Lanxinqiao Technology AT01 Bluetooth anti-lost tag User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	2416923
Application ID	xlzx4SzuCn8P+ceH7zgEDA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.01kB (250086 bits)
Date Submitted	2014-10-13 00:00:00
Date Available	2014-10-13 00:00:00
Creation Date	2014-10-04 16:01:59
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2014-10-04 16:01:59
Document Title	Operation: (note:You can also enter the helpage to find user’s guide and FAQ from the icon on the top left corner.)
Document Creator	Microsoft® Office Word 2007
Document Author:	Administrator

一．Operation: (note:You can also enter the helpage to find user’s guide and FAQ
from
the icon on the top left corner.)
1.Install App on iPhone/iPad:
Enter App store and input “iFinder” in the search bar,download the free App.
2.Establish connection:
A.Install the button cell and shortly press the button of device,when LED glittering,the device
enter into working mode.
B.Open the Bluetooth function of your smart phone.
C.Click “iFinder”App to enter into “Device list” interface.(a-1 below),click “search” button to
search for devices,then click the name of your device to pair.It will return to home screen
automatically after pairing is completed(a-2).The home page will turn gray and each function is
unavailable when pairing failure.
三.Setting:
A.Setting alarm of smart phone:
Click “alarm”on home page to enter “searching device” interface(a-3), then click the ring icon on
the bottom right to set ring tone,back to home page after setting.
B.Rename device :
Click the “device” icon on home page to enter “My device” interface(a-4), then click the name of
the device to rename it.
C.Personalize Setting:Click the “setting” icon (图标）behind the name of device to enter into
“Setting” interface(a-5), you can personalize your corresponding device:Alarm distance,Phone
alarm,Device alarm,Alert time of smart phone.
D.Setting Alarm Distance:
Alarm Distance have 3 levels:Near (about 17ft)
Middle(about 33ft)
Far (about 99ft)
You can personalize the alarm distance upon your needs.
二．Seeking device in setting alarm distance.
A.Searching iFinder through voice.
1.Click the alarm button on home page to enter into “searching device” interface,click “Alarm”
icon to activate the alarm.
2.Click “Stop” to de-activate the alarm.
B.Finding your device through glittering light.
1.Click the “on” icon on “search device” interface,the LED of iFinder will glittering rapidly with
blue light.
2.Click the “off” icon on “search device” interface,the LED of iFinder will stop glittering.
三.Finding each other
1.Close your Bluetooth function or log out App,both your device and smart phone will start to
alarm.
2.Your smart phone and iFinder will start to alarm simultaneously when beyond the set
distance,and both devices will stop alarming when they are return back to the radius of the set
distance.
四.Long distance location and finding function.
1.Open the GPS function in your smart phone setting page.
2.In APP setting page,set alarm distance “Far”,and open the GPS function of map.
3.When beyond the setting distance,APP will make a sign “ ” to record the disconnect
position,click the icon “ ”in the map ,it will show the disconnect timing.
4.Click “location” icon in home page to enter into “location” page,press the location button
below,App will locate the current position of your smart phone in the map.There will be two
marks in the map,one is your current location,another is the disconnect location.You can estimate
the distance of two devices through the two marks.App can invoke the GPS function of your smart
phone,and make a prompt location along with the moving of smart phone.You can easily reach the
mark location through GPS function.
五.Remotely activate your camera&video recording
1.Click camera icon on the home screen to enter into camera mode,press the device button to take
photo.
2.Click video icon on the home screen to enter into video mode,press the device button to take a
video recording,and press the button again to stop and save.
3.After taking pictures or videos,you can back to home page to check them in photo album.
4.These function will not work if you are log out from the APP.
Note: The device has no ad-hoc function.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized changes and modifications to this equipment. Such
changes and modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct eth interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : Operation: (note:You can also enter the helpage to find user’s guide and FAQ from the icon on the top left corner.)
Author                          : Administrator
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2014:10:04 16:01:59
Modify Date                     : 2014:10:04 16:01:59
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools