisnotaretrofittablemeter.

Figure 5.38 Lancaster/National: Meter retrofittable



Figure 5.39 Lancaster/National: Meter non-retrofittable

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJON



Figure 5.40 Lancaster/National: Meter Module before installation

Figure 5.41 Lancaster/National: Meter

1Followsteps1‐4inʺToBeginResidentialMeterModuleRetrofitʺonpage 5‐1.

Figure 5.42 Lancaster/National: Removing the index cover



oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJOO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

2Removetheindexfromthemeter.

Figure 5.43 Lancaster/National: Removing the index

3Removealloftheoriginalgasketmaterial,ifany.Cleantheareabehindthe

indexandthecovergasketsurfaceonthemeterwithawirebrushandgasket

scraper,ensurethattheentireareaisfreeofdebris.

Figure 5.44 Lancaster/National: Removal of index cover gasket

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJOP

4Removeoriginalone‐prongcouplerandreplacewithtwo‐prongedcoupler,

beingcarefulnottocrossthethreads.Thisdoesnothavetobetightenedsince

themeterturningwillkeeptensiononthedrivedog.

Figure 5.45 Lancaster/National: Installation of New Coupler

5InsertthetwolongerscrewsthroughtheMeterModulebase.

Figure 5.46 Lancaster/National: Meter Module pre-assembled

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJOQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

6 FastentheMeterModulebasetothemeter,ensuringthatthemoduleʹs

wigglerandmeterʹsdrivedogareproperlyaligned.Onlyengagescrews1

turn.

Figure 5.47 Lancaster/National: Alignment of the meter drive dog and screws

Figure 5.48 Lancaster/National: Meter Module base attached to meter, ready to slide on dials

7Installtheindexbyslidingthetabsontheindexundertheheadsofthescrew

andtighteningthescrews.Thetorquerequirementis10inch‐pounds.Ensure

thatthemoduleʹswigglerandthemeterdrivedogoftheindexareproperly

alignedbeforetighteningthescrews.Alsoensurethatthemoduleisnot

boundupbycheckingthe2Footdialtoensurethatithasbetween1/4and1/2

turnplayinit.SecuringIndexandCheckingforFreeMovementofDrive

Dog.

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJOR

8Plugthebatteryintotheprogrammingport/powercableandplaceitintothe

batterycompartmentwiththebatterywiresandconnectorinback.

Figure 5.49 Lancaster/National: Connecting the Battery

Figure 5.50 Lancaster/National: Correct Battery Orientation

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

RJOS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure 5.51 Lancaster/National: Battery Correctly Installed

9UsetheremainingtwoscrewstoinstallthecoverontheMeterModule,

tighteningthescrewsuntilthecoversitssnug,thentightenasadditional

quarterturn.Insertthetworedtamperseals.

Figure 5.52 Lancaster/National: Fasten Cover Screws and Insert Tamper seals

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ RJOT

10 Ifneeded,removeserialnumberplatefromoriginalcoverandinstallonnew

coverwithtwosmallscrewsprovided.

Figure 5.53 Lancaster/National: Replacing Serial Number Plate

11 UtilizetheRFBustertoverifymoduleistransmitting,holdtheRFBusterwith

magnetsidetothetopupperleftquadrantofthemoduleplasticcoverand

holdthebuttonuntil10beepsarereceived.SeeAppendix C,UsingtheRF

Busterformoreinformation.

Notes:

RJOU `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJN

CHAPTER 6 COMMERCIAL AND INDUSTRIAL METER MODULE

INSTALLATION

Thischapteroutlineschangeoutproceduresfor:

•AmericanCG3

• Rockwell/Equimeter/SensusMeterModuleInstallation

•Sprague/ActarisMeterModuleInstallation

•Schlumberger/ActarisMeterModuleInstallation

RefertoAppendix E,Difficult/Non‐compatibleCommercialRetrofitsfordifficultand

non‐compatiblemoduleinstallationinstructions.

TO BEGIN C&I METER MODULE INSTALLATION

Thefirstfourstepsforeverygasmetermoduleinstallarethesameforevery

manufacturer.Priortobeginningthecommercialmetermoduleretrofit,make

sureyouhavefollowedthestepsinʺIftheinstallerscomeacrossanymeterswherea

medicalalertcodeappearsintheHandheldforthataddresstheyaretodiscontinuethe

exchange,entertheappropriateskipcodeandmovetothenextexchange.PriortoMeter

ExchangeorModuleRetrofitʺonpage 3‐1.

1RemovethecoverfromtheMeterModule.

2PlugtheprogrammingcablefromtheHandheldintotheprogramming

powercableontheMeterModule.RefertoChapter 2,UsingtheHandHeld

Device.

3ProgramtheMeterModuleandchecktheHandheldforsuccessful

programming(example,Dials=4,MeterID=0123456G,MeterConstant=2).

4Removethetampersealsandindexcoverfromtheoriginalgasmeter.

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

SJO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

American CG3 Installation

Figure 6.1 American CG3: Meter before installation

1FollowthestepsinʺToBeginC&IMeterModuleInstallationʺonpage 6‐1.

2Removethetampercapsandindexcoverfromtheoriginalmeter.Remove

theindexfromtheindexcover.Cleantheworkareaswithawirebrushand/

orscraperasneeded.Removealloftheoriginalgasketifitisunserviceable.

InspectIndexforwearandgearfading.

Figure 6.2 American CG3:Removing the cover and index

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJP

3OpenthepackagecontainingtheMeterModule,screws,andbattery.

Figure 6.3 Common American meter module packaging with hardware on the right

Figure 6.4 American CG3: screw kit

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

SJQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure 6.5 American CG3: meter module kit

4Openthebagcontainingthebattery.Carefullyremovethebattery.

5Openthemetermodule.Avoidpullingthecables.

Figure 6.6 Open American CG3: module

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJR

6 ConnectthebatterytotheMeterModule.Assemblethebatteryintothe

retainingcliponthemetalbracket.

Figure 6.7 American CG3:Connecting the battery to the module

7 Connecttheprogrammingcablefromthehandheldcomputertothe

programmingportontheMeterModule.ProgramtheMeterModule.Check

thehandheldforsuccessfulprogramming(example‐Dials=4or5,MeterID

=0123456G,MeterConstant=5or10).

Figure 6.8 American CG3:Connecting the programming cable to the American Commercial meter

module

Route wire through cutout area so that wire is not pinched.

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

SJS `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure 6.9 American CG3: module route wire

8Slidethemetalbracket(notthegreencircuitboard)intotheslotsofthe

clamshell(oneoftheclamshellhalveshasslotsonoppositesidesofthe

interior).Ifyouarelookingdownintotheslots,thebatteryclipshouldbe

towardsthetop‐thelargecapacitorsonthecircuitboardgodeepintothe

clamshell.AssembletheMeterModulehalvestogetherwiththefoursmall

self‐tappingscrewsprovided.Thetorquerequirementis6‐10inchpounds.

Ensurethatthegasketisinplaceandthewiresarenotpinched.Installthe

tamperseals.

Figure 6.10 American CG3: module Index detail

Check condition of the index for looseness of index pointers on shaft, cracks on face

enamel, or peeling. Ensure that the index is not bound up. Replace the index if dials are

loose or locked, or if the enamel is cracked, loose or damaged.

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJT

9 Attachthenewindexcovertotheindexusingthescrewsprovided.The

torquerequirementis10‐inchpounds.Handletheindexcarefullytoavoid

breakingthecounterorindex.Ensurethatthecounterandindexareproperly

aligned.Verifythatthecounterisfullyengagedtotheindexpointer.

Figure 6.11 American CG3:module- Attaching the new Index cover

10 Attachtampersealsasshown.therearetwotampersealsfortheIndex‐to‐

Indexcoverconnections.

Figure 6.12 American CG3: tamper sealing for Index cover

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

SJU `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

11 Mounttheindexandcoverontothemeter.Placethegasketonthemeter

(replaceifnecessary),aligningtheholes.Securetheindextothemeterwith

thetwohex‐headscrewsprovided.Thetorquerequirementis20‐30inch

pounds.Installthetamperseal.

Figure 6.13 American CG3:l installing Index

12 Determinethebestorientationforthemountingbracket(seefollowing

configurations).Tochangethebracketorientation,removethetwoPhillips

headscrewsholdingthebrackettothemodule.Thebracketcanbeturnedor

flippedoverforthebestconfiguration.Cabletiemayneedtoberemoved.

Figure 6.14 American CG3: mounting bracket configurations

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJV

13 AttachthemountingbrackettothemeterusingthelargeFillisterscrews

provided.Useatampercupsealononeortwoofthescrews.Thetorque

requirementis30‐40inchpounds.Installthetwotamperseals.

Figure 6.15 American CG3:meter module with mounting bracket installed

14 Installtampercapsoverremainingfivescrews.

15 UtilizetheRFBustertoverifymoduleistransmitting,holdRFBusterwith

magnetsidetothetopupperleftquadrantofthemoduleplasticandholdthe

buttonuntil10beepsarereceived.SeeAppendix C,UsingtheRFBusterfor

moreinformation.

16 Cleanupanydebrisfromtheretrofitandinstallationprocessesandtieany

loosecableswithtiewraps.

17 Proceedtothenextinstallationsite.

18 Attheendoftheday,returntotheCrossDockforthecheck‐inprocess.Turn

ininventoryofunused,defective,orbrokengasMeterModules.Checkinthe

handheldcomputer.Theinstallermustreconcileanydiscrepanciesinthe

changeoutdatabeforethecheck‐inprocesscanbecompleted.Thecrossdock

willnotcheckoutanyMeterModulestoaninstallerwhohasnotcompleted

thepreviousdayʹscheck‐inprocess.

Rockwell/Equimeter/Sensus Meter Module Installation

TherearetwotypesofRockwellmodules:CenterandOffset.Theleftside

illustratescenterprovingdialandtherightsideillustratesoffsetproving

dial.Verifytheappropriatetypebeforestartinginstallation.

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

SJNM `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ

Figure 6.16 Rockwell/Equimeter/Sensus: Indexes before installation

1FollowthestepsinʺToBeginC&IMeterModuleInstallationʺonpage 6‐1.

2Removethetampercapsandindexcoverfromtheoriginalmeter.Removeall

oftheoriginalgasketifitisunserviceable.Cleantheworkareawithawire

brushandscraperifneeded.

3SelecttheappropriateMeterModule(Rockwell/EquimeterCenterorOffset).

OpenthepackagecontainingtheMeterModule,screws,andbattery.

Figure 6.17 Rockwell/Equimeter/Sensus: screw and meter module kits

4Openthebagcontainingthebattery.Carefullyremovethebattery.

5OpentheMeterModule,takingcaretoavoidpullingonthecables.

6 ConnectthebatterytotheMeterModule.Assemblethebatteryintothe

retainingcliponthemetalbracket.

7 Connecttheprogrammingcablefromthehandheldcomputertothe

programmingportontheMeterModule.ProgramtheMeterModule.Check

thehandheldforsuccessfulprogramming

8Slidethemetalbracket(notthegreencircuitboard)intotheslotsofthe

clamshell(oneoftheclamshellhalveshasslotsonoppositesidesofthe

interior).Ifyouarelookingdownintotheslots,thebatteryclipshouldbe

towardsthetop‐thelargecapacitorsonthecircuitboardgodeepintothe

clamshell.

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~íáçå

`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJNN

9 AssembletheMeterModulehalvestogetherwiththefoursmallself‐tapping

screwsprovided.Thetorquerequirementis6‐10inchpounds.Ensurethatthe

gasketisinplaceandthewiresarenotpinched.Installthetamperseals.

10 Installthenewindexcover.Gentlyslidethecoverovertheindextoavoid

breakingthecounter.Becarefulnottodamagethedials.Ensurethatthe

counterandindexesareproperlyaligned.Verifythatthecounterisfully

engagedtotheindexpointers.

Figure 6.18 Rockwell/Equimeter/Sensus: meter module installing Index cover

11 AttachthecoverandMeterModuletothemeter.Positionthemodule

bracketoverthecoverandalignthescrewholes.Thetorquerequirementis

30‐40inchpounds.

Figure 6.19 Rockwell/Equimeter/Sensus: securing index cover & Meter Module

Check condition of the index for looseness of index pointers on shaft, cracks on face

enamel, or peeling. Replace the index if dials are loose or bound up, or if enamel is cracked

or loose.

Landis Gyr Technology EC6R3S2 Commercial Gas Meter Module User Manual Installation Guide Part 1

Landis+Gyr Technology, Inc. Commercial Gas Meter Module Installation Guide Part 1

Contents

Installation Guide Part 1

Navigation menu

Namespaces

Views

Navigation